Inspector jobs in San Buenaventura, CA

Quality Control Inspector Needed in Camarillo Direct Hire Industry: BioTech, Pharmaceuticals Pay range: $23 - $24/hour Monday - Friday 7am - 3:30pm Must Have * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Job Summary Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Essential Functions * Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; * Conduct inspection and testing related to: ► Incoming product. ► First article. ► In-process. ► Final. * Initiate nonconformance reports (NCR). * Performs all aspects of testing related to manufacturing. o Incoming inspections o In-process inspection. o Final Inspection release of finished goods. o Document review. o Supports cross functional departments investigate potential non-conformance's observed * Ensures that all inspections and procedures are properly completed and documented. * Perform pre and post-inspection of product gamma irradiation process. * Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. * Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations * Prepare and submit Metrics reports to the quality supervisor or QC lead * Comply with all safety requirements ensuring work areas meet standards. * May be required to report to multiple facilities within a 2-mile radius. * Job Order document review and release * Other duties as assigned Education * High School Diploma or equivalent with 2 years of experience in quality control inspections. Required Experience & Competencies * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. * Solid organizational and planning skills required. * Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. * Must be able to work effectively and efficiently in a team environment. * Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. * Must display personal accountability for results and integrity. * Must display eagerness to learn and continuously improve. * Must have uncompromising dedication to quality. * Good general mathematical skills. * General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges * General computer skills. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Now Hiring: Quality Inspectors - Aerospace Manufacturing Are you an experienced Quality Inspector looking to advance your career in a high-precision aerospace machine shop? Join our team, where product integrity, process excellence, and safety are top priorities in a fast-paced, technical environment. We are seeking mid- to advanced-level Inspectors with a strong background in machined metal aerospace or military parts, proficiency in GD&T, and knowledge of AS9100, AS9102, and ANSI Y14.5 standards. Key Responsibilities Perform in-process, first-article (AS9102), and final inspections of precision-machined aerospace components Use tools such as micrometers, calipers, thread gauges, height gauges, CMMs, profilometers, and optical comparators Interpret complex blueprints and technical drawings using advanced GD&T (ANSI Y14.5) Record results in MRP systems and support NCR, root cause analysis, and CAPA activities Lead and mentor junior inspectors Support receiving inspections, traceability verification, and adherence to FOD, PPE, and cleanroom protocols Ensure compliance with AS9100, ITAR, and internal quality systems Requirements Minimum 3 years inspecting machined aerospace or military parts (metal only) Proficiency in GD&T, dimensional inspection, and visual inspection Knowledge of AS9100, AS9102, and ANSI Y14.5 standards CMM programming experience (PC-DMIS) a plus Experience with 1factory, FileMaker, or similar QMS/MRP systems Strong shop math, problem-solving, and communication skills in English Dependable, quality-focused, able to work independently and in a team Must pass annual visual acuity and color perception tests (NDT standards) U.S. person required for ITAR compliance Shifts Available Full-Time, Second Shift: Monday-Friday, 3:00 PM - 11:30 PM Initial training will take place on Day Shift: Monday-Friday, 7:00 AM - 3:30 PM Pay & Benefits $22.50-$39.50 per hour (I, II, & III) Medical, dental, vision, life insurance Disability, vacation, sick pay 401k Physical Demands Work primarily in an open warehouse environment with exposure to temperature changes, noise, vibrations, fumes, and chemicals Frequent use of wrists, hands, and fingers Extended periods of sitting, standing, walking, and bending Occasionally lift, carry, push, or pull up to 50 lbs ITAR Requirement This position requires the use of information subject to the International Traffic in Arms Regulations (ITAR). The candidate must be a U.S. person within the meaning of ITAR. ITAR defines U.S. persons as U.S. citizens, lawful permanent residents (i.e., Green Card holders), and some refugees. MGI is an equal opportunity employer. Ready to apply? Join our team today and take your aerospace inspection career to the next level! NO RECRUITERS PLEASE

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Details: QA Inspector Client: Leading Motorsports CompanyLocation: Onsite - Santa Clarita, CAStart Date: ASAPHourly Rate: $25 - $45/hour DOE Overview: A premier motorsports company is seeking a detail-oriented QA Inspector to join their team in Santa Clarita, CA. This role is responsible for inspecting components and equipment to ensure compliance with engineering drawings and specifications. Ideal candidates will have a strong background in dimensional inspection, GD&T, and hands-on experience with precision measurement tools. Key Responsibilities: Inspect components and equipment to verify compliance with design specifications Utilize tolerance measurement tools and apply GD&T standards Validate inspection results and document findings Operate and maintain inspection tools including comparators, surface plates, and manual gauges Conduct material analysis and surface roughness evaluations Support inspection planning, reporting, and activity tracking using Microsoft Office and inventory/data management software Apply geometry, trigonometry, and basic machine shop principles to inspection tasks Collaborate with engineering and production teams to resolve quality issues Details: Preferred Skills & Experience: Ability to read blueprints and interpret dimensional tolerancing and GD&T Familiarity with universal inspection tools and manual inspection techniques Knowledge of raw material specifications and machine tool programming Experience with optical scanning systems and CAD/CAM programming Proficiency in Microsoft Word and Excel; experience with inventory or data tracking software is a plus Strong math skills for interpreting and calculating inspection results Experience with CMM software for prismatic parts using scanning probe heads (Calypso highly desirable) Effective verbal and written communication skills Strong organizational and time management abilities Self-motivated, able to work independently and in a team environment Comfortable working under pressure and meeting deadlines High school diploma or equivalent required; technical coursework in machine shop or tooling is a plus Apply now to join a high-performance team in a fast-paced motorsports environment where precision and quality drive success.

