Installation technician jobs in Las Vegas, NV

Must Haves: 3-5 years of experience working in a datacenter as a technician. Experience racking and running cables. Ability to work onsite in Las Vegas, NV.

The primary responsibilities of the Coax splicer will be to splice/test coax cables aerial and underground in both outside (OSP) and inside (ISP) settings. Read, create, and maintain splicing schematics, and diagrams, and create/maintain accurate splicing and field notes. Maintain control of outside plant (OSP) - inside plant (ISP) activities surrounding the assigned work area(s). Support project timelines, conduct inspections, designing and providing accurate as-builts for projects. Other duties, responsibilities and qualifications may be required and/or assigned. (This is meant to be a guide. Duties may vary dependent upon management.) Essential Position Functions: * Able to splice/terminate, and test OSP/ISO coax cables. * Able to read and interpret work orders, specifications, engineering drawings and/or cut sheets to determine work to be done in sequence of task. * Repair or splice-in new line as needed to complete the testing and certification of the project. * Place and install required coax cable when necessary to complete assignment. * Ability to ground and test system. * Install all passive and active devices per customer requirements. * Test Coax/RF lines for balanced signal between points- continuity and fault * Able to work on activate underground and aerial lines. * Optimize new nodes and splice in node splits to reduce capacity. * Utilize RF meters and TDR (time-domain reflectometers). * Close a project by completing production sheets, verifying proper levels after activation, and adjust and troubleshoot as necessary. * Ensure that all work considers the safety of the customer and public and compliance with all governmental orders. * Ability to safely utilize bucket trucks, access manholes, and hand holes. * Use of hand tools, ladders, and equipment to assist in the completion of an assigned project. * Daily documentation of work performed, material usage, and other record keeping tasks. * Daily timekeeping required. * Perform work following established and TrueNet mandated Safety and Health guidelines. * Ability to solve problems quickly and effectively with little to no supervision. * Other duties as required. Education and/or Experience: * High school diploma or GED preferred. * 1+ years' coax splicing experience preferred. * 1+ years' MSO/CATV experience preferred. * Ability to read and follow engineering design maps. * Ability to understand signal level meter, volt-ohm meter, AC clamp meter television test set, spectrum analyzer basic time domain reflectometer, system maps sweep gear, preferred. * Must have basic Microsoft Office (Word, Excel, Outlook) skills. * Must be able to efficiently use a Windows-based computer. * Ability to prioritize and complete assignments accurately and in a timely manner. * Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. * Strong interpersonal, organizational, oral, and written communications skills. * Must be able to work alone, and with a team. * Must possess a valid driver's license and have a clean driving record. * Must be able to pass a background check and drug screen. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Frequent walking, standing, climbing, bending/twisting, pushing/pulling within the work area. * Must be able to pass a DOT physical to obtain and maintain a DOT Health Card. * Must be able to work in a confined space and at high elevations/aloft 40' (poles, hydraulic lift buckets, ladders). * Must be able to lift, up to 100 pounds. * Ability to effectively communicate with employees, management, peers, et al. * Must be able to work in various weather conditions (hot, cold, wet, and dry). Work Environment: The work environment characteristics described here are representative of those of a field environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Must be able to travel up to 50% (most travel is planned). * Ability to work in all temperatures, climates, and weather conditions. * Must be able to work nights and weekends, as needed, to meet client needs. * Full knowledge and capability of driving a bucket truck and/or pulling a trailer. * Carry, set-up and extend ladders weighing up to 100 lbs. * Working in/on buckets trucks, ladders, and utility poles at heights of up to 40 feet. * Must be able to work in loud, noise-filled, environment out in the field. * The position requires working independently, as well as part of a team. * This position requires verbal and face-to-face contact with others daily. * Frequent use of a computer is necessary. * This position requires use of all general office equipment.

Full-time Description We are seeking an experienced Cable Splicer & Tester to join our growing telecom wireline team. The ideal candidate will have hands-on expertise in fiber optic and copper cable splicing, testing, and troubleshooting for large-scale deployments. This role is critical to ensuring high-quality network builds, customer satisfaction, and on-time project delivery across multiple markets. Requirements Key Responsibilities: Perform cable splicing, termination, and testing for both fiber optic and copper networks. Conduct OTDR, power meter, light source, and other industry-standard tests to ensure cable integrity and quality. Troubleshoot, diagnose, and repair cable issues in both aerial and underground environments. Read and interpret splicing diagrams, schematics, and work orders. Maintain accurate documentation of splicing records, test results, and project deliverables. Follow safety standards and industry best practices while working in the field. Interface with project managers and team leads to provide status updates and ensure customer deliverables are met. Support multiple markets as needed with up to 75% travel. Qualifications Proven experience as a Cable Splicer & Tester in the telecom wireline industry. Strong technical knowledge of fiber optic and copper splicing techniques, testing equipment, and documentation standards. Ability to work independently and with teams in both aerial and underground construction environments. Familiarity with industry safety regulations and procedures. Excellent troubleshooting skills and attention to detail. Valid driver's license (company truck provided as needed). Willingness to travel between multiple markets. Bucket truck operation experience and CDL license preferred. What We Offer Competitive pay up to $35/hour (based on experience) Company truck provided (as needed) Medical, dental, and vision insurance options. 401(k) retirement plan 8 paid holidays Vacation time / personal time Opportunities to work on large-scale, high-profile projects across multiple regions Travel opportunities with covered expenses Growth potential within a national turnkey provider Salary Description Up to $35/hour based on experience

