Installation technician jobs in Toms River, NJ

We are seeking a skilled Field Technician to service, maintain, and repair low voltage public transportation equipment for NJ Transit. This position involves working at rail stations and bus garages throughout Central New Jersey, focusing on critical fare collection systems including Ticket Vending Machines (TVMs), fare gates, Ticket Office Machines (TOMs), bus validators, and fareboxes. Key Responsibilities Equipment Maintenance: Service and maintain low voltage fare collection equipment including Ticket Vending Machines, fare gates, Ticket Office Machines at NJT rail stations, as well as validators and fareboxes on buses at bus garages Field Service: Perform on-site troubleshooting, diagnostics, and repairs at train stations, bus garages, and transit facilities throughout New Jersey System Installation: Install, configure, and upgrade fare collection hardware and software systems for station-based equipment and bus-mounted fare collection devices Preventive Maintenance: Conduct routine maintenance schedules and system health checks to ensure optimal equipment performance across both rail and bus systems Technical Support: Provide technical assistance and basic training to station personnel, bus operators, garage staff, and NJT staff Documentation: Maintain detailed service records, repair logs, and maintenance activities for all equipment serviced Safety Compliance: Follow all safety protocols and procedures when working in active rail station environments and bus garage facilities Qualifications Required: Associate's degree in Electronics, Electrical Technology, or related technical field 2+ years of field service experience with low voltage systems or electronic equipment Strong knowledge of electronic circuits, diagnostic tools, and repair techniques Familiarity with public transportation systems and fare collection technology preferred not required Valid driver's license with clean driving record Ability to operate a company truck for daily travel to multiple work sites Ability to work independently with minimal supervision Flexibility to work variable hours as needed to meet project demands Schedule flexibility is essential: Must be willing and able to work weekends, holidays, and overtime as needed for emergency repairs and system maintenance Preferred: Experience with transit systems or public transportation equipment is a plus Knowledge of point-of-sale systems, card readers, or payment processing equipment Understanding of industry regulations and safety standards Excellent problem-solving and communication skills Customer service experience Physical Requirements Ability to lift and carry up to 50 lbs of equipment and tools Comfortable working in active rail station environments and bus garage facilities (indoor/outdoor conditions) Ability to work around moving trains, buses, and in station platform areas Capable of standing, kneeling, and working in various positions for extended periods Manual dexterity for handling small electronic components and tools Work Details Contract Duration: 6 month project with possibility of extensions Primary Schedule: 1st Shift 5am-1:30pm and 2nd shift 1pm-9:30pm Monday through Friday with rotating weekends and holidays Schedule Flexibility Required: Must be available for flexible hours, weekend work, holidays, and emergency calls as needed to maintain critical transit systems Location: Various NJT rail stations and bus garages throughout Central New Jersey Travel: Assigned to multiple stations and garages but may need to assist at other locations during a shift (Company Truck provided) Environment: Active rail stations, platforms, bus garages, and operational transit environments

Multiple Positions Available! We are expanding our team and currently hiring Plumbing and HVAC Service Technicians, Plumbing Superintendent for New Construction Project within our company. Read all the information about this opportunity carefully, then use the application button below to send your CV and application. These positions offer the opportunity to work in a collaborative environment, contribute to meaningful projects, and grow professionally within a fast-moving organization. We are seeking a skilled and customer-focused Plumbing Service Technician to join our growing team. xevrcyc The ideal candidate will diagnose, repair, and install residential and/or commercial plumbing systems while providing top-tier customer service. Benefits • Competitive hourly wage or salary • Overtime opportunities • Paid time off and holidays • Company vehicle, tools, and uniforms provided • Ongoing training and career advancement opportunities

