Inspector jobs in Palm Bay, FL

Working Title: INSPECTOR II - 55007588 Pay Plan: Career Service 55007588 Salary: $42,817.95 - $55,411.46 Total Compensation Estimator Tool STATE OF FLORIDA DEPARTMENT OF TRANSPORTATION JOB POSTING DESCRIPTION 490 / Treasure Coast Operations PENDING CLASSIFICATION UPDATE / OPEN COMPETITIVE /ANTICIPATED VACANCY CAREER SERVICE FULL-TIME CONTACT PERSON: Anna Dienno CONTACT EMAIL ADDRESS: *************************** HIRING SALARY RANGE: $1,646.84 - $2,131.21 /biweekly range / $42,817.95 - $55,411.46 /annual range Join FDOT and be part of the team that works as one to improve safety, enhance mobility and inspire innovation in the Florida transportation system. Our Mission The mission of the Florida Department of Transportation is to provide a safe statewide transportation system that promotes the efficient movement of people and goods, supports the state's economic competitiveness, prioritizes Florida's environment and natural resources, and preserves the quality of life and connectedness of the state's communities. Our Vision As a OneFDOT team, we serve the people of Florida by providing a transportation network that is well planned, supports economic growth, and has the goal of being congestion and fatality free. The Work You Will Do INSPECTOR II/DISTRICT FOUR/DIRECTOR OF OPERATIONS/DISTRICT MAINTENANCE/FORT PIERCE MAINTENANCE-ADMINISTRATION This position will review, observe, and inspect work activities on active FDOT construction projects to ensure compliance with FDOT Standard Plans and Standard Specifications. This position will be required to photo document and report all issues and concerns associated with active FDOT construction projects. The Difference You Will Make: Through cooperation, coordination and collaboration among the OneFDOT team, you will be contributing to a strong and empowering culture of TRREC: Trust, Relationships, Respect, Empowerment, and Communication. How You Will Grow: FDOT encourages our team members to grow through engagement, empowerment, training, and professional development. Through our agency's learning management system, you have access to hundreds of computer-based training and instructor-led courses. Where You Will Work: DISTRICT 4 - TREASURE COAST OPERATIONS 3601 OLEANDER AVENUE FT. PIERCE, FL 34982 Annual Salary Range: $42,817.95 - $55,411.46 Your Specific Responsibilities: Perform independent complex technical assignments to accomplish inspection and monitoring of work activities performed within the state Right of Way. Verifies that work is performed according to all State and Federal specifications, plans, permits, policies, procedures, statutes and rules. Performs approved testing techniques through the use of hand tools, gauges and/or instruments to ensure materials used conform to Florida Department of Transportation (FDOT) requirements. Perform interpretation of governing documents related to authorized Maintenance of Traffic device usage, installation/placement and materials to ensure safe work zones. Reviews work site activities for conformity to safety regulations and takes corrective measures when deficiencies are noted. Attends pre-work conferences on contracts and attends meetings with contractors/utility owners/permitees throughout life of projects as assigned. Acts as a representative of the Department on all issues related to contracts. Prepares records and reports for work completed and other related documents accurately and in a timely manner. The Successful Candidate will have the following required Knowledge, Skills, and Abilities: Knowledge of: * to enter and retrieve information from a computer database * to perform field inspections of worksites for compliance to Florida Department of Transportation (FDOT) roadway standards Skills in: * communicating technical information verbally and in writing * understanding and interpreting plans, specifications, design standards and manuals * dealing with internal and external customers in a courteous manner * personal computer (PC) and understanding of databases * organizing records and handling multiple tasks and interruptions Ability to: * remain calm and effective under pressure * work effectively as a team member * follow oral and written instructions * use word processor software * lift 50 pounds and stoop, climb, squat, push, crawl and bend. Other Job-Related Requirements: * This position requires the incumbent to complete the following self study courses within 11 months of appointment: Construction Math and Plans Reading. * Must also obtain the Intermediate Temporary Traffic Control (Maintenance of Traffic) certification and the Qualified Stormwater Management Inspector certification (Florida Department of Environmental Protection through the Stormwater, Erosion and Sediment Control Inspector Training Program) within one year and maintain it. * While on-duty status, may be required to drive a state owned or leased vehicle to perform the duties of this position. * Valid Class E Driver License is required. * May be required to work with or around: hazardous materials, work nights and weekends and be available for emergency response work as necessary. Minimum Qualifications: * High School Diploma or Certificate of High School Equivalency and Class "E" Driver's