Installation technician jobs in Boston, MA - 3,404 jobs

A leading material handling solutions company is seeking a motivated Sales Technician in Boston. The ideal candidate will possess strong mechanical aptitude, communication skills, and experience in sales and technical support. This role focuses on developing customer relationships, providing on-site service, and ensuring equipment performance. Competitive salary range is $60,000 - $75,000 along with comprehensive benefits and opportunities for professional development. #J-18808-Ljbffr

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

About the Company - Here at Sagamore, we provide career opportunities to master your craft, earn competitive wages and make a real difference in the lives of our customers and our community. We are looking for employees who take pride in their work and see it as both an art and trade. You will work in an environment where your hard work is rewarded, recognized, and appreciated. Your daily contributions will have a direct effect on the success of the company and your future. If you want to be part of something bigger than just a job - make this career move and apply today! About the Role - Installs and repairs HVAC equipment, which may require performing basic maintenance, adding refrigerant, replacing defective parts, and installing or building new units. Uses diagnostic equipment to identify and address system problems. Refers to blueprints and schematics to install new systems and to troubleshoot, maintain, and repair existing equipment. Ensures lines, components, and connections are free of leaks and defects. Examines and tests systems using appropriate tools, gauges, and instruments. Removes and replaces ceiling and ductwork. Performs regular maintenance on compressors and motors, using appropriate diagnostic tools and devices. Maintains records of repairs, work hours, and underlying causes of system problems. Complies with federal, state, and local laws and requirements for refrigerant handling. On-Call rotation. Performs other duties as assigned. Responsibilities: Thorough understanding of the installation, maintenance, and repair of various HVAC systems. Ability to use diagnostic equipment. Requires working in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, precarious places, and risk of electrical shock (high voltage). This position is highly physical and requires regular use of hands, fingers, walking, stooping, climbing ladders and kneeling. It requires employees to regularly lift and/or move up to 50 pounds and occasionally lift or move over 50 pounds. Excellent problem-solving and analytical skills. Ability to use power and hand tools. Ability to follow instructions. Excellent mechanical skills. Excellent communication skills, as required to interact with customers. Valid Driver's License. EPA Universal. OSHA 10 or 30. NFPA 51b Hot Works. MA or RI Refrigeration License Benefits & Perks: Medical, Dental and Vision Insurance. Flexible Spending Account. 401k with Company Match. Profit Sharing Program. Short- and Long-Term Disability Insurance. Company Paid Life Insurance. Holiday Pay. Equal Opportunity Statement - Sagamore is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Responsibilities: Go to different client sites to diagnose and repair refrigeration and ice machine equipment. Completing the necessary paperwork Working with the parts department for precise parts identification and ordering. Making sure the parts are installed correctly Keep the service truck tidy and maintain an organized inventory of parts and tools. Working with the manufacturers, sales reps, dealers, and customers. Collaborate with manufacturers for equipment diagnosis when required. Qualifications: At least five years experience in refrigeration/ice machine equipment repair Previous experience in gas, electric, plumbing, and or steam repairs is a plus EPA certification required. Good customer service skills Able to multi-task and adapt to varying tasks Experience using various hand tools Valid drivers license Hours are: Monday through Friday - First Shift The pay is up to $115K a year based on experience Benefits: Companywide Incentive Compensation Plan Paid Lunch Paid Time Off 9 Company Holidays 401K - 4% Safe Harbor Match Holiday Pay $400 + Double Time On-Call Pay $300 + time and half Health Insurance (monthly contribution amount below) $1,000 Funded Health Savings Account Dental Insurance - 100% covered Vision Insurance Life Insurance 1X salary + option to buy up Long Term/Short Term Disability Insurance Company Vehicle, Gas Card, Cell Phone, Tool Allowance, Uniforms Regular Performance Reviews & Pay Increases OT availability Tuition Reimbursement

