Inspector jobs in San Juan, PR

Job Title: CEI Inspector ***Work Location: San Juan, Puerto Rico *** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities : Monitor the contractor's on-site construction activities, performing inspections, and conducting field material sampling and testing to ensure conformance to project plans and specifications Conduct a wide variety of materials testing, construction inspections and monitoring of traffic controls. Perform field sampling and testing of soil density, concrete, asphalt and other construction materials Perform routine field tests in accordance with ASTM, ACI, AASHTO, GDOT or other standards Ensure quality assurance is maintained. Inspect contractor's traffic control during transportation construction project. Meets scheduling and attendance requirements. Understands and interprets schematic drawings to locate and record where sampling/testing was obtained. Understand and interprets construction documents and specification prepared in accordance with GDOT standards. Education/Experience: High School Diploma or bachelor's degree in Engineering, Construction Management or related discipline. 3+ years of related work experience in CEI, field inspections, materials testing, and traffic inspections. Proficient in both Spanish and English; must have excellent verbal and written communication in English and Spanish Experience in interstate transportation projects in urban areas. Understanding and familiarity with MUTCD and GDOT Design Guidelines and Standards preferred. Familiar with traffic control plans including but not limited to traffic shifts, detours, lane closures or other activities that disrupt traffic flow. Knowledge of the properties, characteristics, strengths, and weaknesses of the materials used in construction. ACI Concrete Field Testing Technician I, GDOT Concrete Certification preferred, Portable Nuclear Gauge user certification, RTT certification preferred Experience with concrete and pavement testing. Must have a valid driver's license and be insurable Physical Requirements: Physically mobile in and around construction sites and field assignments Ability to carry required instruments and equipment Ability to lift 50 pounds Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. The worker is subject to variable climate and environmental conditions including but not limited to extreme cold and heat. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Aguas, Buenas, Caguas, Cayey, Ceiba, Cidra, Canovanas, Culebra, Fajardo, Guayama, Guaynabo, Gurabo, Humacao, Las Piedras, Loiza, Luquillo, Maunabo, Naguabo, Patillas, Rio Grande, San Juan, San Lorenzo, Trujillo Alto, Vieques, Yabucoa Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

We are seeking an experienced CQV Lead to oversee the commissioning, qualification, and validation activities for packaging & inspection systems and related projects. The ideal candidate will manage all aspects of CQV execution while ensuring compliance with GMP requirements and industry standards. Key Responsibilities: • Lead and coordinate CQV activities for inspection equipment and systems • Develop and review commissioning, qualification, and validation documentation • Manage risk assessments and validation master plans • Oversee equipment qualification activities (IQ/OQ/PQ) • Interface with vendors, stakeholders, and quality teams • Review and approve validation protocols and reports • Ensure compliance with regulatory requirements and company standards • Mentor and guide CQV team members Requirements: • Bachelor's degree in Engineering, Science, or related field • 7+ years of CQV experience in pharmaceutical/medical device industry • Strong knowledge of GMP requirements and FDA regulations • Experience with inspection systems and equipment qualification • Strong technical writing and documentation abilities • Excellent communication and leadership skills **Weil Group is proud to be an Equal Employment Opportunity Employer.**

IEM is looking for a Full Time - Special Inspector who will work in Puerto Rico and shall be responsible for assessing special cases of work non-compliance and construction-related complaints or appeals. They will also assist in damage assessments requiring special engineering considerations for out of the ordinary conditions that may require specialized knowledge and attention to determine if repairs can or cannot be performed in a way that assures overall safety and integrity of the structures. Primary Location: * Live within a commutable distance to Isabela, Guaynabo or Ponce, PR. * Work in an Office Environment with a team. Travel Requirements: * This position may require travel to complete work assignments or attend meetings. Essential Functions: * Responsible for assessing special cases of work non-compliance and construction-related complaints or appeals. * Assists in damage assessment and scoping site walks requiring special engineering considerations for extraordinary conditions that may require specialized knowledge and attention to determine if repairs can or cannot be performed in a way that assures overall safety and integrity of the structure. * Perform a 2nd review to construction scopes previously approved by QA/QC team. * Lead construction milestone inspection process in coordination with PRDOH Construction Managers. * Review of Construction Milestone Inspections Pre-Inspection Packages and Reports. * Review Relocation Award HQS Inspection Reports. * Provide technical support on construction consultations or reconsiderations submitted by case management team. * Ensure all reconstruction or edification are in compliance with the last revision (2018) of the Puerto Rico Building Code. * In common accordance with the Safety Department, be part for the preparation of safety plans for construction critical activities. * Create policies and procedures for construction activities in compliance with the guidelines of the Puerto Rico CDBG-DR Program, Puerto Rico Housing Department and HUD. * Supervise all construction activities and follow up of complying with the completion dates. * Assist with construction process close outs. * Ability to do the following: * Maintain confidentiality of program information. * Apply the requirements, policies, and procedures of the disaster housing program. * Articulate details of the program in person, over the phone, and in written communication in a manner that is understandable by the client. * Use analytical skills to interpret and evaluate information. * Review technical documents in an efficient manner. * Performs other related duties as required and assigned. Minimum Qualifications: * Experience: Five (5) years of experience in local construction. * Degree: Bachelor's degree in engineering or architecture. * Bilingual: English and Spanish (oral and written). * Licensed Professional Engineer (PE) or Licensed Architect. * Membership: Active - Puerto Rico Professional College of Engineers and Land Surveyors. Additional Information: * Office Locations: Often, these offices are either owned by the client we work with or by IEM. All candidates are expected to follow any rules and regulations of the office in which they are required to work for that project. Benefits and more: * 10 paid Holidays * Vacation Pay * Sick Pay * 401 (K) plan with matching * Company paid STD and LTD Equal Employment Opportunity. All IEM employment decisions, including recruiting, hiring, placement, training availability, promotion, compensation, evaluation, disciplinary actions, and termination of employment, if necessary, are made without regard to an individual's race, color, religion, creed, sex (including sexual orientation, gender identity, and gender expression), national origin, ancestry, age, physical or mental disability, medical condition, genetic information, pregnancy (including childbirth and related medical conditions), marital status, military or veteran status, citizenship or immigration status, or any other characteristic protected under applicable law. Reasonable Accommodation. IEM is committed to providing reasonable workplace accommodations for individuals with disabilities. If you require assistance or reasonable accommodation during any part of the application or employment process, please email ************************* with specific details about the requested accommodation. All accommodation requests are reviewed case-by-case in compliance with applicable law.

