Installation technician jobs in Pennsylvania - 3,257 jobs

We are seeking an experienced Industrial and Commercial Technician to install, terminate, test, and commission a wide range of low-voltage and electrical cabling systems and integrated building technologies. This role involves working in active construction and industrial environments to deploy structured cabling, security systems, network-connected devices, and control systems while ensuring all installations meet industry standards, project specifications, and client expectations. Key Responsibilities Cabling & Infrastructure Install, route, terminate, label, and support: Ethernet (Cat5e/Cat6/Cat6A) Fiber optic (single-mode and multi-mode) Multiconductor control cable Alarm, speaker, and communication cabling Electrical and low-voltage power cabling (as permitted) Read and interpret prints, wiring diagrams, and project documentation Maintain proper cable management, grounding, bonding, and pathway installation (conduit, tray, J-hooks, etc.) Testing & Certification Certify Ethernet cabling using approved certification tools Test and certify fiber optic installations (Certification, OTDR, power meter/light source as applicable) Perform functional testing on alarm, speaker, control, and communication wiring Troubleshoot cabling faults, signal issues, and connectivity problems Systems Installation & Configuration Install, wire, and configure systems including: Card access and access control systems Burglar and intrusion detection systems Video surveillance and camera systems Intercom and paging systems Speaker and audio distribution systems Industrial manufacturing control panels and related field devices Assist with system commissioning and validation Coordinate with project managers, engineers, IT staff, and other trades Networking & IT Integration Understand basic networking concepts including IP addressing, VLANs, PoE, switches, and device connectivity Assist with network-connected device setup and troubleshooting Verify proper network communication between field devices and servers or controllers Construction & Jobsite Responsibilities Work safely and efficiently on active construction and industrial sites Follow all safety procedures, codes, and company standards Maintain tools, test equipment, and jobsite cleanliness Document installations, test results, and as-built conditions Qualifications Required Experience in industrial and/or commercial construction environments Proven hands-on experience installing low-voltage cabling systems Ability to certify Ethernet and fiber optic cabling Experience installing and wiring security, access control, camera, and control systems Strong troubleshooting and problem-solving skills Ability to read electrical/controls prints and technical drawings Familiarity with basic networking and IT concepts Valid driver's license and ability to travel to job sites Preferred Industry certifications (BICSI, ETA, manufacturer certifications, or similar) Fiber splicing experience Experience with industrial control panels or automation systems OSHA safety training or equivalent Lift, ladder, and conduit installation experience Physical Requirements Ability to lift and carry equipment and materials Ability to work on ladders, lifts, and in confined spaces Ability to work indoors and outdoors in varying conditions What We Offer Competitive pay based on experience Opportunities for training and certification Steady work on diverse industrial and commercial projects Supportive team environment with opportunities for advancement

The Department of Transportation is currently on the lookout for a skilled Medium Voltage Electrician to join our team. This dynamic role encompasses a diverse array of responsibilities, including the execution of preventive maintenance and repairs on various mechanical and electrical systems. The successful candidate will work with power supply and lighting systems, ensuring their optimal functionality, as well as maintaining fire alarm systems and traffic light controls. Additionally, the position involves the upkeep of carbon monoxide analyzing systems and tunnel ventilation fans, all of which are critical for public safety and efficient transportation operations. If you possess the necessary expertise and are eager to contribute to a vital sector, we encourage you to apply today! DESCRIPTION OF WORK In this position, it is essential to possess the personal hand tools typically required of a journeyman electrician. Your responsibilities will include the cleaning and lubrication of ventilation fan motors, bearings, dampers, and drive units, along with performing necessary mechanical repairs, adjustments, and parts replacements. You will be tasked with identifying and diagnosing faults in electrical circuitry and defective components by interpreting technical drawings and schematics, as well as utilizing various testing equipment. Additionally, you will repair, adjust, or replace any worn or malfunctioning components. Your work will encompass both low-voltage control circuits and industrial-grade high-voltage systems, specifically those operating between 480 volts and 23,000 volts. This includes servicing and cleaning tunnel light fixtures, which involves tasks such as re-lamping, ballast replacement, socket fixture repairs, rewiring, and overall fixture replacement. Furthermore, you will be responsible for the installation of electrical devices, fixtures, cables, and conduits, ensuring compliance with established standards and codes within the electrical trade, as well as servicing and maintaining detection and recording devices. Interested in learning more? Additional details regarding this position can be found in the position description. Work Schedule and Additional Information: Full-time employment Work hours are 6:00 AM to 2:00 PM, Monday - Friday, with a 30-minute lunch. This position may require rotating shift work due to 24/7 operations. Telework: You will not have the option to telework in this position. Salary: In some cases, the starting salary may be non-negotiable. You will receive further communication regarding this position via email. Check your email, including spam/junk folders, for these notices. REQUIRED EXPERIENCE, TRAINING & ELIGIBILITY QUALIFICATIONS Minimum Experience and Training Requirements: Five years of journey-level experience in the electrical trade; or An equivalent combination of experience and training. Conditions of Employment: This position requires possession of a valid Pennsylvania Driver's License. Additional Requirements: You must be able to perform essential job functions. How to Apply: Resumes, cover letters, and similar documents will not be reviewed, and the information contained therein will not be considered for the purposes of determining your eligibility for the position. Information to support your eligibility for the position must be provided on the application (i.e., relevant, detailed experience/education). If you are claiming education in your answers to the supplemental application questions, you must attach a copy of your college transcripts for your claim to be accepted toward meeting the minimum requirements. Unofficial transcripts are acceptable. Your application must be submitted by the posting closing date . Late applications and other required materials will not be accepted. Failure to comply with the above application requirements may eliminate you from consideration for this position. Veterans: Pennsylvania law (51 Pa. C.S. *7103) provides employment preference for qualified veterans for appointment to many state and local government jobs. To learn more about employment preferences for veterans, go to ************************************************ and click on Veterans. Telecommunications Relay Service (TRS): 711 (hearing and speech disabilities or other individuals). If you are contacted for an interview and need accommodations due to a disability, please discuss your request for accommodations with the interviewer in advance of your interview date. The Commonwealth is an equal employment opportunity employer and is committed to a diverse workforce. The Commonwealth values inclusion as we seek to recruit, develop, and retain the most qualified people to serve the citizens of Pennsylvania. The Commonwealth does not discriminate on the basis of race, color, religious creed, ancestry, union membership, age, gender, sexual orientation, gender identity or expression, national origin, AIDS or HIV status, disability, or any other categories protected by applicable federal or state law. All diverse candidates are encouraged to apply.

