Installation technician jobs in Connecticut - 2,055 jobs

* Low Voltage Cabling Technician *Description* We are seeking a skilled Low Voltage Cabling Technician to support network infrastructure installations. The technician will be responsible for pulling, testing, and terminating Cat6 cabling in commercial environments. This role involves working on structured cabling projects and supporting broader lowvoltage installation needs. *Responsibilities* * Pull, route, and dress Cat6 (and Cat5) network cabling * Terminate Cat6 cables using jacks, patch panels, and connectors * Test and certify cable drops using standard testing equipment * Maintain a clean, organized, and safe job site * Assist with additional low-voltage tasks as needed *Required Skills* * Experience with network cable installation, including: * *Cat6 cabling* * *Cat5 cabling* * Ability to use hand tools and testing equipment * Strong attention to detail and ability to follow installation standards *Top Skills* * Cable installation * Cat6 * Cat5 *Additional Skills & Qualifications* * Ability to pull, test, and terminate Cat6 cable * Reliable transportation * Ability to lift 50+ pounds and work on ladders *Job Type & Location* This is a Contract position based out of Greenwich, CT. *Pay and Benefits*The pay range for this position is $25.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Greenwich,CT. *Application Deadline*This position is anticipated to close on Jan 23, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

you will Love (4+ years experience required) *About us* We have low employee turnover and here's why... See what our employees have to say by watching this video ******************************************* Our business model at Homestead since 1989 is to provide value to our clients. We believe that anyone can be the cheapest, but we prefer to serve our clients with quality workmanship and durable systems that will last and keep them comfortable year round. We take pride in our work and always support our employees for doing things the right way the first time. We're also growing, Our technician staff has grown by 133% in the last 5 years, and that type of growth provides opportunities for employee growth as well. We're a family of employees that support each other and have fun while doing work we are proud of. You will love the company culture, the personal touch, the team atmosphere, and positive work environment that you cannot find at large companies but you will still have the opportunities and benefits that small companies cannot provide. On top of that, we have the best on call rotation around, an updated fleet, on site warehouse, fully mobile work orders, team atmosphere, and training opportunities to grow your skills. We hold regular meetings with our techs to sharpen their skills and create a team atmosphere that is second to none. We're different than the big companies that pay a lot of money but don't treat people well. Schedule an interview to meet us and learn who we are. Learn more about us by visiting our careers page at *********************************************** *Licensed HVAC Technician* *Homestead Plumbing, Heating, Cooling, Energy & Water - Ellington, CT* Homestead Comfort, located in Ellington, CT has an opening for a service tech. We service the top lines of equipment and service mostly residential with some light commercial. Join our team and immediately start serving our loyal client base. Why work for us? * Join a company looking to grow and invest in the team member's future * A positive environment with career path advancement opportunities * Year-round work * A great reputation built around a loyal client base * Great benefits package including paid vacation, uniforms, quarterly lunches, etc. * Spacious and comfortable high roof service vehicles. * Top of the line tools. *Pay Scale:* DOE from $40-$50 per hour based on experience. *Work Hours:* 7:00 am-4:00 pm or when the jobs are finished. Overtime as needed *Primary Job Function: *Our service techs are doing maintenances on equipment and running services calls for our loyal customer base. We take pride in the work we do and train our techs to be competent at installing and servicing all types of equipment so we can continue to be a leader in implementing new technologies. *Required Qualifications:* * Installation and troubleshooting capabilities for residential heating and cooling equipment/systems. * Insurable by company insurance carrier * High school/technical school diploma or equivalent. * Valid drivers license. * Willingness to learn. * Pass a pre-employment drug screen, as well as undergo a thorough background check. Job Type: Full-time Pay: $40.00 - $50.00 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Paid time off * Retirement plan * Vision insurance Work Location: In person

ICONN Drafting & Design is committed to advancing the mechanical and plumbing virtual design industry through innovative solutions that merge hands-on experience with cutting-edge technology. As a woman-owned business, we take pride in our unique approach that blends a strong work ethic with advanced technological tools. Our team values creativity, problem-solving, and a forward-thinking mindset to revolutionize the industry. Based in Newington, CT, we are driven by a passion for redesigning the future of virtual design in construction. Role Description This is a full-time hybrid role for a Revit Technician based in Newington, CT, with some flexibility for remote work. The Revit Technician will be responsible for preparing technical drawings for mechanical and plumbing systems, Revit troubleshooting, maintaining Revit Famlies and systems, as well as collaborating with project teams to ensure design accuracy and efficiency. Qualifications Proficiency in Technical Support, Troubleshooting, and Operating Systems Experience with Computer Maintenance and Computer Repair Strong skills in Revit software Detail-oriented with excellent problem-solving and analytical skills Ability to work both independently and as part of a team in hybrid work situations Experience in construction or MEP (mechanical, electrical, plumbing) drafting preferred

