Installation technician jobs in Chapel Hill, NC

The Cable Technician is responsible for installing, maintaining, and troubleshooting structured cabling systems to support voice, data, video, and network communications. This role ensures all cabling infrastructure is installed to industry standards, project specifications, and customer requirements while maintaining safety and quality at all times. Key Responsibilities Installation & Cabling Work Install, terminate, and test copper (Cat5e, Cat6, Cat6A) and fiber optic cabling systems. Pull, label, route, and dress cables in commercial, industrial, and data center environments. Install cable trays, J-hooks, ladder racks, racks, patch panels, and related infrastructure hardware. Perform fiber splicing, connector installation, and end-to-end certification. Install network equipment including switches, wireless access points, and telecom room hardware as directed. Testing & Troubleshooting Conduct continuity, performance, and certification testing using Fluke or similar testers. Diagnose and resolve cable faults, signal loss, and connection issues. Perform repairs and upgrades to existing cabling systems with minimal downtime. Documentation & Compliance Complete detailed daily job reports, cable logs, labeling documentation, and test results. Ensure all cabling meets BICSI, NEC, and manufacturer standards. Qualifications 1-3+ years of structured cabling or low-voltage installation experience preferred. Knowledge of copper and fiber standards, cabling best practices, and industry tools. Ability to read and interpret blueprints, floor plans, and cable layouts. Experience with cable testing equipment (Fluke DSX, OTDR, light meters). Familiarity with LOTO, ladder safety, PPE, confined spaces, and general construction safety. Strong troubleshooting and problem-solving skills. Ability to lift 50+ lbs, work on ladders, and work in overhead or crawl spaces. Valid driver's license and reliable transportation. Preferred Certifications BICSI Installer 1 or Installer 2 (Copper or Fiber) OSHA 10 or OSHA 30 Manufacturer-specific cabling certifications (e.g., Commscope, Panduit)

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Extensive travel required. (Local, National). Applicants can live anywhere within the Continental U.S Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment. · Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Johnson Service Group, a nationally recognized staffing firm, is targeting a Field Service Engineer- Gas Insulated Switchgear (GIS) for our widely diversified, critical equipment manufacturing client. The incumbent will be leading the installation, commissioning, and servicing of GIS systems across North America. This role places you at the center of high-impact projects, working with voltages from 69kV to 800kV. Responsibilities Lead technical field assignments and make critical decisions Direct the work of field teams and subcontractors Manage productivity to ensure timely project completion Ensure adherence to drawings, specifications, and quality standards Promote safe practices and meet health, safety, and environmental requirements Supervise the installation and commissioning of high-voltage GIS substations Conduct frequent inspections and document pertinent information Plan, schedule, and lead on-site weekly progress meetings Perform and document field testing on equipment Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines Qualifications: College or university diploma/degree in electrical or mechanical engineering Minimum of 10 years of experience in service or construction management with high-voltage equipment Hands-on experience in substation construction, servicing, and commissioning Strong mechanical and electrical aptitudes Proven leadership experience in coordinating and leading crews Proficiency in MS Word, Excel, Outlook, SharePoint, and MS Project Physical ability to work on-site, including climbing and lifting Candidate must already have work authorization that would permit them to work in the United States Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Role: Maintenance Engineering Technician (PLC Programming) Industrial Maintenance experience in a manufacturing environment or equipment installation and debugging experience Experience with Electrical and/or mechanical systems in an industrial manufacturing environment Technical experience with PLCs in programming, including read, write and modify logic Technical experience with Servo Motion Controllers Technical experience with relay logic including wiring and troubleshooting Technical experience with Robotics including programming and troubleshooting. Experience with Hydraulic or Pneumatic troubleshooting and schematic reading Availability to work overtime, holidays, weekends, and shutdowns Ability for business travel, both domestic and international - up to 30%. Added bonus if you have: Technical associate degree or higher or equivalent experience Experience in Pre-Production set up Experience with Production Processes including Standardized Work (STW) and Job Instruction Sheets (JIS) Experience gathering and analyzing quality data from multiple sources New plant or facility startup experience Experience with high volume production in a clean room environment

