Inspector jobs in Tyler, TX

We are looking for an Electrical Quality Inspector to support a datacenter construction project in El Paso, TX ASAP! Project: Datacenter (high voltage substation and power distribution) Role Type: 8 month contract with high potential for extension or direct hire with client Start: December 22, 2025 Schedule: 6 days per week, roughly 50-60 hours per week Per Diem: 140 USD per day for days worked ** Candidates must be eligible and authorized to work in the USA without sponsorship, visa, or C2C. Solicitation emails will be ignored. ** We are hiring an Electrical Quality Control Inspector to support a large-scale electrical construction project for a datacenter in El Paso, TX. This role is focused on high voltage electrical substations, including conduit, grounding, and erection of steel, along with document control and quality records. What you'll do Perform electrical QA/QC inspections on high voltage substation construction activities Verify installation of conduit, grounding systems, raceways, cable trays, and steel structures against drawings, codes, and project specs Manage document control for QA/QC, including inspection reports, test records, ITPs, RFIs, NCRs, punchlists, and turnover packages Use Procore and other project systems for reporting, documentation, and communication Support daily/weekly quality meetings, walkdowns, and coordination with construction, commissioning, and client teams Help maintain a safe work environment and follow site safety rules and procedures What we're looking for Prior experience as an Electrical QC / QA/QC Inspector / Electrical Construction Inspector / Electrical Field Engineer Hands-on background in high voltage substation or large electrical construction (utilities, data centers, industrial, power projects, etc.) Strong understanding of grounding, conduit, steel erection, and power distribution equipment Experience with document control and quality records on construction projects Good communicator who can work closely with field crews, supervision, and client representatives Computer skills, including comfort with Procore or similar construction management platforms Willing and able to work 6 days a week, about 50-60 hours per week, on site in El Paso for the full 6-8 month duration Nice to have OSHA 10 (if not current, we can help you obtain it) Previous experience on data center or large tech client projects Additional QA/QC or electrical-related certifications What we offer W2 position with a competitive QA/QC rate (discussed during the interview process) Per diem of 140 USD per day for days worked Standard PPE such as hard hat and high-visibility vest provided Employee parking lot with transportation shuttles to the site Opportunity to work on a high-profile project with a strong, safety-focused team

The Material Inspector will support the Project Quality team by overseeing material inspection control, documentation, and coordination for a new fabrication facility. This role ensures that all materials meet project specifications, quality standards, and compliance requirements. Key Responsibilities: Conduct inspections on delivered and installed materials per approved submittals and specifications. Review and verify Material Test Reports (MTRs), Certificates of Compliance (CoC), and Mill Test Certificates (MTC). Coordinate material sampling and testing with third-party agencies. Prepare and submit Material Inspection Reports (MIRs) for review and approval. Maintain inspection logs, including pass/fail records and corrective actions. Upload inspection data and documents into the Construction Project Management System (CPMS). Monitor on-site material storage, labeling, and handling practices. Support the issuance and closure of Non-Conformance Reports (NCRs). Collaborate with QA/QC teams, contractors, and client representatives. Qualifications: High school diploma or higher; associate degree preferred. Proficient in Microsoft Office (Excel, Word, Outlook). Strong documentation, reporting, and communication skills. Fluent in English (verbal and written). Preferred Experience: Background in semiconductor or high-tech industrial construction. Familiarity with QA/QC systems and reporting procedures. Bachelor's degree in Engineering, Construction Management, or related field a plus.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a Petroleum Inspector, with some experience, to join our Caleb Brett team , on site, at our Deer Park facility. This is a fantastic opportunity to start a versatile career in the Inspection and Testing business, with Intertek, a Global and Award winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector is responsible for Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships. This position will involve traveling to client locations for onsite inspections. Shift/Schedule: Various Shifts, with nights, weekends and holidays, possible Salary & Benefits Information In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks and barges and ships. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges and ships. To perform routine equipment calibration, verification and function checks. To maintain work areas, records and equipment in a clean, organized and functional condition. Understand and adhere to Caleb Brett safety procedures. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: A valid driver's license and reliable driving record is required Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis Cannot have a fear of heights Model Intertek's 10X Energies at all times within the workplace, practicing business the right way. Physical requirements to include Lifting (25-35 pounds), walking, standing, reaching, bending, stooping, climbing, squatting and driving. Must have or be able to obtain a Transportation Worker Identification Credential (TWIC). Ability to work in a fast-paced, multi-tasking environment with shifting priorities and demanding deadlines. Be able to gauge and sample shore tanks and barges. Be able to calculate shore tanks and barges and know how to interpolate on strapping tables. Set shore stop. Be able to gauge and sample vessels. Be able to strap out vessels using vessel strappings and being able to interpolate. Preferred Requirements & Qualifications: High school diploma, or equivalent preferred Industry Certifications are a PLUS May be some travel, on a volunteer basis

Petroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

Join the Texas Health and Human Services Commission (HHSC) and be part of a team committed to creating a positive impact in the lives of fellow Texans. At HHSC, your contributions matter, and we support you at each stage of your life and work journey. Our comprehensive benefits package includes 100% paid employee health insurance for full-time eligible employees, a defined benefit pension plan, generous time off benefits, numerous opportunities for career advancement and more. Explore more details on the Benefits of Working at HHS webpage. Functional Title: LTCR Inspector Job Title: Inspector - License & Cert Agency: Health & Human Services Comm Department: APS Provider Investigations Posting Number: 12002 Closing Date: 03/12/2026 Posting Audience: Internal and External Occupational Category: Protective Services Salary Group: TEXAS-B-20 Salary Range: $5,035.99 - $6,779.25 Pay Frequency: Monthly Shift: Day Additional Shift: Telework: Not Eligible for Telework Travel: Up to 80% Regular/Temporary: Regular Full Time/Part Time: Full time FLSA Exempt/Non-Exempt: Nonexempt Facility Location: Job Location City: TYLER Job Location Address: 3303 MINEOLA HWY Other Locations: MOS Codes: 6016,6017,8012,8056,1S0X1,2A7X2,2F0X1,43HX,4E0X1,640A,68R,86M0,87G0,87I0,87Q0,8I000,8I100,8S000,AD LS,ME,MSSD,MSSE,MSSR,MST,OAP11,OAP14 If you are looking for a place to work where you can establish a career that is filled with purpose, this is the job for you! LTCR Inspector - Starting Market Rate Salary $60,431.88 The Inspector V conducts on-site inspections and investigations including those involving abuse, neglect, and exploitation of adults and children with mental illness or intellectual, developmental, and physical disabilities in various Texas Long-Term Care facilities: * Home and Community-Based Services (HCS) Waiver Program * Texas Home Living (TxHmL) Waiver Program * State Hospitals * Managed Care * Community Intellectual and Developmental Disability (IDD) services Investigations are completed in accordance with Texas Administrative Code and Long-Term Care Regulatory (LTCR) policy. The Inspector will testify at hearings or in court proceedings to provide information regarding policy/procedures, history, findings, or activities. Works occasionally outside of traditional working hours (8 am - 5 pm), which includes evening hours, weekends, and holidays, as required for case-related functions, on-call duties, and/or as required by management. This position offers a competitive starting salary; excellent state benefits, including health insurance and retirement; and the opportunity to regularly travel to different providers within a region and across the state - Please see the Additional Information section below for more detail on travel. In this front-line field position, a surveyor is mobile and flexible and performs minimal work at an office, though the role does require writing reports detailing any deficiencies/violations against a facility, remedies to correct those deficiencies, and narrative to support regulatory determinations. See below for details. The state of Texas offers many benefits to employees. HHSC is a qualifying organization for the Federal Public Service Loan Forgiveness Program, which forgives the remaining balance on college student Direct Loans after making 120 qualifying monthly payments. We also offer excellent health benefits, a lifetime monthly retirement annuity as well as 401(k) and 457 Programs under the Employees Retirement System of Texas. Essential Job Functions (EJFs): Attends work on a regular and predictable schedule in accordance with agency leave policy and performs other duties as assigned. The inspector conducts on-site licensure inspections, complaint and incident investigations, and annual comprehensive surveys to include the investigation of abuse, neglect, and exploitation at Long-Term Care (LTC) providers to determine compliance with federal and state health and safety regulations. The inspector conducts exit conferences at the end of an inspection with facility staff regarding preliminary findings of the inspection. (25%) The inspector completes written reports for each inspection or survey to detail deficiencies and provide narratives to support regulatory findings. The inspector summarizes facts obtained during an investigating whether abuse, neglect, or exploitation occurred. The inspector is responsible for ensuring the documentation is clear and concise; ensures course corrections implemented by the providers are appropriate to address the risk or noncompliance with regulations identified during inspections and investigations. If the inspector determines abuse, neglect, or exploitation did occur the inspector will make a referral to HHSC's Employee Misconduct Registry of the alleged perpetrator. (25%) The inspector establishes priorities in gathering evidence to determine what methods to use in securing evidence such as going through the interview process or reviewing records to determine compliance or noncompliance. Analyzes evidence to complete a thorough investigation and determine if there is a preponderance of evidence. Evidence must follow chain of custody and be protected during the process. (25%) The inspector reviews and approves corrective action plans to address noncompliance with the regulations; responsible for informing the provider of issues that require immediate remedial action to ensure the health and