Inspector jobs in Rochester, NY - 108 jobs

Why Us? At Par Health, we believe great healthcare is built on getting the essentials right. We're looking for passionate, talented individuals who share our commitment to improving lives. With 4,000+ team members worldwide, we lead with pride and purpose-prioritizing quality and safety while fostering a culture of continuous improvement, accountability, and teamwork. Elevating the Essentials isn't just our tagline, it's the higher standard we live by every day. Summary Handles and inspects components and filled product in accordance with Current Good Manufacturing Practices, Operating Procedures and Safety Regulations Documents and communicates functions and duties necessary to complete the manufacture of products produced in the Sterile Filling Department. Key Accountabilities - key outcomes/deliverables, the major responsibilities, and % of time Accountability Responsibilities % of Time Operational Performs all tasks as outlined in Batch Cards, SOPs and Job Aids Effectively demonstrates the ability to perform on automated lines Inspects finished product as required Packs-off product into trays and cases. Requires lifting weights of up to 35 lbs. Operates equipment as defined within the labor grade Maintains a smooth flow of production and monitors equipment as assigned 90% Issues Communicates to PMO or Supervisor in a timely manner any equipment or process deviations Continuous Documentation Documents in a timely manner all tasks requiring written records as specified in GMP regulations 10% Compliance Performs all functions in accordance with cGMPs, Corporate regulations, SOPs, and all other relevant regulations and standards Effectively demonstrates and understands the SOPs and job aids pertinent to each task performed Continuous Other Performs other duties as assigned by supervision Continuous Total 100% Qualifications Education & Experience Minimal acceptable level of education, work experience and certifications required for the job High school Diploma or GED from recognized institution or organization Successful completion of certified in house qualification programs Knowledge Proficiency in a body of information required for the job e.g. knowledge of FDA regulations, GMP/GLP/GCP, Lean Manufacturing, Six-Sigma, etc. Page 2 of 2 Customer Focus - Results Driven - Leadership - Teamwork - Innovation and Continuous Improvement Endo Job Description Template - Revised July 2014 Skills & Abilities Often referred to as "competencies", leadership attributes, skills, abilities or behaviors that may be enterprise, functional or job specific e.g. coaching, negotiation, calibration, technical writing etc. Physical Requirements Physical & mental requirements e.g. lift 40 pounds, walk across plant/warehouse, business travel (% of time), driving as part of work responsibilities, etc. Required to reach with hands and arms and frequently required to use hands to finger, handle or feel. Occasionally lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision Frequently exposed to moving mechanical parts Frequently exposed to toxic or caustic chemicals The noise level is moderate Work environment is a production/manufacturing environment Disclaimer: The above statements are intended to describe the general nature and level of work performed by employees assigned EEO Statement: We comply with all applicable federal, state, and local laws prohibiting discrimination and harassment, and provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or genetic information, or any other classification protected by federal, state or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Full-time Description Please apply on our website *************** could also be a split shift @ 10am - 6:30pm for the right candidate This opening is for an experienced QA professional. Please have experience working in quality control in a manufacturing environment. Position Summary Performs basic receiving, first-piece, in-process and final inspection in accordance with applicable quality system procedures and work instructions. Evaluates materials, components and/or assemblies for conformance to specification requirements or established workmanship standards. Applies basic statistical techniques, including statistical process control and sampling plans, to assess the stability of various processes or reduce collected raw data. May train new or lower grade level employees in department protocol. Requirements Essential Duties and Responsibilities Perform receiving inspection of incoming supplies requiring quality assurance evaluation prior to dispatch using the appropriate sampling plan. Perform first-piece inspection of machined product and conduct in-process audits of work-in-progress in accordance with documented procedures under supervision. Perform final inspection and test of deliverable product in accordance with documented procedures prior to release for shipment or storage. Complete all required inspection and test records appropriate to the particular task and results of the inspection. Understand and apply basic geometric dimensioning and tolerancing symbology. Employ basic statistical tools to interpret data. Understand Vantage operation for time and data reporting. Perform other duties assigned by supervisor. Supervisory Responsibilities This position has no supervisory responsibilities. The Inspector II is required to interact effectively in cross-functional teams dedicated to the resolution of issues in a timely manner. Education, Training and/or Experience Associate's degree (AA) or equivalent from a two-year college or technical school; or one to three years related experience and/or training; or equivalent combination of education and experience. Benefits: Competitive Pay Medical effective on start date Dental Life Insurance (plus additional supplemental coverage) 401(k) program Short & Long Term Disability Profit Sharing Program Vacation Program Educational Financial Assistance Flexible Spending Accounts Health Savings Accounts And others! PGM is an EOE Employer Salary Description $20 to $25 per hour