City Boston, Framingham, Marlborough, Nashua, Worcester State/Province Massachusetts, New Hampshire Country United States Department DIRECT SALES Date Monday, November 3, 2025 Working time Full-time Ref# 20036651 Job Level Specialist Job Type Experienced Job Field DIRECT SALES Seniority Level Associate Currency USD - United States - US Annual Base Salary Minimum 39,510 Annual Base Salary Maximum 79,020

Fiber Technician Job ID: 554165589 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary The Fiber Technician is a field position that directly works to help maintain and expand the fiber network as well as complete the following tasks along with additional duties as assigned. This position is an hourly position that will require the individual to always possess a valid driver's license, maintain a stellar driving record free from any major offences that may affect Lightpath' s MOD rating. The position is a hands-on labor-intensive job that requires a heavy amount of experience in fiber splicing, equipment installation, troubleshooting and cable placement. The work will take place in but is not limited to buildings, confined space, side of the roadway and aerial locations. This position will require off hours, weekend, and holiday work. In addition to being part of an on-call rotation in support of the network that will require being available during various holidays and weather events. Responsibilities Complete field survey of a path for a new cable to be installed within a building, conduit run or aerial pole path. Capture all the information related to the path using varioustools of technology anddocument in a step-by-step method of procedure, that will be customer facing. Lightpath to provide that form document. Ability to meet with representatives from different municipalities and review proposed projects, file, and submit permit applications, track the application, and follow up on its approval. Be able to communicate with other Lightpath employees to obtain any required information the municipality would request such as bonds and insurance documents or payments. Work directly with our customers in the field, take and perform calls and email to update on project status and share documentation on each project with co-workers. Track new and ongoing projects by maintaining numerous Project Trackers. AttendUtility, Municipal and customer meetings to review and obtain permissions for newly proposed customer projects. Some of these meetings occur after hours and weekends. Some of the meetings are out of State and require extended travel times. Operate a bucket truck and able to work aloft to access splice cases and lashing fiber cable. Install a lashing machine on the strand and lash small sections of fiber to secure the supporting strand. Access confined space locations to audit conduits and place cable or remove splice cases and place in the vehicle to have work completed. These spaces will require a pump to evacuate water and the person to work in a wet and dark environment. Shall possess knowledge of fiber optic filters and CDWM filter splicing and testing. The technician must also be able to operate an EXFO OTDR and 400 gig test set and work with Lightpath or contracted resources to complete fiber and provisioning testing for circuits on an as needed basis. Individuals must be willing to learn and attend continuing ed classes for OTDR, electronic equipment and fiber splicing. The technician must be able to operate a fusion splice machine (single and mass) for fiber optic cables. This work requires a steady hand and the ability to sit ina single location for extended periods of time. The technician must be able to work onladders both 28-foot extension and step up to 8-foot-high step ladders. The technician will also need to cover on-call shifts to support the Lightpath fiber Network. This at times may require working in adverse conditions and on holidays. Requirements Must have excellent follow-through skills, be detail-oriented and be able to develop and manage accurate data in Project Trackers. Ability to travel for short periods of time. College Degree in Engineering, Communications or related field experience preferred. 5+ years' experience in fiber optic construction installation and maintenance. Superb timeline tracking and daily reporting skills on Excel, MS Office, experience with MS VISIO a plus. Excellent customer service skill sets. Excellent communicator who can coordinate multiple moving parts and multiple customer tracking. Ability to use Google Earth. Ability to understand and manage project goals, and deadlines. Pro-Active and organized individual who has excellent follow through skills, comfortable meeting with customers, excellent time management, self-motivated individual. Articulate, organized, and detailed individual who can interact effectively with customers, and other internal employees related to the project. Excellent interpersonal and communications skills. Ability to work at night and off hours. Other duties as assigned. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Physical Requirements and Working Conditions Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during work. May be required to operate vehicle for Company business. Work is performed in an office environment. Must be able to work outside in all types of weather to hang signs and flyers, vehicles, and business. Must be able to carry 75 pounds and work in an aerial lift device. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in Massachusetts. The pay range at the time of posting in the specified locations is $60,000 - $70,000/year. Pay ranges are supplied in compliance with Massachusetts law. Pay is competitive and based on a number of job-related factors, including skills and experience. Some of our featured benefits include medical, dental, vision insurance, yearly bonus program and company matched 401k.

