Inspector jobs in Rockledge, FL - 194 jobs

Department:Utility Services Department Organizational Unit:County Water and Wastewater Position Type:Permanent Full Time/Part Time:Full Time Open Until Filled. $23.86 to $26.25 hourly. Actual salary negotiable based on experience and qualifications. Government Center/Viera/Travels Countywide. Work schedule is Monday through Friday 7:00 a.m. to 3:30 p.m. and may include evenings, weekends, and holidays as necessary. Performs experienced technical work inspecting utility construction projects to observe and document whether contractors perform all work in accordance with the Department Criteria, the approved project drawings, and the specifications. REQUIREMENTS: Two (2) years [60 semester or 90 quarter hours] of college-level credit with major coursework in Construction Management, or a closely related field PLUS three (3) years of utility construction experience; OR High school diploma or its equivalent, as required by the Florida Department of Environmental Protection (FDEP), PLUS five (5) years of field experience in utility construction, maintenance, and/or inspection work. Additional qualifying education and/or experience may be substituted on a year for year basis. SPECIAL REQUIREMENTS: Must possess, or obtain prior to employment, a valid Florida driver's license and maintain said license during the term of employment. Must possess, or obtain within six (6) months of employment, a current Florida Department of Transportation (FDOT) Intermediate Maintenance of Traffic (MOT)/Temporary Traffic Control (TTC) certification, and maintain said certification during the term of employment. Must be able to work planned and unplanned overtime, including evenings, weekends, and holidays as needed. Must complete all of the Brevard County Mandatory Training for the Development of New Employees classes within nine (9) months of employment. In the event of a hurricane, major storm, man-made or natural disaster that may threaten the area, the employee will be required to perform emergency duties as directed. PHYSICAL REQUIREMENTS CHECKLIST (With or without reasonable accommodations) PHYSICAL ACTIVITIES / TRAITS The employee must be able to: LIFT:30 lbs. CARRY:30 lbs. PUSH:30 lbs. PULL:30 lbs. In an eight hour day, the employee may have to: STAND:5 - 8 hours WALK:5 - 8 hours SIT:5 - 8 hours DRIVE:5 - 8 hours The employee must repetitively perform: Fine manipulation (ex. writing, wiring); Operating foot controls; Pulling; Pushing; Simple grasping (ex. pen, screwdriver) The employee must be able to: Balance; Bend; Climb; Crawl; Dig; Jump; Kneel; Reach; Run; Smell; Stoop The employee must have: Color Perception; Good distant vision; Good hearing; Good near vision; Good speech; Other; Use of both eyes Other necessary physical activities/traits N/A WORKING CONDITIONS Working conditionsthat will apply to the employee: At heights above/below ground level; Below ground level (ditches, tunnels, etc.; In cold; In dampness or chilly conditions; In heat; In high humidity; In or with dusty conditions; In or with moving objects or vehicles; In or with noisy conditions; On or with ladders or scaffolding; On slippery or uneven walking surfaces; Other working conditions; With chemicals or solvents; With electricity; With feet, legs or hands in water; With fumes, smoke, gases or flames; With grease; With hazardous materials; With lawn grasses, plants, etc.; With odors; With oils; With poor lighting; With poor ventilation; With silica, fiberglass, etc.; With vibrations (jackhammers, etc.); Work alone; Work inside; Work outside; Works Closely with Others Other working conditions: N/A

arrow_back Return to Employment Opportunities STORMWATER INSPECTOR Apply Stormwater Inspector General Statement of Job Under occasional supervision, inspects private and public right-of-way or easement and site developments as well as other locations to ensure compliance with legal regulations and compliance to our Stormwater permit and general NPDES, FEMA flood plain and SFWMD regulations. Assists the Stormwater Engineering Division in compliance of these and other stormwater related permit requirements, projects and programs. Receives and responds to public inquiries, concerns and complaints pertaining to stormwater compliance, projects and permits. Performs related technical and administrative work as required. Reports to the Floodplain Manager. Essential Job Functions: Works in the field to ensure all sites within the City meet all federal, state and local stormwater requirements and issue violations if needed. Coordinates/meets with office, contractor, property owners, and permitting agencies to ensure all permitting requirements are met. Interprets project plans and specifications, permits and agreements to ensure that pre, during and post construction complies with our stormwater regulations. Establishes and maintains accurate and up-to-date compliance records; prepares required reports including required NPDES documentation, SFWMD permits, FEMA forms, etc. Ensures that all reports and required records are complete and in compliance with current regulations. Assists with generating and processing some minor stormwater related capital projects including design, permitting and