Job DescriptionDescription: With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: Competitive Pay Competitive Health Insurance Paid training and certification with cash bonuses for successful completion Advancement career and opportunity planning Company vehicle for travel to project sites Paid Vacations/Sick/Personal/Holidays Safety training and equipment provided 401(k) Retirement Savings Plan with company match Certified Welding Inspector (CWI) Qualifications: Strong written and verbal communication skills Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations. Proficient in Microsoft Office Ability to work with AWS & AISC codes One or more of the following certifications is required: ICC Structural Steel and Bolting Special Inspector, ICC Structural Welding Special Inspector, AWS CWI, AWS CAWI, SSPC, AMPP or ASNT NDT Certified Welding Inspector (CWI) Responsibilities: Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State. Perform special inspections in accordance with the applicable building code requirements. Review project plans and specifications. Review and perform welding procedure and performance qualification testing. Routinely and effectively communicate with colleagues, contractors, and clients. ATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders. Requirements:

Discover Your Next Big Opportunity: See Why Quality Vision International Is the Place to Be! Schedule: Monday - Friday, 7:30am -4:00pm Compensation: $22.00-$28.00 based on experience The Mechanical Quality Inspector is responsible for interpreting blueprints form GD&T to guide their inspection of all materials mechanical in nature. This is a critical function as the first check point for supplier quality. Additionally, the Inspection department provides inspection services for the floor when there are questionable issues. The Mechanical Quality Control Inspector works with a high level of independence and contributes to inspections of incoming material that is mechanical in nature, received from both external and internal suppliers, formally rejected by assemblers, or returned from the field. Role and Responsibilities: · Reads blueprints to inspects incoming mechanical materials thoroughly. · Utilizes quality control processes, sampling systems, and procedures to ensure part conformance to specifications. · Ensures QVI incoming quality control product specifications and standards are achieved and maintained. · Maintains detailed and accurate record keeping practices. · Accepts or rejects parts that are purchased externally or manufactured within the corporation. · Works independently and provides guidance and mentorship as needed to Level I inspectors · Utilize CMMs, vision systems, calipers, micrometers, plug/thread gages, etc., as well as GD&T · Other related duties or tasks assigned by management. Those who have worked as a mechanical quality inspector, machinist, or in a role that involves mechanical design may do well in this role! Candidates who have quality experience with plate inspection and GD&T could be a fit for this role as well. Requirements · High School Diploma required. Associate's or bachelor's degree in a manufacturing or quality-related field preferred. · At least 2 years experience in a quality control environment specific to manufacturing and/or mechanical · At least 2 years experience in a machinist role preferred (helpful in this role along with the knowledge of GD&T!) · Working knowledge with machining practices and sheet metal components. · Ability to read mechanical drawings, sometimes often of a complex nature. · Advanced knowledge of part requirements with very close tolerances - Typical +/-.005mm (+/- .0002 inch.) and proficiency of both metric and English systems · Experience with Enterprise Resource Planning (ERP) systems preferred. · Familiarity with QVI/OGP products preferred. · Good written and verbal communication skills as well as effective interaction with team members and with other departments. · Commitment to being a team player with a flexible, positive, adaptive approach to resolving problems or changes. · Working understanding in computer software products such as: Microsoft Excel and Word. · Proficiency in the use of a CMM, Vision systems, calipers, micrometers, plug/thread gages, etc. · Working knowledge with machining practices and sheet metal components. · Working knowledge of GD&T. · Basic understanding of machining practices preferred. Physical and/or Environmental Requirements: · Ability to walk, stand, or sit for extended periods of time. · Ability to independently and safely move materials utilizing a pallet jack, work cart, etc. Visual acuity and manual hand dexterity are needed to operate said tools. · Ability to lift material up to 50 pounds as needed. · Ability to manually handle and transfer material parts to and from inspection operations. What We Offer Paid Time Off · 10 paid holidays each year · Over 3 weeks of PTO (vacation/sick/personal) to start, with additional time after 5 and 10 years Health & Financial Benefits · Health coverage where QVI pays 97-100% of premiums on our most affordable HDHP - free single coverage for employees! · Employer-paid Short-Term & Long-Term Disability Insurance · Employer-paid Life Insurance · QVI 401k Retirement Savings Plan: Up to 5% gross wages · Tuition Reimbursement: up to $7,000 annually · College Scholarship Programs for employee dependents · Annual discretionary bonuses (for non-commission roles) · $1,500 Employee Referral Bonus Wellness & Extras · Employee Assistance Program (EAP) & Wellness perks: on-site nurse, biometric screenings, chronic condition support, and cash incentives for healthy living programs and challenges · Free on-site electric vehicle charging stations and cash reimbursement toward the purchase of qualified EVs Quality Vision International Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Salary Description $22.00-$28.00 based on experience