Our customer is looking to add multiple resources to the team to support ongoing and upcoming projects, there is a large project in Manchester NH that needs support. We are looking for techs with experience in the structured cabling. At least 6 months of experience with punch downs, terminations and cable running in commercial buildings is necessary. *Skills* Cabling, Install, Construction, attitude, Cat6, Punchdown, Cable puller, Structured cabling, Cable tech, Telecommunication *Top Skills Details* Cabling,Install,Construction,attitude *Additional Skills & Qualifications* Must be reliable and willing to drive to the sites with own vehicle while on contract *Experience Level* Entry Level *Job Type & Location*This is a Contract to Hire position based out of Methuen, MA. *Pay and Benefits*The pay range for this position is $18.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Methuen,MA. *Application Deadline*This position is anticipated to close on Jan 20, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Sciens Building Solutions is seeking an experienced Fire Service Technician with programming, troubleshooting, and repair capabilities and experience. This position will work closely with our service team, and clients to ensure our critical life safety systems are repaired in an efficient manner to maintain their overall performance. This is a key position for our growing team and requires attention to detail in all aspects of system troubleshooting and repair. Customer and employee interface requires a high degree of effective human relations. Communication skills, both written and verbal, are important elements of the position. WHAT YOU'LL BE DOING (and doing well!) Troubleshooting and repairing Fire and Life Safety systems, including conventional, addressable, voice systems, complex smoke control, and networked solutions. Use a variety of troubleshooting tools to analyze systems and detect fault conditions. Ensure maximum system detection and alarm coverage when effecting repairs. Produce repair reports in accordance with NFPA for customer acceptance and billing information. Programming systems via laptop computers. Ensure Fire Alarm circuit integrity. Assist in managing vehicle inventory and repair tools. Provide support, guidance, and expertise to other technicians. WHAT WE LIKE ABOUT YOU· Two to five years of experience in a repair or systems technician role within the Fire Life and Safety industry. Knowledge of current fire alarm systems, including smoke control, graphic user interfaces, and networked solutions. Demonstratable knowledge of Fire Alarm circuit integrity and how to troubleshoot for circuit opens, shorts, and/or ground conditions. Ability to program and repair fire alarm systems using a laptop computer. Knowledgeable in NFPA 72 code requirements. Intermediate knowledge of Article 760 of NFPA 70 (Electrical Code) for the installation of fire systems and circuiting. Knowledgeable of state, federal, and other regulatory requirements for testing of fire alarm systems. Ability to demonstrate proper operation of equipment and control units to customers and explain how it is to be used, and how to respond to any systems signals. Ability to read fire system design drawings. Demonstrable knowledge of the safe use of standard trade tools. NICET I Certification Ability to train and develop other Service Technicians on equipment, company policies, and procedures. Knowledge of OSHA safety standards and able to obtain OSHA 10 Certifications. Customer-focused; skilled in project and people management. Proficient in issue resolution Excellent organizational, decision-making, and communication skills Ability to work under tight deadlines and with a sense of urgency. Be physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday. Valid driver's license & reliable transportation MA Class D or Journeyman Electrical License WHAT WE'RE BRINGING TO THE TABLE Competitive salary based on qualifications. Paid time off plan and holidays. 401(k) matching. Short term and long-term disability. Medical, dental, and vision plans with options. Life insurance. Company cell phone, laptop, and vehicle. Professional career development opportunities. Tuition Reimbursement

