Inspector jobs in Reno, NV

Dassault Falcon Jet -Maintenance, Repair and Overhaul (MRO) facility in Reno, Nevada is seeking a full-time Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. Also, providing the approval for return to service with respect to the work performed for work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. Job Duties & Responsibilities: * Responsible to Quality Assurance for quality and airworthiness and may report to Crew Chief for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, makes adjustments and repairs, replaces components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. Requirements * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 3 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment and tools used to perform aircraft maintenance and alterations. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills/ * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training Compensation and Benefits The compensation for this position typically falls between $38 - $50 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime. This position may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs line clearances. Completes necessary documentation, such as production and quality Batch Production Record (BPR) information, associated current Good Manufacturing Practices (cGMP) forms, and daily activity reports. Reviews documentation (BPR, Machine Activity Logbooks (MAL), Laboratory Testing Worksheets, and other logs and inspection sheets) for accuracy and compliance with cGMPs and Standard Operating Procedures (SOP). Assists the MQ Samplers with sampling and the release of incoming materials in LIMS. Performs MQ Sampler duties as required (i.e. covers PTO, absences, business need). Completes rounds (real time line and documentation audit) throughout the shift. Performs allergen and Adenosine - 5 - Triphosphate (ATP) swabbing on equipment. Performs line inspection checks. Performs Acceptable Quality Limits (AQL) inspections. Performs preliminary investigations of the deviation and QC Hold process. Performs data entry, including LIMS entries and Oracle entries, including Oracle status changes. Performs daily internal audits to ensure compliance with GMPs and SOPs. Communicates problems/out of specification issues to supervisor/lead and operations personnel. Informed and held accountable for food safety and regulatory responsibilities. Identifies and immediately notifies management about actual or potential food safety issues. Resolves food safety issues within their scope of work. Complies with safety and GMP requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP's, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school degree or equivalent and a minimum of 1-3 years quality related experience OR equivalent combination of experience and education. Degree in a science field helpful. Experience in quality processes, inspection, and GMP environment preferred. Basic computer skills with Word and Excel required. PERFORMANCE ABILITY Inspector I will be assigned to work in any area in which he/she has been trained based on the needs of the department on a given day. Performs routine tasks with limited decision making required. Interacts with production and audits production operations in real time. Assists with performing root cause analyses into issues and makes good decisions on corrective actions in a timely manner with some guidance when needed. Good technical writing skills to assist with holds and deviations . Demonstrated ability to consistently meet quality, safety and efficiency goals. Prioritizes and calmly handles multiple tasks simultaneously in a fast-paced environment; exhibits flexibility and willingness to change tasks frequently; and works in different areas as needed. Learns quickly, operates independently, and assumes responsibility for new tasks. Applies critical thinking skills to a variety of manufacturing issues and makes decisions to solve them. Good attention to detail skills required. Collaborates with others (including Production and the Lab); exhibits strong teamwork skills; and actively listens and communicates effectively with others. Demonstrates integrity and models NOW's core values. Consistently follows all company policies and procedures, including safety. LANGUAGE SKILLS Ability to read and interpret documents such as product specifications, departmental instructions, and procedure manuals. Ability to write routine e-mails to communicate within QC and with operations personnel. Accurately and truthfully completes documentation. Ability to use good technical writing skills to close deviations and holds as well as update quality documents. Good verbal communication and listening skills. MATHEMATICAL SKILLS Ability to apply concepts such as fractions, percentages, averages, ratios, proportions, and the metric system to practical situations. REASONING ABILITY Ability to compare results to specifications to determine if result meets requirements. Ability to interpret a variety of instructions. Good problem solving skills required. Ability to investigate situations and reasons to determine root cause. OTHER SKILLS AND ABILITIES Ability to work a flexible schedule, including off shifts and weekends. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and/or walk throughout the facility; ascend and/or descend stairs; forward bend and squat; use hands to inspect, handle, and feel; and reach with hands and arms. The employee is regularly required to enter information into a computer, handle product in various stages and forms (i.e. raw materials, work in progress, and finished products in liquid, powdered, and tablet forms), in addition to equipment and/or tools. The employee frequently is required to use his/her sense of smell. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: Lift up to 50 lbs. from 31 inches, carry for 5 feet and return to 31 inches. Lift up to 50 lbs. floor to waist height. Grasp up to 50 lbs. of force. Lift up to 50 lbs. and move box 10 inches to side, then back again at 36 inches. (MQ Sampler role only) WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Works around ingredients such as vitamins, minerals, amino acids, botanicals, etc. and chemicals such as alcohol, that may require respiratory protection. May be exposed to potentially hazardous chemicals and biological materials. Employee works near moving mechanical parts. Frequently exposed to vapors, airborne particles and/or herbal aromas, some classified as allergens or irritants. This position works in all areas of NOW's manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes, (powders and liquids), equipment, and packaging. Frequently exposed to all of the FDA designated major food allergens (Milk, Eggs, Fish, Crustacean shellfish (e.g. crab, lobster, shrimp), Tree nuts (e.g., almonds, walnuts, pecans), Wheat and Soybeans, except for peanuts. As required, works in a loud area that requires hearing protection and other protective equipment to be worn. 2025 BENEFITS AT A GLANCE #hpnow

