Inspector jobs in Wichita Falls, TX

The Material Inspector will support the Project Quality team by overseeing material inspection control, documentation, and coordination for a new fabrication facility. This role ensures that all materials meet project specifications, quality standards, and compliance requirements. Key Responsibilities: Conduct inspections on delivered and installed materials per approved submittals and specifications. Review and verify Material Test Reports (MTRs), Certificates of Compliance (CoC), and Mill Test Certificates (MTC). Coordinate material sampling and testing with third-party agencies. Prepare and submit Material Inspection Reports (MIRs) for review and approval. Maintain inspection logs, including pass/fail records and corrective actions. Upload inspection data and documents into the Construction Project Management System (CPMS). Monitor on-site material storage, labeling, and handling practices. Support the issuance and closure of Non-Conformance Reports (NCRs). Collaborate with QA/QC teams, contractors, and client representatives. Qualifications: High school diploma or higher; associate degree preferred. Proficient in Microsoft Office (Excel, Word, Outlook). Strong documentation, reporting, and communication skills. Fluent in English (verbal and written). Preferred Experience: Background in semiconductor or high-tech industrial construction. Familiarity with QA/QC systems and reporting procedures. Bachelor's degree in Engineering, Construction Management, or related field a plus.

Commercial Independent Contractor for Insurance Loss Control. The physical characteristics, exterior measurements, general conditions, photographs, unusual hazards and recommendations associated with a property are part of our comprehensive reports that summarize the observable hazards associated with a risk. The above information is used by our client companies to determine whether a risk meets the carrier's eligibility requirements. Inspectors are the "eyes" for the insurance underwriter, who is generally in another area and confined to an office. Inspectors set their own hours and work schedules in which they organize to accommodate the needs of our clients. Insurance Inspector Independent Contractor Qualifications: Be an energetic individual capable of completing a high volume of insurance inspections. Be motivated, analytical, resourceful, decisive, and have good problem-solving skills. Have solid written, composition and verbal communication skills. Have a strong desire to succeed and work independently with limited direction & guidance. Be self-disciplined, organized and able to manage an aggressive workload and have the ability to prioritize and schedule inspections timely and efficiently. Not necessary but a plus: VIITA Certification, previous experience in construction/plumbing/electrical industries, life safety/firefighting, general contracting or property management. Insurance Inspector Technical Requirements: A Microsoft Windows based PC Windows 10 Google Chrome or Edge and Microsoft Internet Explorer 11 Adobe Acrobat Reader Broadband internet connection Digital camera or smart phone capable of interfacing with your PC Color inkjet or laser printer. Reliable, insured transportation and valid driver's license A measuring wheel, monopod and a clipboard. If you meet the above criteria, please submit your resume, accompanied by a short, but precise, cover letter explaining why you feel you are suited for this position. Candidates are subject to criminal background checks. If you meet our qualifications, you will be contacted immediately.

Petroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

Local Company / Welding InspectorPay: $88,000-$100,000 per year Depending on ExperienceHours: Monday - Friday Inspect stainless steel welds to ensure compliance with applicable codes, standards, and specifications Verify welder certifications, welding procedures (WPS), and inspection documentation Perform visual inspections and coordinate or conduct non-destructive testing (NDT) as required Review blueprints, welding symbols, and fabrication drawings Identify weld defects, nonconformances, and quality issues and document findings Work with welding and production teams to address and resolve deficiencies Maintain accurate inspection reports and quality records Ensure adherence to safety policies and quality assurance procedures Job Requirements: Current welding inspection certification (such as CWI or equivalent) required Proven experience inspecting stainless steel welds Strong knowledge of stainless steel welding processes and metallurgy Ability to read and interpret blueprints, welding symbols, and codes Familiarity with AWS, ASME, or other applicable welding standards Excellent attention to detail and documentation skills Strong communication and problem-solving abilities Applicant Requirements: Must have a clean background. Pass a drug screen.