OVERVIEW: The Marine/Service Technician is responsible for the repair and overhaul of boats, machinery and trailers. KEY TASKS: Examine boat and discuss the nature and extent of damage or malfunction with the service advisor or customer. Perform diagnostics and repair of all types of marine engines and transmissions/drives/generators. Perform mechanical repair work such as: remove engine, transom or outdrive disassemble unit and inspect parts for wear overhaul or replace carburetors, blowers, generators, distributors, starters, pumps, electrical and fuel systems rebuild parts such as engine cylinder blocks rewire ignition system, lights and instrument panel replace and adjust taillights install and repair accessories such as radios, heaters, mirrors, and windshield wipers Operate a hydraulic jack or hoist as needed. Advise customers and/or insurance adjusters as to necessary repairs. Complete repair work utilizing service scheduler and SSO's within the established timeframe Ensure all warranty work is completed according to manufacture's and MarineMax guidelines Safely operate MarineMax and customer vessels during diagnostic water testing operations Maintain MarineMax tools in good condition and according to guidelines Other duties as assigned KEY RESULT AREAS: Internal/external customer satisfaction/FANS Timely and accurate completion of work Maintain 100% productivity MarineMax and its subsidiaries uses E-Verify, an Internet-based system, to confirm the eligibility of all newly hired employees to work in the United States. Learn more about E-Verify, including your rights and responsibilities.

Riley Power group, LLC is a full-service maintenance and capital construction services company headquartered in Pinehurst, NC. We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial, power generation, and defense sectors. We are currently hiring a skilled MOV Technician. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! This position could be located anywhere nationwide. It all depends on where the client's needs are located. Essential Function of this position may include but is not limited to: Perform MOV refurbish activities including preventative and corrective maintenance, actuator regrease, electrical equipment removal/installation, valve position limit switch setup on Motor Operator Actuators (Limitorque, Rotork, EIM etc.). Qualification, education, and experience requirements: Must have 3 years' experience in MOV refurbishment. Completion of a Motor operated valve training course and pass MOV TPE. Must have a high school diploma or equivalent. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to; practical and written skills assessments, computer-based-training, medical, psychological, background and substance abuse screening(s).

Join Our Team as a Cable Technician! Are you looking for a rewarding career opportunity? Koscom Cable Inc. is hiring Cable Technicians across the US! Whether you're an experienced pro or just starting out, we want you on our team. Position: Cable Technician Type: 1099 contract Compensation: Weekly pay ranging from $1200-$1700 (experienced techs can earn up to $2000/week) Benefits: Training allowance, weekly paycheck Responsibilities: - Running cables from poles and inside homes (physical fitness required) - Verifying signal levels on cable outlets - Providing TV, Internet, and Phone services for customers - Installing equipment (modems, cable boxes) - Troubleshooting technical issues - Educating customers on our services Requirements: - Own a white VAN or pickup truck (leasing options available) - Valid drivers license - Active Social Security Number - iPhone/iPad for app usage - Conversational English (other languages welcome) - Ability to pass a drug test and background check - Ability to carry heavy objects (like a 28 ft ladder) - No Experience Necessary! We'll provide training to help you succeed. Apply Now! Leave a request and we'll reach out to you. Check out our employees in action: ********************************** ZTrc9afp8 ******************************************* ******************************************* *Applicants must successfully pass a drug test and background check after a conditional offer of employment is made.