License. This position requires a valid Class E driver license with an acceptable driving record in accordance with the Department's Driver's Record Requirements Policy. An unacceptable driving record is defined as any of the following: * three (3) or more moving violations in the past three (3) years that accumulate three (3) or more points per violation; * any two (2) convictions of reckless driving in the past three (3) years; * a suspension or revocation of the driver license for moving violations in the past three (3) years; and * a suspension or revocation for refusal to take a sobriety test, or any suspension or revocation for a DUI conviction, in the past four (4) years. Your driving record will be reviewed and the status of your driver license confirmed. The State's total compensation package for employees features a highly competitive set of employee benefits including: * Health insurance (over 90% employer paid) * $25,000 life insurance policy (100% employer paid) * Dental, vision and supplemental insurances * State of Florida retirement package * 10 paid holidays a year * Generous vacation and sick leave * Career advancement opportunities * Tuition waiver for public college courses * A variety of training opportunities * Employee Assistance Program (EAP) For additional benefit information available to State of Florida employees, visit: ************************************* SPECIAL REQUIREMENTS: You will be required to provide your Social Security Number to conduct required verifications. Male applicants born on or after October 1, 1962, will not be eligible for hire or promotion in the Career Service, or appointment in the Selected Exempt Service (SES) or Senior Management Service (SMS), unless they are registered with the Selective Service System (SSS) before their 26th birthday, or have a Letter of Registration Exemption from the SSS. THE FLORIDA DEPARTMENT OF TRANSPORTATION VALUES THE SERVICE VETERANS AND THEIR FAMILY MEMBERS HAVE GIVEN TO OUR COUNTRY AND SUPPORTS THE HIRING OF RETURNING SERVICE MEMBERS AND MILITARY SPOUSES. If you are a preference-eligible applicant who receives notice of a hiring decision and believe that you were not afforded employment preference in accordance with applicable Florida law and regulation, you may file a written complaint within 60 calendar days from the date you receive the notice, requesting an investigation to the Florida Department of Veterans' Affairs, Division of Benefits and Assistance, 9500 Bay Pines Boulevard, Room 214, St. Petersburg, Florida 33708. THE FLORIDA DEPARTMENT OF TRANSPORTATION VALUES AND SUPPORTS EMPLOYMENT OF INDIVIDUALS WITH DISABILITIES. QUALIFIED INDIVIDUALS WITH DISABILITIES ARE ENCOURAGED TO APPLY. In accordance with Section 110.112, Florida Statutes, and the Florida Department of Transportation's Individuals with Disabilities Affirmative Action Plan, the agency is committed to ensuring affirmative action and equal employment opportunity for qualified individuals with disabilities. Upon request and as appropriate, reasonable accommodations to individuals with disabilities may be provided. Please contact the Florida Department of Transportation's Human Resources Office at ************** for assistance. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. **The pay rate for this role in Florida is $33.40 per hour.** **Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************** **Responsibilities :** + Perform NDT (Non Destructive Testing) inspection of welds, ride structure, and ride vehicles + Execute overhead rigging safety inspections + Complete various mechanical inspections + Perform rope access inspections + Cast members may be required to handle cleaning chemicals and supplies + Additional Personal Protective Equipment (face shields, goggles, refillable hand sanitizers, etc.) may be required **Basic Qualifications :** + Minimum of 3 years' experience performing weld inspections or equivalent visual inspections + Minimum of 2 years' experience documented as a Level II NDT Certified Inspector in magnetic particle and liquid penetrant inspection + Ability to read and work from blueprints, schematics, sketches, and verbal instruction + Familiar with non-destructive test techniques and basic mechanical measurement equipment + Ability to perform rope access work + Ability to lift up to 50 pounds + Excellent written and interpersonal communication skills + Proficiency in standard office software programs and mobile electronic devices **Preferred Qualifications:** + SPRAT Rope Access Certification + Familiarity with ultrasonic digital thickness measurement + Computer literate + Knowledge of AWS and ASME codes + Mechanical inspection experience or ASQ Mechanical Inspector Certification. + Certified Welding Inspector (CWI) **Additional Information :** **Schedule Availability:** Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year. Schedules and start times are subject to vary. **We proudly and enthusiastically encourage qualified individuals with experience in the U.S. Military to apply.** Keyword: WDW Casting WDW: Walt Disney World Casting Hourly Jobs **Job ID:** 1232675BR **Location:** Orlando,Florida **Job Posting Company:** "Walt Disney World Resort" The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