inspection. Receives and responds to inquiries, concerns and complaints from City employees, agencies, and the general public regarding department activities, permits and projects. Performs administrative/office duties as required, including attending meetings, preparing reports and correspondence, entering computer data, copying and filing documents, etc. Operates a motor vehicle and a variety of equipment such as a computer, calculator, cell phone, scales, measuring devices, hand tools, etc. Interacts and communicates with various groups and individuals such as the supervisor, other division supervisors and staff, other City employees, property owners, engineers, architects, contractors, consultants, sales representatives, and the general public. Uses surveying equipment or other provided equipment and tools Floo site inspections as needed. Facilitates Public Education and Outreach for those with NPDES violations. ADDITIONAL JOB FUNCTIONS Performs related duties as required. Minimum Education and Training Requires a High School Diploma or GED and two to three years of experience in a related field or an equivalent combination of education, training and experience that provides the required knowledge, skills and abilities. Must possess and maintain a valid state of Florida driver's license. Must possess or obtain the most current FEMA 100, 200, and 700 Incident Command System certifications within 6 months of appointment to the job. Minimum Qualifications and Standards Required Schedule: Position requires at least 40 hours per week and may require working a rotating schedule. Physical Requirements: Must be physically able to operate a motor vehicle and a variety of equipment such as a computer, calculator, cell phone, scales, measuring devices, survey equipment, hand tools, etc. Must be able to exert up to 50 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Sedentary work involves sitting most of the time, but may involve walking or standing for periods of time. Must be able to lift and/or carry weights of up to 50 pounds. Data Conception: Requires the ability to compare and/or judge the readily observable functional, structural or compositional characteristics (whether similar to or divergent from obvious standards) of data, people or things. Interpersonal Communications: Requires the ability of speaking and/or signaling people to convey or exchange information. Includes receiving assignments and/or direction from supervisor. Language Ability: Requires ability to read a variety of policies and procedures, statutes, federal regulations, insurance documentation, etc. Requires the ability to prepare reports, employee records, insurance forms, correspondence, etc., with proper format, punctuation, spelling and grammar, using all parts of speech. Requires the ability to speak with and before others with poise, voice control and confidence. Intelligence: Requires the ability to apply rational systems to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists; to interpret a variety of instructions furnished in written, oral, diagrammatic or schedule form. Requires the ability to learn and understand relatively complex principles and techniques; to make independent judgments in absence of supervision; to acquire knowledge of topics related to primary occupation. Must have the ability to comprehend and interpret received information. Verbal Aptitude: Requires the ability to record and deliver information, to explain procedures, to follow verbal and written instructions. Must be able to communicate effectively and efficiently in a variety of technical and/or professional languages including personnel management, labor law, benefits administration, recruitment, etc. Numerical Aptitude: Requires the ability to add and subtract totals, to multiply and divide, to utilize mathematical formulas, to determine percentages and decimals and to determine time. Must be able to use practical applications of fractions, percentages, ratio and proportion. Form/Spatial Aptitude: Requires the ability to inspect items for proper length, width and shape, and visually read various information. Motor Coordination: Requires the ability to coordinate hands and eyes using office machinery. Manual Dexterity: Requires the ability to handle a variety of items, keyboards, office equipment, control knobs, buttons, switches, catches, etc. Must have minimal levels of eye/hand/foot coordination. Color Discrimination: Does not require the ability to differentiate colors and shades of color. Interpersonal Temperament: Requires the ability to deal with people beyond giving and receiving instructions. Must be adaptable to performing under stress when confronted with emergency situations or tight deadlines. Physical Communications: Requires the ability to talk and/or hear: (talking: expressing or exchanging ideas by means of spoken words; hearing: perceiving nature of sounds by ear). PERFORMANCE INDICATORS Knowledge of Job: Is knowledgeable in the laws, ordinances, standards and regulations pertaining to the specific duties and responsibilities of the position. Has knowledge in the areas of Stormwater utilities. Is able to make sound, educated decisions. Has the ability to plan and develop daily, short- and