Inspector jobs in Oxnard, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Fenagh Engineering and Testing is seeking a CWI Inspector with NDT to perform inspections for the shop/field. To include the following: audits, inspecting structural steel fabrication and erection, material identification, welding to include joint fit-up, in-process welding, completed welding, MT & UT as required by code, and high-strength bolting inspections. Ideally this candidate will be an AWS CWI with either their Level I or Level II UT/MT certification from an ASNT Level III. Evaluation from our Level III for both UT (shear wave)/MT will be conducted upon hiring. The position will be supporting clients in the Los Angeles area. ICC / CWI / NDT - MT & UT Level II General Responsibilities: Perform observation and inspection in the shop & field. Collect MTR's for heat numbers and tracking. VT on members in progress. UT CJP's as needed. MT Fillet Welds as needed. High-strength bolting inspections & tests. Compile daily reports outlining inspections and reporting deficiencies (if any). Read and understand specific project plans and specifications. Communicate with project team regarding project requirements and inspection results. Requirements: AWS CWI Certification Level I or Level II UT (Shear wave). Level I or Level II MT. ICC Structural Steel & Bolting. Minimum 5 years of experience. High School Diploma or equivalent. General computer knowledge (Excel, Word, PDF). Able to travel to various locations. Benefits include company paid holidays, sick days, 2 weeks paid vacation, 100% health insurance premium, matching 401k plan. Salary is negotiable according to experience. We have a great culture defined as: Detail-oriented -- quality and precision-focused. Innovative -- innovative and risk-taking. Outcome-oriented -- results-focused with strong performance culture.

D'Leon Consulting Engineers is seeking a Construction Inspector in Los Angeles, CA Work Hours: 6:00AM- 2:30PM Responsibilities Perform inspection of major reinforced concrete structures including pile foundations, roadways, and bridges across multiple jurisdictions. Conduct inspections for the installation of sanitary sewer systems and storm drains, including related structures, in accordance with City and County of Los Angeles Standards. Perform inspections for the installation of street lighting and traffic signal systems, following the specifications set by the City of Los Angeles Bureau of Street Lighting and the Los Angeles Department of Transportation. Apply extensive knowledge of City of Los Angeles Standard Plans/Specifications and the Standard Specifications for Public Works Construction (Greenbook). Apply extensive knowledge of Cal-Trans construction Standard Plans and Specifications. Ensure compliance with multi-phased, site-specific traffic control plans, with a strong emphasis on pedestrian safety and routing. Apply knowledge of and enforce Cal-OSHA, Contractor's and safety requirements. Prepare comprehensive daily inspection reports that clearly and concisely documents observed construction activities and identifies issues, deficiencies, and safety concerns in a timely manner. Assist in reviewing and approving Contractor's monthly progress payment request based on work completed and approved schedule of values. Collaborate professionally within a large team of Inspectors. Qualifications High school diploma (or equivalent). Current Cal-Trans test method certifications in 100, 200, 300, and 500 series desired. Current City of Los Angeles Deputy Inspector Licenses; Grading, Concrete, Post Tension desired. 30-hour Cal-OSHA training prior to assignment. The 30-hour training will have been received within the last 4 years. Computer Proficiency - Utilize electronic equipment to review project plans and contract documents including RFIs, submittals, and change orders. Working and operational knowledge of Project Management Information Systems (PMIS) used for inspection reporting and document control. Microsoft Office, Microsoft Outlook, Adobe Pro, PM Web, Bluebeam, ProCore, etc.. D'Leon Consulting Engineers is an equal opportunity employer committed to fostering an inclusive and respectful workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role Description: Arcadis is seeking a Rail Inspector to join our team supporting major rail and transit projects throughout the Los Angeles area. In this role, you will be responsible for conducting on-site inspections at various stages of rail construction projects from initial groundwork through final completion to ensure compliance with project specifications, safety standards, and regulatory requirements. Role Accountabilities: Interpret plans, specifications, and codes and verifies contract work is performed in accordance with them. Prepare Non-Conformance Reports when work is not performed to the approved standards. Maintains daily