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing services for concrete and asphalt at producer plants in accordance with established testing methods and standards. Responsibilities Test construction materials such as concrete and asphalt for quality control/quality assurance in material plants Read construction documents and specifications and correctly interpret test results Record and report test results in a clear, concise manner Complete each testing assignment accurately and in accordance with the appropriate standards Turn in field data records and completed reports for each project daily Communicate regularly with direct supervisor to provide updates on project details Complete continuing education and preparation for additional certifications Qualifications High School Diploma required Desirable Certifications for this position are ACI Grade 1 Concrete, NYCMA QC/QA Certification; CME will provide full support in obtaining these certifications if do not currently possess Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Familiarity with construction materials, procedures and documents a plus Must possess and maintain a valid driver's license Must possess reliable transportation and current/required automotive insurance coverage Compensation: $20 - 25/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Perform visual and dimensional inspection and check of product to determine conformance to quality requirements and standards relative to dimensions, contour, fill, finish, inspect position and other specifications. Essential Duties and Responsibilities Works from drawings, specifications, and inspection quality control instructions using an assortment of hand, floor, or bench mounted measuring tools, fixtures and equipment such as micrometers, Verniers, gauge pins, height gauges, comparators, gear checkers, etc. Performs visual and dimensional checks of in-process or finished products. Performs first piece inspection as assigned. Notifies Lead Operator and Production Supervisor of deviations and follows special departmental procedures towards rectification, identification and control of sub-standard products Prepares requisite reports, completes assorted departmental forms and maintains records. CMM run CMM after placing parts on fixture Containment of Non-Conformance product and associated Product ID Good documentation practices This indicates the general nature and level of work, duties and responsibilities expected of the incumbent. The incumbent may be asked to perform other duties as required. The job description may be changed if needed as determined by the Company. Qualifications Required Competencies, Skills and Experience Minimum of 2 years on the job inspection experience to acquire familiarity with methods, procedures, tools and equipment and to perform the work proficiently preferred Must have good decision making and problem-solving skills Excellent communication and organizational skills Ability to positively motivate others Must be self-motivated CMM/PC-DMIS experience a plus Education and Job Experience Requirements High school diploma or G.E.D. preferred Available for training, keeping education and background up to current industry standards through willingness to attend seminars, read periodicals and seek advance education Completion of Paulson Training, QMS and cGMP practices are required. Work Environment and Physical Demands Stand, walk, push, pull, reach overhead and bend to the floor. Exert 50 to 100 pounds of force occasionally Exert 25 to 50 pounds of force frequently Exert up to 10 to 20 pounds of force constantly to move objects High nose levels from operating machines Physical hazards from moving equipment and machine parts Breathing fumes, dust and mist The work environment and physical demands detailed above are representative of those encountered while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.

Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a detail-oriented Visual Inspector to ensure product quality through thorough visual examination and inspection processes. This role is crucial in maintaining our quality standards by identifying defects, documenting findings, and preventing non-conforming product from reaching customers. What We Offer * Competitive salary based on experience * Career development opportunities * Climate-controlled work environment * State-of-the-art machinery and equipment Benefits: * 401(k) * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Requirements Key Responsibilities: * Audit quality of production during all phases of manufacturing. * Perform first piece, in-progress, and final inspection of machined parts. * Perform Gage calibration and record keeping using Gage Track software. * Develop detailed in-process and final inspection reports. * Interpret various drawing specifications. * Work with both quality and manufacturing engineers to help develop processes. * Ensure documentation is completed in a timely manner, prior to deadlines and precise. * Familiarization with AS9100 and ISO9001:2000 standards Qualification Requirements: * High school diploma or GED Required; Trade/Vocational certificate in precision machining a plus! * 3+ years of experience within quality inspection in a manufacturing environment. Precision machining experience a plus! * Experience with quality control techniques and methods * Experience with standard measuring devices. * Ability to read blueprints and drawings including GDT. * Use inspection equipment efficiently. * Strong interpersonal and organizational skills. * Must be able to multitask while maintaining a high level of attention to detail. * Internal Auditing experience is a plus. Environment & Physical Demands: * While performing the duties of this job, the employee is regularly required to stand, walk, stoop, kneel, crouch, and talk and hear. * The job may involve prolonged periods of sitting and standing. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain). * Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. * The employee is frequently required to use the computer. * May involve the use of oils and solvents. * Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) * Generally, works in a clean environment and works to maintain the environment as such. * Safety Glasses are required and may require area specific safety training * This position works in a manufacturing environment. The noise level in the work environment is usually loud. * May work at different workstations as production needs require, or shifts from one station to another, during the production process.