Job DescriptionLocal Company / Welding InspectorPay: $88,000-$100,000 per year Depending on ExperienceHours: Monday - Friday Inspect stainless steel welds to ensure compliance with applicable codes, standards, and specifications Verify welder certifications, welding procedures (WPS), and inspection documentation Perform visual inspections and coordinate or conduct non-destructive testing (NDT) as required Review blueprints, welding symbols, and fabrication drawings Identify weld defects, nonconformances, and quality issues and document findings Work with welding and production teams to address and resolve deficiencies Maintain accurate inspection reports and quality records Ensure adherence to safety policies and quality assurance procedures Job Requirements: Current welding inspection certification (such as CWI or equivalent) required Proven experience inspecting stainless steel welds Strong knowledge of stainless steel welding processes and metallurgy Ability to read and interpret blueprints, welding symbols, and codes Familiarity with AWS, ASME, or other applicable welding standards Excellent attention to detail and documentation skills Strong communication and problem-solving abilities Applicant Requirements: Must have a clean background. Pass a drug screen.

Basic Qualifications: BASIC QUALIFICATIONS: High School Diploma or GED from an accredited institution. Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: Experience working in a manufacturing environment. Basic Computer skills. metal experience Job Summary: Works independently under department supervision along with a direct connection to the Quality department to direct the day to day activities of our final visual process for both HWF and HdM finished product. Daily focus on improving our quality Parts per Million (PPM) and our 1st time yields through final visual. Works with Visual Level III to eliminate the need for over-inspection at shipping. Helping Visual Level III for root cause problem solving is a major component of this position's responsibilities. This opening will be for B and D shift in the Main Plant. (7:00 p.m to 7:00 a.m.) These shifts rotate 2 on 2 off, 3 on 2 off, 2 on 3 off. This opening if for internal candidates only. ESSENTIAL FUNCTIONS: Using Computers (entering information, etc.) Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI). Must be able to function as a member of a team and be able to work under general supervision. Must be able to maintain expected quality levels. Comply with all site required policies and procedures including but not limited to: EHS, Quality, Code of Conduct, and the Wichita Falls Employee Handbook. Job Responsibilities: 1. Ensure compliance to customer visual specifications. 2. Help Visual Level III to identify problems and establish root cause solutions. 3. Communicate daily with the Visual Level 3. 5. Communicate daily with supervision regarding problems, decisions, and flow requirements. 6. Review castings as they are being finished in order to eliminate over and under working. Provide metal finishing employees with feedback on their quality performance. 7. Conduct necessary quality audits both before and after finishing. 8. Request Visual Level III to communicate with wax team and engineering to improve wax related quality issues. 9. Log information and generate data using databases and excel spread sheets. 10. Communicate with engineering on parts with poor process related quality i.e. splits, fins, plus metal. Contact supervisor and engineer. 11. Work to meet or exceed department and plant metrics for quality. 12. Other duties as required. ENVIRONMENTAL HEALTH AND SAFETY RESPONSIBILITES: Comply with all department, facility, corporate and regulatory EHS regulations Wear all required personal protective equipment (PPE). Requires wearing safety glasses, earplugs, gloves, and Metatarsal shoes. Report all job-related illness and injuries (Per Employee Handbook). Report all safety, health, and environmental concerns to your supervisor in a timely manner. Attend all EHS training. PHYSICAL DEMANDS/EQUIPMENT USED: 1. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employee is required to execute the following: Push pull and twist. Floor-to-waist lift and carry, lifting and carrying to the waist high level, carrying items with two hands. Gripping and pinching Reaching near, far, and overhead Hand/Arm Vibration Be able to climb ladders and stairs Moderate lifting > 50 lbs. Good manual dexterity to operate computer equipment and precision measuring instruments. Position may require more than eight hours daily and more than five days weekly to complete work assignments. Squatting/crouching/bending when retrieving stored items from lower shelves and file cabinets, moving equipment / product inspections, etc. Frequently Standing when gauging Frequent sitting when wall gauging or finishing. Clean work areas and maintain a clean work environment; perform 5S cleaning activities as required. 2. Skills and Abilities: Work requires basic skills in reading, writing, and arithmetic with the use of fractions and decimals. Must acquire knowledge for acceptable/non-acceptable requirements for castings by interpreting and understanding visual specifications as outlined by our customers and engineers. Ability to interpret moderate engineering detailed drawings. Must be able to perform multiple operations simultaneously. Must be able to teach others the appropriate techniques required to properly finish castings. Strong verbal and written communication skills are essential. Ability to travel if necessary. 3. Training: Required to pass Level II Proficiency test. Pass written and proficiency test. (finishing) 4. Equipment Used: Pin gauges Computer and software Borescope Flat gauges Calibrated wire gauges Auto scope Work Environment: (Chemical and Physical Exposures): May be exposed to noise, oil, dust, fumes, chemicals, heat and cold. Requires wearing of safety glasses, metal tarsal shoes, hearing protection and gloves.