HVAC Technician - Newtown, PA Monday - Friday first shift, full time direct-hire The HVAC Technician will perform preventive, corrective, and predictive maintenance on commercial and industrial heating, ventilation, air conditioning, and refrigeration systems supporting office, production, and utility areas. This role ensures the reliable performance and regulatory compliance of environmental control systems critical to pharmaceutical manufacturing operations. The ideal candidate will be a self-sufficient, highly skilled professional with strong mechanical and electrical troubleshooting abilities and experience maintaining systems in a cGMP-regulated environment. This position's responsibilities will include, but not be limited to the following: Perform preventive and corrective maintenance on HVAC, refrigeration, and building automation systems to ensure optimal performance and compliance with cGMP and company standards. Diagnose and repair complex mechanical, pneumatic, and electrical malfunctions across chillers, air handlers, rooftop units, boilers, and process cooling/heating loops. Inspect, calibrate, and maintain sensors, thermostats, actuators, and control valves for accuracy and reliable operation. Monitor and document system performance, pressures, and temperatures daily to maintain environmental control within validated parameters. Troubleshoot, maintain, and support Building Management Systems (BMS/BAS) and associated automation controls. Ensure all work is properly documented in the Computerized Maintenance Management System (CMMS) and performed in full compliance with safety, quality, and regulatory requirements. We are looking for applicants with: High school diploma or equivalent required. Completion of an accredited vocational or technical training program in HVAC, Refrigeration, or Mechanical Systems strongly preferred; a combination of equivalent education and experience will also be considered. Minimum 5 years of progressive experience in commercial or industrial HVAC maintenance and repair. Experience working in FDA-regulated, GMP, or pharmaceutical/biotech manufacturing environments strongly preferred. Demonstrated expertise in HVAC system diagnostics, mechanical and electrical troubleshooting, and preventive maintenance.

Job Title: Service Technician I (1+ Years Experience) The following information provides an overview of the skills, qualities, and qualifications needed for this role. Reports To: General Manager/ Hiring Manager Location Address: 178 US-206 Hillsborough Township, NJ 08844 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU Top Pay for Top Performers, including incentive and bonus opportunities, depending on the position Up to $130,000 on average First Year Total Compensation" Total Compensation is Hourly plus Spiffs/Commissions***Depending on Center this could be more Generous PTO provided: 20 paid days off within your first year of employment (vacation & national holidays) 25 paid days off after your 2nd year of employment No layoffs during "Slow Season" - due to our extensive customer base, you will never have to worry about not being able to provide for your family year-round Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S. Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs Company-provided smart phone, tablet, uniform plan, and tool replacement program We'll make you better at what you do with our internal Training Academy Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions Company-paid employee Life Insurance with options for YOU and your Family! Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Supplemental benefit programs such as: Legal advice, pet insurance, and health advocacy programs Come join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing! Key Responsibilities: Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendance Health & Safety Roles and Responsibilities Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Qualifications: High school diploma or GED with additional training and 1+ years' experience in HVAC with technical training certification required Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver's license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. xevrcyc Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds Annual Compensation Range $55,361.28 to $69,201.60

We are looking for a skilled NOC Technician to join our team in Somerset, New Jersey, on a Contract-to-Permanent basis. This role offers a dynamic opportunity to support and maintain network operations while contributing to the reliability and efficiency of our systems. The ideal candidate will have hands-on experience in troubleshooting, installation, and maintenance of network infrastructure. Responsibilities: • Extend circuits from demarcation points to client equipment and participate in troubleshooting calls to ensure connectivity. • Perform network cable installations adhering to patch panel standards and proper labeling for copper and fiber cables. • Diagnose and resolve network issues using tools such as cable analyzers. • Manage server and network equipment lifecycle, including triaging, decommissioning, and disposal of outdated devices. • Configure settings on production servers, switch ports, and VLANs to support operational requirements. • Supervise installation teams in device setup and cable running tasks. • Implement and maintain patch panel infrastructure to meet evolving network. • Populate and maintain virtual databases documenting device and connection details. • Address troubleshooting and installation requests through an established ticketing system

Gross Weekly - $2173.00/week Blended Rate - $60.00/hr Shift - 3X12 Nights Length - 13weeks Requirements - BLS Two plus (2) + years of Neurodiagnostic/EEG technology experience. Preferred Certifications & Licensure: -ABRET - R. EEG T certification. Benefits: Pride Global offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors. About PRIDE Health is the minority-owned healthcare recruitment division of Pride Global, an integrated human capital solutions and advisory firm. With our robust and abundant travel nursing and allied health employment options across the U.S., PRIDE Health will allow you to help change the way the world lives and heals as it connects you with the industry's leading healthcare organizations.