NOTE: The preferred candidate will have hands-on field technician experience working with CEMS (Continuous Emissions Monitoring Systems). Other preferred qualifications would be a background in HVAC, hospital electronics repair, office equipment repair, experienced level mechanics, and Instrument & Controls Technicians. Job Description The CEMS Field Service Technician is primarily responsible for service and repair of CEM systems at customer locations generally located within 300 miles of the technician's remote location. Technician also assists Field Service Manager when requested. Essential Functions Perform on-site repairs and quality assurance testing of various Continuous Emissions Monitoring Equipment, including: Full and dilution extractive sampling systems Hot/wet extractive sampling systems COMS and PM CEMS/CPMS Instrumental and sorbent trap mercury monitoring systems Conduct new equipment start-ups and customer training Conduct Quality Assurance Testing on CEM Systems Provide technical support to customers and co-workers Coordinate with customers for tech support and scheduled maintenance Work Environment: Industrial Environments Physical Demands: Must be able to meet certain physical demands such as: Consistent standing or walking Consistent bending, crouching or stooping Frequent lifting of objects weighing up to 50 pounds Climbing ladders and/or stairs Use of tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color Ability to operate an Aerial Lift from the platform or deck Ability and Willingness to work at elevated heights on stack platforms up to 300 feet Must be willing to work outdoors in industrial environments. Position Type/Expected Hours of Work Must be available to work 40+ hours per week. Will need to travel overnight. Education and Experience Preferred: Minimum of 5 years of experience in the CEMS field preferred but not required High school diploma or equivalent; some college or formal technical training desired Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $20-$25 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

ARM Group LLC is seeking a Field Technician, who will collaborate with a team of multi-disciplined engineers and scientists, project managers, and other staff to provide a wide range of field based geophysical data collection services during the design, study, implementation, and/or construction phases of projects related to environmental cleanup, water resources, mine & quarry, geotechnical, and natural gas. Primary Responsibilities: Participate in geophysical field investigations. Operate borehole geophysical equipment to collect well logging and imaging data. Collect surface geophysical data using EM31, EM61, magnetometer, seismic, electrical resistivity imaging, ground penetrating radar (GPR), radio detection utility locating tools, and gravity. Download data loggers and equipment; verify field data. Operate differential global positioning system (GPS) equipment. Prepare daily field reports and test summaries documenting the work being performed. Collaborate with other team members to meet deliverables on projects and obtain further knowledge and experiences. Effectively communicate with key stakeholders including project managers, project engineers, and other members of the project team. Requirements High School Diploma or equivalent. Possess excellent analytical problem-solving skills. Team orientated with the ability to perform independent hands-on fieldwork. A self-starter possessing strong communication and organizational skills. Valid Driver's license in good standing required. Preferred Requirements: OSHA 40-hr HAZWOPER, MSHA Surface Mining and/or Safeland training preferred. Bachelor's degree in Geology or related field. Physical Requirements: Requires travel to job sites including out of the local area overnight stays. Ability to lift 75 pounds on a regular basis. Desire to work outside in all climates and conditions. This is a safety sensitive position. Ability to operate a motor vehicle safely without restrictions on a daily basis. Ability to walk and stand continuously throughout the day, often on uneven surfaces with frequent bending and stooping - 8-10 hours per day. Your Wellness, Our Priority: A Look at Our BenefitsWe invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Field Service Engineer Chesterbrook, PA or Clifton Park, NY Responsible for ongoing support of corporate hardware, software, and IT infrastructure, including network and cloud environments. This role ensures system reliability, performance, security, and availability by developing and maintaining platforms aligned with business priorities and end-user needs. The position involves diagnosing and resolving hardware, software, and connectivity issues, and leading troubleshooting efforts Responsibilities Must be available to travel to different locations Strong technical knowledge of IT hardware, mobile phones, operating systems, and software applications Provide on-site technical support for IT and mobile phone products, including installation, configuration, maintenance, and repairs Diagnose and troubleshoot hardware and software issues and perform necessary repairs or replacements Collaborate with the internal technical support and engineering teams to resolve complex technical issues Maintain and manage inventory of spare parts and equipment Act as the technical lead for handling infrastructure related outages Excellent problem-solving and troubleshooting skills Outstanding customer service and interpersonal skills Excellent verbal, written, analytical, problem solving and formal presentation skills Requirements 3-5 years of proven experience working in various areas of IT such as software installation, hardware troubleshooting, network connectivity, and system maintenance. Prior Field Service Technician experience or similar role in IT a big plus Strong understanding of technology and business productivity systems Diligent attention to detail is essential CompTIA Net+ and/or CompTIA Security+ certifications preferred Experience with Cisco vManage, DNAC and ISE preferred Ability to multi-task and adapt to changes quickly Self-motivated with the ability to work in a fast-moving environment

Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Trailer Technician/Mechanic! The Trailer Technician/Mechanic will be responsible for the repair and maintenance of Class 7 - 8 trailers and will operate vehicles and test all working parts in various functions to ensure proper operation. Compensation: Competitive Hourly Pay - Paid weekly, every Friday! $24-$30/hr DOE * + SRT Bonus Opportunity; up to $15,000 annually; paid monthly and based on performance. Shift: Monday - Friday 7am -3:30pm The benefits of belonging - what's in it for you? Competitive hourly pay - paid weekly, every Friday Full benefits within 30 days Medical, dental, vision, prescription drug coverage, life insurance, disability insurance 401(k) match Paid vacation, holidays, and sick time Commitment to your safety through boot and prescription safety glasses reimbursement Career and learning development with an extensive training program through our Amerit University Employee referral program, up to $1,000 bonus ASE certification program with fee reimbursement and bonus Employee recognition platform that includes opportunities to redeem points for merchandise Employee Assistance Program (EAP) 24/7 nurse triage line Employee discounts on cell phone service and entertainment tickets Employee resource groups (ERGs) that foster inclusion Wellness and fitness programs through our providers What the Trailer Technician/Mechanic role looks like: Prepare vehicle records and report both manually and on a computer Perform safety inspections of equipment and prepare safety documentation required Inspect and perform work on the under parts of vehicles Access any area of the equipment or vehicle to perform necessary maintenance Move parts to and from the job site and remove or install these parts on vehicle Comply with all applicable laws/regulations, as well as company policies/procedures Perform other duties as required What our ideal candidate looks like: Must have at least 2 years' experience performing vehicle and trailer maintenance. Must be able to operate a manual transmission vehicle to determine if operating properly Must be able to enter and exit the driver's compartment of the truck and/or behind cab using normally available footholds and handholds Must provide own hand tools Perform DOT inspections Basic computer skills Basic written and verbal communication skills (documentation, communication with peers, supervisors, etc.) Working Conditions: Exposure to heavy traffic areas while performing the duties of the job. Exposure to considerable amounts of dust, diesel fumes and noise. Exposure to chemicals, oils, greases or other irritants Access any area of the equipment or vehicle to perform necessary maintenance Ability to move and position heavy objects Ability to bend, stoop, crouch, kneel and crawl to repair vehicles Ability to work outside in various weather conditions. Are you ready to advance your career as a Trailer Technician with Amerit Fleet Solutions? Apply Today! ******************************************************* #Mechanic #Hiring #TrailerMechanic #NowHiring #TrailerTechnicianCareer #MechanicJobs #TrailerTechnician INDBS

DescriptionField Service Technician I Location: Exton, PA Salary: $61,000 - $63,000 per year Who are we? Established in 1975, Shimadzu Scientific Instruments is one of the largest suppliers of analytical instrumentation, physical testing, and environmental monitoring systems in the world. Ground-breaking scientific research, manufacturing ideas and results continue to propel Shimazu's outstanding reputation and "Excellence in Science." People dedicated to our mission have the largest impact on Shimadzu's continued growth and success. Would YOU like to join a diverse team of professionals working together with researchers, scientists and manufacturers to help better lives worldwide? What can Shimadzu offer YOU? Our Culture - A work environment that values diversity, inclusion & belonging Competitive Compensation - Day 1 Benefits & Competitive Salary Retirement Benefits - Matching 401K & Profit-Sharing Program Professional Growth - Clear pathways for Career, Leadership and Personal Development Health Benefits - Flexible Spending/Health Savings Accounts Work-Life Balance - Generous & Front-Loaded Paid Time Off Plan Education - Tuition Assistance Program for both graduate and undergraduate levels Insurance Perks - Pet Insurance, optional Identity theft, legal pre-paid and critical care buy-up insurance benefits, generous company paid life insurance & short-term disability programs Work Flexibility - Business casual Dress Attire & casual (jeans) Friday! Employee Engagement - Employee Resource Groups to network, build a sense of community and enhance one's career and personal development ADDITIONAL COMPENSATION: For Service, Technical Support, Marketing & Sales Roles: Additional compensation is available through either an Incentive and/or Commission Plan. For Employees who reside in Connecticut, Massachusetts, New Jersey and California: Additional compensation is offered through a Cost-of-Living Adjustment (COLA) Position Summary: Shimadzu Scientific Instruments is seeking a Field Service Technician to join our team and play a vital role in providing exceptional service and support for our analytical instrumentation. In this position, you will be responsible for a variety of service-related functions, including the repair, maintenance, and performance verification of assigned products, including demo equipment and instruments returned from customers. JOB FUNCTIONS INCLUDE, BUT ARE NOT LIMITED TO: Provide daily repair and maintenance support for assigned products, including installations. Conduct in-house bench repairs and onsite customer repairs as needed while primarily handling field service calls with limited supervision. Travel within the local region (including day and overnight trips) to support customer needs. Offer technical support via phone to customers and field personnel regarding repairs, maintenance and installations. EDUCATION AND QUALIFICATIONS: Associate degree in Electrical Engineering or Technology; a bachelor's degree is preferred. At least one year of experience in repairing analytical instrumentation, including HPLC, GC, LCMS, AA, or similar instruments. Strong technical knowledge and understanding of these technologies. Excellent communication and customer relations skills. Willingness to travel At Shimadzu Scientific Instruments, we believe in providing structured career paths that recognize and reward talent. If your expertise surpasses the level specified in the listed position, we offer the flexibility to upgrade positions to better suit your qualifications accompanied by a salary adjustment. Compensation & Benefits: This full-time, non-exempt position comes with a comprehensive benefits package. In your first year, you will receive 10 paid vacation days, 8 paid personal days, 8 paid scheduled holidays and 3 paid floating holidays (Residents of California and Puerto Rico will receive state-mandated sick leave instead of personal days). After one year of employment, you will also be eligible for a generous short-term disability program with the company covering 100% of monthly premiums. The starting salary range for this role is $61,000 to $63,000 annually, paid semi-monthly. As a non-exempt position, you will be eligible for overtime and double time pay, as outlined in our employee handbook. Additional variable compensation includes an incentive plan (10% of base salary) based on company and service performance, paid semi-annually in April and October. A year-end discretionary bonus may also be awarded based on overall company performance. This position includes a company car with a fuel card (with a $55 per pay deduction for personal use), company laptop, and a company-paid cell phone, which remains company property but can be used for personal purposes. For more details on benefits, please visit ************************** Shimadzu is not accepting unsolicited assistance from search firms for this employment opportunity. Please, no phone calls or emails. All resumes submitted by search firms to any employee at Shimadzu via email, the Internet or in any form and/or method without a valid written search agreement in place for this position (and agency was requested to work the requisition) will be deemed the sole property of Shimadzu. No fee will be paid in the event the candidate is hired by Shimadzu as a result of the referral or through other means. EEO Statement: Shimadzu Scientific Instruments (SSI) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application process, please click here. Qualifications BehaviorsFunctional Expert - Considered a thought leader on a subject Innovative - Consistently introduces new ideas and demonstrates original thinking Thought Provoking - Capable of making others think deeply on a subject Detail Oriented - Capable of carrying out a given task with all details necessary to get the task done well Team Player - Works well as a member of a group EducationBachelors of Chemistry (preferred) Associates of Electrical Engineering (required) Skills Instrument Repair (required) Instrument- HPLC (required) Instrument- GC (required) Instrument- ICP (required) Instrument- AA (required) Instrument- UV-VIS (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