safety of consumers; recommends enforcement actions; ensures administrative penalties are assessed and processed according to state and federal requirements. (10%) The inspector participates in meetings to discuss major issues identified during the inspection/investigation, and the outcome of the inspection/investigations. The inspector testifies at hearings and court proceedings regarding the investigation findings and compliance determinations. The inspector will train new hires by conducting on-the-job training which includes mentoring, shadowing, and return demonstrations. (10%) The inspector performs other duties as assigned by their supervisor, or regional leadership, and that are required to maintain unit operations. This includes being available for on-call duties for emergencies such as weather events or high-priority situations at providers. (5%) Knowledge, Skills, and Abilities (KSAs): Knowledge of and ability to interpret local, state, and federal laws and regulations relevant to program area. Knowledge of acceptable professional standards of care. Skill in conducting inspections and investigations and determining proper courses of action. Skill in establishing and maintaining effective working relationships. Skill in effective verbal and written communication. Ability to work independently. Ability to prepare reports, to interpret laws and regulations, to gather and analyze data and to communicate effectively. Ability to exercise professional judgment and reach sound decisions. Ability to integrate complex regulatory concepts, procedures, or processes. Ability to multi-task and track multiple activities with competing priorities. Ability to establish and maintain effective working relationships with team members and others. Ability to work in a potentially emotion-filled environment. Ability to operate a computer, tablet, laptop device, smartphone, fax machine, copy machine, and various software packages, including Microsoft Office. Ability to conduct interviews in various locations, including private residences, day habilitation facilities, group homes, and state-operated facilities. Ability to work in environments where violent and dangerous individuals may be present. Ability to oversee the work of others. Registrations, Licensure Requirements or Certifications: Valid Class C (or higher) Texas driver's license or equivalent license from another state, is required. Initial Screening Criteria: Experience interacting with or communicating with members of the public, in person or by phone. Four-year degree from an accredited college or university, preferred. Experience conducting investigations preferred. Experience working with individuals with mental illness, intellectual or developmental disabilities, or physical disabilities preferred. Additional Information: Flexibility in work hours is required for this position. The job requires 80% travel, including statewide travel, overnight, and weekend travel. On-call duties for emergencies or high-priority situations in facilities or at providers may be required. Must have reliable transportation. All applicants must pass a fingerprint criminal background check. If you are an active or former licensed nursing facility administrator, certified nurse aide, or medication aide, hiring will be pending until professional licensing and Employee Misconduct Registry checks are completed. If you are offered and accept the position, you will not be permitted to continue employment at any HHSC regulated facilities or providers. You will be required to disclose any potential conflicts of interest, secondary employment, volunteer activities, and friends/family who own, operate, or work at regulated providers. HHS agencies use E-Verify. You must bring your I-9 documentation with you on your first day of work. I-9 Form - Click here to download the I-9 form. Review our Tips for Success when applying for jobs at DFPS, DSHS and HHSC. Active Duty, Military, Reservists, Guardsmen, and Veterans: Military occupation(s) that relate to the initial selection criteria and registration or licensure requirements for this position may include, but not limited to those listed in this posting. All active-duty military, reservists, guardsmen, and veterans are encouraged to apply if qualified to fill this position. For more information please see the Texas State Auditor's s, Military Crosswalk and Military Crosswalk Guide at Texas State Auditor's Office - Job Descriptions. ADA Accommodations: In compliance with the Americans with Disabilities Act (ADA), HHSC and DSHS agencies will provide reasonable accommodation during the hiring and selection process for qualified individuals with a disability. If you need assistance completing the on-line application, contact the HHS Employee Service Center at **************. If you are contacted for an interview and need accommodation to participate in the interview process, please notify the person scheduling the interview. Pre-Employment Checks and Work Eligibility: Depending on the program area and position requirements, applicants selected for hire may be required to pass background and other due diligence checks. HHSC uses E-Verify. You must bring your I-9 documentation with you on your first day of work. Download the I-9 Form Telework Disclaimer: This position may be eligible for telework. Please note, all HHS positions are subject to state and agency telework policies in addition to the discretion of the direct supervisor and business needs.

