Inspector jobs in Tustin, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Fenagh Engineering and Testing is seeking a CWI Inspector with NDT to perform inspections for the shop/field. To include the following: audits, inspecting structural steel fabrication and erection, material identification, welding to include joint fit-up, in-process welding, completed welding, MT & UT as required by code, and high-strength bolting inspections. Ideally this candidate will be an AWS CWI with either their Level I or Level II UT/MT certification from an ASNT Level III. Evaluation from our Level III for both UT (shear wave)/MT will be conducted upon hiring. The position will be supporting clients in the Los Angeles area. ICC / CWI / NDT - MT & UT Level II General Responsibilities: Perform observation and inspection in the shop & field. Collect MTR's for heat numbers and tracking. VT on members in progress. UT CJP's as needed. MT Fillet Welds as needed. High-strength bolting inspections & tests. Compile daily reports outlining inspections and reporting deficiencies (if any). Read and understand specific project plans and specifications. Communicate with project team regarding project requirements and inspection results. Requirements: AWS CWI Certification Level I or Level II UT (Shear wave). Level I or Level II MT. ICC Structural Steel & Bolting. Minimum 5 years of experience. High School Diploma or equivalent. General computer knowledge (Excel, Word, PDF). Able to travel to various locations. Benefits include company paid holidays, sick days, 2 weeks paid vacation, 100% health insurance premium, matching 401k plan. Salary is negotiable according to experience. We have a great culture defined as: Detail-oriented -- quality and precision-focused. Innovative -- innovative and risk-taking. Outcome-oriented -- results-focused with strong performance culture.

D'Leon Consulting Engineers is seeking a Construction Inspector in Los Angeles, CA. Responsibilities Perform inspection of runway and taxiway construction activities including FAA P-501 PCCP slip form and side form paving operations, ensuring compliance with specialized concrete paving equipment practices, vibration setup, paver speed, screed inspection, finishing, and surface treatment requirements. Conduct comprehensive inspections of FAA P-401 asphalt placement and compaction activities, including air-void testing, surface defect repair, release agent application, and cold milling, patching, profiling, and grade correction operations. Inspect installation and testing of FAA P-201 base material and P-306 lean concrete base systems, including earthwork operations, soil import/export activities, subgrade preparation, and temporary erosion and drainage control setup and compliance. Apply extensive knowledge of FAA active airfield work rules and protocols, including barricades, fencing, lighting, signage, pavement markings, FAA 7460 compliance, and vehicle service road requirements for both reflective and non-reflective runway/taxiway signage systems. Ensure compliance with FOD controls and active airfield protocols, including dust control, sweeping procedures, airport security and escorting protocols, and FAA vehicle marking/identification requirements across all operational areas. Inspect FAA airfield lighting systems including taxiway edge, centerline, TDZ, hold bar, and status lights, ensuring proper series circuits and regulator functionality throughout all installation phases. Coordinate opening and closing of active runways and taxiways using proper radio protocol and multi-group coordination procedures, maintaining operational safety and efficiency standards. Prepare detailed daily inspection reports with comprehensive mapping, video/photo documentation, and accurate quantity tracking that clearly documents construction activities, deficiencies, and compliance issues in a timely manner. Perform batch plant inspections for both PCCP and asphalt materials, interpret complex underground utility plans, read survey data, and perform calculations for inspection and quantity verification including line and grade requirements. Apply knowledge of project sustainability requirements and enforce LAWA's mandatory MMRP requirements while maintaining availability for all shifts including nights and weekends as operational demands require. Qualifications High school diploma (or equivalent) Current City of Los Angeles Deputy Inspector Licenses; Grading, Concrete, desired. 30-hour Cal-OSHA training prior to assignment. The 30-hour training will have been received within the last 4 years Computer Proficiency - Utilize electronic equipment to review project plans and contract documents including RFIs, submittals, and change orders. Working and operational knowledge of Project Management Information Systems (PMIS) used for inspection reporting and document control. Microsoft Office, Microsoft Outlook, Adobe Pro, PM Web, Bluebeam, ProCore, etc.. D'Leon Consulting Engineers is an equal opportunity employer committed to fostering an inclusive and respectful workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