The Service Technician - SBE is responsible for repairing and reconditioning equipment in the profit center and/or customer locations. Responsible for installation of equipment for customer accounts and is responsible for diagnostics of mechanical, electrical, and plumbing problems and takes corrective action. Provides customer assistance in resolving customer questions, problems, or complaints regarding equipment. Job Responsibilities ? Calls on customers as assigned by Service Manager or General Manager to investigate operating difficulties of equipment. Diagnoses problems and figures out reasons and the nature of correction. ? Makes repairs or adjustments to equipment to return the equipment in working order. ? Cleans and maintains equipment on location including exchanging decanters and cleaning brewers. ? Documentation including verification of the closing calls, invoice completion, asset verification and any required customer documentation ? Repairs and refurbishes equipment; maintain spare parts levels. ? Ability to accurately collect work completed in company provided mobile device. ? Maintains a good working relationship and liaison with customers to maintain a positive image of the company and product. ? Perform scheduled and unscheduled service activities including emergency service calls, preventative maintenance, surveys, and installations. ? Maintains service area and vehicle in a clean and organized condition. Follows company guidelines on safety and operates vehicle in a safe manner. ? Completes weekly Driver Report and follows guidelines in the Fleet Manual. ? Follows all safety standards and policies set by manufacturers and company. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications ? High School Diploma or GED required ? Solid understanding in repairing small electrical appliances. ? Must be willing to learn how to connect equipment to water sources, add additional lines and drainage when vital. ? Must be willing to learn how to work with copper, braided and pex lines. This skill is normally developed through six months to one year of experience in the equipment service operations or through vocational training. ? The ability to read and write in English is required. ? Must also possess effective communication and customer service skills. ? Incumbent must have an acceptable driving record and a qualified driver?s license. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking & standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook , Instagram and Twitter .

JobID: 3018493 JobSchedule: Full time JobShift: : ADT is an innovative, culturally diverse company that empowers and inspires its employees. A culture where we are encouraged to bring new ideas to our workplace. As times change, so do we. We drive innovation and continue to evolve as an organization. Our goals are achieved by initiating change, enhancing product lines and building strategic partnerships. What defines success at ADT? The Residential Installation Technician's primary functions and responsibilities are to evaluate the customer's needs, design, install, and educate the customer on the use of their system. What are your key responsibilities? * Work with the customer to determine optimal system and equipment to meet their needs. * Install and test the operations of all equipment to ensure proper functionality and signal reception required to establish service. * Evaluate the information provided and work with the customer to provide the best possible solution for their location. * Identify opportunities to improve the use and functionality of the customers system and provide those recommendations. * Pursue safety practices to safeguard against injury and damage to property. * Assure against loss of unused materials, ladders, and tools on a job site or office location. * Collect all debris, patch any holes, and clean the site, leaving it as nice or in better condition than when started. * And any other duties needed to help drive our vision, fulfill our mission and abide by our organization's values. * You will work in a dynamic, collaborative environment, working closely with customers and coworkers. * This role involves providing solutions by visiting customers at their homes or businesses. What are we looking for? * Customer focused and customer driven mindset * Technical aptitude * Strong verbal communication * Thrive in the face of uncertainty * Valid driver's license * High School degree or the equivalent * Electronic Trade School training is a plus! What's in it for you? * Full benefits on the 1st of the month after 31 days of employment * Casual yet energetic and engaging work environments * Medical, Dental, Vision, 401(k) with employer matching * Paid vacation time (We all need to recharge) * Tuition reimbursement, employee referral bonuses * A culture of coaching, development and career growth opportunities

Job DescriptionSalary: $22.00-$40.00 WERE HIRING! FULL-TIME Service & Repair Technician Join a trusted, family-owned company with 45+ years in the hearth & spa industry! What Youll Do Service & maintain wood, gas & pellet stoves, fireplaces, and hot tubs Troubleshoot mechanical & electrical issues (Residential & Commercial) Respond to work orders professionally and on time Keep accurate account of open work orders Follow all safety procedures and manufacturer guidelines Provide excellent customer service and build positive client relationships Keep accurate account of open work orders and daily service reports Address client concerns and provide timely follow-ups to ensure client satisfaction Perform diagnostics and preventative maintenance checks Maintain a clean, organized, and well-stocked work vehicle Communicate effectively with team members, dispatch, and management Educate customers on proper usage and maintenance of their systems What Were Looking For Mechanical aptitude well train you! Light plumbing/electrical experience = highly preferred Hot tub experience a plus! Self-motivated & able to work independently Must be 18+ with a valid CT drivers license Familiarity with tools (own tools a bonus) Desire to help people Grow With Us We offer PAID TRAINING & CERTIFICATION Learn and get certified at your own pace Advance your skills while building a stable, long-term career! What We Offer Competitive pay Paid time off (PTO) Health & dental insurance Life insurance 401(k) retirement plan Advancement opportunities Supportive, team-oriented work environment Ready to Start a Hands-On Career with Real Growth? APPLY TODAY!