I have a client located in Ewing Township, New Jersey, that has an opportunity for a Technical Lead - Nuclear Services. If you or any of your colleagues are interested in discussing this role, please click Apply Now. In this role, you will be working as a technical expert for a client working to grow a small nuclear services team in thermo-hydraulics and fluid structural interactions. This position will be responsible for developing, marketing, and implementing innovations to support new and existing plants/customers. This role will be supported by a dedicated business manager and a 40-year industry service base to grow the department to support an expected upturn in the industry. This position is a permanent role that is a long term need for my client. This role must be worked on-site with occasional travel requirements to visit clients. Job Requirements BS/BSE in Aeronautical Engineering, Aerospace Engineering, Mechanical Engineering, or relevant field required MS/ME or PhD preferred 10 years of experience in nuclear power generation required (less experience required for applicants with relevant advanced degrees) Possess a strong technical background and familiarity with nuclear power plant operations and nuclear quality assurance programs Background working with fluid dynamics and fluid structure interaction-- some acoustic experience is preferred Ability to effectively communicate and present to clients #VIS

Requirements Required: 1-2 years of structured cabling, data-communications wiring, or low-voltage installation experience Proficient with Cat 5e, Cat 6, and/or fiber-optic termination and testing Skilled at cable management, labeling, and documentation Confident using hand and power tools safely Comfortable working on ladders, lifts, and in tight spaces Reliable transportation and a valid driver's license Preferred: BICSI Installer or equivalent certification. Experience with coaxial cable, AV cabling, or security/access control wiring. Knowledge of PoE and network device installation. Physical Requirements Lift and carry up to 50 lbs Stand, bend, kneel, and reach for extended periods Flexible to travel to job sites across PA and NJ Work Perks We believe a great technician deserves great rewards: Competitive compensation (above industry average in Bucks County-let's talk specifics) Paid Time Off: generous vacation, plus holiday and floating time off Performance Bonuses: based on individual and company outcomes Flexible, Top-Tier Health Coverage: medical, dental, and vision plans 401(k) with Employer Match - a smart move for your future Life & Disability Insurance: tailored to fit your needs Certification Sponsorship: we'll fully reimburse approved professional development that helps you grow Magna5 Values Win Together - We collaborate with clients and across the Magna5 team to provide complete solutions for every IT challenge. Respond Fast - When clients or teammates reach out, we answer with urgency, assembling the needed expertise to provide quick and accurate resolutions. Earn Trust - We strive to earn and keep the trust of our clients and teammates through our actions every day, fulfilling every promise we make. Stay Transparent - No secrets and no surprises. We respect our clients and one another by providing candid assessments and complete, accessible information. Think Ahead - “Good enough” isn't good enough. We strive to be the best. Our team members are proactive with our problem solving and work to stay on the leading edge of new technologies that drive client success. What We DoMagna5 is a rapidly growing IT Managed Service Provider delivering cybersecurity, private and public cloud hosting, backup and disaster recovery and other advanced services from mid-market to enterprise customers nationwide, including leaders within the education, healthcare, government, financial services, manufacturing, and other industry segments. We integrate advancements in technology and processes to drive businesses forward. As a trusted managed services provider, we bring together the right mix of managed IT services, security, and network connectivity, fully managed by our team of experts 24/7/365. Our passion is to help companies function better, faster, and smarter. We offer an exciting and collaborative environment, with growth potential. For more information, visit our website at ***************

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Install and modify software and graphics. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $31.25-41.83 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: Low voltage wiring, installation, termination of building automation controllers and end-devices. Testing, commissioning and calibration of sensors, valves, dampers, etc. Troubleshooting and programming of VFD's. Programming of application specific controls such as VAV boxes and fan coils. Installation of MSTP and IP networks. Be part of the on-call rotation Provide onsite installation and repair of controls systems Experience preferred in the following: Tridium Jace Johnson FX BACnet IP, MSTP networks RTU, Chiller Plants, Boilers VAV boxes sequence of operations Microsoft Visio Required skills and strengths: Valid drivers license HVAC building automation knowledge Must be able to perform the physical requirement of the job Basic computer skills of Excel, Word, and Outlook. Five years experience with the installation and troubleshooting of building automations systems Communication skills (oral and writing) Able to read wiring diagrams and engineers drawings Able to work in a fast-paced environment Able to multi-task and focus amid distractions Good listener and a team player Detail oriented Organized, flexible and follow directions Able to work overtime when needed Work independently Job Type: Full-time