Job Title: Natural Gas Distribution Inspector Level 2Location: South East, TXKey Responsibilities:Conduct comprehensive inspections of pipelines, focusing on line extensions and rebuild services, to guarantee compliance with industry standards and regulations.Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Collaborate closely with engineering teams to develop effective inspection strategies and contribute to the planning of line extension projects and rebuild services.Provide technical expertise to support decision-making processes related to pipeline maintenance, repair, and replacement.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:Minimum of 2-4 years of hands-on experience in pipeline inspection, with a focus on line extensions and rebuild services.In-depth knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects.Familiarity with industry-specific software and tools.Strong analytical skills and attention to detail, with the ability to identify and assess potential issues in pipelines.Excellent communication skills with the ability to work within a team. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

VSC Fire & Security delivers integrated, cutting-edge fire protection, life safety and security solutions, including fire suppression and detection systems, fire sprinklers, alarms and security systems. The company was founded in 1958 on quality craftsmanship and exceptional customer service, with integrity and reliability at the center of everything we do. As the premier provider of fire protection and life-safety solutions across the Southeast, VSC Fire & Security provides every customer with comprehensive solutions through outstanding design, efficient installation, reliable service and repair, and thorough inspections. VSC Fire & Security in Tyler, Texas is seeking candidates for the position of Inspector. What we offer: Sign-on bonus OR relocation assistance for qualified candidates. Competitive salary. Range $40.00 - $50.00 and up based on experience (overtime eligible). Monday - Friday (occasional evening, weekend, and out-of-town work). Options for Medical, Dental and Vision insurance for you and your family. A 401K plan with a company match. PTO and Paid Holidays. Opportunities for training and advancement. Relevant educational and licensure reimbursement for qualified candidates. Health Savings Account (HSA). Life Insurance. Employee Assistance Program. Referral Bonuses. What you need: Two to three (2-3) years of experience in inspections of fire sprinklers and integrated systems. Licensure per state and local requirements. Inspect or review projects to monitor compliance with building and safety codes as well as NFPA, state, and local codes. Knowledge of inspection and testing chemical suppression systems. Ability to follow written and verbal instructions. Exceptional attention to detail and communication skills. Eagerness for professional development and growth. Ability to pass various background checks. Reliable transportation, valid State Driver's License with acceptable driving record for use of company vehicle. Desirable (but not required): Experience in the construction or electrical industry. General working knowledge of industrial and/or commercial installation methods. Ability to read and comprehend drawings. Texas Candidates: RME-I Required What you will do: Inspect and test the installation and service of fire sprinkler systems, backflow prevention assemblies, and fire alarm systems per NFPA-25 & 72 (National Fire Protection Association), and other applicable codes. Maintain proper Risk Management and Safety procedures on all job sites per VSC policies. VSC Fire and Security is a drug free workplace. Equal Opportunity Employer We look forward to hearing from you! ***************

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Smith, Camp, Gregg, Harrison, Marion, Upshur Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