Job Details Oxnard, CA Regular Full Time $20.00 - $28.00 HourlyDescription Inspector 2 $20.00 - $28.00/ Hr. ***Will start 100% On-Site in Oxnard, CA. Must relocate to Henderson, NV in January 2027*** As the largest machine tool builder in the western world, we need world-class talent in all of our departments. And we're not just looking for people for the production floor. Haas is a very vertically integrated company, with a wide range of high-tech career opportunities available. Oh, and yes, we are the same Haas that owns the Haas Factory Racing NASCAR teams, and the Haas F1 Team from the Netflix series: Drive to Survive. The Inspector 2 performs machine shop and receiving inspection under supervision. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follows instructions. Translates dimensions from blueprints using shop math. Operates all equipment with a high degree of confidence. Communicates findings verbally and through the use of email and database applications. Uses basic inspection equipment (micrometer, calipers, test indicators, surface plate, etc.) and a Surface Roughness Tester (profilometer). Works with common geometric features used in blueprints and provide application knowledge of how to inspect for each (roundness, concentricity, flatness, runout, perpendicularity and parallelism). Reads and correctly interprets rejection documentation (rejection tags, purge and hold forms, RGRs, RMAs, etc.). Enters data into inspection database. Sets up inspection gage equipment (bore gages, thread micrometers, etc.). Capable of coordinating and managing calibration POs; keep tools flowing in and out on schedule, keep records complete and accurate, etc.; all with minimal supervision. Uses a Profile Projector (Comparator) and Hardness Tester. Inspects any dimension applicable to surface plate and hand tool inspection. Obtains correct information from MRP application to properly perform a MRB transaction (inventory control of a rejected item). Keeps work area and equipment carts organized and clean. Keeps SAP transactions organized and doesn't leave notifications and requests open and forgotten. Meets productivity goals related to your department workload. Observant of company safety standards. Must be able to operate both powered and non-powered material handling equipment including forklifts, pallet jack, cranes, and mobile straddle stacker lift. Employees must report any damage to a supervisor or manager. • Employees are expected to follow instructions, procedures and to escalate any issue impacting workflow, quality, etc. • Employees must exhibit honesty and integrity as well as demonstrate adherence to rules, procedures and policies. Supervisory Responsibilities Supervisory Responsibilities Supervised Employees This job does not have any supervisory activities. 0 Qualifications Qualifications To perform this job successfully the candidate must be able to perform each essential duty adequately. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications Understanding of shop math, geometry and related trigonometry for 90 degree triangular calculations. Knowledge concerning the proper inspection tool selection. Can obtain and maintain a license for the safe operation of a Haas fork truck. Working knowledge of ESD protection / handling requirements. Can read and correctly interpret blueprints, procedures and work instructions. Demonstrates cleanliness requirements involved with inspection equipment and parts being inspected. Working knowledge of electronic component identification, understanding units of measure and common methods of testing for component compliance. Desired Qualifications Education High school diploma or high school equivalency (HSE) credential such as general education degree (GED) is required, plus an additional one to three months related experience, training and/or equivalent combination of education and experience. Preferred Major Other Minimum Years of Experience 1-3 years Language Skills Must have the ability to read, write, and comprehend simple instructions and safety rules; such as work instructions, short correspondence, and memos in English. Mathematical Skills Must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. May need to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Must have the ability to apply common sense and understanding in order to carry out written, oral, and/or diagram instruction forms. Must be able to deal with problems involving several concrete variables in standardized situations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Activity Duration Sitting Occasionally Standing Frequently Walking Occasionally Bending (neck) Frequently Bending (waist) Rarely Squatting Frequently Twisting (neck) Frequently Twisting (waist) Frequently Climbing Frequently Kneeling Frequently Crawling Frequently Reaching (above shoulder level) Frequently Reaching (below shoulder level) Frequently Frequently Hand Use Duration Repetitive use of hand Frequently Simple grasping Frequently Power grasping Frequently Fine manipulation Frequently Pushing & Pulling Frequently Vision Close vision Yes Distance vision Yes Color vision Yes Peripheral vision Yes Depth perception Yes Adjust focus Yes Lifting Requirements Duration 0-10 lbs. Frequently 11-25 lbs. Frequently 26-50 lbs. Frequently 51-60 lbs. Occasionally 61+ lbs. Occasionally Equipment Use Duration This position requires computer use, including monitor, keyboard, mouse, trackball, touchpad, etc. Occasionally Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Noise Level The noise level in the work environment is usually: Loud Work Environment Duration This position operates in a general office or engineering lab environment Rarely Employee will work around machining or on the production floor Frequently Employee is exposed to moving mechanical parts and vibration Frequently Employee is exposed to hazardous chemicals, fumes or airborne particles Occasionally Employee is exposed to outside weather conditions, extreme cold or extreme heat Frequently Employee is exposed to risk of electrical shock Never