Job Description QA/QC Site Inspector- Construction Reports to: Site Manager The Site Inspector - QA/QC will be responsible for ensuring that all construction and operational activities at generation sites meet the highest quality standards and comply with regulatory requirements. This role involves conducting regular inspections, documenting findings, and collaborating with project teams to address any quality issues. Key Responsibilities: Perform regular inspections of construction and operational activities at generation sites to ensure compliance with quality standards and regulatory requirements. Document inspection findings, prepare comprehensive reports, and recommend corrective actions to address deficiencies. Maintain detailed and accurate records of inspections, findings, and implement corrective actions for quality assurance purposes. Collaborate with project managers, engineers, and contractors to identify, address, and resolve quality-related issues. Verify that materials, equipment, and workmanship adhere to project specifications, industry standards, and quality benchmarks. Ensure strict compliance with safety protocols and environmental regulations throughout all phases of the project. Provide technical expertise and guidance on quality control procedures, standards, and best practices to project teams. Participate in project meetings and deliver updates on quality control status, including identified issues and resolution progress. Qualifications: Education: Bachelor's degree in Engineering, Construction Management, or a related field preferred. Experience: Minimum of 3-5 years of experience in a similar role. Skills: Extensive knowledge of quality assurance and control principles, particularly in construction sites. Proficiency in using quality management tools and software for inspection reporting and documentation. Ability to read and interpret blueprints, technical drawings, and specifications to ensure compliance with standards. Strong attention to detail with excellent problem-solving and organizational skills. Effective communication and interpersonal abilities to collaborate with project teams and stakeholders. Proven experience conducting construction site inspections and documenting findings. Commitment to safety and environmental compliance in all activities. Strong time management skills to prioritize tasks effectively in dynamic environments. Certifications: Required: Valid Driver's License. Preferred: Certified Construction Quality Inspector (CCQI), Certified Quality Auditor (CQA), OSHA 30-Hour Construction Safety Certification. Language: Proficiency in both English and Spanish is mandatory. Working Conditions: Full-time position, with travel to project sites as required. The position may involve working in office and field environments, with a focus on construction sites. Ability to work on-site and in potentially challenging outdoor conditions during installation and construction phases. Primary functions require sufficient physical ability and mobility to work in an office setting; to stand or sit for prolonged periods of time; to occasionally stoop, bend, kneel, crouch, reach, and twist; to lift, carry, push, and/or pull light to moderate amounts of weight; make repetitive hand movement and fine coordination in the performance of daily duties; to travel to other locations using various modes of private and commercial transportation; and to verbally communicate to exchange information. BENEFITS: Comprehensive health insurance, 401K, Paid Time Off (PTO), and bonus incentives. Commitment to Diversity: We are an equal-opportunity employer, dedicated to fostering a diverse and inclusive workplace. For more about DCMC Partners, please visit our website at dcmcpartners.com/careers. Job Posted by ApplicantPro