**Amentum** is seeking a **Locksmith** at **Creech AFB** to Installs, repairs, rebuilds, and services mechanical or electrical locking devices by performing the following duties. **Compensation** + HIRING HOURLY Rate of Pay: $35.90; Hourly rate set by CBA. **Benefits:** + Amentum offers the following benefits for this position, subject to applicable eligibility requirements: medical, dental and vision insurance, 401(k) retirement plan, life insurance, long term and short-term disability insurance, paid time off, and parental leave. + This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: Please visit our careers site: ********************** **Essential Responsibilities:** + Inspects, repairs and certifies GSA containers and vaults + Inspects and repairs high security locks such as: LKM7000, KABA Mas X-09/X-10 + Disassembles locks such as padlocks, safe locks and door locks, and repairs or replaces worn tumblers, springs, and other parts. + Inserts new or repaired tumblers into lock to change the combination. + Cuts new or duplicate keys. + Moves lock-pick in cylinders to open door locks without keys. + Opens safe locks by drilling. + Keeps records of locks and keys. + Complete projects from initial layout to final assembly or installation to include basic structural framework. + Repairs door screens; replaces or repairs window locks and operators. + Perform all other position related duties as assigned or requested. **Minimum Position Knowledge, Skills, and Abilities Required:** + Must possess GSA Certified Safe and Vault Technician and Inspector Certification. + High School diploma or general education degree (GED), three (3) or more years related experience and/or training, or equivalent combination of education and experience in the locksmith field. + Must maintain a valid state driver license and be qualified to operate government general-purpose vehicles. + Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. + Ability to write routine reports and correspondence. + Ability to speak effectively before groups of customers or employees of organization. + Ability to add, subtract, multiply, and divide all units of measure, using whole numbers, common fraction, and decimals. + Must be able to compute rate, ratio, and percent and to draw and interpret bar graphs. + Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. + Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. + Must maintain a Master Locksmith-State required license. **Work Environment, Physical Demands, and Mental Demands:** While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles, toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk and risk of electrical shock. The noise level in the work environment is usually moderate. The employee is frequently required to walk use hands to finger, handle, or feel reach with hands and arms: talk or hear and taste or smell. Requires climbing on ladders, scaffolding, and platforms: standing, bending, and working in cramped areas: lifting and carrying tools and equipment which occasionally may weigh over 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

At Safe Haven Security, we are more than just a home security company! We are a team of dedicated professionals who are passionate about making a difference in the lives of our customers and our employees. Our mission is to provide peace of mind and protection to families across the country, and we achieve this by offering cutting-edge security solutions and exceptional customer service. Position Summary Safe Haven Security is looking for an Installation Technician / Security Advisor to join our organization. In the role of Installation Technician / Security Advisor you will play a crucial role in providing best-in-class service to our customers by installing, servicing, and troubleshooting residential alarm and automation systems. Your primary goal will be to ensure the proper functioning and optimal performance of security systems, providing our customers with peace of mind and protection. In this role you will: Perform installation of security alarm systems including control panels, sensors, cameras, and other related equipment. Engaging in sales consultations with customers to understand their needs and recommend appropriate security solutions. Diagnose and troubleshoot technical issues related to the customer's security alarm systems, identifying root cause, and implementing appropriate solutions to ensure proper function. Conduct thorough testing of installed security systems to ensure all components are functioning correctly and make necessary adjustments or repairs. Educate customers on the proper use and functionality of their security alarm systems, ensuring they are comfortable and confident in operating the equipment. Complete all necessary paperwork, including installation reports, service tickets, and inventory records, ensuring accurate and up-to-date documentation of all installations and repairs. Stay updated on knowledge of security alarm systems, emerging technologies, and industry standards in a fast-paced, and demanding work environment. To be successful in this role, you should have: The ability to obtain or possess basic tools necessary for the job duties. Proficient in installing, troubleshooting, and maintaining security alarm systems, including control panels, sensors, cameras, and related equipment. Excellent interpersonal and communication skills to interact with customers in a professional and courteous manner, providing clear instructions and addressing any concerns or questions. Ability to diagnose and resolve technical issues efficiently, utilizing problem solving skills to identify root causes and implement effective solutions. What Safe Haven requires in a candidate: Auto insurance coverage must meet company standards throughout employment. Must be able to obtain or possess an alarm agent permit where applicable and according to Federal, State, and Municipal laws. Must be able to obtain or possess a valid driver's license and driving history must meet company standards throughout employment. High School diploma, or equivalent. Physical requirements of the role: Candidates in the role of Installation Technician / Security Advisor must meet these physical requirements to ensure not only their own safety, but also the quality and reliability of the installations performed. All potential employees will be evaluated for these requirements as part of the hiring process. Sustained periods of standing, climbing on ladders, and maneuvering in tight spaces. Ability to use hand and power tools, and the ability to handle small components accurately. Ability to lift, carry, and position heavy objects up to 50 pounds, potentially overhead or in awkward positions. Keen eyesight for detailed work. Frequent bending, crouching, reaching, and maintaining balance while working on ladders or at elevated heights. Capability to work in diverse indoor and outdoor environments, enduring temperature fluctuations and inclement weather. Ability to drive personal vehicle for long periods of time throughout the day.

