Interior designer jobs in Greenville, SC

The purpose of this position is to provide essential technical knowledge and perform design work as described below. This position serves as an Area Lead Designer or staff designer performing assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer or Design Supervisor, serve as an Area Lead Designer providing guidance and supervision to designers Prepare and check designs of advanced complexity utilizing 3D modeling and 2D computer aided drafting and design automation tools Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost and schedule baselines Perform bulk material take-off analysis and tabulations Provide technical support to activities associated with equipment and material procurement and subcontracting including review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests for information and field changes Other duties as assigned Basic Job Requirements U.S. Citizenship required Associate degree in related technical field of study and minimum fifteen years of work related experience Working knowledge of applicable federal including Department of Energy orders state and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management coworkers clients vendors and subcontractors Job related technical knowledge necessary to complete the job Advanced knowledge of discipline codes and standards Ability to perform work in compliance with applicable local state and federal codes statutes and guidelines Ability to attend to detail and work in a time conscious and time effective manner Intermediate computer and software skills to include proficiency in the use of word processing e-mail spreadsheet and electronic presentation programs Significant experience providing engineering procurement and construction services on large industrial projects Proficiency executing large engineering projects utilizing 3D modeling and 2D CADD automation tools in a multi discipline environment Discipline Specific Job Requirements Read interpret and generate design drawings with minimal input from a member of the engineering staff Prepare 3D layouts and or schematics for conceptual and detailed designs of advanced complexity Background and experience must include drafting and designer experience in engineering fields such as piping electrical mechanical structural communications architectural fire protection or civil Proficiency in computer aided design utilizing Bentley MicroStation with demonstrated experience to originate and produce drawings with minimum supervision required Proficiency in 3D modeling using Intergraph Smart3D with minimum 3 years of experience Produce and check complex piping drawings including plot plans piping plans isometrics and sketches Provide assistance to construction and pipe fabrication personnel Preferred Qualifications Experience with design of systems structures and components for nuclear facilities under the requirements of ASME NQA-1 Knowledge of commercial availability and cost of materials Practical field experience EPC project experience for the following industries U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing pharmaceutical or biotechnology Knowledge of piping components commercial availability and cost of materials Working knowledge of and ability to interpret Piping and Instrumentation Diagram other discipline drawings and vendor equipment documentation Advanced knowledge of Intergraph SmartPlant Review software Advanced knowledge of piping design requirements including equipment arrangement piping layout stress requirements and material requirements Working knowledge of and ability to interpret Piping and Instrumentation Diagram update master P and ID and pipe line list About our Company DataSoft Technologies is a highly recognized provider of professional IT Consulting services in the US. Founded in 1994, DataSoft Technologies, Inc. provides staff augmentation services for Information Technology and Automotive Services. Our team member benefits include: Paid Holidays/Paid Time Off (PTO) Medical/Dental Insurance Vision Insurance Short Term/Long Term Disability Life Insurance 401 (K)

The purpose of this position is to provide essential technical knowledge and perform design work as described below. This position serves as an Area Lead Designer or staff designer performing assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer or Design Supervisor, serve as an Area Lead Designer providing guidance/supervision to designers Prepare and check designs of advanced complexity utilizing 3D modeling and 2D computer- aided drafting and design (CADD) automation tools Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost and schedule baselines Perform bulk material take-off analysis and tabulations Provide technical support to activities associated with equipment and material procurement and subcontracting including review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes EDUCATION REQUIREMENTS Associate degree in related technical field of study and minimum fifteen (15) years of work- related experience MINIMUM QUALIFICATIONS Candidate must be a U.S. Citizen. Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards. Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors. Job related technical knowledge necessary to complete the job. Advanced knowledge of discipline codes and standards. Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines. Ability to attend to detail and work in a time-conscious and time-effective manner. Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs. Significant experience providing engineering, procurement and construction (EPC) services on large industrial projects. Proficiency executing large engineering projects utilizing 3D modeling and 2D CADD automation tools in a multi-discipline environment. Background and experience must include drafting/ designer experience in engineering fields, such as electrical, instrumentation and control or communications. Proficiency in computer aided design (Bentley MicroStation) with demonstrated experience to originate and produce drawings with minimum supervision required. Proficiency in 3D modeling using Intergraph Smart3D (S3D). Ability to walk down field systems with minimal guidance, interpret field direction, generate minor design details, create new drawings, modify existing drawings, and direct junior drafters. Perform advanced design calculations (lighting, raceway sizing and wire sizing, voltage drop, cable pulling, panel board and breaker sizing, and junction box sizing). Ability to work in a diverse work environment. Satisfactory results of a pre-employment screening, which includes a background check and drug screening. Desired Qualifications Knowledge of commercial availability and cost of materials Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1 Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Advanced knowledge of: Intergraph SmartPlant Electrical software Intergraph SmartPlant Review software Electrical design requirements (grounding/earthing, lighting, wiring, motors, conduit fill and sizing, panelboards, and hazardous locations) LOCATION Position will be 100% onsite in Greenville, SC. (Local candidates or willing to relocate at the candidate's expense). PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. CONTRACT DURATIONOne (1) year with the possibility of extension/conversion.