Hi, Greetings Hope you are doing great! I would like to update you on an urgent open position with our esteemed client. Please go through the Job Description. Send me your updated resume and expected rate for the below position Role: Technology Lead - Java/J2EE + WebServices Duration: Full Time Location: Groton, CT / Northbrook, IL Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 4 years of experience in J2EE • At least 4 years of experience in Java related technologies frameworks (Spring/ Struts/Hibernate), JSPs/Servlet, XML, Web Services (SOAP/RESTFUL), JBOSS. • At least 2 years of experience in Oracle 10g to 12c • At least 2 years of experience in Groovy on Grails • At least 4 years of experience in software development life cycle. • At least 4 years of experience in Project life cycle activities in Application Development/Maintenance projects. • Ability to work in team environment and client interfacing skills. • Ability to work in team in diverse/ multiple stakeholder environment • Analytical skills • Experience in Pharma/Life Sciences domain • Experience and desire to work in a Global delivery model Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

The Installation Technician reports to the Vice President/President and is responsible for performing a range of HVACR installation jobs for industrial, commercial, and residential customers. Customer-based activities require an individual possessing traits of decisiveness, initiative, tact, judgment, integrity, dependability, and the ability to communicate in a technically credible manner. Job-related contact can occur with virtually all demographic groups, with the majority of working contacts being customers, other A-1 Services, Inc technicians, the Vice President, President , the Estimator and the Parts Runner. Benefits Top pay Year-round employment Advancement opportunities and career growth plan Factory training In-house training Well stocked vehicle inventory Prevailing Wage Projects Tools program Paid holiday, vacation and sign on bonus Insurance 401K (with company match) Representative duties include:To provide heating and air conditioning systems installation according to company standards providing the customer with a high quality experience. Job Qualifications: One or more years of successful and full-time HVACR experience, either as a service or commercial installation technician. Good oral and reading skills, including the ability to read and apply manufacturers' installation instructions and clearly communicate with residential, commercial, and industrial customers, suppliers, and other A-1 Services, Inc employees. Physical ability to perform all duties noted above under the conditions, circumstances, and extreme weather conditions. Interest and initiative in maintaining his/her HVACR skills through a combination of self-study, company training, manufacturers' workshops, and other professional development activities. Interest and initiative in getting trained to develop point-of-service sales techniques including developing sales leads and conducting sales of unit replacements, add-on units, IAQ services, and service contracts. Current (CT) operator's license and the ability to operate all types of vehicles in the corporate fleet within 30 days of initial employment. Incumbent must be insurable by current insurance carrier. Ability to work efficiently given time pressures, non-standard schedule, extreme weather conditions, varying customer needs and demands, and backlog constraints. Valid OSHA 10 Valid CT (Pipefitter, Sheetmetal) License Compensation: $25.00 - $50.00 per hour We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. There are many exciting options for a career in HVACR waiting to be explored. If you're looking for a career that offers job stability, strong pay, benefits and more, then you've come to the right place!

Build your HVAC career with Pack-Timco, a Hickory company. We're Connecticut's go-to leader for residential HVAC services, delivering high-quality installations and service backed by a trusted brand. At Pack-Timco, we're not just installing systems, we're building an enduring company where employees set a new standard of excellence in sustainable heating and cooling What's in it for You? Excellent Pay: $28 - $65 per hour, depending on experience and certifications Health & Wellness: Medical, dental, and vision insurance Paid Time Off: Take time when you need it, no questions asked Retirement Benefits: 401(k) with company contribution to help secure your future Top-Tier Equipment: Company vehicle, iPad, phone, uniforms, and professional-grade tools provided Extra Incentives: Bonuses, commissions, and performance-based perks for high-achievers Why You'll Love It Here Mission-Driven: We're on a path to become the Northeast's largest sustainable heat installation and service company. Purpose & Values-Led: Our business is powered by values we live: Put Employees First Treat Everyone with Respect Delight Customers Raise the Bar Get Things Done Trusted Brand: As part of Pack-Timco, we offer a reputation built on excellence and reliability. Professional Development: Advancement paths into leadership and specialty areas Your New Role As an HVAC Installation & Service Technician in Norwalk, CT, you'll be at the heart of our mission to deliver best-in-class residential HVAC services. Your day-to-day includes: Installing and servicing a wide range of residential HVAC equipment: Central air systems Heat pumps Oil and gas furnaces and boilers Geothermal systems Ensuring all work meets safety codes and manufacturer specifications Delivering excellent customer service and maintaining a neat and professional job site Working efficiently in a team or independently, depending on the project Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. 3+ years of experience installing residential HVAC systems Valid EPA certification (preferred) OSHA 30 certification Valid driver's license Must be authorized to work in the U.S. Pack-Timco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #orange

