Installation technician jobs in Missouri City, TX - 1,812 jobs

Based in Houston, Taurus Industrial Group (Taurus) is a leading, integrated and industry-diversified technical services company offering end-to-end services across multiple service lines. Leveraging a growing footprint with operations in the U.S., Canada, and Mexico, Taurus's service offerings cover engineering and automation, electrical and instrumentation, power systems testing and commissioning, civil and mechanical crafts, pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service soft crafts, insulation and scaffold, specialty tooling and machining, technical bolting, heat treating, hot-tapping, line stopping and NDT / inspections. With over 60 years of continuous, safe, and reliable operating experience, Taurus operates across multiple industries and sectors, providing front-end engineering, routine maintenance, capital projects, and turnaround services. We service multiple areas of the energy industry, from our origins in traditional petrochemical and refining industries to the broader power, natural gas, midstream, industrials, and the emerging renewables market. About the Role: Summary The Field Service Technician performs a variety of tasks, including but not limited to, onsite bolting, heat treating and/or field machining. Completes any and all tasks assigned by the Field Supervisor to meet goals of increased efficiency, profitability, and customer satisfaction. Ideal candidates will have experience with construction or mechanical work and/or possess knowledge of plant maintenance and repair work. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications Experience in mechanical bolting, heat treating, or field machining preferred. Experience performing maintenance and turnaround services to refining, chemical, midstream, and power. High School Graduate or General Education Degree (GED) preferred. Possess a current TWIC card or have the ability to obtain one. Valid driver license with a clear driving record Demonstrated mechanical ability. Must be able travel a minimum of 75% of the time. Knowledge, Skills and Abilities Ability to pass a non-DOT medical exam, drug and alcohol test, respirator qualification test, and federal class background check. Ability to work at heights or in enclosed spaces. Accuracy - Ability to perform work accurately and thoroughly. Detail Oriented - Ability to pay attention to the details of a project or task. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Working under pressure - ability to complete assigned tasks under stressful situations and adapt to changing assignments on short notice. Accountability - Ability to accept responsibility and account for his/her actions. Essential Functions Perform onsite bolting, heat treating or field machining work at customer locations. Troubleshoot onsite equipment and determine the proper methods fulfill customer's needs and specific applications. Operate a variety of tools for field work. Properly document and/or record work performed utilizing required internal and customer job-related forms/paperwork. Keep a clean and safe working environment and optimize space utilization. Communicate and cooperate with supervisors and coworkers. Meet and communicate with customers in a professional manner. Operate and preventively maintain company tools, equipment, and vehicles. Follow quality service standards and comply with procedures, rules, and regulations. Work in accordance with all safety regulations Other duties as assigned Physical Demands Must be able to stand and walk for much of the day. Ability to lift 5-25 pounds frequently and ability to lift, up to, 50 pounds occasionally. Work Environment Is frequently exposed to variable weather conditions. Other conditions may include proximity to forklifts or other heavy machinery and using various tools and hardware. Worker is subject to frequent heavy lifting. BE SURE TO APPLY ON OUR WEBSITE: ****************

Topa Group is partnered with a Fire & Security Integrator in Houston, TX. We are hiring two expert Service Technicians for our Houston operations. This senior-level role requires a minimum of 5 years of experience in the fire and security industry. Key Responsibilities Troubleshoot, repair, and maintain Fire Alarm Systems and Access Control infrastructure. Configure and optimize Network (IP) Cameras and surveillance software. Ensure all work meets NFPA-72 standards and local fire codes. Requirements: Experience: 5+ years as a Service Technician. Licensing: Must hold a valid Texas Fire Alarm License (FAL). Expertise: Advanced knowledge of alarm panels, readers, and network video. Reliability: Valid driver's license and clean background.

