Inteplast Group jobs

TITLE: Quality Assurance Engineer POSITION OBJECTIVE: Assists the Quality Assurance and Regulatory Affairs Manager in regulatory compliant company-wide quality assurance department that provides all research, support, product development, and quality assurance functions required along with accurate specifications, service, and delivery of product to our customers. Assist the Quality Assurance and Regulatory Affairs Manager in the management of the quality assurance department to support production schedules, personnel, resources and continuous improvement efforts that achieve efficient service productivity. Assists the Quality Assurance and Regulatory Affairs Manager in the evaluation and controls to vendor reliability of goods and services. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in industrial engineering, mechanical engineering, or business from an accredited four-year college is preferred. Associate's degree or equivalent from an accredited two-year college/technical school, or higher will be considered, plus 2-4 years of quality assurance engineering experience in a medical device manufacturing environment; or equivalent combination of education and experience. Experience in Plastic Injection and/or Blow Molding is desired. Must have working knowledge of the FDA 21 CFR Part 820 Quality System Regulation. Working knowledge of ISO 13485:2016 Standard is preferred. Current certified ISO 13485:2016 Lead Auditor certificate is preferred. Computer literate in Microsoft Office suite and experience with imputing data into database systems is a must. Proficiency in SAP is a plus. Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving concrete variables in standardized situations. Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary. Capable of effectively managing job-related stress and fostering productive workplace interactions. JOB RESPONSIBILITIES: Assists the Quality Assurance and Regulatory Affairs Manager in developing and maintaining a complete, comprehensive, and compliant quality management system that supports the manufacture and sourcing of medical products in FDA product device classes I and II and Health Canada Class I; currently excluding FDA Device Class III and Health Canada Device Class II, III, IV products. Assists the Quality Assurance and Regulatory Manager with medical device company compliance to various regulatory agencies and regulations; specifically, the FDA and Health Canada: QSR and applicable cGMP's, AMMI Sterilization Standards, OSHA, EPA and other federal, state and local regulatory agencies. Assists Quality Assurance and Regulatory Affairs Manager in the compliance and maintenance of the quality management system. Provides the quality engineering function assuring that products meet their intended use through product specification, continuous evaluation, and data analysis. Provides the company-wide training in statistical techniques and quality science. Directs technical and administrative personnel engaged in quality assurance activities. Evaluates and provides for audits, corrective actions, preventive actions, and compliance verification of internal and external quality management systems and their functions. Investigates, prepares, and maintains records for customer complaints with root cause analysis along with corrective action, preventive action, and effectiveness check. Acts as a quality representative for customers and vendors. Assures validation and compliance of our medical device products through our contract sterilization facilities and our sourced medical device products sterilization facilities. Acts as a quality representative for customers and vendors. Other duties as assigned by Quality Assurance and Regulatory Affairs Manager. WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Office environment consists of a fixed or modular office that includes adequate lighting, heating/cooling, equipment and furniture in a good working condition. Must be able to work constructively and cheerfully in an environment that may be stressful due to adversarial situations, and at all times maintaining company a well as employee confidentiality. Must be able to tolerate a manufacturing environment of noise, fumes, and particulates generated from various types of plastic materials and equipment.