CUI is seeking a dedicated and motivated Entry-Level Cable Technician to join our dynamic team. As a leading provider of comprehensive solutions in the cable industry, we are committed to delivering exceptional services to our clients. In this role, you will play a crucial part in assisting with the installation, maintenance, and repair of cable systems, ensuring seamless connectivity and superior customer satisfaction. At CUI, we believe in providing opportunities for growth and development. This entry-level position serves as a foundation for building a successful career in the cable industry. We offer comprehensive training programs and the chance to work alongside experienced professionals who will support your growth and mentorship. Responsibilities: Assist senior technicians with the installation and configuration of cable systems, including internet, cable, telephone, alarm services and other related equipment. Conduct routine maintenance and troubleshooting of cable systems to identify and resolve any technical issues promptly. Collaborate with team members to perform testing and quality checks on cable connections to ensure optimal performance. Adhere to industry safety guidelines and best practices to maintain a safe work environment for yourself and your team. Operate and maintain tools and equipment, ensuring they are organized and stocked in the company-provided work truck. Communicate effectively with customers, providing excellent customer service and addressing any concerns or questions they may have. Stay updated on the latest industry trends, technologies, and best practices through continuous learning and professional development opportunities. Requirements: Valid driver's license with an acceptable driving record. Minimum age requirement: 23 or older. Successful completion of thorough background checks and drug screenings. Physical ability to lift to 80 lbs., comfortable utilizing a ladder to work at heights of up to 30 ft., and maneuver in tight spaces/attics. Basic understanding of cable systems and their components is preferred, but not required. Ability to work in various weather conditions and physically demanding environments. Strong technical aptitude with the ability to quickly learn and adapt to new technologies and processes. Flexible work schedule, including weekends. Employee Compensation and Benefits: Earn from $800 - $1,200 per week plus a $500 sign on bonus. Paid training program to equip you with the necessary skills. Comprehensive benefits package, including health, vision, and dental coverage. 401k plan with company match. Company vehicle and gas card. Weekly pay schedule. Monthly bonus potential. Pay increase after the first year. Paid holidays. Uniforms provided. Company cell phone. Optional Benefits Waived Program: If you own a late model white truck/van and do not require medical benefits, you may be eligible for our Benefits Waived program. Speak with a recruiter for more details. About CUI Cable Services: CUI Cable Services is a leading provider of solutions for multiple system operators (MSOs) in the telecommunications industry. Since 2001, we have been delivering exceptional services, exceeding industry standards. As a registered minority-owned and veteran-owned business, we pride ourselves on practicing our Core 4 values of Honesty, Integrity, Teamwork, and Quality. These values shape our company's culture, drive our decisions, and inspire us to continuously improve and provide the best possible experience for our employees, customers, and partners. Hiring Process: Our efficient hiring process ensures a smooth transition into your future career. Here are the steps involved: Application review and phone screening: Our recruiters will review your application and conduct a phone screen to discuss the job description and your work experience. In-person interview: If selected, you will be invited for an in-person interview with our branch managers. Pre-employment screening: Upon accepting the job offer, you will undergo a pre-employment drug screening and a nationwide background check. Start date: After successful completion of the screening process, we will coordinate your start date. If you are looking to start your career in the cable industry, join the CUI team and become part of our dedicated workforce. Apply today and embark on a rewarding journey with opportunities for professional advancement and personal fulfillment. Join our team at CUI Cable Services and embark on a rewarding career in the telecommunications industry.