The Metals Inspector reports to the Stockpiling Supervisor, the Shredder Operations Supervisor, or the Terminal Operations Manager. The Metals Inspector is responsible for observing and monitoring the delivery of material to verify conformance to quality and quantity specifications, while ensuring that all of his/her efforts are compliant with the company Health, Safety, and Environmental standards. Duties may include assisting with daily production operations, as well as receiving and stockpiling of materials and products. The Metals Inspector should possess knowledge of raw materials, production processes, and other techniques required for maximizing the receipt and transfer of quality product. This position operates under flexible parameters. The primary goal of this position is to achieve excellence in all facets of the position. Providing the highest quality product safely, effectively and efficiently decreases accidents and errors and increase profits. Essential Functions Environmental and Health & Safety (H&S) * Strictly adheres to all Metals Recycling Business Health, Safety, and Environmental standards. * Provides a safe environment for all employees, customers and visitors. Operational Performance & Best Business Practices * Inspect shipments of scrap metal received via truck, rail car, or ship to ensure material meets specifications and is free from environmental hazards in accordance with scrap acceptance policy. * Correctly identify and record inspection data such as weight, grade, content, and quantity of scrap metal. * Notify operations and commercial supervisors of problems and assist in recommending remedial procedures to correct violations or issues encountered during inspection. * Collaborate with commercial department concerning quality and consistency of customer deliveries. * Direct the unloading of vehicles delivering scrap to ensure safe and orderly traffic flow within the facility. * Provide backup or assistance throughout the yard as needed or assigned. Equipment & Maintenance * Report all equipment deficiencies or malfunctions requiring maintenance or repair to the proper supervisor. Internal Control Responsibilities Supports the Company's Internal Control process which includes understanding, communicating, and complying with defined internal controls as well as suggesting and making modifications to the policies, procedures, and controls to better relate to the business. Communicates upward problems in operations, noncompliance with the code of conduct, or other policy violations or illegal actions. Interpersonal Contacts Direct contact with Stockpiling Supervisor, Shredder Operations Supervisor, or Terminal Operations Manager, operations production employees, and customers. Face-to-face and radio communication required daily. Job Conditions This position is regularly exposed to all weather conditions. Physical hazards such as noise, fumes, and dirt are present due to the equipment, machinery, and scrap as would be found throughout the scrap yard. Safety shoes, hearing protection, respirators, face shields, and additional personal protective equipment as needed, must be worn to eliminate the risks associated with these hazards. Travel is not required for this position. Handling multiple issues regarding safety and maintenance increases pressure. Work load may be unpredictable and pressure can be substantial during peak times. Critical deadlines require considerable adaptability. Disturbances of work flow and/or irregularities in work schedule are expected and occur on an intermittent basis. Extra hours may be required, sometimes on weekends, weekdays, and holidays. Physical Activities Required to Perform Essential Functions Ability to: sit rarely; stand and walk frequently on uneven ground and throughout the yard; lift and carry up to 50 pounds consistently; push and pull occasionally when moving materials; crouch or bend at the knees consistently to move or access materials or equipment; stoop or bend at the waist consistently to move materials; reach at arms length and overhead frequently; twist and turn at the neck and trunk continually; climb occasionally when obtaining items; manual dexterity required as the Metals Inspector will handle, grasp, and manipulate materials constantly; communicate by speech and hearing continually. Visual acuity needed for close detail work and documentation. Mental dexterity needed as the Metals Inspector will work independently while demonstrating attention to detail and continuous awareness. Qualifications * High School diploma, GED Certification, or equivalent experience in a similar role preferred. * Ability to develop and maintain constructive and cooperative working relationships with customers and other employees required. This position offers competitive pay along with a variety of benefits including medical, dental and vision plans for both you and your dependents; 401k with company match, paid time off which starts with your first check, and paid holidays. PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. All U.S. applicants must be 18 years of age or older and all Canada applicants must be 16 years of age or older. Radius Recycling participates in e-verify for all U.S. new hires. An offer of U.S. employment by Radius Recycling or any of its subsidiaries is contingent on the satisfactory completion of a post-offer drug screen and background check. All new hires must review and sign an Arbitration Agreement. This applies to all U.S. non-union employees. As an Equal Opportunity Employer, Radius Recycling does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.