The Hiller Companies, LLC has an immediate opening for Fire Alarm Service Technician. If you are a dedicated professional with a passion for fire protection and safety, we invite you to apply today. The Hiller Companies is a leading provider of fire protection and safety solutions, dedicated to safeguarding lives and property all around the world. Headquartered in Mobile, Alabama, Hiller extends its reach globally as well as in domestic markets with offices across the United States. With over 100 years in the industry, our mission is to ensure the highest standard of safety and innovation in comprehensive fire protection services, including installation, inspection, maintenance and repair of critical fire and life safety equipment. Our team remains laser-focused on one goal - making the world a safer place. Sign-On Bonus: New hires may be eligible for a sign-on bonus based on their experience and certifications, such as NICET. The bonus amount will be determined during the hiring process and paid in two installments: the first after successfully completing 30 days of employment, and the second after completing 90 days. This bonus recognizes your qualifications and commitment during your initial months with our company. Job Summary: A Fire Alarm Service Technician is responsible for the inspection, testing, maintenance and repair of fire alarm systems in accordance with industry standards and regulations. The Fire Alarm Technician plays a critical role in safeguarding lives and property by conducting thorough and detailed inspections, performing required maintenance and providing expert advice to valued customers. Key Responsibilities: * Conduct routine inspections and testing of fire alarm components, including control panels, detectors, horns, strobes and annunciators, to verify proper operation * Prepare detailed reports documenting inspection findings, test results and any related deficiencies or non-compliance issues observed, in accordance with NFPA codes and standards * Troubleshoot system malfunctions and perform repairs as needed, identifying and resolving issues with wiring, circuitry, devices and software * Respond promptly to service calls and emergency requests, diagnosing problems and implementing solutions to restore system functionality * Conduct preventive maintenance activities, such as cleaning, calibration and battery replacement, to prolong the lifespan of fire alarm systems and prevent downtime * Document all service activities accurately and thoroughly, including inspection reports, work orders, parts usage and customer notes, using the ServiceTrade operations platform * Work closely with Deficiency Sellers to provide detailed inspection reports, material needs and other job-related notes, to prepare and deliver repair estimates in a timely manner, always ensuring customer satisfaction * Interact professionally with clients to schedule work, discuss inspection findings, address any concerns or questions and provide recommendations for system upgrades or improvements * Work closely with Service Coordinator(s) to optimize work orders, material requisitions and job scheduling, focusing on efficiency, productivity and customer satisfaction * Maintain a clean and organized work environment, always adhering to safety guidelines, protocols and procedures Qualifications What We Are Looking For: * High School Diploma or equivalent * Technical or vocational training in fire alarm systems or related field preferred * NICET Certifications strongly preferred * State specific Fire Alarm licensing preferred, or ability to acquire * Valid driver's license with a clean driving record and willingness to travel to client sites as needed * Prior experience in the installation, maintenance and repair of fire alarm systems in commercial and industrial settings * Solid understanding of fire alarm codes, standards and regulations, including NFPA 72 (National Fire Alarm and Signaling Code) and relevant building and fire codes * Proficiency in reading and interpreting blueprints, schematics and technical manuals for fire alarm equipment * Strong troubleshooting skills with the ability to diagnose and resolve complex technical issues efficiently * Excellent communication and customer service skills, with the ability to interact professionally with clients and team members * Ability to work independently with minimal supervision and as part of a team in a fast-paced environment Physical Requirements * While performing the essential functions of this job the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands or arms, stoop, kneel, crouch or crawl, and is occasionally required to lift and/or move heavy objects * Ability to lift and carry up to 50 pounds * Comfortable working in various environments, including industrial facilities, commercial buildings and outdoor settings, which can potentially expose employees to noise, dust, heat stress, thermal stress, low light conditions, heights, etc. * Capable of standing, walking, bending and kneeling for extended periods * Ability to work at heights and in confined spaces as needed, which would require use of fall protection equipment and other safety devices * Capable of using hand and power tools, including specialty tools resulting in cutting, grinding, drilling, fastening and other methods resulting in torque, vibration, noise, etc. Hiller is a drug-free workplace, an equal opportunity employer and ADA compliant. We are proud to operate according to our Core Values: Passion to Perform, Trust to Act, Act Responsibly and Make It Fun. Most employee benefits start from the first day of employment, including: * Competitive compensation package, including pay advancement opportunities for industry certifications and continuing education * Comprehensive benefits package, including health, dental & vision insurance, retirement plans, company paid & voluntary life insurance, company paid short-term disability, voluntary long-term disability, critical illness & accident insurance and paid time off * Company-provided training, tools and equipment, including $150 annual boot allowance for employees required to wear safety boots in their jobs * Career advancement potential within a growing company. Join us in our mission to provide comprehensive fire protection solutions and peace of mind to our customers and together let's make the world a safer place.