Hi, Greetings Hope you are doing great! I would like to update you on an urgent open position with our esteemed client. Please go through the Job Description. Send me your updated resume and expected rate for the below position. Role: Technology Lead - Cable MSO Service Duration: Full TIme Location: Houston, TX Basic Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 5+ years of experience in production support with Cable MSO service offerings • Experience in leading team • Experience in Production Operations Support in Video domain • Strong Knowledge of STB and Video Domain - Docsis knowledge will be a huge advantage • Experience in Cable and telecom domain, understanding of Cable MSO operations • Very strong analytical and reporting skills • Ability to perform complex work requiring broad technical knowledge •Excellent communication skills and client interfacing skills • Experience and desire to work in a Global delivery environment Qualifications Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Training/Base pay rate of $19.00 per hour. The Base rate increases by .50 upon completion of training. We have a Guaranteed Hourly Rate of $23.00 per hour upon completion of training through your first 9 months. This allows time to build your bonus and commission skills. If your post-training base rate, plus bonuses and commission don't bring you to the Guaranteed Hourly Rate, we will increase your pay. However, the earning potential is much higher! Schedule: 2 days off during the week; during slower season enjoy a four-on, three-off schedule. Bonus Opportunity: Earn a Trained and Active Bonus of $1500.00, paid in two installments: $750.00 at 60 days of employment and $750.00 at 6 months. About Us: At Southern Star, we are the driving fulfillment force behind award-winning DISH TV, cutting edge Starlink Satellite Internet and innovative home entertainment and security products. As a Southern Star technician, you will be more than a service provider; you will be a technology ambassador, enhancing the way customers interact with technology. Compensation: Base Pay and Commissions: Start with a competitive hourly rate and earn commissions. Performance Incentives: Boost your earnings with performance bonuses. First-Year Potential: Earn between $50,000 - $60,000 or more in your first year. Experienced Technicians: Earn between $60,000 - $85,000+ annually. Training and Growth: Paid Training: Comprehensive training to ensure your success. Support: Continuous support to help you achieve your career goals. Benefits: Insurance: Comprehensive insurance benefits. Retirement: 401K plans. Paid Time Off: Generous paid time off. Life Insurance: Company paid $25,000 life insurance policy. Company Vehicle: Provided upon completion of training. Device Plan: Monthly stipend for using your own smartphone. Employee Discounts: Exclusive discounts through LifeMart, including home mortgage lender savings. Role Requirements: Technical Skills: Strong technical knowledge and the ability to scale ladders up to 38 ft and navigate crawl spaces. Travel: Willingness to travel up to 20% of the time (lodging and per diem covered by SSI). Communication: Excellent communication and customer service skills. Sales: Successfully upsell products and services to customers while installing DISH systems. Time Management: Effective time management skills. Must have a clear Background, Drug Screen and Motor Vehicle Record Join Us: Become a part of Southern Star and transform the way customers experience home entertainment. Apply today and unlock your potential! #INSSMST #ZR

Contracted Employee - PEIMS Reportable/Contracted Employee - PEIMS Reportable Additional Information: Show/Hide Only for Contracted Employee - PEIMS Reportable ONLY SELECT JOB ID 1927 This form collects the information needed to enter a PEIMS-reportable contracted service provider into the district ERP system for assignment of a district email account, access to necessary applications and programs, campus location badge access, and other required resources. The service provider performs services in support of district operations or student programs as outlined in an approved contract and works under district or campus supervision. Please complete all fields accurately and submit electronically to Human Resources for system entry and access setup. Attachment(s): * Contractor Form Instructions.pdf

Make your mark at the world's largest HVAC company Daikin Applied is seeking a full-time Controls Technician III. In this role, you will be responsible for installation, programming, and service of commercial building digital control systems. These responsibilities will increase based on exposure to tasks, ability to develop troubleshooting skill set, and consistent and accurate completion of assignments. The Building Automation Systems (BAS) you will be installing and servicing includes but is not limited to Daikin branded controls or third-party controls system. Come be a part of an exciting journey at Daikin Applied, where innovation and excellence drive our every endeavor! Location: Houston, TX- Onsite What you will do: Provide responsive and professional customer service with the goal of building and maintaining long-term customer relationships Identify, analyze, diagnose, and troubleshoot direct digital control systems Perform preventative maintenance, commissioning, and replacement modifications as needed or requested by customers Maintain building automation systems by inspecting trend logs, reports, schedules, applications, hardware, and programming Provide controls technical support to HVAC technicians Train and mentor less experienced technicians Create and/or implement programming and graphics for new installations and retrofit projects Commission controls installations and verify that control sequences meet scope, design, or specifications Record and report billing, inventory, timecards, technician tip reports, and other articles as required and in a timely manner Interact and train customers by offering status reports of service before, during, and after each call and explain technical information to both technical and non-technical audiences Participate in available training through regional technician trainers, off-site learning modules, and Daikin Learning. Maintain all required certifications and continue to develop new skill sets Ensure standards, policies, procedures, and maintenance of a clean work area are always upheld Follow all OSHA and Daikin Applied safety policies and procedures What's in it for you: Factory Certified Training, Online Training Courses, or other professional on the job training in the Building Automation and HVAC Industry The opportunity to work on all types of Building Automation Systems and cutting-edge technologies such as Intelligent Equipment Daikin Applied provides technicians with company vehicle, laptops, mobile devices, and other technologies The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best The opportunity to work for a leading innovator in HVAC and Building Automation where you can make a difference in environmental initiatives to create a more sustainable world for all Minimum Qualifications: High School Diploma or GED Technical training and 5+ years of equivalent combination of education and experience Valid Driver's License and acceptable driving record Rotational Emergency Call Support as required Required license(s) and/or training card as required by local law district Work visa sponsorship is not available for this position Preferred Qualifications: Experience in BAS, HVAC, or related industry Proficiency with test instruments and calibration tools Competency in operation of engineering/commissioning tools, DDC controllers and field devices, BACnet protocol fundamentals Competency in the operation of HVAC equipment and controls Ability to read low voltage wiring diagrams and controls flow diagrams Niagara AX and/or Niagara 4 certification Experience with any common integration protocols such as: BACnet MST / IP, LON, Modbus TCP / RTU, Ethernet OIP, MQTT, or SQL Strong computer skills, including computer networking fundamentals OSHA 10 within 90 days of hire (Daikin provides this training during onboarding process) Current first aid / CPR card Benefits: Daikin Applied offers the following benefits for this position, subject to applicable eligibility requirements Multiple medical insurance plan options + dental and vision insurance 401K retirement plan with employer match Paid time off and company paid holidays Paid sick time in accordance with the federal, state and local law Tuition Reimbursement after 6 months of continuous service The typical hourly pay rate for this position ranges from $35.40 - $55.30 in Texas. Individual base pay will depend on a wide range of factors including your skills, qualifications, experience, and location. If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

