Inspector jobs in Wilmington, DE

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job Description The Quality Inspector's role is to utilize curtainwall knowledge alongside 2D and 3D engineering / CAD drawings to identify potential quality and installation issues in curtainwall components or units. A Quality Inspector may be assigned work in different areas, depending on production requirements. All Quality Inspectors are required to abide by all applicable New Hudson Facade requirements, as outlined in the Employee Handbook. Quality Inspectors directly report to the Quality Supervisor. Role and Responsibilities: Inspect and approve curtainwall components or units at various points of the manufacturing process for compliance with curtainwall quality/cleanliness expectations. Inspect and test incoming materials (aluminum, glass, stone, machined parts, etc.) against drawings, procedures and other defined quality standards; enters inspection results in Epicor; maintains various inspection logs and spreadsheets; inspects completed curtain wall units and crating. Enters NCRs for discrepant materials as found after inspection; assists the QC Coordinator in tagging and managing rejected parts. Read and manipulate 2D / 3D engineering CAD drawings to determine if curtainwall units and its individual components are fabricated and installed correctly. Communicate with upstream quality / assembly personnel when quality issues are identified. Provide information that can support the quality of the completed curtainwall unit. Maintain inspection logs and spreadsheets, as needed. Utilize ADP / Epicor to track hours spent supporting projects. Comply with all safety standards and requirements defined by NHF. Care of all assigned tools (calipers, spectrophotometers, protractors, etc.). Other tasks as required by management. Skills and Abilities: Experience working in a heavy manufacturing or large-assembly environment. Ability to read and understand 2D engineering drawings. Familiarity with manipulating 3D engineering drawings on CAD software. Advanced knowledge and experience with measurement tools (Tape measure, caliper, protractor, etc). Ability to act with professionalism; ability to multitask. Ability to follow both written and verbal instruction. Communication skills (both written and verbal). Physical Requirements: Ability to move equipment weighing up to 50 pounds. Applicants must be able to perform repetitive lifting and other physically demanding tasks. Qualifications and Education Requirements: HS Diploma AS Degree or higher preferred. Experience in the curtainwall / construction industry preferred. New Hudson Facades is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

About the Role: TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. About TAI: TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. Here's a glimpse into your day to day: * Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. * Ensure project deliverables meet TAI and client expectations * Manage all phases of a project - setup, execution, and closeout * Develop and maintain project schedules and budgets. * Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. * Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. * Perform overall project quality control. * Visit field to scope out projects. * Support proposal development by assisting with scope development, cost estimating and execution plan coordination. * Experience and knowledge of Magnetic Flux Leakage Technology (MFL). * Experience and knowledge of floating roofs and seal inspections. * Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Conduct daily safety risk assessments on routine and non-routine job tasks. * Scheduling activities related to inspection. * Prepare isometric drawings and field sketches of piping for pipe inspections * Review and interpret P&ID's * Writes detailed inspection reports and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. You'll be a perfect fit if you have: * High School Diploma, some college coursework preferred. * API 653 Certification. * Have a minimum of 10 years' experience working as an API Inspector within related industry * At least 5 years' experience managing large Above Ground Tank Inspection projects. * Prior experience supervising a project team * Self-motivated individual with the ability to work independently and oversee large projects. * Experienced with using Magnetic Flux Leakage Technology (MFL) * Demonstrated ability to perform complete inspection reports for equipment or piping. * Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. * Documentation: Clarity, comprehensiveness, and professional presentation of reports. * High reach operation ability. * Demonstrated leadership, interpersonal and communication skills. * Travel: Will travel up to 50% out of town. Physical Requirements: * Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. * Must be able to remain in a stationary position as necessary to complete assigned tasks. * The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. * Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. * Must be able to ascend and descend a large quantity of stairways at any given time. * Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. * Occasionally lift and move equipment in excess of 100lbs in a safe manner. * Must be able to work in outdoor weather conditions as needed. Compensation and Benefits: * Pay: $55-65/hour (based upon experience) * Annual Profit Sharing Bonus (variable) * PTO and Paid Holidays * Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! * 401(k)with employer match Other Offerings: * The opportunity to make a real impact on a variety of industry-leading projects. * The ability to balance your work and family activities. * Flexible work schedule * Work in a dynamic and collaborative environment that values creativity and innovation. * A chance to learn and grow alongside some of the brightest minds in engineering. * Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at ***********************

