Interior designer jobs in Highland, CA - 157 jobs

Who We Are HMC Architects is an employee-owned design firm with a desire to make a difference in our communities. As a purpose-driven firm based on values, our mission to design for good drives everything we do. And our ownership culture creates alignment and increased commitment to that mission, keeping us on track to being successful. What We Do Founded with the purpose of anticipating community needs, HMC aims to create designs that have a positive impact, now and into the future. We focus primarily on opportunities to have the most direct contribution to communitiesthrough healthcare, education, and civic spaces. Job Summary The Designer will assist in the design and development of projects, will produce design presentation material, and will assist in the production and documentation of construction documents. Position Location The position can be located in either Los Angeles, CA or Ontario, CA. This position is eligible for hybrid (office/remote) working arrangement and flexible working hours; requires 3 days in the office and the ability to work from home Mondays and Fridays. Responsibilities * Assist in the documentation of project design in Revit such as three-dimensional modeling or material research * Assist in organization and generation of working drawings. * Support design team and ensure that the design intent is followed through all phases * Assist in development of project documents during all phases of the project * Assist in development of project marketing interview materials * Assist in all aspects of the plan check process * Apply accessibility codes to basic drawings * Support the construction administration phase of a project by assisting in review of submittals, shop drawings, response to RFI's, and preparation of instruction bulletins for changes * Prepare basic "block out" drawings with accuracy and thoroughness, (site plans, floor plans, exterior elevations, interior elevations) from design sketches, and pickup "red marks" prepared by supervisor. * Attend professional activities outside the office * Estimate hours for assigned tasks and finish tasks within agreed-upon budget hours * Participate in office design charettes * Other duties as assigned Requirements * Architectural degree from an accredited university * Minimum of one (1) year experience in architectural design preferred * Listen and communicate effectively and professionally * Asks questions about assignments when unclear * Ability to set goals, prioritize, and plan work activities for self-management and use time efficiently * Has working knowledge and understanding for use of HMC equipment and software * Ability to professionally communicate both verbally and in writing to give assignments to office support staff, consultants, and vendors * Ability to delegate assignments to support staff and always be respectful * Be proficient with HMCs documentation and office practice systems * Ability to correspond effectively with Architects for Revit files and minor directives * Always be professional and respectful in interactions with clients and consultants * Demonstrate motivation in seeking new responsibilities and challenges * Demonstrate Revit competency in advance commands of editing requirements, drawings set up for any type of project, management and use of all Revit files and resolution of any related Revit issues on HMC Revit platform * Understand the organization of the contract documents * Possess knowledge of drawing setup, layers, plotting/publishing, dimensions, blocks, attributes, purge/audit/recover, back up files, viewports * Understand technical terminology of the architectural and construction industry The salary range for this position is $49,006 - $66,698 The actual offered salary for this position will vary depending on multiple factors including the candidates qualification, education, position knowledge, work experience, skills, ability, work location, and internal incumbent compensation for similar roles. We do not anticipate individuals hired into this position will start at or near the top half of the range listed; the decision will be based on each individual case. The salary range listed above does not include other compensation elements such as discretionary bonus opportunities, employee stock ownership grants, paid time off, medical insurance, and other wage and benefit opportunities.

California Baptist University ( CBU ) invites nominations and applications for the position of Dean, College of Architecture, Visual Arts + Design ( CAVAD ). Founded in 1950, California Baptist University is a private comprehensive institution located in Riverside, California. Accredited by the WASC Senior College and University Commission ( WSCUC ), CBU offers more than 100 majors, more than 30 graduate degree programs and seven doctoral degrees. Affiliated with California Southern Baptist Convention, CBU is a member of the Council for Christian Colleges and Universities, the Association of Independent California Colleges and Universities and the International Association of Baptist Colleges and Universities. For more information about the university, visit this page ***************************** CAVAD is an established multi-faceted design college dedicated to the integration of Christian thought and practice, cutting-edge design pedagogy, and reflective professional practice. As one of the largest Christian art and design colleges in the United States, CAVAD embraces the entire spectrum of art and design-oriented disciplines where students experience an interdisciplinary approach to learning that offers unique and unlimited opportunities for collaboration, inspiration, and most importantly, a deep and well-rounded education rooted in the Christian worldview. With strong growth in student numbers and program offerings, CAVAD consists of 9 academic programs, 23 faculty, 3 support staff, and approximately 600 students. For further information about the college, please see cavad.calbaptist.edu Position Description. The Dean of the College of Architecture, Visual Arts + Design is the chief academic officer and the administrative head of the school. The Dean holds academic rank and is charged with the administration, academic leadership, and supervision of the operation of the school through its instructional programs, research, publications, and service activities. This administrator must be a visionary who has the demonstrated ability and entrepreneurial mindset to execute a strategic plan. The Dean reports directly to the Provost/Senior Vice President for Academic Affairs and serves on the Provost's Council. Qualifications Required qualifications include 1) A demonstrated mature Christian faith aligned with CBU's foundation as a Christian institution committed to the Great Commission, 2) demonstrated experience and knowledge of integrating Christian faith with the theory and practice of art, design, or creativity, 3) an earned terminal degree from an accredited institution in a field related to the work of CAVAD , 4) progressive administrative experience in higher education, 5) knowledge of accreditation bodies, 6) an outstanding record of leadership and service to the community, and 7) an outstanding record of academic activities including university teaching, research, retention, fiscal management, strategic planning, and enthusiasm and the ability to contribute to substantial development and fundraising efforts. The successful candidate is expected to assume duties July 1, 2024.