Woodward is committed to creating a great workplace for all team members. Our company and its members are committed to acting with integrity, being respectful and accountable to one another, and staying humble and driven, while maintaining the highest professional and ethical standards. We are steadfastly committed to attracting the best talent across our communities creating a rewarding workplace. Together we are fulfilling our purpose to design and deliver energy control solutions our partners count on to power a clean future. Woodward supports our members' wellbeing and regularly benchmarks with other companies in our industry to offer an extensive Total Reward package for this position. Salary will be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Estimated hourly pay: $36.19 - $44.19 - $52.18. Plus, shift differential and overtime, if applicable 9.5% annual retirement benefit opportunity Tuition reimbursement and Training/Professional Development opportunities for all members 12 paid holidays Industry leading medical, dental, and vision Insurance Vacation / Sick Time / Vacation Buy-up / Bereavement leave Adoption Assistance Employee Assistance Program, including mental health benefits Member Life & AD&D / Long Term Disability / Member Optional Life Member referral bonus Spouse / Child Optional Life / Optional AD&D / Healthcare and Dependent Care Flexible Spending Voluntary benefits, including: Home / Auto Insurance discounts Whole Life Insurance / Critical Illness Insurance / Legal Assistance / Military Leave Are you ready to make your mark? If you're a Quality Inspector - Programmer, we have an exciting opportunity for you. The Quality Inspector - Programmer is responsible for the operation, inspection and programming of the CMM machine, the analysis and interpretation of blueprints, manuals and other materials to determine specifications, to inspect and test procedures, and to communicate technical information to others, in an industrial setting. This position includes supplier involvement, technology involvement, and early PLC involvement. This position typically works under very little supervision and provides guidance to other members. What's In It For You At Woodward, our “employees” are called and treated as “members” and we've created a culture that appreciates and values the contributions of every member. It's an inclusive, positive, collaborative, and socially responsible environment where members work together for outstanding outcomes. Essential Functions Program and operate /CMM machine and maintain /CMM work instructions for the set-up and inspection of parts. Ability to download CAD models to create optimal and reliable CMM programs for better and faster results. Perform programing and operation of specialized inspection equipment, (e.g. Talyrond, Nikon vision system, CMMs), discusses inspection results with those responsible and recommends necessary corrective actions. Analyze and interpret blueprints, routings, evaluation sheets, manuals and other materials to determine specifications, inspection and testing procedures, adjustment and certification methods, formulas, and measuring instruments required. Clean, maintain, measuring instruments and test equipment and work closely with engineers and suppliers to define and implement inspection methods on new products during development. Collect and analyze inspection data and make computations, as necessary to determine inspection results and perform first article inspections based on work order instructions. Communicate information to others about project status, updates, specific instructions, etc. and participate in NPI PFMEA activities. Inspect manufactured components, train and mentor others, including suppliers, on best practices related to inspection procedures, techniques and tool usage. Support Early Supplier Involvement (ESI) activities for new product introduction (NPI) by visiting suppliers and consulting them on the most effective methods for writing CMM programs for new product. Other Functions Promote teamwork within the organization. Follow all departmental safety rules and regulations. Use and put on all appropriate safety equipment, gear, and clothing/protection required by work activities. What We Are Looking For To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge/Skills/Abilities Advanced knowledge of GD&T (geometric dimensioning and tolerancing) principles and their relation to inspection. The ability to use this knowledge to facilitate communication between Design, Production and Metrology to better serve the customer. The ability to read and use micrometers, functional and cylindrical gauges, comparators, indicator setups, scales. Knowledge of CMM operations including setup, programming, and controls. The ability to use computer and web-based systems to input, access, modify, or output information. Knowledge of part special handling guidelines and specifications. This includes researching part handling instructions using facility databases or work orders and following the handling procedures required. Knowledge of non-conformance procedures and processes when parts fail inspection. This includes knowledge of systems required to log and track failed inspections and associated documentation as needed within area of responsibility. Knowledge of and ability to communicate technical and complex material to multiple audiences, with differing knowledge levels, including our supply base. The ability to accomplish a task with concern for all the areas involved, including the ability to notice minute inconsistencies/faults in parts, and the ability to make timely, sound decisions. This includes recognizing when outside advice is needed, and committing to action, even in uncertain situations. The ability to write effectively, to read and understand work documents and to communicate information clearly to coworkers and supervisor. The position also involves the ability to coach or mentor other members, through instruction and personal example. General knowledge of machines and equipment functionality, and how tools could be used on such equipment/machines. This includes the ability to learn new systems quickly, understanding how parts relate, and how they impact system functionality. The ability to identify opportunities to improve current production processes and to implement the necessary steps for the improvements. The ability to provide excellent service to internal customers. The ability and willingness to demonstrate eagerness, enthusiasm, and optimism for work activities. This includes the ability and willingness to take ownership of work activities, to learn and understand company policies and procedures. The ability and willingness to take independent action and complete job tasks without being instructed to complete them. The ability to define, diagnose, and resolve problems. Knowledge of how quality impacts the success of the organization including costs to customers, costs of recalls and potential costs due to negative impacts on a company's reputation. This includes taking the necessary steps to ensure quality on a consistent basis and striving for improvement. The ability to acquire and apply new knowledge and skills and the ability to integrate knowledge of current resources and constraints, priorities and manufacturing processes to determine the benefits and costs associated with key decisions. Knowledge of the Six Sigma processes and the ability to apply Six Sigma principles to production process for continual improvement and operational effectiveness, desired. The ability to mentor others. The ability to perform simple arithmetic computations including addition, subtraction, multiplication, and division correctly using whole numbers, fractions, decimals, and percentages. The ability to process multiple types of information and/or perform multiple tasks simultaneously and the ability to follow work orders efficiently. The ability to see details (e.g., letters, numbers, codes, color, symbols, marks, labels, signs) clearly to accomplish work tasks in a safe and efficient manner and possessing strong hand-eye coordination. The ability to conduct a Gage R&R for CMM related work. The ability to conduct capability studies from the CMM as required. Strong communication skills; ability to communicate effectively internally and with suppliers. Ability to consult and provide expertise in order to utilize the most effective methods for writing CMM programs for new products. Demonstrated knowledge of technological advancements and breakthrough's in the metrology industry. Ability to communicate technological advancements in the form of measurement techniques or products. Education or Formal Training US High school diploma or equivalent required. or equivalent. Complete advanced programming classes in PC-DMIS or other relevant programming software. Experience 5+ Related work experience required. This position is part of an IAM Bargained Group. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). All applicants must be U.S. persons within the meaning of ITAR and EAR, or possess all required authorizations from the U.S. Department of State Department and the U.S. Department of Commerce. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Woodward is an equal opportunity employer and does not discriminate in hiring or employment on the basis of race, color, religion, sex (including sexual orientation and gender identity), national origin, age, disability, protected veteran status, or any other category protected under federal, state, or local laws.