Job Type: Per Required Need Retail Display Installer - Technology Schedule: Work Monday-Friday | Weekends are not required! 2020 Companies seeks a reliable, detail-oriented, and self-motivated Field Service Representative to join our team and represent leading brands like Dell, Intel, Dyson, Google, and HP. In this role, you'll execute a wide range of in-store tasks, including: Installing and updating sales floor fixtures and endcaps Performing buildouts, resets, and display repairs Following plan-o-grams and client-specific directives You'll work independently, meet deadlines, and use mobile applications and technology to complete assignments efficiently and professionally. Strong communication and organizational skills are essential, as you'll manage store-level relationships and ensure top-quality execution on every project. Our Benefits: $18.00 per hour, depending on location and candidate experience Next-day pay on demand with DailyPay Paid drive time and mileage reimbursement Job assignments are available Monday-Friday | Weekends are not required! Paid training Job assignments include both flexible self-scheduling options and fixed shifts based on availability Maintain a minimum of 20 hours of fieldwork within a rolling 30-day period Variety of projects and clients We'd love to hear from you if you're ready to own your work, represent major tech brands, and thrive in a dynamic retail environment. Job Description: Key Responsibilities: Respond and remain responsible for consistent communication with field services management quickly (within 24 hours of contact). Representatives are responsible for keeping their availability updated and accurate. Fully complete all assigned jobs on or before scheduled end dates. Installing and building displays, end caps, and fixturing. Complete necessary forms /images/ surveys associated with each job/assignment before leaving the job site. Maintaining and updating displays according to planograms/ client requests. Conducting break-fix repairs to ensure displays and fixtures are fully functional. Participate in early morning installations and installations involving a team of 2+ people and provide solution feedback. Manage virtual software and ensure successful execution of related tasks and timelines. Contribute to the team's success by assisting other members as needed. Adhere to timelines associated with accurate timecard submission, reporting anomalies daily with needed corrections. Work independently in a fast-paced environment. Participate and complete training and certification programs. Accurately track, record, and communicate activity via designated systems/ workflows. Available for weekend assignments as needed. Scheduling / Planning Your hours and locations may vary week to week, including occasional weekends; some early morning hours are possible, and/or holidays based on store/client requirements. This role involves executing multiple job functions as agreed upon. Accept and schedule all assigned jobs within 48 hours of receipt Project Execution Following all directives as provided, executing fully and completely Work closely within the shared services team to ensure goals, identify opportunities for improvement, communicate and drive solutions while ensuring operational efficiencies. Relationship Development: Build and maintain strong relationships within the shared services team: local/regional markets, clients, retailers, and other stakeholders. Cultivate and sustain strong relationships with internal teams, clients, retailers, and field representatives, fostering collaboration and communication. Leadership & Cross-functional Work: Demonstrating professionalism, effective communication skills, and strong leadership abilities while representing the company. Setting a high standard for behavior, fostering a positive work environment, and ensuring transparent, respectful communication with all team members. Work across all aspects of the company and through cross-functional processes to ensure alignment and operational success. Customer & Client Satisfaction: Ensure customer and client satisfaction is met / continually improved upon according to established shared service field KPIs as determined by field management. Be open to provide and receive feedback. Qualifications: Age / Eligibility Must be 18 or older (due to insurance requirements). Must be authorized to work in the United States Availability Flexible availability Monday through Friday. Weekend and holiday availability as needed. Early morning and late-night availability as needed. Maintain a minimum of 20 hours of fieldwork within a rolling 30-day period. Physical Abilities Climb a ladder up to 10 feet in height. Safely lift and carry up to 60lbs. Able to kneel, walk, crouch, bend over, handle/grasp, and reach overhead Adaptability Ability to adjust to the ever-changing variety of tasks and work environments. Communication Skills Effective communication abilities, primarily via phone, text, and email, to coordinate tasks and provide updates. Use a smartphone for various tasks, such as clocking in and out, taking and uploading photos, downloading applications, and connecting to the internet. Respond and remain responsible for consistent communication with field services management quickly (typically within 24 hours of contact, but may vary depending on the project/assignment/task/client/location being supported). Education A high school diploma or equivalent is typically required. Previous retail or merchandising experience is beneficial but not mandatory. Experience Preferred Installation and merchandising experience. Proficiency with hand and power tool usage. Ability to follow planogram (POG) directives and secondary communication. Technology Must own an Android or Apple mobile device to upload photos and data. Must be able to successfully navigate various communication platforms and applications independently. Training Must complete all training assignments and tasks within a designated time frame. Agents are expected to be able to work collaboratively and autonomously. Transportation and Travel Must have reliable transportation. Valid driver's license and proof of insurance. Willingness and ability to travel up to 90 miles from home per assignment/shift/daily. Leadership & Communication: Superior leadership skills and strong professional communication and presentation skills. Ability to make sound decisions, show good judgment and problem-solve effectively. Capable of working autonomously with excellent time management and reporting skills. What You Can Expect From 2020 Companies We welcome every voice, and we are committed to building a truly inclusive environment where your differences are not just welcomed, they are celebrated. We are always identifying opportunities to encourage our team to be their authentic selves, while working to provide a best-in-class experience for our employees. Whether that's paid holidays, long-term career pathing options, personal development opportunities or professional stretch assignments, you can expect 2020 Companies to support you. 2020's Commitment We are committed to creating a diverse and inclusive organization and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other dimensions of identity.