Job Description The Interior Designer provides design and consultative services to clients and internal sales staff for commercial furniture interior design. The designer is a valued professional member of the team, bringing knowledge, aesthetics, and creative ideas that improve company results through workstyles, trends, products, and space. Job Type: Full-time, exempt, (On-Site position) Specific responsibilities include: Attends client meetings/planning sessions to review project scope and assess programming needs. Review documents and analyze building plans/site conditions to assure accurate space requirements. Conducts field measurements, existing furniture inventories, and code analysis. Conceptualize design solutions and prepare drawings based on information received from the client and sales team. Develop/present space plans and furniture typicals that address the programming/needs analysis. Responsible for the development and accuracy of project drawings and furniture specifications Use CET and Project Matrix to create working drawings, renderings, and accurate specifications. Present schematic layouts, preliminary and final design layouts, presentation media, and proposed specification lists, to be provided to the client. Select, develop, and present color and finish options including finish presentations and renderings. Lead Live Design presentations for clients. Required to self-check all project documents (drawings, specs, renderings) prior to submitting for double-check process. Responsible for transmitting complete and accurate project documentation to the team for order entry and installation. Provide working drawings to third-party contractors as needed (A&D firm, GC, electrician, IT, etc.) Request quotes and drawings from ancillary vendors. Able to estimate time to complete project scope of work for budgetary purposes and complete weekly timesheet for accurate billing. Provide timely and accurate information for clients/vendors. Attends weekly team meetings and all required company/department functions and training. Demonstrate full knowledge of the application of codes, and electrical and data planning on projects. Full knowledge of technology tools required to perform duties (CET, NetSuite) and attend regular training. Qualifications + Skills: Bachelor's degree in Interior Design or Architecture Minimum 2-5 years of commercial design experience Intermediate to Advanced AutoCAD/CET proficiency & Project Matrix Demonstrated space planning and project management ability. Experience with Haworth products preferred. Polished communication skills Excellent interpersonal skills PeopleSpace is a market leader, providing workspace strategy, contract office furniture, custom solutions, and architectural wall products. We have over 25 years of success in creating environments to improve the well-being, culture, engagement, and retention of both our client's employees and our team members. As one of Haworth's top global dealerships, we boast the largest dealership footprint on the West Coast with five Customer Experience Centers. PeopleSpace is a dynamic and rising organization that provides great upward mobility for individuals who are looking to learn, grow and find a long-term home. We offer great benefits and foster an inspired company culture based on our core values. Visit us at peoplespace.com to learn more regarding the positions. PeopleSpace provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Should you need assistance filling out an application or applying for a position at PeopleSpace, please contact our HR department at PeopleSpace. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

This dynamic and demanding position will require a personable candidate with experience in designing interiors for large-scale ground-up and renovation projects in the education, civic, corporate, or health-care sectors. You will join a collaborative team of project designers, production architects, landscape designers, and engineers, and will be expected to lead interior design projects and collaborate with and mentor junior designer. The ideal candidate should possess exceptional interpersonal skills, robust technical abilities, be an effective presenter of ideas and concepts, have knowledge of interior finishes, and demonstrate strong leadership qualities. This position is located in our Anaheim, CA office. Your Impact: * Provide leadership in all project phases from initial development to completion and assist in the design and documentation of interior spaces. * Create design concepts and continue the development through all design phases. * Responsible for interior finish materials selections, specification, and production of finish material boards. * Utilize space planning, knowledge of codes, understanding of mechanical systems, etc. * Produce construction documentation, construction administration, and review of submittals. Here's What You'll Need: * A minimum of 5-7 years of professional experience. * Bachelor of Interior Design, Interior Architecture, or Architecture (CID or NCIDQ accreditation preferred) * Demonstrated knowledge of Furniture, Fixtures, and Equipment (FF&E) process. * Excellent communication skills, must be able to present design concepts to clients. * Proficient in Revit, Sketchup, Enscape, full Adobe Suite, Twin Motion, Bluebeam Revu, Office 365. Knowledge of Lumion, D5, Rhino, and grasshopper a plus. Here's How You'll Stand Out: * NCIDQ or CID Interior Designer, registered in the state of your office is a plus. * Experience with furniture specifications and procurement a plus. * K12, Higher Education, Civic, and Corporate design experience strongly preferred. * Ability to work well while juggling and prioritize multiple projects, often against multiple deadlines in a diplomatic manner. * Strong knowledge of lighting design and consultant coordination preferred. * Strong devotion to customer service. The actual offered base salary for California locations will vary depending on factors such as individual qualifications, education, experience, skills, job-related knowledge, work location, and internal equity. We would not anticipate that the individual hired into this role will be at or near the top half of the range provided, but the decision will be dependent on the factors of each individual case. The compensation package may also include incentive compensation in the form of discretionary bonuses in addition to base salary and a full range of medical, financial, and other benefits. The salary range for this position is below. $59,977.00 - $89,966.00 PBK is an Equal Employment Opportunity employer. All qualified applicants can be considered for an opportunity without regard to sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, criminal history, or any other characteristic protected by law. Additionally, it is our policy to provide equal employment opportunity in all phases of employment in compliance with all applicable federal and state laws, rules, and regulations.