activity logs and reports. Monitor contractor-testing activities. Determine construction conforms to plans and specifications, if not issue Non-Conformance Reports for corrective action. Assist in maintaining, supporting, and promoting a safe work environment while complying with Union Pacific and BNSF Railway safety rules, policies, and procedures. Coordinates preparation of inspection cost estimates and maintenance records. Arranges, coordinates and oversees technical inspections such as electrical, mechanical, landscaping, soil testing, concrete and asphalt mixes, and reinforcing steel for conformance to specification requirements. Coordinates Metro Test laboratory activities and compares verifications test results with results from Contractor's laboratory. May allocate inspection resources and supervise inspectors. Required Qualifications: A minimum of five (5) years of journey-level experience inspecting, constructing and performing installation, repair and maintenance of rail, track work (ballasted and direct fixation) and related facilities. Experience with rail transit agencies ICC Certificate of Reinforced Concrete or Masonry, ACI Registered Construction Inspector License, comparable Deputy Inspection License for a county or city agency, NICET certification, or other alternative certification from an acceptable nationally recognized organization is highly desirable where applicable to inspection of that particular trade. Key Skills and Abilities: Familiarity with rail start-up, testing, and commissioning protocols OSHA 30 training certification. Certificates in this classification that exceed this requirement will be accepted. BNSF Railway Safety Training preferred. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 20 days PTO that accrue per year. The salary range for this position is $150,000 - $175,000. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. Join Arcadis. Create a Legacy. #LI-BB1#LI-ONSITE #Mobility-US-Jobs #Construction #ON-Call

Job Description Job Title: Quality Control Inspector II F Reports To: Quality & Process Planning Manager Job Purpose The Quality Control Inspector II is responsible for ensuring that all products meet established quality standards and customer specifications. This role performs inspections, checks, and tests during the manufacturing process, records observations, and recommends improvements. The position requires proficiency with ERP systems to produce quality reports for internal and external use, while supporting company-wide quality initiatives and continuous improvement efforts. Duties & Responsibilities Ensure compliance with all quality check procedures throughout the production process. Perform required physical testing in accordance with Work Instructions. Develop inspection plans aligned with company and customer-specific requirements. Conduct required visual checks and verify masking accuracy against blueprints and purchase orders. Act as subject matter expert for multi-process orders. Approve internal masking with resource owners to prevent process failures. Record inspection data, document pass/fail status, and report rejections with photo evidence as needed. Tag and hold parts for review when disposition is required. Complete logbooks for Copper Sulfate and 24-hour humidity tests. Review Shop Travelers for accuracy, completion, and compliance. Verify packaging instructions are followed before shipment and ensure traceability. Inspect expedited, regular, and rework orders for proper processing. Perform random sampling inspections on large quantity orders. Gather required measurement tools and take photos, sharing findings with customers and production teams. Promote accuracy in job scanning and identify opportunities to improve shop floor efficiency. Utilize ERP software to document corrective actions and prevent recurring quality issues. Educate production staff on quality control issues and support improvement efforts. Assist Quality Engineering and Specialists with troubleshooting and corrective actions. Maintain communication via email and phone as required. Ensure inspection benches are organized and clean; maintain 5S standards and audits. Perform other duties as assigned by management. Qualifications 3-5 years of quality control inspection or related experience. High School Diploma or equivalent required. Basic blueprint reading and interpretation. Proficiency with Microsoft Office Suite and ERP systems. Strong verbal, written, and customer service skills. Experience using measuring tools (meters, gauges, calipers, etc.). Ability to work full-time, including overtime and weekends as needed. Key Competencies Strong verbal and written communication skills. Attention to detail and accuracy. Basic math and analytical skills. Documentation and reporting skills. Hand-eye coordination. Ability to stay organized and maintain good housekeeping practices.