Perform construction observation and materials testing to ensure compliance with approved plans, specifications, and quality standards. Key Responsibilities: Conduct construction observation to verify work is performed according to approved plans and specifications. Perform special inspections (reinforced concrete, prestressed concrete, masonry, etc.) and field-materials testing, including soil compaction, concrete strength, and asphalt density. Record and document daily test results and observations; communicate findings with the project management team. Prepare and organize test reports for different phases of the construction project. Maintain equipment and perform routine maintenance and calibration to ensure accurate readings. Qualifications & Skills: 5+ years of experience in quality control, construction materials testing, or related field. American Concrete Institute (ACI) Grade I certification. Nevada Alliance for Quality Transportation Construction (NAQTC) Sampling and Density certification. International Code Council (ICC) Certification(s); ICC certifications in Reinforced Concrete, Prestressed Concrete, and Masonry preferred. Valid drivers license and reliable transportation. Occupational Safety and Health Administration (OSHA) 10-hour Construction certification. Proficient in overseeing construction activities, conducting field tests, and preparing detailed reports. Familiarity with equipment, techniques, and protocols used in construction materials testing. Ability to work independently, manage time effectively, and collaborate in a team environment. Physically able to lift and carry up to 50 pounds and perform duties outdoors in various weather conditions. Working Place: Reno, Nevada, United States Company : Oct 16th Virtual Fair - Wood Rogers

Are you diligent and passionate about maintaining high standards? We're looking for a dedicated Quality Inspector to take a hands-on role in ensuring the quality and reliability of our products. In this role, you will perform well inspections, conduct audits, troubleshoot quality issues, and help define procedures that drive continuous improvement. You'll report directly to the Quality Manager and collaborate closely with other leaders across the organization. If you're someone who takes initiative to solve problems, focuses on details, and is dedicated to excellence, we want to hear from you! In this Role, Your Responsibilities Will Be: Perform inspection and testing on receiving parts Perform in-process inspection audits in the manufacturing area Generate nonconformance reports for parts that fail inspection Work with Assembly Operators and Manufacturing Engineers to affirm process controls Prepare, control, and maintain manufacturing and inspection documentation Prepare customer document packages Support the investigation of claims and root cause analysis, including, execution of corrective actions Assist the Quality Manager in the training of other employees Calibrate production and inspection gauges and maintain calibration record Perform non-destructive testing on castings and welded fabrications Maintain a 5S work environment May perform other duties as assigned Who You Are: You show tremendous amount of initiative in tough situations; is exceptional at spotting and seizing opportunities. You Actively seeks input from pertinent sources to make timely and well-informed decisions. You are able to adjust communication content and style to meet the needs of diverse partners. You always keep the end in sight and put in extra effort to meet deadlines. You have an in-depth understanding of how businesses work and make money. For This Role, You Will Need: High School Diploma or equivalent experience Three to five years of inspection experience in a manufacturing environment Hands on experience with engineering drawings and specifications Ability to read and interpret diagrams and Bill of Materials (BOMs) Familiarity with 5S methodology Solid understanding and use of calibrated measuring devices (Calipers, Micrometers and Durometers) Working knowledge of the Quality Management System (QMS) per ISO 9001-2015 Preferred Qualifications that Set You Apart: Excellent problem-solving skills and documentation/procedural skills. Ability to work in a team environment with fellow inspectors and other employees. Ability to use Microsoft Office Suite and Adobe Physical Job Requirements Stand up to eight hours per day Ability to work in a seated or standing position Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values!

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Humboldt, Washoe, Pershing, Churchill, Storey, Lyon, Carson City, Douglas Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Power your future with Qualus in our Program Management department as a Construction Quality Inspector. This position is responsible for onsite inspection of electric utility construction to ensure that projects are compliant with codes, regulations, and project specifications. This role reports to the Project Manager. Responsibilities * Inspects the day-to-day activities of multiple contractor crews, covering multiple disciplines, for substation project work. * Facilitates the installation of electric infrastructure and ensures that all safety standards, company construction standards, company specifications and governmental regulations are met. * Manages work to ensure that all performance objectives for cycle time are on target. * Prior to commencement of construction, coordinates with customer(s) at the jobsite to determine specific customer requirements, construction sequencing and provides site readiness verification. * Maintains frequent and regular contact with contractor supervision regarding job performance and documents results appropriately. * Ensures that the terms and conditions of the contract and technical specifications are met. * Makes the necessary field decisions regarding job changes and communicates them as necessary to the Supervisor and Program/Project Manager and Engineer of Record; documents all job changes to ensure compliance and ensures the updates get documented in the appropriate information technology systems. * Schedules and coordinates all required electric system outages. * Coordinates permit and work-with requirements with third party utilities and permit agencies. * Reviews and approves all documents submitted by the contractor verifying the accuracy and completeness of the documentation. * Regularly communicates job status to the appropriate parties to facilitate scheduling commitments. * Maintains customer coordination during construction phase and conducts job walk-down with customer and contractor at job completion. * Reports to service center, jobsite, or remote location. Qualifications * Thorough knowledge of Company work, environmental, and safety practices, including a working knowledge of electric operations, and the ability to maintain or obtain switching and outage authorization. * In-depth knowledge of materials, construction standards, regulations (OSHA), and safety requirements for electric transmission and substation construction. * Thorough knowledge of PC and job/work management applications including MS Office Suite. * Ability to interpret construction and vendor drawings, feeder prints and job jacket contents. * Ability to effectively plan, schedule, manage and coordinate daily work activities. * Strong interpersonal skills and the ability to anticipate and resolve problems promptly. * Required to have work experience and a minimum of 3-5 years of experience with construction management in the power delivery industry (specific to transmission line, distribution line, and/or substation project work) #LI-SB1 Benefits & Compensation Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited to education, qualifications, prior relevant work experience and work location. Company Overview Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. EEO At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************.