Job Description Petoskey Plastics is an environmentally focused recycler and plastic film, bag, and resin manufacturer dedicated to our mission statement: to earn the appreciation and respect of our customers, associates, and communities. We are looking for motivated individuals to join our career-oriented, benefits-rich team. See a few of our over 20 competitive benefits below: Medical, Prescription, Dental, and Vision benefits - valued at $4/hr over your base pay! Profit Sharing Bonuses Paid Time Off - start earning PTO just two weeks after your start date 401 Retirement Plan - with a 3% company contribution, regardless of your contribution Safety Shoe and Safety Glasses Reimbursement Tuition Reimbursement Wellness Reimbursement Life Insurance Short- and Long-Term Disability Headquartered in Petoskey, Michigan, Petoskey Plastics provides products and custom-engineered solutions for a variety of industries, including automotive, industrial, institutional, retail, construction, home improvement, medical, and more. The company has facilities in Michigan, Indiana, Tennessee, and Texas. Petoskey Plastics is here if you are looking for a family-oriented, career path-focused company. We offer paid training and several different growth opportunities. Start your career at Petoskey Plastics today! Careers - Petoskey Plastics Jobs - Jobs Plastic Industry We are seeking anexperienced blown film extrusion operatorto safely perform a combination of productions tasks, which may include set up of jobs, reading the production schedule, reading, and understanding work instructions and blueprints. Proficient at running multi-layer extrusion and downstream equipment. Assists supervisor in covering the production floor, training new associates on safety, housekeeping and other aspects of the production process. This will be an overnight position.2-2-3 shift schedule, 8p-8a,$1.00/hour shift premiumif working on the night shift! Qualifications 3 years of blown film extrusion experience preferred. Ability to read production schedule, work order, and work procedures in English. Problem solving and trouble shooting skills. Mechanical aptitude. Knowledge of resins and additives. Ability to train new associates. Commitment to quality work. Commitment to safety and quality. Follow all safety and quality policies. Able to consistently demonstrate reliable, punctual attendance. Strong interpersonal communication skills (verbal & written). High School Diploma or General Education Degree (GED) is required. You should be proficient in: Machine Building/Assembling Mechanical Troubleshooting Skills CAD Software Machine Safety Inspections Machine Setups for Production Runs Troubleshooting CNC Machines Plastic Extrusion Experience Injection Molding Experience Blow Molding Experience Tool/Die/Mold Setup Experience Blueprint Reading Machines & technologies you'll use: CNC Automation Solutions Injection Molding Machine CNC Lathe (2-4 axis) Extrusion Machine Blow Molding Machine

Job DescriptionMidsouth Steel is seeking a skilled Structural Steel Foreman to lead our team in setting up and managing the installation of structural steel. This is a full-time position working in our Nashville, TN territory. • Set up hoisting equipment for raising and placing structural steel • Fasten steel to cable of hoist, using chain, cable or rope. • Signal worker operating hoisting equipment to lift and place steel. • Place steel into position supported by hoisting device. • Verify vertical and horizontal alignment of steel, using plumb bob and level. • Bolt aligned members to keep them in position until they can be permanently bolted or welded in place."> • Detect, recognize and respond to dangerous conditions or situations."> • Regular attendance is required. • Lead crews on a day to day basis. • Perform other duties as required. Physical Requirements/Job Site Requirements: • Must be able to effectively use all required PPE equipment and lift up to fifty pounds. • Conditions include working in office, shop, busy traffic areas, warehouses and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations and adverse weather conditions. • Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as confined spaces. • Strenuous physical demands are required to safely perform the essential functions associated with this position. • Must be able to safely operate all involved equipment and tools. • Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats and working in awkward body positions. Powered by JazzHR j56eGLfXwf

TITLE: Mechanical Technician B POSITION OBJECTIVE: This position is responsible for lubrication, preventative maintenance, and repair of all equipment. Performs other duties as required. QUALIFICATIONS: Technical school or Associates degree in Industrial Maintenance or 3 years of experience in Industrial Maintenance required Have a strong background in troubleshooting and repair of hydraulic and pneumatic systems, as well as machining experience is required Basic computer knowledge Safety glasses, ear plugs, and steel toe shoes is required on some or all jobs Must have good communication skill Must be able to multi-task Must be able and willing to work overtime on an as needed basis. Must be willing to be on-call and work some nights and weekends that are required Electrical background is a plus, but not required The ability to read blueprints and mechanical drawings is a plus Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions JOB RESPONSIBILITIES: Troubleshooting, repair, and replacement of mechanical equipment Lubrication and preventative maintenance (PM) of mechanical equipment Assists Electronic technician in electrical and electronic duties Able to perform welding, machining, and millwright duties Identify parts and assist Parts Coordinator in the requisition and inventory of tools, spare parts, and equipment Assembles, and installs new mechanical equipment, enters work orders in the Maintenance Management System; able to read and interpret blueprints and mechanical drawings Maintain all equipment in good running order, perform route checks and report deficiencies. Ensure that job site is clean and free of hazards, follow GMP practices. Maintains good housekeeping and safety practices when running equipment Interacts and communicates with Production supervisor during shift and assist on production line when needed Maintains professional certifications and keeps updated on all procedures and policy changes; keeps training up to date Operates all maintenance equipment safely, follow LOTO practices. Basic use of hand and power tools. Basic knowledge of plant utility systems. Works with minimal supervision. Performs daily, weekly and monthly PM assignments. Has working knowledge of spare parts system. Works safely. Basic knowledge of rigging and lifting techniques. Basic maintenance skills including machining, welding, pipefitting and fabrication. Maintains a forklift license. Basic knowledge of pneumatics and hydraulics. Follows all safety procedures including LOTO, confined space, proper lifting, etc WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Manufacturing Environment Ability to work in varying temperatures (cold and hot) Loud noise