Type: Full-time permanent position with available over-time. Benefits: Truck + gas card + PPE + Tools + 401k match + health & dental We are seeking a skilled and motivated Solar Technician to join one of our reputable solar clients, who develop, own, and maintain their own sites. As a Solar Technician, you will be responsible for the operations and maintenance of solar panel systems. This is an excellent opportunity to contribute to the growth of renewable energy and make a positive impact on the environment. Responsibilities Perform routine maintenance and inspections on solar panel systems, Diagnose and repair, troubleshoot any issues or malfunctions in the system Collaborate with team members to ensure projects are completed efficiently Follow safety protocols and adhere to industry regulations Keep accurate records of work performed Experience: 1-2+ years of experience with O&M works on Utility-scale solar farms or huge C&I projects (1MW+) Experience with AC, DC, and PV Systems Experienced with locating and troubleshooting ground faults IV Curve tracing and Megging experience (One of them - ideally both) OSHA certifications Valid drivers license Benefits: 401k match Bonus (10%) Dental, Medical, Vision benefits Truck and gas card Certifications available for progression If you are a dedicated individual with a passion for renewable energy, we encourage you to apply for this position. Join our team and be part of the clean energy revolution! Feel free to apply to the advert with your CV or reach out to me via **************************

Rangam is seeking candidates for a Direct Hire role as a Bioprocess Technician III with our client, one of the world's largest pharmaceutical companies. Seeking candidates in Sanford, NC or willing to relocate. Use Your Power for Purpose Our breakthroughs would not reach the hands of patients without our dedicated pharmaceutical manufacturing team. We rely on agile members who understand the critical impact of their role in client's mission. Patients need colleagues like you who take pride in their work and continuously strive to improve outcomes. Your efforts ensure that patients and physicians have timely access to the medicines they need. What You Will Achieve In this role, you will: Take responsibility for individual contributions to achieve team deliverables, working effectively as a team member and coordinating with others. Manage personal time and professional development, being accountable for results. Follow standard procedures to complete tasks of varying scope, sequence, and complexity within the agreed timeframe. Identify and solve moderately routine problems. Complete assignments with moderate supervision using established procedures, referring deviations from standard procedures to the supervisor. Ensure work is reviewed for accuracy, quality, and adherence to standards. Be responsible for the production of drug substances or active biological ingredients (ABI), assisting in various activities and functions within a manufacturing facility, and ensuring equipment functionality. Support technical operations, maintain housekeeping standards, keep training status current, and assist in the implementation of new technology for process execution and analysis. Here Is What You Need (Minimum Requirements) High School Diploma or GED with 2+ years of relevant experience Strong verbal and written communication skills Proficiency in using standard manufacturing equipment and tools Basic understanding of Good Manufacturing Practices (GMP) Ability to follow detailed instructions and standard operating procedures Strong problem-solving skills in a structured environment Capability to work effectively in a team setting Basic computer skills, including familiarity with data entry and reporting systems Bonus Points If You Have (Preferred Requirements) Experience in a pharmaceutical or biotechnology manufacturing environment Knowledge of regulatory requirements and quality systems Strong organizational skills and attention to detail Ability to adapt to changing priorities and manage multiple tasks Demonstrated ability to take initiative and drive continuous improvement Strong analytical skills and the ability to interpret technical data Physical / Mental requirements The physical requirements include Lifting, sitting, standing, walking, bending, ability to perform mathematical calculations and ability to perform complex data analysis. Does not include requirements that are generally applicable to most or all jobs at client's, such as “ability to communicate,” “ability to work on teams”, “office job involving use of computer”, etc. Non-Standard work schedule, travel or environment requirements This is a M-F position and will be a rotating monthly. The colleague will work one month on 1st shift 7am-3:30pm, then rotate one month on 2nd shift 3pm-11:30pm, then rotate one month on 3rd shift 11pm-7:30am. Scheduling is subject to change. Other job details Last day to apply: December 16th, 2025 Work Location Assignment: On Premise The salary for this position ranges from $22.94 to $38.24 per hour. In addition, this position offers eligibility for overtime, weekend, holiday and other pay premiums depending on the work schedule and the Company's policies. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with client's Matching Contributions and an additional client's Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at client's Candidate Site - U.S. Benefits | (uscandidates.my**benefits.com). Compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided applies only to the United States - North Carolina - Sanford location. Relocation assistance may be available based on business needs and/or eligibility. To find out more about Rangam, and this role, click the apply button. Satnam Singh SA Technical Recruiter | Rangam Consultants, Inc M: ************** E: *****************| W: **************