Job Posting Start Date 12-12-2025 Job Posting End Date 02-27-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Production Manager, Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, services, and solutions for the LNG and industrial gases industry. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with over $1.5 B in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange. Nikkiso ACD is an engineering and manufacturing company specializing in machinery designed to operate at cryogenic temperatures as low as - 420 degrees Fahrenheit, the boiling point of Liquid hydrogen. For over 50 years, Nikkiso ACD has specialized in centrifugal and reciprocating pumps as well as turbines for air separation. Nikkiso ACD has the most diversified product line in the industry covering nearly every application requiring pumps or turboexpanders. This position is based at Nikkiso ACD located in Santa Ana, CA. Job Overview The Quality Control Inspector is responsible for ensuring that all incoming materials are received accurately and routed to the appropriate departments. This position involves verifying that materials match orders, inspecting for defects or damages, and maintaining the organization of the workspace. You will play a key role in maintaining quality and ensuring that our operations run smoothly. Responsibilities Ensure all products are properly packaged, labeled, and lot controlled. Verify products against purchase orders or packing slips for accuracy. Performs visual, dimensional, and functional inspection and testing according to documented policies and procedures. Maintain ISO standards of the products and ensure that there is proper handling of inspection tools. Maintain the QA incoming and first article database. Records inspection and test data as prescribed by written instructions and procedures. Operates all associated test and measurement equipment as instructed and as documented in procedures. Develop and maintain company inspection reports through the manufacturing process. Receive inventory records, process of receiving inspection documents and all other applicable documentation in coordination with the QA department. Reporting quality anomalies to the supervisor. Manage non-conforming components, ensuring relevant departments are informed and assisting in final resolution. Read and interpret manufacturing drawings. Prepare non-conformance reports, as necessary. May prepare and submit change requests. Documents non-conformances in Non-Conforming Material Review system. May train other Inspectors. Assists in gathering, analyzing, and trending of data. Require to keep accurate records to ensure ISO compliance and to be prepare for regular ISO audits. Other Duties: Performs work of a miscellaneous nature as required. Qualifications High school diploma or GED. Some college preferred. Minimum of 5 years' experience as an Inspection or quality technician/specialist in machine shop, foundry, or sheet metal shop. Experience in use of precision tooling/measuring devices. (Calipers, micrometers, welding gases, torque wrench, scale, measuring tape, jigs, multimeter, etc.) High-level of visual awareness and attention to detail. Advanced organizational and multitasking skills. Experience drafting reports and collating data. Ability to work alone with minimal supervision. Ability to analyze and interpret technical drawings and weld symbols. Microsoft Office 360 (Word, Excel, Outlook) Knowledge, Skills, and Abilities Good vision and hearing. Basic understanding of metrology and arithmetic. Familiarity with ERP/ MRP operating systems. Physical Demands Ability to lift, carry, push, and pull up to 50 pounds unassisted; heavier loads require assistance or a lifting device. Ability to remain on feet for prolonged periods and move around the facility without limitations. Ability to sit and work at a station for extended periods without limitations. Capable of completing tasks that involve repetitive use of hands and other body parts. Safety Expectations Maintain a clean and organized work area. Actively participate in safety improvement activities. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Environmental Safety Requirements New Employee Safety Training is required by all newly hired employees, including Safety Awareness. All safety-related training is provided and tracked by the EHS Director. Job specific training modules deemed necessary by the employee's Manager or Director will be required of all employees on an ongoing basis. Understanding and ability to safely work in a potentially explosive environment. Employees are required to wear Nikkiso provided PPE as/when needed. PPEs include safety shoes, safety glasses, face shields, FR clothing, cryogenic gloves, cryogenic apron, cut resistant gloves, safety gloves, hearing protection, hard hats, and dust masks. Failure to comply with Nikkiso safety requirements will result in disciplinary actions, up to and including termination. In compliance with the Americans with Disabilities Act of 1990, the employer will provide reasonable accommodations to meet the work environmental and physical demands listed above. Salary Range: $55,000/yr. - $65,000/yr. EEOC Statement Equal Opportunity Employer/Veterans/Disabled Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Responsibilities: Perform visual and dimensional checks various incoming products (sheet metal, PCBAs or CCAs, Printed Boards or PCBs, Conformal Coating, Labels or markings, Cables, Harnesses; COTS items, and etc.) at various stages (Incoming, RMA, In-process, Final, Shipping, etc.) Test and or verify products for a variety of characteristics such as functional performance mechanically or electrically, or chemical properties or composition. Perform First Article Inspection and prepare FAIRs as needed. Record Inspection findings and generate NCMR's, DCRs' and ERRs' as needed. Communicate with the Project Mangers or QA for any possible delays and/or resolutions of any urgent and high priority jobs. Required: Extensive working knowledge of IPC-A-600, J-STD-001 and IPC-A-610, and IPC-A-620. Prior or current IPC training and/or certification is preferred. Ability to read, comprehend and interpret engineering drawings and documentation such as electrical schematic diagrams, mechanical and assembly drawings, BOM, and assembly instructions, and etc. Ability to adjust in fast-paced dynamic operations. Ability to apply concepts of basic algebra and geometry such as decimals, fractions, length, proportions, percentages, area, circumference, and volume. Ability to confer with management or engineering staff to determine quality and reliability standards or applicable requirements. Ability to use mechanical measurement tools such as calipers, micrometers, and electrical measurement tools, etc. Ability to operate computers and able to use computer applications and files such Microsoft Word and Excel, Adobe PDF, Outlook emails, and other databased platforms. Detail oriented, dedicated and self-motivated. Ability to work under minimum supervision. Work well in a team environment. Must have good interpersonal skills.

The Quality Control Inspector is responsible for verifying that Solar PV, BESS, and EV projects are installed in compliance with design drawings, codes, standards, and client requirements. This role ensures quality assurance through inspection, documentation, and enforcement of corrective actions.

Under Quality supervision, evaluates materials and products to ensure conformance to drawing requirements, procurement specifications and approved procedures. Evaluations include dimensional, functional, cosmetic and documentation as required per applicable inspection plan. Essential Duties and Responsibilities * Perform Quality Control inspections, as required per ATEC procedures * Read, understand, and interpret engineering (blueprint) drawings and associated GD&T (Geometric Dimension & Tolerances) * Perform mechanical, visual and functional inspection. Utilization of Micro-Vu or similar lighting inspection systems preferred * Engage with respective department members to maintain best inspection practices, foster a cooperative work environment, propose improvements when inefficiencies are observed * Generate, complete, and maintain quality documentation such as inspection records, non-conformance reports, deviation, and scrap forms * Process non-conforming materials following established procedures, able to identify and segregate non-conforming materials, transact as required in the company ERP (SAP) * Perform transactions in ERP system, as necessary to release product from Inspection * Read and conform to all company policies and procedures * Perform documentation evaluations * Interface with other departments including, Purchasing, Shipping, Receiving, Manufacturing, and Engineering as well as Supplier representatives * Assist auditors during internal audits * Other duties as assigned

GLAUKOS - QUALITY CONTROL INSPECTOR I - 1st SHIFT (SAN CLEMENTE, CA) How will you make an impact? The Quality Control Inspector I will be responsible for all aspects of inspection (receiving, in-process and final). In addition, this position will provide QSR support for other QA activities such as calibration, environmental monitoring, product testing, label control, etc. What will you do? Receiving Inspection Receiving inspection of components following procedures, specifications and drawings. Utilize a variety of standard metrology equipment, including: Optical comparator, height gauge, master height gauge, CMM, Vision Metrology System (VMS, e.g., Smartscope), calipers, micrometers, surface table, gauge blocks, pin gauges, dial indicators, durometer, measuring microscope, hardness testers, pull force testers, surface roughness testers, etc. Read engineering drawings and interpret geometric dimensioning and tolerancing. Review associated paperwork, complete inspection records using good documentation practices, and release components. Program the Smartscope to run automatic routines for multiple part inspections. (Level 2 and higher) Write clear and concise procedures for inspection of components, machined tubing, etc. (Level 2 and higher) Carefully handle and process extremely small components without damaging them. In-Process Inspection Perform Line Clearance for Operations activities Inspect and release labeling Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform inspections on components and