long-term goals related to Authority purposes. Has the ability to offer instruction and advice to co-workers regarding Authority policies, methods and regulations. Has the ability to offer assistance to co-workers and employees of other departments as required. Is able to take the initiative to complete the duties of the position without the need of direct supervision. Has the ability to learn and utilize new skills and information to improve job performance and efficiency. Is able to read and interpret complex materials pertaining to the responsibilities of the job. Is able to assemble and analyze information and make written reports and records in a concise, clear and effective manner. Has thorough knowledge of the terminology used within the department. Has the ability to communicate professionally in confrontational situations. Knows how to make public presentations. Has thorough knowledge of proper English usage, vocabulary, spelling and basic mathematics. Has thorough knowledge of modern office practices and technology. Has knowledge of and skill in the use of computers for data and word processing. Has knowledge of applicable occupational hazards and safety precautions. Knows how to react calmly and quickly in emergency situations. Quality of Work: Maintains high standards of accuracy in exercising duties and responsibilities. Exercises immediate remedial action to correct any quality deficiencies that occur in areas of responsibility. Maintains high quality communication and interaction with internal and external entities with whom the position interacts. Quantity of Work: Performs described Essential Functions and related assignments efficiently and effectively in order to produce quantity of work which consistently meets established standards and expectations. Dependability: Assumes responsibility for completing assigned work. Completes assigned work within deadlines in accordance with directives, policy, standards and prescribed procedures. Maintains accountability for assigned responsibilities in the technical, human and conceptual areas. Attendance: Attends and remains at work regularly and adheres to policies and procedures regarding absenteeism and tardiness. Provides adequate notice to higher management with respect to vacation time and leave requests. Initiative and Enthusiasm: Maintains an enthusiastic, self-reliant and self-starting approach to meet job responsibilities and accountabilities. Strives to anticipate work to be accomplished, and initiates proper and acceptable action for the completion of work with a minimum of supervision and instruction. Judgment: Exercises analytical judgment in areas of responsibility. Identifies issues or situations as they occur and specifies decision objectives. Identifies or assists in identifying alternative solutions to issues or situations. Implements decisions in accordance with prescribed and effective policies and procedures and with a minimum of errors. Seeks expert or experienced advice where appropriate and researches issues, situations and alternatives before exercising judgment. Cooperation: Accepts supervisory instruction and direction and strives to meet the goals and objectives of same. Questions such instruction and direction when clarification of results or consequences are justified, i.e., poor communications, variance with established policies or procedures, etc. Offers suggestions and recommendations to encourage and improve cooperation intra- and inter-departmentally. Relationships with Others: Shares knowledge with managers, supervisors and co-workers for mutual benefit. Contributes to maintaining high morale among all employees. Develops and maintains cooperative and courteous relationships inter- and intra-departmentally, and with external entities with whom the position interacts. Tactfully and effectively handles requests, suggestions and complaints in order to establish and maintain good will. Emphasizes the importance of maintaining a positive image. Coordination of Work: Plans and organizes daily work routine. Establishes priorities for the completion of work in accordance with sound time-management methodology. Avoids duplication of effort. Estimates expected time of completion of work elements and establishes a personal schedule accordingly. Attends required meetings, planning sessions and discussions on time. Implements work activity in accordance with priorities and estimated schedules. Safety and Housekeeping: Adheres to all established safety and housekeeping standards. Ensures such standards are not violated. Type : INTERNAL & EXTERNAL Posting Start : 01/24/2025 Posting End : 12/31/9999 MINIMUM HOURLY RATE: $22.70 share

Job Description Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Must be able to climb and lift up to 50lbs. Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************