**Power your future with Qualus** in our Program Management department as a Construction Quality Inspector. This position is responsible for onsite inspection of electric utility construction to ensure that projects are compliant with codes, regulations, and project specifications. This role reports to the Project Manager. **Responsibilities** + Inspects the day-to-day activities of multiple contractor crews, covering multiple disciplines, for transmission line project work. + Facilitates the installation of electric infrastructure and ensures that all safety standards, company construction standards, company specifications and governmental regulations are met. + Manages work to ensure that all performance objectives for cycle time are on target. + Prior to commencement of construction, coordinates with customer(s) at the jobsite to determine specific customer requirements, construction sequencing and provides site readiness verification. + Maintains frequent and regular contact with contractor supervision regarding job performance and documents results appropriately. + Ensures that the terms and conditions of the contract and technical specifications are met. + Makes the necessary field decisions regarding job changes and communicates them as necessary to the Supervisor and Program/Project Manager and Engineer of Record; documents all job changes to ensure compliance and ensures the updates get documented in the appropriate information technology systems. + Schedules and coordinates all required electric system outages. + Coordinates permit and work-with requirements with third party utilities and permit agencies. + Reviews and approves all documents submitted by the contractor verifying the accuracy and completeness of the documentation. + Regularly communicates job status to the appropriate parties to facilitate scheduling commitments. + Maintains customer coordination during construction phase and conducts job walk-down with customer and contractor at job completion. + Reports to service center, jobsite, or remote location. **Qualifications** + Thorough knowledge of Company work, environmental, and safety practices, including a working knowledge of electric operations, and the ability to maintain or obtain switching and outage authorization. + In-depth knowledge of materials, construction standards, regulations (OSHA), and safety requirements for electric transmission and substation construction. + Thorough knowledge of PC and job/work management applications including MS Office Suite. + Ability to interpret construction and vendor drawings, feeder prints and job jacket contents. + Ability to effectively plan, schedule, manage and coordinate daily work activities. + Strong interpersonal skills and the ability to anticipate and resolve problems promptly. + Required to have work experience and a minimum of 3-5 years of experience with construction management in the power delivery industry (specific to transmission line, distribution line, and/or substation project work). \#LI-SB1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-NV-Reno_ **ID** _2025-4578_ **Category** _Applied Solutions & Program Management_ **Position Type** _Regular Full Time_ **Remote:** _No_ **Salary Range** _$60.00/Hour - $70.00/Hour_

As a Data Center Quality Inspector I, you provide superb quality control services for our clients. The work includes performing essential inspections of electrical equipment and systems, such as switchgear and substations. Detailed knowledge of mechanical and instrumentation is critical to conduct inspections and interpret electrical drawings and specifications. Attentively, you ensure the equipment and technicians around you comply with company and site safety requirements. You prepare detailed daily reports about your findings, including time tracking and special inspection reports. Diligently, you approve and submit important documents such as Lockout/Tagout (LOTO) requests, team reports, and time tracking reports. You take pride in assuring that our clients receive safely installed and functional equipment every time. If you are an analytical and detail-oriented individual who communicates effectively and prioritizes safety, this could be the position for you! Travel may be required. Responsibilities Ability to read and interpret electrical drawings and specifications. Prepare written documentation such as daily narratives (work reports), special inspection reports, and daily time tracking. Perform inspections of switchgear, standby generators, protective relays, and other electrical distribution components. Submit LOTO requests, review and approve team reports, and time tracking. Ensure compliance with all company and site safety requirements. Benefits Competitive pay, depending on experience. Medical, dental, vision, 401(k) with company match, among other benefits. Holidays and paid vacation time. Extensive learning and development opportunities. Requirements Requirements High school diploma or equivalent. Higher education degree preferred. Minimum of two years of experience inspecting, testing, commissioning, or operating electrical distribution systems. Commercial or naval nuclear experience is strongly desired. OSHA 10-hour Construction Safety training. Commitment to excellence and high standards.