Staffworks Group is hiring Refrigeration Technicians. The Refrigeration Technician is responsible for installing, maintaining, and repairing commercial and industrial refrigeration systems. This role ensures that cooling systems operate efficiently, safely, and in compliance with industry standards and regulations. Key Responsibilities: Install, service, and repair commercial and industrial refrigeration systems, including walk-in coolers, freezers, chillers, ice machines, and HVAC equipment. Diagnose mechanical and electrical issues using specialized tools and equipment. Perform routine maintenance, including cleaning coils, checking refrigerant levels, and inspecting electrical components. Recharge systems with proper refrigerants in accordance with EPA regulations. Read and interpret blueprints, schematics, and technical manuals. Replace defective parts such as compressors, motors, valves, and controls. Calibrate thermostats and system controls to ensure proper operation. Maintain accurate service records, logs, and documentation for all work performed. Follow all safety procedures and environmental regulations related to refrigerant handling and disposal. Communicate effectively with clients, supervisors, and team members regarding project updates and service recommendations. Qualifications: High school diploma or GED required; technical or trade school certification preferred. EPA Section 608 Certification required. 3+ years of experience in refrigeration service, maintenance, or installation preferred. Strong knowledge of mechanical, electrical, and electronic control systems. Ability to read blueprints and technical diagrams. Valid driver's license and clean driving record. Strong troubleshooting and problem-solving skills. Ability to work independently or as part of a team. Working Conditions: Work performed indoors and outdoors in varying temperatures. May involve climbing, lifting heavy equipment, and working in confined spaces. On-call or after-hours availability may be required. #talroogreer

Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies. I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program. Hi, I hope you are doing good. I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further Role: Technology Lead - Service Now Duration: Full TIme / Permanent Location: Cary, NC Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 5 years of experience in configuration and maintenance of ITSM tools. • At least 4 years experience configuring and maintaining Service Now. • Good knowledge of Java/J2EE technology and framework. • Domain knowledge of Insurance • At least 5 years of experience in application maintenance and support. • Analyze and resolve issues to ensure SLA adherence and customer satisfaction. • Perform ticket triage, prioritization, independent testing, change management processes, implementation activities and post implementation support. • Support client interfacing activities and create the relevant reports in a timely manner. • Excellent written & verbal communication • Strong Analytical skills • Experience working with offshore/onshore resources • Ability to work in team environment and client interfacing skills. • Experience and desire to work in a Global delivery environment. • Ability to work in team in diverse/ multiple stakeholder environment • Experience and desire to work in a Global delivery environment The job entails sitting as well as working at a computer for extended periods of time. Should be able to communicate by telephone, email or face to face. Travel may be required as per the job requirements. Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Lead Service Technician - Engineered Systems We're looking for a reliable, highly skilled Lead Service Technician to join our Raleigh/Clayton Service Team. This role calls for a critical thinker and hands-on leader with strong industrial electrical and mechanical skills who communicates clearly, takes ownership, and can guide a team of technicians, solve complex problems, and ensure our customers' crane and hoist systems operate safely and efficiently. Responsibilities Perform regular maintenance and repair on crane and hoist systems to ensure optimal performance. Lead, train, and support a team of Technicians in diagnosing system issues, troubleshooting electrical and mechanical problems, and completing repairs efficiently. Conduct inspections, identify potential issues, and implement solutions to prevent system failures. Ensure all work meets technical specifications, safety standards, and customer expectations. Maintain accurate maintenance and inspection logs. Communicate effectively with team members, management, and customers to coordinate work and resolve issues. Stay current with industry standards, new technologies, and ESI training programs. Follow all company policies, procedures, and safety regulations. Requirements Proven experience as a Maintenance or Industrial Technician with strong electrical and mechanical skills. Solid understanding of single and 3-phase motors, low and high voltage systems, and industrial controls. Ability to read and interpret blueprints, schematics, and technical manuals. Strong troubleshooting and problem-solving ability. Effective leadership skills - able to coach, guide, and set expectations for others. Dependable, self-motivated, and accountable for both quality and safety. Physical ability to lift/push/pull up to 50 lbs and work at heights when required. Valid driver's license with a clean driving record. Why Join ESI? Collaborative and Positive Work Environment Success of a company that has been in business over 55 years Purpose-Driven Culture Great Benefit Packages: Health, Dental, Vision, Life, Disability, 401(k) with Company Match, Paid Time Off Employee Assistance Program Employee Benevolence Program #hc204968