assemblies in manufacturing Final Inspection Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform final inspection on finished goods Inspect finished goods for proper labels, packaging, tamper seals and product in accordance with procedures. Coordinate final inspection activities with outside vendors, i,e, LAL, peel testing Perform in-house peel testing on sealed packages Maintain sample retain area Other Duties Work with engineering in the design of high quality inspection / metrology fixtures. Support equipment and process validation activities by inspecting process outputs Conduct periodic compliance audits of manufacturing operations and procedures for cGMP compliance. Ensures on a daily basis quality records and company practices are compliant with internal procedures and regulations. Coordinate the monthly environmental monitoring of the cleanrooms. Coordinate quarterly dose audits. How will you get here? High School Diploma required. 0-2 years industry experience. Knowledge, Skills, and Abilities Medical device experience and working knowledge of QSR a must Experience working in a clean room and/or performing in-process assembly and manufacturing verification inspections desirable Attention to detail and accuracy a must Must have excellent documentation skills Team player, good written/oral communicator Must be organized and able to coordinate activities with outside vendors #GKOSUS

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Helpmates is looking for an QC Inspector to ensure that all product inspections are performed and meet customer requirements and company standards. Pay Rate: $23 - $28 per hour. Depending on experience Schedule: 3:30 pm - 12:00 pm Must have experience in AS9100 aerospace 3 - 5 years of experience as a Final Inspector and/or Receiving Inspector in a Manufacturing or Aerospace environment Job Duties: Follow quality processes and procedures to perform detailed inspection in receiving, in-process Final inspection to ensure products conform to customer requirements, rejecting and returning unacceptable materials Complete required documentation Perform AS9102 first article inspection and other extensive inspections per specifications Develop and review inspection plans Ensure quality standards are met for all components and assemblies for final acceptance Maintain parts history folders, inspection reports and prints/drawings Calibrate and document hand tools and other inspection equipment Perform hardness and electrical conductivity testing Carries out day-to-day work following the departments continuous improvement plan Promote safety by working in a safe manner at all times May perform other inspections or tests such as Proof test, Pressure test, CMM etc. Establish and maintain good standards of communication and relations with other departments, such as Engineering, Purchasing, Production, Receiving, etc. Perform other duties as assigned by Management such as identification of products Requirements: 3-5 years of experience as a Final Inspector and/or Receiving Inspector in a Manufacturing or Aerospace environment - MUST HAVE Effectively work with mechanical and electronic inspection tools and devices Working knowledge of Geometric and Dimensional Tolerances (GD&T) Working knowledge of mylars, optical comparator, thickness gage and profilometer Knowledge of aerospace specifications, quality codes and standard Knowledge of Six Sigma preferred Able to read blueprints and schematics Must be accurate and detailed with minimum errors Able to work within specific time schedules/deadlines Basic computer skills Work within a team environment Respond with sensitivity to people of diverse perspectives Dependability, excellent attendance, ability to work overtime and other shifts Minimum Education: High school graduate or GED required Associate degree or equivalent training in a related field preferred Certifications/Licenses: Certification in Mechanical Inspection Certification in CMM Inspection Certification in Hardness and EC testing preferred #HSCE

THE COMPANY Silvus Technologies is dedicated to one mission: connecting those who keep us safe. We do so by delivering the most advanced Mobile Ad-hoc Network (MANET) radios powered by our custom and ever-evolving Mobile-Networked MIMO waveform. Together, our radios and waveform provide the vital communications for mission critical applications in the harshest environments from underground tunnels to high altitude balloons. Silvus StreamCaster radios are being rapidly adopted by customers all over the world ranging from the U.S Departments of Defense, to International, Federal, State and Local Law Enforcement agencies, all the way to the Super Bowl, Grammys and industry-leading drone, robot, and other unmanned systems manufacturers. Wouldn't you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of “ Keeping Our Heroes Connected ”? Silvus' rapid growth is fueled by a focus on research and innovation and a team of the most passionate, skilled, and creative thinking individuals. If you are looking for a challenging experience, you owe it to yourself to learn how Silvus can provide a rewarding opportunity that creates a pathway to a