Senior Fire Alarm Technician/Programmer Our company was founded on the belief that our Associates are the single most important key to success, and we want to help you build the career of your dreams. As an up-and-coming company, we are growing and can offer you many opportunities to design your career path. We provide manufacturer training, industry-specific training, and internal promotion and advancement. As we grow, you grow. Summary: As a Senior Fire Alarm Technician/Programmer in the Fire Protection Industry, you will be responsible for the installation, programming, maintenance, and repair of fire alarm systems. Your role will be pivotal in ensuring smooth operations by providing technical expertise and ensuring compliance with relevant codes and standards. This position is open to start in either of our Las Vegas or Reno offices! Responsibilities: 1. System Installation and Programming: Install, configure, and program advanced fire alarm systems, including control panels, detectors, alarms, and notification devices. Customize system programming to meet specific project requirements and ensure proper integration with other building systems. 2. Maintenance and Repair: Perform regular maintenance and testing of fire alarm systems to ensure optimal performance and reliability. Troubleshoot and diagnose issues, report technical problems, execute repairs, and replace components as necessary. 3. Project Management: Lead and coordinate fire alarm system installations, upgrades, and retrofits. Develop project plans, timelines, and resource requirements. Guide field technicians on company systems, service offerings, and provide technical sales assistance, support, and product demonstrations on the latest company products to Sales Executives. 4. Compliance and Documentation: Ensure all systems comply with national, state, and local fire safety codes and regulations. Maintain accurate documentation, including system schematics, programming records, and service reports. Prepare detailed reports for inspections and audits. Stay current with building technology product documentation and communicate updates and design strategies to Field Technicians, Specialists, and Sales Executives 5. Communication: Communicate effectively with clients to understand their needs and provide technical support and recommendations. Conduct training for clients on system operations and maintenance. 6. Miscellaneous Tasks: Travel to project sites as needed. Perform other duties as assigned. As an Associate, you will join our team and gain the following: Competitive Salary with Benefits Package Creative Work Environments, You Tell Us What Works for You! You can set your shifts Room to Grow! Your Only Limit is the one You Set! Starting at any level, you can work your way up as high as you desire, and we will help you get there. We support furthering your education and valuable training. Establish a career with a winning team that takes pride in Fire, Life, and Safety. We protect lives and property. Enjoy working at a company that empowers you. Enjoy working at a company that challenges you and appreciates you. Enjoy working at a company that values your commitment and contributions. Enjoy working with your Associates. Equal opportunity employer. Our Associates love the challenges we face, and we meet them head-on as a team, collectively. We support one another in and out of work. Our Associates are here for the long run. We have charitable causes we support. We conduct team-building exercises. We aspire to be the best at what we do in our industry. We aspire to build an exceptional company supported by exceptional Associates. Qualifications: High school diploma or equivalent; additional education or relevant certifications are a plus. F-Card, NICET, OSHA-30, Lift, CPR and Siemens (or other) Programming Certifications (required). 5+ years' experience in installing or servicing electronic control systems. Proven experience in a senior or lead technician role highly preferred. Proficiency in Microsoft Office Suite (Word, Excel, Outlook). Great verbal and written communication skills. Problem solving and analytical skills. Ability to read and interpret technical manuals, blueprints, and schematics. Reliable and adaptable, with the ability to work independently and as part of a team. Additional Requirements: Background Check Driver's License MVR Drug Testing Salary Ranges and Benefits: 70k-120k DEO ($33/hr-$57/hr) Medical, Dental, Vision 401K with Company Match Paid Training Paid Vacation and Sick Time Company Vehicle Join Our Winning Team Today! If you're an experienced Fire Alarm Technician/Programmer looking for a new challenge, we want to hear from you! Apply now tostart your career and be part of a team that's committed to excellence.

HVAC Repair Technician Why an HVAC Repair Technician career might be right for you: You like solving problems - Each repair is different. You enjoy diagnosing problems and figuring out solutions. You like fixing things - Getting things working again is a satisfying outcome. You did that! You like helping others - You're the hero of the home like a first responder, lifting the weight off the shoulders of grateful homeowners. You like to be on the move - You're not stuck at a desk all day - you are welcomed into customers' homes. Why a career with Sears Home Services is right for you: Great hourly rates - $29 - $33 / hour base rate salary, depending on experience. Benefits - Comprehensive set of medical, dental, and vision benefits, with an additional $4000 annual subsidy for associates with dependents! 401k match - Opportunity to contribute to 401k plan, with 100% company match up to 3%. More ways to earn -Technicians have the opportunity to earn additional performance bonuses & sales incentives throughout the year. Flexible schedules - Sears techs are NOT on call. Year-round work - With Sears large scale and wide product range, Sears cross trains techs and keeps them busy year round. Expert training - Best in class training program. Tens of thousands of repair techs trained by Sears Technical Institute in the past 60 years. We will teach you the skills you need to succeed! Peer mentoring - Onboarding buddy and mentor technicians to help you grow your skills. Career advancement - Many ways to advance and cross-train to keep growing your career. Our average tenure is >12 years! Easy tools - Sears provides company vehicle, uniforms, specialty tools, mobile phone & industry-leading app that eliminates paperwork and provides technical support. Job responsibilities: Repair appliances with high levels of quality and efficiency Deliver delightful customer experience that exceed expectations consistently Provide customers with value-added solutions that help make their home more clean, comfortable & protected Keep company truck well-maintained & organized, and help manage parts efficiently Requirements: High school diploma or general education degree EPA Type II or EPA Universal Mechanical knowledge, including use of testing & repair tools Can follow directions and processes for quality workmanship Can use smartphone, including use for part ordering Background & drug screen Valid driver's license for the state in which you work

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary We offer incentive programs for turning in referral leads and quoting planned service agreements or L&M up to 6% payout of the sale value Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $28-37 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