Fiber Splicer / Field Operations Technician FULL-TIME | NATIONWIDE TRAVEL | MUST BE WILLING TO TRAVEL 4 WEEKS AT A TIME Company: E-3 Technical Solutions OUR VISION At E-3 Technical Solutions, we are committed to creating opportunities for our team to thrive and grow in the telecommunications industry. Our reputation is built on reliability, technical excellence, and a commitment to doing the job right the first time. We believe that when we take care of our people and our customers, success follows. JOB SUMMARY We are currently seeking a motivated and experienced Fiber Splicer / Field Operations Technician to join our nationwide team. This full-time, travel-based role is critical to the deployment and maintenance of high-performance fiber optic networks across the country. The ideal candidate will have practical, in-the-field experience with fiber optic splicing, testing, and troubleshooting, and be comfortable working independently in dynamic environments. KEY RESPONSIBILITIES Install, splice, and test single-mode and multi-mode fiber optic cables and connectors Perform OTDR, power meter, and light source testing for end-to-end validation Interpret fiber optic schematics, splice plans, and network diagrams Conduct troubleshooting and resolve technical issues efficiently in the field Complete preventative maintenance and report potential infrastructure issues Maintain thorough and accurate documentation of all work performed Collaborate with engineering, construction, and project teams to support deployments Manage and maintain inventory of fiber optic tools, test gear, and consumables Follow all safety protocols and adhere to company and industry quality standards REQUIREMENTS High school diploma or equivalent; Associate's or Bachelor's degree in a technical field preferred Proven field experience with fiber optic installation, splicing, and testing Strong understanding of OTDRs, power meters, fusion splicers, and related equipment Excellent problem-solving skills and attention to detail Effective communication skills (both verbal and written) Valid driver's license and reliable transportation Ability to work independently with minimal supervision Flexible schedule - must be able to work evenings, weekends, or on-call as needed Comfortable with extensive nationwide travel (3-4 weeks at a time) WHAT WE OFFER Competitive pay Paid travel and per diem Opportunity to grow with a rapidly expanding telecom company A supportive team that values quality, safety, and professionalism HOW TO APPLY If you're passionate about fiber optics, thrive in the field, and are ready to travel and grow with a company that values your work, we want to hear from you. Please submit your resume and a brief cover letter to be considered.

EchoStar is reimagining the future of connectivity. Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products. Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV. Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world-class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience has paid off, as DISH is a six-time J.D. Power award winner for being #1 in Customer Satisfaction. Job Duties and Responsibilities What You'll Do: You'll visit customers' homes, solve problems, and introduce them to smart home tech. Install and service DISH equipment and smart home products in customers' homes Teach customers how to use their tech and offer additional services when helpful Keep a clean work area and maintain a professional attitude while working independently but staying connected with the team What's in it for You: Career Growth: Start here and grow fast! Many of our leaders began in this role, with opportunities to move into different departments for new challenges Pay Increases: Automatic promotion after 6 months with a $1/hour raise. Additional promotions with 5-10% pay increases based on performance Bonus Potential: Earn up to $6,400 your first year, and up to $9,100 annually after. High performers also receive AwardPerqs-redeemable for travel, electronics, and more Comprehensive Benefits: Paid training, time off, Medical, Dental, Vision, Life Insurance packages, HSA, 401(K) with company match, Employee Stock Purchasing Program and Tuition Reimbursement Exclusive Perks: Complimentary DISH TV ($114.99/month), discounts on Sling TV ($5/month), and Boost Mobile plans (starting at $15/month), company-provided van, tools, and uniforms Paid Training You'll Get: Clear, step-by-step guidance for installations and service Smart home tech knowledge to support and educate customers Best practices created by our most experienced techs Skills, Experience and Requirements What You'll Need: Valid Driver's License: Clean record required Schedule Flexibility: Willingness to travel as needed; flexible to work shifts that might include evenings, weekends, or holidays Physical Ability: Climb ladders (up to 40 ft) Lift up to 70 lbs Must meet and maintain 335 lb weight limit Customer Focus: Build trust and create a great experience Problem-Solving: Tackle a variety of challenges on the spot Determination: Work in tight spaces and all kinds of weather Adaptability: Handle changes and unexpected tasks with ease Benefits: From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential. The posting will be active for a minimum of 3 days. The active posting will continue to extend by 3 days until the position is filled. We pride ourselves on developing and promoting talent as an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EchoStar will accommodate the sincerely held religious beliefs of employees if such accommodations are not undue hardships and are otherwise within the bounds of applicable law. All qualified applicants with arrest or conviction records will be considered for employment in accordance with local, state, and federal law. You may redact any information that identifies age, date of birth, or dates of school/graduation from your application documents before submission and throughout our application process. EchoStar will provide reasonable accommodation to otherwise qualified job applicants and employees with known physical or mental disabilities, unless doing so poses an undue hardship on the Company, poses a direct threat of substantial harm to others, or is otherwise not required by law. EchoStar has a more detailed Accommodation Policy that applies to employees. EchoStar endeavors to make echostar.com and jobs.echostar.com accessible to users. Please contact *************** if you would like to discuss the accessibility of our website or need assistance completing the application process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications. Click the links to access the following statements: EEO Policy Statement, Pay Transparency, EEOC Know Your Rights (English/Spanish) Salary Ranges Compensation: $21.25/Hour