Job DescriptionSalary: $70k-$85k The Pitch Looking to contribute and collaborate on buildingradresidential remodeling projects? Sea Pointe Design + Remodel is looking for aSenior InteriorArchitecturalDesigner.This position is responsible fordrafting, designing, andsupporting Design Consultants in communicating design intent and details to the Client, as well as coordinating Construction Drawings to ensure streamlined implementation of our designs. The right player should enjoy communicating and collaborating with our team of designers, project managers and clients. You shouldhave an eye for detail, love problem solving and havekillerdrafting and 3-D modelingskills.Knowledgeincabinet design would be a huge plus! Whatyoulldo: Model required 3-D design drawings and perspectives with requested materials from the design team for client communication and to provide the clients with a visualization of their future home using Chief Architect, SketchUp andrenderingsoftware. Draftinterior floorplans andelevations as needed for the basis of designusing Chief Architect. Coordinate with our team of designers to draftand designproposedfloorplans,elevations, andinteriorelevations as needed for client communication,pricing, and construction. Youlllove this job ifyoure: A problem solver you love puzzles and solving complex design problems. Detail oriented. You enjoy the challenge of findingefficienciesand are always striving to make things 1% better. Ahelperwho genuinely wants to better ourclientslives through re-thinking their home and help make their vision a reality. A self-starter whotakes initiative and is solution oriented. Ateamplayer who loves collaboration andworkingwith a team of talented professionals. Aspace planaficionado you lovetheseeingdevelopment of a project from start to finish; bonus if you love residential! Someone with a keen interest in construction and a desire to fully understand how buildings come together. Whatyoullneed: Minimum of7 to 10 years experience ofinterior design,drafting andrenderingexperience using Revit, Chief Architect and SketchUp - residentialdesignis a plus! Demonstrated oral and written communication skills Alsocompetent in Chief Architect, SketchUp Pro,Enscape, Adobe Acrobat, Adobe PhotoshopMS Office Suite,and Office 365. Professional, positive, outgoing, peoplefriendly, attitude. Local applicants only. *Applicants willbe requiredto pass background check .* Our company participates in E-Verify to confirm work authorization of employees. For more information on E-Verify, please visit***************** Sea Pointe Design & Remodel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other protected status. Reasonable Accommodation Statement: Sea Pointe Design & Remodel is committed to providing reasonable accommodation for qualified applicants and employees with disabilities. If you need assistance or accommodation during the application process, please contact us at ********************

Joining Team DWE Design West Engineering is a multidisciplinary building systems design engineering company in the Architecture, Engineering, and Construction industry that prides itself on customer service. We achieve this through investing in our team and creating a supportive working environment where our team can thrive. At DWE, building trust within our team is a top priority that is achieved by focusing on the professional development and growth of our team members. We strive to stay current with technologies, adapt within the current industry, and provide a fundamental commitment to mentorship for all employees. Here are a few ways we plan to support you when you are on our team: A fun and inclusive atmosphere with a people first philosophy Flexible and hybrid work schedule options Team building budgets allocated to each team, with comped hours for fun and extracurricular activities. Team building around philanthropic community-based events. Quarterly check-ins with supervisors to review progress toward personal and professional development goals. Partnering with you on your path toward certifications and licensing Networking and ongoing education opportunities through conferences and industry organizations. Mentorship opportunities internally and through partnering organizations. One team philosophy between our offices with inter-office project collaboration on regional and national work. Commitment to company growth to support the personal growth of our team. Title of Position- Electrical Project Designer: Design West Engineering is looking for a highly motivated and detail-oriented individual to be a part of our growing team based out of our San Bernardino, CA office. As an Electrical Project Designer at Design West Engineering, you will have the opportunity to apply your design expertise to exciting and challenging projects while working under the supervision of top engineers in the Architectural, Engineering and Construction industry. The ideal candidate will possess a minimum of 4 years of experience as an Electrical Designer, Revit and AutoCAD experience, have excellent communication and time management skills, work well in a team environment, be familiar with commonly used business codes, and will be proficient with Microsoft Office. Required Qualifications: Proficient in Microsoft Office, AutoCAD, and Revit Excellent communication skills 4 years of experience as a Project Designer in Electrical Engineering for building power and lighting systems Possess a working knowledge of building codes, NEC, and CA Title 24 requirements. Comfortable working in an office environment Ability to work both independently and with a team. Must have excellent time management skills to meet project deadlines. Desired Qualifications: 6 or more years of experience as a Project Designer in Electrical Engineering Bachelor's degree in electrical engineering EIT. PE License or demonstrated progress toward these goals. LEED AP or other relevant certifications Job duties will include: Design of electrical power distribution, lighting, fire alarm, and lighting control systems for a variety of project types Perform routine calculations such as sizing distribution equipment, feeders, and branch circuits. Generate equipment schedules and code compliance documentation. Targeted Compensation: $55,000- $80,000 per year, depending on experience Opportunity for bonus twice per year Summary of Personal Benefits: Health insurance for yourself. You may also add dependents as required at your cost. Dental and Vision Insurance Life Insurance Paid holiday time annually Paid Time Off (Vacation, Sick) 401(k) retirement account. Design West Engineering will contribute 3% of salary to your account, whether or not you decide to contribute to the plan.

Interior Design Intern WHAT YOU WILL DO * Create Interior design proposals for concept and production car programs through sketches, renderings, and 3D digital models * Oversee the development of Computer Assisted Simulation (CAS) to create 3D Digital models and physical models to execute selected concepts * Consult with Management, Engineering, and Marketing to incorporate design criteria and resolve design proposal-related issues HOW WILL YOU MAKE AN IMPACT * Showcase creativity and develop design with future outlook for Genesis * Support on Studio Design work * Create a body of work through design sketches, 3D models and Visualisation WHAT YOU WILL BRING TO THE ROLE * Pursuing an undergraduate degree STILL INTERESTED? WHY NOT APPLY? OTHER DETAILS * Candidates applying for positions with Hyundai KIA must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. * HATCI is an Equal Opportunity Employer including Disabled and Veteran. VEVRAA Federal contractor. * Compensation Range: * $30-$36/hour