Skyborne Values In the ever-changing world of pilot training, standing still is not an option. Underpinning our pioneering spirit is an innate desire to continuously evolve. Our innovative approach challenges the norms of standard training, and as a result we deliver excellence to trainees and customer airlines alike. Be part of Skyborne, the world's leading airline academy. Lead change, bring your ideas, ingenuity, and determination and make a real difference, in return you will enjoy the most competitive salary package and benefits, career security and flexibility, set in beautiful and thriving parts of the world, in state-of-the-art facilities. We're not just an airline academy; we're a movement, and we want you to be part of it. Job Description Skyborne Opportunity We are looking for skilled and talented A&P Mechanics with Quality Assurance Inspection experience. We are an FAA Repair Station; we maintain fifty-four company owned Piper training aircraft. We currently have openings in our Quality Assurance Department for a Training Supervisor and Aircraft Inspectors. The Quality Assurance Inspector is responsible for inspection of completed aircraft work to ensure the work meets the quality standards of the company and Federal Regulations. Support and oversight of work in progress, OJT training and documentation of provided training. This includes inspection of structural, mechanical and electronic elements of the aircraft, measuring wear and assessing whether parts are airworthy. Inspectors report to the Quality Assurance Supervisor as well as the Chief Inspector for the following: Inspecting work performed by the technicians for quality of work; adherence to Repair Station Procedures; and compliance with applicable Federal Regulations. Ascertaining that all required entries on maintenance forms and work orders used by the Repair Station are properly executed by the responsible individuals and approving aircraft or components for return to service after maintenance. Assuring accurate information in the aircraft maintenance software while closing work orders. Inspectors will sign the authorization returning the aircraft to service. When not inspecting completed work, the Repair Station Inspector will provide support and training to the technicians to ensure the quality of work in progress. Inspection of structural, mechanical and electronic elements of the aircraft, measuring wear and assessing whether parts are airworthy. To ensure that no rejected, defective, unserviceable, or unairworthy parts are installed in any component or article released by the Repair Station and ensuring the proper identification of such parts as stated in the Repair Station Manual. Knowledge of pertinent Federal Aviation Regulations. Knowledge of manufacturer's, company, Repair Station manuals, and department policies. Understanding FAA Aviation Safety Action Program (ASAP) and Skyborne Safety Management Systems (SMS) Programs. Other Duties and Responsibilities: Participate in Repair Station Training meetings and activities including supporting and promoting the safety culture, reporting of all aviation safety related issues via the feedback system, and adhere to the related processes. Interacting with the Instructors and Trainees. Travelling aboard company aircraft or vehicles to locations away from Repair Station Facilities to support repair work away from station. Support Skyborne Airline Academy and its subsidiaries' commitment to ethical behavior by basing our priorities on lawful and ethical conduct as we deal with workers, Customers, vendors and others in all of operations. Other tasks may be assigned by the Center Director, Head of Aircraft Maintenance, Quality Assurance Manager, or Chief Inspector. Qualifications Professional requirements are as follows: Minimum experience 5 years as a Licensed A&P Technician. (IA is a plus) General Aviation experience with 100-hour, annual inspections, sheet metal repairs, troubleshooting systems and replacement of parts experience is preferred. Commercial or Corporate Part 145 FAA Repair Station or MRO Quality Assurance experience. High School Diploma or equivalent required. Outstanding communication and interpersonal skills, both written and verbal. Ability to concentrate and work in a fast-paced environment. Ability to maintain strong safety orientation under challenging circumstances. Must be legally eligible to work in the United States without restrictions. Contingent to employment, all candidates must pass a drug screening and background check. TSA background check and badging is also required for your role. Training will include: Repair Station Training and Inspector responsibilities. Maintenance administration software. (AcMP) Squawk crew procedure training. Assessment of trouble shooting and listening skills. Outstanding communication and interpersonal skills, both written and verbal. Ability to concentrate and work in a fast-paced environment. Ability to maintain strong customer orientation under challenging circumstances. Additional Information Benefits: Full Time Salary Range: $32-$37 hour (DOE) Health Insurance (medical, dental and vision) 401k Investment PTO - 18 days, plus 5-Sick Days Holidays - 9 days This is an opportunity not to be missed. If you want to take your career to heights you never thought possible, then we want to meet you.