Full-time Description The Fiber Splicer is responsible for the installation of new cable lines, both underground and on utility poles, and performs maintenance on existing cables, including evaluation tests and repair. Qualifications Ability to meet background requirements and pass a drug screen. Knowledge of telecommunications/CATV industry, preferred. Ability to read, write, speak and understand English. Ability to work independently. Ability to communicate effectively within all levels in the organization. Ability to handle multiple projects and tasks and meet deadlines. Ability to prioritize and organize effectively. Ability to effectively present information to management. Ability to make decisions and solve problems while working under pressure. Ability to show judgment and initiative and to accomplish job duties. Ability to think strategically and anticipate future trends, needs and expectations. An energetic, forward-thinking and creative individual with high ethical standards and an appropriate professional image. Good verbal communications and writing skills. Major Duties and Responsibilities Ability to meet background requirements. Ability to read, write, speak and understand English. Ability to communicate effectively within all levels in the organization. Ability to handle multiple projects and tasks and meet deadlines. Ability to make decisions and work collaboratively with others to solve problems. Ability to prioritize and organize effectively. Ability to effectively present information to management. Ability to show judgment and initiative and to accomplish job duties. Ability to think strategically and anticipate future trends, needs and expectations. An energetic, forward-thinking and creative individual with high ethical standards and an appropriate professional image. Good verbal communications and writing skills. Tasks Required by a Fiber Splicer: Utilize Fusion Splicer to splice Loose Tube & Ribbon fiber cable. Prep/Splice single-mode (SM) and multi-mode (MM) optical fiber cable. Troubleshooting of fiber utilizing an OTDR. Proper record keeping and be able to review cable records as necessary. Maintain equipment and vehicle to a high standard. Work indoors and outdoors as needed. Be able to iterate to the project/construction managers detailed accounts of field activity, both verbal and written. Coordinate with tech ops managers to verify and perform work as directed. Night work as needed for things like node splits. Knowledge required by a Fiber Splicer: Knowledge of transmission and CATV telecommunications systems. Public Safety - Knowledge of keeping work area safe to the public. Knowledge of optical splicing equipment like a cleaver, splicer and bucket truck Working Conditions: Field environment - exposure to extreme heat or cold is likely. On-call rotation. Disclaimer Statement This is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with this position. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned. Salary Description 23-27

Job Description GAC Enterprises, LLC, a fast-growing telecommunications construction company, is seeking a Fiber Splicer to join our team. As a Splicer, you will be responsible for splicing fiber optic cables and performing maintenance, troubleshooting, and repair of fiber optic networks. This position requires excellent attention to detail, strong communication skills, and the ability to work effectively both independently and as part of a team. Responsibilities Splice and terminate fiber optic cables according to industry standards Complete and maintain accurate splice records, as-built maps, and other related documentation Troubleshoot problems with fiber networks and find effective solutions Perform fiber optic testing using equipment such as OTDR, power meters, and fusion splicers Ensure all work is completed within safety guidelines and company standards Maintain and care for all assigned equipment Train, mentor, and provide leadership to employees of an assigned area, or project. Be available for on call dispatching for maintenance work. Other duties as assigned by leadership. Requirements High school diploma or equivalent At least 2 years of experience in fiber optic splicing and network maintenance Experience using equipment such as fusion splicers, OTDRs, and power meters Splicing certified Knowledge of industry standards and regulations Excellent attention to detail Strong communication and interpersonal skills Ability to work independently and as part of a team Willingness to work overtime and travel if needed Benefits Health Care Plan (Medical, Dental & Vision) Life Insurance (Basic, Voluntary & AD&D) Short-Term & Long-Term Disability Paid Time Off (Vacation, Sick & Public Holidays) Employee Discount Program