TECHNICAL DESIGNER - Irvine Founded in 1993, TCA Architects specializes in the planning and design of next generation, high density multi-family housing, retail, mixed-use and signature hospitality developments taking pride in helping shape quality environments for everyone. The firm's collaborative approach and industry leading technological expertise have resulted in award-winning, sustainable projects that respect our communities and the environment. With studios in Irvine, Los Angeles, Oakland and Honolulu, TCA has been recognized for their industry leading expertise in master planning and design for a variety of multi-family, hospitality and mixed-use projects. TCA is looking for a passionate, design oriented individual who is interested in multi-family design to join our growing team. The candidate will assist the Job Captain in the production of construction documents from cartoon set, prepare all general project data sheets, dimension all plans, note & reference all materials & products, draw undeveloped building & wall sections, assemble project details, apply applicable code requirements, and assist with back check. They will also assist with plan check corrections and consultant coordination, transferring hand sketched unit floor plans and elevations into Revit, and assist the PM or JC with services during construction (issue ASI's, RFI's, and review shop drawings). We also prize good hand drawing skills, but require tools such as SketchUp, Revit, Illustrator, InDesign and Photoshop to present our work. A Technical Designer will also support Senior Designers with graphics, 3D modeling, presentations, and design studies. Qualifications: * Multi-family experience preferred * Minimum of 3 - 5 years Revit experience * Working knowledge of building construction Types I, III and V. * Excellent organizational skills * Ability to prioritize & multi-task Education: * Bachelor's Degree in Architecture preferred * On track to be licensed Position Location: The Technical Designer will be working in our Irvine Office. We offer a schedule of working three days in the office and the remaining two days working from home. Salary Range: $28.00 - $38.00/hour ($58,240 - $79,040/yearly) About TCA Irvine: Nestled between the beach and the hub of business headquarters in Irvine, the Irvine studio is conveniently located just one mile from John Wayne Airport with easy access to many of California's major freeways, including the 405, 5, 73, and Pacific Coast Highway (PCH.) Led by Irwin Yau, TCA-OC is the most centralized studio. The staff enjoys being literally sandwiched between two of Southern California's largest fashion and dining destinations (South Coast Plaza and Fashion Island.) The studio's natural light and views of the surrounding mountains help support the flow of creativity, and Studio Directors sit among their team members in an open floor plan to promote interaction and collaboration. Welcome to TCA-OC! Benefits: TCA offers a comprehensive benefits package including medical, dental, vision, 401K, life insurance, paid holidays, vacation and paid time off. We also offer bonus opportunities and the opportunity to work a flexible schedule with half days on Friday. As part of our commitment to our staff's professional development, TCA provides a full library of IDP materials to train and expose young professionals to various areas of architecture and become more well-rounded Architects as they prepare for licensure. TCA also reimburses for successfully completed IDP tests, as well as CA licensing fees. TCA provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability or genetics.

We are seeking a Jnr Sprinkler Designer to join our dynamic team. The ideal candidate will possess a strong understanding of fire protection systems, with a particular focus on sprinkler design. Responsibilities: Develop detailed sprinkler system designs for a variety of building types, including commercial, industrial, residential, and institutional. Perform hydraulic calculations and system sizing using industry-standard software (HydraCAD). Prepare accurate and complete construction drawings, including plans, elevations, sections, and details. Coordinate with architects, engineers, and contractors to ensure the successful integration of sprinkler systems into building designs. Review shop drawings and submittals for compliance with design specifications. Conduct site inspections to verify the accuracy of installation and address any field issues. Stay abreast of the latest codes, standards, and industry best practices related to fire protection. Assist in the preparation of proposals and cost estimates for sprinkler system projects. Mentor junior designers and provide technical guidance as needed. Qualifications: Minimum 0.5 years of experience in fire protection system design, with a strong emphasis on sprinkler systems. Proven proficiency in CAD Thorough understanding of NFPA codes and standards, including NFPA 13, 15, and 25. Excellent communication, interpersonal, and problem-solving skills. Ability to work independently and as part of a team. Strong attention to detail and accuracy. Associate's or Bachelor's degree in Fire Protection Engineering or a related field preferred. Professional certifications (e.g., NICET) a plus.

About the Role & Team Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe. Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us. The WDI Show Lighting Department provides lighting designs for all areas our guests see when they enter our parks. This includes lighting for attractions, retail spaces, restaurant spaces, display areas, landscape, facades, and area development. The staff of the Show Lighting Department interface and support other WDI divisions as well as departments within our parks including Creative, Architectural, Engineering, Show Art, Show Ride, Park Operations and Park Maintenance. Through the medium of light, it is the mission of the Show Lighting Department to create highly entertaining environments in which the magic of each Disney story is possible. The Show Lighting Designer will report to the Manager Show Lighting Design. This is a Project Based Hire position with no guarantee of permanent placement. What You Will Do: Interface and coordinates with other show related disciplines. Support development of and communicate Show Lighting design concepts. Input to Show Lighting database, schedules, dimmer panels, and Show Lighting drawings. Direct or assist in field implementation of Show Lighting design when required. Interface with other disciplines throughout the various project phases as required. Research fixture information and lighting technologies in support of design effort. Work with supervisor in order to adhere to budget and schedule. Support mock-ups and presentations including set-ups and strikes. Support the programming of show related lighting control and light levels. Document the implemented design. Perform test and adjust tasks as needed. May independently design projects. Develop and communicate Show Lighting design concepts. Perform primary interface with electrical engineering disciplines to insure placement of lighting design on electrical drawings. Obtain knowledge of new and developing lighting technologies. Operating knowledge of moving lights, theatrical controls and control distribution including DMX and Ethernet in Show Lighting Designer area of specialty is lighting controls. Required Qualifications & Skills: Previous experience in the technical aspects of Theater Arts and its associated skills. Must be able to read architectural blueprints and interpret electrical drawings. Possess excellent communication skills; highly motivated; can accept direction easily. This role requires flexible availability as some work responsibilities will require completion during third shift approximately 40% of the time. Proficiency with CAD drafting programs. Familiar with the use of standard theatrical documentation (focus charts, fixture schedules, dimmer/control schedules), with an eye for detail. Possess working understanding of the theatrical applications of light (focus, color, texture, highlight and shadow, key and fill). Possess a basic to advanced understanding of the electrical configuration of theatrical dimming systems and its control as well as LED/RGB infrastructure. Professional lighting designer/assistant, capable of producing designs which reflect both the theatrical and environmental nature of a WDI product. Working knowledge of theatrical design and technical knowledge of specific discipline, including methods of construction. Working knowledge of architectural and facility requirements and integration of specific discipline products into an attraction. Have a passion for storytelling through the use of light. Understanding of the creative process and the development of a creative design. Experience in computer-based program, in Word, Excel, etc. Organizational skills including development of budgets and schedules. Minimum 1 year experience in related environment required. Current knowledge of new and developing technologies in field. Education: Bachelor's degree in Theater, Art, Design, Architecture or related field. or equivalent work experience required. Master's Degree preferred. Additional Information: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at **************************************** The hiring range for this position in Anaheim, California is $95,500 to $128,000 per year based on a 40 hour work week. The amount of hours scheduled per week may vary based on business needs. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. Job Posting Segment: WDI Creative Development Job Posting Primary Business: Global Design Services (WDI) Primary Job Posting Category: Show Lighting Design Employment Type: Full time Primary City, State, Region, Postal Code: Anaheim, CA, USA Alternate City, State, Region, Postal Code: Date Posted: 2026-01-15