Our Company: Established in 2012, Seek Now captures robust property data to meet the needs of customers across the insurance and real estate industries. With more than 2 million property inspections completed to date while currently servicing 3,000 properties per day, Seek Now is the leading data capture and inspection services firm serving 240+ customers. Our mission is to help our customers make faster decisions and improve economic outcomes, all while providing a stellar customer experience. We accomplish this through continuously reimagining how information is captured, transformed, and transmitted across all the industries we serve. Our vision is to be the leading provider of on-demand, ground truth property data solutions. We do this while creating individual growth opportunities for our employees, expanding network of Seekers, and value add partners. Summary: Seek Now is searching for capable 1099 independent sub-contractors to provide accurate, impartial, and complete home and commercial property inspections. Our 1099 Field Inspectors are the frontline experts who assist and collect data for our clients in the Property Insurance, Facility Management, and Real Estate sectors. Essential Expectations: Ability and willingness to access and inspect steep and/or high roofs Lift, carry, and set up ladders and other equipment up to 100 pounds Sketch and measure roof and/or room components Scope the area of different sized and shaped roofs, rooms, and other inspection areas Perform accurate, impartial, and complete inspections, which includes but is not limited to identification of age and condition Travel to perform inspections in areas hit by weather catastrophes when needed, which includes assignments averaging two (2) to six (6) weeks at a time Lodging is provided by Seek Now which can include having a fellow Seek Now Sub-Contractor as a roommate Ability to take assignments on short notice and complete all aspects of job assignments as defined Represent our Core Values: Self-Starter, Visionary & Strategic, Lead with Humility Strong attention to detail, organization, and time management skills with a focus on professionalism and customer service Document inspections using our proprietary software application on your smartphone device Be comfortable covering a 100-mile radius around your home market Flexible in job assignment scheduling Ability to utilize other equipment as needed including 3D Cameras, Drones, Moisture meters Preferred Qualifications: Roofing sales or construction experience Property Insurance experience Haag Certification Ability to use a 40'-foot ladder Minimum Requirements: A clean and reliable truck, van, or SUV that is capable of transporting a 32' ft ladder safely An operational laptop and smartphone Ability to travel, especially during catastrophic events such as hurricanes and tornadoes Ability to earn HAAG Certification within 90 days Ability to use a laptop and a smartphone, which includes navigating between applications, entering data, and using Microsoft Office products Ability to submit complete, quality reports on time 32-foot ladder Professional appearance Valid driver's license State Issued Workers Compensation Certificate of General Liability Insurance LLC Articles or Certificate of Organization 1099 independent contractor Seek Now operates 7-days a week, providing you the opportunity to be flexible with your availability Great earning potential - six figures Paid weekly. Team-first environment State-of-the-art, technology-based tool for inspections Strong support team for our 1099 independent contractor field inspectors Hotel fees paid/reimbursed on CAT jobs Other Requirements: Professional appearance Valid driver's license State Issued Worker's Compensation Certificate of General Liability Insurance LLC Articles or Certificate of Organization Position Type and Hours: 1099 independent contractor Seek Now operates 7-days a week, providing you the opportunity to be flexible with your availability Benefits and Perks: Great earning potential - six figures Paid weekly Team-first environment State-of-the-art, technology-based tool for inspections Strong support team for our 1099 independent contractor field inspectors Hotel fees paid/reimbursed on CAT jobs Disclaimer: This description is not designed to cover or contain a comprehensive listing of activities, expectations, or functions that are required of the contractor.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Inspector (TFE731) Lead Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Lead Inspector, you will oversee the inspection, release and certification of products processed within production areas of the business unit. Responsible for the certification of products and for aligning the inspection group to meet internal and external customer targets. A portion of assigned working hours, will continue to perform hands-on technical work based on existing qualifications attained as a Technician. What you'll do: Assists Operations Managers with production flow, and planning. Leads, assigns work to inspectors. Reviews work in process and checks completed work to ensure quality and timely completion of job assignments. Eliminates ordinary difficulties encountered in regular job assignments. Demonstrates and encourages a team environment and works with team members to resolve conflicts. Instructs other employees in the proper method and procedures of performing jobs when required. Uses production systems to generate production routings, retrieve technical work instructions, document product condition, requisition material, report labor usage, and report product location and production status. Generates measures of performance (MOP's) and assists with analysis and development of actions. Provides support and guidance to production team and able to troubleshoot issues/problems. Works with the Operations Managers to determine cell inspection training requirements, monitors progress to the plan and addresses any gaps. Assists with maintaining the cell skills matrix and iteration tracking. Provides performance evaluation input to the Operations Managers for inspection team members. Recognizes and understands flight/product safety critical parts and processes. Responsible for immediately reporting any flight/product safety concerns. Participates in pro-active risk analysis of flight/product safety critical parts and processes. Updates and reports out on cost of poor quality. Leads and participates in identification of root cause and corrective actions. Activity promotes CI, monitors progress within the cell and assists where required to ensure goals are met. Acts as the primary liaison with engineering and other production personnel as required to troubleshoot, research, and solve technical problems. Ensures all applicable safety requirements are followed and address any unsafe practices/conditions immediately. Performs hands-on technical work based on existing qualifications attained as Detail and/or Quality Inspector. Position Requirements: Minimum 5 years of experience. Qualified in the detail and/or quality inspection functions. Knowledgeable in the configuration and assembly of the products processed in the cells. Knowledgeable in the assembly methods and techniques used. Proficient in the use of precision measuring instruments. Proficient in dimensional inspection techniques. Demonstrated knowledge of the applicable regulatory requirements relating to maintenance of aeronautical products. Knowledgeable on the documentation completion requirements. Knowledgeable in the quality requirements relating to the production process. Proficient in decision making to ensure compliance to all customers, regulatory and company requirements. Proficient in communication skills. Ability to guide and train other levels of technicians. Expertise with technical documents and manuals including, but not limited to company instructions, company processes, overhaul manuals, service bulletins and OEM manuals. Must be able to read and interpret technical manuals, instructions, blueprints and drawings. Must be proficient in the use of tools, PME, and instruments necessary for the accomplishment of job duties. Must have an understanding and working knowledge of hazardous material handling and disposal. Strong planning, organizational, analytical, interpersonal, oral and written communication skills. Must have demonstrated ability to use good judgment and make sound decisions. Must be authorized to work in the U.S. Preferred Characteristics: Must possess leadership qualities to include demonstrated ability to cooperate and work well with others. Must have ability to perform high quality of work in a reasonable length of time, lead and direct the work of others. Highly proficient with in depth knowledge of products, processes and technical functions within the production cells. Working knowledge of production management computer system and other related internal control systems. Regularly required to sit for prolonged periods. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-GH1