Job Description If you're a skilled and passionate forklift mechanic ready for an exciting new challenge, we have the perfect opportunity for you. At AAA Forklifts, we're seeking a dedicated full-time Lead Mobile Forklift Service Technician to join our team in Raleigh, NC. With a competitive base pay of $32 - $40/hour (based on experience) plus commission. We also offer incredible benefits like a take-home company vehicle, paid tolls and gas, and a $1,000 tool financing program, this is more than just a job - it's an opportunity to grow in your career with a company that values your expertise. But that's not all we offer! You can also enjoy these excellent benefits and perks: Commission structure Health, dental, and vision A 401(k) with a 3.5% match Paid time off (PTO) 6 paid holidays Flexible scheduling As a Lead Mobile Forklift Service Technician, you'll enjoy a consistent, full-time schedule, working Monday through Friday, 7:00 AM to 5:00 PM. This mobile routine offers the perfect balance between your professional and personal life, providing structure while giving you weekends off to recharge. WANT TO KNOW MORE ABOUT US? As the one-stop-shop for everything material-handling related, we offer a wide range of services including repair and maintenance to buying, trading, and selling! It's not just a job here - it's a place where every team member genuinely enjoys coming to work. Our upbeat company culture fosters a supportive environment where we have a good time while understanding the importance of getting the job done right. From day one, we welcome our employees with open arms, emphasizing our commitment to their growth and well-being. With an open-door policy and a focus on being employee-centric, we ensure that everyone's voice is heard and respected! DOES THIS SOUND LIKE YOU? Required qualifications: 5+ years of experience as a mechanic Hydraulic or diesel experience Your own tools Clean driving record Preferred qualifications: 10+ years of experience as a mechanic Construction or equipment mechanic experience Ability to read and follow electrical diagrams or schematics Experience in manual troubleshooting (no computers or code readers) READY TO APPLY? Be our new Lead mobile Forklift Service Technician! Getting started is quick and easy with our 3-minute, mobile-friendly initial application. We can't wait to hear from you! Must have the ability to pass a background check. Job Posted by ApplicantPro

Morguard is a fully integrated real estate company. We strategically invest in high-quality, well-located, multifamily assets across North America and our onsite teams are critical to our Communities' success. Now hiring an experienced Lead Maintenance Technician to support maintenance operations for our residential community. We're Hiring An HVAC Certified Lead Maintenance Technician to manage the work orders, preventative maintenance, and day to day work load of the onsite team under the direction of our Community Manager. Pay: * The pay rate for this position is $35-$37 per hour. * Are eligible for employer provided benefits as well as added income via quarterly bonuses - up to 5% of the annual salary. * Are eligible for a $100 stipend for on-call duties. Hours: * Full time, Monday through Friday, from 8:00 AM to 5:00 PM with an hour off for lunch. In this role, you will be required to participate in the On-Call Rotation. * Take turns responding to On-Call Emergencies, one-week rotation * Each On-Call Rotation earns an added On-Call Stipend - paid directly to you even if you're not called to the property We're looking for you To help maintain the highest standards for our apartment community. You'll also be responsible for routine maintenance and called to assist with any capital improvement projects onsite. We need your strong work ethic, customer service for our residents, and a good foundation in general appliance repair, painting, plumbing, and ac diagnostics and repair. Some of your responsibilities include: * Being thorough and courteous; we need you to accurately assess the root cause of each work order that comes in and do your best to close it out and improve our residents' homes * Walk the property each day; know your grounds and your buildings and clear away any trash or debris that you find. * Manage the inventory of vacant apartments; assist with the turn-around process or schedule any required contractors as needed. Inspect all vacant units before the move in to maintain quality * Respond to assigned work orders or general maintenance in a timely manner and always communicate with your Maintenance Supervisor or Property Manager as things move forward or take longer to complete than anticipated * Work with the Regional Maintenance Supervisor on any special projects or property wide routine maintenance as necessary Above all, you will be responsible for staying in sync with the company's and the community's operating and safety policies and procedures and for adhering to federal, state and local laws pertaining to the operation of the community and Fair Housing. Qualifications Experience & strengths you'll need: * HVAC Type I and Type II/EPA Universal Certification; a CPO certification is highly preferred but not required. * Valid Driver's License & ability to respond to after hours or weekend emergencies * Well versed with troubleshooting major appliances, water heaters, boilers, and AC units. * Direct previous experience on a garden-style apartment community * A dedication to company goals and values and a commitment to the success of each associate as a member of the team * Good communicator and listener with strong customer service skills * General knowledge or direct experience of plumbing, drywall repair, painting, carpentry, pressure cleaning, or minor electric troubleshooting and repair * Possess and continually improve the technical skills necessary to perform assigned maintenance This position makes use of onsite golf carts for purposes of property tours and inspections. The identified candidate is required to provide proof of a valid Driver's License in good standing for consideration of hire. Additional Information Why you should join Morguard At Morguard, our employees are our greatest investment. We make people our priority and strive to create a culture of respect, health and safety, and equal opportunity to support employees to meet their goals. When you join Morguard, you join a strong and committed team and will have access to: * Employer Provided Medical Insurance Options * Excellent culture that supports a work-life balance with time off for Summer Hours, Vacation, Personal, Sick Leave, and Paid Holidays * Education Reimbursement Program * Dollar for dollar matching 401k Savings Plan with immediate vesting * Opportunity to live onsite within portfolio with our Employee Discount All job offers are subject to a pre-employment drug test and criminal/credit background check. * Morguard is an equal opportunity employer +This is intended to describe the nature and level of work being performed by individuals assigned to this position. It is not an exhaustive list of all responsibilities required of the job. Job descriptions may also be rewritten periodically to reflect any changes in the position's duties. Morguard is an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Morguard participates in the E-Verify program to confirm eligibility to work in the United States. PRIVACY