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

**About the Role:** TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. **About TAI:** TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. **Here's a glimpse into your day to day:** + Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. + Ensure project deliverables meet TAI and client expectations + Manage all phases of a project - setup, execution, and closeout + Develop and maintain project schedules and budgets. + Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. + Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. + Perform overall project quality control. + Visit field to scope out projects. + Support proposal development by assisting with scope development, cost estimating and execution plan coordination. + Experience and knowledge of Magnetic Flux Leakage Technology (MFL). + Experience and knowledge of floating roofs and seal inspections. + Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. + Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. + Conduct daily safety risk assessments on routine and non-routine job tasks. + Scheduling activities related to inspection. + Prepare isometric drawings and field sketches of piping for pipe inspections + Review and interpret P&ID's + Writes detailed inspection reports and maintains documentation of inspection activities. + Identifies circumstances that necessitate the use of proper safety procedures and equipment. + Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. **You'll be a perfect fit if you have:** + High School Diploma, some college coursework preferred. + API 653 Certification. + Have a minimum of 10 years' experience working as an API Inspector within related industry + At least 5 years' experience managing large Above Ground Tank Inspection projects. + Prior experience supervising a project team + Self-motivated individual with the ability to work independently and oversee large projects. + Experienced with using Magnetic Flux Leakage Technology (MFL) + Demonstrated ability to perform complete inspection reports for equipment or piping. + Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. + Documentation: Clarity, comprehensiveness, and professional presentation of reports. + High reach operation ability. + Demonstrated leadership, interpersonal and communication skills. + Travel: Will travel up to 50% out of town. _Physical Requirements:_ + Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. + Must be able to remain in a stationary position as necessary to complete assigned tasks. + The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. + Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. + Must be able to ascend and descend a large quantity of stairways at any given time. + Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. + Occasionally lift and move equipment in excess of 100lbs in a safe manner. + Must be able to work in outdoor weather conditions as needed. **Compensation and Benefits:** + Pay: $55-65/hour (based upon experience) + Annual Profit Sharing Bonus (variable) + PTO and Paid Holidays + Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! + 401(k)with employer match **Other Offerings:** + The opportunity to make a real impact on a variety of industry-leading projects. + The ability to balance your work and family activities. + Flexible work schedule + Work in a dynamic and collaborative environment that values creativity and innovation. + A chance to learn and grow alongside some of the brightest minds in engineering. + Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at *********************** TAI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

RK&K is hiring a Building Construction Inspector to monitor active construction sites and perform complex and routine inspections of construction to ensure structures and facilities have been built in compliance with building codes and ordinances. Location will be Cecil County Maryland. Essential Functions Inspect facilities during various stages of construction and remodeling to ensure compliance with applicable codes, ordinances and regulations Examine plans and specifications of new construction, additions and alterations to facilities to determine compliance with the provisions of applicable city, state, and federal construction codes, ordinances, rules, and regulations Inspect existing buildings and premises for change of use, occupancy, or compliance with applicable codes and ordinances Inspect foundation, concrete, steel, masonry, wood construction, framing, plumbing, heating and electrical installations and a large variety of other complex and routine building system elements Directly responsible for reporting on-site activities and daily progress Responsible to be able to witness, understand, and verify all required on-site testing is being performed in accordance with applicable standards Maintain project records, files and reports regarding inspections and follow-on activities Required Skills and Experience High School diploma or equivalent Experience inspecting for compliance with local Building and Plumbing codes as well as the National Electric Code and UL compliance Experience inspecting HVAC installation including balance and alignment testing Experience with inspection of pumping units, including controls Experience with both installation and testing of fire alarm systems and fire suppression systems Experience interacting with local code inspectors, permitting agencies and the fire marshal. Must be able to operate basic Microsoft Office Applications, Laptop and iPad Excellent communication skills Ability to read and interpret construction drawings and specifications Ability to pass Criminal History Background Check (CHBC) Valid driver's license and favorable driving record Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today! Pay Rate: $30 - $38 per hour