If you're looking for a job **ASAP** and you have **Inspection** experience, then this is the role for you! An aerospace company in **Valencia** is looking for **Quality Inspectors** to join the team! Aerotek provides a **rapid** **interview process** so you start work as soon as possible! **Skills** **:** Quality Inspection / Receiving / Blueprints / Aerospace or Medical experience is a plus / First Article or AS9100-AS9102 are a plus but not required / QC or QA / Micrometers / GD&T **Experience Level:** Entry - Expert Level **Location:** **Valencia** / North Hollywood / Burbank / Chatsworth / Glendale / Simi Valley **Shift:** Mon-Friday 1st shift 6am-3:30pm **2nd shift: 3pm - 11:30pm** Company offers good overtime! **Pay is depending on experience** $20-35 (maybe more depending on experience) Apply right now and expect a **call/text** from **Ryan with Aerotek** . Positions with this company will be **filled quickly!** **Job Type & Location** This is a Contract to Hire position based out of Valencia, CA 91355. **Pay and Benefits** The pay range for this position is $18.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Valencia,CA 91355. **Application Deadline** This position is anticipated to close on Dec 18, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description Job Title: Quality Control Inspector II F Reports To: Quality & Process Planning Manager Job Purpose The Quality Control Inspector II is responsible for ensuring that all products meet established quality standards and customer specifications. This role performs inspections, checks, and tests during the manufacturing process, records observations, and recommends improvements. The position requires proficiency with ERP systems to produce quality reports for internal and external use, while supporting company-wide quality initiatives and continuous improvement efforts. Duties & Responsibilities Ensure compliance with all quality check procedures throughout the production process. Perform required physical testing in accordance with Work Instructions. Develop inspection plans aligned with company and customer-specific requirements. Conduct required visual checks and verify masking accuracy against blueprints and purchase orders. Act as subject matter expert for multi-process orders. Approve internal masking with resource owners to prevent process failures. Record inspection data, document pass/fail status, and report rejections with photo evidence as needed. Tag and hold parts for review when disposition is required. Complete logbooks for Copper Sulfate and 24-hour humidity tests. Review Shop Travelers for accuracy, completion, and compliance. Verify packaging instructions are followed before shipment and ensure traceability. Inspect expedited, regular, and rework orders for proper processing. Perform random sampling inspections on large quantity orders. Gather required measurement tools and take photos, sharing findings with customers and production teams. Promote accuracy in job scanning and identify opportunities to improve shop floor efficiency. Utilize ERP software to document corrective actions and prevent recurring quality issues. Educate production staff on quality control issues and support improvement efforts. Assist Quality Engineering and Specialists with troubleshooting and corrective actions. Maintain communication via email and phone as required. Ensure inspection benches are organized and clean; maintain 5S standards and audits. Perform other duties as assigned by management. Qualifications 3-5 years of quality control inspection or related experience. High School Diploma or equivalent required. Basic blueprint reading and interpretation. Proficiency with Microsoft Office Suite and ERP systems. Strong verbal, written, and customer service skills. Experience using measuring tools (meters, gauges, calipers, etc.). Ability to work full-time, including overtime and weekends as needed. Key Competencies Strong verbal and written communication skills. Attention to detail and accuracy. Basic math and analytical skills. Documentation and reporting skills. Hand-eye coordination. Ability to stay organized and maintain good housekeeping practices.

Job Title: Inspector II, Manufacturing Support Hours/Schedule: 8:00am to 5:00pm Type: Contract Pay: $23/hr Responsibilities Performs inspection of manufacturing goods during the manufacturing process. Conducts dimensional and electrical inspection of sub-assemblies or final systems assemblies. Interprets prints, manufacturing drawings, diagrams, wire cards and lists in approving or rejecting in-process or final assemblies. This position requires knowledge that is acquired through experience, specialized education or training. The role has clearly defined procedures and tasks as well as defined guidelines to aid in decision making. The job requires a basic understanding of work routines and procedures in own discipline. The technical procedures for this level are well defined. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations. Typically requires selecting between solutions already established. This job typically requires no experience. Requirements This position requires a basic understanding of work routines and procedures in own discipline. The technical procedures for this level are well defined. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations. Typically requires selecting between solutions already established. This job typically requires no experience. Benefits System One offers eligible employees health and welfare benefits coverage options, including medical, dental, vision, spending accounts, life insurance, voluntary plans, and participation in a 401(k) plan. Ref: #558-Scientific System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Quality Assurance Inspector (Electronics Assembly) Responsibilities: As a Quality Assurance Inspector, your primary responsibility is to ensure that our assembled electronic products meet both internal and industry standards. This includes the inspection of incoming goods at the component level, electronic printed circuit board assemblies (PCBAs), and mechanical assemblies. You will be expected to capture quality data, submit inspection reports, and review the assembly stages while preparing non-conformance reports when necessary. Required Key Duties: Conduct inspections of electronics against drawings, bill of materials, and datasheets. Collaborate with the assembly team to address quality control issues and improve overall product quality. Document inspection results meticulously by completing reports and logs. Collect yield and defect data into our quality database. Maintain a safe and healthy work environment by strictly adhering to company policies and procedures. Safeguard the product through the entire process, implementing best handling practices. Assist with product containment in the event of a non-conformance. Flexibility to engage in multiple inspection toll gates as required. Additional job duties as assigned. Qualifications and Requirements: Minimum of 1-year previous work experience in an Electronics Quality Inspection role. Ability to read and interpret work instructions, procedures, drawings, schematics, and data-sheets. Excellent vision, with the capability to distinguish color codes, component markings, and polarity markings, using close vision (within 10-20 inches). Knowledge in IPC-A-610 & J-STD-001; the qualified candidate will be trained if not already certified. Understanding of electronic components and electronic assembly processes. Proficient with tools such as calipers, micrometers, microscopes, shims, and pin gauges. Computer literate with minimum entry-level to mid-level in Microsoft Office (Word, Excel, Outlook). Required Education: Minimum: High school graduate or equivalent. Other Requirements: Will occasionally/frequently: stand, walk, sit, use both hands, and carry/lift/push/pull to 25 lbs. This is a full-time position located at our Camarillo facility, Monday through Friday, 8am to 5pm (October through May). Summer hours (June through September): Monday through Friday, 7am to 3:45pm. Overtime is required including starting early, staying late, and working weekends. We are ITAR Registered (International-Traffic-In-Arms-Regulations). Hired candidate must be a US Citizen or Lawful Permanent Resident. Additional Information: By joining us, you become a part of a great company with a culture of teamwork, collaboration, and a commitment to excellence. We value our employees and strive to provide a supportive and inclusive work environment where your contributions are recognized and rewarded. If you meet the qualifications and are ready for a challenging yet rewarding role, apply today! Pay Range: $20 to $26 per hour. Advanced Motion Controls considers several factors when extending an offer of employment, including but not limited to: the candidate's education/training, work experience, knowledge, skills and abilities, responsibilities of the position, internal pay equity, as well as market and business considerations. ADVANCED Motion Controls prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law. ADVANCED Motion Controls is ITAR Registered (International Traffic In Arms Regulations). Any candidate we hire must be a US Citizen or Lawful Permanent Resident. NOTE TO STAFFING AGENCIES AND RECRUITERS: Advanced Motion Controls does NOT accept unsolicited resumes from any external agency for the placement of any position. Unsolicited resumes submitted by agencies and received by Advanced Motion Controls will be considered the property of Advanced Motion Controls and may be contacted and engaged with directly by Advanced Motion Controls, with no placement fee due. Advanced Motion Controls will NOT pay a placement fee or any other fees to any third-party agency, firm or recruiter who is not specifically retained with a signed fee agreement by Advanced Motion Controls' Human Resources Manager and instructed to conduct a candidate search. Please do NOT forward unsolicited resumes to our website or to any Advanced Motion Controls employee. Advanced Motion Controls will NOT be responsible for any fees associated with unsolicited resumes.