RK&K is currently hiring a Roadway Inspector to join our Construction, Engineering, and Inspection (CEI) team in Orlando Florida. This position is in our Construction Management group which oversee the contractor's operations on roadway and bridge construction projects. Essential Functions Assisting the Project Administrator or Senior Inspector in daily roadway inspection Ensuring contractor compliance alongside quality control Performing verification inspections and testing as required These tests and inspections include, but are not limited to: earthwork, asphalt, concrete, bridge and miscellaneous structures, toll facilities, lighting, signalization, environmental compliance, maintenance of traffic, etc. This position receives general supervision and instruction from the Senior Inspector and/or Project Administrator Required Skills and Experience High school graduate or equivalent plus two (2) years' experience in roadway construction inspection, one (1) year of which shall have been in roadway construction inspection Must have the following as required by the scope of work for the project: CTQP Concrete Field Inspector Level I CTQP Asphalt Roadway Level I CTQP Earthwork Construction Inspection Level I Preferred Skills and Experience BS in Civil Engineering from an accredited institution Previous roadway inspection experience Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Job Description The Quality Control Inspector is responsible for identifying, managing, and documenting events, discrepancies associated with either product or process as well as managing, writing any investigations that may be a result of those event, processing and investigating for customers, and consumer product complaints. DUTIES & RESPONSIBILITIES 1. Essential Duties: a. Perform incoming, set up, in-process and final inspection activities as specified by control plans using inspection tools such as micrometers, optical comparator, calipers. b. Perform audits and develop reports and tracking measurements as assigned by Production Planning Manager or Quality Assurance Manager. c. Complete inspection record as specified by product control plan and work instructions. d. As needed, perform open layout inspections, fulfilling product control plan and First Article requirements. 2. Supports all company programs and strictly adheres to company policies. 3. Performs other functions as assigned by supervisor from time to time. JOB SPECIFICATIONS B. Skills: Ability to multi-task and work with others in a fast-paced environment. Highly-developed problem-solving skills with a strong attention to detail. Customer-oriented and service-minded. C. Work Experience: Experienced in Manufacturing or Quality related field.

HMT has an immediate need for an API 653 certified Inspector to assist with performing inspections in accordance with API standards: Perform API 653 inspections per customer's scope of work and HMT's internal process and procedures Maintain a positive relationship between client, facility and customer Properly interpret regulations, codes and industry standards Ensure that all HMT safety policies and procedures are being followed Required Qualifications: Must hold API Certification and have API Inspection work experience. Must be technically competent and knowledgeable in the application of the current inspection codes. Preferred additional certifications: Current CPR & First Aid TWIC Card Current AOCF and or PMT III (DOT OQ) Respirator fit tested (current) Trained in OSHA 10 and or OSHA 30 JLG lift operator certification (may or may not be approved by HMT Safety Dept.) Current safety training (within the last 12 months) to include but not limited to confined space, fall protection, LOTO, HazCom, etc. About HMT: HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

As a Quality Control Inspector, you will play a vital role in maintaining the highest standards of quality for our products. You will be responsible for thoroughly inspecting materials, components, and finished products to ensure compliance with specifications and industry standards. Your meticulous eye for detail will help us deliver products that meet and exceed customer expectations. Additionally, you will have the opportunity to collaborate with cross-functional teams, identify process improvements, and contribute to a culture of continuous improvement. You will have the chance to showcase your commitment to quality as you participate in our annual AISC QC Audits and develop goals to improve and promote quality throughout the organization. Your ability to work well with production to solve any issues that arise will be crucial in maintaining our high standards. Embrace this exciting opportunity to make a significant impact on our quality control processes and join our team of dedicated professionals. Qualifications: A minimum of 5 years of experience in laying out and fabricating steel is required for this position. Ability to accurately read and interpret fabrication and construction drawings will be essential in ensuring the quality of our products. Welding Certification in D1.1 and/or D1.5 is preferred, as it demonstrates your proficiency in welding standards. Strong attention to detail, excellent problem-solving skills, and the ability to work collaboratively with cross-functional teams is crucial in maintaining our high standards of quality. Benefits: Health/dental/vision/disability insurance Paid time off Paid holidays 401k with employer match and 100% vesting from the beginning Paid weekly Company Paid Life Insurance Selected applicant will be subject to a pre-employment physical with drug/alcohol testing.