Inspector Pay: $21.50 - $40.50 per hour 🎥 See our inspection team and workspace in action: Watch our video About the Job We're looking for a skilled and experienced Inspector to join our Quality team. This role is hands-on and focused on dimensional inspections, first articles, and ensuring every part meets aerospace-level standards. You'll work with both manual tools and advanced inspection equipment like CMMs and optical comparators. What You'll Do Perform dimensional inspections on machined and assembled products Use calipers, blade and depth micrometers, bore gages, optical comparators, and CMMs Read blueprints, engineering drawings, and planning documents Perform First Article Inspections (FAI) and create reports per AS9102 Conduct receiving, in-process, and final inspections Inspect threads, bores, surface finishes, and overall part quality Document results, discrepancies, and communicate issues clearly Work with Production, Quality, and Engineering teams Support quality improvement and R&D activities Use software tools including 1Factory and MAP What You Bring 1+ years of hands-on inspection experience (aerospace strongly preferred) Advanced understanding of GD&T and blueprint reading Comfortable operating manual and DCC CMMs (Preferred) Familiarity with common inspection equipment and gage usage Strong attention to detail and ability to work independently High school diploma or GED required; technical training or equivalent experience (preferred) Physical Requirements Able to stand, walk, reach, kneel, and crouch as needed Lift and move up to 50 lbs regularly Visual acuity for close inspection tasks Why Work With Us Health Coverage: 100% paid medical, dental, and vision for employees 401K + Profit Sharing Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years 7 Paid Holidays Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts Career Growth: On-the-job training, cross-training, and up to $1,000/year for continuing education 📍 Apply today and bring your quality skills to a company that values precision, improvement, and teamwork. Learn more about our benefits 6:30 AM - 3:00 PM, Monday to Friday (with overtime opportunities)

ABOUT SANISURE SaniSure is a multinational manufacturer of single-use bioprocessing solutions (SUT) used in the production of biological drugs, including monoclonal antibodies, cell therapies, gene therapies, and vaccines. With operations in the U.S. and in Europe, SaniSure operates a leading platform of vertically integrated critical fluid management technologies and integrated solutions. Its single-use products and system solutions are sold to global pharma and biotech companies and are used from R&D through full-scale commercial cGMP manufacturing of among the most innovative large molecule therapeutics and vaccines. This role is expected to be on-site. We continue to be on a robust growth trajectory, via both organic and inorganic growth, as the company capitalizes on increasing global demand and continues its transition from a component manufacturer to an integrated systems and solutions provider. Our primary offering includes high-value assembly solutions and a portfolio of market-leading products, including PharmaTainer bottles and carboys and related assemblies, Mixed4Sure mixing solutions, Flex4Sure bags and bag assemblies, Fill4Sure needles and needle assemblies, fittings, clamps and a wide range of silicone, braided and thermoplastic tubing solutions. The company has a growing portfolio of innovative solutions serving fast-growth applications, such as cell and gene therapies. SaniSure is a high-growth, nimble and innovative company with a strong customer and market focus. Join us and grow your career at SaniSure! SUMMARY : Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Shift 7:00 to 3:30 pm. ESSENTIAL FUNCITONS: Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; Initiate nonconformance reports (NCR). Performs all aspects of testing related to manufacturing. Incoming inspections In-process inspection. Final Inspection release of finished goods. Document review. Supports cross functional departments investigate potential non-conformance's observed Ensures that all inspections and procedures are properly completed and documented. Perform pre and post-inspection of product gamma irradiation process. Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations Prepare and submit Metrics reports to the quality supervisor or QC lead Comply with all safety requirements ensuring work areas meet standards. May be required to report to multiple facilities within a 2-mile radius. Job Order document review and release Other duties as assigned QUALIFICATIONS High School Diploma or equivalent with 2+ years of experience in quality control inspections. Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. Minimum of 0-2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Solid organizational and planning skills required. Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. Must be able to work effectively and efficiently in a team environment. Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. Must display personal accountability for results and integrity. Must display eagerness to learn and continuously improve. Must have uncompromising dedication to quality. Good general mathematical skills. General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges Equal Opportunity Employer We are committed to providing equal employment opportunities to all employees and applicants without regard to race, ethnicity, religion, color, sex (including childbirth, breast feeding and related medical conditions), gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship status, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state and local laws.