Full-time Description Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a detail-oriented Visual Inspector to ensure product quality through thorough visual examination and inspection processes. This role is crucial in maintaining our quality standards by identifying defects, documenting findings, and preventing non-conforming product from reaching customers. What We Offer Competitive salary based on experience Career development opportunities Climate-controlled work environment State-of-the-art machinery and equipment Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Requirements Key Responsibilities: Audit quality of production during all phases of manufacturing. Perform first piece, in-progress, and final inspection of machined parts. Perform Gage calibration and record keeping using Gage Track software. Develop detailed in-process and final inspection reports. Interpret various drawing specifications. Work with both quality and manufacturing engineers to help develop processes. Ensure documentation is completed in a timely manner, prior to deadlines and precise. Familiarization with AS9100 and ISO9001:2000 standards Qualification Requirements: High school diploma or GED Required; Trade/Vocational certificate in precision machining a plus! 3+ years of experience within quality inspection in a manufacturing environment. Precision machining experience a plus! Experience with quality control techniques and methods Experience with standard measuring devices. Ability to read blueprints and drawings including GDT. Use inspection equipment efficiently. Strong interpersonal and organizational skills. Must be able to multitask while maintaining a high level of attention to detail. Internal Auditing experience is a plus. Environment & Physical Demands: While performing the duties of this job, the employee is regularly required to stand, walk, stoop, kneel, crouch, and talk and hear. The job may involve prolonged periods of sitting and standing. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain). Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. The employee is frequently required to use the computer. May involve the use of oils and solvents. Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) Generally, works in a clean environment and works to maintain the environment as such. Safety Glasses are required and may require area specific safety training This position works in a manufacturing environment. The noise level in the work environment is usually loud. May work at different workstations as production needs require, or shifts from one station to another, during the production process.

Team Members assigned to this classification are taught to inspect the castings produced at Rochester Metal Products. This position requires Team Members to use the Brinell Machine. Team Members use Process Cards that show in words and pictures the customer's specification for the casting and must ensure that the finished product meets those specs. Bilingual is plus. 2nd shift = $20.32 Note: This is NOT an all-inclusive list of job duties. Requirements Ability to read and understand work instructions. Ability to understand and follow all safety procedures and requirements. Ability to lift 30 lbs frequently; and, up to 50 lbs occasionally. Must have High School diploma or equivalent

We are seeking a highly motivated and skilled Quality Inspector to join our team! We are looking for individuals that performs final visual and simple mechanical inspection of sheet metal parts and assemblies for quality defects, appearance and finishes from specifications. Key Responsibilities: Follows all safety process and procedures in accordance with the job and Company policy. Understands and follows all quality procedures. May require supervision to help determine the best way to accomplish tasks in a timely and efficient manner. Interprets written procedures and drawing notes. Visually inspects piece per written sample procedure. May inspect and sort during manufacturing process (in-process sorts). Performs final inspection before product is shipped. Assists with other duties as assigned by supervisor/manager. Qualifications: Education High school diploma or general education degree (GED) required or equivalent combination of education and experience. Experience 1-2 years related experience or training. Hours: Full Time - 40 hours per week Monday - Friday Benefits: Competitive salary and benefits package. Opportunity to work in a dynamic and innovative environment. Professional growth and development opportunities. Collaborative and supportive work culture. Contact Us: Email: *********************** Call: ************ Equal Employment Opportunity: Our client is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