Piping Principal Designer The purpose of this position is to provide essential technical knowledge and perform design work as described below. This position serves as an Area Lead Designer or staff designer performing assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer or Design Supervisor, serve as an Area Lead Designer providing guidance/supervision to designers Prepare and check designs of advanced complexity utilizing 3D modeling and 2D computer-aided drafting and design (CADD) automation tools Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost and schedule baselines Perform bulk material take-off analysis and tabulations Provide technical support to activities associated with equipment and material procurement and subcontracting including review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes Other duties as assigned Basic Job Requirements U.S. Citizenship required Associate degree in related technical field of study and minimum fifteen (15) years of work-related experience Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors Job related technical knowledge necessary to complete the job Advanced knowledge of discipline codes and standards Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines Ability to attend to detail and work in a time-conscious and time-effective manner Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs Significant experience providing engineering, procurement and construction (EPC) services on large industrial projects Proficiency executing large engineering projects utilizing 3D modeling and 2D CADD automation tools in a multi-discipline environment Discipline Specific Job Requirements Read, interpret, and generate design drawings with minimal input from a member of the engineering staff Prepare 3D layouts and/or schematics for conceptual and detailed designs of advanced complexity Background and experience must include drafting/designer experience in engineering fields, such as piping, electrical, mechanical, structural, communications, architectural, fire protection or civil Proficiency in computer aided design utilizing Bentley MicroStation with demonstrated experience to originate and produce drawings with minimum supervision required Proficiency in 3D modeling using Intergraph Smart3D (S3D) with minimum 3 years of experience Produce and check complex piping drawings including plot plans, piping plans, isometrics and sketches Provide assistance to construction and pipe fabrication personnel Preferred Qualifications Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1 Knowledge of commercial availability and cost of materials Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Knowledge of piping components, commercial availability and cost of materials Working knowledge of and ability to interpret Piping and Instrumentation Diagram (P&ID), other discipline drawings and vendor equipment documentation Advanced knowledge of: Intergraph SmartPlant Review software Piping design requirements (equipment arrangement, piping layout, stress requirements, and material requirements) Working knowledge of and ability to interpret Piping and Instrumentation Diagram (P&ID), update master P&ID and pipe line list ___________________________________________________________________________________________________________________________________________________________ ???? Why Join iParametrics? At iParametrics, we deliver mission-critical solutions that impact national security, infrastructure, and emergency management. Our work spans all 50 states, U.S. territories, and 39 countries, supporting federal and private sector clients for over 20 years. ???? Perks & Benefits: ???? Medical, dental, and vision coverage ???? 401(k) with company match ???? Paid time off & holidays ???? Competitive salary (bi-weekly pay, DOE) iParametrics delivers a variety of mission-critical management and support services for construction, emergency management, homeland security, risk management, and other programs to commercial and public sector clients. We were founded in 2003 and are based in metro Atlanta, Georgia, with staff and project offices nationwide. For over 20 years, we have provided guidance and expertise to help our clients confidently navigate the most challenging and complex issues relating to the safety and security of their people, assets, and operations. This includes technical and programmatic support of complex critical infrastructure programs in 39 countries, all 50 states, and 3 US Territories. iParametrics is an Equal Opportunity Employer. We are committed to a work environment that supports and respects all individuals without discrimination based on race, color, religion, national origin, age, sex, pregnancy, marital status, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Application review will consider without limitation the following criteria: qualifications, education, and experience specific to the /duties as well as prior experience with leading construction companies. Applicants must be able to pass the iParametrics Drug and Alcohol test. This job description is intended to outline the general nature and level of work that would be performed by project team members. It is not designed to cover or contain a comprehensive list of all responsibilities, duties, or skills required for this job. This description is subject to change at the discretion of the company, with or without notice.

CIVIL DESIGN INTERN Thomas & Hutton is a growing, well-established civil engineering firm providing consulting services throughout the southeast. We are an award-winning company that has been recognized as one of the best places to work in Georgia and South Carolina. Some of our many services include Civil, Environmental, Structural and Marine Engineering; Land Surveying; Land Planning; Landscape Architecture; Geographic Information Systems and Construction Administration. Thomas & Hutton is seeking enthusiastic and driven candidates for Summer Internships in our Civil Site Design Department. Candidates must be in either their sophomore, junior, or senior year in pursuit of a civil engineering degree at an ABET accredited program. Previous internship experience with a civil design firm as well as knowledge of AutoCAD Civil 3D a plus. Strong written and verbal communication skills required. Thomas & Hutton's Interns will gain exposure to a wide range of technical and field opportunities by supporting project teams on various tasks. Interns learn business use of AutoCAD Civil 3D, and will assist in preparing site design plans. Paid 40 hour per week internships begin in May 2026 and end in August 2026. Relocation and Housing are not provided. Please note, this is not a structural internship. Please note, sponsorship is not available for this position. Thomas & Hutton is a Drug-Free Workplace & E-Verify Participant Thomas & Hutton's Mission Statement, “Relationships and Solutions for Success” describes not only our unwavering commitment to clients but also our commitment to the success, both professionally and personally, of our employees. Thomas & Hutton was named to the Best Places to Work in South Carolina and Georgia by SCBIZ and Georgia Trend, and named One of the best Civil Engineering firms to work for by CE News/Zweig White. What makes Thomas & Hutton a great place to work? Opportunities for professional development, strong benefits and compensation packages, a commitment to make our communities better for future generations, a family-oriented culture, and our reputation as a firm with extremely knowledgeable professionals who serve as trusted advisors to our clients. Visit *********************** to learn more. We are an equal opportunity employer. Qualified minorities, women, veterans and individuals with disabilities are encouraged to apply. If you want to view the EEO is the Law poster, please choose your language: English - Spanish - Arabic - Chinese

As a member of Garver's growing Water Design Center in Greenville, SC, the Building Information Modeling (BIM) Designer will be responsible for developing and detailing Revit 3D models for Garver's Water Design Center. The BIM Technician will collaborate with engineers, designers, and BIM technicians to produce drawings and manage workload on various Water Business Line projects. This role in the Water Design Center is one that is central to project delivery through our many offices and utilizes the latest BIM technology, predominantly Revit software. Typical projects in design include process mechanical, structural, building mechanical, and architectural designs for water and wastewater treatment plants. Primary responsibilities of the BIM Designer will include: Developing 3D BIM Revit models with a great deal of autonomy Processing point cloud data, creating plans, sections, and details in Revit software, producing construction drawings Working as team player with a group of technicians and designers of various levels and disciplines (process, structural, mechanical, and electrical) along with Project Leaders and design teams to execute projects and developed detailed design drawings. Arranging necessary resources for file sharing and communication to effectively share design files across the company or with clients, sub consultants, and contractors; Maintaining strong communication with engineers and project managers to ensure timely delivery of projects and avoid any potential project conflicts Quality program compliance, including QA/QC to ensure all projects adhere to company standards Due to the collaborative nature of coordination using BIM tools, candidates must have the ability to seek out and resolve issues through close interaction with other project team members. In addition, the candidate must be able to maintain a positive team attitude and interpersonal effectiveness to foster and maintain an efficient and productive BIM team. About Garver's Greenville Water Design Center: The Greenville Water Design Center will be a knowledge-based hub that excels in highly technical, multi-discipline water and wastewater designs for clients in Garver's eastern footprint, as well as across the country as necessary. The Greenville WDC will specialize in large, high-volume, custom treatment plant projects with conventional and advanced technologies. A centralized WDC requires constant communication, coordination, and participation with team members. This integral working relationship benefits the client through project delivery schedule and design quality, as well as the engineer's opportunity for team collaboration and professional growth. Requirements: 3+ years of computer aided drafting and design experience with an architectural and/or engineering design team High school diploma or equivalent Experience in the use of BIM software (Revit) Experience using MSOffice products, including Excel, Outlook, and Word General understanding of various building types Experience with multi-discipline CAD designs (i.e. piping, structural, electrical, I&C, controls, mechanical, HVAC, process) Experience with water/wastewater. architectural, industrial, or commercial designs Preferred Skills: Understanding of water or wastewater treatment specific equipment Experience using Bluebeam software Experience with file sharing protocols and other methods of file transfer Good communication and training skills (verbal and written) Associate degree or higher with a focus on CAD/BIM Experience with point clouds and point cloud processing with ReCap Experience with BIM360 file sharing software Grow With Us Garver offers its employees programs such as company-paid professional memberships, company support for industry licenses and continuing education opportunities that foster a progressive atmosphere. Garver provides the tools, resources, and environment to develop leaders, stimulate ideas, and accomplish projects. By offering highly competitive salary packages, attractive benefits, and a comprehensive wellness program; Garver walks the talk when it comes to work-life balance. Founded in 1919, Garver is an employee-owned engineering, planning, and environmental services firm focused on aviation, transportation, buildings, federal, water and wastewater services; surveying; advisory services; and construction engineering and inspection. In the top 100 of Engineering News-Record's Top 500 Design Firms list, with more than 1,400 employees, Garver provides an exceptional level of client service that reflects our people-first culture, which has achieved Zweig Group Best Firm to Work For Legacy Status. Learn how Garver invests in people and places they call home at GarverUSA.com. Garver is committed to providing equal employment opportunities to all applicants and employees. Our employment practices are based upon an individual's capabilities and qualifications without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other category protected by law. #LI-ED1