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR viz XAhkYEG

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Distribution Inspector 3Location: Tulsa, OKKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards.Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities.Ensure all inspections meet or exceed industry regulations and standards.Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection.API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting.Strong communication skills with the ability to work effectively in a team environment. C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry.

Our Company: Established in 2012, Seek Now captures robust property data to meet the needs of customers across the insurance and real estate industries. With more than 2 million property inspections completed to date while currently servicing 3,000 properties per day, Seek Now is the leading data capture and inspection services firm serving 240+ customers. Our mission is to help our customers make faster decisions and improve economic outcomes, all while providing a stellar customer experience. We accomplish this through continuously reimagining how information is captured, transformed, and transmitted across all the industries we serve. Our vision is to be the leading provider of on-demand, ground truth property data solutions. We do this while creating individual growth opportunities for our employees, expanding network of Seekers, and value add partners. Summary: Seek Now is searching for capable 1099 independent sub-contractors to provide accurate, impartial, and complete home and commercial property inspections. Our 1099 Field Inspectors are the frontline experts who assist and collect data for our clients in the Property Insurance, Facility Management, and Real Estate sectors. Essential Expectations: Ability and willingness to access and inspect steep and/or high roofs Lift, carry, and set up ladders and other equipment up to 100 pounds Sketch and measure roof and/or room components Scope the area of different sized and shaped roofs, rooms, and other inspection areas Perform accurate, impartial, and complete inspections, which includes but is not limited to identification of age and condition Travel to perform inspections in areas hit by weather catastrophes when needed, which includes assignments averaging two (2) to six (6) weeks at a time Lodging is provided by Seek Now which can include having a fellow Seek Now Sub-Contractor as a roommate Ability to take assignments on short notice and complete all aspects of job assignments as defined Represent our Core Values: Self-Starter, Visionary & Strategic, Lead with Humility Strong attention to detail, organization, and time management skills with a focus on professionalism and customer service Document inspections using our proprietary software application on your smartphone device Be comfortable covering a 100-mile radius around your home market Flexible in job assignment scheduling Ability to utilize other equipment as needed including 3D Cameras, Drones, Moisture meters Preferred Qualifications: Roofing sales or construction experience Property Insurance experience Haag Certification Ability to use a 40'-foot ladder Minimum Requirements: A clean and reliable truck, van, or SUV that is capable of transporting a 32' ft ladder safely An operational laptop and smartphone Ability to travel, especially during catastrophic events such as hurricanes and tornadoes Ability to earn HAAG Certification within 90 days Ability to use a laptop and a smartphone, which includes navigating between applications, entering data, and using Microsoft Office products Ability to submit complete, quality reports on time 32-foot ladder Professional appearance Valid driver's license State Issued Workers Compensation Certificate of General Liability Insurance LLC Articles or Certificate of Organization 1099 independent contractor Seek Now operates 7-days a week, providing you the opportunity to be flexible with your availability Great earning potential - six figures Paid weekly. Team-first environment State-of-the-art, technology-based tool for inspections Strong support team for our 1099 independent contractor field inspectors Hotel fees paid/reimbursed on CAT jobs Other Requirements: Professional appearance Valid driver's license State Issued Worker's Compensation Certificate of General Liability Insurance LLC Articles or Certificate of Organization Position Type and Hours: 1099 independent contractor Seek Now operates 7-days a week, providing you the opportunity to be flexible with your availability Benefits and Perks: Great earning potential - six figures Paid weekly Team-first environment State-of-the-art, technology-based tool for inspections Strong support team for our 1099 independent contractor field inspectors Hotel fees paid/reimbursed on CAT jobs Disclaimer: This description is not designed to cover or contain a comprehensive listing of activities, expectations, or functions that are required of the contractor.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures * Ensuring Compliance with Procedures * Dealing with Coworkers/Clients/Public JOB DUTIES: Responsibilities may include, but are not limited to: * Monitoring and reporting on COMBS warehouse supply procedures. * Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. * Investigate and submit items for warranty claims when required. * Accomplishing forms and documentation reviews as required. * Advises management on revising inspection/receiving regulations, as required, to meet contractual requirements. * Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to be damaged when received. * Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. * Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. * Accomplishing site training for new personnel and assisting with training records maintenance. * Monitor and maintain tool calibration and assist with GSB maintenance as needed. * Setting up and maintaining the Technical Library. * Performing QEC installation inspections. * Cleaning of warehouse, shops, offices and restroom as required. * Clerical and other assigned duties as required. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). * Thorough knowledge of warehouse shipping and receiving procedures. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. * Education and Experience: * Valid FAA Airframe and Powerplant Certificate. * Graduation from a standard four (4) year high school or equivalent (GED) AND a Minimum of FIVE years' recent experience in aircraft maintenance. * Documented proof of aircraft mechanic experience. Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures Ensuring Compliance with Procedures Dealing with Coworkers/Clients/Public JOB DUTIES: Responsibilities may include, but are not limited to: Monitoring and reporting on COMBS warehouse supply procedures. Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. Investigate and submit items for warranty claims when required. Accomplishing forms and documentation reviews as required. Advises management on revising inspection/receiving regulations, as required, to meet contractual requirements. Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to be damaged when received. Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. Accomplishing site training for new personnel and assisting with training records maintenance. Monitor and maintain tool calibration and assist with GSB maintenance as needed. Setting up and maintaining the Technical Library. Performing QEC installation inspections. Cleaning of warehouse, shops, offices and restroom as required. Clerical and other assigned duties as required. QUALIFICATIONS: Knowledge, Skills, and Abilities (Required Skills include the ability to:) Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). Thorough knowledge of warehouse shipping and receiving procedures. Ability to communicate effectively, both orally and in writing. Ability to deal courteously with the customer. Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. Education and Experience: Valid FAA Airframe and Powerplant Certificate. Graduation from a standard four (4) year high school or equivalent (GED) AND a Minimum of FIVE years' recent experience in aircraft maintenance. Documented proof of aircraft mechanic experience. Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

**ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures + Ensuring Compliance with Procedures + Dealing with Coworkers/Clients/Public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Monitoring and reporting on COMBS warehouse supply procedures. + Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. + Investigate and submit items for warranty claims when required. + Accomplishing forms and documentation **reviews as required.** + **Advises** management on revising inspection/receiving regulations, _as_ required, to meet contractual requirements. + Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to **be damaged when received.** + Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. + Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. + Accomplishing site training for new personnel and assisting with training records maintenance. + Monitor and maintain tool calibration and assist with GSB maintenance as needed. + Setting _up_ and maintaining the Technical Library. + Performing QEC installation inspections. + Cleaning of warehouse, shops, offices and restroom as required. + Clerical and other assigned duties as required. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities** (Required Skills include the ability to:) + Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). + Thorough knowledge of warehouse shipping and receiving procedures. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. + **Education and Experience:** + Valid FAA Airframe and Powerplant Certificate. + Graduation from a standard four (4) year high school or equivalent (GED) **AND** a Minimum of **FIVE** years' recent experience in aircraft maintenance. + Documented proof of aircraft mechanic experience. **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Job Description is located in Lawton, Chickasha, or Duncan Oklahoma Social Services Inspector Annual Salary: Level III H22C - $48,365.49 + Full State Employee Benefits may require extended work hours, including weekends and on-call hours. Travel is extensive. Must posses a valid driver's license and maintain required car insurance. Basic purpose: Positions in this job family are assigned responsibility for conducting internal and external audits and field investigations and performing federally or state mandated quality control audits to evaluate the effectiveness of agency programs. Some positions will perform follow-up reviews and advocate for clients and program changes. Duties include investigating welfare fraud and employee violations of agency policy, regulations and applicable state and federal laws. Some positions in this job family will conduct investigations and inquiries to protect the rights of clients, act as client advocate and file grievances on behalf of clients. Minimum Qualifications: Social Services Inspector, Level III A bachelor's degree and four years of professional experience in investigation, auditing, social work, juvenile justice, personnel administration, law enforcement or child support enforcement, working with persons with intellectual disabilities. OR an equivalent combination of education and experience. Job Responsibilities: The Social Service Inspector III investigates complaints of abuse, neglect and exploitation of persons 18 years of age and older residing in long-term care facilities in the State of Oklahoma including more difficult cases which can be high profile and provides service planning. The SSI III also serves as mentor & coach for new Social Service Specialists staff & assists them in completing training exercises. The SSI III will prepare case reports and submit to DA. ___________ If you have questions, please contact ********************* OKDHS is a Fair Chance Employer. This is a position in the Oklahoma Civil Service. Announcement Number: 25-GH225 83001611/JR53317 Powered by JazzHR iS5Wi1Px2i

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Comanche, Cotton, Jefferson, Stephens, Tillman Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