Job Description CERTERRA (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR's Top 500 list alongside the nation's top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. JOB OVERVIEW: The Certerra - Black Eagle Consulting Special Inspector reports directly to the QC Project Manager and provides on-site construction inspection and testing per the project plans and specifications. Minimum Qualifications: A minimum of 3 years' construction experience Practical knowledge of the International Code Council (ICC) Chapter 17 Special Inspections and Tests Combination of certifications in ICC's and/or AWS-CWI and/or ASNT (UT-MT-PT) ▪ Occupational Safety and Health Administration. (OSHA), 10-Hour Certification. A current and valid driver's license that will allow insurance through the company insurance provider. Preferred Qualifications: ICC Reinforced Concrete ICC Structural Masonry ICC Spray Applied Fireproofing ICC Structural Welding ICC Structural Steel & Bolting ICC Prestressed Concrete AWS/CWI ASNT Level II (UT-MT-PT) Nuclear density gauge ACI Concrete Field-Testing Grade 1 Certification NAQTC Certification (sampling &density, aggregates, asphalt) Essential Skills: Exhibit excellent written and verbal communication skills. Exhibit excellent organizational skills. Ability to work independently and/or within Team environments. Duties and Responsibilities: Coordinate on a daily basis with the QC Project Manager Attend internal pre-construction kickoff meetings with Project Engineer, and QC Project Manager. Perform materials testing/inspection and provide proper documentation on a daily basis. We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

General Description: The QA/QC Inspector plans and conducts activities concerned with the quality assurance of industrial processes, materials, and products by performing the following duties. The QA/QC Inspector will represent ACCO and its subcontractors for pipe and equipment installation, welding inspection and oversight of subcontractor installation and quality. The QA/QC Inspector will participate in the General Contractors project quality program documenting installation activities. Supervises: None Essential Duties & Responsibilities Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of assigned product or component. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Reviews all purchased products or components and provides input to the decision of whether the product has been vetted by ACCO for future purchases from the vendor. Documents data obtained during all quality assurance activities, consistent with company policies, codes and procedures. Communicates significant issues or developments identified during quality assurance activities and provides recommended process improvements to management. Prepares reports to communicate involvement and results of quality assurance activities. Maintains a working knowledge of codes and specifications for current industry quality standards. The quality team may assign other duties. Secondary Duties / Responsibilities: Develops new approaches to solve problems identified during quality assurance activities. Prepares and presents technical information and reports to team members and management. Directs technical and administrative workers engaged in quality assurance activities. Other duties as assigned by the Site QC Supervisor or QA/QC Director in conjunction with the project team. Position Requirements (Skills, Work Experience, Education, Certifications, Licenses, etc.): To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Seeking at least 5 years of experience in Quality Control with a minimum of 3 years focused on ASME B31 piping codes, industrial and commercial construction, fabrication, welding, non-destructive testing, and/or other similar fields. Current certification in accordance with AWS QC-1 as a Certified Welding Inspector (CWI) and /or ICC Mechanical - Commercial Certification preferred. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Regular & routine attendance. ACCO Competencies: Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Insight: The ability to gather and make sense of information that suggests new possibilities. Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility and shows personal humility. Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change. Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. Physical Requirements: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds Specific vision abilities required by this job includes Jaeger (J1) vision annually. Regularly required to walk, climb stairs, sit, stoop, kneel, crouch, or crawl Hours: This is a non-exempt position from Monday through Friday, with one-hour break for lunch and two rest breaks. Travel: Based on business needs to and from the primary office to regional branch offices & job sites. Varying work in varying locations. #ACCO #LI-MM1

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR's Top 500 list alongside the nation's top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for ICC Special Inspectors in our Reno, NV office. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. The ideal candidate will have experience performing construction testing and inspection of soil, concrete, masonry, structural steel and/or spray-applied fireproofing. Essential Functions On site observations/inspections to confirm compliance with local building codes and project contract documents Collecting samples Performing specific QA/QC tests on construction materials and building components per ASTM, ACI, etc. standards Compiling detailed records of observations, inspections, and test results Work is generally performed unsupervised (i.e., employee is in the field as the Company's representative) but under the direction of a Professional Engineer or Project Manager. Desired Qualifications, Experience, and Education: • ICC certifications in at least one of the following areas - Soils, Structural Concrete, Post-Tension/ Reinforced Concrete, Masonry, Fireproofing • ACI Field Grade 1/ NAQTC • 2+ years' experience performing multi-discipline special inspections & tests • The ability to read and comprehend plans & specifications • Excellent communication skills (both oral and written) • Valid State driver's license with