About us At Cooper University Health Care , our commitment to providing extraordinary health care begins with our team. Our extraordinary professionals are continuously discovering clinical innovations and enhanced access to the most up-to-date facilities, equipment, technologies and research protocols. We have a commitment to our employees to provide competitive rates and compensation programs. Cooper offers full and part-time employees a comprehensive benefits program, including health, dental, vision, life, disability, and retirement. We also provide attractive working conditions and opportunities for career growth through professional development. Discover why Cooper University Health Care is the employer of choice in South Jersey. #LI-CU1 Short Description EXCITING NEW RATES! Assists interventionalists in all procedures within the scope of interventional radiology and vascular surgery, but not limited to oncology, vascular and trauma. Skill set must be maintained to handle supplies/instrumentation associated with interventional procedures. Adheres to all infection prevention policies, utilizing the appropriate PPE needed. Experience Required 1-2 year of Interventional Radiology or Cardiovascular Interventional Technology preferred Education Requirements Graduate of AMA approved program for Diagnostic Radiology and therefore registry eligible. NJ DEP license required upon hire License/Certification Requirements Current BLS. Current ARRT - American Registry Radiology Tech License. Current NJ-RADTECH - NJ Radiology Tech License

Prime Robotics is seeking an experienced Warehouse Racking Installer to support the installation of the rack structurefor our Advanced Pallet Station (APS) systems. This role will initially be engaged on a temporary / contract basis for upcoming installations, with the intent to develop into a recurring part-time role as our deployment volume increases throughout the year. This position is ideal for someone with hands-on experience installing warehouse pallet rack or structural steel, who understands how to precisely position, level, plumb, and square mechanical structures in an industrial environment. Key Responsibilities Install and assemble warehouse rack and structural framing components per drawings and installation plans Accurately lay out rack positions on the floor using tape, chalk line, laser, or transit Ensure rack structures are: Properly anchored Level, plumb, and square Installed to required tolerances for robotic operation Operate forklifts and lifts to position rack components safely Use common installation tools including: Impact drivers and torque wrenches Hammer drills and concrete anchors Levels, laser levels, squares, and measuring tools Coordinate with Prime Robotics field engineers and site personnel during installation Identify and flag installation issues, floor conditions, or tolerance concerns early Follow all site safety requirements and Prime Robotics installation standards Requirements Required Qualifications Proven experience installing warehouse racking or similar industrial structures Pallet rack, shelving systems, mezzanines, or structural frames Forklift certification (or ability to obtain quickly) Strong understanding of: Floor layout and anchoring Leveling, plumbing, and squaring rack systems Mechanical assembly best practices Comfortable working in active warehouse or construction environments Ability to read and follow mechanical drawings and installation instructions Physically able to lift and position heavy components with equipment Reliable, detail-oriented, and safety-focused Benefits This is a contract position

