Inspector jobs in Philadelphia, PA - 192 jobs

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Craft InspectorLocation: Middletown, PA (Surrounding Areas) Duration: 03/010/2024-12/31/2024Job Description:· The Craft Inspector performs the quality control (QC) function over the contractor's work as a part of the Company's quality assurance program and is responsible for the completion of all activities in his area of assignment in accordance with the appropriate Company specifications and the approved for construction drawings.Duties may include, but are not limited to:· Right-of-Way Clearing and Grading' Ditching, Stringing, and Bending' Lowering, Padding, and Backfilling' Road Boring' Tie-ins' Clean-up' inspection.· The inspector works under the direction of the Chief Inspector may be assigned additional responsibilities as required· The inspector provides quality assurance through inspection of work and materials for conformance to requirements.· The inspector is to complete required documentation (i.e. reports and log books) in a timely, concise, and accurate manner.· Familiarization with the approved construction drawings and the appropriate Company specifications in order to assure the work is performed in accordance with those requirements.· Familiarization with Contract documents (Agreement) as it relates to his or her duties on the project· Familiarization with applicable industry and regulatory codes' Familiarization with the Pre-Job Notes · Familiarization with the sequence of the work and plan inspection of upcoming activities· Report safety issues to the Chief Inspector and Safety Inspector· Drawing markups for as-built records· Hydrostatic tests and any test failures· Quantity, size, wall thickness, grade, heat number, other pipe nomenclature and pipe coating, and its location· Understanding the basics of pipe alignment, welding, and its inspection (specialized inspectors are required for the actual inspection)· Condition of ditch bottom Rocks, roots, clay, and other debris· Lifting and lowering in equipment· Understanding, monitoring, assessing, and reporting on painting and coating activities and items including but not limited to:· Vendor Product data sheet utilization· Proper application of paint and/or coating· Proper setup and use of holiday detector / jeep Requirements:· API 1169· OSHA 10 or OSHA 30 C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Quality Inspector's role is to utilize curtainwall knowledge alongside 2D and 3D engineering / CAD drawings to identify potential quality and installation issues in curtainwall components or units. A Quality Inspector may be assigned work in different areas, depending on production requirements. All Quality Inspectors are required to abide by all applicable New Hudson Facade requirements, as outlined in the Employee Handbook. Quality Inspectors directly report to the Quality Supervisor. Role and Responsibilities: Inspect and approve curtainwall components or units at various points of the manufacturing process for compliance with curtainwall quality/cleanliness expectations. Inspect and test incoming materials (aluminum, glass, stone, machined parts, etc.) against drawings, procedures and other defined quality standards; enters inspection results in Epicor; maintains various inspection logs and spreadsheets; inspects completed curtain wall units and crating. Enters NCRs for discrepant materials as found after inspection; assists the QC Coordinator in tagging and managing rejected parts. Read and manipulate 2D / 3D engineering CAD drawings to determine if curtainwall units and its individual components are fabricated and installed correctly. Communicate with upstream quality / assembly personnel when quality issues are identified. Provide information that can support the quality of the completed curtainwall unit. Maintain inspection logs and spreadsheets, as needed. Utilize ADP / Epicor to track hours spent supporting projects. Comply with all safety standards and requirements defined by NHF. Care of all assigned tools (calipers, spectrophotometers, protractors, etc.). Other tasks as required by management. Skills and Abilities: Experience working in a heavy manufacturing or large-assembly environment. Ability to read and understand 2D engineering drawings. Familiarity with manipulating 3D engineering drawings on CAD software. Advanced knowledge and experience with measurement tools (Tape measure, caliper, protractor, etc). Ability to act with professionalism; ability to multitask. Ability to follow both written and verbal instruction. Communication skills (both written and verbal). Physical Requirements: Ability to move equipment weighing up to 50 pounds. Applicants must be able to perform repetitive lifting and other physically demanding tasks. Qualifications and Education Requirements: HS Diploma AS Degree or higher preferred. Experience in the curtainwall / construction industry preferred. New Hudson Facades is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