********************************************************* Do you have passion and energy? Do you have experience working with lumber and building materials? Do you have experience using a chain saw? Do you enjoy working with customers? Do you want to be part of a company that offers stability (BGS has been in business since 1931), job security, competitive pay and a robust benefits package? If yes, then we want to hear from you. If you are interested in being part of our outstanding team, we encourage you to apply. ESSENTIAL FUNCTIONS OF A BEAM CUTTER (MICROLAM TECH HELPER): Receive and inspect microlam and paralam materials from vendors. Maintain inventory log to be available to Purchasing. Cut beam, TJI and paralam to fill orders for delivery or pick up. Maintain equipment in working order. Maintain the cleanliness of the work area. Able to operate a fork lift truck as needed. Assist customers in the yard when needed. Help maintain cleanliness of the lumber yard. Assist with inventory and verify computations against physical count of stock. Other duties as requested directed or assigned. Requirements: QUALIFICATIONS OF A BEAM CUTTER (MICROLAM TECH HELPER): Previous lumber or building supplies experience strongly desired. Experience in operating a chain saw to cut materials strongly desired. Proficiency in using a tape measure to ensure accurate cuts. Fork Lift Truck Operator certification required. Solid communication skills are required. High school diploma or GED preferred. PHYSICAL DEMANDS: The position could involve standing, walking, reaching, lifting, bending, crouching, climbing, pushing, pulling and sitting for long periods of time throughout the day. Heavy lifting is required. Exposed to cold weather in the winter and hot weather in the summer. BGS is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind: BGS is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at BGS are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, family or parental status, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other status protected by the laws or regulations in the locations where we operate. BGS will not tolerate discrimination or harassment based on any of these characteristics. BGS encourages applicants of all ages. Compensation details: 18-25 Hourly Wage PI31d7d5d58337-31181-36471332

Job DescriptionWe are looking for an HVAC Technician to join our team! You will install, service, and repair heating and air conditioning systems (year-round work). Responsibilities: Diagnose, service, and repair heating, ventilation, and air conditioning systems Install new or replace HVAC equipment Perform routine preventative maintenance Respond to emergency service requests Perform seasonal start ups Qualifications: • 2+ years of experience in the commercial HVAC industry • Familiarity with HVAC wiring diagrams • Ability to handle physical workload - lifting 50+lbs • Strong problem solving and critical thinking skills • Clean and valid driver's license Medical, Dental, Vision, Company Truck w/ Gas Card, Phone Allowance, Tablet, Life Insurance, Paid Holidays/Vacation/Sick Job Type: Full-time Pay: $65,000.00 - $125,000.00 per year Benefits: Company truck Dental insurance Fuel card Health insurance Life insurance Paid time off Vision insurance Schedule: 8-10 hour shift Experience: HVAC: 2 years (Required) Ability to Commute: New York, NY (Required) Powered by JazzHR QwCC2lUPfK