Job Description The Quality Control Inspector is responsible for identifying, managing, and documenting events, discrepancies associated with either product or process as well as managing, writing any investigations that may be a result of those event, processing and investigating for customers, and consumer product complaints. DUTIES & RESPONSIBILITIES 1. Essential Duties: a. Perform incoming, set up, in-process and final inspection activities as specified by control plans using inspection tools such as micrometers, optical comparator, calipers. b. Perform audits and develop reports and tracking measurements as assigned by Production Planning Manager or Quality Assurance Manager. c. Complete inspection record as specified by product control plan and work instructions. d. As needed, perform open layout inspections, fulfilling product control plan and First Article requirements. 2. Supports all company programs and strictly adheres to company policies. 3. Performs other functions as assigned by supervisor from time to time. JOB SPECIFICATIONS B. Skills: Ability to multi-task and work with others in a fast-paced environment. Highly-developed problem-solving skills with a strong attention to detail. Customer-oriented and service-minded. C. Work Experience: Experienced in Manufacturing or Quality related field.

Pay Range: $30-35 Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts, rejects, or reworks defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Orlando, FL | Paid per Inspection About Us ARC Private Provider Services, part of Milrose Consultants, LLC, is Florida's go-to expert for fast, reliable building code compliance. We specialize in private plan review and inspection services that help developers, architects, and contractors accelerate timelines and avoid costly delays-without compromising quality. With concierge-level service and deep regulatory expertise, ARC ensures projects stay on track and clients remain confident from start to finish. Position Overview ARC Private Provider Services is seeking experienced, certified inspectors to join our growing team in Central Florida. In this role, you will inspect residential and commercial structures to ensure compliance with applicable codes and ordinances. This is a Statutory position, paid for by inspection, offering flexibility and competitive compensation. (Rate per inspection ~$75-100 commensurate with experience) Join ARC and be part of a team that's reshaping how inspections in Florida-faster, smarter, and with concierge-level service! Location: Orlando, FL and surrounding Orange County areas: Lake Osceola, Seminole, Kissimmee What You'll Do Conduct inspections for Building, Mechanical, Electrical, and Plumbing systems in residential and commercial structures. Ensure compliance with Florida Building Code, County and City ordinances, and applicable trade codes. Communicate clearly with clients and contractors to explain code requirements and inspection outcomes. Organize and manage daily inspection routes efficiently. Maintain accurate documentation and submit inspection reports. Update inspection results in permit databases and stay current on code changes through independent research. What You'll Bring Required : Active BIN# (Building Inspector Number) issued by the State of Florida. Certification and experience in at least one of the following trades: Building, Mechanical, Electrical, Plumbing OR Bachelor's or Master's degrees in Structural Engineering or MEP Engineering (Mechanical, Electrical, Plumbing) AND a minimum of 3 years of relevant experience Strong knowledge of applicable codes (Florida Building Code, NFPA-70, Plumbing/Mechanical Codes). Reliable transportation and ability to travel within the designated counties. Excellent communication and organizational skills. Ability to work independently and manage your own schedule. Preferred : Multi-trade certifications. Experience with private provider inspections. Familiarity with permit databases and digital reporting tools. ARC Private Provider Services, part of Milrose Consultants LLC, is an Equal Opportunity Employer . We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by law. Milrose Consultants LLC is committed to providing reasonable accommodation for qualified individuals with disabilities. If you need assistance or an accommodation due to a disability, please contact us at *******************. Notice to third party agencies: Please refrain from calling or emailing our team directly. Our in-house Talent Acquisition team manages all recruiting operations, including the selection and management of all external suppliers.