We are seeking a highly skilled and motivated **Technical Lead** to oversee the implementation phase, support activities, and continuous improvement of our **Valve Condition Monitoring (VCM)** data collection models. This strategic global and hands-on role is responsible for supporting global teams, sustaining existing service contracts, and leading the development and deployment of secure data collection solutions. This role is critical to ensuring the successful implementation and long-term reliability of VCM services across diverse industrial environments. **Key Responsibilities:** **1. Technical Support for Global Opportunities** + Serve as the technical authority for VCM technologies to provide expert technical guidance to world area teams pursuing new VCM opportunities. + Assist in solution design, proposal development, and customer presentations to ensure alignment with service capabilities and customer needs. + Act as a technical liaison between regional teams and central engineering, software development, and support resources. + Ensure compliance with industry standards and internal quality protocols during service implementation. **2. Service Sustainment & Troubleshooting** + Act as the primary technical contact for world area VCM teams, providing expert guidance, troubleshooting, and resolution of VCM-related issues. + Diagnose and resolve technical issues affecting existing VCM contracts to maintain service continuity and performance. + Lead root cause analysis and corrective actions for system failures, data collection anomalies, or connectivity issues. + Collaborate with field service and support teams across various Emerson groups to ensure timely resolution and customer satisfaction. + Conduct training sessions and workshops for world area VCM teams on systems configurations and maintenance best practices. + Translate complex technical findings into actionable insights for world area VCM teams, enhancing operational excellence. + Develop and maintain documentation, including service manuals, troubleshooting guides, Functional Design Specifications, and FAQs. + Identify recurring issues and lead root cause analysis efforts to implement long-term solutions. **3. Development & Deployment of Online Data Collection Solutions** + Lead the review, design, and implementation of secure online data collection models using Purdue Enterprise Reference Architecture (PERA) and Data Diode solutions for Industrial Control Systems. + Work closely with cybersecurity, IT, and engineering teams to ensure compliance with data protection standards and operational integrity. + Drive innovation in remote monitoring capabilities to enhance service scalability and responsiveness. **4. Ownership of VCM Implementation Process** + Define, document, and continuously improve the end-to-end VCM implementation process. + Ensure consistent execution across projects, including planning, installation, commissioning, and validation. + Develop and/or recommend tools, training materials, process guides, and best practices to support global deployment teams. **Qualifications, Experience & Skills:** **Required Qualifications** + **Education:** Bachelor's degree in Electrical, Mechanical, Controls/Instrumentation, Computer/Electrical Engineering, or related field; or equivalent practical experience. + **5 Yr experience in IT/OT systems** for industrial and enterprise environments, including networking, credential management, domain services, and application integration. + **OT Networking & ICS Security:** Experience with secure data architectures, including Purdue Model zones/levels, firewalls/jump servers, secure remote access, data diodes/unidirectional gateways, and segmented architectures in plant environments. + Familiarity with industrial plants architectures, control systems, asset management platforms, and IIoT technologies. + **Troubleshooting & Sustainment:** Proven experience in customer-facing technical role, root cause analysis ( **RCA)** process, diagnosing **anomalies** , **connectivity issues** , and **system failures** across field devices and control network. + **Cross‑functional leadership:** Experience acting as a **technical authority/liaison** across regional teams, central engineering, and customer stakeholders; able to run workshops and **deliver training** . + Strong communication, presentation, and interpersonal skills, with ability to lead colleagues by influence (often virtually), and comfortably engage with customers at decision-making levels. + Analytical thinker with excellent project management and prioritization skills; well-organized and detail oriented. + **Documentation & Process:** Able to **define, document, and continuously improve** implementation processes, create **service manuals & troubleshooting guides** , and maintain high-quality knowledge base content. + Excels at self-managing workload and executing multiple concurrent projects to meet deadlines. + Ability to effectively interact with all levels of the organization to meet milestones. **Preferred Qualifications** + **Experience in** **industrial automation** or **asset management/condition monitoring** , including commissioning, support, and troubleshooting of instrumentation or control systems in process industries. + **Instrumentation:** Hands-on with control valves, positioners/digital valve controllers, instrumentation protocols (HART/FOUNDATION Fieldbus/Modbus). + Good understanding of **predictive maintenance** and valve diagnostics technologies. + **Instrumentation:** Experience with Emerson DVCs, ValveLink software, Asset Management Systems, smart instrumentation; calibration and loop checks. + **Cybersecurity:** Familiarity with **IEC/ISA 62443** standard and **NIST SP 800‑82** guide. + **End-to-end solution implementations:** Designed and deployed secure architectures from field device/positioner → control network → historian/cloud → analytics. + **Cyber-OT collaboration:** Worked with **cybersecurity/IT/engineering** to meet **policy/standard requirements** , including segmentation, hardening, logging, and remote access governance; successfully integrated **data diodes** without impacting operations. **Our Culture & Commitment to You:** + At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. + We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. \#LI-AN1 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25030295 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