If you are looking to be part of an engaging team and want to contribute to the success of a customer focused business operation, DC Fabricators, Inc. wants to talk with you! We offer competitive pay, benefits starting 1st of the month following hire date and a generous PTO accrual. DCF is a major supplier to the Navy Shipbuilding Program. Benefits: Offering 401(k), 401(k) matching, health insurance, dental insurance, vision insurance, disability insurance, flexible spending account (FSA), employee assistance program (EAP), life insurance, paid time off, parental leave, and tuition reimbursement. Job Summary: This position is concerned with the performance of dimensional inspection and non-destructive examination of component parts in accordance with established procedures and specifications. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Job Responsibilities: * Perform inspections on all parts, assemblies, and fabrications as specified on drawings and route cards; record results of the inspection and indicate disposition. * Set-up assemblies and perform dimensional inspections using scales, tape measure, layout and optical equipment, and other hand tools such as calipers, micrometers, depth gages. * When performing dimensional inspections of parts machined by outside vendors, review Purchase Order to ensure all requirements have been met. * Perform surveillance on material identification in the shop and in stores; insure segregation of scrap material from material in-process. * Maintain calibration program for company inspection equipment, tools and personally owned gages. * Visit vendor facilities to perform inspections of vendor work. * Work with customer representatives and/or Government Inspectors to complete customer inspection points as assigned. * Maintain inspection records and documentation files as required. * Provide written reports as required. * Other duties as assigned. * US Citizenship required at time of hire. SKILLS & ABILITIES Education: * High School Graduate, or the equivalent, with additional instruction in NDT and/or Dimensional Inspection. Completion of an apprenticeship program is desirable. Experience: * Two (2) years of NDE and/or Dimensional Inspection experience in an industrial environment, preferred. * Knowledge of dimensional inspection principles and their application to industrial inspection problems. * Must apply individual initiative to accomplish the necessary inspections and conduct audits to assure compliance with required processes. * Must be able to read and interpret blueprints commonly found in heavy manufacturing environments. * Excellent communication skills, both verbal and written. Computer Skills: * Computer skills required. Must have a working knowledge of ERP systems and Microsoft applications such as WORD, Excel, and Outlook * Minimum of two (2) years of Dimensional Inspection experience in an industrial/machine shop environment * Must be able to read and interpret machining drawings. DC FABRICATORS INC. is an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Disabled/Sexual Orientation/Gender Identity Job Type: Full-time Pay: $55,000.00 - $65,000.00 per year Benefits: * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Life insurance * Paid time off * Retirement plan * Vision insurance Work Location: In person

America's 1st online casino is hiring! At Evolution, our talent is live, the players are virtual. Every day, thousands play with real money, from their mobile devices, on one of our 50+ games. Since 2006, Evolution has been the leading product company of virtual casino games. We've evolved the gaming industry by designing and hosting the most streamed, interactive casino tables and slots in the world. Our North American talent broadcasts 24/7 from our studios in Atlantic City, New Jersey, Southfield, Michigan, Philadelphia, Pennsylvania, Fairfield, Connecticut and Vancouver, Canada. Job Description To work within your own team to produce the required results and to meet company targets respecting deadlines. Inspect a set number of boxes per day, with precision and accuracy Spot errors and defects in cards and follow the proper procedure for replacing or removing. Inform the manager about any type of incident. Set up card boxes for card change procedures Strong record-keeping Qualifications Must be able to work a flexible schedule including weekends and holidays. Must be 18 years of age or older. Required to successfully complete pre-employment drug background checks. Service-minded with excellent communications skills and a positive attitude The ability to work as part of a team and be adaptable to changing business needs 1+ years of work experience in a service-oriented role Responsible, dedicated, and dependable Additional Information This position is an excellent opportunity to join the fast-growing team, we also offer: $16/hr entry level with opportunity growth 10 days of Paid Time Off Annually 5 Sick Days Paid Break Time 401K Match Technique Training & Career Growth Opportunities Centrally located modern studio environment with break room & refreshments Evolution is a market-leading developer and provider of products and services for online casino entertainment. Our excellence is driven by over 16,000 EVOlutioneers across 30 markets worldwide, working in product innovation, software development, IT solutions, game hosting and business support. Evolution's dynamic and creative environment creates a unique opportunity for personal and professional growth. Our integrated business-to-business solutions guarantee that our clients can always provide an unrivalled online entertainment experience to their players globally. We thrive on remaining an award-winning digital powerhouse of entertainment products and services with an ever-expanding line-up of product brands: Evolution Live, NetEnt, Red Tiger, Ezugi, Big Time Gaming, Nolimit City and DigiWheel. Evolution is a Swedish company founded in 2006 and listed on Nasdaq Nordic (EVO). Evolution USA was established in 2018. More information on Evolution.com. For more information visit ***************** All your information will be kept confidential according to EEO guidelines.