Professor Gatsby's Heating & Cooling in Trenton, NJ is calling all Lead HVAC Installers / Installation Technicians to apply to join our amazing heating and air conditioning team full-time! The typical schedule for this HVAC technician position is Monday through Friday from 7 AM to 4 PM or 8 AM to 5 PM with occasional overtime. WHY YOU SHOULD JOIN OUR TEAM We are an established company that values and appreciates our employees while offering endless growth opportunities. We pay our Lead HVAC Installers / Installation Technicians a competitive wage of $30 - $50/hour, depending on experience, plus bonuses and incentives. Our team also enjoys great benefits, including health insurance, a 401(k) with company match, multiple bonus programs, paid holidays, paid vacation, paid sick days, and company parties. Plus, we make it easy to apply to this HVAC technician position with our initial quick, mobile-optimized application. If we have your attention, please continue reading about this amazing heating and air conditioning opportunity! ABOUT PROFESSOR GATSBY'S HEATING & COOLING We deliver first-rate HVAC services and products at affordable prices to Turnersville NJ and the surrounding cities including Southern Jersey, Washington Township, Sewell, Turnersville, Glassboro, Clayton, and Williamstown. Customer satisfaction is our first priority. We are the highest-rated company in the area because we take our time and do it right. Whether our residential customers need repairs to their existing heating and cooling systems or a completely new installation, we are here to meet their needs. We chose a professor for our mascot to signify accuracy, integrity, attention to detail, and expertise. Our highly trained technicians love what they do. We believe that if you don't love what you do, then you can't deliver the best service and value to your customer. Your heart must be in it. Our team focuses on continuing education so we can present our customers with the best options in the industry. We care about our team. We are growing fast and believe that if we invest in our team now, they will grow with us. We want to offer careers not just jobs. ARE YOU A GOOD FIT? We are looking for someone who is motivated to do quality work and further their career as a Lead HVAC Installer / Installation Technician. Ask yourself: Are you mechanically inclined? Do you have excellent communication skills? Are you a natural-born leader? Can you work both independently and with a team? Are you detail-oriented and organized? If so, we want to meet you! WHAT WE NEED FROM YOU We need you to install residential as well as light commercial heating and air conditioning systems. This HVAC technician position also manages the installation crew and helps with the communication of projects between our customers and our office. If you can do this and meet the following requirements, apply today to join our incredible team of HVAC technicians! 5+ years of experience Physical ability to lift 50 lbs and perform typical tasks associated with installing heating and air conditioning systems Valid driver's license and a clean driving record Previous project management experience with HVAC installations is highly desired but not required.

Job Title: HVAC Systems Controls Technician FLSA Status: Exempt This is a FULL-TIME position Air Control Concepts is more than just a collection of firms, we are a community of forward-thinking experts committed to excellence, innovation, and collaboration. With a focus on commercial HVAC representation, we bring together esteemed entities from diverse regions, each boasting decades of invaluable experience. We understand that success in the HVAC industry goes beyond individual accomplishments. That's why we believe in the power of unity and collaboration. By leveraging our collective assets, knowledge, and resources, we empower our member firms to deliver unparalleled service, safety, and efficiency to clients across healthcare, commercial, and residential sectors. Check out our website here: AIR Control Concepts | HVAC Partnerships, Growth & Support Across North America Duties and Responsibilities: At our customers' sites performing new system start-ups, airflow control system programming, coordination with project partners, and diagnosis / maintenance services. Helping build and retain customer confidence in the TKO team. Learning how to quickly assess situations and provide viable solutions. Experience and Requirements: 3 or more years of HVAC control systems experience Building Automation Experience Computer Networking experience Problem-solving skills Benefits: We offer a competitive and comprehensive benefits package, including: Health & Wellness - Medical, dental, vision, and life insurance coverage to support your well-being. Financial Security - 401(k) retirement plan with company match and short/long-term disability coverage. Work-Life Balance - Paid time off (PTO), paid holidays, and an employee assistance program (EAP). Professional Development - Ongoing training opportunities and support for continuing education AIR Control Concepts is an Equal Opportunity Employers.

Job Description Pay: $18 - $40+ hour; plus commissions/incentives! Earning potential $150K+/year based on performance Schedule: TBD Full-time, year-round work About Air Experts: Air Experts, part of the ARS family of brands, provides expert HVAC services. We serve customers in the state of New Jersey with reliable, professional service. For over 30 years, we've delivered top-tier comfort solutions, supported by ARS's national strength and a commitment to local care. What We Offer: Insurance available after 31 days Low-cost medical (as low as $5/week) Dental, vision, HSA/FSA 401(k) with company match 15 days PTO + 8 paid holidays Company-paid life insurance Take-home vehicle + gas card Uniforms + cleaning service Weekly direct deposit Responsibilities Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications What You Need: 3+ years of residential HVAC Service experience EPA certification (or ability to obtain) Valid driver's license & clean driving record Ability to enter attics, crawlspaces, and lifting heavy equipment If you have the experience we seek, APPLY NOW! Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