Full-time Description Job Title: Inspector NDE II Reports To: Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Technician Division/Department: GHM/Quality Level of Work: Level I The Inspector NDE II (RT) performs inspections with supervision and mentoring. Qualified to set up and calibrate equipment and interpret and evaluate results as per applicable codes, standards, and specifications. Should be familiar with technique limitations. Organize and report the results. Should exercise assigned responsibility for on-the-job training and guidance of trainees and Level I personnel. Inspects components, assemblies, and related paperwork to ensure compliance with contract specifications. Ensures that no non-conforming or rejected product gets shipped to the end user or customer. Focused on providing the highest quality products to customers. Second shift position. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed Utilize the drawings and specifications to develop a plan for basic manual inspections. Evaluate parts to ensure that they meet the specified requirements per the inspection plans. Complete the inspection step on the router to properly indicate pass/fail and note the time to ensure the inspection results are traceability to the appropriate inspector Knowledge of proper inspection techniques required to obtain accurate results. Perform dimensional inspection on precision machined products and assemblies unassisted. Follow instructions - oral and/or written Can properly read all blueprint and work instructions Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. Performs other duties as assigned by the Quality Control Supervisor or his/her designate. Safety & House-keeping Work may require use of scaffold, ladders, forklift, and/or scissor lift. Maintains a clean work area with no clutter. Practices safety at all times while at work. Follows safety policies and procedures and speaks up when others are non-compliant. Wears all safety equipment for area of work. Continual Improvement suggestions Keeps an open mind to others continuous improvement suggestions Bring continuous improvement suggestions to the appropriate team member. Professional Development Demonstrates initiative, positive attitude, and enthusiasm for the job Will follow up with supervisor on professional development goals and opportunities Takes an interest and lets it be known that they have a desire to grow with the company Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training Technical Trades School in Welding or Inspection High school diploma or GED NDT Level II Certification in RT per ASNT SNT-TC-1A Experience: NDT Experience in RT with required hours (840). NDT Training with required hours (80). NDT Experience in total hours (1600). Hours can be verified and recorded per ASNT SNT-TC-1A. Other: Must be willing to work overtime as required. Local travel may be required. Second shift position Skills: To perform the job successfully, an individual should demonstrate the following competencies: Must have proficiency in MS office applications including spreadsheet, enterprise resource planning, database, and specialized application software. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. Strong written and verbal communication skills required. Strong organization and time management skills. High attention to detail. Demonstrate behavior consistent with company values. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment. Experience reading technical drawings desired with a drive to be detail oriented and willingness to learn specification requirements. Have basic knowledge of GD&T principal and working knowledge of a variety of machining processes. Physical and Mental Demands: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. · Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. · Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. This job description is not all inclusive but rather serves as a general guideline of the current needs of the position and can be modified at the discretion of management to meet current business needs. Experience and education requirements are the primary basis for awarding this position, however substitutions that are essentially equivalent may be made as they relate to the essential functions, duties, and responsibilities of this position Salary Description $25-$39/hour

Sims Metal (Sims) is a global leader in metal recycling. With facilities across the globe, Sims plays an intrinsic role in the circular economy by making resources available for future use. As a responsible corporate citizen, we continuously seek new ways to broaden our participation in the environmental sector, ensuring that our future is as bright, safe, and secure as at any time in our long history. Job Summary: The Ferrous Materials Inspector is responsible for inspecting incoming ferrous materials to ensure they meet company specifications and quality standards. This role also involves purchasing compliant materials and maintaining accurate documentation. The ideal candidate will be detail-oriented, safety-conscious, and capable of operating in a fast-paced environment. Key Responsibilities: * Ensure a safe working environment by following all company safety policies and procedures. * Examine customer-delivered ferrous materials to identify the appropriate commodity classification. * Determine the purchase category and approve or reject materials based on established specifications. * Utilize a computer kiosk to input purchases and process transactions. * Inspect materials to confirm compliance with internal quality control standards and applicable regulations. * Apply approval or rejection markings as needed and document inspection findings in detailed reports. * Perform other duties as assigned by management. Qualifications: * High school diploma or General Education Development (GED) certificate required. * 1-3 months of relevant experience or training, or an equivalent combination of education and experience. * Ability to read, speak, and understand English; Spanish language skills are a plus but not required. * Basic computer proficiency and the ability to learn internal systems. * Strong attention to detail and the ability to make sound decisions based on inspection criteria. Physical Requirements: The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. * Regularly required to stand, walk, and use hands to handle or feel materials. * Frequently required to reach, climb, balance, talk, and hear. * Must frequently stoop, kneel, crouch, or crawl. * Must regularly lift and/or move up to 25 pounds, frequently up to 50 pounds, and occasionally up to 100 pounds. * Specific vision requirements include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. A career with Sims provides you with the opportunity to work with an organization whose goal is to be the world's safest and most responsible recycling company. Our people achieve this by creating a zero-harm workplace, being exemplary members of the communities in which we operate, and being responsible stewards of the environment. We also offer competitive pay and a range of attractive benefits. Sims is proud to be an equal opportunity employer. We value the diversity of all of our employees and are committed to creating an inclusive working environment where everyone can contribute, advance on merit, and realize their full potential. Sims does not discriminate with regard to race, sex, religion, color, national origin, citizenship status, disability, age, marital or familial status, sexual orientation, gender identity, gender expression, veteran status, housing status, source of income, or any other status protected by federal, state, or local laws. This applies to any employment decision, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. qualified applicants with a disability in need of a reasonable accommodation may request such without fear of reprisal or discrimination. To achieve our purpose to create a world without waste to preserve our planet, we are guided by our Principles of Purpose: Be Safe + Well, Band Together, Be Accountable + Transparent, Consistently Innovate, Inspire with Purpose, Celebrate + Have Fun. ALREADY AN EMPLOYEE? Please apply through our Internal Career Site: Click here Why Choose A Career with Sims? Sims is a hub of innovation, offering employees the chance to explore new ideas and technologies while providing ample opportunities for personal and professional growth. With a diverse workforce, Sims fosters a sense of belonging and inclusion where employees can thrive and establish lasting connections. Working at Sims offers the chance to engage with a global network, providing opportunities for travel, cross-cultural experiences, and the ability to contribute to a sustainable future. Sims is renowned as one of the world's leading sustainable companies, empowering employees to make a difference in creating a world without waste to preserve the planet. Sims prioritizes employee wellbeing, offering superior benefits packages, meaningful training opportunities, and a supportive atmosphere where employees feel valued and heard at all levels of the organization. Sims maintains a strong focus on safety, where individuals are encouraged to challenge themselves, contribute, and support one another, in a collaborative team environment.