America's 1st online casino is hiring! At Evolution, our talent is live, the players are virtual. Every day, thousands play with real money, from their mobile devices, on one of our 50+ games. Since 2006, Evolution has been the leading product company of virtual casino games. We've evolved the gaming industry by designing and hosting the most streamed, interactive casino tables and slots in the world. Our North American talent broadcasts 24/7 from our studios in Atlantic City, New Jersey, Southfield, Michigan, Philadelphia, Pennsylvania, Fairfield, Connecticut and Vancouver, Canada. Job Description * To work within your own team to produce the required results and to meet company targets respecting deadlines. * Inspect a set number of boxes per day, with precision and accuracy * Spot errors and defects in cards and follow the proper procedure for replacing or removing. Inform the manager about any type of incident. * Set up card boxes for card change procedures * Strong record-keeping Qualifications * Must be able to work a flexible schedule including weekends and holidays. * Must be 18 years of age or older. * Required to successfully complete pre-employment drug background checks. * Service-minded with excellent communications skills and a positive attitude * The ability to work as part of a team and be adaptable to changing business needs * 1+ years of work experience in a service-oriented role * Responsible, dedicated, and dependable Additional Information This position is an excellent opportunity to join the fast-growing team, we also offer: * $16/hr entry level with opportunity growth * 10 days of Paid Time Off Annually * 5 Sick Days * Paid Break Time * 401K Match * Technique Training & Career Growth Opportunities * Centrally located modern studio environment with break room & refreshments Evolution is a market-leading developer and provider of products and services for online casino entertainment. Our excellence is driven by over 16,000 EVOlutioneers across 30 markets worldwide, working in product innovation, software development, IT solutions, game hosting and business support. Evolution's dynamic and creative environment creates a unique opportunity for personal and professional growth. Our integrated business-to-business solutions guarantee that our clients can always provide an unrivalled online entertainment experience to their players globally. We thrive on remaining an award-winning digital powerhouse of entertainment products and services with an ever-expanding line-up of product brands: Evolution Live, NetEnt, Red Tiger, Ezugi, Big Time Gaming, Nolimit City and DigiWheel. Evolution is a Swedish company founded in 2006 and listed on Nasdaq Nordic (EVO). Evolution USA was established in 2018. More information on Evolution.com. For more information visit ***************** All your information will be kept confidential according to EEO guidelines.

At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability

Conduct thorough inspections of various properties to ensure compliance with regulations and standards Document inspection findings and prepare detailed reports Identify any issues or violations and recommend corrective actions Communicate effectively with property owners, contractors, and other stakeholders Stay updated on industry regulations and best practices Collaborate with team members to achieve inspection goals Requirements: Proven experience as an inspector or similar role Knowledge of relevant regulations and standards Excellent attention to detail Strong communication and reporting skills Ability to work independently and as part of a team Certification or licensure may be required Benefits: Competitive salary Healthcare and wellness benefits Paid time off Career growth opportunities Training and development programs

Industrial Inspection & Analysis is searching for an ANSI Inspector located in Pennsylvania to join our Lifting Services team. The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure the heavy equipment is in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications Mechanically inclined. Basic knowledge of mechanical processes, movement, and assembly. Basic knowledge of hand tools. Proficient computer skills. Strong communication skills. Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution. Must be able to work independently with some direction from management. Problem solver, detail oriented. Job Requirements Able to stand, sit, squat, climb, crawl and twist for extended periods of time. Ability to lift up to 50 pounds. Must be punctual, accountable, and provide high quality customer service. Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays. Must have valid driver's license and be able to pass a background check and drug screen. We offer medical, dental, and vision benefits, a 401K plan, and paid time off and holidays. Industrial Inspection & Analysis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. IIA complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, without limitation, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