Job Title: Interventional Technologist -Days Job Category: Diagnostic Services, Radiology Schedule: Days Work Type: Full time Department: Interventional Radiology Team Job Summaryup to $25,000 sign on bonus for eligible applicants!!This posting reflects an opening for an IR Technologist I and we are seeking candidates for that position. Geisinger reserves the right to consider applicants for higher levels of this role to include IR Technologist II based on their skills, qualifications, and experience. We encourage all qualified individuals to apply.Interventional Technologists independently perform or assist the licensed practitioner in the completion of cardiac, neuro, body, and/or vascular-interventional procedures. Interventional Technologists prepare, administer and document activities related to medications and radiation exposure in accordance with federal and state laws, regulations, or lawful institutional policy.Interventional Technologists are responsible for the administration of ionizing radiation for diagnostic, therapeutic or research purposes. Interventional Technologists perform radiographic, fluoroscopic, and other procedures and acquires and analyzes data needed for diagnosis at the request of and for interpretation by a licensed practitioner. Job Duties Ensures correct order is obtained, patient is properly identified and prepared for exam, and that clinical history is corroborated and appropriately documented while respecting confidentiality. Utilizes appropriate imaging protocol and optimizes technical factors while maximizing patient safety, optimizing patient care, and applying principles of ALARA (As Low as Reasonably Achievable). Preparing and/or administering, as applicable, medications through new or existing vascular access site as prescribed by a licensed practitioner. Evaluates images for proper positioning and acceptable technical quality and verifies archival storage and/or transfer of data, post processing of data if applicable. Educating and monitoring students and other health care providers. Assists or performs diagnostic, fluoroscopic, or interventional procedures as prescribed by a licensed practitioner. Maintains intra-arterial access as prescribed by a licensed practitioner. Panning of the procedure table during image production. Participates in physiological monitoring of patients. Performing manual hemostasis during and after the procedure. Operates and ensures the quality control of hemodynamic recording devices, electrocardiogram monitoring equipment/cardiac stimulator, oxygen consumption equipment, and blood analysis equipment. Initiates ACLS protocols as required for cardiac roles. Performs non-interpretive fluoroscopic procedures as prescribed by a licensed practitioner. Maintains and removes peripherally inserted central catheters as prescribed by a licensed practitioner. Practice of sterile technique preparing for procedure including scrubbing, applying surgical gown, gloving, draping and setup of instrument table. Records, monitors, and assesses hemodynamic/electrogram data collected during procedures. Work is typically performed in a clinical environment. Accountable for satisfying all job specific obligations and complying with all organization policies and procedures. The specific statements in this profile are not intended to be all-inclusive. They represent typical elements considered necessary to successfully perform the job. Additional competencies and skills outlined in any department-specific orientation will be considered essential to the performance of the job related to that position. Position Details Required Certifications or Licensures: Interventional Radiology: Certification by the American Registry of Radiology Technologist (ARRT-R) is required. New graduates must obtain primary certification prior to the start date. Advanced certification of ARRT-VI, ARRT-CI, and/or ARRT-CV must be obtained within two (2) years of hire date. Applicants hired after March 10, 2024, must complete steps required for advancing to level 2, including advanced certification, within 24 months of hire. Cardiology: Graduate from an accredited cardiovascular technology specialty training program or Certification by the American Registry of Radiology Technologist (ARRT). Advanced certification of Registered Cardiac Electrophysiology Specialist (RCES) or Registered Cardiovascular Invasive Specialist (RCIS) must be obtained within two (2) years of date of hire. Advanced Cardiac Life Support (ACLS) certification from American Heart Association (AHA) within 6 months of date of hire. Pediatric Advanced Life Support (PALS) certification within 6 months of date of hire (Geisinger Medical Center campus only). EducationGraduate from Specialty Training Program-Radiologic Technology (Required), Bachelor's Degree-Related Field of Study (Preferred) ExperienceMinimum of 1 year-Related work experience (Preferred) Certification(s) and License(s) Radiography (R) - American Registry of Radiologic Technologists (ARRT); Basic Life Support Certification - Default Issuing Body Our Purpose & ValuesOUR PURPOSE & VALUES: Everything we do is about caring for our patients, our members, our students, our Geisinger family and our communities. KINDNESS: We strive to treat everyone as we would hope to be treated ourselves. EXCELLENCE: We treasure colleagues who humbly strive for excellence. LEARNING: We share our knowledge with the best and brightest to better prepare the caregivers for tomorrow. INNOVATION: We constantly seek new and better ways to care for our patients, our members, our community, and the nation. SAFETY: We provide a safe environment for our patients and members and the Geisinger family We offer healthcare benefits for full time and part time positions from day one, including vision, dental and domestic partners. Perhaps just as important, from senior management on down, we encourage an atmosphere of collaboration, cooperation and collegiality. We know that a diverse workforce with unique experiences and backgrounds makes our team stronger. Our patients, members and community come from a wide variety of backgrounds, and it takes a diverse workforce to make better health easier for all. We are proud to be an affirmative action, equal opportunity employer and all qualified applicants will receive consideration for employment regardless to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. By applying, you consent to your information being transmitted by JobFlow to the Employer, as data controller, through the Employer's data processor SonicJobs. See Geisinger Terms & Conditions at and Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