Job Description Validation & Engineering Group, Inc. (V&EG) is a leading services supplier who provides solutions for the Pharmaceutical, Biotechnology, Chemical, Food, and Medical Devices industries in the following areas: Laboratory, Compliance, Computer, Engineering, Project Management, Validation, and other services. We are seeking a talented, dedicated individual committed to work under the highest ethics standards for the following position: The C&Q Lead - Inspection Lines oversees and coordinates all Commissioning and Qualification activities for visual inspection systems used in sterile drug product operations, including both manual and automated inspection technologies. This role ensures equipment, control systems, and supporting utilities are qualified in compliance with regulatory standards (FDA, EMA, Annex 1) and ready for GMP use at site start-up. Key Responsibilities Project Leadership & Planning Lead end-to-end C&Q scope for automated and semi-automated inspection lines, including: Vision systems for vial, syringe, and cartridge inspection Conveyance and reject mechanisms Integration with MES / SCADA / Serialization systems Container closure integrity test (CCIT) systems Develop and maintain the Inspection C&Q Master Plan, aligning with the overall site Validation Master Plan. Coordinate activities across Engineering, QA Validation, Automation, and Manufacturing Operations. Establish and monitor C&Q milestones for inspection systems to meet project timelines and regulatory readiness. Commissioning & Qualification Execution Oversee preparation, review, and approval of URS, FAT/SAT, IOQ protocols, and summary reports. Ensure equipment and vision systems meet GAMP 5, 21 CFR Part 11, and data integrity standards. Manage vendor FAT/SAT and site integration testing; ensure punch-list closure. Supervise execution of C&Q protocols in accordance with ASTM E2500 and ISPE Baseline guides. Maintain traceability between design requirements and executed testing. Technical Oversight Serve as Subject Matter Expert (SME) for vision inspection and serialization systems. Review and approve: Vision and camera configuration documentation Control system design (PLC, HMI, SCADA, MES interfaces) CCIT and reject logic configuration Troubleshoot technical issues and support automation integration with packaging and filling operations. Compliance & Documentation Ensure C&Q documentation aligns with GMP, GDP, and corporate validation standards. Support Quality Assurance during audits and regulatory inspections. Ensure all deviations, CAPAs, and change controls related to C&Q are properly documented and closed. Maintain digital records in the validation platform (e.g., Kneat or ValGenesis). Collaboration & Leadership Work closely with Process Engineering, Packaging, and QA Validation to ensure seamless qualification and handover. Mentor junior C&Q engineers assigned to inspection or packaging areas. Participate in daily coordination and readiness meetings to track progress and resolve issues proactively. QualificationsEducation Bachelor's degree in Engineering (Mechanical, Electrical, Automation, or related field). Experience 8+ years of experience in Commissioning & Qualification for pharmaceutical or biotech facilities. 3+ years specific to automated visual inspection or packaging systems. Experience in aseptic operations and data integrity requirements (GAMP 5, 21 CFR Part 11). Strong understanding of Annex 1 and ISPE GPG: Visual Inspection of Parenterals. Technical Competencies Knowledge of camera systems, vision software, reject mechanisms, serialization, and MES connectivity. Proficient in using electronic validation tools such as Kneat or ValGenesis. Skilled in reviewing FAT/SAT documents, IOQ protocols, and risk assessments. Preferred Previous experience qualifying inspection lines from Syntegon, Antares, Brevetti, or Seidenader. Knowledge of CCIT methods (vacuum decay, laser headspace, or HVLD). Experience in greenfield or expansion projects for aseptic/sterile operations.

Adecco está asistiendo a una reconocida manufactura de productos para sellado de techos y otras superficies en el reclutamiento de un Inspector de Servicio **en Bayamon, Puerto Rico** . Esta es una oportunidad de asignación "T **emp to Hire".** ¡Solicite ahora si usted cumple con las cualificaciones enumeradas a continuación! Disponibilidad para trabajar en el siguiente horario: 7:00 am a 4:00 pm **(Primer Turno)** Días de trabajo: **lunes a viernes y sábados alternos** Salario: **$15.00 por hora** Responsabilidades y requerimientos: + Experiencia previa relacionada al puesto + Bachillerato completado + Licencia de conducir vigente de Puerto RicoSolicite Ahora para ser considerado/a para este trabajo o cualquier otra oportunidad relacionada con Adecco. **Pay Details:** $15.00 per hour Benefit offerings available for our associates include short-term disability and additional voluntary benefits including medical, dental, vision, life insurance, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave and Vacation Leave or any other paid leave required by Federal, State, or local law where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance

We are an Engineering Consulting Firm that provides specialized technical services to the Pharmaceutical, Biotechnology, and Medical Device industries throughout Puerto Rico. Our team delivers innovative, compliant, and efficient solutions that support our clients' operations and regulatory goals. We are seeking a Part-Time Project Inspector with strong civil/structural engineering expertise to support a major structural and facility improvement project. Position: Project Inspector - Civil/Structural (Part-Time) Reports To: Project Manager / Director of Operations Location: Juncos, PR Employment Type: Part-Time - Project-Based Role Licensing: Professional Engineer (PE) Required Preferred: Engineer-in-Training (EIT) or Structural Specialty Position Summary The Part-Time Project Inspector is responsible for conducting field inspections, construction oversight, structural verifications, and compliance assessments for a large-scale structural/facility improvement project in a regulated environment. This position requires a licensed Professional Engineer (PE) in Civil Engineering (Structural emphasis preferred). The Project Inspector ensures construction activities meet approved engineering drawings, structural designs, codes, and safety standards. Because this is a part-time position, work hours will be defined based on construction phases, inspection needs, contractor schedules, and project milestones. Key ResponsibilitiesConstruction & Structural Inspection Perform part-time field inspections of civil/structural and facility improvement work. Verify construction adherence to approved drawings, calculations, codes, and specifications. Inspect concrete foundations, rebar, steel structures, supports, anchors, and structural assemblies. Observe installation of utilities, platforms, structural penetrations, and load-bearing components. Identify non-conformities, deviations, deficiencies, and unsafe conditions. Compliance & Engineering Review Ensure compliance with applicable structural codes (IBC, ACI, AISC, ASCE), OSHA construction rules, and project specifications. Review submittals, RFIs, shop drawings, and technical documents related to civil/structural scope. Provide technical guidance to the Project Manager and engineering team based on field observations. Support verification of contractor compliance with engineering and quality standards. Documentation & Reporting Prepare inspection reports, daily/weekly logs (as needed), photographs, and non-conformance reports. Document all structural-related observations, deficiencies, and progress. Assist with punch lists and turnover documentation for structural components. Coordination & Communication Communicate inspection findings clearly to contractors, engineers, and project leadership. Participate in project meetings as required. Coordinate inspection scheduling with contractors, quality teams, and client representatives. Support resolution of construction or structural issues identified during inspections. Required Qualifications Professional Engineer (PE) License - REQUIRED in Civil/Structural Engineering. Bachelor's degree in Civil Engineering or Structural Engineering. 3-7+ years of experience in structural inspection, civil engineering, or construction oversight. Experience working with structural plans, calculations, and engineering specifications. Ability to perform inspections in active construction environments. Strong knowledge of structural codes, construction materials, and safety requirements. Excellent communication skills in English and Spanish. Ability to prepare clear and detailed inspection reports. Preferred Qualifications Engineer-in-Training (EIT) or Structural specialization preferred. Experience working in pharmaceutical or other regulated industries. Experience in facility upgrades, structural modifications, or capital projects. Experience performing structural assessments and field verifications. Familiarity with construction workflows and project coordination. Skills & Competencies Structural and civil engineering knowledge Construction field inspection Code interpretation & compliance Documentation & reporting Critical thinking & problem solving Safety awareness Communication & stakeholder interaction Technical analysis Physical, Mental & Environmental Requirements Ability to walk construction sites, climb stairs, and access elevated structures. Ability to work outdoors or in industrial environments. Flexibility to work part-time hours based on project needs. Ability to carry inspection tools and equipment as required.

Job Title: Construction Inspector - Airfield/Aviation Job Type: Full-Time Candidate MUST HAVE A VALID P.E. License We are seeking a detail-oriented and experienced Construction Inspector - Airfield to join our team, primarily serving projects throughout Puerto Rico. In this role, you will be responsible for inspecting and reviewing a wide range of airfield construction activities to ensure compliance with project specifications, codes, and quality standards. The ideal candidate will have a solid background in airfield or transportation construction and a proactive, team-oriented mindset. Key Responsibilities: Perform on-site inspections of construction activities in accordance with approved drawings, specifications, and applicable codes. Monitor contractor and subcontractor work to ensure adherence to plans, schedules, and safety protocols. Document construction progress, quality assurance measures, and field testing results. Prepare and maintain detailed daily inspection reports (IDRs) and status updates for stakeholders, including owners and funding agencies. Participate in field meetings and inspections related to airfield improvements and permitting. Measure quantities and support the preparation of quantity verification (CQV) reports for payment and change orders. Identify, record, and report deviations from contract documents, proposing corrective actions where appropriate. Maintain clear and professional communication with project teams, contractors, and clients regarding project status and compliance issues. Promote and maintain a safe work environment on all project sites. Support flexible work schedules including day/night shifts and weekends as needed to meet project demands. Qualifications: High school diploma or equivalent required; additional education or training preferred. Minimum of 3+ years of experience inspecting airport or transportation construction projects. Familiarity with inspection of asphalt paving, concrete work, earthwork, airfield lighting, signals, and structural components. Knowledge of FAA and DOT construction methods, standards, and specifications preferred. Ability to interpret complex airfield construction plans and specifications. Strong understanding of construction means and methods, safety practices, and engineering principles. Proficiency in Microsoft Office Suite (Word, Excel, Outlook); experience with Procore or similar construction management software preferred. Strong mathematical skills for calculating distances, areas, and volumes. Excellent written and verbal communication skills. Familiarity with codes, regulations, and best practices related to airport operations and construction compliance. Skills & Competencies: Strong organizational and time management skills. Ability to work independently and collaboratively with clients, team members, and contractors. Ability to manage multiple priorities under tight deadlines with minimal supervision. Discretion and professionalism in handling confidential client information. Attention to detail with high standards for documentation and reporting accuracy. Licensure & Requirements: Valid and Current Professional Engineer (PE) Licensure Valid driver's license and clean driving record. Ability to obtain necessary security clearances for airside access and U.S. Customs and Border Protection (CBP) clearance. If you're a reliable, experienced inspector with a passion for quality and safety in airfield construction, we'd love to hear from you!