JOB TITLE: Quality Inspector JOB TYPE: 6 month Contract-to-Direct Hire/Fulltime ESSENTIAL FUNCTIONS: Able to perform all duties of a General Inspector Must be capable of making own set-ups for inspection, including setups for checking Form Tolerances, Orientation Tolerances, Runout Tolerances, Profile Tolerances, Location Tolerances Must have an excellent understanding of ASME Y14.5 All symbols, modifiers, Tolerance Zones, Feature Control/Datum Reference Frames, General Rules, Free state Variation, Fundamental Rules, Basic Dimensions, Datums and Datum Selection, Datum Symbol Placement, Virtual Condition, Datum Targets, Position Tolerance Calculation, Projected Tolerance Zones, Chain Line and Chain Dimensions Knowledge of Repair Station Instructions according to a Component Maintenance Manual. Knowledge of FAA conformity Inspection Knowledge of Coordinate Measuring Machine Programming and Operation of the machine Analyze facts and circumstances surrounding individual inspection problems and determine acceptance or rejection of parts within requirements. Performs inspection and records results to assist other departments in their research and analysis work. Review certification packages delivered with parts from suppliers for accuracy and adequacy. All other duties as assigned PRIMARY TOOLS OR EQUIPMENT: Computers, printers, calculator and inspection equipment. Qualifications Education and/or Experience: BS Degree and/or 10 years of experience in an aerospace manufacturing environment. Class-A Inspector and CMM experience Language Skills: Ability to read and comprehend instructions, correspondence and memos. Good verbal skills with ability to effectively present information to customers, managers and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability calculate figures and amounts such as percentages and to draw and interpret bar graphs. Use general shop mathematics including trigonometry. Other Teamwork or Skills and Abilities: Ability to participate as a team member, daily or in meetings. Ability to listen actively and respond in group discussions. Willingness to learn other job skills and assist other team members. Understanding of team and business goals. Reassess work based on team goals and team priorities. Physical Requirements: While performing the duties of this job, the employee is frequently required to sit; stand; walk, use hands to finger, handle or feel objects, and reach with hands and arms. The employee is occasionally required to stoop, kneel, or crouch. The employee must frequently lift and/or move up to 10 pounds and occasionally lift up to 20 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus from close items to items at a distance. Additional Information All your information will be kept confidential according to EEO guidelines.

The NDT Advanced Services API Inspector is responsible for performing inspections in accordance with API standards designated equipment for purposes of recommending and approving repairs or certifying compliance. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values and Seven Critical Choices. * Performs internal and external inspections on equipment at scheduled intervals to maintain the mechanical integrity of fixed equipment. * Recommends and approves repairs as well as performs visual inspection of completed repair work. * Assists in scheduling activities related to inspection. * Writes detailed inspection and turnaround reports, and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate and deal with customers and other parties in such a manner as to benefit the professional reputation of the company. This communication is in person at the plant / job site. * Complete all required training, including tests, within Company guidelines. * Perform necessary filing of customer and company job related forms and paperwork. Job Qualifications * High school diploma or equivalent preferred. * Technical school or other related training preferred. * Previous industry related experience preferred. * Must possess valid API certification. * Must possess valid Driver's License. * Travel requirement: 0% - 50%. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis. * Candidate must be capable of climbing, working at high elevations and working in confined spaces. Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively. * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills.