Description: Job Description: Every boat that leaves the facility must meet or exceed Nautique's standards. This position assists production staff in finding solutions to problems and working with management to ensure the highest quality standards possible. Duties and Responsibilities: Ensures that all the quality check procedures put in place by the company are followed during every production phase. Approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Approves in-process production by confirming specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor. Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. Documents inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into a quality database. Keeps measurement equipment operating by following operating instructions and calling for repairs as needed. Maintains a safe and healthy work environment by following standards, procedures, and complying with legal regulations. Updates job knowledge by participating in educational opportunities; reading technical publications. Accomplishes quality and organization mission by completing related results as needed. Enforces quality procedures and notes the corrective actions that are taken when needed. Educates the production team on quality control issues and works with department managers to improve overall company safety and product quality. Performs product/process analysis for quality improvement. Represents manufacturing on cross-functional teams. Accomplishes all tasks as appropriately assigned or requested including keeping the work area clean and orderly. Must comply with all OSHA and safety procedures. Performs any other duties as assigned by management. Requirements: Skills and abilities for success in this position: Excellent communication skills, including written, verbal, and visual. Excellent organizational skills and self-motivation. Ability to identify different models and read orders. Computer skills including Microsoft and ability to learn Quality programs. Some areas require added skills depending on QC location: Lamination, Gelcoat, Upholstery, Electrical & Water Testing; boat pulling, driving w/trailer; forklift certified. Ability to manage one's own time and respect the time of others. Ability to consider the relative costs and benefits of potential actions to choose the most appropriate one. Ability to work effectively individually or with a team. Ability to perform tasks under time pressure deadlines. Ability to communicate information and ideas so others will understand. Ability to tell when something is wrong or is likely to go wrong. Knowledge, Education, and Experience include but are not limited to the following: 2 years' experience with boats/or at Nautique. High school diploma or equivalent; college degree preferred. Must be a licensed driver with a good driving record (subject to MVR). Ability to check boats and or parts in accordance with Nautique's Quality System. Must have strong attention to detail. Physical and Work Requirements: Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature. Must be able to bend at the waist and knees and stand for extended periods. Must be able to climb into and out of the interior of boats. Must be able to wear proper safety equipment as needed. Must be able to lift 50 pounds when necessary. The ability to see details at close range. Be able to use and maintain small hand tools (grinder, scraper, razor knife, blower, etc.)

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent (1099 Sub-Contractor) Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

We are looking for a diligent and detail-oriented Quality Inspector to join our warehouse team. The Quality Inspector will be responsible for ensuring the quality and quantity of items received and shipped for orders related to the Department of Defense (DOD). The ideal candidate will have strong organizational skills, a keen eye for detail, and the ability to work in a dynamic, fast-paced environment. What You'll Do: Receive and inspect incoming shipments to ensure items meet required quality and quantity specifications. Conduct random quality inspections of assemblies throughout the production process and perform final inspections of completed orders before shipment. Handle necessary paperwork, including inventory records, inspection reports, and receiving forms. Accurately enter inspection and inventory data into the company's computer system. Keep track of job orders, percentage of completion and deadlines. Assist the production department with tasks as needed, demonstrating flexibility and a willingness to take on multiple roles. What You'll Need: Must possess a valid forklift operator license. Must be a U.S. citizen (required for DOD-related work). Ability to pass a background check and drug test. Bilingual (English/Spanish) preferred. High attention to detail and strong organizational skills. Familiarity with warehouse operations, inventory management, and quality control processes. Handy and comfortable working with tools and in a hands-on environment to optimize processes and space utilization. Flexibility to wear multiple hats and assist other departments as needed. Basic computer proficiency for data entry and reporting. Ability to lift and move objects weighing up to 50lbs. Ability to stand and walk for extended periods in a warehouse environment. What You'll Get: Range: $42,000-$45,000 Medical Insurance: Employer pays 50% of medical insurance cost 6 annual paid holidays (available after 90 days of employment) 5 days' vacation + 3 sick days after 1 year of employment

Aoka is a third-party municipal services provider supporting federal, state, and local governments with code compliance, inspections, and consulting services. We specialize in delivering efficient solutions for building safety, housing standards, and regulatory compliance. Our proprietary software, VertexPlans, streamlines inspection services by integrating plan reviews, field inspections, and reporting into one seamless platform-ensuring faster turnaround times and improved communication for our clients. We are currently seeking a qualified OHP compliance Inspector to perform Housing Quality Standards (HQS) inspections for Senior care facilities. Responsibilities Schedule and conduct on-site inspections for new construction and substantial rehabilitation of Senior Living properties Evaluate units for compliance with HUD Housing Quality Standards (HQS) Complete inspection reports and required documentation in accordance with HUD and company guidelines Qualifications Willingness to travel for inspections Valid driver's license and reliable transportation ICC certification, engineering license, or architectural license OR At least 5 years of experience in multifamily housing inspection is required Compensation $30 - $60 per hour, based on experience and qualifications Apply Now to Join Our Growing Team! Aoka is proud to be an equal opportunity employer and provides equal employment opportunities (EEO) to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity or genetics.