This position description is subject to change at any time as needed to meet the requirements of the program or company. *Advantor Systems is a wholly-owned subsidiary of V2X, LLC Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Advantor Systems is dedicated to providing the highest quality comprehensive proprietary and integrated solutions to help our U.S. Military and government customers protect critical assets through experience, integrity, hard work and loyalty. Our employees enjoy a competitive benefit package including health medical plans, vision, dental, 401(k) match, educational reimbursement along with a flexible work schedule and extra personal days off. This position is responsible for providing installation services for electronic security systems. This role ensures all work is performed in accordance with Company standards, contract requirements, and applicable laws and regulations, while achieving corporate targets such as revenue, profitability, quality, and customer satisfaction. THIS POSITION REQUIRES TRAVEL 100% OF THE TIME WITHIN AND OUTSIDE OF THE PRIMARY ASSIGNED REGION. The ideal candidate has a willingness and desire to learn installation and maintenance of different technology, systems, and devices related to electronic security Responsibilities Major Job Activities: + Conducts inventory of materials + Cuts, bends, and installs conduit + Demonstrates use of system and provides basic user instructions to customers + Diagnoses and resolves issues with alarm systems and networks + Enters data into various documents, systems, and platforms + Installs low voltage cabling and wiring + Mounts electronic security devices to various surfaces + Connects devices to electronic security panel + Programs the security system utilizing software at the head end + Performs project closeout activities including conducting testing, repairing close-out documents including pulling reports, data entry into documents, and red-lining Design Drawings to reflect the "As Built" condition + Provides status updates and information to internal and external customers + Performs other duties as required and assigned Material & Equipment Directly Used: + Ability to properly utilize required Personal Protective Equipment (PPE) + Ability to read, understand, and follow safety procedures in compliance with Company, Project, Customer, and Occupational Safety and Health Administration (OSHA) requirements + Basic Computer Skills including MS Office (Outlook and Excel), Adobe, Vizio, TeamViewer, and TerraTerm + Basic typing skills to ensure accuracy of data in closeout documents, emails, timecard, and expenses Working Environment: + Willing to work overtime as needed + Willing to travel 100% of the time within and outside of primary assigned region Physical Activities: + Ability to lift 50 Lbs. and maneuver 100 Lbs + Comfortable performing work at heights up to 50 Ft, using a ladder or high lift Qualifications Minimum Qualifications: Education / Certifications: + High School Diploma or equivalent + Two years of post-secondary education, technical school, or work experience in a relevant field + OSHA-10 Safety Certification + Clean Background Check and Acceptable Credit History + Valid Driver's License (Real ID) with Clean Driving Record Experience / Skills: + Working knowledge of circuitry and electrical knowledge, including low voltage electrical + Working knowledge of various communications methods (copper, fiber, network) + Basic familiarity with regulations and standards related to Electronic Security Systems (AR 190-11, AFI 31-101, ESE-SIT-0001, ICD 705, UL 2050, ADA, NFPA 70, NFPA 101) + Basic knowledge of reading design drawings, blueprints, and project plans + Basic troubleshooting and problem-solving skills + Familiar with cable and wire pulling - low voltage electrical cable, CAT6 + Familiar with conduit cutting, bending, and installation + Familiar with mounting devices to various surfaces (drywall, concrete, metal) + Exhibit professional appearance and conduct + Positive, friendly attitude, with strong customer-satisfaction focus + Proficient in the use of hand and power tools + Punctual and reliable attendance + High Lift Safety Certification + Ladder Safety Training At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.

Experienced Low Voltage Technicians needed! Fire Alarm experience with Nevada State F Card is required for this position. Desired candidates will be fluent in Security Alarm Installation and Service, Access Control and CCTV. Those without prior experience need not apply. Qualifications Minimum 3 years experience Clean Background, must be able to obtain Sheriff's Card (Work Card) Clean DMV Additional Information Competitive Salary 401 (k) Medical

Fusion is actively seeking a dedicated Deskside Support - Level 1 to join our dynamic team. In this role, you'll be the go-to expert for deskside support, ensuring our team members have the tools and assistance they need to stay productive and successful. If you're tech-savvy, solutions-oriented, and passionate about providing high-quality support, we'd love to hear from you. What You'll Do Provide support for Windows 11 upgrade initiatives across the organization Perform hardware refreshes in large-scale environments Manage and maintain a service ticket queue with timely updates Respond to support requests within 15 minutes, resolving issues either remotely or in person Communicate clearly with users, keeping them informed throughout the troubleshooting process Resolve software, hardware, printer, and Wi-Fi connectivity issues Maintain accurate documentation for all support cases Recommend improvements to optimize user experience Participate in ongoing technical training and certifications What You Bring 5 years or more years of PC service and support experience Hands-on experience with Microsoft stack and break and fix Strong knowledge of MS Office, Windows 95/NT, XP, and MS Exchange Experience installing drivers and troubleshooting external printers and wireless connectivity Excellent communication and customer service skills Ability to obtain and maintain a Nevada Gaming Control Board Registration (Prefer to already have) Must be legally eligible to work in the U.S. and at least 21 years of age Physical Requirements Ability to navigate all areas of the property, including stairs and various work environments Capable of working in a fast-paced setting while staying calm under pressure Comfortable standing, walking, bending, stretching, and kneeling for extended periods