We are looking for a Field Service Installer who installs, sets, and starts up commercial laundry equipment in the South Texas region based out of either of our hub cities of Houston, San Antonio, or Austin to join our team. This would be a Level 2. Schedule: 8 hour shift, Monday to Friday with overtime available We offer an excellent benefits package including: Medical, Dental, and Vision Insurance Life Insurance Paid Vacation Company Vehicle 401K Plan + Match Profit Sharing Plan Factory Training Equal Opportunity Employer Opportunities for Advancement Job Requirements: Experience with installing industrial equipment. Knowledge of plumbing, air, steam and interconnections on machines. Knowledge of offloading, rigging, and hauling industrial equipment. Must have some experience with industrial laundry equipment. Provides support in areas of fabrication, assembly, cutting, pipe fitting, and machining. Read and interpret hydraulic, pneumatic, and electrical schematic and drawings. Work from oral and written instructions. Understand and use manuals and catalogs when ordering parts or installing equipment. Understand and comply with all parts ordering and issuing procedures. Maintains adherence to company policy, safety standards, and good housekeeping practices. Assumes other duties as assigned by supervisor. Maintain a good inventory of parts on assigned service vehicle. Must own appropriate hand tools for the trade. Must have some experience using a flat bed trailer Must have a valid driver's license with a clean driving record. The Most Important Activities Performed: Offloads and installs industrial equipment equipment in a production environment. Troubleshooting commercial laundry systems equipment using schematics and prior technical knowledge Troubleshoot and or repair electrical, hydraulic, pneumatic and mechanical components Work from oral and written instructions Travel is required for this job Physical Requirements: Requires ability to work off ladders, scaffolding and scissors lifts. Requires ability to handle industrial machines safely and efficiently. Requires ability to do extended amounts of walking, moving equipment and tools. Minimum Qualifications Required (EDUCATION/EXPERIENCE/KNOWLEDGE/SKILLS): Prior experience in a production environment Knowledge of manufacturing processes Experience with pneumatic machinery is a plus, mechanical skills Able to lift objects up to 50 lbs. Ability to operate forklifts and other equipment High school graduate or equivalent Valid Driver's License with clean driving record (Required) Must have prior experience working with industrial Washers, Dryers, and installing stated equipment Must have additional training in mechanical or electrical technology About Us: Pellerin is one of the largest sales and service companies for commercial laundry and finishing equipment in the country. We provide pre-sales engineering, installation, start up, operator training, parts and service to our customers. Milnor, Chicago Dryer Company, and American Dryer Company are just a few of the brands we service and sell. We are proud to say that we kept all of employees throughout the pandemic -- we did not reduce pay. We kept everyone at full pay for a guaranteed 40 hours a week, and we still paid a profit share over 20% for 2020! The company is approaching 100 years of continuous operation. We believe in promotion from within. Upward mobility is possible here. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Why Join our Team? At Vallen, we embrace what makes us unique. We thrive on the diversity of our associates and the different ways each of us contributes to Vallen's success. We pride ourselves on being an inclusive company that values the growth of our associates. When you join Vallen, you become part of our winning team. Our vast network of connections is here to help you transform your job into a career. Vallen is an industry leader in delivering flexible supply chain solutions while creating value for our customers, our supply partners, and our associates. Your Benefits at Vallen: * Medical, Dental, Vision * Paid time off (vacation, holidays, sick days) * 401K with discretionary company match - (US positions only) * Employer-paid Basic Life for Employee, Spouse, and Dependents * Employer-paid Short-Term and Long-Term Disability * Health Care and Dependent Care Flexible Spending Accounts * Vitality Wellness Program * Employee Assistance Program * Employee Resource Groups for networking and team building * Tuition Reimbursement Program * Employee Referral Program * Safety Shoe and Safety Glasses reimbursement * Employee Discounts through BenefitHub * Advancement Opportunity. Position Summary: Put your maintenance and repair skills to good use