ABOUT SANISURE SaniSure is a multinational manufacturer of single-use bioprocessing solutions (SUT) used in the production of biological drugs, including monoclonal antibodies, cell therapies, gene therapies, and vaccines. With operations in the U.S. and in Europe, SaniSure operates a leading platform of vertically integrated critical fluid management technologies and integrated solutions. Its single-use products and system solutions are sold to global pharma and biotech companies and are used from R&D through full-scale commercial cGMP manufacturing of among the most innovative large molecule therapeutics and vaccines. This role is expected to be on-site. We continue to be on a robust growth trajectory, via both organic and inorganic growth, as the company capitalizes on increasing global demand and continues its transition from a component manufacturer to an integrated systems and solutions provider. Our primary offering includes high-value assembly solutions and a portfolio of market-leading products, including PharmaTainer bottles and carboys and related assemblies, Mixed4Sure mixing solutions, Flex4Sure bags and bag assemblies, Fill4Sure needles and needle assemblies, fittings, clamps and a wide range of silicone, braided and thermoplastic tubing solutions. The company has a growing portfolio of innovative solutions serving fast-growth applications, such as cell and gene therapies. SaniSure is a high-growth, nimble and innovative company with a strong customer and market focus. Join us and grow your career at SaniSure! SUMMARY : Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Shift 7:00 to 3:30 pm. ESSENTIAL FUNCITONS: Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; Initiate nonconformance reports (NCR). Performs all aspects of testing related to manufacturing. Incoming inspections In-process inspection. Final Inspection release of finished goods. Document review. Supports cross functional departments investigate potential non-conformance's observed Ensures that all inspections and procedures are properly completed and documented. Perform pre and post-inspection of product gamma irradiation process. Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations Prepare and submit Metrics reports to the quality supervisor or QC lead Comply with all safety requirements ensuring work areas meet standards. May be required to report to multiple facilities within a 2-mile radius. Job Order document review and release Other duties as assigned QUALIFICATIONS High School Diploma or equivalent with 2+ years of experience in quality control inspections. Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. Minimum of 0-2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Solid organizational and planning skills required. Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. Must be able to work effectively and efficiently in a team environment. Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. Must display personal accountability for results and integrity. Must display eagerness to learn and continuously improve. Must have uncompromising dedication to quality. Good general mathematical skills. General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges Equal Opportunity Employer We are committed to providing equal employment opportunities to all employees and applicants without regard to race, ethnicity, religion, color, sex (including childbirth, breast feeding and related medical conditions), gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship status, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state and local laws.

An Inspector must have an aptitude for mechanics and an eye for detail. Their function is to ensure that all parts and products under their care are in proper working order and meet the quality standards of the company. Job Responsibilities: * Able to perform cleaning methods on small optics using both hands and a variety of tools such as tweezers, suction cups, clamps, Q-Tips, etc. * Able to interpret blueprints of complex machined parts and be able to inspect parts accurately. * Inspect Geometric Dimensioning and Tolerance (True position, Runout, Concentricity, Flatness, Perpendicularity, etc.) * Inspect complex machining parts by using manual hand tools (height gauge, micrometer, Sunnen hone gage, bore gauge, pitch micrometer, optical comparator, and other hand tools) * Perform visual inspection for chips, fractures, cracks and voids under microscope or toolmakers scope * Operate marking equipment for traceability identification * Calculate progressive dimensions for suitability of downstream applications * Identify any defective items and handle according to established procedures. Knowledge, Skill and Experience: * Inspection experience a plus but not necessary. * Must be able to work independently with minimal guidance required. * Good time management. * Attention to detail. * Excellent hand-eye coordination. * Skilled with mechanics. Minimum Education (or substitute experience) required: High School diploma or GED equivalent. Minimum Experience Required: Entry level position. Note: This is not intended to be exhaustive in every respect, but rather to clearly define the fundamental purpose, responsibilities and dimensions for the role. Therefore, this does not describe any individual role holder. In addition to the contents of this job description, employees are expected to undertake all other reasonable and related tasks allocated by their line manager. The Company is committed to providing equal employment opportunities for all employees and applicants for employment. The Company does not discriminate in employment opportunity or practices on the grounds of gender, race, religion or belief, age, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by national laws under which the Company operates. In the instance that the position will involve having access to items and technical data that may be controlled under U.S. export laws and regulations ("U.S. Export Control Laws"), including but not limited to the Export Administration Regulations ("EAR") and the International Traffic in Arms Regulations ("ITAR"). To comply with the U.S. Export Control Laws, and in conjunction with the review of candidates for those positions within G&H that may present access to export-controlled technical data, G&H must assess whether candidates are "U.S. persons" as defined under the EAR (15 C.F.R. Part 772) and the ITAR (22 C.F.R. § 120.15). Certain questions asked during the application process are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this position. Salary Description $22-$26/hour