Job DescriptionSalary: DOE Commercial Fire Protection is seeking experienced Fire Alarm Technicians.There's never been a more exciting time to join our team! We are in an accelerated growth phase in a rapidly expanding industry and are seeking motivated, self-driven individuals looking for a long-term career in the Las Vegasarea. Responsibilities include servicing, inspecting and testing fire alarm systems to the prescribed standards; performing on-site emergency troubleshooting; programming and repairs of our customers fire alarm systems; identifying code and non-conformance issues; and preparing accurate and timely service tickets and reports. Duties may also include the installation of fire alarm systems. Skills/Qualifications: 2+ years of experience in low voltage electrical systems, including Fire Alarm, Intrusion systems, and Access Control High School Diploma or equivalent Experience in reading and interpreting blueprints, submittals, and operational/product manuals Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. Ability to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc. Ability to work flexible hours including weekends to meet customer requirements Demonstrate a high level of customer service, strong organization skills, and positive attitude Maintain truck inventory to ensure timely response to customer needs. Ability to adhere to, implement, and follow safety guidelines and procedures at all times F Card Possess a valid drivers license and driving record that meets company requirements Pass a pre-employment background check Perform other duties as assigned Benefits:Commercial Fire Protection is pleased to offer a compensation package which includes:Competitive hourly rate, medical, dental, vision,401k, life insurance, paid time off and holidays, supportive team environment, laptop, company vehicle, tuition reimbursement, and career advancement opportunities. All qualified applicants to Commercial Fire Protection are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic. Primary LocationUS-NV-Las Vegas

Are you an experienced AV professional who takes pride in precision work and high\-end installations? Join a top\-tier NJ\-based commercial AV firm that partners with luxury retail brands and public spaces to deliver visually stunning, technically sound AV environments. They're hiring a skilled and motivated AV Installation and Service Technician to join their growing team. This is an exciting opportunity to work on elite commercial projects where attention to detail and customer service truly matter. What You'll Do: Install and service AV systems in commercial environments, including LCD displays, Direct View LEDs, speakers, media players, and control systems Provide onsite and remote troubleshooting, diagnosis, and repairs Pull and terminate cabling (HDMI, CAT6, speaker wire, etc.), including conduit work Perform system testing, configuration, software loading, and final tuning Deliver outstanding customer support-both over the phone and in person Maintain accurate documentation and communicate clearly with internal teams and clients What You Bring: 5+ years of hands\-on AV installation and field service experience (commercial projects) Strong troubleshooting and technical skills across a range of AV hardware and systems Familiarity with AV signal flow, control systems, and structured cabling Comfortable working independently in fast\-paced, customer\-facing settings Detail\-oriented, organized, and committed to doing the job right the first time Requirements: Valid driver's license and reliable transportation Must provide your own basic hand tools Able to lift and carry up to 50 lbs Willing to travel locally and occasionally out of town for projects OSHA 30 certification a plus Why Join This Company? Be part of a trusted, growing company with a reputation for delivering premium AV installations Work on exciting, high\-profile projects in luxury retail and public\-facing environments Enjoy a supportive team culture with opportunity for growth Competitive compensation and comprehensive benefits package Salary: Tier 1: 22.00 \- 23.00 per hour Tier 2: 26.00 \-30.00 per hour Salary is commensurate with experience Work Location: Based either in Northern New Jersey or Las Vegas Nevada. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"680081004","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Target Date","uitype":24,"value":"12\/19\/2025"},{"field Label":"Job Opening Status","uitype":2,"value":"Accepting Candidates"},{"field Label":"Work Experience","uitype":2,"value":"5+ years"},{"field Label":"Industry","uitype":2,"value":"Technology"},{"field Label":"Number of Positions","uitype":32,"value":"2"},{"field Label":"City","uitype":1,"value":"Las Vegas"},{"field Label":"State\/Province","uitype":1,"value":"Nevada"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"89101"}],"header Name":"AV Installation & Service Technician\/ Las Vegas, Nevada","widget Id":"502884000000072311","is JobBoard":"false","user Id":"502884000000226552","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"502884000017859085","FontSize":"15","google IndexUrl":"https:\/\/avstaffingsolutions.zohorecruit.com\/recruit\/ViewJob.na?digest=aw6NXs3TF4MfPsdD0JClq4EsG8ih6zGpKTtblI.S0kg\-&embedsource=Google","location":"Las Vegas","embedsource":"CareerSite"}

**Discover a more connected career** At Ervin Cable Construction, LLC, as a Fiber Splicer II, you'll complete the process of fusing optical fibers, to maintain our telecommunication networks.Your splicing work is essential for keeping strong and reliable connections, ensuring data travels seamlessly through our continually growing network. **Connecting you to great benefits** + Weekly Paychecks + Paid Time Off, Parental Leave, and Holidays + Insurance (including medical, prescription drug, dental, vision, disability, life insurance) + 401(k) w/ Company Match + Stock Purchase Plan + Education Reimbursement + Legal Insurance + Discounts on gym memberships, pet insurance, and much more! **What you'll do** + Perform cable upgrades and splicing tasks, both aerial and underground + Test, activate, and troubleshoot the network's circuit post-installation + Ensure all splicing operations meet strict customer and industry standards + Upgrade existing fiber sheaths with new fiber sheaths + Mid-sheath fibers for entry on loose tube or fiber sheaths + Cut away the sheath from existing cables to reach faulty connections, and remove the sheath and insulation from newly installed cables and wires + Provide guidance to other splicers, as needed + Complete basic daily maintenance of vehicles, including fluid checks + Document work performed through daily production reports, including marking up maps and keeping correct material usage records + Other duties as assigned **What you'll need** + To be 18 years of age or older + Authorization to work in the United States for this company + High School Diploma, GED equivalent, or relevant work experience + Valid State driver's license (cannot be considered Provisional), including an acceptable driving record + Must be able to pass a DOT physical exam, resulting in a valid medical card + At least two years of fiber splicing experience Additional qualifications + Certified pole climber or capable of demonstrating proficiency as a pole climber, is preferred + Knowledge of telecommunications network structure **Physical abilities & exposures** + **Routinely:** work at heights, occasional entry into attics and crawl spaces and alone in remote locations, operate vehicle and heavy machinery; squeeze, fine hand motion, bend, stoop, stand, walk, climb stairs, and lift up to 55 pounds without assistance. + **Occasionally** : work in confined spaces, use ladder and gaffs for climbing poles, keyboard and mouse **Why grow your career with us** Your career here is more than just a job - it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. **Building stronger solutions together** Our company is an equal-opportunity employer - we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