The quality control inspector performs calibration and inspection of parts, assemblies, products and/or materials for quality, defects, appearance, finishes, variance, and operation through specification or by visual comparison methods. The quality control inspector will be responsible for the documentation of all variable and attribute results, will assist in the development of standardized work instructions / procedures in accordance with our Quality Management System. This role will be actively engaged in many levels of the organization and must be an excellent communicator and educator of GD&T and calibration techniques. To be successful in this position: Perform calibration of variable and attribute gages to high level accuracy compliant with ISO standards Maintain calibration reports and procedures Use and maintenance of gage tracking software Understand and apply geometric dimensioning and tolerancing (GD&T) and basic trigonometry Experience with understanding engineering models, work instructions and specifications Can inspect component conformance using precision gauges, micrometers and other measuring instruments Have good problem solving and troubleshooting Be collaborative and team oriented Be organized, systematic and detail oriented Can learn from others and follow explicit instruction Have a high level of accountability and pride in your work Preferred Education / Training / Experience: Associate degree or equivalent technical school and/or minimum 3 years' experience and/or training Training in quality disciplines and metrology is preferred Combination of education and experience considered Experienced with GD&T ASQ certification for mechanical inspection/calibration a plus Computer Skills: Microsoft Office (Word, Excel, PowerPoint) Outlook SAP a plus Travel Requirements: No travel required

Performs final visual and simple mechanical inspection of sheet metal parts and assemblies for quality defects, appearance and finishes from specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Follows all safety process and procedures in accordance with the job and Company policy. Understands and follows all quality procedures. May require supervision to help determine the best way to accomplish tasks in a timely and efficient manner. Interprets written procedures and drawing notes. Visually inspects piece per written sample procedure. May inspect and sort during manufacturing process (in-process sorts). Performs final inspection before product is shipped. Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements Education High school diploma or general education degree (GED) Required or equivalent combination of education and experience. Experience 1-2 years related experience or training Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, and Internet Explorer. Other Requirements: Understanding and utilization of micrometers, verniers and scales (rulers). Ability to read and interpret blueprints. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit; maneuver through the office and factory; use hands to finger, handle, or feel and lift and/or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to wet and/or humid conditions; extreme heat; and extreme cold and the noise level in the work environment is usually loud. Salary Description $19.17 - $22.00 hour