Civil Inspector at Zephyr Rail Zephyr Rail, a celebrated name in the railroad design and construction management industry, seeks a seasoned Civil Inspector to join our innovative team. Recently ranked among the best engineering firms to work for by the Zweig Group three years in a row! We're known for our groundbreaking use of technology in civil engineering projects, and we offer a dynamic workplace environment geared towards professional growth and innovation. Responsibilities: Responsible for performing quality control inspection and documentation in accordance with approved written procedures Monitors, witnesses, documents, and reviews documents of materials, components, and systems testing both on site and off site Participates in the contractor's material receiving activities by surveillance, documentation review and sign-off, as appropriate Documents the inspections of contract work to verify that it is in conformance with the Contract Documents Develops, or reviews and signs off on required inspection checklists and test results Participates in the inspection of specially furnished equipment and construction materials Observes and inspects field sampling and testing of materials by other entities Documents non-conforming conditions, verifies Contractor's activities and results of efforts to assure correction and prevention of recurrence Performs other tasks as directed by the Resident Engineer Qualifications: High School Diploma or equivalent 10 years of experience in heavy construction - track/rail experience Tunnel / Bridge experience a plus ICC and ACI Required We are unable to provide Sponsorship at this time Ability to commute/relocate: Los Angeles, CA: Reliably commute or planning to relocate before starting work Required Schedule: 8 hour-shift - In-person Monday to Friday Weekends as needed Salary Range: $104,000 - $187,200 Benefits: Employer-paid Medical, Dental, Vision insurance PTO, Paid Holidays, 401K Zephyr Rail is an equal opportunity employer We look forward to hearing from you! Explore more about us at *************** *No outside Agencies or Recruiters, please! Note to Recruiters and Job Placement Agencies: We do not accept unsolicited resumes or candidate profiles from recruiters or agencies. Any unsolicited resumes received will be considered our property and will be processed accordingly. Only direct applicants will be considered. #LI-SB1

Quality Control Inspector - Wire and cable harnesses Full-time, in-person On-the-job training Must be able to perform detail-oriented tasks, including inspection and testing. With supervision, perform basic and routine assembly operations on components, and sub-assemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions. Core Functions: Advanced Soldering Crimping techniques Connector assembly Understanding of Travels and Drawings Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc. Use of rulers and tape measure. Knowledge and experience: Cable/Harness Assembly in Aerospace and Military Applications Ability to Read & Interpret Blueprints, Schematics, Traveler/Routers, Bills of Material & Wire Lists. Basic math and measurements. Fluent English The following is preferred but not required: Experience interpreting design drawings Experience with wire and cable harnesses Familiarity with standard specifications such as IPC/WHMA-A-620, IPC J-STD-001, and NASA-STD-8739.4 Certification to the standards IPC/WHMA-A-620, IPC J-STD-001, and NASA-STD-8739.4 is a big plus. Schedule: M-F 6:00 am-2:30pm.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

THE COMPANY Silvus Technologies is dedicated to one mission: connecting those who keep us safe. We do so by delivering the most advanced Mobile Ad-hoc Network (MANET) radios powered by our custom and ever-evolving Mobile-Networked MIMO waveform. Together, our radios and waveform provide the vital communications for mission critical applications in the harshest environments from underground tunnels to high altitude balloons. Silvus StreamCaster radios are being rapidly adopted by customers all over the world ranging from the U.S Departments of Defense, to International, Federal, State and Local Law Enforcement agencies, all the way to the Super Bowl, Grammys and industry-leading drone, robot, and other unmanned systems manufacturers. Wouldn't you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of “ Keeping Our Heroes Connected ”? Silvus' rapid growth is fueled by a focus on research and innovation and a team of the most passionate, skilled, and creative thinking individuals. If you are looking for a challenging experience, you owe it to yourself to learn how Silvus can provide a rewarding opportunity that creates a pathway to a fulfilling career. THE OPPORTUNITY Silvus is seeking a Quality Control Inspector who will report to the Quality Control Inspection Supervisor on the OQC team. Primary responsibilities will include conducting thorough inspections, maintaining accurate documentation, and ensuring proper procedures are followed for incoming electronic and mechanical parts and during the manufacturing and testing process. This role is also responsible for investigating any quality issues, anomalies, or failures and will work alongside engineering and suppliers to recommend any necessary changes or improvements. This position is fully onsite, Monday through Friday, at Silvus Technologies' HQ in the heart of vibrant West Los Angeles. The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion. ROLE