Job Description Job Summary: The State Inspector is responsible for examining motor vehicles to ensure vehicles operating on state highways meet all requirements established by the Maryland's department of motor vehicles. ******* $5000.00 DOLLAR SIGN ON BONUS ******* Benefits Competitive Pay- 70k - 120k yearly pay. This is a flat-rate position hourly rate pending on experience Full Benefits Package - Medical, Dental, Vision, matching 401k, and Life Insurance, disability, cancer, accident, hospital and critical illness Opportunities for growth Paid vacation 15 days depending on years of service 5 days of sick leave Paid leave up to 6 holidays Up to 3 days of bereavement leave Employee assistance program; and unpaid personal leaves absence (in limited circumstances) Employee discount program Friendly work environment $500.00 monthly tool allowance Qualifications Certified auto technician needed to perform Maryland safety vehicle inspection for our used car department must have a least 1 yr experience as a Maryland state inspector Valid Driver's License Maryland State Inspectors License Previous experience required Willing to to submit to a drug screen and background check prior to employment B level qualifications, including Diagnostic, Electrical and Engine Repair Excellent customer service skills Basic Computer skills Team player Ability to learn new technology, repair and service procedures and specifications Able to operate electronic diagnostic equipment Responsibilities Conducts vehicle inspections for mechanical services Assist in the Tire installation, balancing, and repairing Perform schedule maintenance services on vehicles Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed Providing an estimate of time needed for additional repairs Executing repairs under warranty to manufacturer specifications Apple Auto Mitsubishi employees can enjoy a family work environment that cares for its employees and offers a full range of benefits and a competitive pay structure. Apple is looking for employees to help our growing business. We are looking for candidates for every department in our dealership. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. Operate vehicles during the emissions system test and use exhaust analysis equipment. Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. Other job duties as assigned. No experience required; we will train you! Requirements: Must be 18 years of age. Valid and unrestricted driver's license. Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. Physically able to lift, push, and pull up to 20 lbs on an occasional basis. Basic computer skills. Full-time hours requirement is 40 hours a week. Qualifications: Team player. Excellent customer service skills. Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. Work in an environment that includes vehicle exhaust fumes, noise, and heat. Work in all weather conditions. Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

The NDT Advanced Services CWI Inspector is responsible for performing visual inspections on welded products and structures to ensure that work produced by welders meets specifications in NDT services. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values. * Performs internal and external inspections to determine if welded products and structures meet the acceptance criteria of a specific code, standard or document. * Properly interprets regulations, codes, and industry standards. * Ensures work is implement as required by project specifications. * Compiles and submits completed inspection reports in a timely manner. * Completes the Inspection, Test Plan and status report. * Reviews surveillance documents for any issues. * Schedules and conducts Pre-Inspection Meetings. * Communicates regularly with customers on scheduling activities as detailed by the customer. * Plans travel and surveillance activities/ visits to effectively utilize time and minimize expenses. * Maintains the Inspection Folder. Job Qualifications * High school diploma or equivalent preferred * Previous industry related inspection experience preferred. * SCWI, CWI or CAWI certification required. * Must be able to pass a Vision Test. * Travel Requirements: 0% - 50% Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills * This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting. Documents include electronic, hard or soft copies. This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor. The Field Resource Inspector will work independently or with other resources depending on the task being performed. The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus. The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services. Safety is our number one priority and will be embedded into every discussion, meeting and project. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Field Resource Inspection Technician is responsible for performing the inspection services. They are to be on time and complete work scheduled. The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. * All required job information should be completed promptly via the required tools and resources. * Must be familiar with all forms of low slope roofing systems. * Must be knowledgeable with Tremco line of products and proper applications * Daily responsibilities include, but are not limited to: * Review and confirm all work orders scheduled. * Completion of all safety related activities using the designated tools mandated by Tremco * Take photos to document phases of work performed on the job * Job Site Inspection specific: * Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific * Check materials for specification compliance, material type and proper storage * Walk the roof with the Foreman. Address proper drainage, staging, application and details * Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.