Morguard is a fully integrated real estate company. We strategically invest in high-quality, well-located, multifamily assets across North America and our onsite teams are critical to our Communities' success. Now hiring an experienced Lead Maintenance Technician to support maintenance operations for our residential community. We're Hiring An HVAC Certified Lead Maintenance Technician to manage the work orders, preventative maintenance, and day to day work load of the onsite team under the direction of our Community Manager. Pay: The pay rate for this position is $35-$37 per hour. Are eligible for employer provided benefits as well as added income via quarterly bonuses - up to 5% of the annual salary. Are eligible for a $100 stipend for on-call duties. Hours: Full time, Monday through Friday, from 8:00 AM to 5:00 PM with an hour off for lunch. In this role, you will be required to participate in the On-Call Rotation. Take turns responding to On-Call Emergencies, one-week rotation Each On-Call Rotation earns an added On-Call Stipend - paid directly to you even if you're not called to the property We're looking for you To help maintain the highest standards for our apartment community. You'll also be responsible for routine maintenance and called to assist with any capital improvement projects onsite. We need your strong work ethic, customer service for our residents, and a good foundation in general appliance repair, painting, plumbing, and ac diagnostics and repair. Some of your responsibilities include: Being thorough and courteous; we need you to accurately assess the root cause of each work order that comes in and do your best to close it out and improve our residents' homes Walk the property each day; know your grounds and your buildings and clear away any trash or debris that you find. Manage the inventory of vacant apartments; assist with the turn-around process or schedule any required contractors as needed. Inspect all vacant units before the move in to maintain quality Respond to assigned work orders or general maintenance in a timely manner and always communicate with your Maintenance Supervisor or Property Manager as things move forward or take longer to complete than anticipated Work with the Regional Maintenance Supervisor on any special projects or property wide routine maintenance as necessary Above all, you will be responsible for staying in sync with the company's and the community's operating and safety policies and procedures and for adhering to federal, state and local laws pertaining to the operation of the community and Fair Housing. Qualifications Experience & strengths you'll need: HVAC Type I and Type II/EPA Universal Certification; a CPO certification is highly preferred but not required. Valid Driver's License & ability to respond to after hours or weekend emergencies Well versed with troubleshooting major appliances, water heaters, boilers, and AC units. Direct previous experience on a garden-style apartment community A dedication to company goals and values and a commitment to the success of each associate as a member of the team Good communicator and listener with strong customer service skills General knowledge or direct experience of plumbing, drywall repair, painting, carpentry, pressure cleaning, or minor electric troubleshooting and repair Possess and continually improve the technical skills necessary to perform assigned maintenance This position makes use of onsite golf carts for purposes of property tours and inspections. The identified candidate is required to provide proof of a valid Driver's License in good standing for consideration of hire. Additional Information Why you should join Morguard At Morguard, our employees are our greatest investment. We make people our priority and strive to create a culture of respect, health and safety, and equal opportunity to support employees to meet their goals. When you join Morguard, you join a strong and committed team and will have access to: Employer Provided Medical Insurance Options Excellent culture that supports a work-life balance with time off for Summer Hours, Vacation, Personal, Sick Leave, and Paid Holidays Education Reimbursement Program Dollar for dollar matching 401k Savings Plan with immediate vesting Opportunity to live onsite within portfolio with our Employee Discount All job offers are subject to a pre-employment drug test and criminal/credit background check. *Morguard is an equal opportunity employer +This is intended to describe the nature and level of work being performed by individuals assigned to this position. It is not an exhaustive list of all responsibilities required of the job. Job descriptions may also be rewritten periodically to reflect any changes in the position's duties. Morguard is an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Morguard participates in the E-Verify program to confirm eligibility to work in the United States. PRIVACY

Job Description The Fiber Optic Splicer Technician position installs and maintains fiber optic cables as well as provides technical assistance in the design and testing of fiber optics. Responsible for ensuring the integrity and efficiency of our network systems through expertise in splicing techniques and equipment repair. Duties & Responsibilities Splice single mode and ribbon fiber Fusion splice and terminate various types of fiber optic connectors Interpret as-builts and splicing matrices Installation and dressing of fiber optic cabling Perform uni-directional, bi-directional, and power meter testing (OLTS) Troubleshoot fiber optic links and certify fiber optic links Respond to emergency situations to restore service outages Report splicing matrix. Physical Aspects · The physical demands described here are typical of those that must be met by a team-member to successfully perform the essential functions of their job in fiber cable construction. · While performing the duties of this job, team-members are regularly required to talk or listen. The team member is frequently required to stand; walk; use hands to finger, handle, and feel; and reach with hands and arms. · The team member is frequently required to perform rigorous physical labor; sit; climb different types of structures (wood, steel, etc.); or balance; and stoop, kneel crouch or crawl. Team members frequently lift or move up to or in-excess of 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment While performing the duties of this job, team-members may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. Team members are occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment can be loud. Powerline construction work is performed outside and is subject to diverse weather conditions. Competencies Team-Oriented Self-Motivated Customer Service Focused Ethical and Honest Dutifully follows established Safety Rules and Company Policy Required Qualifications Minimum of 2 years of experience in fiber splicing. Experience with single fiber splicing, ribbon splicing, power meter and OTDR. Good understanding of aerial and buried fiber optic plant. Strong understanding and ability to read prints and diagrams associated with splicing. Excellent communication skills (verbal and written) & the ability to interact professionally with customers. Valid Driver's License and acceptable driving record. Valid DOT Medical Card. Ability to work under pressure and in a fast paced and quickly changing environment. Ability & Willingness to travel and work evenings and weekends as needed. This position will require being able to respond to afterhours fiber outages. Ability to work and climb up to 35 feet. Ability to maintain a positive attitude and strong work ethic. Proficient in Microsoft Office Suite (Excel and Word). Excellent organizational skills and strong attention to detail. This is a safety sensitive position, and all applicable policies including drug testing and background checks will apply. Special Position Requirements River City Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability or genetics. In addition to federal law requirements, River City complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Benefits We offer a comprehensive benefits package designed to support the well-being of our employees and their families. Our benefits include medical, dental, and vision coverage, paid time off, company-paid holidays, a 401(k) plan, and numerous voluntary benefits.

Be part of the future! We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are committed to make a difference. Work with an Award-Winning technology that delivers sustainability, safety, and health. What we offer: Competitive Starting Pay On the Job Paid Training Tuition Reimbursement Global Advancement Opportunities with Unlimited Career Path Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: 2-4 years experience with BAS, Honeywell, Siemens , Tridium , Trane, Automated etc... Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. HIRING HOURLY RANGE: $24- $34(Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

About Us With over 18 years of expertise at the forefront of the communications and construction industries, Taylor's Construction, Inc. builds networks that fuel communities and drive innovation. From planning to execution to meeting budgets and deadlines, we excel in the intricate deployment of ariel and underground networks, maximizing efficiency and minimizing disruption. Whether it's high speed-fiber optic installations, complex underground networks, or ensuring reliable connections to every doorstep, Taylor's Construction Inc. delivers. We thrive on challenges, turning ambitious projects into success stories with our expertise in fiber optic technology and meticulous project management. Taylor's Construction Inc., empowers businesses, homes, and entire communities with robust connectivity solutions. About this Role Taylor's Construction is seeking skilled Fiber Splicers to perform splicing, testing, and troubleshooting of fiber optic cables for telecommunications construction projects. This role requires precision, technical expertise, and a strong commitment to safety and quality. What You'll Do Perform fiber optic splicing in various environments. Test and troubleshoot fiber optic networks using OTDRs, light meters, and other diagnostic tools. Interpret splicing diagrams, work orders, and engineered prints. Complete splice documentation, labeling, and testing reports accurately. Ensure compliance with all safety protocols, quality standards, and client specifications. Work with supervisors and project managers to plan daily tasks and meet project deadlines. Provide field support during cutovers, emergency repairs, and restoration activities. What You'll Bring 2+ years of experience in fiber optic splicing or telecommunications construction. Knowledge of OTDRs, fusion splicers, cleavers, and related tools. Ability to read and interpret splicing diagrams, route maps, and engineering prints. Strong troubleshooting skills and attention to detail. Experience with both single-mode and multi-mode fiber, preferred. Willingness to work outdoors in varying weather conditions and travel to multiple job sites, preferred What You'll Get As a Quanta Services employee, we offer a wide range of benefits to fit your needs. 401(k) with immediate matching and vesting Fully comprehensive benefits packages; Medical, Dental, Vision Your choice of PPO, HSA, FSA Short term and long term benefits Employee discounts on consumer goods Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.