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

: For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity before and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

Company: Norris Cylinder Company Employment Type: Hourly | Full-Time Function: Manufacturing Production / Distribution Equal Opportunity Employer Minorities/Women/Veterans/Disabled Main Duties & Responsibilities FIRST AND SECOND SHIFT JOB PURPOSE: To perform a variety of operational functions that constitutes the production, inspection and distribution of products or services for our customers. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs assignments in accordance with established safety policies and procedures. Adheres to the Quality Policy, including all items assigned to this position in accordance with ISO policies, procedures, and work instructions. Complies with the work rules and standards set forth in the Employee Handbook. Maintains good housekeeping and clean work areas in assigned work sites. Displays appropriate work ethics in the workplace and group settings which provides a positive work environment with co-workers. Refers to work order or procedural instructions appropriate for each job, function or assignment before commencing work. Performs any specified quality assurance checks designated for each job, function or assignment. Assures that all work assigned to position is performed in accordance with specifications, instructions and requirements. Demonstrates ability to meet production standards on specific assignments within a reasonable time, depending on the degree of difficulty of their job functions. SPECIFIC DUTIES AND RESPONSIBILITIES: Working knowledge of gauges used in Goss inspection Ability to identify flaws in cylinders Ability to complete written reports Knowledge of equipment set-up procedures. ADDITIONAL DUTIES AND RESPONSIBILITIES Accomplishes all tasks as appropriately assigned or requested for successful completion of the mission of Norris Cylinder. Qualifications QUALIFICATIONS Experience, Competencies and Education Must posses an education or experience level that permits the employee to effectively communicate and perform duties, assignments and responsibilities of the job. Language Skills Ability to read, analyze and interpret the documents relating to the job, function or assignment. Mathematical Skills Ability to perform basic mathematical equations. Reasoning Ability Ability to make decisions when identifying in-process problems. Ability to deal with a variety of job assignments. ACCOUNTABILITIES AND MEASURES Accomplishment of assigned tasks. Adherence to the Quality Policy and ISO Procedural Requirements. Ability to maintain clean work areas and follow good housekeeping practices. Ability to follow work rules, work independently, be flexible and be willing to perform a variety of jobs. Ability to use machinery/equipment required to accomplish a given job assignment. Ability to work effectively, courteously and respectively with co- workers and other personnel. AMERICANS WITH DISABILITIES SPECIFICATIONS Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; kneel; crouch or crawl; talk or hear. The employee must occasionally lift and/or move up to 60 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is not normally exposed to weather conditions. However the production areas are often hot and noisy. The noise level in the work environment is high and ear protection is required.