Join one of the most established, respected and well-known BMW Motorrad Dealerships in the country at MAX BMW Motorcycles. At the Northeast's only exclusive BMW Motorrad Service Department, you will be applying your skill and experience on leading BMW Motorrad product technology routinely and growing your career with access to the best manufacturer training in the industry. This Dealership was started by Technicians, so the business leaders understand how important their technicians are to the success of the business firsthand. As such, all Technicians are routinely provided OEM training to keep them informed of new product technology and efficient, successful “fix-it-right the first time every time” processes. The Team at MAX BMW is focused and committed to working together for success. As a result of growth and the need for additional Service Technicians to service the ever-popular BMW Motorrad product lineup, MAX BMW is seeking multiple Service Technicians to grow with the Team in the following locations. Location(s) New Milford CT Job Description As a Motorrad Service Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You'll be at the forefront of innovative Motorcycle diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched • Performing diagnostic services and troubleshooting to determine repair needs (using test plans, wiring diagrams etc.) • Providing labor, time, and parts estimates for repair services • Performing high quality and efficient repair services for various Motorcycle systems, including engine, steering, suspension, brakes in accordance with Dealer and Factory standards • Performing Quality Control checks for repaired vehicles to ensure repairs are complete • Completing all required paperwork and documentation for repair services • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times • Communicating directly and efficiently with Service Advisors and Parts Department Employees • Participating in continual Motorrad proprietary training/education programs to hone skills and develop expertise in industry leading Motorrad technologies and processes • Demonstrating behaviors consistent with Employer's values in all interactions Qualifications • At least 1-3 years of related mechanical / vehicular service & repair experience (Motorcycle / Powersport, Automotive, Heavy Equipment / Diesel, engine repair, etc.) • Passion for the Motorrad / Motorcycle riding lifestyle • High school diploma or equivalent • Demonstration of excellent mechanical, electrical, diagnostic and computer skills • Must be authorized to work in the USA without requiring sponsorship • 18 years of age or older • Own & maintain a valid driver's license • Must perform duties and responsibilities in a safe manner • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, drug test, and maintenance of a valid driver's license

DIVISION: Facilities Management DEPARTMENT: Facilities Management - Energy Services BASIC FUNCTION: Performs routine repairs and provides preventative maintenance on all heating, ventilating and air conditioning equipment; possesses familiarity with and ability to read electrical and mechanical drawings and is familiar with low voltage controls, motor controls and DDC controls; responsible for the cleanliness and safety of equipment in designated buildings; completes documentation; provides backup support and interacts with various supervisors. UNUSUAL WORK CONDITIONS: Work on roofs and climb ladders. Must be available for emergency call-ins. Must operate a motor vehicle. Capable of working alone and able to lift reasonable amounts of weight with no physical restrictions; must cover any shift due to vacation and/or illness. KNOWLEDGE AND SKILL NEEDED: EDUCATION: High School diploma, some trade school preferred. Connecticut State HVAC license required D2. EXPERIENCE: Experience in a systems-oriented environment with some limited exposure to servicing; familiarity with tools and instruments related to HVAC industry. Demonstrates knowledge of electrical techniques and ability to read floor plans etc. Possession of EPA, OSHA or state licenses or certifications is desirable. Must have a valid State of Connecticut driver's license in good standing and be in good physical condition. SCHEDULE: This is a 3rd shift position. The Energy Department workweek is on a rotating two (2) week schedule that provides employees work every other weekend as follows: Schedule days of work - Monday, Tuesday, Wednesday, Saturday, Sunday / scheduled days off Thursday, Friday; followed by scheduled days of work Monday, Tuesday, Wednesday, Thursday, Friday / scheduled days off Saturday, Sunday. REPORTS TO: Supervisor, HVAC ESSENTIAL FUNCTIONS: 1. To perform routine repairs and provide preventative maintenance on all heating, ventilating and air conditioning equipment located in campus buildings, dormitories, townhouses, apartment complex and the Central Utilities Facilities complex. This involves: Maintaining air handling units with filter replacements, pneumatic controls, exhaust fans, etc. Familiarity with and ability to read electrical and mechanical Drawings. Familiarity with low voltage controls and motor controls; familiarity with DDC controls (e.g., Alterton and Carrier Comfortworks), Ensuring the adequate operation, temperature, pressure and safety of equipment, Notifying supervisor of any abnormal pressures and temperatures before adjusting. Interacting with contractors as needed. 2. Assist on installations of new or repaired equipment utilizing knowledge of electrical and mechanical techniques. 3. To be responsible for the cleanliness and safety of equipment rooms in designated buildings. 4. To complete appropriate documentation. This involves: Assessing and completing requisitions on supplies needed for servicing, Maintaining and logging accurate records on malfunctions and repairs. 5. To provide backup support if the Associate Director of Energy Services and the Supervisor, HVAC are absent. 6. To interact with the Associate Director of Energy Services and the Supervisor HVAC on major equipment problems and recommending corrective action. 7. To participate in the growth and development of the department. This involves: Participating in regularly scheduled staff meetings and attending seminars as needed, Promoting an image of efficiency and courtesy throughout the university community and consistent with the department's mission. Providing recommendations on system modifications, upgrades, policies and procedures. 8. To promote safe and secure working conditions. This involves: Promoting the proper utilization of equipment and materials. Reporting immediately to supervisor any unsafe working conditions. 9. To perform other related duties as dictated or directed by responsibilities. Duties may be changed and/or be added at any time. *Disclaimer* The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Category: Facilities - Union Performs such other duties, responsibilities, and activities as required by supervisor and as departmental/University needs indicate. *Disclaimer The above information indicates the general nature and level of work performed by employees within this classification. It is not designed to contain and should not be interpreted as a comprehensive inventory of all duties, responsibilities, activities, and/or qualifications required or expected of employees assigned to this job. Duties, responsibilities, and activities may change and new ones may be assigned at any time, with or without notice. All offers of employment are contingent upon a satisfactory background check. Fairfield University provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Load a resume or CV first, then upload supporting documents including a cover letter at the bottom of the third page under the "My Experience" section where it says to upload a Resume/CV . You will be able to upload up to 5 other documents in this section. You will be unable to edit your application, so please have all documents available before applying. Faculty Positions: If you need to upload more than 5 documents, please either combine them to upload or email the additional documents to the applicable contact in the job description. Staff positions: If you need to upload more than 5 documents, please either combine them to upload or email them to ****************