fulfilling career. THE OPPORTUNITY Silvus is seeking a Quality Control Inspector who will report to the Quality Control Inspection Supervisor on the OQC team. Primary responsibilities will include conducting thorough inspections, maintaining accurate documentation, and ensuring proper procedures are followed for incoming electronic and mechanical parts and during the manufacturing and testing process. This role is also responsible for investigating any quality issues, anomalies, or failures and will work alongside engineering and suppliers to recommend any necessary changes or improvements. This position is fully onsite, Monday through Friday, at Silvus Technologies' HQ in the heart of vibrant West Los Angeles. The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion. ROLE AND RESPONSIBILITIES Perform and document inspections of products and processes, including electronic cables, GPS devices, Wi-Fi dongles, connectors, mechanical enclosures, shields, and other critical components. Conduct inspections tied to receiving raw materials, parts, components, and fit checks as necessary. Ability to inspect First Article components and subassemblies. Prepare in-process inspection reports, ensuring completeness and accuracy. Maintain Quality documentation. Identify the serviceability of parts and components and appropriate tooling. REQUIRED QUALIFICATIONS High School Diploma or GED required. Minimum 1-3 years of electronic part inspection experience. Proficient experience utilizing inspection tools (i.e., multi-meters, calipers, micrometers, microscopes). Demonstrated proficiency in reading basic schematics, specifically those related to PCBs and PWAs. Read and interpret part documentation, including blueprints, drawings, schematics, etc. Utilize Google Suite, Microsoft Office, and various communication systems effectively. Identify and escalate potential issues. Maintain clear and accurate records and documentation. Must have excellent organizational skills, possess high attention to details, with the capacity to handle numerous tasks simultaneously. Excellent and effective oral and written communication. Must be a U.S. Citizen due to clients under U.S. government contracts. All employment is contingent upon the successful clearance of a background check. PREFERRED KNOWLEDGE SKILLS AND ABILITIES IPC-J-STD 610, 620, or 001. Ability to recognize the importance of processes and procedures and follow them accordingly. Ability to remain flexible and responsive in a fast-paced environment with shifting demands. Effectively evaluate workload and manage competing priorities and deadlines. Proactively recognize challenges or risks and communicate them to the appropriate stakeholders to ensure timely resolution. WORKING CONDITIONS & PHYSICAL REQUIREMENTS Occasional exposure to heat and cold. While performing the duties of this job, the employee is required to do the following: Perform bending and reaching movements to place items on lower and higher shelves. Kneeling or squatting to access lower shelves. Must be able to lift up to 50 lbs. when receiving incoming part shipments. Walking/Moving in the labs. COMPENSATION The pay range is NOT a guarantee. It is based on market research and peer data, and will vary depending on the candidate's experience and qualifications. CA Pay Range$22-$27 USD NOTE - As a U.S. Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements are needed for some Engineering or R&D roles. This generally does NOT apply to International positions; only job postings for positions located in the U.S. Exceptions will be included in the Required Qualifications section of the posted position. All Employment is contingent upon the successful clearance of a background check. Silvus is proud to be an equal-opportunity employer, and we value diversity. We do not discriminate on the basis of race, color, age, religion or belief, ancestry, national origin, sex (including pregnancy), sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, physical or mental disability, protected veteran status, genetic information, political affiliation, or any other factor protected by applicable federal, state, or local laws. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request accommodation. *Silvus does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to Silvus Technologies.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

About the Role: The QC Inspector plays a critical role in ensuring that all manufactured products meet stringent quality standards and comply with industry regulations. This position involves conducting detailed inspections and tests on raw materials, in-process components, and finished goods to identify defects or deviations from specifications. The QC Inspector collaborates closely with production teams to address quality issues promptly and implements corrective actions to prevent recurrence. By maintaining accurate documentation and reporting, the inspector supports continuous improvement initiatives and helps uphold the company's reputation for excellence. Ultimately, this role ensures that only products meeting the highest quality criteria reach customers, thereby safeguarding customer satisfaction