AND RESPONSIBILITIES Perform and document inspections of products and processes, including electronic cables, GPS devices, Wi-Fi dongles, connectors, mechanical enclosures, shields, and other critical components. Conduct inspections tied to receiving raw materials, parts, components, and fit checks as necessary. Ability to inspect First Article components and subassemblies. Prepare in-process inspection reports, ensuring completeness and accuracy. Maintain Quality documentation. Identify the serviceability of parts and components and appropriate tooling. REQUIRED QUALIFICATIONS High School Diploma or GED required. Minimum 1-3 years of electronic part inspection experience. Proficient experience utilizing inspection tools (i.e., multi-meters, calipers, micrometers, microscopes). Demonstrated proficiency in reading basic schematics, specifically those related to PCBs and PWAs. Read and interpret part documentation, including blueprints, drawings, schematics, etc. Utilize Google Suite, Microsoft Office, and various communication systems effectively. Identify and escalate potential issues. Maintain clear and accurate records and documentation. Must have excellent organizational skills, possess high attention to details, with the capacity to handle numerous tasks simultaneously. Excellent and effective oral and written communication. Must be a U.S. Citizen due to clients under U.S. government contracts. All employment is contingent upon the successful clearance of a background check. PREFERRED KNOWLEDGE SKILLS AND ABILITIES IPC-J-STD 610, 620, or 001. Ability to recognize the importance of processes and procedures and follow them accordingly. Ability to remain flexible and responsive in a fast-paced environment with shifting demands. Effectively evaluate workload and manage competing priorities and deadlines. Proactively recognize challenges or risks and communicate them to the appropriate stakeholders to ensure timely resolution. WORKING CONDITIONS & PHYSICAL REQUIREMENTS Occasional exposure to heat and cold. While performing the duties of this job, the employee is required to do the following: Perform bending and reaching movements to place items on lower and higher shelves. Kneeling or squatting to access lower shelves. Must be able to lift up to 50 lbs. when receiving incoming part shipments. Walking/Moving in the labs. COMPENSATION The pay range is NOT a guarantee. It is based on market research and peer data, and will vary depending on the candidate's experience and qualifications. CA Pay Range$22-$27 USD NOTE - As a U.S. Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements are needed for some Engineering or R&D roles. This generally does NOT apply to International positions; only job postings for positions located in the U.S. Exceptions will be included in the Required Qualifications section of the posted position. All Employment is contingent upon the successful clearance of a background check. Silvus is proud to be an equal-opportunity employer, and we value diversity. We do not discriminate on the basis of race, color, age, religion or belief, ancestry, national origin, sex (including pregnancy), sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, physical or mental disability, protected veteran status, genetic information, political affiliation, or any other factor protected by applicable federal, state, or local laws. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request accommodation. *Silvus does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to Silvus Technologies.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

Job Description Preferred Experience: Experience at the journey-level as an electrician, with a focus on the installation and repair of electrical systems in public works, institutional, commercial, or industrial settings. Experience overseeing and ensuring compliance with building codes and regulations on significant construction projects. Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers. Expertise in identifying and addressing deficiencies, ensuring that all aspects of construction meet the required standards. Must be open to learning the prescriptive items required by the agency A strong understanding of diverse code requirements. Excellent communication and time management skills. Minimum Requirements and Certifications: Electrical/IT inspection staff shall have at 3 years or more of experience performing electrical/IT inspections; For task on the Airfield, 3 years or more of experience with airfield lighting is required. Current ICC Certification as a Commercial Electrical Inspector Proof of NFPE-70E standards. Completion of training must have been achieved within the last 3 years 30-hour Cal-OSHA training prior to assignment. The 30-hour training will have been received within the last 4 years. Fall protection and harness training. The ability to perform inspections for: Underground utilities and duct banks High-voltage switchgear and electrical panels Conduit racks, conductors, and grounding systems Interior and exterior lighting systems Fire life safety systems including smoke/heat detectors and FM-200 suppression systems Electrical shutdowns, lockout/tagout procedures, and breaker coordination Low-voltage systems (voice/data, security, access control) Door card readers, security cameras, and public address (P.A.) systems Communication cabling and equipment rooms. Hardware /Software Experience and Proficiency Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Office, Outlook, Excel, Word, PM Web, Adobe Pro, Bluebeam, etc.). Computer proficiency to review and utilize electronic equipment for contract documents efficiently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision. Job Posted by ApplicantPro