At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life for our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. As with all s at R-V, this job is considered safety-sensitive. GENERAL JOB DESCRIPTION We are seeking an experienced Quality Inspector to join our team at our Honey Brook and Morgantown, PA locations. This position is responsible for providing day-to-day quality engineering support within our General Fabrication, ASME Section VIII, and NQA-1 markets. This position will play an integral role in the growth and improvement of the RVII organization through elevating first pass quality, increased project throughput, on-time delivery, and project expectations. DUTIES/RESPONSIBILITES Provide technical support to RVII manufacturing facilities Supports gathering and presenting key KPI measurements to the organization Participate in pre-job contract review. Develop and implement inspection and test plans for manufactured and purchased components Interface with vendors to ensure timely resolution of Quality non-conformances Conduct internal quality system process audits Coordinate and host outside inspection agencies and customer inspectors Prepare, revise, and implant Quality System procedures, policies, and work instructions Conceptualize and analyze designs to ensure technical outcomes are consistent with customer and company specifications Perform non-destructive and dimensional inspections in accordance with approved procedures, customer specifications, and governing codes. Maintain control and maintain an inventory of non-conforming products. Review contracts to determine deliverables and ensure compliance with specifications Plan, schedule, and coordinate NDE Inspection activities daily in conjunction with the manufacturing department. Maintain adherence with all M&TE requirements, testing requirements, and procedures SKILLS/QUALIFICATIONS NDE (Non-Destructive Evaluation) qualifications - minimum of Level II in VT/MT/PT/BLT/UT-T Must possess a valid American Welding Society - Certified Welding Inspector credential Must have advanced knowledge of ASME Y14.5 specification Must have fundamental knowledge of ASME Sections VIII and V Prior experience with ASME NQA-1 and 10CFR50 Appendix B preferred Ability to work independently and direct coworkers Bachelor's degree in engineering or quality related field with 2+ years of experience or 10+ years in Quality Control role Strong verbal and written communication skills Self-motivated with attention to detail and accurate reporting Proficient in MS Office suite products EDUCATIONAL/PHYSICAL REQUIREMENTS Two- or four-year college degree or relevant experience in inspection activities Everyday bending, crouching, stooping, standing, and overhead reaching Everyday exposure to moving machinery, dust, dirt, grease or other disagreeable elements Lifting up to 50-75 lbs. Must be able to pass and complete a physical assessment Must be able to perform the essential functions of the job with or without accommodation R-V Industries, Inc. is an equal opportunity employer. R-V Industries, Inc. is an equal opportunity employer. Monday-Thursday 6:00 am - 4:00 pm

America's 1st online casino is hiring! At Evolution, our talent is live, the players are virtual. Every day, thousands play with real money, from their mobile devices, on one of our 50+ games. Since 2006, Evolution has been the leading product company of virtual casino games. We've evolved the gaming industry by designing and hosting the most streamed, interactive casino tables and slots in the world. Our North American talent broadcasts 24/7 from our studios in Atlantic City, New Jersey, Southfield, Michigan, Philadelphia, Pennsylvania, Fairfield, Connecticut and Vancouver, Canada. Job Description To work within your own team to produce the required results and to meet company targets respecting deadlines. Inspect a set number of boxes per day, with precision and accuracy Spot errors and defects in cards and follow the proper procedure for replacing or removing. Inform the manager about any type of incident. Set up card boxes for card change procedures Strong record-keeping Qualifications Must be able to work a flexible schedule including weekends and holidays. Must be 18 years of age or older. Required to successfully complete pre-employment drug background checks. Service-minded with excellent communications skills and a positive attitude The ability to work as part of a team and be adaptable to changing business needs 1+ years of work experience in a service-oriented role Responsible, dedicated, and dependable Additional Information This position is an excellent opportunity to join the fast-growing team, we also offer: $16/hr entry level with opportunity growth 10 days of Paid Time Off Annually 5 Sick Days Paid Break Time 401K Match Technique Training & Career Growth Opportunities Centrally located modern studio environment with break room & refreshments Evolution is a market-leading developer and provider of products and services for online casino entertainment. Our excellence is driven by over 16,000 EVOlutioneers across 30 markets worldwide, working in product innovation, software development, IT solutions, game hosting and business support. Evolution's dynamic and creative environment creates a unique opportunity for personal and professional growth. Our integrated business-to-business solutions guarantee that our clients can always provide an unrivalled online entertainment experience to their players globally. We thrive on remaining an award-winning digital powerhouse of entertainment products and services with an ever-expanding line-up of product brands: Evolution Live, NetEnt, Red Tiger, Ezugi, Big Time Gaming, Nolimit City and DigiWheel. Evolution is a Swedish company founded in 2006 and listed on Nasdaq Nordic (EVO). Evolution USA was established in 2018. More information on Evolution.com. For more information visit ***************** All your information will be kept confidential according to EEO guidelines.