Our vision is simple. In our commitment to the Southeast, we create architecture that enriches community through a culture of design excellence and expertise, innovation and collaborative engagement. What sets us apart is our unwavering commitment to creating spaces that enrich communities with lasting impact. Our projects are driven by a deep understanding of local culture, needs, and aspirations, resulting in designs that resonate with and enhance the communities they serve. At LS3P, we don't just design buildings; we create iconic landmarks that define skylines, inspire people, and transform spaces. Join us in shaping the future of architecture and design in the Southeast! We are currently seeking an ambitious Interior Design Intern to join our Greenville office. You are passionate about customer service to our internal team; detail-oriented; efficient; devoted to quality output; able to work independently, as well as in a team environment; possess the organizational skills to prioritize tasks and handle multiple deadlines; and have excellent communication skills. A Day in the Life: Work side by side in a team environment with our Design Leaders, Project Managers, Architects, Interior Designers, Urban Planners and Emerging Professionals on active production projects Discover your areas of interest and work with talented mentors Apply your educational experience in a dynamic professional design setting Gain exposure to projects across sectors, markets, offices and the firm Participate in community service and outreach occasions supporting local and national organizations Your Strengths as an Intern: Technical production skills and a demonstrated ability to effectively produce design and construction documents Proficiency in Revit is preferred Working knowledge of Lumion, Enscape, and the Adobe Creative Suite is a plus Understanding of relevant codes such as state building codes, ANSI 117.1, BOMA Possession of a strong moral and ethical responsibility to the principles of sustainability Strong organization, multi-tasking and time management skills Strong design, graphic, and presentation skills Understanding of the design and procurement processes Ability to direct and motivate work efforts of others and handle project challenges What You Bring To The Table: Pursuing a Bachelor's Degree or Master's Degree in Interior Design or equivalent field of study A cover letter, resume and portfolio demonstrating Revit skills and rendering abilities are required. Life at LS3P Together, we are building the skylines of the Southeast. Our values articulate our beliefs and ground us in a common culture. They are the core of our practice, and reflect the “who” of our community. EXCELLENCE is a beginning point INTEGRITY is at the core of our decision making and actions EMPOWERMENT with accountability makes better decisions COLLABORATION leverages the best in everyone BALANCE gives us fuel to do our best STEWARDSHIP ensures a future CARING for each other is what holds us together We are made up of 12 offices that celebrate their own unique traditions, but we embrace a “one firm” attitude that unifies us. LS3P's Commitment To You: Ongoing engagement with fantastic design team members To develop new skills and contribute to world-class projects Participate in meaningful collaboration and research efforts A competitive compensation and benefits package Professional development allowance to toward educational opportunities Leadership development and mentoring across sectors, markets, offices and the firm Participation in community service and outreach occasions supporting local and national organizations Flexibility and balance in your schedule LS3P recognizes the value of diversity and inclusion in our workplace. We are committed to equal opportunity and believe that inclusivity benefits us all. We actively seek and consider all qualified employment applications without regard to race, color, religion, gender, age, national origin, disability, sexual orientation, sexual preference, partnership status, gender identity, pregnancy, childbirth, or related medical conditions and protected veteran status, status of participation in the U.S. Armed Services, or any other status protected by federal, state or local law.

Kitchen Designers at The Home Depot help customers turn their kitchen and bath dreams into reality. Kitchen Designers greet and engage customers, listen to their needs, and guide them through the design process-offering "good, better, best" options, samples to take home, and expert advice on products, services, and installation. Kitchen Designers use design tools and showroom resources to educate customers, set clear expectations, and provide tailored solutions for every project, whether they're DIYers or working with professionals. Kitchen Designers advocate for customers by highlighting current promotions, financing options, and the advantages of choosing Home Depot over competitors. Kitchen Designers also ensure the showroom is clean, organized, and well-stocked, creating a welcoming and safe shopping environment. Throughout each project, Kitchen Designers follow up on project statuses, address questions, and guide customers every step of the way. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Benefits: Employee discounts Free uniforms Benefits/Perks: Commission-Based Pay Paid Training Bonus Opportunities Uniforms Provided Up Closets, a leading provider of custom closet solutions is seeking a skilled closet designer/consultant to join our team. We are looking for someone passionate about creating functional and beautiful spaces that meet each client's unique needs. Requirements: Minimum of 2 years of experience in closet design or a related field (preferred) Proficiency in technology and ability to understand software Excellent communication and interpersonal skills Strong organizational and time-management skills Valid driver's license and reliable transportation Ability to work independently and as part of a team Detail-oriented with a focus on quality and customer satisfaction Qualifications: Knowledge of construction materials and techniques Experience in sales or customer service is a plus Responsibilities: Meet with clients to understand their storage needs and preferences Design custom closet systems using our software Provide estimates and proposals for custom closet systems Collaborate with the installation team to ensure accurate and efficient installation Ensure high-quality workmanship and attention to detail Provide exceptional customer service and communication throughout the design and installation process Maintain a safe and organized work environment Follow company policies and procedures related to design and customer service Compensation: $30,000.00 - $80,000.00 per year At Up Closets, we are more than just a custom closet design company - we are a tight-knit family of creative visionaries, builders, and dreamers who are passionate about transforming spaces and careers. Our story is one of innovation, growth, and commitment to excellence, and we're looking for exceptional individuals to join our team and be part of our exciting journey. If you're looking for more than just a job - if you want a fulfilling career that allows you to express your creativity and make a meaningful impact - then Up Closets is the place for you. We invite you to explore our career opportunities and become part of our dynamic team of closet space creators. Together, we'll shape the future of custom closet design. Welcome to Up Closets - where your career can truly reach new heights. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Up Closet.