Job DescriptionBenefits: LTD/STD/Vision 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance CLMI Group is looking for passionate construction professionals to join our team! While we may not have a current opening, we invite you to join our talent community and be considered for future opportunities that align with your expertise. We value ambition, dedication, and innovation, and believe in building a network of talented individuals who share our commitment to making a difference. Position Title: Inspector, Electrical / IT - Talent Community Location: Los Angeles, California (Candidates must be able and willing to commute to Los Angeles, CA) Due Date: Continuous Position Description Summary The Electrical / IT Inspector will support CLMI clients Quality Assurance & Construction Inspection Division across multiple projects within CLMI clients Capital Improvement Program. Candidates must possess a current ICC certication as Commercial Electrical Inspector to apply. Successfully hired Candidates must provide Proof of NFPA 70E standards training within the last 3 years and Proof of Cal-OSHA 30 hr. training within the last 4 years, prior to assignment Successfully hired candidates must have client badge prior to ocial start. Must be able to work any assigned shift - day, swing, or night - as required to meet the Contractors construction schedule. Professional Experience Level/Minimum Qualications Electrical/IT inspection sta shall have 3 years or more experience performing electrical/IT inspections for Building Construction. Current ICC Certication as a Commercial Electrical Inspector Proof of NFPA 70E standards training within the last 3 years Proof of Cal-OSHA 30 hr. training within the last 4 years Training & knowledge of NFPA -70, 70E, & 72. Fall protection and harness training. Preferred Qualications and Experience Experience at the journey-level as an electrician, with a focus on the installation and repair of electrical systems in public works, institutional, commercial, or industrial settings. Experience overseeing and ensuring compliance with building codes and regulations on signicant construction projects. Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers, and city ocials. Expertise in identifying and addressing deciencies, ensuring that all aspects of construction meet the required standards. Must be open to learning the prescriptive items required by the agency. A strong understanding of diverse code requirements. Excellent communication and time management skills. Essential Job Duties Conduct comprehensive daily inspections of electrical and IT systems across building and terminal construction projects, ensuring compliance with applicable codes and project specications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders. Demonstrates strong prociency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deciencies, or safety concerns in a timely manner. Verify contractor compliance with local and national electrical codes (e.g., NEC, NFPA 70, 70E, 72) and client-specic standards. Track and document time-and-material work, eld changes, and job quantities Assist in validating contractor progress payment requests based on an approved schedule of values. Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed. Perform inspections of electrical installations including, but not limited to: Underground utilities and duct banks High-voltage switchgear and electrical panels Conduit racks, conductors, and grounding systems Interior and exterior lighting systems Fire life safety systems including smoke/heat detectors and FM-200 suppression systems Electrical shutdowns, lockout/tagout procedures, and breaker coordination Inspect IT infrastructure installations such as: Low-voltage systems (voice/data, security, access control) Door card readers, security cameras, and public address (P.A.) systems Communication cabling and equipment rooms Hardware/Software Knowledge Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Oce, Outlook, Xcel, Word, PM Web, Adobe Pro, Bluebeam, etc.). Computer prociency to review and utilize electronic equipment for contract documents eciently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision. Education/Training High school diploma (or equivalent) For task on the Aireld, 3 years or more of experience with aireld lighting is required. Element-Specic Requirements/Notes May assume other duties as required/needed. May be required to work various shifts, including day, swing, and night. Shall be open to work modified schedules, including nights and weekends, as dictated by the contractors' work activities and accelerated project schedules. Availability to work overtime as required to meet project deadlines and ensure timely completion of tasks is preferred. Offered rate of compensation will be based on a variety of non-discriminatory factors, including education, qualifications, experience, and geographic location. The salary range for this position is $125,000 - $135,000.

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards , as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics . Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.