ERM is hiring Inspectors to perform inspections of water service lines, and work in field teams of two to determine the service line material. Work will occur in properties throughout Northwest to Northern Philadelphia, PA (Upper Darby with Abington and Montgomery County next year). The projects we work on and the services we provide demand teams of multi-disciplinary professionals working collaboratively to meet our clients' needs. The role of an Inspector working within this program requires the use of multiple methods to perform detailed inspections of customer-side water service lines to identify the service line material. This is a part-time (20 hours/week), limited-term role for the duration of 4 months, renewable. RESPONSIBILITIES: Conducting field inspections to determine water service line material. Interacting with, and serving as a point of contact for ERM with landowners, contractors, clients, and other project team members. Reviewing and implementing project documents and data entry. Providing technical leadership, support, and direction to field staff. This includes the coordination of daily inspections, schedules, and meetings. Distributing water sampling test kits and contracts to landowners, as needed. Documenting service line material findings by preparing daily written inspection reports that provide up-to-date, consistent written and photo documentation of activities observed in the field. Participating in various meetings. Performing additional tasks as assigned or required. REQUIREMENTS: High School Diploma, GED, or equivalent. A basic understanding of building construction and the ability to locate a water meter/shutoff is preferred but not required. Necessary training will be provided. Strong oral and written communication skills. Proficient technical skills, including, but not limited to, experience using Microsoft Office programs, digital cameras, and other handheld data collection devices. The ability to travel overnight on temporary assignments with short notice. Must possess a valid Driver's License. Must be able to comply with ERM health and safety procedures, Must have a good driving record. Who We Are: As the largest global pure play sustainability consultancy, we partner with the world's leading organizations, creating innovative solutions to sustainability challenges and unlocking commercial opportunities that meet the needs of today while preserving opportunity for future generations. At ERM we know that creating a diverse, equitable and inclusive work environment is an essential part of making our company a great place to build a career. We also see our diversity as a strength that helps us create better solutions for our clients. Our diverse team of world-class experts supports clients across the breadth of their organizations to operationalize sustainability, underpinned by our deep technical expertise in addressing their environmental, health, safety, risk and social issues. We call this capability our “boots to boardroom” approach for its comprehensive service model that allows ERM to develop strategic and technical solutions that advance objectives on the ground or at the executive level. Please submit your resume and brief cover letter. Based on review of these responses, shortlisted candidates will be invited for interviews. ERM does not accept recruiting agency resumes. Please do not forward resumes to our jobs alias, ERM employees or any other company location. ERM is not responsible for any fees related to unsolicited resumes. ERM is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, gender identity, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Thank you for your interest in ERM!