Cable Services Company, headquartered in Williamsport, PA, performs construction and cable installation projects within a five to six state area in the Northeast region of the US. Project hours vary by project and can be influenced by weather. Frequent overnight travel is required along with overtime in order to meet project related deadlines. Cable Services Company, Inc. maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks. A Fiber Splicer will perform cable splicing in the air, underground, indoors and outdoors. In addition this position requires frequent travel in which the employee would be away from home. This position requires overnight work during consumer non-peak usage hours (Midnight to 7am) along with shared weekend on-call status for emergency restoration. Essential Functions and Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Install, troubleshoot, and maintain fiber optic system Prep and hang fiber optic enclosures, nodes and related equipment Route, splice and/or terminate fiber in equipment racks at central offices, hub sites or inside of buildings Work with OSP Project Manager's to perform fusion splicing as directed Read design maps, fiber schematics and basic electronic designs Operate aerial lift and other related equipment to perform job functions Required to be on-call for emergency restoration Frequently communicate with management on workload status May occasionally perform routine construction work such as pulling rope/cables, climbing ladders, using hand tools, digging with a shovel, etc. Accurately complete all required company documentation for each assignment according to established company standards and procedures (ie timesheet, truck report, expense report) Responsible for assigned company vehicle, tools, materials and equipment Perform work in a safe manner and comply with all established company safety policies and procedures Perform other duties and tasks as assigned in order to help team complete a project Required Education and Experience Minimum of 2 years' experience splicing all types of fiber optic cables High school diploma or GED Experience working in a bucket truck at heights in excess of 30-40 ft. Proficiency using related splicing equipment including fusion splicers, OTDR, optical power meters, fiber identifiers and all related splicing tools Ability to distinguish between colors Experience reading design maps, fiber schematics and basic electronic designs Must possess exceptional organizational skills and be detailed oriented Must be able to occasionally move materials/equipment weighing up to 80 pounds Ability to maintain a positive attitude and strong work ethic that can provide high productivity with minimal supervision Preferred Education and Experience 5+ years of experience splicing all types of fiber optic cables Additional Eligibility Qualifications Valid driver's license with a clean driving record Ability to pass a criminal background screen and drug test Work Environment While performing this job, the employee may be occasionally required to stand, walk handle or operate object, tools or controls Often work will be performed near busy highways and streets Work may be performed in a confined splice trailer or in an outdoor environment Cable Services Company, Inc . is proud to be an Equal Opportunity Employer minorities / females / veterans / individuals with disabilities / sexual orientation / gender identity Requirements Please note that only applications from individuals residing in the United States will be considered for this position. We appreciate your understanding and thank all applicants for their interest. Benefits Health, Dental, Life Insurance, Short Term Disability, Vacation, Holiday and 401K

If you are a commercial HVAC Technician or Building Automation Technician that is interested in retiring young or rich (or both), please read on. We are working with a Global HVAC and Building Automation company that is looking for Entry-Mid level commercial HVAC / Building Automation Technicians to work approximately an hour radius around Berwick, PA. Position will consist of a combination of installation and routine service. Company provides several incentives which will ensure that you and your family retire with a great nest egg. Benefits include: -100% 401k match up to 6% of your Salary -Tuition Reimbursement - Make yourself more marketable on the company's dime -Free Retirement Counseling by Certified Retirement Specialists -Employee performance bonuses for all positions -ESOP Plan - Employee Stock Ownership Plan with Company Match -Life Insurance for Spouse and Children -Endless promotion opportunities - Make more money=retire sooner and wealthier -Company HSA contribution -Best and most affordable health care package in the industry You will work on Fortune 500, Sporting Venues, Educational, Healthcare, Pharma, and large Manufacturing/Industrial structures. We are interested in speaking with Commercial HVAC and/or Building Automation Technicians that have 2+ years of experience up to Sr Level. Company has great leadership team and will allow you opportunity to grow financially and professionally. Please send resume as a PDF or Word attachment. This is a direct hire position where you will be a direct employee of the hiring company from day 1 with Vehicle, Benefits/401k. All applications are confidential. KEYWORDS: HVAC Technician, HVAC Service Technician, Building Automation, BAS, DDC, Direct Digital Controls, LON, LonWorks, RTU's, Split Systems, Chillers, BACnet, Johnson Controls, Delta Controls, Siemens, Honeywell, Tridium, Alerton, Building Automation Technician, Mechanical Engineering, HVAC Controls, ASHRAE, HVAC Project Engineer, HVAC Project Manager, ATC Controls, Automatic Temperature Controls, Metasys, Automated Logic, Schneider Electric, Niagara AX, Building Automation Graphics, Building Automation Controls, Building Automation Controls Project Manager, Building Automation Systems Specialist, Tridium N4, Tridium R2, Brad Culp Sr. Technical Recruiter/Partner Solution Staffing, Inc. 207 Amy Court North Wales, PA 19454 Ph: (267) 222-8760 Brad@Solutionstaffing.net www.solutionstaffing.net