Job Details Longview, TXDescription API 510, 570, 653 Inspector At the direction of the client, perform visual and non-destructive examinations of static and dynamic pressure retaining equipment in accordance with American Petroleum Institute (API) standard 570 and the American Society of Mechanical Engineers (ASME). Submit to client technically accurate reports documenting equipment condition. Provide client with technical recommendations for the repair, re-rate, replacement, and/or alteration of plant equipment, as required for safe operation within stated operating parameters for durations specified by client. Provide technical input to client as required for welding and metallurgical issues. Provide technical guidance, on an application of non-destructive examination techniques and procedures. Fully comply with all Xcel NDT and client safe work practices and actively participate in all site safety initiatives. Qualifications One of more API Certifications - API 510/570/653 Physical Demands and Work Conditions * Standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling, fingering, feeling, talking, hearing, visual acuity, accommodation and color vision * Moving, carrying, lifting, objects in excess of 50 lbs * Climbing and working off of ladders, stairs, and scaffolding in excess of 100 ft * Working extended hours and standing for extended periods of time * Work in indoor and outdoor environments in conditions of extreme heat and cold * Work in and near industrial hazards.

The perks of working here We're committed to providing our employees with meaningful benefits and real opportunities. Competitive Pay Good Benefits including: Medical Dental (with orthodontic) Disability Vision Life insurance 401K with company match Attendance Bonuses Paid Meal Breaks Merit Increases Paid Time Off (PTO) and Paid Holidays Growth opportunities in a stable and safe work environment Collaborative and positive team culture Responsibilities Revolution is now hiring for Packer Inspector roles in Kilgore, TX. We have openings on the 7:00 am - 3:00 pm shift and the 3:00 pm - 11:00 pm shift. This role will be responsible for learning the basic operations of production department(s) in processing materials or manufacturing products in an industrial organization. Follow all Environmental Health & Safety policies and procedures. Check the product for seal strength, size, scoring, lip, print quality/location, and others specified on the job specification, no less than four times an hour, and every roll change. Make minor machine adjustments, such as resetting the eye, putting flip back in, raising and cleaning the seal bar, and clearing jams from the machine. Makeup cartons as needed. Observe rolls for splices and changes. Record accurate production records, including count, downtime, scrap, number of rolls run, and complete dockets. Maintain a clean and neat workstation at all times, following American Institute of Baking requirements. Perform other general housekeeping duties as assigned. Retain and label samples as required. Pack product neatly and label appropriately. Make headers and/or saddle seals on the product. Observe Company work rules and safety regulations. Operate punch press. Apply inspection stamp to all cartons of product. Move packed boxes (10-40 lbs.) to pallets. Qualifications High School diploma or GED required. Basic math skills such as addition, subtraction, and multiplication to record accurate reports. Must be able to read customer specification sheets to verify and ensure the quality of the product. Adequate for legible and accurate recording of production reports and other pertinent information. Must be able to lift and carry up to 50 pounds for a short distance. Must be able to stoop, bend, kneel, walk, have full dexterity, and have a correctable vision. Must be able to work in hot and cold weather. Must be able to handle loud noises. Be able to pass color blindness test. Must be able to stand for 8-12 hours. ABOUT REVOLUTION It's time to redefine possible. At Revolution, we exist to empower businesses and consumers to contribute to a better future through sustainable loop plastic solutions. Our unique, circular approach results in sustainable products and services that effectively meet the needs of businesses today, while helping prepare them for tomorrow. And we're just getting started. Learn more at revolutioncompany.com. Revolution welcomes diversity and is An Equal Opportunity/Affirmative Action Employer - Minority / Women / Disability / Veteran and other protected categories are always encouraged to apply.