Job Description Precast Revit Designers are responsible to: Develop and maintain structural Revit models for precast concrete and other structural projects. Create and modify Revit families, including custom and special connection details. Collaborate with engineers and the firm's Revit champion to ensure models meet design intent and project standards. Prepare detailed shop drawings and coordination models for precast and structural components. Participate in model coordination meetings and assist with clash detection and resolution. Utilize Autodesk Construction Cloud (ACC) for project collaboration, model sharing, and version control. Support project teams with Revit troubleshooting and best practices. Coordinate with clients, external consultants, contractors, and project teams to ensure accurate and timely deliverables. Assist in the continuous improvement of BIM standards and workflows within the Precast division. Qualifications: 3-10 years of professional Revit design experience Structural experience required; precast concrete design industry experience a plus Proficiency in AutoDesk Revit modeling software Experience with Autodesk Construction Cloud (ACC) required Strong understanding of structural drafting standards and practices Ability to work collaboratively in a team-oriented environment Proven ability to work on multiple projects in a fast-paced environment Self-motivated and proactive Excellent communication skills Strong computer skills in Microsoft Word, Excel and Outlook

Job DescriptionDescription: The EWP Design Assistant supports the design team by preparing layouts, performing takeoffs, and assisting with the preparation of engineered wood product (EWP) drawings and material lists. This role works closely with designers, sales, and production teams to ensure accurate designs that meet structural requirements and customer specifications. Key Responsibilities Assist designers in preparing floor and roof layouts using specialized EWP design software. Perform material take-offs and assist with pricing and quoting packages. Review architectural and structural plans to ensure design accuracy. Generate preliminary layouts and shop drawings under the supervision of the design team. Prepare and maintain organized job files, drawings, and supporting documents. Communicate with sales representatives, builders, and contractors to clarify design details when needed. Assist in resolving design or field issues in collaboration with the design team. Support production with accurate cut lists and layout instructions. Ensure all designs comply with building codes, structural standards, and company guidelines. Provide general administrative and technical support to the EWP design department. Requirements: Qualifications High school diploma or equivalent required; associate's degree or coursework in drafting, engineering, or construction technology preferred. Basic knowledge of construction, structural components, and building materials. Familiarity with CAD or EWP design software (e.g., MiTek, BC Framer, or similar) is a plus. Strong math and analytical skills. Ability to read and interpret blueprints and construction documents. Detail-oriented with strong organizational skills. Good communication skills and ability to work in a team environment. Proficiency in Microsoft Office (Excel, Word, Outlook). Physical Requirements Ability to remain in a seated position using a computer for extended periods. Occasional lifting of up to 25 lbs. (job files, plans, etc.).

Temp Job Summary: The Designer III (DT III) position is the third level in the Designer career track. This career track is tasked with providing designs for utility systems including but not limited to: Overhead and underground circuits for joint use, lighting, and commercial, industrial and residential development and gas and generation systems. This track is also responsible for field data collection and assists with storm restoration when requested. This role involves handling moderately complex design projects and providing support to others for more complex projects with more independence than the DT II. The DT III will have interactions with clients/customers and construction crews to progress their projects. This position primarily involves working in an office environment. There is an expectation of significant field work, which may include exposure to inclement weather conditions such as extreme heat/cold, high humidity, rain, snow and icy conditions. Key Technical Skills Required: Your key responsibilities include: ·Independently performing field data collection and project-specific inspections for moderately complex projects, accurately and efficiently. ·Producing high-quality computer-aided design drawings and a list of materials needed for the construction of simple projects and providing support required by supervision for more complex tasks. ·Ensuring all necessary communications are documented on projects designed as required by training. ·Providing guidance and training to peers and newer designers for simple projects. ·Producing permitting documentation, as needed, independently. ·Demonstrating the ability to communicate with clients and participating in site meetings with oversight. This role will work independently, but under supervision for mentorship, guidance and training. Education and/or Work Experience Required: High School Diploma or equivalent, and four years relevant work experience, or an Associate's Degree and three year of relevant work experience. : Valid driver's license. Work Environment: The work environment for this position involves a mix of office-based tasks and fieldwork. This position will support engineering projects by collecting desktop and field data to perform planning, design, and project management tasks. This position may also require visits to construction or project sites to collect measurements, take photos, talk with stakeholders, and observe project conditions, and learn about field operations. Noise Level: The office environment is typically quiet to moderate but include adjacent, occupied work spaces, while field visits may expose the intern to moderate to loud noise levels, especially in active construction areas. Work Sites: During site visits, the employee may be exposed to various outdoor conditions, including weather, uneven terrain, utility components, tools and measurement devices and active construction environments. KCI will provide necessary safety equipment (PPE), such as hard hats, safety vests, gloves, and ear protection, which must be worn as required. Employees are responsible for supplying their own protective footwear and appropriate attire for the assigned tasks. Physical Demands: The physical demands described here are representative of those that must be met by the employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Mobility: The employee will spend a good portion of their time seated in an office environment working on a computer. However, they will be required to stand, walk, and move across construction sites, outdoor public areas, utility equipment areas or other project areas during site visits. Manual Dexterity: Frequent use of hands and fingers is necessary for drafting, writing reports, and using computers. The employee may also handle physical documents and work with small tools during field tasks including a measuring stick that extended to 35' touching utility systems. Lifting Requirements: Minimal lifting is required, but occasionally the employee may be required to lift and/or move up to 35 lbs. Visual and Auditory Requirements: The employee must be able to read and interpret engineering plans, blueprints, and technical documents. Strong verbal and written communication skills are essential for interactions with team members and on-site personnel. The job description is not designed to contain a complete listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time. * Essential functions are the basic job duties that an employee must be able to perform, with or without reasonable accommodation. Factors to consider in determining if a function is essential include: whether the reason the position exists is to perform that function, the number of other employees available to perform the function or among whom the performance of the function can be distributed, and the degree of expertise or skill required to perform the function.