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

DescriptionField Service Technician I Location: Exton, PA Salary: $61,000 - $63,000 per year Who are we? Established in 1975, Shimadzu Scientific Instruments is one of the largest suppliers of analytical instrumentation, physical testing, and environmental monitoring systems in the world. Ground-breaking scientific research, manufacturing ideas and results continue to propel Shimazu's outstanding reputation and "Excellence in Science." People dedicated to our mission have the largest impact on Shimadzu's continued growth and success. Would YOU like to join a diverse team of professionals working together with researchers, scientists and manufacturers to help better lives worldwide? What can Shimadzu offer YOU? Our Culture - A work environment that values diversity, inclusion & belonging Competitive Compensation - Day 1 Benefits & Competitive Salary Retirement Benefits - Matching 401K & Profit-Sharing Program Professional Growth - Clear pathways for Career, Leadership and Personal Development Health Benefits - Flexible Spending/Health Savings Accounts Work-Life Balance - Generous & Front-Loaded Paid Time Off Plan Education - Tuition Assistance Program for both graduate and undergraduate levels Insurance Perks - Pet Insurance, optional Identity theft, legal pre-paid and critical care buy-up insurance benefits, generous company paid life insurance & short-term disability programs Work Flexibility - Business casual Dress Attire & casual (jeans) Friday! Employee Engagement - Employee Resource Groups to network, build a sense of community and enhance one's career and personal development ADDITIONAL COMPENSATION: For Service, Technical Support, Marketing & Sales Roles: Additional compensation is available through either an Incentive and/or Commission Plan. For Employees who reside in Connecticut, Massachusetts, New Jersey and California: Additional compensation is offered through a Cost-of-Living Adjustment (COLA) Position Summary: Shimadzu Scientific Instruments is seeking a Field Service Technician to join our team and play a vital role in providing exceptional service and support for our analytical instrumentation. In this position, you will be responsible for a variety of service-related functions, including the repair, maintenance, and performance verification of assigned products, including demo equipment and instruments returned from customers. JOB FUNCTIONS INCLUDE, BUT ARE NOT LIMITED TO: Provide daily repair and maintenance support for assigned products, including installations. Conduct in-house bench repairs and onsite customer repairs as needed while primarily handling field service calls with limited supervision. Travel within the local region (including day and overnight trips) to support customer needs. Offer technical support via phone to customers and field personnel regarding repairs, maintenance and installations. EDUCATION AND QUALIFICATIONS: Associate degree in Electrical Engineering or Technology; a bachelor's degree is preferred. At least one year of experience in repairing analytical instrumentation, including HPLC, GC, LCMS, AA, or similar instruments. Strong technical knowledge and understanding of these technologies. Excellent communication and customer relations skills. Willingness to travel At Shimadzu Scientific Instruments, we believe in providing structured career paths that recognize and reward talent. If your expertise surpasses the level specified in the listed position, we offer the flexibility to upgrade positions to better suit your qualifications accompanied by a salary adjustment. Compensation & Benefits: This full-time, non-exempt position comes with a comprehensive benefits package. In your first year, you will receive 10 paid vacation days, 8 paid personal days, 8 paid scheduled holidays and 3 paid floating holidays (Residents of California and Puerto Rico will receive state-mandated sick leave instead of personal days). After one year of employment, you will also be eligible for a generous short-term disability program with the company covering 100% of monthly premiums. The starting salary range for this role is $61,000 to $63,000 annually, paid semi-monthly. As a non-exempt position, you will be eligible for overtime and double time pay, as outlined in our employee handbook. Additional variable compensation includes an incentive plan (10% of base salary) based on company and service performance, paid semi-annually in April and October. A year-end discretionary bonus may also be awarded based on overall company performance. This position includes a company car with a fuel card (with a $55 per pay deduction for personal use), company laptop, and a company-paid cell phone, which remains company property but can be used for personal purposes. For more details on benefits, please visit ************************** Shimadzu is not accepting unsolicited assistance from search firms for this employment opportunity. Please, no phone calls or emails. All resumes submitted by search firms to any employee at Shimadzu via email, the Internet or in any form and/or method without a valid written search agreement in place for this position (and agency was requested to work the requisition) will be deemed the sole property of Shimadzu. No fee will be paid in the event the candidate is hired by Shimadzu as a result of the referral or through other means. EEO Statement: Shimadzu Scientific Instruments (SSI) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application process, please click here. Qualifications BehaviorsFunctional Expert - Considered a thought leader on a subject Innovative - Consistently introduces new ideas and demonstrates original thinking Thought Provoking - Capable of making others think deeply on a subject Detail Oriented - Capable of carrying out a given task with all details necessary to get the task done well Team Player - Works well as a member of a group EducationBachelors of Chemistry (preferred) Associates of Electrical Engineering (required) Skills Instrument Repair (required) Instrument- HPLC (required) Instrument- GC (required) Instrument- ICP (required) Instrument- AA (required) Instrument- UV-VIS (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Prepare vehicle records and report both manually and on a computer. Perform safety inspections of equipment and prepare safety documentation required. Inspect and perform work on the under parts of vehicles. Access any area of the equipment or vehicl Technician, Trailer, Vehicle, Automotive, Transportation

About us At Cooper University Health Care , our commitment to providing extraordinary health care begins with our team. Our extraordinary professionals are continuously discovering clinical innovations and enhanced access to the most up-to-date facilities, equipment, technologies and research protocols. We have a commitment to our employees to provide competitive rates and compensation programs. Cooper offers full and part-time employees a comprehensive benefits program, including health, dental, vision, life, disability, and retirement. We also provide attractive working conditions and opportunities for career growth through professional development. Discover why Cooper University Health Care is the employer of choice in South Jersey. Short Description EXCITING NEW RATES! Assists interventionalists in all procedures within the scope of interventional radiology and vascular surgery, but not limited to oncology, vascular and trauma. Skill set must be maintained to handle supplies/instrumentation associated with interventional procedures. Adheres to all infection prevention policies, utilizing the appropriate PPE needed. Experience Required 1-2 year of Interventional Radiology or Cardiovascular Interventional Technology preferred Education Requirements Graduate of AMA approved program for Diagnostic Radiology and therefore registry eligible. NJ DEP license required upon hire. License/Certification Requirements Current BLS. Current ARRT - American Registry Radiology Tech License. Current NJ-RADTECH - NJ Radiology Tech License.