This position Inspects and permits the City's food establishments; Responds to public health inquiries and complaints from the public; assists Senior Inspectors with investigations of alleged health code violations and reports of food borne illnesses; prepares and maintains a variety of health inspection records and documentation; assists with public education regarding food safety; and performs and assists with other related duties. * ------------------------------------------------------------------------------------- Health Inspector I - entry $1639.42/bw / $42,624.87/annually Health Inspector II - entry $1809.61/bw / $47,049.88/annually Health Inspector III - entry $1997.47/bw / $51,934.26/annually * pay is dependent on experience* Examples of Duties Provides for the enforcement of the City's food ordinances and State public health laws. Coordinates and performs inspections of various types of food establishments. Monitors and ensures food establishments are properly permitted and operating in accordance with applicable health and safety requirements. Inspects and permits temporary events involving food service providers. Responds to and investigates public health complaints against food establishments and hotels. Documents health violations and communicates necessary corrective action to food establishment owners/managers; issues citations as warranted. Performs follows up inspections to ensure appropriate compliance by food establishments. Assists in investigations of reported food borne illnesses and diseases. Able to communicate a variety of information to a broad audience. Prepares and files court cases; provides court testimony as required. Assists in reviews and monitoring of food establishment building plans for regulatory compliance. Assists in educational sessions on food safety and/or other environmental health topics. Prepares and maintains a variety of health inspection records, reports, and documentation. Performs other related duties as assigned or required. Minimum Requirements Health Inspector I - Bachelor's Degree in Environmental Health, Biology, or a related field with a minimum of 30 accredited college hours in science. The ability to take and pass the State Sanitarian exam within 6 months of employment. Must possess a valid Texas Driver's License. Health Inspector II - Bachelor's Degree in Environmental Health, Biology, or related field, and two years health inspection/environmental health experience; OR an equivalent combination of education and experience. Must possess a valid Texas Driver's License. Health Inspector III - Bachelor's Degree in Environmental Health, Biology, or related field, and four years health inspection/environmental health experience; OR an equivalent combination of education and experience. Must possess a valid Texas Driver's License. Physical Demands/Work Environment Work is performed primarily in the field and in and around food establishments. Subject to sitting, standing, walking, bending, reaching, kneeling, crouching, crawling, and lifting of objects up to 50 pounds. Exposure to variable weather conditions, general kitchen hazards, machinery with moving parts, extreme noise, hazardous chemicals, and potentially irate members of the public is involved. All full-time employees receive: 15 vacation days 11 paid holidays 15 sick days Retirement Plan (Texas Municipal Retirement System) with a two to one match Paid Health/Dental/Life Insurance Cafeteria Plan Emergency Leave Longevity Pay Free employee health clinic Tuition reimbursement Employer City of Longview Address 302 W Cotton St. Longview, Texas, 75601 Phone ************ Website *********************************

Job SummaryWe are seeking a dynamic Property Inspector/ Handyman to join the team at our successful property management company. The Property Manager is responsible for performing property inspections to ensure that the property is ready for the upcoming guest. Responsibilities Visually inspect properties for damages Clean after cleaner if cleaner missed anything Report any damages Supply shopping if needed Very maintenance task like cleaning out air filters ane etc Perform any small maintenance repair as needed Starting laundry for cleaner Answer emails and phone calls as needed Miscellaneous administrative job responsibilities Other miscellaneous task assigned by owner Qualifications Must have a fuel efficient car Knowing Spanish would be a plus Having an inspector background would be a plus Must be detailed oriented and willing to learn the business Compensation: $15.00 - $17.00 per hour

Petroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved. Shift Schedule: 24-hr on-call, 4 on / 4 off