and company success. Minimum Qualifications: High school diploma or equivalent. Proven experience in quality control or inspection within a manufacturing environment. Familiarity with quality control procedures, inspection techniques, and measurement tools. Basic understanding of manufacturing processes and product specifications. Ability to read and interpret technical drawings and quality documentation. Preferred Qualifications: Certification in Quality Control or related fields (e.g., ASQ Certified Quality Inspector). Experience with statistical process control (SPC) and root cause analysis. Proficiency in using digital measurement instruments and quality management software. Knowledge of ISO 9001 or other relevant quality management systems. Strong problem-solving skills and attention to detail. Responsibilities: Perform visual and dimensional inspections of materials and products at various stages of the manufacturing process. Utilize measurement tools and testing equipment to verify product specifications and tolerances. Document inspection results accurately and report any non-conformances or quality issues to the quality control manager. Collaborate with production and engineering teams to investigate defects and implement corrective and preventive actions. Ensure compliance with company quality standards, safety regulations, and industry guidelines during all inspection activities. Maintain inspection equipment and ensure calibration is up to date to guarantee measurement accuracy. Participate in internal audits and assist in external quality audits as required. Skills: The QC Inspector applies their skills daily by meticulously examining products to ensure they meet all quality standards, using both visual assessment and precise measurement tools. Their ability to interpret technical drawings and specifications allows them to identify deviations and potential defects early in the production process. Communication skills are essential as they report findings clearly and collaborate with cross-functional teams to resolve quality issues effectively. Analytical skills support their role in conducting root cause analysis and contributing to continuous improvement efforts. Additionally, proficiency with quality management software and inspection equipment ensures accurate data recording and compliance with regulatory requirements.

Job Posting Start Date 10-15-2025 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Quality Assurance Manager the Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

SPT Labtech is a global supplier of innovative lab automation products for the life science markets. Our solutions save time and material costs and simplify complex operations. We are natural innovators. We create, design and manufacture high quality, robust and innovative automated laboratory equipment for academic, pharmaceutical and biotechnology research. We are looking for a talented Quality Control Inspector to join our growing team. You must have the ability to work on complex products and to work collaboratively and flexibly across several inter-disciplinary teams. Inspector Job Responsibilities: Inspect and approve incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Inspect in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor. Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work. Reject all in-coming materials, in-process production, and finished goods products that fail to meet quality standards by specifications or quality criteria through non-conformance process. Assists Quality team members or management with failure and nonconformance data recording and reporting Prioritizes schedules based on product introduction and manufacturing schedules, maintaining a minimum turnaround time. Accomplishes quality and organization mission by completing tasks and responsibilities as needed. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations. Support the engineering manager or take ownership in resolving quality-related issues in a timely manner Recommend improvements to the production and quality control inspection process to ensure quality control. Be a team member of the quality department and support Production, Engineering and other internal departments to further the interests of the company as a whole. Requirements Written and verbal communication skills Experience with inspecting electromechanical assemblies, machined and metal fabrication highly desired. CMM experience a plus Basic math skills Excellent computer skills to include use of MS Office Attention to detail Analytic skills Documentation skills Time management skills Flexibility and able to change priorities on short notice based on production demands Hand/eye coordination Reporting skills Blueprint reading Education and Experience Requirements: High school diploma Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments One to two years' quality inspector experience Knowledge of ISO and QMS is highly desired Benefits 401(k) Health insurance Dental insurance Vision insurance Paid time off SPT Labtech is committed to a diverse and inclusive workplace. SPT Labtech is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.