Meet the Owned Brand division of REVOLVE: REVOLVE is the next-generation fashion retailer for millennial and Generation Z consumers. As a trusted, premium lifestyle brand and a go-to source for discovery and inspiration, REVOLVE delivers an engaging customer experience from a vast yet curated offering of over 45,000 products. Founded in Los Angeles in 2003 by co-CEOs, Michael Mente and Mike Karanikolas, REVOLVE's family of brands includes their luxury offering, FORWARD by Elyse Walker, and a portfolio of 24 owned brands such as Lovers + Friends, Tularosa, NBD and RAYE. The Owned Brand division within REVOLVE is an industry-leading fashion design and production house based in Los Angeles. Leveraging the power of REVOLVE's data driven merchandising, combined with raw creative talent results in an unparalleled ability to identify a specific market niches, developing brands that each have their own identity, designed with a distinct consumer interest and personality in mind. At REVOLVE the most successful team members have the thirst and creativity to redefine fashion retail for the 21st century, making REVOLVE THE leading online retail destination targeted towards Millennial and Generation Z consumers seeking premium fashion. With a team of 1,000 strong, we are a dynamic bunch that are motivated by getting the company to the next level. It's our goal to hire high-energy, diverse, bright, creative, and flexible individuals who thrive in a fast-paced work environment. In return, we promise to keep REVOLVE a company where inspired people will always thrive. Some of the sweetest perks we offer aren't in a typical benefit package like hefty discount on items we carry - as in 50% or more off retail prices, free weekly lunches, and pretty rad company parties. To take a behind the scenes look at the REVOLVE “corporate” lifestyle check out our Instagram @REVOLVEcareers or #lifeatrevolve. Are you ready to set the standard for Premium apparel? Main purpose of the Owned Brands QC Inspector role: This is a full time role for a candidate who can identify the most effective defect recovery process for each item to minimize monetary loss of defective merchandise. He or she will be heavily involved in the QC process through the speccing of garments, evaluation of garments, and providing insight on different garment issues. This is a permanent full time role for a candidate who is able to work in a fast paced, high volume, sku intensive environment while maintaining accuracy. Major Responsibilities: Essential Duties and Responsibilities include the following. Other duties may be assigned. • Accurately spec garments • Document defects into current systems • Comprehend and analyze reports to identify areas of opportunities • Effectively communicate issues to all involved parties • Communicate and interact with all cross functional departments, for pulling, mending, Returns, and any other follow ups as needed • Update QC Tracker, and other relating reports on daily basis • Minimize monetary loss of defective merchandise through defective recovery process • Identify the most effective defect recovery process for each item - RA, Restore, Sellable Defect, Other • Identify defects by inspecting defective apparel • Clearly communicate with Technical Design Team regarding defective and unacceptable merchandise • Travel as needed to the Cerritos location • Complete ad-hoc tasks and assignments as directed by management Required Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Ability to spec garments • High level of attention to detail and the ability to identify apparel construction flaws • Hands-on approach at recommending “how-to-fix” solutions quickly and efficiently • High level of apparel construction and fabrication knowledge • Strong communication, prioritizing and organizational skills • Ability to take ownership of assigned tasks and meet responsibilities without supervision • Ability to work successfully with any personality type and be a team player • Sense of urgency and ability to maintain performance quality under pressure • Flexible and adaptable to a very fast-paced environment • Must be able and willing to lift and carry up to 10 lbs., perform frequent repetitive finger, hand and wrist motions, as well as, bending, stooping, reaching, squatting, kneeling, pushing, and pulling • Must be able to sit for extended periods of time Minimum Qualifications: • Minimum 5-7 years' experience working in a QA/QC, Production or Warehouse environment required • Computer literate in Excel, Word and Email required • Technical fashion, garment construction and fabrication knowledge preferred Preferred Qualifications: • Bilingual highly preferred; proficient in English A reasonable estimate of the current base hourly/salary range is $18/hr to $19/hr. ATTENTION: After submitting your application, please check your spam folder for emails on your application status. Emails are sent from an ADP email address.