Direct Hire Beyond TalentEdge has partnered with a global leader in the design and manufacture of engineered solutions in search of a Quality Control Inspector to join their team. This role is Direct hire; we invite you to apply today! Responsibilities: Ability to use inspection gauging and equipment to ensure conformance to all visual and dimensional drawing requirements. Gauging includes but not limited to; calipers, micrometers bore mics, depth, pin, thread and snap gauging. Operate equipment such as profilometer, optical comparator, height gauge, microscope, smart scope and CMM. Perform incoming and receiving inspection to specified requirements. Perform inspection of finished details and assemblies to specified requirements. Performs Statistical Process Control (SPC) analysis. Enter inspection results into a variety of data collection tools and databases. Inspection of welded and brazed assemblies. Candidate requires internal certification of weld inspection. Keep accurate records and maintain quality documentation. Perform inventory movement transactions in the ERP system and ensure traceability of product. Understand the non-conforming material process to ensure control of material. Work and communicate with Quality, Supplier Quality, Engineering, and Manufacturing in a clear professional manner. Write clear material rejection reports that contain problem statements, dimensions, and data. Retrieve test data from databases and assemble documentation packages to ship with the product. Proficient in multiple customer websites and requirements in order to assemble documents and perform DSQR (customer delegated source inspection). Use Syteline (ERP System) in order to retrieve quality requirements and perform tasks related to moving product in system. Understand the return material process in order to assemble parts and documentation for eventual shipment back to the customer. Perform tasks as assigned by the Inspection department Supervisor or Quality Manager Requirement Qualifications: Minimum education is High School Diploma Associates or higher in Technical Discipline/Trade preferred Minimum 3 years in a precision manufacturing or machining environment Basic Statistical Process Control and Statistical Fundamentals Minimum 3 years in a precision manufacturing or machining environment Experience with computer software like; Statistical Software, Access, advanced Excel Experience in writing programs in Calypso Salary & Schedule: $20-25 an hour or more depending on experience Schedule: Monday- Friday 8am- 5:00pm Benefits: PTO, Holiday, 401k “Beyond TalentEdge is an Equal Opportunity Employer. It is the policy of Beyond TalentEdge to provide equal opportunity in employment and conditions of employment to all individuals regardless of age, race, color, religious beliefs, national origin, sexual orientation, gender identity, sex, veteran or military status, disability, pregnancy-related condition,predisposing genetic characteristics, genetic information, marital status, familial status, prior arrest, domestic violence victim status, non-job related convictions, participation in lawful activities outside of our workplace, or any other status protected by law.”

Job Title: Inspector NDE II Reports To: Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Technician Division/Department: GHM/Quality Level of Work: Level I The Inspector NDE II (RT) performs inspections with supervision and mentoring. Qualified to set up and calibrate equipment and interpret and evaluate results as per applicable codes, standards, and specifications. Should be familiar with technique limitations. Organize and report the results. Should exercise assigned responsibility for on-the-job training and guidance of trainees and Level I personnel. Inspects components, assemblies, and related paperwork to ensure compliance with contract specifications. Ensures that no non-conforming or rejected product gets shipped to the end user or customer. Focused on providing the highest quality products to customers. Second shift position. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed * Utilize the drawings and specifications to develop a plan for basic manual inspections. * Evaluate parts to ensure that they meet the specified requirements per the inspection plans. * Complete the inspection step on the router to properly indicate pass/fail and note the time to ensure the inspection results are traceability to the appropriate inspector * Knowledge of proper inspection techniques required to obtain accurate results. * Perform dimensional inspection on precision machined products and assemblies unassisted. Follow instructions - oral and/or written * Can properly read all blueprint and work instructions * Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. * Performs other duties as assigned by the Quality Control Supervisor or his/her designate. Safety & House-keeping * Work may require use of scaffold, ladders, forklift, and/or scissor lift. * Maintains a clean work area with no clutter. * Practices safety at all times while at work. * Follows safety policies and procedures and speaks up when others are non-compliant. * Wears all safety equipment for area of work. Continual Improvement suggestions * Keeps an open mind to others continuous improvement suggestions * Bring continuous improvement suggestions to the appropriate team member. Professional Development * Demonstrates initiative, positive attitude, and enthusiasm for the job * Will follow up with supervisor on professional development goals and opportunities * Takes an interest and lets it be known that they have a desire to grow with the company Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training * Technical Trades School in Welding or Inspection * High school diploma or GED * NDT Level II Certification in RT per ASNT SNT-TC-1A Experience: * NDT Experience in RT with required hours (840). * NDT Training with required hours (80). * NDT Experience in total hours (1600). * Hours can be verified and recorded per ASNT SNT-TC-1A. Other: * Must be willing to work overtime as required. * Local travel may be required. * Second shift position Skills: To perform the job successfully, an individual should demonstrate the following competencies: * Must have proficiency in MS office applications including spreadsheet, enterprise resource planning, database, and specialized application software. * Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. * Strong written and verbal communication skills required. * Strong organization and time management skills. * High attention to detail. * Demonstrate behavior consistent with company values. * Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. * Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment. * Experience reading technical drawings desired with a drive to be detail oriented and willingness to learn specification requirements. * Have basic knowledge of GD&T principal and working knowledge of a variety of machining processes. Physical and Mental Demands: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. This job description is not all inclusive but rather serves as a general guideline of the current needs of the position and can be modified at the discretion of management to meet current business needs. Experience and education requirements are the primary basis for awarding this position, however substitutions that are essentially equivalent may be made as they relate to the essential functions, duties, and responsibilities of this position Salary Description $25-$39/hour