clean driving record We offer an excellent benefits package for full-time employees which includes medical, dental, vision, paid holidays, paid-time off, 401k, and more. We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job DescriptionElectrical QC Inspector Halo Technical Solutions Global is seeking a detail oriented and safety focused Electrical QC Inspector to join our growing team. The ideal candidate will ensure that all electrical installations and systems meet applicable codes, standards, and project specifications while maintaining the highest level of safety awareness on site. This role requires strong technical knowledge, the ability to interpret electrical drawings, and a proactive commitment to upholding both quality and safety across the job site. Key Responsibilities Conduct detailed inspections of electrical systems and installations on active construction sites. Review blueprints, schematics, and contract documents to verify compliance with design and specification requirements. Perform quality control checks on electrical components and systems, identifying and reporting defects or non-conformance. Record and analyze inspection data for project quality reporting and documentation. Collaborate closely with contractors and site teams to resolve discrepancies found during inspections. Ensure timely and accurate documentation of all inspections, findings, and corrective actions. Provide guidance and feedback on electrical best practices to uphold safety and compliance standards. Lead by example by actively promoting job site safety culture, ensuring all activities adhere to site specific safety plans, procedures, and regulations. Requirements Proven experience in construction inspection focused on electrical systems. Strong understanding of electrical codes, standards, and regulations (NEC, NFPA, and local codes). Proficient in reading and interpreting electrical blueprints and schematics. Demonstrated commitment to jobsite safety and self-awareness in all work activities. Safety is the foundation of this role. Familiarity with site safety procedures, PPE requirements, and lockout/tagout practices. Experience with construction quality control processes and documentation practices. Ability to effectively collect and analyze field data for quality reporting. Excellent communication and collaboration skills for coordination with contractors and field teams. Detail oriented with strong problem solving and analytical skills. Valid and current Journeyman Electrician License (required). OSHA 10 certification (required). NFPA 70E Electrical Safety certification (required). Employer Identification Number (EIN) (required prior to site mobilization). Certificate of Insurance (COI) (required prior to site mobilization). Note: An EIN and COI are required before mobilizing to the jobsite; however, if you don't already have these items, don't let that stop you from applying. We can guide you through the process and provide resources to help you get set up if you meet the qualifications for this role. Why Join Us At Halo Technical Solutions Global, we're a team of former field professionals who decided it was time to do things better. We've worked the jobs, worn the boots, and lived the job site life. Now, we've built a company that puts people first and never cuts corners when it comes to quality, safety, or respect. We take pride in supporting high performance construction teams across the country. Our 1099 contract structure gives you real freedom to manage your schedule, your goals, and your success without red tape or micromanagement. You bring the expertise, and we back you up every step of the way. If you're a qualified electrical professional who wants to work smarter, be valued, and raise the bar on some of the most exciting projects in the U.S., you'll fit right in with us. Compensation & Details Job Type: Full-Time (1099 Contract) - 60 hours per week Pay: $16,000 - $17,000 per month Work Location: Sparks, NV How to Apply Click Apply to submit your application and connect with our team. Qualified candidates will be contacted directly for next steps in the onboarding process. The interview will consist of a 30 minute virtual meeting via Teams with the HTSG management team followed by a 15 minute final interview with the site's QC manager. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

As an SMT QC Inspector at Rocket EMS, you will play a vital role in ensuring that our high-reliability PCB assemblies adhere to the strictest quality standards. Your responsibilities will include conducting first article inspections, performing in-process audits, and monitoring production quality along the SMT line. This position demands meticulous attention to detail, a solid understanding of IPC standards, and the decisiveness to halt production when quality is jeopardized. Responsibilities Review job documentation (MPI, Deviations, ECOs, and Customer Requirements) prior to inspection. Conduct SMT First Article Inspections and verify compliance with IPC-A-610 (Class 2 and 3) and customer standards. Monitor throughput and quality on assigned lines; halt production if significant defects are identified and escalate issues promptly. Provide daily quality pass-down reports and keep leads/supervisors informed about inspection outcomes. Initiate and review Technical Inquiries for discrepancies; ensure no jobs commence without proper authorization. Assist in addressing bottleneck areas as directed by Supervisor, Engineer, or Manager. Escalate unresolved issues to the Quality Manager. Adhere to and enforce all procedures related to ESD, MSD handling, housekeeping, maintenance, safety, and inspection protocols. Propose and support continuous process and quality improvements. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years in an electronics inspection role within a contract manufacturing or similar environment. IPC-A-610 and/or J-STD-001 certification (required). Skills Strong understanding of IPC workmanship standards (Class 2 and 3). Ability to read and interpret blueprints, drawings, and BOMs. Basic computer skills (MS Word, Excel, Outlook). Excellent communication skills in English, both written and verbal. Detail-oriented with the capability to accurately identify and classify defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Growth opportunities in a cutting-edge electronics manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed

Job Description Dassault Falcon Jet -Maintenance, Repair and Overhaul (MRO) facility in Reno, Nevada is seeking a full-time Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. Also, providing the approval for return to service with respect to the work performed for work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. Job Duties & Responsibilities: Responsible to Quality Assurance for quality and airworthiness and may report to Crew Chief for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, makes adjustments and repairs, replaces components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. Requirements Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 3 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment and tools used to perform aircraft maintenance and alterations. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills/ Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Compensation and Benefits The compensation for this position typically falls between $38 - $50 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime. This position may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs line clearances. Completes necessary documentation, such as production and quality Batch Production Record (BPR) information, associated current Good Manufacturing Practices (cGMP) forms, and daily activity reports. Reviews documentation (BPR, Machine Activity Logbooks (MAL), Laboratory Testing Worksheets, and other logs and inspection sheets) for accuracy and compliance with cGMPs and Standard Operating Procedures (SOP). Assists the MQ Samplers with sampling and the release of incoming materials in LIMS. Performs MQ Sampler duties as required (i.e. covers PTO, absences, business need). Completes rounds (real time line and documentation audit) throughout the shift. Performs allergen and Adenosine - 5 - Triphosphate (ATP) swabbing on equipment. Performs line inspection checks. Performs Acceptable Quality Limits (AQL) inspections. Performs preliminary investigations of the deviation and QC Hold process. Performs data entry, including LIMS entries and Oracle entries, including Oracle status changes. Performs daily internal audits to ensure compliance with GMPs and SOPs. Communicates problems/out of specification issues to supervisor/lead and operations personnel. Informed and held accountable for food safety and regulatory responsibilities. Identifies and immediately notifies management about actual or potential food safety issues. Resolves food safety issues within their scope of work. Complies with safety and GMP requirements. SAFETY RESPONSIBILITY STATEMENT Supports a culture of safe production and exhibits safe work practices. Actively participates in the safety program by engaging in safety activities. Effectively provides and accepts constructive peer-to-peer feedback on safety performance. Adheres to policies, procedures, SOP's, safe work practices, and safety policies and procedures. Reports ALL workplace incidents to supervisor immediately. Communicates concerns to supervisor, reports hazards, and provides input on prevention. Properly uses, wears, and stores Personal Protective Equipment when required. Participates on safety teams and/or completes safety-related activities as part of regular job responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school degree or equivalent and a minimum of 1-3 years quality related experience OR equivalent combination of experience and education. Degree in a science field helpful. Experience in quality processes, inspection, and GMP environment preferred. Basic computer skills with Word and Excel required. PERFORMANCE ABILITY Inspector I will be assigned to work in any area in which he/she has been trained based on the needs of the department on a given day. Performs routine tasks with limited decision making required. Interacts with production and audits production operations in real time. Assists with performing root cause analyses into issues and makes good decisions on corrective actions in a timely manner with some guidance when needed. Good technical writing skills to assist with holds and deviations . Demonstrated ability to consistently meet quality, safety and efficiency goals. Prioritizes and calmly handles multiple tasks simultaneously in a fast-paced environment; exhibits flexibility and willingness to change tasks frequently; and works in different areas as needed. Learns quickly, operates independently, and assumes responsibility for new tasks. Applies critical thinking skills to a variety of manufacturing issues and makes decisions to solve them. Good attention to detail skills required. Collaborates with others (including Production and the Lab); exhibits strong teamwork skills; and actively listens and communicates effectively with others. Demonstrates integrity and models NOW's core values. Consistently follows all company policies and procedures, including safety. LANGUAGE SKILLS Ability to read and interpret documents such as product specifications, departmental instructions, and procedure manuals. Ability to write routine e-mails to communicate within QC and with operations personnel. Accurately and truthfully completes documentation. Ability to use good technical writing skills to close deviations and holds as well as update quality documents. Good verbal communication and listening skills. MATHEMATICAL SKILLS Ability to apply concepts such as fractions, percentages, averages, ratios, proportions, and the metric system to practical situations. REASONING ABILITY Ability to compare results to specifications to determine if result meets requirements. Ability to interpret a variety of instructions. Good problem solving skills required. Ability to investigate situations and reasons to determine root cause. OTHER SKILLS AND ABILITIES Ability to work a flexible schedule, including off shifts and weekends. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear; stand and/or walk throughout the facility; ascend and/or descend stairs; forward bend and squat; use hands to inspect, handle, and feel; and reach with hands and arms. The employee is regularly required to enter information into a computer, handle product in various stages and forms (i.e. raw materials, work in progress, and finished products in liquid, powdered, and tablet forms), in addition to equipment and/or tools. The employee frequently is required to use his/her sense of smell. The employee must regularly lift, move (in some cases drag items), slide, raise and/or place: Lift up to 50 lbs. from 31 inches, carry for 5 feet and return to 31 inches. Lift up to 50 lbs. floor to waist height. Grasp up to 50 lbs. of force. Lift up to 50 lbs. and move box 10 inches to side, then back again at 36 inches. (MQ Sampler role only) WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Works around ingredients such as vitamins, minerals, amino acids, botanicals, etc. and chemicals such as alcohol, that may require respiratory protection. May be exposed to potentially hazardous chemicals and biological materials. Employee works near moving mechanical parts. Frequently exposed to vapors, airborne particles and/or herbal aromas, some classified as allergens or irritants. This position works in all areas of NOW's manufacturing facilities with direct exposure to ingredients (powders and liquids), mixes, (powders and liquids), equipment, and packaging. Frequently exposed to all of the FDA designated major food allergens (Milk, Eggs, Fish, Crustacean shellfish (e.g. crab, lobster, shrimp), Tree nuts (e.g., almonds, walnuts, pecans), Wheat and Soybeans, except for peanuts. As required, works in a loud area that requires hearing protection and other protective equipment to be worn. 2025 BENEFITS AT A GLANCE #hpnow

Are you diligent and passionate about maintaining high standards? We're looking for a dedicated Quality Inspector to take a hands-on role in ensuring the quality and reliability of our products. In this role, you will perform well inspections, conduct audits, troubleshoot quality issues, and help define procedures that drive continuous improvement. You'll report directly to the Quality Manager and collaborate closely with other leaders across the organization. If you're someone who takes initiative to solve problems, focuses on details, and is dedicated to excellence, we want to hear from you! **In this Role, Your Responsibilities Will Be:** + Perform inspection and testing on receiving parts + Perform in-process inspection audits in the manufacturing area + Generate nonconformance reports for parts that fail inspection + Work with Assembly Operators and Manufacturing Engineers to affirm process controls + Prepare, control, and maintain manufacturing and inspection documentation + Prepare customer document packages + Support the investigation of claims and root cause analysis, including, execution of corrective actions + Assist the Quality Manager in the training of other employees + Calibrate production and inspection gauges and maintain calibration record + Perform non-destructive testing on castings and welded fabrications + Maintain a 5S work environment + May perform other duties as assigned **Who You Are:** You show tremendous amount of initiative in tough situations; is exceptional at spotting and seizing opportunities. You Actively seeks input from pertinent sources to make timely and well-informed decisions. You are able to adjust communication content and style to meet the needs of diverse partners. You always keep the end in sight and put in extra effort to meet deadlines. You have an in-depth understanding of how businesses work and make money. **For This Role, You Will Need:** + High School Diploma or equivalent experience + Three to five years of inspection experience in a manufacturing environment + Hands on experience with engineering drawings and specifications + Ability to read and interpret diagrams and Bill of Materials (BOMs) + Familiarity with 5S methodology + Solid understanding and use of calibrated measuring devices (Calipers, Micrometers and Durometers) + Working knowledge of the Quality Management System (QMS) per ISO 9001-2015 **Preferred Qualifications that Set You Apart:** + Excellent problem-solving skills and documentation/procedural skills. + Ability to work in a team environment with fellow inspectors and other employees. + Ability to use Microsoft Office Suite and Adobe **Physical Job Requirements** + Stand up to eight hours per day + Ability to work in a seated or standing position **Our Culture & Commitment to You:** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values (************************************************************** ! **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25024321 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Job Description CERTERRA (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR's Top 500 list alongside the nation's top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. JOB OVERVIEW: The Certerra - Black Eagle Consulting Special Inspector reports directly to the QC Project Manager and provides on-site construction inspection and testing per the project plans and specifications. Minimum Qualifications: A minimum of 3 years' construction experience Practical knowledge of the International Code Council (ICC) Chapter 17 Special Inspections and Tests Combination of certifications in ICC's and/or AWS-CWI and/or ASNT (UT-MT-PT) ▪ Occupational Safety and Health Administration. (OSHA), 10-Hour Certification. A current and valid driver's license that will allow insurance through the company insurance provider. Preferred Qualifications: ICC Reinforced Concrete ICC Structural Masonry ICC Spray Applied Fireproofing ICC Structural Welding ICC Structural Steel & Bolting ICC Prestressed Concrete AWS/CWI ASNT Level II (UT-MT-PT) Nuclear density gauge ACI Concrete Field-Testing Grade 1 Certification NAQTC Certification (sampling &density, aggregates, asphalt) Essential Skills: Exhibit excellent written and verbal communication skills. Exhibit excellent organizational skills. Ability to work independently and/or within Team environments. Duties and Responsibilities: Coordinate on a daily basis with the QC Project Manager Attend internal pre-construction kickoff meetings with Project Engineer, and QC Project Manager. Perform materials testing/inspection and provide proper documentation on a daily basis. We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.