This is an entry level Food Safety/Quality Assurance Technician position. Collect ingredient, product, and packaging technical information. Conduct analytical testing to support incoming materials, in-process product, and finished product meets food safety and quality standards. Communicate in a timely and effective manner to Production Team Members, Production Leadership and FSQA Leadership. Note: While this Job Description outlines the responsibilities for Technician Level 1, candidates may also be considered for Tier 2 or Tier 3 roles based on organizational need, prior experience, and demonstrated proficiency in the duties of each level. Compensation details for all tiers are provided in the Benefits and Pay Rate Summary section below. Essential Duties and Requirements include the following. Adhere to personnel safety policies and procedures as well as promote personnel safety to peers. Champion Food Safety and Quality Standards. Promote Human Safety, Food Safety, and Superior Quality Standards throughout the organization. Effectively document food safety and/or quality issues. Communicate expediently to FSQA Supervisor, Production Supervisor, and/or FSQA Manager. Conduct inspection activities both during production and post sanitation. Ensure full compliance to established standards. This includes but is not limited to all Identity Preserved product: Kosher, Organic, Gluten Free, Non-GMO Project Verified, and Halal. Audit production and packaging lines and document information for compliance purposes. Collect and analyze ingredient and product samples for compliance to analytical, physical, chemical, and organoleptic specifications. Audit metal detection and weight control equipment. Record production finished goods and WIP data. Recognize out of specification results and communicate to production in a timely manner. Place non-conforming product on Hold and complete all required documentation. Recognize out of specification results and communicate to appropriate personnel in a timely manner. Responsible for reporting food safety, employee safety and quality issues Performs other duties as assigned. Should an external or internal hire be hired directly into Level I Technician, the expectation is that they complete the Food Safety Professional Certification, Track 1 training within six months of starting the position. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High School Diploma or equivalent are required. Ability to read, write and communicate in English required. Vocation training in Quality Systems is preferred. Work experience in Food Manufacturing or Quality Assurance is preferred. Physical Ability The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and listen or hear. The employee frequently is required to use hands to finger, handle, or feel. The employee is required to stand, walk, and reach with hands and arms. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. The expected base pay rate for this position can be seen below. +$2/HR shift differential for 2nd and 3rd Shift FSQA Technician, level 1: $19.60/hour FSQA Technician, level 2: $22.60/hour FSQA Technician, level 3: $26.60/hour

Mark-Taylor is the region's longest-standing investment manager, developer and owner of Class-A multifamily real estate on behalf of numerous third-party owners. We are proud to be recognized as Ranking Arizona s #1 Multifamily Builder and Manager, a Best Place to Work in the Multifamily Industry, Healthiest Employer by the Phoenix Business Journal, and more. As our portfolio continues to grow, so do our Community Teams! Mark-Taylor is hiring Facilities Technicians (Groundskeepers) at multiple locations throughout the Greater Phoenix Area. If this community is not the right fit for you, our recruiters will talk to you about all of our exceptional career opportunities. As a Facilities Technician, you will work at one of our beautiful communities and represent Mark-Taylor through the delivery of exceptional customer service while contributing to the cleanliness and curb appeal of the grounds and interiors. You're Excited About This Role Because You Will: Maintain cleanliness of community grounds, and work areas throughout the day, practicing clean-as-you-go procedures. Upkeep of grounds, amenities, building exteriors, dumpster areas, parking lots and other community buildings. Remove trash from exterior grounds, trash containers, and vacant apartments prior to make-ready process. Complete opening and closing duties, including property walks and landscaping assessments. Daily, weekly, monthly cleaning and upkeep of pool(s), tot lots, light fixtures, breezeways, amenity areas and BBQ grills. Perform janitorial tasks, including power washing, light exterior painting of speed bumps, curbs etc. Monitor and maintain cleanliness, sanitation, and organization of community grounds. We're Excited to Meet You! Ideally, You Will Bring: High School Diploma, GED, or equivalent Willingness to work cohesively as a part of a team Ability to interact positively and courteously with team members and residents Prior experience working as groundskeeper, landscaper, porter, or related position is especially desirable. A basic understanding of written and verbal English. Why You ll Love Working at Mark-Taylor: Opportunities for career growth Employee referral program Paid time off, paid sick time, paid holidays, paid volunteer time Medical, dental, vision benefits, including paid parental leave 401k with company match Employee appreciation events MT Wellness program Access to all Mark-Taylor Residential amenities (including our resort-style pools and fitness centers) Mark-Taylor is an equal opportunity employer and a drug-free workplace. All of our employees undergo pre-employment screening which includes drug testing. The starting hourly pay range for Facilities Technician is $19.00, commensurate with experience and dependent on the specific community's level of complexity. Our Facilities Technicians typically work a schedule that includes one or both weekend days.