Founded in 1972, GBS operates locations in North and South Carolina, including its custom millwork division, distributing specialty building products to customers in the Carolinas and parts of Georgia. . The Kitchen and Bath Designer will work in a retail environment with customers and builders to assist with the design and product selection process. This position will also follow up with customers and builders to ensure the job is completed in a timely manner. The Kitchen & Bath Designer must also posses an extensive knowledge of the products they represent and the ability to serve their client's needs. This position will also solicit new accounts and make job site visits. What you will do Solicit new accounts, conduct job site visits, and prospect for new projects Greet clients to the design center, assess clients needs and assist the customer with product selection and order appropriate materials and quantities for the projects Conduct pre-construction site inspections and measurements Perform automated design capability within stock and semi custom product categories Conduct bid and prep proposal functions Order project materials Arrange project schedules, sub contractor schedules and material deliveries Act as the liaison between the customer, materials vendors and subcontractors Review assigned accounts to ensure payments and credits are processed in an accurate and timely manner Maintain current knowledge of daily and monthly sales and their relationship to margin goals Understand all aspects of customer billing cycle, cash vs. credit, and how to figure and process a deposit by having a thorough knowledge of the paperwork flow and distribution process Must posses the necessary knowledge to be able to explain the differences in cabinet lines to customers Have a broad knowledge of all other items sold, various countertop products, cultured marble, sinks, faucets, etc. Basic knowledge of cabinet design software, order entry of industry related software, Microsoft Outlook, Word and Excel Maintain an active file of new and existing customers Insure all vendor literature is maintained and presented or stored in a clean, neat fashion Coordinate the delivery to contractor-remodeler customers on an as needed basis Maintain a clean, neat, professional looking show room Participate in semi-annual inventory Know the pricing multipliers and current lead times for all cabinet lines, countertop fabricators, and all miscellaneous products available Understand the receiving process and the paperwork associated with the process. Call vendors to follow up on any backordered items Know the warranty policies of all items sold. Be able to order such items when requested by customer. Complies with Company's attendance policy by maintaining regular and predictable attendance. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adheres to Company's commitment to workplace safety. Education Qualifications 60 hours of NKBA professional development programming or equivalent technical degree preferred. Experience Qualifications 3-7 years of Kitchen & Bath industry experience required. Skills and Abilities Advanced computer-aided drafting skills, salesmanship, good verbal communication skills and design presentation skills. Advanced knowledge of kitchen and bathroom design, general knowledge in all aspects of design and construction and of building materials Licenses and Certifications Maintain a valid driver's license to operate a motor vehicle in the state of sales activity required. . GBS Building Supply , a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