CRB is a leading provider of sustainable Engineering, Architecture, Construction and Consulting solutions to the global life sciences and food and beverage industries. Our employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. CRB is a leading provider of sustainable Engineering, Architecture, Construction and Consulting solutions to the global life sciences and food and beverage industries. Our employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description The Architectural Designer performs their job functions under the supervision of a project's Architect of Record. Responsibilities include assisting with 3D modeling and design, conducting field investigations, and producing discipline specific deliverables. The Designer will work on a variety of architectural assignments, frequently on more than one project simultaneously, and will be expected to work closely with architectural and engineering staff to ensure assignments are completed accurately and efficiently. Core Responsibilities * Generate design and construction models and associated documentation, including floor and ceiling plans, elevations, sections and details utilizing Revit or other BIM software. * Generate drawings based on markups provided by Architectural staff. * Perform drawing reviews to confirm compliance with CRB Documentation Standards. * Work closely with Engineering and Construction personnel to develop and ensure coordinated designs. * Assist with field investigations and information gathering * Participate and contribute during drawing reviews, coordination meetings and quality checks. Qualifications Minimum Qualifications * Accredited Professional Degree in Architecture (B.Arch, M.Arch, and/or D.Arch) or Canadian / International equivalent) preferred * Applicable Associate Degree or Technical Trade School Certification in conjunction with recommended minimum two years of demonstrated A/E/C firm experience accepted Preferred Qualifications * Proficiency in Revit and Microsoft Office suite * Experience with Enscape, Navisworks and AutoCAD * Flexibility for moderate travel in support of project-based or training activities * LEED Accreditation, WELL Certification or similar sustainability credentials Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description esigns and produces packaging/labeling for all new and existing products. Conceptualizes multi-lingual packaging/labeling symbols, colors and graphics to create images and combinations that are original, visually appealing and competitive in the marketplace. Documents graphic design content requirements and production processes. Creates, updates, and maintains labeling formats produced with in-house production printing systems that are in compliance with domestic and international regulatory labeling requirements, Health Industry Barcode Communications Council requirements and company standards for high-quality, accuracy, and cost efficiency. Populates product databases for new and existing products. Core Job Responsibilities Responsible for compliance with applicable Corporate and Divisional Policies and procedures. 1. Designs artwork for product labeling (e.g., defines format/graphic requirements) by using departmental computer graphics software from input provided by Regulatory Affairs, Marketing, Engineering and other departments. 2. Recommends and contributes ideas of packaging and labeling strategies to project leaders by utilizing package labeling knowledge gained from historical data and material characteristics. 3. Procures foreign languages translations by forwarding English formatted text to translation agency. 4. Produces artwork packages for procurement for the Materials and Receiving Inspection Departments by compiling all materials needed to produce and inspect the final product. 5. Provides sample labels for filing submissions by printing requested labels. 6. Prepares Change Orders (COs) and specifications for approval by writing EO and specifications for EO originator to obtain approvals. 7. Verifies COs are completed correctly prior to submission to Document Control Archiving by comparing signed EO to printed electronic version of CO. Ensure all pertinent information is included in the package. 8. Keeps up-to-date on technological advances in the marketplace by attending classes/trade shows and reading trade journals. May be required to perform other duties as assigned. Minimum Experience / Training Required Knowledge of regulations and standards affecting 510(k), Class I, II, and III medical devices. Requires a minimum of 4 years experience in a quality or operational area. Qualifications Must have capacity for attention to detail with the ability to recognize errors in spelling, punctuation, and grammar. Must be able to work independently as well as within a team. Good oral and written communication and strong organizational skills necessary. Able to manage multiple tasks and prioritize accordingly to meet challenging deadlines. Must exhibit flexibility in meeting constantly changing demands. Must have good customer focus with ability to influence internal and external groups. Must have experience with word processing, database/spreadsheet and graphics programs. Prior proofreading and labeling development experience is helpful Minimum Education Associates degree or equivalent related experience to ensure basic skills and knowledge of the job requirements and provide the minimal skills needed. Additional Information All your information will be kept confidential according to EEO guidelines.