at Vallen as a Lead Service Technician focused on Life Safety Services in the Vallen Safety Services Group. In this position, you will install and/or inspect, test, and maintain (ITM) life safety systems and equipment for established customers on a scheduled basis. Essential Job Duties and Responsibilities: * Provide quality of service to our customers. Assist assigned HTS technicians with proper training in Vallen standard operating procedures. * Providing customer service in the area of installation and/or ITM of Life Safety Systems. Including, but not limited to: Fire Extinguishers, Fire Alarm and Detection Systems, Gas Detection Systems, Foam Systems, Dry Chemical Systems, Clean Agent Systems, Special Hazard Systems and Water Based Systems. * May also have job coordination responsibilities in the absence of a Technician Lead if assigned by the supervisor/manager for specific jobs or customers. * May lead other technicians within area of expertise. * May be responsible for interacting with the customers to coordinate job activities. * Responsible for ensuring all documentation associated with assigned tasks is filled out accurately, completely & turned in for proper invoicing. * Ensures all required copies provided to the customer upon servicing equipment. * Knowledgeable of all regulatory standards pertaining to assigned duties, i.e., State, OSHA, and NFPA regulations, etc. * May be responsible for Parts & Equipment requests for specific assigned jobs. * Maintaining accurate inventories related to job and maintenance orders. * Always exhibit safe work practices. * Assist shipping and receiving, unloading trucks, checking in merchandise, matching purchase orders to sales orders & distributing to sales associates for processing. * May include the use of company provided assets such as but not limited to: Company Vehicle, Inventory, Safety Equipment, Laptop, BR Scanner, Test Equipment, Tools, Radio, Cell Phone, Fuel Card and/or Credit Card. * Associates are required to maintain proper care of all assets as defined by Vallen policies. * May have immediate supervision over a tech service unit. Job Qualifications: * High School or GED * Minimum 3 Certification (manufacturing/state) in a fire protection related field * NICET II or greater * Fire Alarm & Ext A 2-4 years' experience or * WBS Construction 2-4 years' experience (Industry related) * RME-I (if applicable) * Mechanically inclined * Advance communication, initiative, and problem-solving skills * Specific -- RELEVENT experience * Experience in the installation and/or maintenance, repair and service of Life Safety Systems and equipment is required. * Advance industry segment knowledge. * Maintain minimum productivity of 95% within 60 days. * Demonstrated ability to successfully manage a Customer Acct or Project. * Ability to repair and service equipment sold by Vallen. * Current Motor Vehicle License with good driving record. * Commercial Driver's License required if carrying loads of hazardous materials. * Proficient with hand tools. * Able to complete repairs and maintenance of equipment in a timely and accurate manner * Able to provide assistance, advise and training to Vallen associates and plant personnel. * Assist warehouse personnel with order fulfillment if needed. * Keep all certifications and licenses current and renewed by completing continuing education as required. * Must pass Drug & Alcohol screen, Physical exam, and background check. Work Environment & Physical Demands: Reasonable accommodations will be evaluated and may be implemented to enable individuals with disabilities to perform essential functions of this position. * Working conditions will vary with service work being performed indoors and out in the field. * Possibility of working in hazardous environments when working within a plant which would require safety precautions and appropriate equipment. * Ability to work in climatic weather (cold/heat) during day or night operations. * While performing the duties of this job, the employee is regularly required to talk and hear. * Occasional lifting of items weighting a maximum of 55 lbs. * Ability to climb stairwells up to 15 levels high. * Ability to ascend and descend ladders (step, extension, cage) up to 24' high. * Able to walk at a normal pace for up to 15 continuous minutes. * Able to work from a standing position for 8-10 hours. * Bending, climbing, and stooping as needed for access of equipment to repair and service. * Pass all test requirements to be approved to work offshore. (If Applicable) Stay up to date with Vallen, and follow us on LinkedIn, Facebook and Twitter. Equal Opportunity Employer - Ethnically and Culturally Diverse/Females/Veterans/Disabled/Sexual Orientation/Gender Identity