Prime Robotics is seeking an experienced Warehouse Racking Installer to support the installation of the rack structurefor our Advanced Pallet Station (APS) systems. This role will initially be engaged on a temporary / contract basis for upcoming installations, with the intent to develop into a recurring part-time role as our deployment volume increases throughout the year. This position is ideal for someone with hands-on experience installing warehouse pallet rack or structural steel, who understands how to precisely position, level, plumb, and square mechanical structures in an industrial environment. Key Responsibilities Install and assemble warehouse rack and structural framing components per drawings and installation plans Accurately lay out rack positions on the floor using tape, chalk line, laser, or transit Ensure rack structures are: Properly anchored Level, plumb, and square Installed to required tolerances for robotic operation Operate forklifts and lifts to position rack components safely Use common installation tools including: Impact drivers and torque wrenches Hammer drills and concrete anchors Levels, laser levels, squares, and measuring tools Coordinate with Prime Robotics field engineers and site personnel during installation Identify and flag installation issues, floor conditions, or tolerance concerns early Follow all site safety requirements and Prime Robotics installation standards Requirements Required Qualifications Proven experience installing warehouse racking or similar industrial structures Pallet rack, shelving systems, mezzanines, or structural frames Forklift certification (or ability to obtain quickly) Strong understanding of: Floor layout and anchoring Leveling, plumbing, and squaring rack systems Mechanical assembly best practices Comfortable working in active warehouse or construction environments Ability to read and follow mechanical drawings and installation instructions Physically able to lift and position heavy components with equipment Reliable, detail-oriented, and safety-focused Benefits This is a contract position

Cable Services Company, headquartered in Williamsport, PA, performs construction and cable installation projects within a five to six state area in the Northeast region of the US. Project hours vary by project and can be influenced by weather. Frequent overnight travel is required along with overtime in order to meet project related deadlines. Cable Services Company, Inc. maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks. A Fiber Splicer will perform cable splicing in the air, underground, indoors and outdoors. In addition this position requires frequent travel in which the employee would be away from home. This position requires overnight work during consumer non-peak usage hours (Midnight to 7am) along with shared weekend on-call status for emergency restoration. Essential Functions and Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Install, troubleshoot, and maintain fiber optic system Prep and hang fiber optic enclosures, nodes and related equipment Route, splice and/or terminate fiber in equipment racks at central offices, hub sites or inside of buildings Work with OSP Project Manager's to perform fusion splicing as directed Read design maps, fiber schematics and basic electronic designs Operate aerial lift and other related equipment to perform job functions Required to be on-call for emergency restoration Frequently communicate with management on workload status May occasionally perform routine construction work such as pulling rope/cables, climbing ladders, using hand tools, digging with a shovel, etc. Accurately complete all required company documentation for each assignment according to established company standards and procedures (ie timesheet, truck report, expense report) Responsible for assigned company vehicle, tools, materials and equipment Perform work in a safe manner and comply with all established company safety policies and procedures Perform other duties and tasks as assigned in order to help team complete a project Required Education and Experience Minimum of 2 years' experience splicing all types of fiber optic cables High school diploma or GED Experience working in a bucket truck at heights in excess of 30-40 ft. Proficiency using related splicing equipment including fusion splicers, OTDR, optical power meters, fiber identifiers and all related splicing tools Ability to distinguish between colors Experience reading design maps, fiber schematics and basic electronic designs Must possess exceptional organizational skills and be detailed oriented Must be able to occasionally move materials/equipment weighing up to 80 pounds Ability to maintain a positive attitude and strong work ethic that can provide high productivity with minimal supervision Preferred Education and Experience 5+ years of experience splicing all types of fiber optic cables Additional Eligibility Qualifications Valid driver's license with a clean driving record Ability to pass a criminal background screen and drug test Work Environment While performing this job, the employee may be occasionally required to stand, walk handle or operate object, tools or controls Often work will be performed near busy highways and streets Work may be performed in a confined splice trailer or in an outdoor environment Cable Services Company, Inc . is proud to be an Equal Opportunity Employer minorities / females / veterans / individuals with disabilities / sexual orientation / gender identity Requirements Please note that only applications from individuals residing in the United States will be considered for this position. We appreciate your understanding and thank all applicants for their interest. Benefits Health, Dental, Life Insurance, Short Term Disability, Vacation, Holiday and 401K

About us At Cooper University Health Care , our commitment to providing extraordinary health care begins with our team. Our extraordinary professionals are continuously discovering clinical innovations and enhanced access to the most up-to-date facilities, equipment, technologies and research protocols. We have a commitment to our employees to provide competitive rates and compensation programs. Cooper offers full and part-time employees a comprehensive benefits program, including health, dental, vision, life, disability, and retirement. We also provide attractive working conditions and opportunities for career growth through professional development. Discover why Cooper University Health Care is the employer of choice in South Jersey. Short Description EXCITING NEW RATES! Assists interventionalists in all procedures within the scope of interventional radiology and vascular surgery, but not limited to oncology, vascular and trauma. Skill set must be maintained to handle supplies/instrumentation associated with interventional procedures. Adheres to all infection prevention policies, utilizing the appropriate PPE needed. Experience Required 1-2 year of Interventional Radiology or Cardiovascular Interventional Technology preferred Education Requirements Graduate of AMA approved program for Diagnostic Radiology and therefore registry eligible. NJ DEP license required upon hire. License/Certification Requirements Current BLS. Current ARRT - American Registry Radiology Tech License. Current NJ-RADTECH - NJ Radiology Tech License.