Description: An Inspector must have an aptitude for mechanics and an eye for detail. Their function is to ensure that all parts and products under their care are in proper working order and meet the quality standards of the company. Job Responsibilities: Able to perform cleaning methods on small optics using both hands and a variety of tools such as tweezers, suction cups, clamps, Q-Tips, etc. Able to interpret blueprints of complex machined parts and be able to inspect parts accurately. Inspect Geometric Dimensioning and Tolerance (True position, Runout, Concentricity, Flatness, Perpendicularity, etc.) Inspect complex machining parts by using manual hand tools (height gauge, micrometer, Sunnen hone gage, bore gauge, pitch micrometer, optical comparator, and other hand tools) Perform visual inspection for chips, fractures, cracks and voids under microscope or toolmakers scope Operate marking equipment for traceability identification Calculate progressive dimensions for suitability of downstream applications Identify any defective items and handle according to established procedures. Knowledge, Skill and Experience: Inspection experience a plus but not necessary. Must be able to work independently with minimal guidance required. Good time management. Attention to detail. Excellent hand-eye coordination. Skilled with mechanics. Minimum Education (or substitute experience) required: High School diploma or GED equivalent. Minimum Experience Required: Entry level position. Note: This is not intended to be exhaustive in every respect, but rather to clearly define the fundamental purpose, responsibilities and dimensions for the role. Therefore, this does not describe any individual role holder. In addition to the contents of this job description, employees are expected to undertake all other reasonable and related tasks allocated by their line manager. The Company is committed to providing equal employment opportunities for all employees and applicants for employment. The Company does not discriminate in employment opportunity or practices on the grounds of gender, race, religion or belief, age, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by national laws under which the Company operates. In the instance that the position will involve having access to items and technical data that may be controlled under U.S. export laws and regulations ("U.S. Export Control Laws"), including but not limited to the Export Administration Regulations ("EAR") and the International Traffic in Arms Regulations ("ITAR"). To comply with the U.S. Export Control Laws, and in conjunction with the review of candidates for those positions within G&H that may present access to export-controlled technical data, G&H must assess whether candidates are "U.S. persons" as defined under the EAR (15 C.F.R. Part 772) and the ITAR (22 C.F.R. § 120.15). Certain questions asked during the application process are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this position. Requirements:

Responsible for performing and recording visual inspection of component level and/or top assembly products. Job Duties and Responsibilities Other tasks and duties may be required as directed. * Required to perform simple product inspections with appropriate supporting documentation verifying actual results against drawing and/or specification requirements with little supervision. * Verify supplier approval status and certifications against drawing and/or specification requirements for accuracy and completeness. * Verify compliance of finished hardware with drawing requirements based on shop practices as they relate to unfinished hardware (e.g., visual verification of machined areas, etc.) * Ability to understand and conform to internal company procedures. * Perform simple mathematic calculations. * Ability to effectively inspect product using basic inspection tools, which may include, but not limited to, micrometers, bore gages, height gages, etc. * Use quality-related software and ERP to appropriately record assigned job results based on completed processes. * Meet deadlines of assigned jobs while maintaining the integrity of the position. * Seek and document lean process improvement ideas. * Execute formal first article reports to AS9102 standards. * Review ATP for accuracy and completeness. * Obtain customer source delegation, as required. Qualification Requirements * Education/Experience * High School diploma or General Education Degree (GED) * At least one year of related experience or training. * Language Skills * Good command of the English language, both written and spoken. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to read and interpret blueprints. * Ability to write routine reports and correspondence. * Ability to speak effectively before small groups of customers or employees. * Math Skills * Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume and read decimals down to the millionth of an inch. * Reasoning Skills * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardizations exist. * Ability to interpret a variety of instructions furnished in written, verbal, diagram, or schedule form. * Computer/ Office Skills * Database * Basic windows/internet browser * ERP/Inventory * Microsoft Office - Excel, Word, Power Point * Typing * Blueprint Reading * Mechanical Inspection - Basic components * Material and thread finishes Physical Demands and Work Environment * Physical Demands * Frequent Activities: Standing, sitting, walking, typing, handling objects, reaching, talking/hearing, lifting/pushing/pulling up to 10 lbs. * Occasional activities: Lifting/pushing/pulling up to 25 lbs * Rare activities: Climbing/balancing, stooping, kneeling, crouching, lifting/pushing/pulling heavy weights (50-100+ lbs) * Vision Requirements * Frequent: Close vision, depth perception, ability to adjust focus, computer work * Occasional: Color vision * Rare: Distance vision, peripheral vision * Work Environment * Frequent exposure: Moderate-to-loud noise * Occasional exposure: Mechanical parts, fumes, airborne particles, toxic chemicals, and very loud noise. * Rare exposure: High places, outdoor weather, electrical shock, and vibrations, and very quiet-to-quiet noise levels. About Crissair, Inc. Since 1954, Crissair has manufactured high-quality precision components for nearly every airframe manufacturer and major subcontractor in the industry for both military and commercial aircraft. Crissair's primary objective is designing, developing and manufacturing superior quality hydraulic, fuel and pneumatic system components of all complexity levels. Strict design specifications and rigorous quality criteria are the essential factors in Crissair's success. Our deep knowledge and understanding of our markets and customers' industries allow us to adapt and deliver quality relevant products and services. This experience, together with our commitment to a customer-centric culture, is the reason why many of the world's largest companies turn to Crissair as a partner on everything from day-to-day operations to some of the most challenging Aerospace projects around the world. Compensation and Benefits Offered Actual base salary offered to the selected applicant will be based on their work location, qualifications, job related skills, relevant education, and training experience. Base hourly rate range Minimum $21.18- Maximum $25.42 Depending on experience Crissair offers the following benefits to regular full time employees: * Medical (with Health Savings Account), Dental, and Vision Insurance * Healthcare Flexible Spending Account * 401(k) Retirement Plan with company match * Stock Purchase Plan with company match * Company Paid Basic Life Insurance * Paid Time Off, Sick Leave, Bereavement Leave, Paid Jury & Holidays * Parental & Caregiver Leave * Professional Education Assistance Program * Employee Assistance Program * Employee Appreciation Incentives (Birthdays, Service Awards, etc.) * PPE Reimbursement Crissair, Inc. respects your privacy. To learn more, please read our Privacy Statement Crissair, inc. Is an equal opportunity employer. Applicants are considered on the basis of skills, experience, and qualifications without regard to race, color, religion creed, sex, sexual orientation, age, national origin, ancestry, marital status, physical and mental disability, veteran status, medical condition, genetic information or characteristics, gender and gender identity, or any other legally protected status. Please note, the company provides goods and services to the us government under the International Traffic in Arms Regulations (ITAR) and must comply with the requirement that all employees be us citizens or permanent us residents with valid green cards. We comply with the Los Angeles County Fair Chance Ordinance for employers. We will not inquire about your criminal history until after a conditional offer of employment has been made. Any criminal history will be considered in accordance with applicable laws and regulations. Crissair, Inc. is committed to providing equal employment opportunities to all applicants, including those with disabilities. If you require a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact Human Resources at *************.