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. 18.5018.50 Job SummaryThe quality control inspector is responsible for the daily/shift inspection of all concourses, main terminal, AOB and outlying buildings. The quality control inspector is responsible for directly communicating with the operation managers & supervisors the results of the quality inspections for the seamless running of all the buildings restrooms, seating areas, loading bridges, conference rooms, receptions area, lobbies, elevators, escalators, moving walkways, etc; overall cleanliness & organization of these areas and assisting in managing a team of energized and motivated professionals. Performs all responsibilities while demonstrating outstanding customer service skills as it relates to this function. This includes working within the team as well as with our customer. Essential Functions Responsible for overall inspection of physical appearance of interior and portions of the exterior of the property Completes a daily/shift walk-through of all terminals and concourses to ensure an aesthetically pleasing environment with fully functioning equipment and amenities Monitors the functions of all service contract partners. Identifies problems, notifies the Site Manager and/or the quality control manager accordingly, and coordinates response from the service contractor Monitors staff on proper safety procedures as established by OSHA and company requirements Provides reports to Site Manager, quality control manager and the city contacts detailing property condition, safety issues and any other noteworthy items Using the established guidelines, documents procedures and ensures processes are followed in cleaning of buildings and other areas of the contract. Ensures that all personnel are properly trained, perform their assigned duties and have proper equipment/supplies to perform their job reporting any issues to managers and supervisors Responds to snow emergencies as needed Communicates to the Site Manager and/or quality control manager as soon as possible the status and outcome of any emergency May be assigned other duties by the Site Manager and/or quality control manager Knowledge and Skills Previous experience in the airport, airline and/or janitorial industry Strong customer service and interpersonal skills required Effective written and verbal communication skills Intermediate command of computer hardware/software is required; specifically, knowledge of Microsoft Windows, Word, Excel, Outlook, SharePoint, and database management Ability to work shifts, extended hours and weekends if required Communicate, receive and exchange improvement ideas and information by verbal and written means Ability to quickly and easily navigate property/buildings are required to meet the job functions Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to lift 40lbs. following appropriate safety procedures. Ability to work in an upright standing position for long periods of time. Ability to work in different environmental working conditions (e.g. heat, cold, wind, rain, snow). Ability to walk and climb stairs; handle, grasp, feel objects and equipment; reach with hands and arms; repeat various motions with wrists, hands, and fingers. Ability to detect auditory and/or visual emergency alarms. Driving when necessary - must possess a valid Driver's License Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Work Authorization Authorized to work in the U.S. Equal Employment Opportunity Employer Flagship is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Americans with Disabilities Act Under the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of their job. If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Job Description We're looking for a QC Mechanical Inspector who takes pride in precision work and ensuring machined parts meet strict quality requirements. This role focuses on in-process inspection, verifying mechanical components throughout production, and supporting a strong quality culture on the shop floor. It's a great fit for someone detail-oriented, hands-on, and comfortable working in a machining environment. Key Responsibilities Perform in-process inspections on machined parts to confirm dimensional accuracy and workmanship. Inspect mechanical components using measurement tools and verify results against blueprint requirements. Document inspection findings and communicate issues clearly to production and quality leadership. Support quality control activities that help prevent defects and improve consistency. Assist with CMM-based inspection activities when needed (experience is a plus). Qualifications Experience inspecting machined parts in a manufacturing or machine shop environment. Strong mechanical inspection skills and understanding of machining processes. Ability to read and interpret blueprints and inspection requirements. Familiarity with standard inspection tools such as calipers, micrometers, gauges, and comparators. Attention to detail and ability to identify nonconforming conditions early. Experience performing in-process inspection in support of production quality. CMM experience is a plus but not required. Strong communication and organizational skills. Equal Opportunity Statement Design Hire is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law. Employment Eligibility If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.