At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Salary: Do you want to work for a construction company unlike any other? At JGM, we challenge the industrys status quo. Known as the team that delivers When You Need It Yesterday, weve built a culture around safety, quality, and speed. At JGM, were more than a company-were a family. Working side by side, we support one another, building trust by knowing we can count on each other. Driven by our core values, mission, and purpose, we stay focused on our vision for the future. The result? A team environment that fuels exceptional employee satisfaction, which in turn drives extraordinary client experience and continued company growth. The only question is: Are you ready to join our growing family and be part of something truly special? Be an integral part of the JGM family by living our core values: We Plan. We Adapt. We Succeed. Uncompromising Safety & Quality. Family is Our Foundation. Create Value Through Better Solutions. Whatever it Takes. Commitment to Self-improvement. Our Purpose (FOREVER): Develop Elite Leaders Today, So We Can Build Tomorrows Future Our Vision (ONE DAY): Driven to be the Safest, Fastest, and Most Effective Industrial Construction & Fabrication Partner in North America Our Mission (TODAY): Solve Our Clients Toughest Challenges with Safety and Quality Top of Mind Position Overview JGM is seeking a talented QC Inspector to join our growing team! The perfect candidate is a professional who thrives on tackling challenges in an exciting, fast-paced environment. This position will inspect raw materials, in-process work and finished products for conformance to shop drawings, specifications, and codes by performing the below duties. Responsibilities Conduct complete layout inspections, measuring dimensions (length, height, angles, radii, etc.) using precision instruments (micrometers, calipers, gauges, etc.) to ensure compliance with drawings, specifications, and codes. Verify quality at all stages: incoming materials, in-process work, and final products. Visually inspect parts, welds, bolts, coatings, and assemblies; compare pieces to detect variations; enforce standards and legal requirements. Interpret and apply shop drawings, specifications, ASTM codes, AISC standards, DOT requirements, and welding/bolting/painting codes. Maintain accurate inspection records, defect lists, and calibration of measuring equipment; coordinate with departments to resolve quality issues. Support operator training on measurement, visual acceptability, and processes; assist with internal and external audits. Manage NDE (Non-Destructive Examination) training, testing, certification, and documentation; maintain CWI certification. Review and approve quality-related purchase orders, reports, and testing requirements. Assist in developing procedures, quality summaries, and corrective actions; enforce non-conformance protocols. Serve as liaison with outside inspectors; investigate shop/field errors and support resolutions. Perform other QA-related tasks as required by supervision. Qualifications Strong knowledge of welding symbols and diagrams, and inspection tools. Highly proficient in reading blueprints and other printed instructional material. Basic Math & Geometry/Trigonometry. Familiar with variety of weld processes: Flux Core Arc Welding (FCAW), Sub Arc Welding (SAW), Gas Metal Arc Welding (GMAW), and/or Gas Tungsten Arc Welding (GTAW) Ability to perform and document inspection activities during fabrication and welding of structural piece members. Microsoft Office. CWI preferred. Self-motivated, collaborative team member. Safety focused. Operates equipment and champions safety initiatives. Education High School Degree or GED Equivalent preferred Minimum of seven years related experience and/or training in steel fabrication; or an equivalent combination of higher education and experience in the steel fabrication industry or closely related fields. Physical Requirements The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requires prolonged walking, standing, sitting, bending, squatting, stooping, climbing, regular lifting and carrying