Job Description Quit wasting your time with companies that couldn't care less about you and join Bartol Heating and Cooling, where your skills are recognized and highly valued! If you want to advance in the heating and cooling industry and build a long-term career with an incredible business, you could be the next full-time HVAC Installation Technician on our New London, CT team. Keep reading to learn more! WHY SHOULD YOU JOIN US? We strive to bring our clients levels of professionalism and excellence that they haven't previously experienced. This is only possible with an exceptional team of professionals. We are always looking to add top-notch employees who will play a huge role in our success as a company, and we care for their well-being with excellent compensation and a positive work environment. When you become our HVAC Installation Technician, you receive ongoing training, a company truck, and growth opportunities. You enjoy terrific benefits such as: Overtime Health insurance A 401(k) plan Paid time off Paid holidays Profit-sharing Supportive management We value your skills - that's why pay ranges from $50,000 to $115,000, based on what you bring to the team! Take charge of your career and make your mark as our new HVAC Installation Technician! ABOUT US We have been installing and servicing residential and commercial HVAC systems throughout Connecticut since 1988. We provide a range of services to our customers including heating, air conditioning, indoor air quality, ductless air systems, geothermal heat pumps, commercial refrigeration, and more! Custom ductwork is fabricated in our in-house sheet metal shop by state-licensed fabricators. The air conditioning and heating arena is our business, not a sideline. Bartol Heating and Cooling is very reliable when it comes to meeting project deadlines and is proud to say that our company has not missed a deadline yet. COME ADVANCE YOUR CAREER! As our HVAC Installer, you'll work with your team to complete accurate, high-quality installations for a variety of customers. Depending on your skills and experience, you may install systems in residential homes, commercial buildings, or refrigeration environments. You arrive at each job site fully prepared to install a wide range of heating and cooling systems. While completing your work, you also take time to mentor and train installation helpers, supporting their growth and development. You take pride in showing up on time, delivering excellent customer service, and ensuring every work area is thoroughly cleaned before the job is complete. You also keep your installation vehicle well-organized and notify management of any maintenance needs, helping the team stay efficient and ready for the next project. Our HVAC Installation Technician works from 7:30 am - 4:00 pm, Monday - Friday. Here's what we need from you: Connecticut HVAC trade license HVAC installation experience Valid driver's license and a clean driving record Strong customer service, communication, and mentoring skills Respectful attitude and professional appearance Do you have what it takes to excel in this installation role? Prove it by filling out our initial application today! Bartol Heating and Cooling is an AA/EOE (Affirmative Action/Equal Employment Opportunity) employer.