Milton CAT is seeking a highly driven person for our Paving Technical Communicator to work in our Maine, New Hampshire and Vermont region. This candidate will work within the Service Organization to support earthmoving equipment product line. Will act as liaison between CAT, Weiler and Milton CAT. Maintain high standards of customer service by providing technical support to technicians, managers, and supervisors. Note: We are recruiting for one open position and have advertised this position in multiple cities within our territory. Responsibilities Technical Support & Communication Assist service departments in ME, NH, and VT with timely and accurate repairs on CAT and Weiler paving equipment. Act as a liaison between Milton CAT and Caterpillar (CAT) to facilitate the flow of technical information. Provide backup coverage for Technical Communicators in other regions. Training & Product Introduction Present New Product Introductions (NPIs) for machines within the specialist group. Conduct training sessions as required to technicians on paving product. Shop and Field Support Help technicians diagnose equipment issues. Maintain ongoing communication with technicians regarding product issues and updates. Maintain communication with Shop and Field Management. Paving Product Focus Serve as the Technical Communicator for paving products in ME, NH, VT. Support growth in parts and service for paving products. Assist existing Product Support Consultants with paving product opportunities. Qualifications To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and ability required. Minimum of 5 years working with Earthmoving equipment in roles such as mechanic, Technical Communicator, or Trainer. Prefer high level of experience with paving industry in general. High level of Product Knowledge and Familiarity with the CAT product line. Strong oral and written communication skills, along with excellent -interpersonal skills. Ability to communicate effectively across various personnel levels. Strong mechanical knowledge and aptitude. Proficiency with CAT tools such as SIS (Service Information System) and ET (Electronic Technician). High level of Organizational Skills: Capable of managing multiple tasks simultaneously. Must hold a valid driver's license with a clean driving record. This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. Background check and drug screening are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer.

We're looking for a Technical Lead to join our Product Engineering team at our HQ in Kendall Square. This is a fantastic opportunity to work with an amazing team and make a real and immediate impact for our members and users. What you'll be doing: Build and test features for a rapidly growing consumer-facing application. Take a lead role in steering architecture to scale technology and process to a high scale and quality. Work closely with stakeholders in various internal groups to help balance delivery speed and quality. Mentor and train junior developers to maximize team velocity. About you and your skills: Customer focused outlook on software design. 5+ years building out maintainable applications with modern programming languages such as Java and Javascript Experience building solutions for AWS (or other cloud services) Experience working with distributed systems (microservices) Experience with containers and container orchestration systems a plus! Benefits: We pay 100% of the cost of both your medical and dental premiums directly to the insurance companies Establish an HSA to cover any out-of-pocket expenses you may incur that are not covered by the insurance Employee parking/MBTA costs Host lots of fun all-company events Fully stocked kitchen

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Role:Technology Lead - Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava Duration: Full TIme Location: Cranston, RI Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education • At least 4 years of experience with Information Technology Preferred • At least 4 years of Java development experience, ideally in a team lead role • Knowledge of architectural design patterns, performance tuning and functional designs. • At least 4 years of experience in Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava • Ability to develop functional, technical and user interface designs for an application that meets the defined requirements (business, system performance and standards) • At least 4 years of experience in specific coding concepts and/or languages, especially around modern application architectures. • At least 2 years experience with web applications that use responsive design to better support mobile browsers. • AT least 2 years of experience in highly-secured online environments that use n-tier designs and extensive firewalling to enhance security. • At least 4 years experience interfacing with back-end applications using MQ, SOAP, RESTful services, and JSON. • At least 2 years of experience in multi data center physical implementation models for scalability and resilience. • Experience with Spring Boot, Netflix OSS, HATEOAS, Gradle/Maven is a plus. ReST/Resource Oriented Design, Wiremock, JUnit/Mockito/Assert4J, AMQP/JMS/MQ, Functional Reactive/ Lambdas/Streams, Agile/Jira,Jenkins/Cobertura/PMD/FindBugs are good to have. • Experience and desire to work in a Global delivery environment • Communication and Analytical skills Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education Additional Information All your information will be kept confidential according to EEO guidelines.