TITLE: Work Program/Student - Programming Intern POSITION OBJECTIVE: This person's primary responsibility is programming, coding, troubleshooting, and optimizing in house software. Secondary responsibilities include end user support, scripting, and software/system upgrades. Other responsibilities are documentation and can include some general systems related tasks. QUALIFICATIONS: Some technical training/college is preferred Knowledge in any of .Net, VB, ASP, Perl, C#, SQL, or equivalents Some experience with Linux Basic understanding of PC/server hardware/software Windows / Linux / DOS Effective written and verbal communication Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary. Capable of effectively managing job-related stress and fostering productive workplace interactions. JOB RESPONSIBILITIES: Coding, troubleshooting, and optimizing in-house software Scripting for communications, backups, and scheduled tasks MySQL statement queries and optimization Data Analysis Software documentation Logging support calls and daily tasks Informing IT Manager in a timely manner of IT related issues Special projects as directed by the IT Manager Complies with all SQF procedures Reports any food safety problems to a member of management or SQF Practitioner OTHER SKILLS / ABILITIES Attention to detail and effective communication Requires the ability to understand the rapidly changing technical environments of the information field WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Manufacturing environment Hot and Cold temperatures Loud noises

TITLE: TN - Quality Auditor (2nd Shift) POSITION OBJECTIVE: Quality Assurance Auditor will be capable of doing routine to complex quality assurance tasks. Must have excellent ability to measure and test parts to specifications, electronically record data, and initiate corrective actions as applicable. QUALIFICATIONS: A minimum of one year experience in a production/manufacturing environment is required and a Certified Quality Auditor certificate is preferred. Experience in plastic injection and/or blow molding is desired. High school graduate or equivalent, some related college preferred. Ability to read a limited number of two-and three-syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions, Ability to deal with problems involving a few concrete variables in standardized situations. Computer literate in Microsoft Office and experience with imputing data into dbases systems is a must Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary. Capable of effectively managing job-related stress and fostering productive workplace interactions. JOB RESPONSIBILITIES: Completes operational lot control procedures and forms Archives quality records and logs procedures Perform in-process product audits in a manufacturing environment, according to product specifications and procedures Create and complete 1st article inspection reports Conduct periodic process audits as requested and completes necessary documentation Assist shift personnel with quality issues and/or measurement techniques. Assist in problem resolution with customers as requested. Must be knowledgeable with startup procedures, customer specifications, cosmetics criteria, rejection report procedures, and end of run procedures Must be able to complete and close a NCMR request, the DHR procedure, the deviation procedure, how to write and stag a customer return, and how to complete pre-production approval protocols. Responsible for accurate data input into databases. Must have knowledge of blueprints applications and the use of measurement equipment. WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is very loud and requires hearing protection.

TITLE: TN - Maintenance Tech III (3rd Shift) POSITION OBJECTIVE: Repairs, adjusts, trouble shoots, and performs preventative maintenance on injection and blow molding machines used to make plastic bedside medical products. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to preform the essential functions. High school diploma or general education degree (GED), two years of college; five to ten years of experience and/or training; or equivalent combination of education and experience repairing, adjusting, trouble-shooting, and performing preventative maintenance on injection and blow molding machines. Working knowledge of Microsoft Office (including Outlook) and MPII system. Must have working knowledge of hydraulics, pneumatics and electrical systems and be able to read schematic. Must provide own working tools Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions. JOB RESPONSIBILITIES: Works closely with production supervisor to schedule maintenance operations with minimal productions delays Working knowledge of 5S Complete understanding of OEM preventative maintenance requirement Generates list of materials needed for approved projects Comprehensive knowledge of the plastic injection molding process of and press operation Observes production closely, effects changes in methods of operation to correct operating problems of equipment Investigates causes of failures of operating equipment, leads and/or assists mechanics in repair procedures and corrective measure Must have regular, reliable attendance and willing to work outside the regular schedule as required Willing to hand job stress and interact with others in the workplace WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually very loud and requires hearing protection.