Job DescriptionDescription: Please apply on our website *************** could also be a split shift @ 10am - 6:30pm for the right candidate This opening is for an experienced QA professional. Please have experience working in quality control in a manufacturing environment. Position Summary Performs basic receiving, first-piece, in-process and final inspection in accordance with applicable quality system procedures and work instructions. Evaluates materials, components and/or assemblies for conformance to specification requirements or established workmanship standards. Applies basic statistical techniques, including statistical process control and sampling plans, to assess the stability of various processes or reduce collected raw data. May train new or lower grade level employees in department protocol. Requirements: Essential Duties and Responsibilities Perform receiving inspection of incoming supplies requiring quality assurance evaluation prior to dispatch using the appropriate sampling plan. Perform first-piece inspection of machined product and conduct in-process audits of work-in-progress in accordance with documented procedures under supervision. Perform final inspection and test of deliverable product in accordance with documented procedures prior to release for shipment or storage. Complete all required inspection and test records appropriate to the particular task and results of the inspection. Understand and apply basic geometric dimensioning and tolerancing symbology. Employ basic statistical tools to interpret data. Understand Vantage operation for time and data reporting. Perform other duties assigned by supervisor. Supervisory Responsibilities This position has no supervisory responsibilities. The Inspector II is required to interact effectively in cross-functional teams dedicated to the resolution of issues in a timely manner. Education, Training and/or Experience Associate's degree (AA) or equivalent from a two-year college or technical school; or one to three years related experience and/or training; or equivalent combination of education and experience. Benefits: Competitive Pay Medical effective on start date Dental Life Insurance (plus additional supplemental coverage) 401(k) program Short & Long Term Disability Profit Sharing Program Vacation Program Educational Financial Assistance Flexible Spending Accounts Health Savings Accounts And others! PGM is an EOE Employer

Team Members assigned to this classification are taught to inspect the castings produced at Rochester Metal Products. This position requires Team Members to use the Brinell Machine. Team Members use Process Cards that show in words and pictures the customer's specification for the casting and must ensure that the finished product meets those specs. 1st shift = $19.65 Note: This is NOT an all-inclusive list of job duties. Requirements Ability to read and understand work instructions. Ability to understand and follow all safety procedures and requirements. Ability to lift 30 lbs frequently; and, up to 50 lbs occasionally. Must have High School diploma or equivalent

The quality control inspector performs inspection of parts, assemblies, products and/or materials for quality, defects, appearance, finishes, variance, and operation through specification or by visual comparison methods. The quality control inspector will be responsible for the documentation of all variable and attribute results, will assist in the development of standardized work instructions / procedures in accordance with our Quality Management System. This role will be actively engaged in many levels of the organization and must be an excellent communicator and educator of GD&T and proper inspection techniques. To be successful in this position: Perform large and small part inspection on CMM with Calypso software Perform gear geometry measurement with metrology equipment Perform compliance verifications of incoming supplier materials Maintain inspection reports and procedures Understand and apply geometric dimensioning and tolerancing (GD&T) Experience with reading and understanding engineering drawings, models, work instructions and specifications Can verify component conformance using precision gauges, micrometers and other measuring instruments Have good problem solving and troubleshooting Be collaborative and team oriented Be organized, systematic and detail oriented Can learn from others and follow explicit instruction Have a high level of accountability and pride in your work Preferred Education / Training / Experience: Associate degree or equivalent technical school and/or minimum 3 years' experience and/or training Training in quality disciplines and metrology is preferred Combination of education and experience considered Experience operating a CMM Experienced with GD&T Computer Skills: Calypso (or other CMM programming software) Microsoft Office (Word, Excel, PowerPoint) Outlook SAP a plus Travel Requirements: No travel required