HMT has an immediate need for an API 653 certified Inspector to assist with performing inspections in accordance with API standards: Perform API 653 inspections per customer's scope of work and HMT's internal process and procedures Maintain a positive relationship between client, facility and customer Properly interpret regulations, codes and industry standards Ensure that all HMT safety policies and procedures are being followed Required Qualifications: Must hold API Certification and have API Inspection work experience. Must be technically competent and knowledgeable in the application of the current inspection codes. Preferred additional certifications: Current CPR & First Aid TWIC Card Current AOCF and or PMT III (DOT OQ) Respirator fit tested (current) Trained in OSHA 10 and or OSHA 30 JLG lift operator certification (may or may not be approved by HMT Safety Dept.) Current safety training (within the last 12 months) to include but not limited to confined space, fall protection, LOTO, HazCom, etc. About HMT: HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

RK&K is currently hiring a Roadway Inspector to join our Construction, Engineering, and Inspection (CEI) team in Orlando Florida. This position is in our Construction Management group which oversee the contractor's operations on roadway and bridge construction projects. Essential Functions Assisting the Project Administrator or Senior Inspector in daily roadway inspection Ensuring contractor compliance alongside quality control Performing verification inspections and testing as required These tests and inspections include, but are not limited to: earthwork, asphalt, concrete, bridge and miscellaneous structures, toll facilities, lighting, signalization, environmental compliance, maintenance of traffic, etc. This position receives general supervision and instruction from the Senior Inspector and/or Project Administrator Required Skills and Experience High school graduate or equivalent plus two (2) years' experience in roadway construction inspection, one (1) year of which shall have been in roadway construction inspection Must have the following as required by the scope of work for the project: CTQP Concrete Field Inspector Level I CTQP Asphalt Roadway Level I CTQP Earthwork Construction Inspection Level I Preferred Skills and Experience BS in Civil Engineering from an accredited institution Previous roadway inspection experience Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Inspector Apprentice Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Hourly base pay rate is $13.37 - $20.00/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description * Verify vehicle information based on work order information - identify damage, missing parts, and mechanical problems by inspecting all customer vehicles at time of receipt (i.e., interior, exterior, odometer reading, trunk area, engine compartment), noting any damage or repair to frame/paint, engine noise, AC/heater operation, radio, tire condition, etc. * Prepare and complete all necessary documentation. * Set up system for day-end; perform day-end procedures. * Maintain knowledge to ensure all policies and procedures are followed. * Write electronic condition reports (ECR). * Conduct OVE courtesy walks around inspections. * Maintain knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based applications. * Maintain a working knowledge on improvements and changes concerning body mechanical, frame labor, inspection techniques, etc. * Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. * Perform other duties as assigned by management. * May be required to work overtime as business needs dictate. Minimum Qualifications: * High School Diploma/GED. * Generally, less than 2 years of experience in a related field. * Safe driver's needed; valid driver's license required. * Excellent communication and interpersonal skills required. Preferred: * Strong technical understanding, with good organizational skills needed. * Ability to multitask, follow directions and take instruction. * Advanced computer skills. * Ability to stand, walk, or sit for prolonged periods of time; ability to bend, stoop, squat or kneel; ability to lift and hold at least 10lbs at waist level for an extended period of-time; ability to lift-up to 30 lbs. Work Environment: * Exposure to outdoor weather and inclement conditions. * Moderate noise level. * May be exposed to fumes and odors. * May be required to work overtime (more than 40 hours per week) as business needs dictate. Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship.