Benefits: Competitive salary Flexible schedule Free uniforms Role: Lead Home Service Technician / Handyman We provide: Year-round stable, steady work Regular work hours Flexible scheduling Company van and cover related expenses such as gas, oil changes, etc. *varies by location. TruBlue t-shirts, polos, and other company gear for the team Strong office support Trublue of Kingwood is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance. We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. We want to hear from you if you have 10 or more years of paid experience in general carpentry and handyman work. We are looking for a seasoned Team Leader with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US and speak fluent English. We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office."

The Splicer is responsible for the terminating, splicing, bonding/grounding, installing CPE into customer house, documenting, and testing of all fiber optic cables within the systems fiber optic networks and their related equipment with the end goal of providing maximum operating efficiency. RESPONSIBILITIES/ESSENTIAL FUNCTIONS: 1. This position will consist of FTTH daytime, but possibility of some night work. 2. Fusion splice, terminate and install assortment of fiber optic connectors and enclosures including both loose tube fiber and ribbon fiber up to an 288ct fiber cable. 3. Construct a splice case, including but not limited to bounding, slack storage and sealing. 4. Must know the fiber optic color code system (Must be able to discern colors). 5. Prepare and maintain splicing records, schematics and diagrams. 6. Proficient in using fiber tools and fiber optic test equipment including traffic meters, fusion splicer, power meter, VFL and OTDR. 7. Troubleshoot damaged fiber, effectively and efficiently. 8. Install and maintain CPE local area networks (LAN) and WiFi networks 9. Install and maintain network interface devices (NID) and Optical Network Terminals (ONT) 10. Perform skilled troubleshooting from the MDF to the demarcation point including CPE 11. Respond to trouble tickets within acceptable company timeframe standards 12. Perform routine preventive maintenance and major repairs to distribution systems 13. Locate buried copper and fiber optic cabling 14. Record and report all record changes immediately 15. Ensure that both he/she and all employees comply with proper safety standards/ procedures and work practices according to OSHA standards, Future Infrastructure and/or the customer, whichever standard is higher. 16. Able to participate in on-call rotation 24/7/365 and work overtime with/without prior notice. 17. Must be able to read, understand and update splice documentation and maps as required REQUIRED QUALIFICATIONS: Education/Experience: • High School Diploma or General Education Degree (GED) • At least 2 years of experience with Fiber Terminations, Fusion Splicing and Testing in an ISP and OSP environment. • OTDR Testing and Trace Analysis. • Power Meter Testing. • Ideal candidate should also have experience as a fiber optic technician, fiber optic splicer, construction with fiber optic background, or fiber optic telecommunications. • Clean & Valid Driver's License. Knowledge, Skills, and Abilities: • Effective communication skills, as required in responding to customer questions and complaints. • Clean & Valid Driver's License • Ability to travel up to 75% of the time throughout Austin, Dallas, Houston, and San Antonio. • Organized and attentive to detail with the ability to multi-task. • Proficiency in the use of a computer, and software applications including Microsoft Office. • Solid interpersonal skills - outgoing, positive, and user-friendly. • Ability to work on multiple projects simultaneously. Preferred Qualifications: • Prefer related experience in a start up environment. • Prefer related work experience in a Fiber Optic installation operation position. Physical Demands / Work Environment: • Job requires employee to stand on his/her feet for extended periods of time, climb ladders, walk considerable distances on worksite, lift objects up to 50 lbs, pulling, pushing, carrying, grasping, reaching, stooping, and crouching. • Work is performed outside with the exposure of weather extremes such as but not limited to, heat, rain, and cold. • The noise level in the work environment is usually moderate to excessive due to high traffic areas and/or areas of construction. Why Should I Apply? Base pay + Bonus Great benefits Generous PTO Policy 10 Company Paid Holidays 401K with 5% matching

HVAC Controls Technician Salary: $65,000 - $75,000 per year We are seeking a skilled and experienced HVAC Controls Technician to join our team. The ideal candidate will possess a strong background in troubleshooting, repairing, and installing direct digital control (DDC) systems, with a deep understanding of HVAC mechanical systems and electronics. Key Responsibilities: Troubleshoot, repair, and install DDC systems to ensure optimal performance. Provide engineering support for new construction projects and retrofits. Modify and optimize program algorithms for DDC systems. Collaborate effectively with sales teams, contractors, and customers to deliver control solutions and service support. Design and implement user-friendly front-end graphics for system interfaces. Analyze issues, diagnose problems, and resolve system malfunctions to maintain the functionality of automation systems. Coordinate and conduct training sessions for customers. Ensure timely completion of all assigned projects. Offer technical guidance and support to end-users and team members as needed. Qualifications: Completion of a vocational school program or an associate degree in electronics, mechanical systems, computer technology, or air conditioning; or a minimum of five years of relevant industry experience. Flexibility to work overtime and weekends, as required. Proficient in reading and interpreting wiring diagrams. Strong written and verbal communication skills. General understanding of IP networks. Occasional travel may be required. Familiarity with a variety of hand and power tools. Experience Requirements: At least 3 years of experience with LonWorks and/or BACnet Control Systems. Experience with ABB Cylone, Honeywell, Distech, JCI FX, TRIDIUM, and NIAGARA 4 is advantageous. Benefits: We offer a comprehensive benefits package, including: Competitive salary ranging from $65,000 to $75,000 per year. Paid vacation. Health, dental, and vision insurance. Short-term, long-term disability, and life insurance (STD/LTD/Life/AD&D). 401(k) retirement plan. Opportunities for continued education and professional development. Excellent career advancement potential. Emphasis on work-life balance. A supportive and collaborative company culture.