Architectural Designer The Architectural Designer will oversee the planning and execution of retail store tenant improvement projects, coordinating with internal teams, landlords, and external consultants. The role focuses on leveraging CAD software for design accuracy, managing project timelines, budgets, and compliance with safety and regulatory standards. The Construction Manager will also handle permits, procurement, and on-site quality assurance while ensuring seamless collaboration between departments and stakeholders to deliver successful project outcomes. Responsibilities: Plan, direct, and coordinate store space planning and design development with the Operations team for store tenant improvement projects, ensuring the use of CAD for design accuracy. Collaborate with landlords, A/E consultants, and vendors on project coordination, sublease plans, and tenant permitting. Manage A/E proposals, coordinate with landlords and government agencies on store entitlements, permits, and bidding processes. Review contractor schedules, submittals, change orders, and respond to RFIs. Oversee procurement and installation of owner-supplied fixtures and equipment. Produce project and cost reports; ensure accurate record-keeping and internal coordination with departments such as IT and Marketing. Conduct site visits to monitor construction quality and ensure compliance. Manage construction projects for store improvements, warehouses, and headquarters. Ensure compliance with lease agreements, safety protocols, and regulations. Work effectively and efficiently both independently with minimal direction and as part of a larger, multi-cultural team. Provide regular project updates and reports to stakeholders and management. Mitigate risks, resolve conflicts, and manage change orders to minimize disruption. Ensure compliance with lease agreements and construction regulations. Uphold safety protocols and promote a culture of safety. Stay updated on industry trends, regulations, and best practices in project management. Perform other duties as assigned by management. Qualifications: Bachelor's degree in Construction, Engineering, Architecture, or a related field (Master's degree preferred). 5+ years of experience in commercial construction projects, with a focus on CAD design and integration. Proficiency in CAD software and project management tools (e.g., Bluefin, Procore). Strong understanding of lease agreements and their impact on construction projects. Solid knowledge of MEP systems management and integration using CAD. Excellent communication, negotiation, and interpersonal skills. Strong financial acumen for budgeting and expense management. Problem-solving and decision-making abilities. Ability to work collaboratively with internal teams and external contractors. Strong attention to detail and ability to multitask in a fast-paced environment. Commitment to safety and adherence to regulations.

About the Role & Team Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe. Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us. The WDI Show Lighting Department provides lighting designs for all areas our guests see when they enter our parks. This includes lighting for attractions, retail spaces, restaurant spaces, display areas, landscape, facades, and area development. The staff of the Show Lighting Department interface and support other WDI divisions as well as departments within our parks including Creative, Architectural, Engineering, Show Art, Show Ride, Park Operations and Park Maintenance. Through the medium of light, it is the mission of the Show Lighting Department to create highly entertaining environments in which the magic of each Disney story is possible. The Show Lighting Designer will report to the Manager Show Lighting Design. This is a Project Based Hire position with no guarantee of permanent placement. What You Will Do: Interface and coordinates with other show related disciplines. Support development of and communicate Show Lighting design concepts. Input to Show Lighting database, schedules, dimmer panels, and Show Lighting drawings. Direct or assist in field implementation of Show Lighting design when required. Interface with other disciplines throughout the various project phases as required. Research fixture information and lighting technologies in support of design effort. Work with supervisor in order to adhere to budget and schedule. Support mock-ups and presentations including set-ups and strikes. Support the programming of show related lighting control and light levels. Document the implemented design. Perform test and adjust tasks as needed. May independently design projects. Develop and communicate Show Lighting design concepts. Perform primary interface with electrical engineering disciplines to insure placement of lighting design on electrical drawings. Obtain knowledge of new and developing lighting technologies. Operating knowledge of moving lights, theatrical controls and control distribution including DMX and Ethernet in Show Lighting Designer area of specialty is lighting controls. Required Qualifications & Skills: Previous experience in the technical aspects of Theater Arts and its associated skills. Must be able to read architectural blueprints and interpret electrical drawings. Possess excellent communication skills; highly motivated; can accept direction easily. This role requires flexible availability as some work responsibilities will require completion during third shift approximately 40% of the time. Proficiency with CAD drafting programs. Familiar with the use of standard theatrical documentation (focus charts, fixture schedules, dimmer/control schedules), with an eye for detail. Possess working understanding of the theatrical applications of light (focus, color, texture, highlight and shadow, key and fill). Possess a basic to advanced understanding of the electrical configuration of theatrical dimming systems and its control as well as LED/RGB infrastructure. Professional lighting designer/assistant, capable of producing designs which reflect both the theatrical and environmental nature of a WDI product. Working knowledge of theatrical design and technical knowledge of specific discipline, including methods of construction. Working knowledge of architectural and facility requirements and integration of specific discipline products into an attraction. Have a passion for storytelling through the use of light. Understanding of the creative process and the development of a creative design. Experience in computer-based program, in Word, Excel, etc. Organizational skills including development of budgets and schedules. Minimum 1 year experience in related environment required. Current knowledge of new and developing technologies in field. Education: Bachelor's degree in Theater, Art, Design, Architecture or related field. or equivalent work experience required. Master's Degree preferred. Additional Information: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at **************************************** The hiring range for this position in Anaheim, California is $95,500 to $128,000 per year based on a 40 hour work week. The amount of hours scheduled per week may vary based on business needs. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. Job Posting Segment: WDI Creative Development Job Posting Primary Business: Global Design Services (WDI) Primary Job Posting Category: Show Lighting Design Employment Type: Full time Primary City, State, Region, Postal Code: Anaheim, CA, USA Alternate City, State, Region, Postal Code: Date Posted: 2026-01-15