SUMMARY. Primary responsibility is to Take Excellent Care Of Our Customers by satisfying each customer's needs and exceeding their expectations. This requires a defined level of product knowledge, floral care and handling skills, sales ability, customer relations skills, and cooperation with fellow associates to create An Incredible Place To Work and Shop. Designs and fashions live, cut, dried, and artificial floral and foliar arrangements for events such as holidays, anniversaries, weddings, parties, and funerals. Responsible for processing/packaging/stocking/maintaining floral products according to standards, cleaning work areas, providing customer service unloading stock, and reloading salvage. Customers are among Harris Teeter's most valuable assets. Every associate represents Harris Teeter to our customers and the public. The way associates perform their jobs presents an image of the entire Company. Customers judge Harris Teeter by how they are treated each time they have contact with an associate. Therefore, one of the top business priorities is to assist any customer or potential customer. Nothing is more important than being courteous, friendly, helpful, and prompt in the attention given to customers. Harris Teeter will provide training to all associates who have extensive customer contact. If a customer wishes to make a specific comment or complaint that you cannot resolve, you are required to direct that person to the department manager or manager-on-duty for appropriate action. Remember that all contacts with the public in person, over the telephone, and through any communication reflect not only on an individual associate but on Harris Teeter as a whole. Positive customer relations will not only enhance the public's image of Harris Teeter, but also pay off in greater customer loyalty and increased sales and profit. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES include the following. Other duties may be assigned. CUSTOMER SERVICE Initiate interaction with customers on the sales floor. Ask the customers questions regarding their shopping needs. Provide customers information needed to meet their taste and meal requirements. Follow through on customer requests. Your job performance is required to demonstrate the highest level of customer service. Never be rude to a customer under any circumstance. Follow through on customer requests. If you cannot say "yes" to a customer's request, bring in department management or the manager-on-duty. Never turn down business. Make eye contact with and smile at every customer. Speak to customers in a genuine, clear, and enthusiastic manner and ask if they found everything they were looking for. Reflect an appropriate business image to customers and visitors. How you dress, your grooming and personal cleanliness standards all contribute to that image and also to the morale of your fellow associates. During business hours or whenever representing Harris Teeter, you are expected to present a clean, neat, and tasteful appearance. You are required to always dress and groom yourself according to our Company policy that reflects accepted conservative norms. Be reliable and punctual by reporting for work on time and as scheduled. When you are absent or late, it places a burden on other associates and can impact productivity and service. In the rare instances when you cannot avoid being late or are unable to work as scheduled, notify your supervisor or Manager-on-duty two (2) hours in advance of your scheduled start time so that appropriate arrangements can be made. Confers with client regarding price and type of arrangement desired. Plans arrangement according to client's requirements and costs or selects appropriate standard design pattern. Selects flora and foliage necessary for arrangement. Trims material and arranges bouquets, sprays, wreaths, dish gardens, terrariums, and other items. Decorates buildings, halls, churches, or other facilities where events are planned. Packs and wraps completed arrangements. Estimates costs and prices arrangements. Conducts classes or demonstrations. Unload product from truck and place in coolers according to Receiving and Rotation standards; load salvage on truck as required. Remove products from storage. Operate all necessary equipment to effectively prepare and portion products according to standards and/or customer's specification. Operate wrapping station and scales. Weight, price, date, wrap, and package products according to standards. Sell Only Fresh Products. Follow Harris Teeter standards regarding product preparation, merchandising, rotation, dating, and markdown standards and guidelines. Comply with the Food Safety policy (RO-37). Ensure that all floral products are properly refrigerated. Check temperatures of product, cases, and coolers according to standards. Keep Our Shelves Properly Stocked. Stock and block product according to standards and in a manner that maximizes sales and minimizes shrink. Work backstock on a regular basis. Process close-dated and damaged product according to standards. Check merchandising displays regularly to ensure the availability of advertised items. Inform management of the lack of advertised items, incorrect prices, missing signs, departmental changes, and/or other situations as appropriate. Keep Our Stores Clean. Comply with Health Department and Department of Agriculture [Weights & Measures] standards, regulations, and requirements. Follow Harris Teeter sanitation standards and procedures. Clean and sanitize prep room and coolers as appropriate. Keep counters and food contact surfaces clean at all times, refrigerator glass & windows wiped, floors swept and mopped, garbage emptied, displays well merchandised and neat. Communicate in English with customers and fellow associates regarding requests, current sales promotions, marketing campaigns, and essential products. When a customer asks where a product is located, take the customer to the product. Be knowledgeable of and perform fixed activities when business is light. (i.e. sweeping, cleaning, blocking, straightening, etc.) Answer telephones by saying "Harris Teeter [store name], this is [name], may I help you?" and provide requested information in a polite and professional manner. Respond back to people on "hold" in a timely manner. Understand the overall Floral Department operation. Complete paperwork accurately and maintain proper records. Assist in the inventory and price change processes. Follow all safety regulations and help keep the store free of dangerous situations. Immediately inform store management of all accidents and/or safety hazards. Record accidents and safety hazards in the designated log. Ensure that chemicals are handled, mixed, and applied according to directions and in compliance to the Hazard Communication Program Manual. Adapt to various situations and adjust to shifting priorities. Be flexible and able to perform multiple tasks. Balance taking direction with taking initiative and demonstrate the flexibility required to accomplish the duties of the entire shift. Provide assistance to fellow associates to complete daily tasks such as unloading trucks, checking in deliveries, taking inventory, restocking and organizing display merchandisers and coolers, and other duties as assigned. Establish a working and shopping environment of trust, respect, and integrity. Take Excellent Care of Your Fellow Associates. Be a team player. Support and assist your fellow associates without complaint. Be open to new ideas and opportunities. Follow through with any special requests or recommendations from management. Comply with Company standards, policies, and procedures. Perform essential job functions throughout scheduled hours. QUALIFICATIONS. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Associates must be at least 16 years of age. PERSONAL SKILLS. Exceptional interpersonal skills. Willingness to participate in and successfully complete required training and to work with the team to increase customer satisfaction and sales. EDUCATION and/or EXPERIENCE. High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS. Ability to read and comprehend simple instructions, short correspondence, and memos [in English]. Ability to write simple correspondence [in English]. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other associates of the organization who only speak English. MATHEMATICAL SKILLS. Ability to add and subtract two digit numbers and to perform these operations using units of American money and weight measurement. REASONING ABILITY. Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS. Complete Company's training including but not limited to: new hire orientation, food sanitation, customer service network, safety, food safety, and product knowledge. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Repetition Weight Frequently - near constant work Up to 5 lbs Intermittently - up to several times an hour Up to 10 lbs Occasionally - up to several times a shift Up to 30 lbs The National Institute of Occupational Safety and Health (NIOSH) has published guidelines for safe lifting. Based on those, Harris Teeter requires our associates to obtain assistance from a second associate ("team lifting") when lifting any case or object weighing 50lbs or greater. Harris Teeter also recognizes that some associates may need to obtain assistance with weights under 50lbs, and encourages team lifts for any weight that an associate feels uncomfortable lifting by themselves. While performing the duties of this job, the associate is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear; and taste or smell. The associate is occasionally required to climb or balance and stoop, kneel, or crouch. The associate must frequently lift and/or move up to 5 pounds, intermittently lift and/or move up to 10 pounds, occasionally move and/or lift up to 30 pounds, and reaches from 6-72 inches. Specific vision abilities required by this job include close vision, color, and depth perception. WORK ENVIRONMENT. The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is frequently exposed to a cool environment and to wet and/or humid conditions and moving mechanical parts. The associate is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and is frequently exposed to extreme cold. The noise level in the work environment is usually moderate. COMPETENCIES. To perform the job successfully, an individual is required to demonstrate the following competencies: Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time; Informs management at least 2 hours before shift begins when going to be late or absent from work. Customer Service - Provides exceptional customer service even in difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service ; Responds to requests for service and assistance; Meets commitments. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Completes tasks on time or notifies appropriate person with an alternate plan. Diversity - Demonstrates knowledge of Company EEO policy; Shows respect and sensitivity for cultural differences; Promotes a harassment-free environment. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds Company values. Initiative - Volunteers readily; Undertakes self-development activities; Asks for and offers help when needed. Innovation - Generates suggestions for improving work; Presents ideas and information in a respectful manner. Interpersonal Skills - Is never rude; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Judgement - Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions. Motivation - Sets and achieves personal goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence. Oral Communication - Speaks English clearly and persuasively in positive, negative, and in emergency or other situations in which individuals must speak a common language to promote safety; Listens and gets clarification; Responds appropriately to questions; Demonstrates group presentation skills; Participates in meetings. Written Communication - Writes clearly and informatively in English; Presents numerical data effectively; Able to read and interpret English-written information. Organizational Support - Follows policies and procedures; Completes tasks correctly and on time. Planning/Organizing - Prioritizes work activities; Uses time efficiently. Problem Solving - Identifies and resolves concerns in a timely manner; Uses reason even when dealing with emotional topics. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions ; Uses equipment and materials properly. Teamwork - Balances team and own responsibilities; Is open to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to build knowledge and skills; Shares job knowledge with others. Additional Information * Posting Date: Dec 17, 2025 Compensation