Job DescriptionDescription: Commercial Field Installer We are seeking reliable and hardworking individuals to join our team as Commercial Field Installer. In this role, you will be responsible for the safe and efficient installation, dismantling, and maintenance of large-scale commercial tents and temporary structures for events, projects, and field operations. This position requires physical stamina, attention to detail, and the ability to work in a team-oriented environment. This opportunity is available to due to company growth and expansion. Key Responsibilities • Load, transport, and unload tent equipment and materials to and from job sites. • Safely erect and dismantle commercial tents, staging, flooring, and related structures. • Secure tents to withstand environmental conditions such as wind and rain. • Assist with site preparation, layout, and alignment of structures according to project requirements. • Inspect materials and equipment for damage or wear, reporting issues to supervisors. • Maintain a clean and organized work environment on-site and in storage facilities. • Adhere to all safety protocols, client regulations, and company standards during installation and removal. • Communicate effectively with crew members, supervisors, and clients. Work Environment • Outdoor job sites in all weather conditions, including refineries, plants, ports, and industrial facilities. • Fast-paced, hands-on, team-oriented environment. • May require extended travel or overnight stays depending on project scope. Compensation & Benefits • Competitive hourly wage with overtime. • Training and advancement opportunities. • Travel allowances. Requirements: Qualifications • Prior experience in tent installation, construction, or related field preferred but not required (training provided). • Ability to lift 50-100 lbs. and perform physically demanding tasks in varying weather conditions. • Basic knowledge of hand tools, power tools, and rigging equipment. • Strong teamwork and problem-solving skills. • Willingness to travel and work flexible hours, including evenings, weekends, and holidays. • Valid driver's license and reliable transportation preferred. Compliance & Certifications • Must hold or be able to obtain a TWIC (Transportation Worker Identification Credential) card. • Must be able to pass DISA and NASAP compliance requirements, including background checks and drug/alcohol testing. • Must complete all site-specific safety training and testing required for access to client facilities. • OSHA 10/30 certification is a plus. #ZR

Company DescriptionJobs for Humanity is partnering with DISH to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: DISH Job DescriptionDepartment Summary Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience is paying off: in 2023, DISH earned the J.D. Power award for being #1 in Overall Customer Satisfaction for the sixth year in a row. Job Duties and Responsibilities What's in it for you? Guaranteed promotion after 6 months with a $1.00 per hour pay increase! Performance Incentives with the potential for up to $6,400 in your first year and $9,100 each following year! Paid training, paid time off & paid holidays 4-day work week with opportunities to work overtime Medical, Dental, Vision and Life Insurance packages and Health Savings Account Free DISH TV programming at a value of $114.99/month at your home, plus deeply discounted Sling TV and Boost Infinite phone plans 401(K) with company match & Employee stock purchasing program (ESPP) Tuition Reimbursement DISH-supplied van, tools, and uniforms Our greatest benefit is opportunity with over 400 of our current technician leadership starting as a technician. If you have grit and tenacity, you will grow quickly at DISH! Performance based promotions include an automatic 5% pay increase at level 2 and 10% at levels 3 and 4. What will you be doing? As a Field Technician, you will be representing DISH in customers' homes daily. We build our value by simplifying lives and using the DISH install to consult homeowners on their infinite smart home possibilities. Skills, Experience and Requirements All technicians must have: Aptitude to build rapport quickly. We want you to have a great time servicing our clients Ability to work at heights, including ladders up to 40 feet, and in all weather conditions Ability to lift over 70 lbs A valid driver's license in the state you are seeking employment with a driving record that meets DISH's safety standard Travel may be required Salary Range Compensation: $19.75/Hour Compensation and Benefits From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential.