Embrace Your Possibilities: At Brown and Caldwell, an environmental engineering firm, we're unlocking the potential of water and healthy environments to create thriving communities. Delivering this shared purpose starts with our people: We recruit individuals seeking to develop their skills and gain experience to build a strong foundation for the future. Through an internship at Brown and Caldwell, you'll gain real-life, hands-on experience alongside our employee owners, engineers, scientists, consultants, and constructors who are driving positive changes for our clients and communities. Here you'll find opportunities for impact, community that lifts, support to thrive, and trust in you as you embark on your career journey. So, what's possible for you? Brown and Caldwell offers Summer Internship opportunities to spend a summer working with our team to support the West. We are seeking an individual interested in gaining practical, hands-on experience outside of the classroom. We promise a collaborative environment where you will grow as a professional under the guidance of your people manager and team and be trusted to support project objectives. Our work is interesting, challenging, wide-ranging in nature, and impactful for the communities we live in. We invite you to embrace your possibilities and join us to learn and develop with our team of nationally recognized experts! How Will You Make an Impact? Interns at Brown and Caldwell make a daily, material impact by completing support duties to advance their team's projects and objectives. They receive professional training and the support of their team. Interns can expect to be onboarded, mentored, and developed by industry leaders to develop real-life skills and make an impact on their assigned projects. As a Summer Intern, you can expect your experience to include the following: * Collaborate closely with project managers, engineers, designers, and BIM leads to execute work on water and wastewater treatment and conveyance infrastructure projects. * Assist in the preparation of engineering and design deliverables including drawings, specifications, technical memoranda, reports, schedules, and figures. * Communicate effectively and coordinate with multidisciplinary project teams (e.g., drafters, designers, engineers). * Perform edits and updates in Revit and AutoCAD models based on engineering changes and markups. * Participate in the full project lifecycle, including design, documentation, and construction support. * Conduct field work such as site investigations and construction observations as needed. * Support data-related tasks including entry, analysis, visualization, and documentation to inform design decisions. * Check design deliverables for consistency, readability, and adherence to standards and specifications. * Provide engineering services during construction, including performance checks and conformity assessments. * Manage and deliver assignments on time, demonstrating strong organizational and time management skills. * Complete an Internship Capstone project demonstrating skill development, learning, and accomplishments gained during the summer internship experience. Work schedule and location: Summer Interns with Brown and Caldwell work a full-time schedule of 40 hours a week and may have the potential for hybrid work schedules and fieldwork Desired Skills and Experience: What Must Our Candidate Have? (Required) * To qualify for an internship, you must be enrolled as a student seeking a degree in engineering (Structural Engineering, Mechanical Engineering, Environmental Engineering, Electrical Engineering, Civil Engineering, Chemical Engineering, or a related field), science, geology, or a related field. * You must be enrolled for the 2025-2026 academic year and plan to continue in Fall 2026. * You also must maintain a minimum cumulative GPA of 3.0 on a 4.0 scale. Salary Range: The hourly pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: Hourly $18.40 - $25.20 Location B: Hourly $20.20 - $27.70 Location C: Hourly $22.00 - $30.20 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act #Intern26

Gray AES is looking for an Architecture Design Intern for Summer 2026 in our Fullerton, CA office. Responsibilities Why Gray AES? Gray is a family-owned, fully integrated global service provider specializing in engineering, design, construction, digital, equipment manufacturing, and real estate services. Deeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial. At Gray, our purpose is to make a positive difference in people's lives and build a better future. Gray AES, the professional services arm of Gray, is a top-ranked firm offering architecture, engineering, and automation services across the globe. Made up of multidisciplinary teams of architects, engineers, and project managers, these collaborative teams work every day to provide unique, customized solutions for our customers. It's the spirit of our people - the passion, commitment, and a great team environment - that makes our company a great place to work. Visa Sponsorship: This role is not eligible for visa sponsorship. Qualifications Who we want… (Requirements) Completion or in pursuit of college degree. Must possess basic computer skills including the ability to utilize 3D modeling software (i.e. Revit), virtual meeting software, word processing, spreadsheet, and e-mail applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What we expect… (Essential Functions) Assist team members with various duties assigned. Update various records, files and procedures, as assigned. Participate in various job related activities as assigned. Other duties may be assigned. Overtime may be required. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel , or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Overtime may be required. Supervisory Responsibilities This job has no supervisory responsibilities. EEO Disclaimer Our Company will be proactive in employing and advancing qualified individuals regardless of race, color, religion, sex, national origin, age, disability, genetic information, protected veteran status, or any other protected status. #GRAYAES #LI-TK1