As an on -site Solar Quality Inspector, you will be responsible for ensuring that every Prosolar photovoltaic system is built and delivered in full compliance with the current Electrical Code, while keeping the installation clean, orderly, and aligned with the company's internal standards. From the pre -construction stage, you will review electrical drawings, materials, and data sheets to verify that everything meets NEC requirements; during installation, you will check torque values and the proper fastening of structures. You will also handle equipment programming and perform any necessary repairs. With your expertise, you will guarantee optimal project operability and complete customer satisfaction. Key Responsibilities ● Document findings, non -conformities, and opportunities for improvement. ● Perform quality inspections on solar installation projects. ● Develop and update quality procedures and checklists. ● Support design reviews to ensure the constructability and maintainability of the photovoltaic system. Requirements● Minimum of 2 years of experience in quality assurance or technical supervision on electrical, construction, or renewable energy projects. ● Ability to read electrical plans and technical specifications. ● Knowledge of NEC, OSHA, and applicable Puerto Rico building codes. ● Proficiency with computer programs and work tools. ● Valid driver's license in Puerto Rico. ● Bilingual (Spanish and English) ● Electrical knowledge. Benefits Health Insurance 401K Paid Holidays 15 days of vacation 12 sick days

Description/Responsibilities: The Quality Assurance Inspector l is responsible to provide general quality assurance support in the areas of inspection manufacturing and assembly. Performs mechanical, electrical and visual inspection of manufactured product and/or processes per documentation (drawings, specifications and procedures) and industry standards. Freedom to act, under supervision, in semi-structured assignments that requires adherence to defined procedures and/or specific, detailed instructions with limited originality, Solves problems of limited scope and com complexity. Demonstrates Viant values. Position Authority: This position has the authority to accept or reject materials, subassemblies, assemblies and processes that affect the quality and safety of products. This includes the authority to stop production if necessary to assure that nonconforming products are not released for distribution. Essential Functions: Follows all Good Manufacturing Practices and SOP's as defined by Viant's policies, practices and procedures to ensure that FDA regulations, GMP, ISO13485, and Viant quality standards are met. Checks material disposition and identification in order to meet GMP regulations. Inspect and document in-bound raw materials for conformance. Collects samples at scheduled intervals from each machine. Perform in process dimensional and visual inspection to assure compliance with customer specification giving appropriate disposition according to Viant's procedures. Responsible for documentation of (in-process) sampling plan, disposition and inspection results Perform basic ERP transactions. Work on validation projects as needed. Manage retains of production and validation projects. Audits assigned areas. Verifies that the process inspections and areas in charge are in conformance with Viant's procedures. Perform SPC/SQC as a preventive tool using suitable software to assure and maintain compliance with customer requirements and Viant's procedures. Maintain documentation filling update. Accurately record information consistent with the department format. Support the calibration of gaging and equipment Train operators in products quality requirements. Report any defect found to Manufacturing and/or Quality Supervisor. Provide feedback to employees on defects found for ensure quality of our product. Place non-conforming product on hold and create non-conforming records Conduct quality inspection on rework product Follow all departmental procedures with respect to routine daily assignments. All workstation areas will be maintained in a neat and orderly manner. Ensures efficient material flow, storage of inspected parts, and accurate inventory transactions are maintained with the ERP system. Skills: Proficient in knowledge of a variety of testing equipment (pin gauges, snap gauges, micrometer, caliper, etc.). Ability to interpret component specifications, drawings and quality procedures. Proficient technical writing skills and use of documentation programs (e.g., Office Windows, Excel, Access, PowerPoint, etc.) Performs basic arithmetic calculations: add, multiply, subtract, and divide in all units of measure using whole numbers, common fractions and decimals. Requires the ability to adjust a microscope e lens to bring an object into sharp focus. Physical Requirements: Light physical activity performing non-strenuous, day-to-day activities of a primarily productive nature. Moderate lifting (20 lbs.), carrying (10 lbs.), bending, and prolonged sitting. Manual dexterity sufficient to reach/handle items, work with fingers, and perceive attributes of objects and material. Intensive handwork. Requires the ability to identify and distinguish colors and shapes. Well-lighted, air-conditioned, indoor production setting with adequate ventilation. Equipment Used: Mechanical and electrical teste equipment, calipers, gauges, and standard office computer. Utilize tools, gauges and other inspection equipment to obtain product specification data. Qualifications: Associates degree or equivalent in work experience. Bachelor Degree in Natural Sciences preferable. English understanding, quality oriented and statistical knowledge. 3 months to 1 year of recent experience in medical device industry, with experience of different medical products with as molding operator.