The NDT Advanced Services CWI Inspector is responsible for performing visual inspections on welded products and structures to ensure that work produced by welders meets specifications in NDT services. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values. * Performs internal and external inspections to determine if welded products and structures meet the acceptance criteria of a specific code, standard or document. * Properly interprets regulations, codes, and industry standards. * Ensures work is implement as required by project specifications. * Compiles and submits completed inspection reports in a timely manner. * Completes the Inspection, Test Plan and status report. * Reviews surveillance documents for any issues. * Schedules and conducts Pre-Inspection Meetings. * Communicates regularly with customers on scheduling activities as detailed by the customer. * Plans travel and surveillance activities/ visits to effectively utilize time and minimize expenses. * Maintains the Inspection Folder. Job Qualifications * High school diploma or equivalent preferred * Previous industry related inspection experience preferred. * SCWI, CWI or CAWI certification required. * Must be able to pass a Vision Test. * Travel Requirements: 0% - 50% Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills * This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Precision. Purpose. Performance. At TrekConnect, a subsidiary of Heilind Mil-Aero, we build high-reliability cable and harness assemblies used in aerospace, defense, and other mission-critical applications. As a Quality Control Inspector, you'll play a key role ensuring every product leaving our facility meets the highest technical and reliability standards. This role is ideal for a detail-oriented individual with experience inspecting electrical or mechanical assemblies, using precision tools, and working to IPC/WHMA and AS9100 standards. You'll join a collaborative team that values craftsmanship, learning, and excellence. What You'll Do * Perform incoming, in-process, and final inspections on cables, wire harnesses, and electronic assemblies. * Verify components and assemblies meet specifications, drawings, and manufacturing instructions. * Use precision tools such as calipers, micrometers, force gauges, and torque wrenches for measurement and verification. * Conduct visual inspections using magnification tools and lighting to ensure defect-free workmanship. * Prepare AS9102-compliant First Article Inspection Reports (FAIR) and maintain accurate inspection records. * Collaborate with Production and Engineering to identify, document, and resolve nonconformances. * Support electrical testing of assemblies to verify continuity, insulation resistance, and proper termination. * Maintain high levels of organization, accuracy, and adherence to ISO 9001 and AS9100 standards. Why Join TrekConnect * Be part of a skilled technical team producing high-reliability components for defense and aerospace industries. * Work in a clean, organized, and precision-focused environment where your craftsmanship makes an impact. * Opportunities for career advancement and certification training in quality and manufacturing. * Comprehensive benefits, including: Medical, dental, and vision coverage, 401(k) with company match, PTO and paid holidays, tuition reimbursement, wellness and pet insurance programs, employee discounts and referral bonuses. What You Bring * 2+ years of experience inspecting electrical, cable, or wire harness assemblies in a manufacturing environment. * Ability to read and interpret engineering drawings, schematics, bills of materials, and work instructions. * Proficiency with inspection tools (calipers, micrometers, rulers, torque wrenches, etc.). * WHMA/IPC-A-620 certification (or willingness to obtain). * Experience with ESD, J-STD-001, or fiber optic assemblies is a plus. * Working knowledge of ISO 9001 / AS9100 quality systems. * Strong attention to detail, documentation accuracy, and problem-solving skills. * Adherence to all Safety and PPE Requirements * Must be a U.S. Citizen due to Naval contractual agreements. Physical Requirements While performing the duties of this job the employee is often required to sit, stand, walk, use computers, read, write, type, use copy machines, file paperwork, use telephones, and utilize written and oral communication to interact with clients, co-workers, and customers. Exerting up to 10 pounds of force regularly, and occasionally up to 25 pounds of force to lift, carry, push, pull or otherwise move objects. Specific vision abilities required by this job include close visual acuity to perform activities such as: inspecting manufactured parts (with and without magnification), preparing/analyzing data and figures; viewing a computer terminal; extensive reading. Distance vision, peripheral vision, depth perception, ability to adjust focus and ability to distinguish colors and color variation of physical parts and components, and in documentation such as work instructions and engineering drawings. Reasonable accommodations may be made to enable individuals to perform the essential functions of this job. Working Conditions While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Pay = $990 monthly working 6 days per month

The Certified Welding Inspector (CWI) supports Sea Boxs quality objectives by setting and implementing the companys standard for welding and workmanship. Sea Box, Inc. seeks a Certified Welding Inspector (CWI) that sets, maintains, and finds ways to improve a standard by which quality and success is measured. It will leverage ones skill and experience to set an example for others to learn from and live up to. The Certified Welding Inspector reports to the Quality Department Manager and works in partnership with Production Department personnel and Project Managers. The successful candidate will get in front of quality issues by identifying them before they become a problem and maintain direct/ ensure the companys welding program in accordance with AWS/SNT-TC-1A. Responsibilities: · Implement and report on welding and NDT inspection processes · Review and understand SOWs and Mil-Specs in order to ensure compliance · Train, certify, qualify, and monitor welders/inspectors to have 100% accountability of status · Quantitatively assess welding performance company-wide · Perform in-house calibration of welding equipment · Maintain calibration records and labels for welding equipment and maintain schedule/ tracking · Complete and maintain quality department reporting and documentation · Monitor and maintain welding certifications and related documentation · Provide welding expertise for nonconformance/corrective action investigation Requirements: · AWS Certified Welding Inspector · Knowledge of MIL-standards and international standards · NDT Level II: visual testing, magnetic particle, and penetrant testing · Ability to understand structural steel plans and technical specifications · Proficiency with weld inspection methods and tools · Ability to complete and communicate daily work reports · Beginner to intermediate skills with Microsoft Word and Excel · Ability to work independently with minimal supervision · Willingness to develop skill sets as needed through training/certification programs Experience: · 2-5 years of experience in quality related to welding · Proven leadership experience in a quality environment a plus Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $55,000 - $70,000 Location: This position is onsite (non-remote) at the Companys corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Companys normal 8:30am 5:30pm hours of operation. PI5d1975600f0d-31181-38565051

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)