Make your mark at the world's largest HVAC company The HVAC Controls Technician II position for Building Automation Systems (BAS) is critical to our success in ensuring our customers receive top-notch service as it relates to the installation, programming, and service of commercial digital control systems while maintaining quality and profitability. The position will be responsible for providing technician support for BAS, maintenance agreements, system upgrades, and controls related service requests. Location: Boston, MA What you will do: Provide responsive and professional customer service with the goal of building and maintaining long-term customer relationships Identify, analyze, diagnose, and troubleshoot direct digital control systems Perform preventative maintenance, commissioning, and replacement modifications as needed or requested by customers Maintain building automation systems by inspecting trend logs, reports, schedules, applications, hardware, and programming Provide controls technical support to HVAC technicians Create and/or implement programming and graphics for new installations and retrofit projects Commission controls installations and verify that control sequences meet scope, design, or specifications Provide training and follow-ups for Customers and operations personnel Complete work orders and review with customers for accuracy Continually look for ways to improve our processes and ability to serve our customers effectively What's in it for you: Factory Certified Training, Online Training Courses, or other professional on the job training in the HVAC Industry The opportunity to work on all types of commercial equipment and cutting-edge technologies such as Intelligent Equipment, Magnetic Bearing Technology, and VRF Technology Daikin Applied provides technicians with company vehicle, laptops, mobile devices, and other technologies The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best The opportunity to work for a leading innovator in HVAC and make a difference in environmental initiatives to create a more sustainable world for all Minimum Qualifications: High School Diploma or GED. 3+ years of related experience with increasing responsibility. Valid driver's license with acceptable driving record. Ability to lift 50lbs with or without an accommodation. Required license(s) and/or training card as required by local law district. Preferred Qualifications: Experience in BAS, HVAC, or related industry. Proficiency with test instruments and calibration tools. Competency in operation of engineering/commissioning tools, DDC controllers and field devices, BACnet protocol fundamentals. Competency in the operation of HVAC equipment and controls. Ability to understand written sequences of operation. Ability to read low voltage wiring diagrams and controls flow diagrams. Niagara AX and/or Niagara 4 certification. Experience with any common integration protocols such as: BACnet MST / IP, LON, Modbus TCP / RTU, Ethernet OIP, MQTT, or SQL. Strong computer skills, including computer networking fundamentals. Good verbal and written communication skills. Customer-focused, results-oriented professional, and strong team player. Motivated self-starter that demonstrates initiative. Ability to manage multiple priorities and stay organized. Current first aid / CPR card. The typical hourly pay rate for this position ranges from $37.90 - $58.70 in MA. The range displayed represents the pay range for all positions in the job grade which this position falls. Individual base pay will depend on a wide range of factors including your skills, qualifications, experience, and location. If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

Benefits: Bonus based on performance Competitive salary Signing bonus Company parties Opportunity for advancement $250 sign-on bonus and after 90-day probationary period another $750 We provide: Year-round stable, steady work Regular work hours Flexible scheduling Cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Attleboro is a Home Ally Service company dedicated to providing premium Construction and handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Massachusetts CSL (Unrestricted Construction Supervisor License) (Not required but perferred) Managing 1 to 3 person teams Purchasing job materials Job estimating Deck building Door Installations Bathroom upgrades / remodel Quoting jobs / projects Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior NOTE: Requires your own Truck/Van and tools. Company owned Vans maybe available in the future if availble. What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Also, large construction projects requiring permits such as deck,. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office."