Quality Support Team Inspector Organization: Lufthansa Technik Puerto Rico (LTPR) Department: Quality Responsible to ensure maintenance standards are secured through aircraft close, final, Defect buybacks, and RII inspections. Ensures maintenance standards are improved by identifying and suggesting improvement opportunities Essential Responsibilities Ensure progress is made on the aircraft in line with the project network plan and given targets. Perform close, Final, Defect Buyback, and RII inspections. Develop an inspection schedule with team leaders, Project Manager, and customer during inspection phase. Perform surveillance activities using customer's and LTPR's checklists. Record inspection findings and surveillance activities. Analyze inspection findings and propose continuous improvement initiatives and training. Assist or perform Aircraft CRS Perform in-process inspection on aircraft undergoing repair, overhaul, or alteration to assure compliance with specifications and procedures and with accepted quality standards and practices. Accomplishes final inspections on aircraft to confirm the completeness of the work done is aligned with manufacturer specification. Ensure all work Performed by Production or required to be performed have been signed for and no defect exist that would render the aircraft unairworthy Performed inspection on component changes, test and adjustment on airframe and powerplant systems consistent with good quality practices and to the requirements of the appropriate Aircraft Maintenance Manual Perform inspection on structural repairs and modifications to ensure compliance to good quality practice and to the requirements of the manufacturer Structural Repair Manual (SRM) or any other approve data. Performs Surveillance inspections and Spot Check. Document noted discrepancies on company control forms and follow-up to ensure all the noted anomalies have been corrected. Records/documents discrepancies and conditions or operation malfunctions for correction, adjustment, or repair; evaluates defects and prescribe corrective actions on any discrepancies discovered during inspection. Complete Service Difficulty Report (SDR) for any major incident Complete 337 Report for customers and the Federal Aviation Administration (FAA) Other Responsibilities Maintains working area clean and organized. Comply and ensure compliance with company policies, procedures, local and federal regulations. Perform other tasks and projects, as requested. Ensure adherence to compliance culture requirements. Education, Skills, and Competencies Technical university degree in aviation A&P Certificate License Minimum 3 years' experience in commercial aircraft maintenance of which minimum 18 months A320 family experience A320 family 80-hour General Familiarization course desired Involvement in aircraft maintenance for at least 6 months in the last two years Knowledge of FAA regulations Computer applications experience Ability to lead and motivate teams and individuals. Ability to work under pressure and to meet demanding deadlines. Strong interpersonal and leadership skills Good communication skills Excellent organizational skills Ability to work under pressure and demanding deadlines. Fluent in English and Spanish (both written and spoken) This job description reflects management's assignment of essential functions; it does not exclude or restrict the tasks that may be reasonably assigned.

Join a team of ever-growing professionals who look to make a difference on projects both domestically and internationally. Our organization is growing, and we believe your career should too! Build your future with Project Solutions, Inc. Position/Project Overview: Project Solutions Inc. is seeking a qualified Construction Inspector to support the U.S. Forest Service La Mina Trail Reconstruction Project within El Yunque National Forest near Río Grande, Puerto Rico. This federally funded project involves the reconstruction and rehabilitation of the historic La Mina Trail, a 0.73-mile steep mountain path featuring 11 pedestrian bridges, 35 stair systems, retaining walls, and concrete structures damaged by previous storm events. This role is contingent upon award of project. Responsibilities and Duties: Verify construction work, materials, and methods comply with all contract drawings and specs. Identify deficiencies and immediately notify the Contracting Officer (CO) of non-compliant or unsafe work. Perform daily field inspections and hike the full La Mina Trail while documenting progress and site conditions. Maintain required contract files and prepare accurate daily diaries. Review submittals, schedules, and contractor-provided documents for compliance before work proceeds. Monitor labor, equipment, safety practices, and federal labor/wage compliance. Report differing site conditions, archeological finds, and any required corrective actions to the CO. Maintain professional communication with the contractor without directing their means or methods. Provide clear written reports and updates to the CO to support oversight, payment, and final acceptance. Required Education, Knowledge and Skills: Minimum 5 years of experience in the field of architecture, engineering, and/or construction performing quality assurance and inspection services. Ability to communicate effective both orally and in writing. Knowledge of concrete work, rebar layout, retaining walls, gabions, shoring, erosion control, and related field standards prefferd . Experience in preparing correspondence, written reports, and briefing clients and management personnel. Familiarity with federal construction procedures, documentation requirements, and FAR compliance. Physically able to hike the entire La Mina Trail daily (0.73 miles, 468-ft elevation change, steep, narrow, wet terrain). Comfortable working in remote, rugged rainforest conditions with limited utilities or cell coverage. Knowledge of local and national codes. Knowledge of construction means and methods. Ability to interpret Architectural/Engineering plans and specifications. Familiarity with modern construction products (quality, uses, and applications). Knowledge of commonly utilized construction management software. OSHA 30-hour construction safety training preferred. Ability to maintain a valid driver's license. What Does PSI Offer You? Three options for medical plans plus dental and vision insurance offerings 24/7 healthcare access to telehealth services for your convenience HSA Company life insurance options for you and your family Short-term and long-term disability offerings PLUS an $800 monthly allowance is provided to offset your PSI insurance premium costs 401(k) with a 4% employer match Generous PTO, paid-federal holidays, and sick leave Always the opportunity for professional development The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. Benefit offerings subject to change. Project Solutions, Inc. is an equal opportunity employer, women, individuals with disabilities, protected veterans and minorities are encouraged to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. EEO/M/F/Vets