Quality Inspector Opening! We are seeking a skilled and detail-oriented Quality Inspector to join our team. As a Quality Inspector, you will be responsible for ensuring that our products meet the highest quality standards through inspection, testing, and documentation. You will play a crucial role in maintaining our commitment to excellence and customer satisfaction. Responsibilities: Perform thorough inspections of incoming materials, in-process components, and finished products to ensure compliance with established quality standards and specifications. Conduct inspections using precision measuring instruments, gauges, and testing equipment. Analyze and interpret technical drawings, specifications, and other relevant documents to determine compliance with quality requirements. Document and report inspection findings, test results, and non-conformities, and collaborate with cross-functional teams to resolve any quality issues. Monitor and maintain inspection equipment, including calibration and troubleshooting as needed. Participate in root cause analysis and corrective action initiatives to identify and address quality concerns. Provide guidance and support to production teams in implementing quality control procedures and best practices. Conduct product audits and review quality documentation to ensure adherence to regulatory and industry standards. Contribute to continuous improvement efforts by identifying opportunities for process optimization and efficiency gains. Qualifications: High school diploma or equivalent, with additional technical or vocational training in quality assurance or a related field preferred. Proven experience as a Quality Inspector in a manufacturing or production environment. Strong understanding of quality control principles, inspection techniques, and measurement tools. Ability to read and interpret technical drawings, specifications, and documentation. Familiarity with relevant regulatory and industry standards, such as ISO 9001, AS9100, or similar. Excellent attention to detail, with the ability to identify and address non-conformities and discrepancies. Strong communication skills, both written and verbal, with the ability to effectively collaborate with cross-functional teams. Ability to work independently, prioritize tasks, and meet deadlines.

Quality Control Inspector - Wire and cable harnesses Full\-time, in\-person On\-the\-job training Must be able to perform detail\-oriented tasks, including inspection and testing. Summary: With supervision, perform basic and routine assembly operations on components, and sub\-assemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions. Core Functions: Advanced Soldering Crimping techniques Connector assembly Understanding of Travels and Drawings Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc. Use of rulers and tape measure. Knowledge and experience: Cable\/Harness Assembly in Aerospace and Military Applications Ability to Read & Interpret Blueprints, Schematics, Traveler\/Routers, Bills of Material & Wire Lists. Basic math and measurements. Fluent English The following is preferred but not required: Experience interpreting design drawings Experience with wire and cable harnesses Familiarity with standard specifications such as IPC\/WHMA\-A\-620, IPC J\-STD\-001, and NASA\-STD\-8739.4 Certification to the standards IPC\/WHMA\-A\-620, IPC J\-STD\-001, and NASA\-STD\-8739.4 is a big plus. Schedule: M\-F 6:00 am\-2:30pm. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"653983288","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"ZR_1442_JOB"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Work Experience","uitype":2,"value":"4\-5 years"},{"field Label":"Salary","uitype":1,"value":"$20\-$25"},{"field Label":"Salary Type","uitype":2,"value":"Hourly"},{"field Label":"City","uitype":1,"value":"Westlake Village"},{"field Label":"State\/Province","uitype":1,"value":"California"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"91362"}],"header Name":"Quality Control Inspector\-Wire Cable and Harness","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:3525447","is JobBoard":"false","user Id":"4**********0184003","attach Arr":[],"awli ApiKey":"861ql0p5wym4v2","custom Template":"3","awli HashKey":"66ba2a8eeb5a681ba7da00d31a032d78e5ed3414d140cf204a55382c0c8fce038ffeabbeedb5adcc344251186e484454f2800ec019c1cd83b305bb4e1324cd14","is CandidateLoginEnabled":false,"job Id":"4**********8276032","FontSize":"15","google IndexUrl":"https:\/\/greathirehr.zohorecruit.com\/recruit\/ViewJob.na?digest=Qx8B8qu1HVi@yVb@TMCCeHkGwssng5Nj5XZPFJ3aThw\-&embedsource=Google","location":"Westlake Village","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"5a0s1eed**********48682b45b77ac5327c6"}