TITLE: Tooling I - Apprentice, Level IV (2nd Shift) POSITION OBJECTIVE: This position requires a highly motivated individual who is willing to learn and apply acquired skills. S/he must be mechanically oriented with the ability to work with a variety of hand tools and lifting equipment. During the Apprenticeship the Apprentice will receive on the job learning and related instruction in all phases of the occupation necessary to develop the skill and proficiency of a skilled Journey worker. The Apprentice is responsible for completing all OJT and related classes as required by the Apprenticeship Training Program. The Apprentice must abide by the guidelines set forth in the Standards of Apprenticeship. The Apprentice must adhere to company policies, safety standards and good housekeeping practices. Successful completion of the Apprenticeship Training Program will result in a Certificate of Completion of Apprenticeship issued by the U.S. Department of Labor, Office of Apprenticeship. QUALIFICATIONS: Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary. Capable of effectively managing job-related stress and fostering productive workplace interactions. A high school diploma or GED equivalency is required. Applicant must provide an official transcript(s) for high school and post high school education and training. All GED records must be submitted if applicable. Applicants must submit a DD-214 to verify military training and/or experience if they are a veteran and wish to receive consideration for such training/experience. Ability to read and interpret documents in English such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to fill out simple forms. Ability to add, subtract, multiply, and divide two-digit numbers. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Must be certified/licensed by Medegen to operate material handling equipment including, but not limited to a rider jack and a sit-down forklift. Certification includes successful completion of a drug screen and proof of vision with or without corrective lenses. JOB RESPONSIBILITIES: Lathe Manuel Mill Manual Grinding (OD or Surface) Drilling Welding (Tig/Mi/Stick) Sawing Assembly/Disassembly of Tool/Mold Polishing/Fitting/Hand-working CNC (Mill or Turning) Documentation (Work Orders) WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and extreme heat. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud.

TITLE: TN - Mold Maker III (1st Shift) POSITION OBJECTIVE: Performs various mold maintenance and repair activities and continuous improvements related to the maintenance and repair of injection molds, jigs, fixtures, and related ancillary equipment. Also builds complex tooling components from standard prints using available metal working equipment. QUALIFICATIONS: High school diploma or general education degree (GED), with three to five years of related experience in the repair of plastic injection molds, some college preferred. Federal/State Certification as a Tool & Die Maker preferred Mechanical aptitude required, must have strong working knowledge of tooling, mills, lathes, etc. as well as good schematic reading skills Strong knowledge of CNC equipment, programming, software updates, surfacing, cutter paths, and DNC for new project, repairs, and new molds Strong understanding of Lean Manufacturing, 5S, Six Sigma and THM concepts Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions. JOB RESPONSIBILITIES: Cleans and services tools and components, inspects tools for damage or wear Disassembles, assembles, and troubleshoots hot manifold systems; electrical problems within the system; identifies proper sealing, expansion, flow, heater dimensions and condition, tip conditions and thermocouple conditions; determines proper voltages/resistance of all components Creates new tooling components with the use of standard metal working equipment including mills, lathes, ID/OD grinders, surface grinders, EDMs and various CNC machinery Assists with installation of machining and tool making equipment Disassembles and assembles molds, identified proper water seal and flow through molds Identifies proper cleaning techniques of all tool components and plates. Identifies mold location and safe usage of mold rack and carts Safely operates equipment and machinery in tooling repair area; must have an understanding of safety of self and others Attends internal meetings to help establish priorities and assign tasks. Instructs others, formally and informally, regarding tooling related skills and knowledge WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually very loud and requires hearing protection

TITLE: TN - Associate Supervisor (3rd Shift) Provide support to Shift Supervisor. QUALIFICATIONS: High school diploma or general education degree (GED); or up to one to two years related experience and/or training; or equivalent combination of education and experience Previous production experience is a must, preferably in an injection molding environment. The associate must have the ability to run all injection molding machines and have a strong understanding of the utility position. Working knowledge of Microsoft Office (including Outlook) Basic SAP I preferred as daily use of SAP my be required in this position. Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions JOB RESPONSIBILITIES: Remains highly visible on the shop floor, coordinating assignments of all production personnel. Assigns work locations and tasks. Responsible for proper staffing of the production lines. Schedules breaks and lunches for production personnel. Ensures that all manufacturing orders are completed on time. Ensures that all products produced meet all quality standards and customer requirements. Assists with ensuring efficient labor and machine performance is met and maintained. Oversees and participates in line clearance events and follows the 'Line Preparation and Clearance" procedure. Assists with ensuring efficient labor and machine performance is met and maintained. Coordinates problem solving / rework efforts Assists with personnel performance management issues and progressive discipline if warranted. WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Climbing, ascending or descending ladders, stairs, scaffolding, ramps, poles. Body agility is emphasized. Balancing, maintaining body equilibrium to prevent failing when walking, standing or crouching on narrow, slippery or erratically moving surfaces. Frequently lifting 5 to 25 pounds. Color, depth perception and field of vision is pertinent to requirements. Expert and proper use of lathes, drills, presses, power tools. Inside environmental conditions protected from weather conditions, not necessarily temperature conditions. Subject to loud noise, causing reason to shout in order to be heard above noise level.