The candidate will be supervised by a Professional Engineer. This position involves the basic application of civil engineering knowledge gained through education and limited work experience. Provides technical skills to support operational decisions made by other; implements engineering principles to develop and execute plans, monitors projects and supports licensed professional engineers to deliver projects and programs on time, on budget and within scope. Will provide support to oversight and inspect to ensure adherence to designs, plans, specifications, codes, schedules, and standards. Candidate is responsible for maintaining harmonious relations with contractors, consultants, internal and external engineers, and other stakeholders. Work will be performed under the close supervision of a licensed professional engineer. Work will be reviewed for accuracy, quality, and conformance with prescribed procedures by a licensed professional engineer. The nature of the work allows for limited independence of action and judgement in determining engineering requirements and ensuring work is completed by consultants, contractors, or civic staff in accordance with agreed to processes, plans, contracts, and standards. Typical Duties May carry out routine technical surveys or inspections and prepare reports in accordance with established policies and plans. Ensures all project documents are in accordance with the project management policies, processes, and procedures, as well as regulatory requirements. Performs routine site inspections of the work for conformance with engineering drawings, specifications, and codes. Inspects for substantial performance and construction completion, ensure completion of work; monitor and report on any variance, alterations, and deficiencies to the Project Manager. Monitors corrective actions. Keep daily log of all construction. Takes photos of all phases of construction. Prepares daily inspection reports. Ensures that the project abides by any applicable Health and Safety Standards and Guidelines. Ensures the highest standards of performance are maintained according to the safety program. Manage and oversee documents for federal program compliance. Timely, accurately, and efficiently prepare and manage project's documents. Knowledge, Abilities and Skills Knowledge of the technical and engineering principles and practices related to the work assignments. Knowledge of applicable by laws, standards and regulations pertaining to work; including relevant codes, standards, regulations, policies, and procedures. Awareness of limitations due to potential professional liability that could be a conflict of interest. Ability to meet and deal effectively with contractors, developers, and the public, and ensure compliance with the rules and regulations. Ability to communicate verbally and in writing with preciseness and accuracy. Ability to read, interpret design plans, drawings, reports, specifications, diagrams, and charts of a routine technical nature. Physical ability to perform outside work in all types of weather and areas related to the work assignments. Ability to apply technical computer software to a wide variety of applications including the design, costing, and scheduling of projects, as well as the development of routine models and generation of reports. Ability to create accurate and complete job hazard analysis, site reports and other written documentation. Good documentation quality control and assurance skills Requirements Completion of a degree in civil engineering. Field and related experience in construction project management, site inspections and\/or project documentation control. Knowledge of relevant codes in the area of specialization. Current registration as and EIT in Puerto Rico and working towards a PE is a requirement. Also, candidate must possess a valid driver license. "}}],"is Mobile":false,"iframe":"true","job Type":"Tiempo completo","apply Name":"Apply Now","zsoid":"664728484","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Construcción"},{"field Label":"Work Experience","uitype":2,"value":"1\-3 años"},{"field Label":"City","uitype":1,"value":"Guayanilla"},{"field Label":"State\/Province","uitype":1,"value":"Guayanilla"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"00656"}],"header Name":"Junior Engineer \- Construction Inspector","widget Id":"451563000000072311","is JobBoard":"false","user Id":"451563000000195003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"451563000002272003","FontSize":"12","location":"Guayanilla","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

Accept parts per drawing or quality specifications. Audit process compliance with quality records and procedures Inspect material, subassemblies and rejects parts using procedures, specifications engineering drawings, performs audits or JIS, procedures, certified operations. Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports. Define problems, collect data, establish facts, and draw valid conclusions Interpret an extensive variety of technical instructions in mathematical or diagram form and deal with abstract and concrete variables. **Associate or Technical Degree** preferred Minimum 1 year **experience** in a manufacturing environment. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here (********************************************************************* for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Why Kelly Engineering? Your engineering skills are in demand, but how do you find the right fit? Easy. At Kelly Engineering, our team creates expert talent solutions to solve the world's most critical challenges. We connect you with leading organizations where you can collaborate on innovative projects, work with cutting-edge technologies and accelerate your growth. Whether you prefer the variety and flexibility of short-term projects or are looking for a long-term opportunity, we're here to guide you to the next step in your engineering career. About Kelly Work changes everything. And at Kelly, we're obsessed with where it can take you. To us, it's about more than simply accepting your next job opportunity. It's the fuel that powers every next step of your life. It's the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California's state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly Services is proud to be an Equal Employment Opportunity and Affirmative Action employer. We welcome, value, and embrace diversity at all levels and are committed to building a team that is inclusive of a variety of backgrounds, communities, perspectives, and abilities. At Kelly, we believe that the more inclusive we are, the better services we can provide. Requests for accommodation related to our application process can be directed to Kelly's Human Resource Knowledge Center. Kelly complies with the requirements of California's state and local Fair Chance laws. A conviction does not automatically bar individuals from employment.

Are you in search of a flexible work schedule? Are you interested in earning additional income with potential for growth? Do you prefer working outdoors rather than confined to an office or warehouse? requires travel from location to location. Quiktrak is looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories or property condition assessments. When you partner with Quiktrak, you are collaborating with experienced professionals dedicated to delivering exceptional customer experiences since 1991. Over the years, we have expanded our business to become one of the industry's largest players, offering floorplan audits, data collection, inspection services, and business growth opportunities for our contractors. For more information, please visit our website: Inspecting the world one asset at a time. | Quiktrak, LLC Our most successful Inspectors share common traits such as resourcefulness, discipline, a strong work ethic, meticulous and the ability to persevere through challenges. If this description resonates with you, we encourage you to apply today. Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfortable working outdoors in various weather conditions Access to a recent smartphone or tablet to execute jobs while on site. Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Capability to stand and walk continuously for up to seven and a half hours Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours. License/Certification: Driver's License (Required) "United States Applicants Only"