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent (1099 Sub-Contractor) Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Inspector Apprentice Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Hourly base pay rate is $13.37 - $20.00/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description Verify vehicle information based on work order information - identify damage, missing parts, and mechanical problems by inspecting all customer vehicles at time of receipt (i.e., interior, exterior, odometer reading, trunk area, engine compartment), noting any damage or repair to frame/paint, engine noise, AC/heater operation, radio, tire condition, etc. Prepare and complete all necessary documentation. Set up system for day-end; perform day-end procedures. Maintain knowledge to ensure all policies and procedures are followed. Write electronic condition reports (ECR). Conduct OVE courtesy walks around inspections. Maintain knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based applications. Maintain a working knowledge on improvements and changes concerning body mechanical, frame labor, inspection techniques, etc. Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. Perform other duties as assigned by management. May be required to work overtime as business needs dictate. Minimum Qualifications: High School Diploma/GED. Generally, less than 2 years of experience in a related field. Safe driver's needed; valid driver's license required. Excellent communication and interpersonal skills required. Preferred: Strong technical understanding, with good organizational skills needed. Ability to multitask, follow directions and take instruction. Advanced computer skills. Ability to stand, walk, or sit for prolonged periods of time; ability to bend, stoop, squat or kneel; ability to lift and hold at least 10lbs at waist level for an extended period of-time; ability to lift-up to 30 lbs. Work Environment: Exposure to outdoor weather and inclement conditions. Moderate noise level. May be exposed to fumes and odors. May be required to work overtime (more than 40 hours per week) as business needs dictate. Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship.

Property Inspector Looking for a career that pays well without the pressure of selling? Join our team and earn $50K to $75K per year - no selling involved! Responsibilities: • Canvass local neighborhoods to identify homes with old original windows and roofing • Talk with homeowners about the benefits of brand new impact windows & roofing • Schedule appointments for FREE inspections Qualifications: • Outgoing personality • Strong communication skills • Driven to achieve goals Compensation: • Salary, Commission & Bonus (Earn $50,000 to $75,000 per year) • 5-day work schedule (No Weekends!) • Full training provided • Career growth opportunities Apply Now! Send your phone number and updated resume. Qualified applicants will be contacted for a phone interview.

We are looking for a diligent and detail-oriented Quality Inspector to join our warehouse team. The Quality Inspector will be responsible for ensuring the quality and quantity of items received and shipped for orders related to the Department of Defense (DOD). The ideal candidate will have strong organizational skills, a keen eye for detail, and the ability to work in a dynamic, fast-paced environment. What You'll Do: Receive and inspect incoming shipments to ensure items meet required quality and quantity specifications. Conduct random quality inspections of assemblies throughout the production process and perform final inspections of completed orders before shipment. Handle necessary paperwork, including inventory records, inspection reports, and receiving forms. Accurately enter inspection and inventory data into the company's computer system. Keep track of job orders, percentage of completion and deadlines. Assist the production department with tasks as needed, demonstrating flexibility and a willingness to take on multiple roles. What You'll Need: Must possess a valid forklift operator license. Must be a U.S. citizen (required for DOD-related work). Ability to pass a background check and drug test. Bilingual (English/Spanish) preferred. High attention to detail and strong organizational skills. Familiarity with warehouse operations, inventory management, and quality control processes. Handy and comfortable working with tools and in a hands-on environment to optimize processes and space utilization. Flexibility to wear multiple hats and assist other departments as needed. Basic computer proficiency for data entry and reporting. Ability to lift and move objects weighing up to 50lbs. Ability to stand and walk for extended periods in a warehouse environment. What You'll Get: Range: $42,000-$45,000 Medical Insurance: Employer pays 50% of medical insurance cost 6 annual paid holidays (available after 90 days of employment) 5 days' vacation + 3 sick days after 1 year of employment