Job Title: Quality Control Inspector Division: FiOptix Inc FSLA Status: Non-Exempt Reports To: Project Manager Job Summary: This position is responsible for identifying and escalating quality deficiencies to support the completion of assigned work. Essential Duties and Responsibilities: Perform real time inspections evaluating safety, compliance standards, appearance, and customer experience Schedule and complete a final inspection of work prior to customer walkthrough Complete and submit timely and accurate quality control reports into the appropriate database Develop and maintain relationships with the quality control counterparts of our customers Respond appropriately to customer complaints and inquiries and escalate matters as required Execute target amount of job safety observations Identify areas of improvement to enhance quality and escalate recommendations to management Complete all required Company documentation Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: One-year telecommunications quality control experience One-year underground construction, aerial construction, and/or multi dwelling unit (MDU) experience Knowledge of highway traffic control standards Technical Skills: Computer and Microsoft Office proficiency Ability to use a wireless tablet Proven knowledge of utility depths and placement Proven ability to read and interpret design prints Soft Skills: Highly organized and detail orientated Strong verbal and written communication skills Ability to work independently and as a member of various teams Ability to multi-task and work in a fast-paced environment under tight deadlines Ability to lead, teach, and train other employees Physical Requirements: Must be able to pass pre-employment screening that includes background and drug testing Must have a valid driver's license and a driving record that meets Company requirements Must be in good physical condition with the ability to stoop, crawl, bend at the knees and waist, squat and lift up to 50 lbs. Ability to stand for long periods of time on varied surfaces Ability to work outdoors in all types of weather May be required to work long and unpredictable hours Ability to travel up to 100% of the time, including short notice travel. Travel includes local site travel or national travel depending on business needs. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations

We are seeking a detail-driven Quality Control Inspector to support aerospace manufacturing operations by ensuring products meet rigorous internal, customer, and regulatory quality standards. This role is ideal for a quality professional who is comfortable working from engineering drawings, applying industry standards, and partnering cross-functionally to uphold a strong Quality Management System (QMS). You'll play a hands-on role in receiving, in-process, and final inspections while helping maintain compliance with ISO 9001 and AS9100 requirements. Key Responsibilities Perform receiving, in-process, and final inspections of materials, components, subassemblies, and assemblies to verify compliance with engineering drawings, specifications, customer requirements, and applicable industry standards. Inspect hardware using precision measurement tools such as calipers, micrometers, gauges, and rulers. Interpret and apply engineering drawings, GD&T (ASME Y14.5), and inspection criteria to determine product conformity. Accurately document inspection results in manufacturing routers, quality records, and ERP systems. Initiate, document, and process Nonconforming Material Reports (NMRs) in accordance with established procedures. Collaborate with Manufacturing, Quality Engineering, Project Engineering, and Supply Chain to resolve quality issues and ensure process compliance. Communicate inspection findings and supplier quality concerns to buyers and other cross-functional stakeholders. Support interactions with customers, suppliers, and regulatory agencies as needed. Maintain flexibility to support business needs, including occasional work outside normal schedules. Required Qualifications Minimum 3 years of quality control inspection experience in a manufacturing or production environment. Experience working within a Quality Management System compliant with ISO 9001 and AS9100. Strong ability to read and interpret engineering drawings. Hands-on experience using standard inspection and measurement tools. Proven ability to identify, document, and report nonconformances. High school diploma or GED. U.S. citizenship required. Preferred Qualifications Associate's degree or technical certification in Quality, Engineering Technology, Manufacturing, or a related field. Working knowledge of IPC-A-610 and IPC-A-620 standards. Familiarity with AS9102 First Article Inspection (FAI) requirements. Experience with root cause analysis and CAPA methodologies. ASQ Certified Quality Inspector (CQI) certification. Knowledge of Lean Manufacturing principles and 5S. Experience with advanced inspection equipment, such as Keyence XM CMM or similar systems.