ocated just minutes away from all of the excitement of the glittering Las Vegas Strip and Las Vegas Convention Center, Tuscany Suites & Casino provides guests with a relaxing getaway perfect for business travelers, a long weekend with friends or your next family vacation. We are looking for a Full-Time experienced HVAC / MECHANICAL TECHNICIAN ESSENTIAL DUTIES & RESPONSIBILITIES Ensure that all refrigerant is recovered and logged according to the EPA certification. Must maintain a Universal Certification. Ensure that the hot works permit requirements are followed. Ensure that all HVAC & R equipment is having the preventive maintenance done according to manufactures or health department requirements. Ensure that onsite HVAC & R parts are stocked for the necessary repairs. Ensure that if preventive maintenance or repairs to any HVAC & R equipment that gets completed that all areas are cleaned and disposed of. Ensure that the logging of equipment data, equipment repairs, and refrigerant usage are maintained. Ensure that tools and instruments used for repairs of the HVAC & R equipment are in good working order or even sent out for testing if required. Ensure that OSHA requirements are followed for the safety when working by oneself, working around other employees and around our guest using public areas. Ensure that the proper safety equipment is used when working around HVAC & R equipment or the use of tools. Ensure that there is minimal loss of efficiency all parts and tools needed for the repairs are taken all at the same time to do the job. Responsible for the tools to be returned in its rightful place. Ensure to maintain MSDS sheets for any liquids, chemicals, or powder products use in the HVAC & R department. Ensure that the Tuscany Suites & Casino employee handbook is followed in its entirety. Ensure that at times you will be required to step outside this job description and do other job duties assigned by management. Ensure that a purchase order is written for every part or supply needed after the approval of Assistant, Director of Engineering Ensure that the daily or weekly checklist is followed it is entirety. Scheduled shift may be altered at any time to do the projects or repairs not affecting the operations of the Hotel or Casino. Must be able to work varied shifts, including nights, weekends, and holidays. Must be able to carry 50 lbs. EDUCATION & EXPERIENCE High school diploma or GED required. Must have 2 years' experience in commercial HVAC Refrigeration and Kitchen equipment. Required to carry a universal EPA card. This is a full-time position and must be flexible to work on any given shifts. Must be able to work in an environment with exposure to secondhand smoke and high noise levels. Maintain composure under pressure and consistently meet deadlines with internal and external customers and contacts. Ability to interact appropriately and effectively with guests, management, other team members, and outside contacts. Ability for prolonged periods of time to walk, stand, stretch, bend, and kneel. Work in a fast-paced and busy environment. Work indoors and outdoors be exposed to various environmental factors.

This position description is subject to change at any time as needed to meet the requirements of the program or company. *Advantor Systems is a wholly-owned subsidiary of V2X, LLC Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Advantor Systems is dedicated to providing the highest quality comprehensive proprietary and integrated solutions to help our U.S. Military and government customers protect critical assets through experience, integrity, hard work and loyalty. Our employees enjoy a competitive benefit package including health medical plans, vision, dental, 401(k) match, educational reimbursement along with a flexible work schedule and extra personal days off. This position is responsible for providing installation services for electronic security systems. This role ensures all work is performed in accordance with Company standards, contract requirements, and applicable laws and regulations, while achieving corporate targets such as revenue, profitability, quality, and customer satisfaction. THIS POSITION REQUIRES TRAVEL 100% OF THE TIME WITHIN AND OUTSIDE OF THE PRIMARY ASSIGNED REGION. The ideal candidate has a willingness and desire to learn installation and maintenance of different technology, systems, and devices related to electronic security Responsibilities Major Job Activities: + Conducts inventory of materials + Cuts, bends, and installs conduit + Demonstrates use of system and provides basic user instructions to customers + Diagnoses and resolves issues with alarm systems and networks + Enters data into various documents, systems, and platforms + Installs low voltage cabling and wiring + Mounts electronic security devices to various surfaces + Connects devices to electronic security panel + Programs the security system utilizing software at the head end + Performs project closeout activities including conducting testing, repairing close-out documents including pulling reports, data entry into documents, and red-lining Design Drawings to reflect the "As Built" condition + Provides status updates and information to internal and external customers + Performs other duties as required and assigned Material & Equipment Directly Used: + Ability to properly utilize required Personal Protective Equipment (PPE) + Ability to read, understand, and follow safety procedures in compliance with Company, Project, Customer, and Occupational Safety and Health Administration (OSHA) requirements + Basic Computer Skills including MS Office (Outlook and Excel), Adobe, Vizio, TeamViewer, and TerraTerm + Basic typing skills to ensure accuracy of data in closeout documents, emails, timecard, and expenses Working Environment: + Willing to work overtime as needed + Willing to travel 100% of the time within and outside of primary assigned region Physical Activities: + Ability to lift 50 Lbs. and maneuver 100 Lbs + Comfortable performing work at heights up to 50 Ft, using a ladder or high lift Qualifications Minimum Qualifications: Education / Certifications: + High School Diploma or equivalent + Two years of post-secondary education, technical school, or work experience in a relevant field + OSHA-10 Safety Certification + Clean Background Check and Acceptable Credit History + Valid Driver's License (Real ID) with Clean Driving Record Experience / Skills: + Working knowledge of circuitry and electrical knowledge, including low voltage electrical + Working knowledge of various communications methods (copper, fiber, network) + Basic familiarity with regulations and standards related to Electronic Security Systems (AR 190-11, AFI 31-101, ESE-SIT-0001, ICD 705, UL 2050, ADA, NFPA 70, NFPA 101) + Basic knowledge of reading design drawings, blueprints, and project plans + Basic troubleshooting and problem-solving skills + Familiar with cable and wire pulling - low voltage electrical cable, CAT6 + Familiar with conduit cutting, bending, and installation + Familiar with mounting devices to various surfaces (drywall, concrete, metal) + Exhibit professional appearance and conduct + Positive, friendly attitude, with strong customer-satisfaction focus + Proficient in the use of hand and power tools + Punctual and reliable attendance + High Lift Safety Certification + Ladder Safety Training At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.