TITLE: SR 2. Electric Technician The Electrical Technician is responsible for electrical, electronics, and maintenance of all equipment. Performs other duties as needed. QUALIFICATIONS: Industrial maintenance degree or similar from a state certified technical school or community college is required. Completion of a 4-year electrical apprenticeship can be substituted 10 years of experience in industrial electronics minimum is required Basic computer knowledge Must have good communication skills Experience with PLC controls and variable speed drives Must be able and willing to work overtime, weekends and evenings as needed. Also must be able to work on-call as needed Must be able to read electrical schematics The ability to read blueprints and mechanical drawings is a plus Can work with limited supervision (ie. night shift) Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions JOB RESPONSIBILITIES: All skills, knowledge and job duties of Electrical Technician Sr.I. Fill in for Electrical Supervisor as needed. Troubleshoot and repair PCs. Troubleshoot and repair PLC (S5/S7) issues. Commission micromaster drives for simple applications. Replace complex control components with new or different components. Program Sick laser scanners. Set up and replace light curtains. Replace and set up safety relays, simple drives, temperature controllers, soft starts and HMI panels. Assists Maintenance technician in the lubrication and repair of mechanical equipment Maintain all equipment in good running order Ensure that job site is clean and free of hazards Maintains good housekeeping and safety practices when running equipment Interacts and communicates with Production supervisor during shift and assist on production line when needed Maintains professional certifications and keeps updated on all procedures and policy changes; keeps training up to date Operates all maintenance equipment safely, follows LOTO procedures at all times WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Manufacturing Environment Ability to work in varying temperatures (cold and hot) Loud noise

TITLE: TN - Process Tech 1 POSITION OBJECTIVE: Responsible for the beginning set-up and/or automation processes for production, with emphasis on measures to increase productivity, efficiency and utilization. QUALIFICATIONS: High school graduate or equivalent and two years of prior plastics manufacturing experience; one year of technical training on injection molding machines and/or automation equipment preferred Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to fill out simple forms Ability to add and subtract two-digit numbers Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or scheduled form Mechanical aptitude required Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary. Capable of effectively managing job-related stress and fostering productive workplace interactions. JOB RESPONSIBILITIES: Effectively communicate with the shift Supervisor, other departments and other shifts in regard to part quality, equipment, special instructions, corrective action and productivity. Coordinate warehouse activities to maintain raw materials and outgoing pallets. Respond to machine alarms and take corrective action involving quality issues, processing and or minor machine, mold and auxiliary equipment repairs. Actively participate in Total Housekeeping Management. Provide technical assistance in maintaining expected levels of productivity in order to fulfill scheduling and quality requirements. Assist in shift operations as necessary and be proactive in contributing creative and/or innovative ideas for continuous improvement in addition to assistance with special projects as assigned. Complies with government regulations in adherence of EPA, MSDS, Lock/out-Tag/Out and all other proper safety standards Other duties as assigned. WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Inside environmental conditions protected from weather conditions, not necessarily temperature conditions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts; fumes or airborne particles and extreme heat. The employee is occasionally exposed to vibration. The noise level in this work environment is usually very loud and requires hearing protection.

Midsouth Steel is seeking a skilled Structural Steel Foreman to lead our team in setting up and managing the installation of structural steel. This is a full-time position working in our Nashville, TN territory. • Set up hoisting equipment for raising and placing structural steel • Fasten steel to cable of hoist, using chain, cable or rope. • Signal worker operating hoisting equipment to lift and place steel. • Place steel into position supported by hoisting device. • Verify vertical and horizontal alignment of steel, using plumb bob and level. • Bolt aligned members to keep them in position until they can be permanently bolted or welded in place."> • Detect, recognize and respond to dangerous conditions or situations."> • Regular attendance is required. • Lead crews on a day to day basis. • Perform other duties as required. Physical Requirements/Job Site Requirements: • Must be able to effectively use all required PPE equipment and lift up to fifty pounds. • Conditions include working in office, shop, busy traffic areas, warehouses and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations and adverse weather conditions. • Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as confined spaces. • Strenuous physical demands are required to safely perform the essential functions associated with this position. • Must be able to safely operate all involved equipment and tools. • Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats and working in awkward body positions.