Job DescriptionDescription: If you're making 30% of production, ask yourself: “ Where's the other 70% going?” It's going straight into your clinic owner's pocket - while you're the one doing the work. Stop building someone else's dream. Start building your own.Clear Lakes Dental is coming to Bridegeport! We'll help you do exactly that by giving you the support and structure you need to launch your own clinic. Take a look at what our franchisees earned in 2024: Robbinsdale, MN: $8.8 million in annual revenue Brooklyn Park, MN: $4.3 million in annual revenue East St. Paul, MN: $5.3 million in annual revenue Coon Rapids, MN: $1.9 million in annual revenue (with just one dentist and one hygienist and a 4 day work week!) Check out clearlakesdentalfranchise.com for more franchise information! About Us Clear Lakes Dental is a full-spectrum dental group serving patients of all ages with nearly all insurance types. We're growing fast, but not at the expense of our people. We believe in partnership, transparency, and the power of doing the right thing-for our patients, and for our team. Straight Talk. Real Opportunities. Let's skip the fluff. At Clear Lakes Dental, we're building a new model. One where aspiring owner dentists can build their practice without starting from scratch or doing it alone. What Makes Us Different? Fully Staffed Support Team From recruiting to innovations, we help your office run smoothly & save you valuable time to simplify ownership. CLD is here for as much or as little support as you want. Development & Technology We are continuously improving and finding ways to help strengthen your relationship with your patients by streamlining their experience; from check-in to scheduling next visits. CLD is NOT just a dental company - we have a dedicated tech department that focuses on improving software technologies to bring to all CLD clinics. We are: Optimizing note taking to save providers' time. Exploring new fronts with innovative patient communication and scheduling. Creating in-house training software to maximize efficiency to ensure patient satisfaction. Proven Turn Key Systems in Place Each office has a team chosen by you , trained by us - so you can see a full schedule on your very first day. You focus on seeing patients - CLD focuses on supporting your office manager, to alleviate management headaches that come with traditional office ownership. The Ownership Track (This Is the Big One): Whether you want to retire at an early age or keep seeing patients - this is the right path-we've got the infrastructure, financial modeling, and mentorship to get you there. It's real. It's happening. And it's changing lives. If you're ready to stop clocking in and start building something real-let's talk. Apply today. Or reach out directly. Let's build your future together. Clear Lakes Dental provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Requirements:

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $26.83-33.56 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #LI-JH1 Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description Modern Heating & Air Conditioning in Milford, CT is calling all Lead HVAC Installers / Installation Technicians to apply to join our amazing team full-time! The typical schedule for this position is 8-hour shifts, Monday through Friday with limited on-call weekend work. WHY YOU SHOULD JOIN OUR TEAM We are a family-oriented company that values and appreciates all of our employees. We pay our Lead HVAC Installers / Installation Technicians a competitive wage of $35 - $45/hour plus bonuses and commissions. Our team also enjoys great benefits, including medical, dental, vision, a 401(k) plan with profit sharing, holiday and vacation pay, company-provided uniforms, training and development programs, and a great work environment with steady work and an existing customer base. We also make it easy to apply with our initial quick, mobile-optimized application. If we have your attention, please continue reading! ABOUT MODERN HEATING & AIR CONDITIONING We are a fully licensed local heating and air conditioning services company that's been serving residents of the Southern Connecticut area for over three decades. Our team provides expert residential and commercial HVAC services, including repairs, maintenance, installation, and replacement of both heating and air conditioning systems, indoor air quality solutions, and more. Some of our top priorities include attention to detail with superior craftsmanship and reliable service that our customers can count on time and again. We believe that having a fulfilling career means not just loving what you do but also doing it alongside people you admire, which is why we strive to offer a family-like work atmosphere where our employees feel respected, valued, and sincerely cared for. Excellent pay and benefits are a couple of the other ways we show our employees that they are highly appreciated. ARE YOU A GOOD FIT? We are looking for someone who is motivated to do quality work and further their career as a Lead HVAC Installer / Installation Technician. Ask yourself: Do you have strong communication skills? Are you a self-starter? Do you thrive in a collaborative team environment? Are you a natural-born leader? Can you maintain a positive, can-do attitude? Do you have excellent organization and time management skills? If so, we want to meet you! WHAT WE NEED FROM YOU We need you to install heating and cooling systems while maintaining communication with our clients, team, and the office. If you can do this and meet the following requirements, apply today! S2 or D2 license preferred Physical ability to lift 50 lbs. and perform typical tasks associated with installing heating and cooling systems Ability to pass a drug test upon hire Valid driver's license and a good driving record Must complete the Wedge Video Interview to be considered Having experience installing heating and cooling systems is preferred but not required! Location: 06460 Job Posted by ApplicantPro