SAYREVILLE NJ AC & FURNACE REPAIR | TRUSTED HVAC SERVICE Yellowstone Local is proud to represent Delco Air, an industry leader in trusted HVAC service in Sayreville, NJ. Are you ready to take your HVAC career to the next level with a company that appreciates and rewards your expertise? At Delco Air, we're looking for skilled HVAC Service Technicians who want more than just another job. If you're driven, customer-focused, and ready to be part of a team that values excellence, this is the place for you. What's in it for You? Pay: $90,000 - $175,000 per year (based on experience) Sign-On Bonus & Incentives: $2,500 sign-on bonus and 3% spiffs on top Stability & Growth: Clear paths for advancement and paid training to sharpen your skills Work-Life Balance: Paid time off, paid holidays, and team outings Full Support: Uniforms, a take-home truck with a gas card, and an open-door policy Comprehensive Benefits: Medical, dental, and vision coverage, plus supplemental options Retirement Planning: 401(k) with company matching to secure your future Unique Perks: Hot breakfast on Fridays and a close-knit team atmosphere Why You'll Love It Here Delco Air is committed to creating a workplace where your hard work is noticed and your growth is prioritized. We invest in continuous education and have a supportive, family-like team culture. Join a company that values loyalty, recognizes achievements, and has fun along the way! Your New Role As a Delco Air HVAC Service Technician, you'll be the go-to expert for our residential and commercial clients, handling a range of responsibilities, including: Troubleshooting, diagnosing, and repairing HVAC systems and boilers Working independently to stay on schedule and deliver high-quality service Maintaining stock, tools, and safety equipment Communicating with dispatch for efficient scheduling Documenting system information and providing repair vs. replacement options to clients Acting as a trusted advisor, helping clients make informed HVAC decisions Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Experience: 2-5 years in HVAC service Certification: EPA certification preferred (not required) Skills: Proficiency in forced hot air and hot water systems; plumbing experience is a plus Physical: Able to lift and carry 50-75 lbs regularly Other: Valid driver's license and authorization to work in the US Delco Air is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. #red

Job Description Neil Slattery Plumbing Heating and Cooling in Farmingdale, NJ is calling all motivated HVAC Installation Techs to apply to join our amazing team full-time! WHY YOU SHOULD JOIN OUR TEAM We are a plumbing, heating, & cooling company that invests in our team and offers real opportunities for career growth. This technician position earns top pay of $20-$25 per hour, based on experience plus a sign-on bonus of $1,000. We provide our technicians with awesome benefits and perks, including paid time off, health, dental, and vision insurance, commissions and bonuses, and tuition reimbursement. We also make it easy to apply! If we have your attention, please continue reading! ABOUT NEIL SLATTERY PLUMBING, HEATING, & COOLING Neil Slattery Plumbing, Heating, & Cooling was originally founded in 1993 as a plumbing company but later expanded to include HVAC services as well. We're a growing second-generation company that serves the Monmouth and Ocean Counties. Our mission statement is to "provide our clients with exceptional services at the best value and exceed their expectations," and we take that to heart. Here at Neil Slattery, we strive for balance, so we like to have an upbeat and fun atmosphere where we also work hard and take quality service seriously. We value our team of technicians, so have weekly training to set goals and make adjustments as needed. The excellent customer service we provide wouldn't be possible without our highly skilled team, so we offer great pay and generous benefits to express our appreciation. ARE YOU A GOOD FIT? We are looking for someone who is motivated to do quality work and further their career as an HVAC Installation Tech. Ask yourself: Am I ready to gain financial and professional success? Am I proud of the work I do? Am I looking for a successful career path with a company that values me? If so, we want to meet you! WHAT WE NEED FROM YOU As an HVAC Installation Tech, you perform residential service, installations, and sales. If you can do this and meet the following requirements, apply today! 3-5+ years of residential HVAC installation experience Valid driver's license Able to pass a background check APPLY NOW Do you take responsibility for your decisions? Are you adaptable? Do you work well under pressure? Can you prioritize multiple tasks effectively? If you answered yes, apply now using our initial quick and easy mobile-optimized application. Location: 07727

We're looking for Paintless Dent Repair Technicians with a minimum of 3 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As a Mid-Level PDR Technician, you'll be expected to have experience accessing panels, use glue-pulling techniques, and repair smaller-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks - including a 401(k) with Carvana match and even a vehicle purchase discount - all while using state of the art tools in one of our high-tech Inspection Centers ( click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $22-36 Other perks of the Job 100% company-paid healthcare premiums Generous paid-time off and your birthday is a holiday! ASE and tool reimbursement programs Tuition reimbursement and student loan repayment Schedule: Required overtime is a key part of our business strategy to meet demand. We're looking for team players who are all in our mission and are able to work mandatory overtime based on our business need. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) ###-####, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). We also have a variety of other automotive roles available in one of our 18 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.