Job Description QA/QC Site Inspector- Construction Reports to: TBD The Site Inspector - QA/QC will be responsible for ensuring that all construction and operational activities at generation sites meet the highest quality standards and comply with regulatory requirements. This role involves conducting regular inspections, documenting findings, and collaborating with project teams to address any quality issues. Key Responsibilities: Perform regular inspections of construction and operational activities at generation sites to ensure compliance with quality standards and regulatory requirements. Document inspection findings, prepare comprehensive reports, and recommend corrective actions to address deficiencies. Maintain detailed and accurate records of inspections, findings, and implement corrective actions for quality assurance purposes. Collaborate with project managers, engineers, and contractors to identify, address, and resolve quality-related issues. Verify that materials, equipment, and workmanship adhere to project specifications, industry standards, and quality benchmarks. Ensure strict compliance with safety protocols and environmental regulations throughout all phases of the project. Provide technical expertise and guidance on quality control procedures, standards, and best practices to project teams. Participate in project meetings and deliver updates on quality control status, including identified issues and resolution progress. Qualifications: Education: Bachelor's degree in Engineering, Construction Management, or a related field preferred. Experience: Minimum of 3-5 years of experience in a similar role. Skills: Extensive knowledge of quality assurance and control principles, particularly in construction sites. Proficiency in using quality management tools and software for inspection reporting and documentation. Ability to read and interpret blueprints, technical drawings, and specifications to ensure compliance with standards. Strong attention to detail with excellent problem-solving and organizational skills. Effective communication and interpersonal abilities to collaborate with project teams and stakeholders. Proven experience conducting construction site inspections and documenting findings. Commitment to safety and environmental compliance in all activities. Strong time management skills to prioritize tasks effectively in dynamic environments. Certifications: Required: Valid Driver's License. Preferred: Certified Construction Quality Inspector (CCQI), Certified Quality Auditor (CQA), OSHA 30-Hour Construction Safety Certification. Language: Proficiency in both English and Spanish is mandatory. Working Conditions: Full-time position, with travel to project sites as required. The position may involve working in office and field environments, with a focus on construction sites. Ability to work on-site and in potentially challenging outdoor conditions during installation and construction phases. Primary functions require sufficient physical ability and mobility to work in an office setting; to stand or sit for prolonged periods of time; to occasionally stoop, bend, kneel, crouch, reach, and twist; to lift, carry, push, and/or pull light to moderate amounts of weight; make repetitive hand movement and fine coordination in the performance of daily duties; to travel to other locations using various modes of private and commercial transportation; and to verbally communicate to exchange information. BENEFITS: Comprehensive health insurance, 401K, Paid Time Off (PTO), and bonus incentives. Commitment to Diversity: We are an equal-opportunity employer, dedicated to fostering a diverse and inclusive workplace. For more about DCMC Partners, please visit our website at dcmcpartners.com/careers. Job Posted by ApplicantPro

Experience: Technical School graduate or associate degree and a minimum of 3 years of experience in similar tasks. Primary Function: The Quality Assurance Inspector II is responsible for inspecting raw materials, parts, and/or finished products on production lines. They document any deviations according to product specifications and established quality standards. The role requires adherence to safety regulations, quality standards, and company policies and procedures. Main Tasks: Inspect raw materials, parts, and/or finished products to ensure compliance with product specifications and quality standards. Identify and document any defects in non-conforming material and generate the necessary documentation following the procedures established by the Quality System and the company. Inspect and document critical dimensional and cosmetic characteristics in accordance with corporate standards, product specifications, and/or established deviations (finished product and/or sub-assembly). Maintain updated inspection files following company procedures. Use precision and measuring instruments to verify parts and their components. Ensure compliance of measuring and testing instruments according to the Calibration Program parameters. Perform inventory-related transactions following established procedures. Conduct visual inspections on the production line to ensure optimal operation. Develop operational procedures and methods as required. Notify the immediate supervisor of any deviation or abnormality detected versus established quality standards. Participate in and document the results of audits of finished products and/or processes (LPA, ISO, Quality, etc.) following company formats. Audit compliance with the Torque Program on production lines. Refer any product or process abnormality to the immediate supervisor or designated personnel. Keep work areas clean and report unsafe conditions that may affect employee safety. Ensure workplace safety and compliance with established rules and procedures. Comply with health, safety, and environmental standards and procedures. Actively participate in departmental meetings to discuss operational and/or administrative aspects of the company. Comply with the rules, policies, and procedures established by the Human Resources department and the company. Competencies/Knowledge: Intermediate knowledge of product and/or process inspection. Ability to read and interpret schematics/blueprints. Knowledge of multiple operational processes. Intermediate-level math skills. Basic knowledge of calibration. Knowledge related to quality and ISO 9001. Ability to operate Windows-based systems. Technical knowledge in health and safety. Knowledge of audits. Ability to plan daily tasks. Intermediate-level statistical knowledge. Intermediate English proficiency. Reading and writing - intermediate level **Pay Details:** $12.75 to $13.50 per hour Benefit offerings available for our associates include short-term disability and additional voluntary benefits including medical, dental, vision, life insurance, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave and Vacation Leave or any other paid leave required by Federal, State, or local law where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Mayaguez, Aguadilla, Aguada, Isabela, Moca, San Sebastian, Rincon, Anasco, Quebradillas, Las Marias, Mayaguez, Camuy, Lares, Maricao, Hormigueros, Cabo Rojo, San German, Lajas, Sabana Grande, Guayanilla, Guanica, Yauco Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position