Aoka is a third-party municipal services provider supporting federal, state, and local governments with code compliance, inspections, and consulting services. We specialize in delivering efficient solutions for building safety, housing standards, and regulatory compliance. Our proprietary software, VertexPlans, streamlines inspection services by integrating plan reviews, field inspections, and reporting into one seamless platform-ensuring faster turnaround times and improved communication for our clients. We are currently seeking a qualified OHP compliance Inspector to perform Housing Quality Standards (HQS) inspections for Senior care facilities. Responsibilities Schedule and conduct on-site inspections for new construction and substantial rehabilitation of Senior Living properties Evaluate units for compliance with HUD Housing Quality Standards (HQS) Complete inspection reports and required documentation in accordance with HUD and company guidelines Qualifications Willingness to travel for inspections Valid driver's license and reliable transportation ICC certification, engineering license, or architectural license OR At least 5 years of experience in multifamily housing inspection is required Compensation $30 - $60 per hour, based on experience and qualifications Apply Now to Join Our Growing Team! Aoka is proud to be an equal opportunity employer and provides equal employment opportunities (EEO) to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity or genetics.

As a Quality Control Inspector, you will play a vital role in maintaining the highest standards of quality for our products. You will be responsible for thoroughly inspecting materials, components, and finished products to ensure compliance with specifications and industry standards. Your meticulous eye for detail will help us deliver products that meet and exceed customer expectations. Additionally, you will have the opportunity to collaborate with cross-functional teams, identify process improvements, and contribute to a culture of continuous improvement. You will have the chance to showcase your commitment to quality as you participate in our annual AISC QC Audits and develop goals to improve and promote quality throughout the organization. Your ability to work well with production to solve any issues that arise will be crucial in maintaining our high standards. Embrace this exciting opportunity to make a significant impact on our quality control processes and join our team of dedicated professionals. Qualifications: A minimum of 5 years of experience in laying out and fabricating steel is required for this position. Ability to accurately read and interpret fabrication and construction drawings will be essential in ensuring the quality of our products. Welding Certification in D1.1 and/or D1.5 is preferred, as it demonstrates your proficiency in welding standards. Strong attention to detail, excellent problem-solving skills, and the ability to work collaboratively with cross-functional teams is crucial in maintaining our high standards of quality. Benefits: Health/dental/vision/disability insurance Paid time off Paid holidays 401k with employer match and 100% vesting from the beginning Paid weekly Company Paid Life Insurance Selected applicant will be subject to a pre-employment physical with drug/alcohol testing.

Job Title: Quality Control Inspector Division: FiOptix Inc FSLA Status: Non-Exempt Reports To: Project Manager Job Summary: This position is responsible for identifying and escalating quality deficiencies to support the completion of assigned work. Essential Duties and Responsibilities: Perform real time inspections evaluating safety, compliance standards, appearance, and customer experience Schedule and complete a final inspection of work prior to customer walkthrough Complete and submit timely and accurate quality control reports into the appropriate database Develop and maintain relationships with the quality control counterparts of our customers Respond appropriately to customer complaints and inquiries and escalate matters as required Execute target amount of job safety observations Identify areas of improvement to enhance quality and escalate recommendations to management Complete all required Company documentation Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: One-year telecommunications quality control experience One-year underground construction, aerial construction, and/or multi dwelling unit (MDU) experience Knowledge of highway traffic control standards Technical Skills: Computer and Microsoft Office proficiency Ability to use a wireless tablet Proven knowledge of utility depths and placement Proven ability to read and interpret design prints Soft Skills: Highly organized and detail orientated Strong verbal and written communication skills Ability to work independently and as a member of various teams Ability to multi-task and work in a fast-paced environment under tight deadlines Ability to lead, teach, and train other employees Physical Requirements: Must be able to pass pre-employment screening that includes background and drug testing Must have a valid driver's license and a driving record that meets Company requirements Must be in good physical condition with the ability to stoop, crawl, bend at the knees and waist, squat and lift up to 50 lbs. Ability to stand for long periods of time on varied surfaces Ability to work outdoors in all types of weather May be required to work long and unpredictable hours Ability to travel up to 100% of the time, including short notice travel. Travel includes local site travel or national travel depending on business needs. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations

Job Description Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a full-time first shift Quality Control Inspector in 2025 who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************