The Visual Merchandiser's primary responsibility is to fulfill our mission statement, “to create the most enjoyable shopping experience possible for our Guests.” Visual Merchandising Teammates will contribute to profitability by taking charge of the visual appearance and shopability of the store using visual guidelines. Essential Duties and Responsibilities This description intends to describe the general nature and level of work performed by Teammates assigned to this job. It is not intended to include all duties, responsibilities and qualifications. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ensure timely installation and demonstrate the ability to properly install and remove window presentations and store promotion events in a timely manner, including the ability to pack, unpack, and prep all props while supporting the visual direction of the company standard. Partner with store leadership to discuss and plan store layouts and creative design flow of the merchandise including product rotation and markdown placement. Strive to do better business by consistently communicating with leadership team. Educate the reasons driving visual strategies to Buckle leadership. Display urgency when getting new product to the floor. Assisting with Guests and Teammates as needed. Strategic understanding of the Sales Presentation, Register and iPad to help assist Guests. Ability to work a flexible schedule, which may include mornings, evenings, and weekends, and the day of/day after Thanksgiving and Christmas, based upon store and business needs. Communicate any policy violations and Teammate or Guest concerns to Store Manager, District Manager, and/or Human Resources in a timely, confidential manner. Understand and apply the Buckle's Code of Ethics and all Buckle's policies, procedures, and handbooks. Fulfill mission statement by performing job duties with a high level of customer service while contributing to a positive team spirit. Special projects and other duties as assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Part-time Benefits Benefits Available (after applicable waiting period): Teammate Discount Performance Bonuses Employee Assistance Program 401(k) (subject to additional requirements) Paid Sick Time (where required by state) Education and/or Experience Associate's degree or equivalent from two-year College or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. Physical Demands The physical demands described here are representative of those that must be met by a Teammate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the Teammate is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk and hear. The Teammate is occasionally required to sit. Physical ability to lift and maneuver 50lbs throughout the store and backroom. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment While performing the duties of this job, the Teammate regularly works in a retail store setting. The noise level in the work environment is usually moderate. Equal Employment Opportunity Buckle is committed to hiring and developing the most qualified Teammates from the available workforce in the communities we serve. Equal employment opportunity has been, and will continue to be, a fundamental principle at Buckle, where employment is based upon personal capabilities and qualifications without discrimination and retaliation because of veteran status, uniformed service member status, race, color, national origin or ancestry, creed, religion, sex, sexual orientation, gender identity or expression, age, pregnancy (including childbirth, lactation, and related medical conditions), national origin or ancestry, physical or mental disability, genetic information (including characteristics and testing), or any other protected characteristic as established by applicable local, state, or federal law. For state specific information, refer to the Teammate Center. #LI-Onsite

Base Pay This role has a minimum base pay from $15.24 per hour with higher starting pay available based on experience. Purpose: Floor & Decor Designers provide a seamless start to finish consultative design service that builds lasting relationships and brand loyalty with the customers we serve. At Floor & Decor Designers are responsible for meeting with customers, listening to their project needs, educating them on all that is required for their project, and building a creative design concept that incorporates the customers personal style, lifestyle, and budget. Minimum Eligibility Requirements Minimum of One (1) year of interior design experience or prior retail/sales experience Degree in Design is a plus Knowledge of hard surface flooring is a plus Proficient in basic mathematical skills Must be self-motivated and able to multi-task in a fast-paced environment Excellent verbal, written, and interpersonal skills Basic computer knowledge, including Microsoft Office suite Internal candidates must have 12 months of experience in a design consultant position Essential Functions Greet store customers in a helpful manner and supports store design walk-in needs Schedule design appointments for existing and potential customers, while developing clientele through networking and referrals, as well as leads generated within the store Providing tile, wood, stone and accessories advice to homeowners, interior designers, and builders for both residential and commercial projects. Design and sell complete, functional and aesthetically appealing solutions Manage multiple, simultaneous customer projects through all phases with a high level of accuracy, timeliness and follow-up including consistent and concise communication to customers and others. Proficient and consistent use of company communication tools and emails are required Collaborate, partner and communicate with store leadership and employees to manage projects from inquiry to installation, and achieve sales and other goals Enthusiastically support all company initiatives and goals by modeling and coaching best practices with store employees Engage in current and emerging design trends in your market Responsible for understanding and utilizing design applications i.e.; Salesforce, proprietary Online Design Appointment Scheduler, MyProject Perform other duties as assigned Working Conditions (travel, hours, environment) Limited travel may be required by car While performing the duties of this job, the employee is frequently exposed to a warehouse environment and moving vehicles. The noise level in the work environment is typically moderate to noisy. Physical/Sensory Requirements Medium Work - Ability to exert 20-50 pounds of force occasionally, and/or 10-25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to lift, carry, push, pull, or otherwise move objects. The employee is often required to use their hands and fingers, to handle or feel. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl.ies and interests of the company. Store Hours Monday - Friday 7:00 AM - 8:00 PM Saturday 8:00 AM - 7:00 PM Sunday 10:00 AM - 6:00 PM Pickup Hours Monday - Friday 7:00 AM - 7:00 PM Saturday 8:00 AM - 7:00 PM Sunday 10:00 AM - 6:00 PM Benefits & Rewards Bonus opportunities & career advancement opportunities at every level Programs that help you reach your financial goals: 401k with company match, Employee Stock Purchase Plan, and Referral Bonus Program Medical, Dental, Vision, Life, and other Insurance Plans (subject to eligibility criteria) Work-life balance, including: Paid vacation and sick time for eligible associates Paid holidays plus a personal holiday Paid Volunteer Time Off that starts on Day 1 Equal Employment Opportunity Floor & Decor provides equal employment opportunities to all associates and applicants without regard to age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, disability, veteran status, genetic information, ethnicity, citizenship, or any other category protected by law. This policy applies to all areas of employment, including recruitment, testing, screening, hiring, selection for training, upgrading, transfer, demotion, layoff, discipline, termination, compensation, benefits and all other privileges, terms and conditions of employment. This policy and the law prohibit employment discrimination against any associate or applicant on the basis of any legally protected status outlined above.

Job Description Job Title: Custom Cabinet Designer Company: Mountain Showcase Employment Type: Full-Time Compensation: $60,000.00 - $100,000.00 (base salary plus commission) About the Role Mountain Showcase is seeking a talented and detail-oriented Custom Cabinet Designer to join our dynamic, design-build team. This is a client-facing role ideal for someone with a strong aesthetic sense, technical precision, and a passion for crafting beautiful and functional living spaces. You'll take the lead on custom cabinetry design from concept through construction, helping bring high-end residential construction projects to life. What You'll Do Lead client design meetings to understand needs, preferences, and vision Create precise and buildable cabinetry designs using CAD software, as well as work with a team of drafters when needed Develop detailed 3D renderings, elevations, and construction documents Select materials, finishes, hardware, and accessories aligned with project goals and budget Collaborate with engineers, architects, and trades to integrate cabinetry into larger projects Maintain clear communication with clients throughout the project lifecycle Participate in on-site reviews to ensure design integrity during construction Stay current with trends, products, and innovations in cabinetry and interior design You're a Fit If You Have 5+ years of experience in custom cabinetry design (high-end residential preferred) Strong proficiency in CAD software (AutoCAD, Cabinet Vision or similar) Deep knowledge of cabinetry construction methods Excellent communication and client relationship skills Strong attention to detail Ability to balance creativity with practical construction requirements Proficiency reading construction plan sets A portfolio showcasing your design and drafting work A valid driver's license and reliable transportation Preferred Experience in Interior Design, Architecture, or a related field Experience in new construction, full-home renovations and kitchen & bath remodeling Comfortable measuring field conditions Why Join Us? At Mountain Showcase, we create more than beautiful interiors - we design custom spaces that reflect our clients' lives. We offer a collaborative environment, opportunities for growth, and the chance to work on meaningful, high-end residential projects. If you're passionate about cabinetry design and want to make an impact on people's homes, we'd love to hear from you.