BRIEF DESCRIPTION: State of Texas License as a Journeyman or Master trade certification required. Plumbing Experience Preferred The purpose of this position is to inspect structures to ensure that all trades and construction comply with building, zoning and municipal codes. This is accomplished by reviewing requests, assisting with reviewing and interpreting plans, inspecting structures and projects, testing construction materials, meeting with contractors, builders and homeowners, enforcing codes; and issuing permits. Other duties include responding to requests, answering inquiries, researching codes, coordinating work with all inspectors, Inspection of construction complaints and other violations of City zoning and construction ordinances, filing and maintaining documentation and solving problems through knowledge and certifications with the International Code Council, State of Texas and knowledge of local ordinance requirements gained through on the job training. Plumbing Experience Preferred LICENSING REQUIREMENTS: Driver's License Required - Y Type - C Endorsements - N/A OTHER REQUIREMENTS: State of Texas License as a Journeyman or Master trade certification required ESSENTIAL FUNCTIONS: Note: This information is intended to be descriptive of the key responsibilities of the position. The list of essential functions below does not identify all duties performed by any single incumbent in this position. Additionally, please be aware of the legend below when referring to the physical demands of each essential function. (S) Sedentary (L) Light (M) Medium (H) Heavy (V) Very Heavy Exerting up to 10 lbs. occasionally or negligible weights frequently; sitting most of the time. Exerting up to 20 lbs. occasionally; 10 lbs. frequently; or negligible amounts constantly; OR requires walking or standing to a significant degree. Exerting 20-50 lbs. occasionally; 10-25 lbs. frequently; or up to 10 lbs. constantly. Exerting 50-100 lbs. occasionally; 10-25 lbs. frequently; or up to 10-20 lbs. constantly. Exerting over 100 lbs. occasionally; 50-100 lbs. frequently; or up to 20-50 lbs. constantly. # Code Essential Functions 1 L Regular and reliable attendance in compliance with given schedules is a mandatory requirement of this position. Schedules may be subject to change with or without advance notice. 2 L Inspects structures for compliance with the International Residential, Building, Plumbing, Electric, Gas, Mechanical, and Energy codes, and with City ordinances and state laws. Reviews plans for code compliance, interprets codes, investigates complaints of unauthorized installations or hazards, approves or denies the installation of construction materials, and provides additional information to site owners and construction personnel. 3 S Maintains records and documents on all inspections and investigations by recording progress of construction work, reviewing and comparing estimates from contractors, preparing reports, entering information, and maintaining records and documents. 4 S Reviews plans, applications and other requests by answering customer inquiries and providing information, conferring with architects, contractors, engineers, builders and homeowners, explaining codes and ordinances, observing violations and construction while driving and scheduling inspections. 5 S Responds to phone and walk-in requests by providing information on programs and services, answering specific inspection questions and recording inspection requests. 6 S Maintains residential and irrigation plans, and issues permits. 7 S Specializes in multiple of the following inspection types: Electrical, Plumbing, HVAC/ Mechanical, Structural, Roofing, Backflow, or other inspections of construction to ensure compliance with local and State adopted Building Codes Experience-Related Requirements Over two years and up to and including four years. Vocational/ Educational Preparation Requires High school graduation or GED equivalent supplemented by specialized courses/training equivalent to completion of one year of college Position : 5413003 Code : 5413-1 Type : INTERNAL & EXTERNAL Location : INSPECTION Grade : NE 113 Job Family : 47-4011 CONSTRUCTION & BUILDIN Job Class : BUILDING INSPECTOR Posting Start : 06/11/2025 Posting End : 12/31/9999 HOURLY RATE RANGE: $25.47-$28.02