Petoskey Plastics is an environmentally focused recycler and plastic film, bag, and resin manufacturer dedicated to our mission statement: to earn the appreciation and respect of our customers, associates, and communities. We are looking for motivated individuals to join our career-oriented, benefits-rich team. See a few of our over 20 competitive benefits below: Medical, Prescription, Dental, and Vision benefits - valued at $4/hr over your base pay! Profit Sharing Bonuses Paid Time Off - start earning PTO just two weeks after your start date 401 Retirement Plan - with a 3% company contribution, regardless of your contribution Safety Shoe and Safety Glasses Reimbursement Tuition Reimbursement Wellness Reimbursement Life Insurance Short- and Long-Term Disability Headquartered in Petoskey, Michigan, Petoskey Plastics provides products and custom-engineered solutions for a variety of industries, including automotive, industrial, institutional, retail, construction, home improvement, medical, and more. The company has facilities in Michigan, Indiana, Tennessee, and Texas. Petoskey Plastics is here if you are looking for a family-oriented, career path-focused company. We offer paid training and several different growth opportunities. Start your career at Petoskey Plastics today! Careers - Petoskey Plastics Jobs - Jobs Plastic Industry We are seeking anexperienced blown film extrusion operatorto safely perform a combination of productions tasks, which may include set up of jobs, reading the production schedule, reading, and understanding work instructions and blueprints. Proficient at running multi-layer extrusion and downstream equipment. Assists supervisor in covering the production floor, training new associates on safety, housekeeping and other aspects of the production process. This will be an overnight position.2-2-3 shift schedule, 8p-8a,$1.00/hour shift premiumif working on the night shift! Qualifications 3 years of blown film extrusion experience preferred. Ability to read production schedule, work order, and work procedures in English. Problem solving and trouble shooting skills. Mechanical aptitude. Knowledge of resins and additives. Ability to train new associates. Commitment to quality work. Commitment to safety and quality. Follow all safety and quality policies. Able to consistently demonstrate reliable, punctual attendance. Strong interpersonal communication skills (verbal & written). High School Diploma or General Education Degree (GED) is required. You should be proficient in: Machine Building/Assembling Mechanical Troubleshooting Skills CAD Software Machine Safety Inspections Machine Setups for Production Runs Troubleshooting CNC Machines Plastic Extrusion Experience Injection Molding Experience Blow Molding Experience Tool/Die/Mold Setup Experience Blueprint Reading Machines & technologies you'll use: CNC Automation Solutions Injection Molding Machine CNC Lathe (2-4 axis) Extrusion Machine Blow Molding Machine

TITLE: TN - Mold Maker III (3rd Shift) POSITION OBJECTIVE: Performs various mold maintenance and repair activities and continuous improvements related to the maintenance and repair of injection molds, jigs, fixtures, and related ancillary equipment. Also builds complex tooling components from standard prints using available metal working equipment. QUALIFICATIONS: High school diploma or general education degree (GED), with three to five years of related experience in the repair of plastic injection molds, some college preferred. Federal/State Certification as a Tool & Die Maker preferred Mechanical aptitude required, must have strong working knowledge of tooling, mills, lathes, etc. as well as good schematic reading skills Strong knowledge of CNC equipment, programming, software updates, surfacing, cutter paths, and DNC for new project, repairs, and new molds Strong understanding of Lean Manufacturing, 5S, Six Sigma and THM concepts Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions. JOB RESPONSIBILITIES: Cleans and services tools and components, inspects tools for damage or wear Disassembles, assembles, and troubleshoots hot manifold systems; electrical problems within the system; identifies proper sealing, expansion, flow, heater dimensions and condition, tip conditions and thermocouple conditions; determines proper voltages/resistance of all components Creates new tooling components with the use of standard metal working equipment including mills, lathes, ID/OD grinders, surface grinders, EDMs and various CNC machinery Assists with installation of machining and tool making equipment Disassembles and assembles molds, identified proper water seal and flow through molds Identifies proper cleaning techniques of all tool components and plates. Identifies mold location and safe usage of mold rack and carts Safely operates equipment and machinery in tooling repair area; must have an understanding of safety of self and others Attends internal meetings to help establish priorities and assign tasks. Instructs others, formally and informally, regarding tooling related skills and knowledge WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually very loud and requires hearing protection