Job DescriptionSalary: Based on experience and qualifications We are seeking an experienced Fiber Splicer to join our underground construction team here at Sammons Construction. This role is responsible for splicing, testing, troubleshooting, and maintaining fiber optic cable in underground environments while ensuring work is completed safely, accurately, and in accordance with industry standards.Key Responsibilities Perform fiber optic splicing (single-mode and multi-mode) in underground handholes, vaults, and enclosures Read and interpret fiber prints, splice schematics, and construction drawings Test fiber using OTDR, power meter, and light source equipment Troubleshoot fiber issues, identify faults, and perform necessary repairs Label, document, and maintain accurate splice records and as-built documentation Ensure all work complies with company safety policies and industry standards Coordinate with construction crews, supervisors, and project managers Maintain splicing equipment, tools, and vehicles in good working order Qualifications Minimum 2+ years of field experienceas a fiber splicer. Strong knowledge of underground fiber systems, enclosures, and splice cases Experience working in handholes, vaults, and confined spaces Ability to read and understand fiber design and construction prints Proficient with OTDR and fiber testing equipment Valid drivers license and clean driving record

Job DescriptionDescription: Building Automation Service Technicians (BAS) Technician based in Houston, TX ACIS, Inc. is a thriving commercial mechanical services provider specializing in the commercial and industrial HVAC industry. With a robust client base in Texas, we are expanding our team and seeking an experienced and detail-oriented HVAC Controls Technician. If you're a dedicated professional with a strong Interest in HVAC, this is your opportunity to join a dynamic company poised for growth. UNLOCK YOUR POTENTIAL We are seeking a Building Automation Service Technician who has experience installing, troubleshooting & servicing of DDC Building Automation Systems. Minimum 3 years of related experience required. IP networking knowledge as well as various field-level communication system knowledge is required. Knowledge Tridium AX/N4 necessary and other brand system experience preferred. Technician Duties: · Diagnose and repair complex direct digital control system malfunctions requiring thorough knowledge of mechanical systems and electronic theory, as well as the ability to create & modify program algorithms for multiple systems. · Ability to effectively communicate with internal and external customers. · Candidate must be able to coordinate time and tasks effectively with assistance from the project coordinator. · Maintain detailed service report notes. · Create control algorithms, download source code to controllers, manage system databases, and implement an animated front-end graphical user interface when required. · Analyze problems and resolve issues to ensure the complete system functions properly. · Perform service repairs, adjustments and calibration on building systems. · Coordinate and perform customer training and ensure timely completion of project closeout documents. · Provide technical support and direction to end-users and employees when applicable. The Perks of Working Here ACIS, Inc. is committed to offering comprehensive benefits to our team members, including: · Medical, dental, vision, and disability insurance. · 401K with company match programs. · Paid vacation and holidays. · Company vehicles (driving positions only), cell phones, and equipment as needed. · Opportunities for on-the-job training and certifications to support your career growth. Our Guiding Principles At ACIS, Inc., we live by our core values: Honesty, Humility, Passion, Excellence, Teamwork, Growth Our commitment to diversity At ACIS, Inc., we're committed to creating a workplace that's as diverse as the world we serve. We thoughtfully embrace diversity and equal opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against based on disability. We believe that a diverse and inclusive environment makes us stronger as a company and a community. We encourage people from all backgrounds to apply, as we strive to create a welcoming and inclusive environment for all. Requirements:

Job DescriptionClosets by Design is a nationally recognized leader in home organizing systems. We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more. We desire motivated, organized, caring individuals who have a passion to provide outstanding craftsmanship and superior customer service. We currently have the Carpentry/Installer Helper position available: Carpentry/Installer Helpers assist Installers with installation of products in a safe, high quality, productive, and profitable fashion. Demonstrate a commitment to client satisfaction by communicating what is necessary in a genuinely friendly and professional fashion. Operate company vehicle, tools, etc. in a safe manner. Benefits Listed pay of $k includes base pay + bonuses. Direct career track to Lead with a pay increase. Paid training and ongoing professional development. Monday through Friday, no weekends, no required overtime. Health and retirement benefits. Tools and equipment are provided. Enjoy breakfast with the team? We have weekly check-ins. Open door policy with the owner. Requirements Possess and maintain current drivers license, good driving record, and operate company vehicle in safe manner. Closet, garage, office installation experience preferred. Strong verbal and written communication skills. Strong personal organization skills. Closets by Design - Overview Closets by Design is a nationally recognized leader in home organizing systems. We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more. Closets by Design - Our Values Serve Others Be a Problem Solver Trust the Process We respond to all candidates within 24 hours and complete hiring in 7 days.

Benefits: Competitive salary Flexible schedule Free uniforms Role: Lead Home Service Technician / Handyman We provide: Year-round stable, steady work Regular work hours Flexible scheduling Company van and cover related expenses such as gas, oil changes, etc. *varies by location. TruBlue t-shirts, polos, and other company gear for the team Strong office support Trublue of Kingwood is a Home Ally Service company dedicated to providing premium handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance. We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. We want to hear from you if you have 10 or more years of paid experience in general carpentry and handyman work. We are looking for a seasoned Team Leader with the following experience: Bathroom upgrades / remodel Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US and speak fluent English. We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! Compensation: $23.00 - $26.00 per hour TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************