Benefits: Bonus based on performance Competitive salary Signing bonus Company parties Opportunity for advancement $250 sign-on bonus and after 90-day probationary period another $750 We provide: Year-round stable, steady work Regular work hours Flexible scheduling Cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Attleboro is a Home Ally Service company dedicated to providing premium Construction and handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Massachusetts CSL (Unrestricted Construction Supervisor License) (Not required but perferred) Managing 1 to 3 person teams Purchasing job materials Job estimating Deck building Door Installations Bathroom upgrades / remodel Quoting jobs / projects Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior NOTE: Requires your own Truck/Van and tools. Company owned Vans maybe available in the future if availble. What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Also, large construction projects requiring permits such as deck,. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $35.00 - $50.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Job DescriptionCompensation & Equipment Support: Project onboarding support provided Training sessions available to support work quality Paid per hour/project as a 1099 contractor Performance-based project completion bonuses available Flexible scheduling per project. Hours determined by project scope and timing Tools, uniforms, vehicle, and equipment provided for project completion Availability: Project-based with growing availability Responsibilities: Support the installation of custom storage systems Deliver high-quality workmanship with strong attention to detail and communication Maintain a safe, organized, and clean work environment Coordinate project schedules with clients and other contributors Adhere to agreed work specifications and safety guidelines Job Requirements: Some knowledge of common carpentry tools and installation equipment Ability to lift and carry heavy materials and perform physical tasks Reliable, punctual, and committed to quality work Valid driver's license and a clean driving record Qualifications: High school diploma or equivalent Carpentry, cabinetry, or technical/vocational training preferred Experience assembling or installing furniture preferred Background in custom, trim, or cabinet carpentry is a plus How we work: We collaborate with independent professionals who take pride in delivering high-quality installations. Each project is approached with clear expectations, careful planning, and hands-on execution. While contributors work independently on-site, communication with project leads ensures alignment on schedule, materials, and client needs. Safety, organization, and attention to detail are essential. We view every project as an opportunity to build skills, refine installation techniques, and contribute to consistent, professional results. We respond to all candidates within 24 hours and complete hiring in 7 days. This franchise is independently owned and operated. All applications and hiring decisions are handled directly by the franchisee.

Job Description About the Role: The Lead Service Technician plays a critical role in ensuring the efficient operation and maintenance of equipment and systems within the organization. This position is responsible for leading a team of service technicians, providing technical expertise, and ensuring that all service tasks are completed to the highest standards. The Lead Service Tech will coordinate service schedules, troubleshoot complex issues, and implement solutions that minimize downtime and enhance system performance. This role requires a proactive approach to identifying potential problems and mentoring junior technicians to develop their skills. Ultimately, the Lead Service Technician ensures customer satisfaction through timely, effective service delivery and continuous improvement of service processes. Minimum Qualifications: High school diploma or equivalent; technical certification or associate degree in a relevant field preferred. Minimum of 5 years of experience in a service technician role with demonstrated technical proficiency. Proven experience leading or supervising a team in a technical or service environment. Strong knowledge of mechanical, electrical, and electronic systems relevant to the industry. Valid driver's license and ability to travel to customer sites as required. Preferred Qualifications: Certification in specialized equipment or systems relevant to the company's service offerings. Experience with computerized maintenance management systems (CMMS) or similar software. Advanced troubleshooting and diagnostic skills using modern tools and technology. Formal leadership or management training. Experience working in a customer-facing role with strong communication skills. Responsibilities: Lead and supervise a team of service technicians in daily operations and service calls. Diagnose, troubleshoot, and repair complex mechanical, electrical, or electronic equipment issues. Develop and implement preventive maintenance plans to reduce equipment failures and downtime. Coordinate service schedules and manage resources to meet customer and organizational needs. Provide technical training and mentorship to junior technicians to enhance team capabilities. Maintain accurate service records, reports, and documentation in compliance with company policies. Collaborate with other departments to improve service processes and customer satisfaction. Ensure compliance with safety regulations and company standards during all service activities. Skills: The Lead Service Technician utilizes strong technical skills daily to diagnose and resolve complex equipment issues efficiently, ensuring minimal disruption to operations. Leadership and communication skills are essential for managing the service team, coordinating schedules, and providing clear guidance and training to junior technicians. Problem-solving abilities are applied continuously to develop preventive maintenance strategies and improve service processes. Organizational skills are critical for maintaining accurate records and managing multiple service requests simultaneously. Additionally, proficiency with diagnostic tools and software enhances the technician's ability to deliver timely and effective solutions, contributing to overall customer satisfaction.