Job Description Tired of scrolling past the same job ads? Let's make this simple! Job Opening: Experienced HVAC Technician - Installer @ Steve Basso Plumbing, Heating & A/C, Bridgeport CT Pay Range: $35- $45 per hour, depending on experience Schedule: Monday - Friday, 7:00 AM - 5:00 PM How We Care For Our Team: 100% company-paid health insurance Paid holidays Vacations A 401(k) with a 3.5% match Education reimbursement After 12 months, we'll pay for a personal financial consultant Company cell phone, tablet, uniform, and vehicle THE VITAL ROLE YOU HAVE AS OUR EXPERIENCED HVAC TECHNICIAN - INSTALLER: You arrive ready to tackle the day's assignments, skillfully executing essential system repair when immediate issues arise, methodically carrying out scheduled maintenance checks to preempt breakdowns, and expertly managing the end-to-end process for complete system installation projects. What You'll Need: Class D or S Connecticut Journeyman license 5+ years of experience with residential heating and air conditioning installations and services Valid Connecticut driver's license and a clean driving record COME THRIVE WITH US! When individuals seek relief from sluggish and ineffective home comfort services, they turn to us. Established in 1974, our company is dedicated to delivering exceptional repair, maintenance, and installation services, all while placing a strong emphasis on customer satisfaction. We understand the significant time and financial investment people make in their homes, which is why our technicians are highly trained and focused on efficiency. As a locally-owned and operated business, we are able to provide the personal attention our customers truly deserve. We are passionate about our work and seek to hire individuals who share that enthusiasm! Our distinct business model is built on integrity and outstanding practices, creating a culture where every employee can thrive. We encourage our team members to enhance their skills and knowledge since we want our employees to succeed both technically and financially. Along with a supportive team atmosphere, we also offer competitive pay and generous benefits to our dedicated staff. If you believe this Experienced HVAC Technician - Installer position matches your requirements, applying for it is a breeze. The initial application process can be completed in minutes. Best of luck! Must be able to pass a background check. We also conduct pre-employment drug testing. Any job offer will be based on the results of background and drug testing Job Posted by ApplicantPro

Job DescriptionDescription: Connecticut HVAC Technicians & Installers - $5,000 Sign-On Bonus! This application is for CT trade licensed journeymen license types: D1, D2, S1, S2, S10, SM2, S4 Why Encon? $5,000 Sign-On Bonus for eligible licenses Quarterly bonuses & recruiting incentives Company van + gas card for eligible techs Paid training and career advancement Medical, Dental, Vision + 401K match Paid travel + paid time off Discounts, wellness perks, and more! What You'll Do: Depending on the role you would work in Service or Installation or both! Let us know in the application which you prefer. Service Technicians: Diagnose and repair heating and cooling systems Perform preventative maintenance Handle emergency calls and keep tools/job sites clean Installers: Read blueprints and install ductwork/equipment Collaborate with project teams and clients Work on new builds and retrofit installations Required Skills & Experience Connecticut D1, D2, S1, S2, S10, S4 or SM2 Trade License Strong communication and problem-solving skills Experience reading schematics/blueprints Professional attitude and commitment to quality and customer service Ability to operate a computer and assigned software (including email) Eligibility Requirements This position requires a valid driver's license. Employment/education will be verified. Applicants must be currently authorized to work in the United States on a full-time basis. Encon is a drug free workplace and requires post-offer pre-employment drug testing. Physical Requirements Able to work in a variety of extreme weather, hot and cold conditions. Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces. Able to work safely at elevated heights such as rooftops, ceilings, and ladders. Able to bend, crawl, stoop, stretch, and reach. Able to walk on uneven surfaces. Able to work off a ladder, sometimes at heights. Able to safely lift 50 pounds. Encon Heating & AC complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Encon Heating & AC does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE Requirements:

Job Description Field Service Technician We are looking for a skilled and motivated Field Service Technician to join our team. This role involves traveling extensively to client sites in Connecticut and Massachusetts to provide maintenance, troubleshooting, and repair services for advanced safety systems. This is an ideal opportunity for individuals with technical expertise who enjoy hands-on work and solving challenges in dynamic environments. Key Responsibilities: Conduct preventative maintenance, diagnostics, and repairs on specialized safety systems. Replace components and assist with the installation of new equipment as needed. Perform system tests to ensure all hardware and software meet operational standards. Maintain detailed records of service activities in the company database. Support remote troubleshooting and provide technical assistance to on-site personnel when not traveling. Qualifications: Experience with security or fire alarm systems, low voltage wiring, and networking. Familiarity with CCTV, thermal imaging cameras, and other advanced technologies. Strong troubleshooting, communication, and customer service skills. Ability to work independently, manage service calls, and adapt to different environments. Comfortable working in tight spaces, at heights, and using a boom lift. Proficiency in English; Spanish bilingual skills are a bonus. Valid driver's license with a clean driving record and willingness to travel extensively (up to 75%). You should be proficient in: Equipment Troubleshooting Electrical Troubleshooting Skills Troubleshooting Skills Mechanical Troubleshooting Skills Electrical Installation Electrical Troubleshooting Electrical Repair