TITLE: Electric Technician A The Electrical Technician is responsible for electrical, electronics, and maintenance of all equipment. Performs other duties as needed. QUALIFICATIONS: Industrial maintenance degree or similar from a state certified technical school or community college is required. Completion of a 4-year electrical apprenticeship can be substituted Must have knowledge of basic industrial electrical components - relays, timers, contactors, proximity switches, etc. Must be able to read multimeters and amp meters. A background in industrial electronics and troubleshooting is required Experience with PLC controls and variable speed drives is preferred Basic computer knowledge Must have good communication skills Experience with PLC controls and variable speed drives is preferred Must be able and willing to work overtime, weekends and evenings as needed. Also must be able to work on-call as needed Must be able to read electrical schematics The ability to read blueprints and mechanical drawings is a plus Can work with limited supervision (ie. night shift) Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions JOB RESPONSIBILITIES: All skills, knowledge and job duties of Electrical Technician B. Troubleshoot and repair A/C, D/C motors, drives and inverters. Troubleshoot and repair HVAC systems. Troubleshoot and repair fire panels and alarm systems. Correctly identify and work on any electrical cabinet in the plant. Identify and safely work on any switchgear in the plant. Replace non-programmable devices such as relays, contactors, timers, PLC i/o cards. Use soldering for repairs as needed Check and change motor rotation if needed. Replace plant lighting and ballasts. Check and replace fuses. Troubleshoot electrical circuits. Assists Maintenance technician in the lubrication and repair of mechanical equipment Maintain all equipment in good running order Ensure that job site is clean and free of hazards Maintains good housekeeping and safety practices when running equipment Interacts and communicates with Production supervisor during shift and assist on production line when needed Maintains professional certifications and keeps updated on all procedures and policy changes; keeps training up to date Operates all maintenance equipment safely, follows LOTO procedures at all times. WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Manufacturing Environment Ability to work in varying temperatures (cold and hot) Loud noise

Job Description Petoskey Plastics is an environmentally focused recycler and plastic film, bag, and resin manufacturer dedicated to our mission statement: to earn the appreciation and respect of our customers, associates, and communities. We are looking for motivated individuals to join our career-oriented, benefits-rich team. See a few of our over 20 competitive benefits below: Medical, Prescription, Dental, and Vision benefits - valued at $4/hr over your base pay! Profit Sharing Bonuses Paid Time Off - start earning PTO just two weeks after your start date 401 Retirement Plan - with a 3% company contribution, regardless of your contribution Safety Shoe and Safety Glasses Reimbursement Tuition Reimbursement Wellness Reimbursement Life Insurance Short- and Long-Term Disability Headquartered in Petoskey, Michigan, Petoskey Plastics provides products and custom-engineered solutions for a variety of industries, including automotive, industrial, institutional, retail, construction, home improvement, medical, and more. The company has facilities in Michigan, Indiana, Tennessee, and Texas. Petoskey Plastics is here if you are looking for a family-oriented, career path-focused company. We offer paid training and several different growth opportunities. Start your career at Petoskey Plastics today! Careers - Petoskey Plastics Jobs - Jobs Plastic Industry We are seeking anexperienced blown film extrusion operatorto safely perform a combination of productions tasks, which may include set up of jobs, reading the production schedule, reading, and understanding work instructions and blueprints. Proficient at running multi-layer extrusion and downstream equipment. Assists supervisor in covering the production floor, training new associates on safety, housekeeping and other aspects of the production process. This will be an overnight position.2-2-3 shift schedule, 8p-8a,$1.00/hour shift premiumif working on the night shift! Qualifications 3 years of blown film extrusion experience preferred. Ability to read production schedule, work order, and work procedures in English. Problem solving and trouble shooting skills. Mechanical aptitude. Knowledge of resins and additives. Ability to train new associates. Commitment to quality work. Commitment to safety and quality. Follow all safety and quality policies. Able to consistently demonstrate reliable, punctual attendance. Strong interpersonal communication skills (verbal & written). High School Diploma or General Education Degree (GED) is required. You should be proficient in: Machine Building/Assembling Mechanical Troubleshooting Skills CAD Software Machine Safety Inspections Machine Setups for Production Runs Troubleshooting CNC Machines Plastic Extrusion Experience Injection Molding Experience Blow Molding Experience Tool/Die/Mold Setup Experience Blueprint Reading Machines & technologies you'll use: CNC Automation Solutions Injection Molding Machine CNC Lathe (2-4 axis) Extrusion Machine Blow Molding Machine