Details: Introduction: Visium Resources has been asked to identify qualified candidates for this full-time Quality Inspector I position. This position is a direct hire opportunity, which will be on-site in Orlando, FL. Quality Control Inspector I Summary: The Quality Inspector 1 - Quality Control Inspector performs a variety of routine inspection procedures to ensure quality at various stages of production. Inspects incoming materials, in-process and/or finished parts and subassemblies for conformance to quality assurance standards. BENEFITS: Compensation & Benefits: Competitive Wage (based on experience). Bonus: Annual bonus based on achieving company and individual goals. Benefits: Comprehensive medical, dental, and vision coverage. Retirement: 401(k) savings plan. Paid Time Off. Life Insurance at no cost to the associate. Short/Long-Term disability at no cost to the associate. Opportunities for career advancement, professional development and so much more! Employment is contingent upon the success of background check and drug screening. Quality Control Inspector I Job Duties and Responsibilities: Responsible for performing inspections, including Incoming/Pre-production, In-process, Final Inspection and Pre-Ship Inspection. Conduct dimensional and visual inspections of manufactured parts and assemblies in accordance with engineered drawings. Proficient in using micrometers, calipers, thread & pin gauges, no-go gauges, height, and angle gauges to verify mechanical part compliance. Measures dimensions such as length, height, and distance between reference points to ensure product meets specifications. Compile data and documents findings and provide information regarding rework/reject data to more experienced personnel for validation. Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. Demonstrates accuracy and thoroughness; Monitors own work to ensure quality. Must be familiar with data entry and proficient with Microsoft Office and be able to complete all documentation for receiving inspections. Completes work in a timely manner, and work efficiently. Must be able to complete training to achieve proficiency in use of Optical Metrology Systems, XRF measuring instruments, and associated modules within client's ERP system. Must be able to view ITAR data without a license. Details: Quality Control Inspector I Requirements: Knowledge, Skills, & Abilities: Proficient Microsoft Word and Microsoft Excel software skills. Attention to detail and clear communication skills. Knowledge of IPC-A-610, IPC-J-STD-001 preferred Knowledge of GD&T desired Education, Experience and Training: High School Diploma or Equivalent 1-3 years of applicable experience is desired 1-3 years of previous experience in Quality Control Inspection of electronic devices is desirable. Experience working in an ISO 9001/AS9100 certified manufacturing environment is desired. ________________________________________________________________________________________________ Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium. Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. **The pay rate for this role in Florida is $33.40 per hour.** **Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************** **Responsibilities :** + Perform NDT (Non Destructive Testing) inspection of welds, ride structure, and ride vehicles + Execute overhead rigging safety inspections + Complete various mechanical inspections + Perform rope access inspections + Cast members may be required to handle cleaning chemicals and supplies + Additional Personal Protective Equipment (face shields, goggles, refillable hand sanitizers, etc.) may be required **Basic Qualifications :** + Minimum of 3 years' experience performing weld inspections or equivalent visual inspections + Minimum of 2 years' experience documented as a Level II NDT Certified Inspector in magnetic particle and liquid penetrant inspection + Ability to read and work from blueprints, schematics, sketches, and verbal instruction + Familiar with non-destructive test techniques and basic mechanical measurement equipment + Ability to perform rope access work + Ability to lift up to 50 pounds + Excellent written and interpersonal communication skills + Proficiency in standard office software programs and mobile electronic devices **Preferred Qualifications:** + SPRAT Rope Access Certification + Familiarity with ultrasonic digital thickness measurement + Computer literate + Knowledge of AWS and ASME codes + Mechanical inspection experience or ASQ Mechanical Inspector Certification. + Certified Welding Inspector (CWI) **Additional Information :** **Schedule Availability:** Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year. Schedules and start times are subject to vary. **We proudly and enthusiastically encourage qualified individuals with experience in the U.S. Military to apply.** Keyword: WDW Casting WDW: Walt Disney World Casting Hourly Jobs **Job ID:** 1232675BR **Location:** Orlando,Florida **Job Posting Company:** "Walt Disney World Resort" The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.