About Us HBK Engineering, LLC is a fully licensed, professional engineering design firm headquartered in Chicago, IL with a staff approaching 700 individuals. HBK provides civil, environmental, structural, electrical, subsurface utility, construction support services and permitting facilitation. Since our founding in 1998, we have earned a reputation for delivering outstanding, accurate services in extremely time-sensitive, multilayered environments. That "industry-recognized" performance has propelled our expansion and the ability to provide engineering services in all 50 states. With 25 offices nationwide, including concentrations in the Midwest and on the Coasts, HBK brings together a dedicated team whose main focus is the design and protection of utilities and utility networks. We have successfully performed engineering work for a complete spectrum of utility infrastructure projects providing solutions and construction support from Coast to Coast in areas ranging from complex urban city centers, to rural greenfields, to limited access rights-of-way. In July 2020, HBK Engineering was acquired by Quanta Services. Quanta Services provides infrastructure services for electric power, pipeline, and communications industries and employees over 50,000 people. Quanta's focus on the utility industry and HBK's focus on constructability in our designs has made our integration into the Quanta family of companies seamless. About this Role A Designer at HBK Engineering is a dynamic individual adding their technical expertise to our Ontario, CA Design Team. A successful candidate for this Ontario, CA based role possesses five or more years of experience in Electrical Utility Distribution Design, Transmission Design, Distribution Line construction, or an Electrical Engineering discipline. What You'll Do Design and construction knowledge for Lighting, Underground (UG) and Overhead (OH) Utility systems. Design and engineering services on multiple concurrent projects ranging from single unit to large complex projects with strict adherence to standards and deadlines. Experience in utility Geographical Information Systems, planning database systems, and material ordering systems. Technical expertise and guidance in the identification, analysis and resolution of complex design issues utilizing published construction standards and regulations Effective planning, organizing, scheduling, and monitoring of work activities Thorough and accurate technical reports, correspondence, documentation, calculations, drawings and sketches. Continuous improvement of job-related, technical, and professional knowledge, skills, and performance. Mentorship and collaboration to peers and trainees in a fast-paced team environment Position may require up to 30% travel and being out in the field throughout the SCE service territory including remote regions - the coast, desert, and mountains across California. Occasional lifting of typically less than 40lbs. Work in various weather conditions. Additional duties as needed and/or assigned. What You'll Bring Experience working with current utility industry GIS and WMIS programs as a Service Planner, Engineer, or equivalent field is a HUGE PLUS. Demonstrated experience utilizing pole loading software such as SPIDA, O-Calc, or equivalent including overhead design and engineering principles. Proven AutoCAD, AUD, and/or Microstation skills preferred. We are seeking five or more years of experience in Electrical Utility Distribution Design, Transmission Design, Distribution Line construction. Must be proficient in Microsoft Excel, Word, and Outlook. Must be able to demonstrate excellent values including teamwork Ability to demonstrate good written and oral communication skills Ability to demonstrate effective analytical and problem-solving skills What You'll Get Advanced GIS role with increased technical responsibilities and leadership opportunities Professional development in utility distribution system modeling and advanced GIS applications Mentorship opportunities with junior team members Quality assurance responsibilities including peer review of GIS projects Experience in detailed design tasks and project research activities Advanced training in GIS troubleshooting and corrective action implementation Leadership development through project document preparation and technical reporting Clear career progression pathway within the HBK Organization's GIS Track Opportunity to work on complex projects requiring moderate computations and analysis Field data collection experience and outdoor work opportunities Comprehensive benefits package Advanced preparation for senior GIS roles and project leadership positions. Compensation Range The anticipated compensation for this position is USD $28.00/Hr. - depending on experience and qualifications. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Job Description TECHNICAL DESIGNER - Irvine Founded in 1993, TCA Architects specializes in the planning and design of next generation, high density multi-family housing, retail, mixed-use and signature hospitality developments taking pride in helping shape quality environments for everyone. The firm's collaborative approach and industry leading technological expertise have resulted in award-winning, sustainable projects that respect our communities and the environment. With studios in Irvine, Los Angeles, Oakland and Honolulu, TCA has been recognized for their industry leading expertise in master planning and design for a variety of multi-family, hospitality and mixed-use projects. TCA is looking for a passionate, design oriented individual who is interested in multi-family design to join our growing team. The candidate will assist the Job Captain in the production of construction documents from cartoon set, prepare all general project data sheets, dimension all plans, note & reference all materials & products, draw undeveloped building & wall sections, assemble project details, apply applicable code requirements, and assist with back check. They will also assist with plan check corrections and consultant coordination, transferring hand sketched unit floor plans and elevations into Revit, and assist the PM or JC with services during construction (issue ASI's, RFI's, and review shop drawings). We also prize good hand drawing skills, but require tools such as SketchUp, Revit, Illustrator, InDesign and Photoshop to present our work. A Technical Designer will also support Senior Designers with graphics, 3D modeling, presentations, and design studies. Qualifications: • Multi-family experience preferred • Minimum of 3 - 5 years Revit experience • Working knowledge of building construction Types I, III and V. • Excellent organizational skills • Ability to prioritize & multi-task Education: • Bachelor's Degree in Architecture preferred • On track to be licensed Position Location: The Technical Designer will be working in our Irvine Office. We offer a schedule of working three days in the office and the remaining two days working from home. Salary Range: $28.00 - $38.00/hour ($58,240 - $79,040/yearly) About TCA Irvine: Nestled between the beach and the hub of business headquarters in Irvine, the Irvine studio is conveniently located just one mile from John Wayne Airport with easy access to many of California's major freeways, including the 405, 5, 73, and Pacific Coast Highway (PCH.) Led by Irwin Yau, TCA-OC is the most centralized studio. The staff enjoys being literally sandwiched between two of Southern California's largest fashion and dining destinations (South Coast Plaza and Fashion Island.) The studio's natural light and views of the surrounding mountains help support the flow of creativity, and Studio Directors sit among their team members in an open floor plan to promote interaction and collaboration. Welcome to TCA-OC! Benefits: TCA offers a comprehensive benefits package including medical, dental, vision, 401K, life insurance, paid holidays, vacation and paid time off. We also offer bonus opportunities and the opportunity to work a flexible schedule with half days on Friday. As part of our commitment to our staff's professional development, TCA provides a full library of IDP materials to train and expose young professionals to various areas of architecture and become more well-rounded Architects as they prepare for licensure. TCA also reimburses for successfully completed IDP tests, as well as CA licensing fees. TCA provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability or genetics. Job Posted by ApplicantPro

Interior Design Intern What You Will Do: * Assist in creating concept sketches, digital renderings, and presentation materials, while supporting the design team on active projects * Learn from industry professionals, refine technical and creative abilities, and deliver meaningful design solutions that align with the studio's vision and brand identity * Collaborate with cross-functional teams concerning design efforts What You Will Bring to the Role: * Currently pursuing a bachelor's degree in automotive, transportation, or industrial design * Showcase talent and skill level through a professional and creative portfolio * Strong research skills What Hyundai Can Offer You: * A Global Environment that Fosters Diversity * Competitive Pay * $26 ~ $30/Hour * Flexible Work Hours * Access to the latest software and technology trends used in automotive design, such as 3D modeling software and AI ideation tools * Hands-on exposure to the OEM design process * From concept development and digital visualization to model making and final presentation Other Details: * Candidates applying for positions with Hyundai KIA must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. * HATCI is an Equal Opportunity Employer including Disabled and Veteran. VEVRAA Federal contractor.