Piping Principal Designer The purpose of this position is to provide essential technical knowledge and perform design work as described below. This position serves as an Area Lead Designer or staff designer performing assignments of advanced complexity. Under general supervision of the Discipline Lead Engineer or Design Supervisor, serve as an Area Lead Designer providing guidance/supervision to designers Prepare and check designs of advanced complexity utilizing 3D modeling and 2D computer-aided drafting and design (CADD) automation tools Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost and schedule baselines Perform bulk material take-off analysis and tabulations Provide technical support to activities associated with equipment and material procurement and subcontracting including review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes Other duties as assigned Basic Job Requirements U.S. Citizenship required Associate degree in related technical field of study and minimum fifteen (15) years of work-related experience Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors Job related technical knowledge necessary to complete the job Advanced knowledge of discipline codes and standards Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines Ability to attend to detail and work in a time-conscious and time-effective manner Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs Significant experience providing engineering, procurement and construction (EPC) services on large industrial projects Proficiency executing large engineering projects utilizing 3D modeling and 2D CADD automation tools in a multi-discipline environment Discipline Specific Job Requirements Read, interpret, and generate design drawings with minimal input from a member of the engineering staff Prepare 3D layouts and/or schematics for conceptual and detailed designs of advanced complexity Background and experience must include drafting/designer experience in engineering fields, such as piping, electrical, mechanical, structural, communications, architectural, fire protection or civil Proficiency in computer aided design utilizing Bentley MicroStation with demonstrated experience to originate and produce drawings with minimum supervision required Proficiency in 3D modeling using Intergraph Smart3D (S3D) with minimum 3 years of experience Produce and check complex piping drawings including plot plans, piping plans, isometrics and sketches Provide assistance to construction and pipe fabrication personnel Preferred Qualifications Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1 Knowledge of commercial availability and cost of materials Practical field experience EPC project experience for the following industries: U.S Department of Energy or other U.S. Federal Government Agency Nuclear facilities under a nuclear quality assurance program Manufacturing, pharmaceutical or biotechnology Knowledge of piping components, commercial availability and cost of materials Working knowledge of and ability to interpret Piping and Instrumentation Diagram (P&ID), other discipline drawings and vendor equipment documentation Advanced knowledge of: Intergraph SmartPlant Review software Piping design requirements (equipment arrangement, piping layout, stress requirements, and material requirements) Working knowledge of and ability to interpret Piping and Instrumentation Diagram (P&ID), update master P&ID and pipe line list ___________________________________________________________________________________________________________________________________________________________ 💼 Why Join iParametrics? At iParametrics, we deliver mission-critical solutions that impact national security, infrastructure, and emergency management. Our work spans all 50 states, U.S. territories, and 39 countries, supporting federal and private sector clients for over 20 years. 📢 Perks & Benefits: 🏥 Medical, dental, and vision coverage 💰 401(k) with company match 📆 Paid time off & holidays 📈 Competitive salary (bi-weekly pay, DOE) iParametrics delivers a variety of mission-critical management and support services for construction, emergency management, homeland security, risk management, and other programs to commercial and public sector clients. We were founded in 2003 and are based in metro Atlanta, Georgia, with staff and project offices nationwide. For over 20 years, we have provided guidance and expertise to help our clients confidently navigate the most challenging and complex issues relating to the safety and security of their people, assets, and operations. This includes technical and programmatic support of complex critical infrastructure programs in 39 countries, all 50 states, and 3 US Territories. iParametrics is an Equal Opportunity Employer. We are committed to a work environment that supports and respects all individuals without discrimination based on race, color, religion, national origin, age, sex, pregnancy, marital status, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Application review will consider without limitation the following criteria: qualifications, education, and experience specific to the /duties as well as prior experience with leading construction companies. Applicants must be able to pass the iParametrics Drug and Alcohol test. This job description is intended to outline the general nature and level of work that would be performed by project team members. It is not designed to cover or contain a comprehensive list of all responsibilities, duties, or skills required for this job. This description is subject to change at the discretion of the company, with or without notice.

Kitchen Designers at The Home Depot help customers turn their kitchen and bath dreams into reality. Kitchen Designers greet and engage customers, listen to their needs, and guide them through the design process-offering “good, better, best” options, samples to take home, and expert advice on products, services, and installation. Kitchen Designers use design tools and showroom resources to educate customers, set clear expectations, and provide tailored solutions for every project, whether they're DIYers or working with professionals. Kitchen Designers advocate for customers by highlighting current promotions, financing options, and the advantages of choosing Home Depot over competitors. Kitchen Designers also ensure the showroom is clean, organized, and well-stocked, creating a welcoming and safe shopping environment. Throughout each project, Kitchen Designers follow up on project statuses, address questions, and guide customers every step of the way.

Job DescriptionHVAC Designer POSITION DESCRIPTIONOperating under detailed instructions and review, the purpose of this position is to provide the essential technical knowledge and perform the work listed. This role has the responsibility to promote Fluor's competitiveness within the global marketplace by delivering quality services of unmatched value and technical competence. The purpose of this position is to work on design and perform 3D layout of moderate to complex advanced scope and may serve as Design Area Lead. Prepare 2D Computer Aided Design (CAD) drawings of moderate to advanced complexity Check work done by other Designers Review drawings and vendor equipment documentation of moderate to advanced complexity within the discipline and from other disciplines for compliance with project requirements, and actively seek discrepancy resolution Adhere to industry codes and standards as well as department practices and procedures Other duties as assigned MINIMUM QUALIFICATIONS Candidate must be a U.S. Citizen. A combination of education and directly related experience equal to ten (10) years Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors. Job related technical knowledge necessary to complete the job. Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines. Ability to attend to detail and work in a time-conscious and time-effective manner. Ability to work in a diverse work environment. Satisfactory results of a pre-employment screening, which includes a background check and drug screening. Desired Qualifications Accredited two (2) year degree or global equivalent in technical field of study. Knowledge of commercial availability and cost of materials. Practical field experience. Intermediate computer and software skills to include the use of word processing, e-mail, spreadsheet, and electronic presentation programs. LOCATION Position will be 100% onsite in Greenville, SC. (Local candidates or willing to relocate at the candidate's expense). PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. CONTRACT DURATIONOne (1) year with the possibility of extension/conversion.