Situated atop the scenic bluffs overlooking Santa Monica Beach, Fairmont Miramar Hotel & Bungalows is just a stone's throw away from some of Southern California's best attractions including Santa Monica Pier and its historic carousel as well as Third Street Promenade -- famous for its fine restaurants, live entertainment, movie theatres, shopping, local artists' scene and a weekly farmer's market. What is in it for you: Employee benefit card offering discounted rates in Accor worldwide for you and your family Learning programs through our Academies designed to sharpen your skills Ability to make a difference through our Corporate Social Responsibility activities, like Planet 21 Career development opportunities with national and international promotion opportunities. The sky is your limit Pay Rate Range: $26.03-$32.54 USD Gross per hour Job Description Reporting to the Director of Housekeeping, responsibilities and essential job functions include but are not limited to the following: Inspect all rooms assigned to Room Attendants on a daily basis to ensure that standards and productivity levels are being met and maintained. Notify Room Attendant(s) of any deficiencies found in the room and note on the attendant's board. Ensure the Room Attendant returns to the room to correct the deficiency, when applicable. Re-inspect the corrected room. Ensure overall guest satisfaction. Qualifications Must have minimum one year of customer service experience Must have friendly, helpful, engaging manner Additional Information All your information will be kept confidential according to EEO guidelines. Our commitment to Diversity & Inclusion: We are an inclusive company and our ambition is to attract, recruit and promote diverse talent. Why work for Accor? We are far more than a worldwide leader. We welcome you as you are, and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor's limitless possibilities. By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit ************************** Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS #LI-YC1

MWH is a leading water and wastewater treatment focused general contractor in the US with a rich history dating back to the 19th century Fueled by the mission of Building a Better World our teams are rapidly growing across the nation As a company committed to our teams well being and growth we offer a supportive work environment opportunities for advancement and the chance to contribute to a mission that shapes the future Your expertise and ambition are valued here The work we do matters The critical systems infrastructure we build changes lives betters communities and improves ecosystems If youre passionate about this we want to hear from you About the Role MWH Constructors Construction Management Services CMS group is seeking qualified candidates for the position of Quality Inspector to conduct and document inspections related to the construction of waterwastewater related infrastructure projects in the Santa Clarita CA area Essential Functions Represent the project owner in the field provide single point field inspection of the Contractors work Daily monitor and record contractors methods procedures and processes for compliance with the contract and prepare a comprehensive Daily Inspection Report with measurement of daily installed quantities and resources utilized Inspect the work for completeness and conformance with the plans specifications and applicable regulations and ordinances Assist the construction manager in developing as built drawings Document compliance and non compliance of completed work with established quality control and quality assurance processes and procedures Basic Qualifications High School diploma or equivalent education Strong written and oral communication skills Minimum of 3 years of inspection experience in the construction of water infrastructure projects ACIACPII CertificationsA thorough understanding of construction safety quality control and general contract management requirements is necessary Confined Space CertificationAn equivalent combination of related experience and technical training may be substituted Valid California Drivers LicensePreferred Qualifications Bachelor of Science degree in Civil Engineering or Construction ManagementCompensation The base hourly rate is 6596 and fringe benefits are 3535 as per the General Prevailing Wage Determination PWD issued by the Director of Industrial Relations httpswwwdircagovoprl2025 2PWDDeterminationsSouthernSC 023 63 2DpdfBenefits Health Insurance medical dental and vision Paid Time Off includes vacation and sick time Paid Parental Leave Program10 Paid Holidays 401k Plan company matching contributions up to 4Employee Referral Program MWH Constructors is a global project delivery company in heavy civil construction with a focus on water and wastewater treatment infrastructure With the ultimate goal of delivering maximum value to clients and their local communities MWH Constructors provides single source integrated design and construction services through a full range of project delivery methods Incorporating industry leading preconstruction and construction services the Companys multi disciplined team of engineering and construction professionals delivers a wide range of projects including new facilities infrastructure improvement and expansion and capital construction services Equal Opportunity Employer including disabled and veterans Please note that all positions require pre employment screening including drug and background check as a condition of employment LI JB1 LI Onsite

Job DescriptionQuality Inspector (Electronic) Reports To: Quality Manager Department: Quality Summary: The prime responsibility of the Quality Inspector is to maintain quality standards by inspecting and approving incoming materials, in process production, finished products, and recording quality results. Duties: Using established sampling standards, inspect and approve incoming materials, in process production, and finished products by confirming specifications, conducting visual and measurement tests, and rejecting unacceptable materials and/or products Document inspection results by completing reports and logs, summarizing reject results, and inputting data into quality database When in process production materials fail, determine which Operator(s) were involved and document results Comply with ESD and FOD requirements and report instances where ESD and FOD requirements are not met, to supervisor Operate inspection equipment (microscopes, calipers, etc.) Generate non-conformance reports Initiate corrective actions after approval from supervisor Complete work consistent with the Master Schedule Attend and effectively communicate in required meetings Other duties as assigned. Qualifications: Education/Experience: High school diploma or General Education Degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Prefer, 6 months prior experience inspecting electronic boards. Language Ability: Read and understand English. Math Ability: Good Math and analytical skills. Reasoning Skills: Able to Read and interpret written instructions and drawings. Supervisory Responsibilities: This job has no supervisory responsibilities. Additional Requirements: Familiar with inspecting electronic boards, components, etc. Familiar with counterfeit mitigation Able to read and understand written instructions and electrical drawings Familiar with use of measuring tools Must be extremely detail oriented Prefer, IPC Standards Knowledge Familiar with AS 9100/ISO 9001 requirements General PC Knowledge Familiar with manufacturing software (or able to become familiar with manufacturing software) used by the company. Physical Demands: The employee must regularly lift and/or move up to 10 pounds and occasionally lift and or move up to 15 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to talk or hear. The employee is regularly required to stand and walk. Must be able to work Four 10 hour shifts per week. Measures of Performance: Accurately inspects products; defects are caught before going to next in-process assembly Accurately records inspection results, with specific Operator(s) identified Communicates well with other personnel Attendance record Completes work within timeframes allotted from Master Schedule.