to move up to 50 lbs., talking, hearing, reaching, feeling, grasping, and push/pulling. Must be able to work in various weather conditions/temperatures. Regular mental and visual attention much or all the time with manual coordination. General office environment conditions. Flexibility required to travel. JGM offers a competitive wage and benefit package: Participate in the companys yearly performance bonus program Medical, Vision & Dental PTO & Holidays 401(k) + Matching Life Insurance Short/Long-Term Disability Employee Assistance Program Generous Referral Program Training and Further Education This job description is subject to change based on the needs of the business and is notall-inclusive. JGM is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Quality Control Inspector I is responsible for inspecting, testing, and auditing raw materials and finished products, as well as releasing finished products. Attention to detail is an expectation. Demonstration of commitment to patient safety and product quality by maintaining compliance with the Quality Policy and all other documented quality processes and procedures. Inspect and release raw materials, components, sub-assemblies, and finished devices according to procedure. Drives continuous improvement activities with cross-functional team members. Generate non-conformances and escalate to the Material Review Board in a timely manner. Interacts with production areas, manufacturing and design engineering, marketing, quality, and management. Job Duties: Promotes a work environment of continuous improvement that supports CQ Medical's Quality Policy, Quality System, and the appropriate regulations. Assists with communicating business-related issues or opportunities for improvement to management. Accountable for compliance with applicable US and International regulations and directives including, but not limited to, Food & Drug Administration (FDA), Canadian and European Union regulations. Works in a team environment to achieve metrics. Interprets engineering drawings, schematic diagrams, sampling tables, or formulas and confers with management or engineering staff to determine quality and reliability standards. Selects products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, mechanical, or chemical characteristics. Records test data, applying statistical quality control procedures using GMP documentation practices. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Quarantines all incoming material until testing is accepted. Quarantines all non-conforming material during any step of the manufacturing process until the Material Review Board dispositions the material. Purging of records as required. Maintains a neat and organized work area. Remains current on all required training. Conducts calibrations and works with 3 rd party calibration providers to ensure inspection equipment meets specifications. Conducts transactions in the Quality Management System and/or ERP system to detail the disposition of incoming and in-process materials. Working Conditions: 50 lbs. of lifting required for this role Hearing protection, safety glasses, safety shoes, and gloves are required for this role Required exposure to biohazard Job Qualifications: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of auditors or employees of our organization. Ability to interact effectively with individuals and teams. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percent, and interpret bar graphs. Decision-making ability. Ability to use testing equipment. Must be able to manage multiple tasks and perform with accuracy and a high attention to detail. Ability to identify priorities and function independently required. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Identify various discrepancies (product, process, documentation, etc.) Analytical and problem-solving skills. Computer proficiency, including data entry. MS Office Suite (Word, PowerPoint, and Excel) experience required. Education and/or Experience High school diploma or general education degree (GED). Medical device or manufacturing experience a plus. Preferred demonstration of leadership.