Who we are looking for: ACV Auctions is looking for an enthusiastic Inspector who has a knack for cars and wants an opportunity to join a growing company. Our Inspectors are the face of our company. They know a ton about cars, and love to talk about them - explaining to our clients what they need to know in a way they can understand. They have boundless energy and work tirelessly to ensure our clients get nothing but the best. Our inspectors are meticulous. Nothing gets by them. At ACV Auctions we pride ourselves on Trust, Transparency, Credibility, and Customer Service and our Inspectors deliver this to our customers every day. What you will do: Actively and consistently support all efforts to simplify and enhance the customer experience. Partnering with a Territory Manager and a team of Inspectors, conducts inspections of vehicles at dealerships, auctions, and off-lease, to detect damage, missing parts and mechanical problems. Prepare and submit a report of vehicle condition, repair/replacement cost estimates, and related documentation. Help sales team up-sell or cross-sell services and products. Interface regularly with our dealers to develop and ensure client satisfaction and build strong relationships. Travel to & from dealerships and homes to inspect, and write condition reports, list vehicles to sell on the auction platform. Take multiple, overall, and damage photos match them to a vehicle, and download them to the image server utilizing the company issued smart phone. List inspected wholesale vehicles utilizing ACV Auctions platform for bidding and purchasing. Sign up independent dealerships as buyers to utilize ACV Auctions digital platform. Perform additional duties as assigned. What you will need: 1 year(s) Experience in the automobile field (body, paint and mechanical repair knowledge) with customer service background. Ability to read, write, speak and understand English. Ability to work outside in the elements for extended periods of time. Problem solving aptitude to meet challenges with resourcefulness and innovative approaches. Proven success to work independently with minimal supervision while working in a team environment. Excellent communicator with the ability to understand customer needs and expectations. Valid driver's license and use of a validly registered and insured motor vehicle required. Knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based applications. Ability to perform manual labor such as standing for extended periods, lifting up to or more than 25 lbs, bending, and squatting. Ability to drive a manual & automatic transmission. Vision abilities required to properly identify small defects around and underneath vehicles. #LI-HU1

Knowledge in building trades 134850001 Code : 5804-1 Type : INTERNAL & EXTERNAL Grade : GENERAL FT 09 Job Family : COMMUNITY ENRICHMENT DEPT Job Class : BUILDING INSPECTOR Posting Start : 11/18/2025 Posting End : 12/31/2099 MINIMUM HOURLY RATE: $20.89

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. 4 days on 4 days off (Rotational).12-hour shifts.