TITLE: SR 1. Electric Technician The Electrical Technician is responsible for electrical, electronics, and maintenance of all equipment. Performs other duties as needed. QUALIFICATIONS: Industrial maintenance degree or similar from a state certified technical school or community college is required. Completion of a 4-year electrical apprenticeship can be substituted 6 years of experience in industrial electronics minimum is required Basic computer knowledge Other Skills/Abilities Must have good communication skills Experience with PLC controls and variable speed drives Must be able and willing to work overtime, weekends and evenings as needed. Also must be able to work on-call as needed Must be able to read electrical schematics The ability to read blueprints and mechanical drawings is a plus Can work with limited supervision (ie. night shift) Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions JOB RESPONSIBILITIES: All skills, knowledge and job duties of Electrical Technician A. Troubleshoot and replace micromaster, sinamatic, 6se42 and 6ra24 drives and load parameters. Troubleshoot, re-synch, repair or manually command all millroll cranes and shuttles. Troubleshoot and repair packaging cranes. Troubleshoot and manually command AGVs. Re-synch arms on primary slitter. Manually command Uteco and L3 packing conveyor systems. Be able to replace complex control units with correct part. Replace and configure temperature controllers, soft starts, Sick lasers, Atlas arm nodes, and Berger Lahr units. Effectively troubleshoot Profibus communication issues not involving PLC. Correct all issues with equipment following power outages. Replace brushes on DC motors. Connect and be able to reverse servo motors. Check, repair or replace cables on slitters. Pull wire and run conduit for new installations of electrical equipment. Train and instruct others on troubleshooting equipment. Assists Maintenance technician in the lubrication and repair of mechanical equipment Maintain all equipment in good running order Ensure that job site is clean and free of hazards Maintains good housekeeping and safety practices when running equipment Interacts and communicates with Production supervisor during shift and assist on production line when needed Maintains professional certifications and keeps updated on all procedures and policy changes; keeps training up to date Operates all maintenance equipment safely, follows LOTO procedures at all times WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Manufacturing Environment Ability to work in varying temperatures (cold and hot) Loud noise

TITLE: Electric Technician B POSITION OBJECTIVE:The Electrical Technician is responsible for electrical, electronics, and maintenance of all equipment. Performs other duties as needed. QUALIFICATIONS: Industrial maintenance degree or similar from a state certified technical school or community college is required. Completion of a 4-year electrical apprenticeship can be substituted Must have knowledge of basic industrial electrical components - relays, timers, contactors, proximity switches, etc. Must be able to read multimeters and amp meters. A background in industrial electronics and troubleshooting is required Experience with PLC controls and variable speed drives is preferred Basic computer knowledge Must have good communication skills Experience with PLC controls and variable speed drives is preferred Must be able and willing to work overtime, weekends and evenings as needed. Also must be able to work on-call as needed Must be able to read electrical schematics The ability to read blueprints and mechanical drawings is a plus Can work with limited supervision (ie. night shift) Ensure consistent, dependable attendance and demonstrate a willingness to accommodate non-standard work hours as necessary Capable of effectively managing job-related stress and fostering productive workplace interactions JOB RESPONSIBILITIES: Troubleshooting, repair, and replacement of basic electrical/electronic equipment including motor start-stop circuits and 24V-700 V electrical circuits. Performs preventative maintenance (PM) of electrical and mechanical equipment Assist Parts Coordinator in the requisition and inventory of tools, spare parts and equipment. Assists Maintenance technician in the lubrication and repair of mechanical equipment Maintain all equipment in good running order Ensure that job site is clean and free of hazards Maintains good housekeeping and safety practices when running equipment Interacts and communicates with Production supervisor during shift and assist on production line when needed Maintains professional certifications and keeps updated on all procedures and policy changes; keeps training up to date Operates all maintenance equipment safely, follows LOTO procedures at all times. WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION: Manufacturing Environment Ability to work in varying temperatures (cold and hot) Loud noise