The Quality Control Inspector I is responsible for inspecting, testing, and auditing raw materials and finished products, as well as releasing finished products. Attention to detail is an expectation. Demonstration of commitment to patient safety and product quality by maintaining compliance with the Quality Policy and all other documented quality processes and procedures. Inspect and release raw materials, components, sub-assemblies, and finished devices according to procedure. Drives continuous improvement activities with cross-functional team members. Generate non-conformances and escalate to the Material Review Board in a timely manner. Interacts with production areas, manufacturing and design engineering, marketing, quality, and management. Job Duties: Promotes a work environment of continuous improvement that supports CQ Medical's Quality Policy, Quality System, and the appropriate regulations. Assists with communicating business-related issues or opportunities for improvement to management. Accountable for compliance with applicable US and International regulations and directives including, but not limited to, Food & Drug Administration (FDA), Canadian and European Union regulations. Works in a team environment to achieve metrics. Interprets engineering drawings, schematic diagrams, sampling tables, or formulas and confers with management or engineering staff to determine quality and reliability standards. Selects products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, mechanical, or chemical characteristics. Records test data, applying statistical quality control procedures using GMP documentation practices. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Quarantines all incoming material until testing is accepted. Quarantines all non-conforming material during any step of the manufacturing process until the Material Review Board dispositions the material. Purging of records as required. Maintains a neat and organized work area. Remains current on all required training. Conducts calibrations and works with 3 rd party calibration providers to ensure inspection equipment meets specifications. Conducts transactions in the Quality Management System and/or ERP system to detail the disposition of incoming and in-process materials. Working Conditions: 50 lbs. of lifting required for this role Hearing protection, safety glasses, safety shoes, and gloves are required for this role Required exposure to biohazard Job Qualifications: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of auditors or employees of our organization. Ability to interact effectively with individuals and teams. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percent, and interpret bar graphs. Decision-making ability. Ability to use testing equipment. Must be able to manage multiple tasks and perform with accuracy and a high attention to detail. Ability to identify priorities and function independently required. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Identify various discrepancies (product, process, documentation, etc.) Analytical and problem-solving skills. Computer proficiency, including data entry. MS Office Suite (Word, PowerPoint, and Excel) experience required. Education and/or Experience High school diploma or general education degree (GED). Medical device or manufacturing experience a plus. Preferred demonstration of leadership. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Looking to Supplement Your Income or Just Be Productive? Become an Independent Residential Insurance Inspector with CIS Group! Are you looking for a flexible, rewarding opportunity that allows you to be your own boss and take control of your schedule? CIS Group is seeking motivated, detail-oriented individuals to join our team as 1099 Property Insurance Inspectors. If you own an LLC and are looking to diversify your work, this might be the perfect opportunity for you! Why Work With Us? Since 1996, CIS Group has been one of the largest and most trusted names in the insurance inspection industry. We offer a platform that allows Independent Contractors to create and grow their own businesses, work flexible hours, and take on a variety of inspections. Whether you're supplementing your current work or looking for a new venture, this position offers flexibility and autonomy. What You'll Do: Travel to residential homes to complete exterior (interior photos here and there) property inspections. Take photos, collect property data, and upload your findings using your smartphone or tablet. Provide high-quality, professional service that delivers accuracy and on-time service, with exceptional communication. Maximize this opportunity by utilizing your unique skillset Watch this video to see an example of an exterior-only inspection: Click here to watch What We're Looking For: 1099 Independent Contractors - Be your own boss, set your own schedule! Flexible Hours - Work during daylight hours, Monday through Saturday. Comfortable Working Outdoors - This role requires you to work in various weather conditions. Tech-Savvy - A recent smartphone or tablet capable of taking and storing hundreds of photos. Computer Access - Wi-Fi-enabled for uploading data. Reliable Vehicle & Driver's License - Travel to residential properties within your area. Strong Communication Skills - You're a professional and a persistent communicator. You're not someone who just disappears when things get tough. Microsoft Excel Familiarity - Basic computer skills are necessary for managing your inspections. Compensation: Independent Contractors - You get paid per inspection. Fees - Vary based on location and inspection type, allowing for higher earning potential as you demonstrate competency. Why This Is Perfect for You: You've taught yourself how to solve problems and take on new challenges, and you're driven to succeed no matter the obstacles. This opportunity will allow you to create and or build your own business, and the flexibility to grow your income in an industry that remains resilient even through economic downturns. Ready to take control of your future and join a company that values your persistence and resourcefulness? Submit your resume now and become part of the CIS Group team! Pay = $990 monthly working 6 days per month

This is a Full Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Full-time hours requirement is 40 hours a week. Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

The NDT Advanced Services API Inspector is responsible for performing inspections in accordance with API standards designated equipment for purposes of recommending and approving repairs or certifying compliance. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values and Seven Critical Choices. * Performs internal and external inspections on equipment at scheduled intervals to maintain the mechanical integrity of fixed equipment. * Recommends and approves repairs as well as performs visual inspection of completed repair work. * Assists in scheduling activities related to inspection. * Writes detailed inspection and turnaround reports, and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate and deal with customers and other parties in such a manner as to benefit the professional reputation of the company. This communication is in person at the plant / job site. * Complete all required training, including tests, within Company guidelines. * Perform necessary filing of customer and company job related forms and paperwork. Job Qualifications * High school diploma or equivalent preferred. * Technical school or other related training preferred. * Previous industry related experience preferred. * Must possess valid API certification. * Must possess valid Driver's License. * Travel requirement: 0% - 50%. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis. * Candidate must be capable of climbing, working at high elevations and working in confined spaces. Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively. * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills. This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration