Interior designer jobs in Redlands, CA

REPORTS TO: TECHNICAL DESIGNER STATUS: NON-EXEMPT Boot Barn is where community comes first. We thrive on togetherness, collaboration, and belonging. We build each other up, listen intently, and implement out-of-the-box ideas. We celebrate new innovations, congratulate one another's achievements, and most importantly support each other. At Boot Barn, we work together to make a positive impact on the world around us, and by working collectively with encouragement, we consider ourselves “Partners.” With the values of the West guiding us, Boot Barn celebrates heritage, welcomes all, and values each unique Partner within our Boot Barn community. Our vision is to offer everyone a piece of the American spirit - one handshake at a time. The Associate Technical Designer supports the Technical Designer in all aspects of technical design to ensure that products meet established standards for fit, quality, and consistency. This role works closely with the Technical Designer to prepare fittings, measuring garments, reviewing patterns, and clearly communicating accurate fit comments to vendors. The ideal candidate is proactive, detail-oriented, highly organized, accurate, and possesses strong communication skills. They should be self-motivated and capable of working independently in a fast‑paced, collaborative environment. Essential Duties and Responsibilities Support the Technical Designer in all areas of the technical design process Organize, measure, and prepare samples for fittings Review patterns and garment construction to ensure consistency, accuracy, and alignment with approved blocks and design intent Assist Technical Designer with developing technical packages and creating specs Attend fittings, take detailed notes, and translate fit corrections into clear actionable fit comments Attend meetings as needed, at the manager's discretion, to support team priorities. Support communication with cross functional partners and vendors as needed. Maintain organized records of histories such as samples, fit archives, block libraries, and more. Demonstrate accountability, attention to detail, accuracy, and willingness to learn. Demonstrates high level of quality work, attendance and appearance. Demonstrates high degree of professionalism in communication, attitude and teamwork with customers, peers and management. Adhere to all local, federal and state laws in addition to Company policies, procedures, and practices. Perform any other duties that may be assigned by management. Qualifications Bachelor's degree in Fashion/ Technical Design or a related field is strongly preferred An associate's degree in Fashion or Technical Design may be acceptable when combined with equivalent professional experience Minimum of 2-4 years of work experience in Technical Design Comprehensive knowledge of patternmaking principles and garment construction fundamentals Proficiency in Adobe Illustrator, experience with Gerber and Centric PLM is a strong plus Must be extremely well organized, work well under pressure and be a strong problem solver Self-motivated, proactive, and able to take initiative Capable of managing multiple priorities and deadlines in fast‑paced environments Excellent written and verbal communication skills Positive, collaborative attitude and strong interpersonal/teamwork skills Strong comprehension skills and ability to absorb and act on complex information Excellent written and verbal communication skills Competencies Ensure Effective Communication - Listens carefully and attentively to others' opinions and ideas. Communicates information clearly, concisely, and professionally. Establish Trust - Follows through on commitments. Is honest and direct with others. Promotes a culture of respect for, commitment to, and compliance with Company values, beliefs, and standards. Ensures the protection of confidential information. Boot Barn Benefits & Additional Compensation Opportunities Competitive hourly rate. Merchandise discount: 50% off of Exclusive Brands and 40% off of third-party brands. Paid Time Off plan for year-round Boot Barn Partners.** Medical, Dental, Vision and Life Insurance.** 401(k) plan with generous company matching. Flexible schedules and work/life balance. Opportunities for growth at every level - we are opening 50+ new stores each year. **For eligible Boot Barn Partners PAY RANGE: $30.00 - $35.00/hr* *compensation varies based on geography, skills, experience, and tenure Physical Demands In general, the following physical demands are representative of those that must be met by a Partner to successfully perform the essential functions of this job. Reasonable accommodations may be made to allow differently abled individuals to perform the essential functions of the job. Standing, walking and squatting less than fifty percent of the work shift. Required to lift, move and carry up to 40 pounds. Ability to read, count and write to accurately complete all documentation and reports. Must be able to see, hear and speak in order to communicate with partners and customers. Specific vision abilities include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Manual dexterity required using hands to finger; handle, feel and type; reach with hands and arms. [ ] Sedentary: Limited activity, no lifting, limited walking [ X ] Light: Office work, some lifting, bending, stooping or kneeling, walking [ ] Moderate: Mostly standing, walking, bending, frequent lifting [ ] Arduous: Heavy lifting, bending, crawling, climbing Work Environment In general, the following conditions of the work environment are representative of those that a Partner encounters while performing the essential functions of this job. Reasonable accommodations may be made to allow differently abled individuals to perform the essential functions of the job within the environment. The workspace is clean, orderly, properly lighted and ventilated with the proper safety compliance. Noise levels are considered moderate. Boot Barn, Inc. reserves the right to make exceptions to modify or eliminate this document or its content. This document supersedes all previous policies, procedures or guidelines pertaining to this subject. Our core value of community bands us together in supportive and inclusive ways to drive our collective success. Boot Barn provides equal employment opportunity to all applicants and employees without regard to race, color, religion, sex, sexual orientation, age, national or ethnic origin, veteran or military status, disability, as well as any other protected status under the law. Americans with Disabilities Act (ADA) - Boot Barn will provide reasonable accommodations (such as a qualified sign language interpreter or other personal assistance) with the application process upon your request as required by applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Boot Barn Store or Distribution Center or reach out to Human Resources at **************, Option 4. California Privacy Notice

RVCA Mens Associate Designer As part of the mens design team, the Mens Associate Designer position will be tasked with blending aesthetic vision and consumer insights to develop innovative and market-relevant apparel. By interpreting seasonal trends, refining silhouettes and fits, and selecting quality materials, this role ensures each piece resonates with the brand's identity and the target audience's lifestyle. Collaborating closely with merchandising, development, and production teams, the Men's Associate Designer helps bring concepts from initial sketch to finished product, contributing to a collection that drives both brand differentiation and commercial success. Key Duties: Design Development: Create designs for mens apparel, including sketches, CADs, and tech packs based on leadership direction. Collaborate with the Design Manager to ensure collections align with brand vision and seasonal direction. Techpack and review trim development Fabric & Trim Selection: Work with Development to source and select appropriate fabrics, trims, and materials to achieve the desired look, feel, and functionality. Prototyping & Fit: Work with development and tech design teams to create prototypes and conduct fit sessions. Make revisions to designs based on fit and construction feedback. Trend Research: Stay informed on market trends, consumer behavior, and competitive products to inspire innovative designs. Conduct basic trend research and competitive shop reports to support seasonal concepts. Contribute inspiration pull and assist with mood board development Collaboration: Partner with Design Manager and Art Director to incorporate prints, logos, and embellishments into designs. Ensure work is completed within key calendar deadlines and meets margin requirements Skills: Strong design and research skills, with a keen eye for fit, proportion, color, and fabrication. Understanding of men's fashion trends, consumer preferences, and competitive analysis. Proficiency in design software (Adobe Illustrator, Photoshop) and familiarity with CAD tools. Ability to create detailed tech packs and collaborate with product development teams. Strong communication and presentation skills to articulate design concepts. Qualifications: Bachelor's degree in Fashion Design, Apparel Design, or related field. 1-3 years of experience in apparel design, preferably in men's categories. Portfolio demonstrating strong design aesthetic and understanding of men's apparel. Salary Range: $65,000-$75,000

Join the Pacsun Community Co-created in Los Angeles, Pacsun inspires the next generation of youth, building community at the intersection of fashion, music, art and sport. Pacsun is a leading lifestyle brand offering an exclusive collection of the most relevant brands and styles such as adidas, Brandy Melville, Essentials Fear of God, our own brands, and many more. Our Pacsun community believes in and understands the importance of using our voice, platform, and resources to inspire and bring about positive development. Through our PacCares program, we are committed to our responsibility in using our platform to drive change and take action on the issues important to our community. Join the Pacsun Community. Learn more here: LinkedIn- Our Community About the Job: The primary responsibility is to assist in creating art, repeats, graphics and trims for all junior product categories. A day in the life, what you'll be doing: Design and Illustrate original art across all categories. Design cohesive stories for each delivery and category. Creating original textile prints, recolors, manipulating repeats and scales, etc. Work on placement art such as graphics, embroideries and embellishments. Prepare artwork for production: scaling, color callouts and sending to vendors. Uses Adobe Photoshop and Illustrator to create and setup production ready artwork. Collaborate with designers, merchants and product development. Assist in strike off comments and review with Designers, Merchants and Production, and adjusting art accordingly. Develop trend reports and mood boards, go trend shopping, and stay up-to-date in the Junior market. Reports to our Designer and assists in everyday tasks. Present artwork and ideas in large meetings. Balance multiple projects with time management while being very organized to meet deadlines. Self-motivated, humble, have good work ethic and a team player. What it takes to Join: 1-3 years' experience in textile design and/or graphic design in the apparel industry, focused on junior's market. BFA or BA or other design related degree such as Fine Arts. Proficient in Adobe Illustrator and Photoshop on a Mac platform. Ability to create original graphics and indexed production-ready prints. Ability to multi-task in a fast-paced environment. Proficient in textile design, graphic design, typography, illustration, drawing, painting Passion for design, fashion and art trends, and seeking out newness. Highly organized, Self-motivator / works well with others / team player. Salary Range: $61,929-$69,223 Pac Perks: Dog friendly office environment On-site Cafe On-site Gym $1,000 referral incentive program Generous associate discount of 30-50% off merchandise online and in-stores Competitive long term and short-term incentive program Immediate 100% vested 401K contributions and employer match Calm Premium access for all employees Employee perks throughout the year Physical Requirements: The physical demands described here are representative of those that are required by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to sit; stand; walk; use hands to finger, handle or feel; as well as reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Ability to work in open environment with fluctuating temperatures and standard lighting. Ability to work on computer and mobile phone for multiple hours; with frequent interruptions. Required to travel in elevator or stairwells to attend meetings and engage with associates on multiple floors throughout building. Hotel, Airplane, and Car Travel may be required. Position Type/Expected Hours of Work: This is a full-time position. As a National Retailer, occasional evening and/or weekend work may be required during periods of high volume. This role operates in a professional office environment and routinely uses standard office equipment. Other Considerations: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the associate for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to qualified individuals with disabilities to enable them to perform the essential functions of the role.

Gray AES is looking for an Architecture Design Manager- Life Science Market to join our team in our Fullerton, CA office. Responsibilities Why Gray AES? Gray is a family-owned, fully integrated global service provider specializing in engineering, design, construction, digital, equipment manufacturing, and real estate services. Deeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial. At Gray, our purpose is to make a positive difference in people's lives and build a better future. Gray AES, the professional services arm of Gray, is a top-ranked firm offering architecture, engineering, and automation services across the globe. Made up of multidisciplinary teams of architects, engineers, and project managers, these collaborative teams work every day to provide unique, customized solutions for our customers. It's the spirit of our people - the passion, commitment, and a great team environment - that makes our company a great place to work. Visa Sponsorship: This role is not eligible for visa sponsorship. Who we want… Bachelor's degree from four-year college or university; degree from a technical college; or minimum of seven years related experience and/or training; or equivalent combination of education and experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet, e-mail and Revit applications. May require knowledge of applications specific to the project assigned. Must also possess excellent communication and interpersonal skills. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray AES is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications What we expect… * Review design proposal criteria and facilitate preparation of proposal documents for use by construction personnel, subcontractors, and vendors. * Provide research regarding the project design, along with applicable code and regulatory requirements. * Consults with customer to determine functional and spatial requirements of new structure or renovation, and prepares information regarding design, specifications, materials, color, and equipment. * Prepares the layout of project and integrates engineering elements into unified design for customer review and approval. * Responsible for quality assurance and quality control of design documents for all design disciplines including but not limited to review of documents prepared by Architectural Technicians, sub-consultants and design-build subcontractors. * Prepare and administer design contracts with the customer and/or sub-consultants. * Facilitate design reviews and presentation of current design documents for customer review and approval. * Coordinates design activities with customers and Gray AES sub-consultants. * Facilitate the preparation of schematic, design development, and construction documents and manages construction administration activities for the project. * Develop a design schedule and estimate of A/E costs for projects. * Monitor project design activities to assure compliance with Gray AES standards and procedures. * Manage all administrative tasks related to design for the project. * Manage all costs related to design activities to ensure accurate cost control. * Other duties may be assigned. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $90,000 to $140,000. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime will be required. Some travel will be required. Supervisory Responsibilities May supervise 1 to 3 team members such as Architectural Technicians and Assistant Design Managers. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training team members, planning, assigning, and directing work; provides input for appraising performance; rewarding and disciplining team members; addressing complaints and resolving problems. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #GrayAES #LI-TK1

Job Description Who We Are HMC Architects is an employee-owned design firm with a desire to make a difference in our communities. As a purpose-driven firm based on values, our mission to “design for good” drives everything we do. And our ownership culture creates alignment and increased commitment to that mission, keeping us on track to being successful. What We Do Founded with the purpose of anticipating community needs, HMC aims to create designs that have a positive impact, now and into the future. We focus primarily on opportunities to have the most direct contribution to communities-through healthcare, education, and civic spaces. Job Summary The Designer will assist in the design and development of projects, will produce design presentation material, and will assist in the production and documentation of construction documents. Position Location The position can be located in either Los Angeles, CA or Ontario, CA. This position is eligible for hybrid (office/remote) working arrangement and flexible working hours; requires 3 days in the office and the ability to work from home Mondays and Fridays. Responsibilities Assist in the documentation of project design in Revit such as three-dimensional modeling or material research Assist in organization and generation of working drawings. Support design team and ensure that the design intent is followed through all phases Assist in development of project documents during all phases of the project Assist in development of project marketing interview materials Assist in all aspects of the plan check process Apply accessibility codes to basic drawings Support the construction administration phase of a project by assisting in review of submittals, shop drawings, response to RFI's, and preparation of instruction bulletins for changes Prepare basic "block out" drawings with accuracy and thoroughness, (site plans, floor plans, exterior elevations, interior elevations) from design sketches, and pickup "red marks" prepared by supervisor. Attend professional activities outside the office Estimate hours for assigned tasks and finish tasks within agreed-upon budget hours Participate in office design charettes Other duties as assigned Requirements Architectural degree from an accredited university Minimum of one (1) year experience in architectural design preferred Listen and communicate effectively and professionally Asks questions about assignments when unclear Ability to set goals, prioritize, and plan work activities for self-management and use time efficiently Has working knowledge and understanding for use of HMC equipment and software Ability to professionally communicate both verbally and in writing to give assignments to office support staff, consultants, and vendors Ability to delegate assignments to support staff and always be respectful Be proficient with HMC's documentation and office practice systems Ability to correspond effectively with Architects for Revit files and minor directives Always be professional and respectful in interactions with clients and consultants Demonstrate motivation in seeking new responsibilities and challenges Demonstrate Revit competency in advance commands of editing requirements, drawings set up for any type of project, management and use of all Revit files and resolution of any related Revit issues on HMC Revit platform Understand the organization of the contract documents Possess knowledge of drawing setup, layers, plotting/publishing, dimensions, blocks, attributes, purge/audit/recover, back up files, viewports Understand technical terminology of the architectural and construction industry The salary range for this position is $49,006 - $66,698 The actual offered salary for this position will vary depending on multiple factors including the candidate's qualification, education, position knowledge, work experience, skills, ability, work location, and internal incumbent compensation for similar roles. We do not anticipate individuals hired into this position will start at or near the top half of the range listed; the decision will be based on each individual case. The salary range listed above does not include other compensation elements such as discretionary bonus opportunities, employee stock ownership grants, paid time off, medical insurance, and other wage and benefit opportunities.

California Baptist University ( CBU ) invites nominations and applications for the position of Dean, College of Architecture, Visual Arts + Design ( CAVAD ). Founded in 1950, California Baptist University is a private comprehensive institution located in Riverside, California. Accredited by the WASC Senior College and University Commission ( WSCUC ), CBU offers more than 100 majors, more than 30 graduate degree programs and seven doctoral degrees. Affiliated with California Southern Baptist Convention, CBU is a member of the Council for Christian Colleges and Universities, the Association of Independent California Colleges and Universities and the International Association of Baptist Colleges and Universities. For more information about the university, visit this page ***************************** CAVAD is an established multi-faceted design college dedicated to the integration of Christian thought and practice, cutting-edge design pedagogy, and reflective professional practice. As one of the largest Christian art and design colleges in the United States, CAVAD embraces the entire spectrum of art and design-oriented disciplines where students experience an interdisciplinary approach to learning that offers unique and unlimited opportunities for collaboration, inspiration, and most importantly, a deep and well-rounded education rooted in the Christian worldview. With strong growth in student numbers and program offerings, CAVAD consists of 9 academic programs, 23 faculty, 3 support staff, and approximately 600 students. For further information about the college, please see cavad.calbaptist.edu Position Description. The Dean of the College of Architecture, Visual Arts + Design is the chief academic officer and the administrative head of the school. The Dean holds academic rank and is charged with the administration, academic leadership, and supervision of the operation of the school through its instructional programs, research, publications, and service activities. This administrator must be a visionary who has the demonstrated ability and entrepreneurial mindset to execute a strategic plan. The Dean reports directly to the Provost/Senior Vice President for Academic Affairs and serves on the Provost's Council. Qualifications Required qualifications include 1) A demonstrated mature Christian faith aligned with CBU's foundation as a Christian institution committed to the Great Commission, 2) demonstrated experience and knowledge of integrating Christian faith with the theory and practice of art, design, or creativity, 3) an earned terminal degree from an accredited institution in a field related to the work of CAVAD , 4) progressive administrative experience in higher education, 5) knowledge of accreditation bodies, 6) an outstanding record of leadership and service to the community, and 7) an outstanding record of academic activities including university teaching, research, retention, fiscal management, strategic planning, and enthusiasm and the ability to contribute to substantial development and fundraising efforts. The successful candidate is expected to assume duties July 1, 2024.

Job Description The Interior Designer provides design and consultative services to clients and internal sales staff for commercial furniture interior design. The designer is a valued professional member of the team, bringing knowledge, aesthetics, and creative ideas that improve company results through workstyles, trends, products, and space. Job Type: Full-time, exempt, (On-Site position) Specific responsibilities include: Attends client meetings/planning sessions to review project scope and assess programming needs. Review documents and analyze building plans/site conditions to assure accurate space requirements. Conducts field measurements, existing furniture inventories, and code analysis. Conceptualize design solutions and prepare drawings based on information received from the client and sales team. Develop/present space plans and furniture typicals that address the programming/needs analysis. Responsible for the development and accuracy of project drawings and furniture specifications Use CET and Project Matrix to create working drawings, renderings, and accurate specifications. Present schematic layouts, preliminary and final design layouts, presentation media, and proposed specification lists, to be provided to the client. Select, develop, and present color and finish options including finish presentations and renderings. Lead Live Design presentations for clients. Required to self-check all project documents (drawings, specs, renderings) prior to submitting for double-check process. Responsible for transmitting complete and accurate project documentation to the team for order entry and installation. Provide working drawings to third-party contractors as needed (A&D firm, GC, electrician, IT, etc.) Request quotes and drawings from ancillary vendors. Able to estimate time to complete project scope of work for budgetary purposes and complete weekly timesheet for accurate billing. Provide timely and accurate information for clients/vendors. Attends weekly team meetings and all required company/department functions and training. Demonstrate full knowledge of the application of codes, and electrical and data planning on projects. Full knowledge of technology tools required to perform duties (CET, NetSuite) and attend regular training. Qualifications + Skills: Bachelor's degree in Interior Design or Architecture Minimum 2-5 years of commercial design experience Intermediate to Advanced AutoCAD/CET proficiency & Project Matrix Demonstrated space planning and project management ability. Experience with Haworth products preferred. Polished communication skills Excellent interpersonal skills PeopleSpace is a market leader, providing workspace strategy, contract office furniture, custom solutions, and architectural wall products. We have over 25 years of success in creating environments to improve the well-being, culture, engagement, and retention of both our client's employees and our team members. As one of Haworth's top global dealerships, we boast the largest dealership footprint on the West Coast with five Customer Experience Centers. PeopleSpace is a dynamic and rising organization that provides great upward mobility for individuals who are looking to learn, grow and find a long-term home. We offer great benefits and foster an inspired company culture based on our core values. Visit us at peoplespace.com to learn more regarding the positions. PeopleSpace provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Should you need assistance filling out an application or applying for a position at PeopleSpace, please contact our HR department at PeopleSpace. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Gray AES is looking for an Architecture Design Manager- Life Science Market to join our team in our Fullerton, CA office. Responsibilities Why Gray AES? Gray is a family-owned, fully integrated global service provider specializing in engineering, design, construction, digital, equipment manufacturing, and real estate services. Deeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial. At Gray, our purpose is to make a positive difference in people's lives and build a better future. Gray AES, the professional services arm of Gray, is a top-ranked firm offering architecture, engineering, and automation services across the globe. Made up of multidisciplinary teams of architects, engineers, and project managers, these collaborative teams work every day to provide unique, customized solutions for our customers. It's the spirit of our people - the passion, commitment, and a great team environment - that makes our company a great place to work. Visa Sponsorship: This role is not eligible for visa sponsorship. Who we want… Bachelor's degree from four-year college or university; degree from a technical college; or minimum of seven years related experience and/or training; or equivalent combination of education and experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet, e-mail and Revit applications. May require knowledge of applications specific to the project assigned. Must also possess excellent communication and interpersonal skills. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray AES is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications What we expect… Review design proposal criteria and facilitate preparation of proposal documents for use by construction personnel, subcontractors, and vendors. Provide research regarding the project design, along with applicable code and regulatory requirements. Consults with customer to determine functional and spatial requirements of new structure or renovation, and prepares information regarding design, specifications, materials, color, and equipment. Prepares the layout of project and integrates engineering elements into unified design for customer review and approval. Responsible for quality assurance and quality control of design documents for all design disciplines including but not limited to review of documents prepared by Architectural Technicians, sub-consultants and design-build subcontractors. Prepare and administer design contracts with the customer and/or sub-consultants. Facilitate design reviews and presentation of current design documents for customer review and approval. Coordinates design activities with customers and Gray AES sub-consultants. Facilitate the preparation of schematic, design development, and construction documents and manages construction administration activities for the project. Develop a design schedule and estimate of A/E costs for projects. Monitor project design activities to assure compliance with Gray AES standards and procedures. Manage all administrative tasks related to design for the project. Manage all costs related to design activities to ensure accurate cost control. Other duties may be assigned. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $90,000 to $140,000. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime will be required. Some travel will be required. Supervisory Responsibilities May supervise 1 to 3 team members such as Architectural Technicians and Assistant Design Managers. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training team members, planning, assigning, and directing work; provides input for appraising performance; rewarding and disciplining team members; addressing complaints and resolving problems. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #GrayAES #LI-TK1

This dynamic and demanding position will require a personable candidate with experience in designing interiors for large-scale ground-up and renovation projects in the education, civic, corporate, or health-care sectors. You will join a collaborative team of project designers, production architects, landscape designers, and engineers, and will be expected to lead interior design projects and collaborate with and mentor junior designer. The ideal candidate should possess exceptional interpersonal skills, robust technical abilities, be an effective presenter of ideas and concepts, have knowledge of interior finishes, and demonstrate strong leadership qualities. This position is located in our Anaheim, CA office. Your Impact: * Provide leadership in all project phases from initial development to completion and assist in the design and documentation of interior spaces. * Create design concepts and continue the development through all design phases. * Responsible for interior finish materials selections, specification, and production of finish material boards. * Utilize space planning, knowledge of codes, understanding of mechanical systems, etc. * Produce construction documentation, construction administration, and review of submittals. Here's What You'll Need: * A minimum of 5-7 years of professional experience. * Bachelor of Interior Design, Interior Architecture, or Architecture (CID or NCIDQ accreditation preferred) * Demonstrated knowledge of Furniture, Fixtures, and Equipment (FF&E) process. * Excellent communication skills, must be able to present design concepts to clients. * Proficient in Revit, Sketchup, Enscape, full Adobe Suite, Twin Motion, Bluebeam Revu, Office 365. Knowledge of Lumion, D5, Rhino, and grasshopper a plus. Here's How You'll Stand Out: * NCIDQ or CID Interior Designer, registered in the state of your office is a plus. * Experience with furniture specifications and procurement a plus. * K12, Higher Education, Civic, and Corporate design experience strongly preferred. * Ability to work well while juggling and prioritize multiple projects, often against multiple deadlines in a diplomatic manner. * Strong knowledge of lighting design and consultant coordination preferred. * Strong devotion to customer service. The actual offered base salary for California locations will vary depending on factors such as individual qualifications, education, experience, skills, job-related knowledge, work location, and internal equity. We would not anticipate that the individual hired into this role will be at or near the top half of the range provided, but the decision will be dependent on the factors of each individual case. The compensation package may also include incentive compensation in the form of discretionary bonuses in addition to base salary and a full range of medical, financial, and other benefits. The salary range for this position is below. $59,977.00 - $89,966.00 PBK is an Equal Employment Opportunity employer. All qualified applicants can be considered for an opportunity without regard to sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, criminal history, or any other characteristic protected by law. Additionally, it is our policy to provide equal employment opportunity in all phases of employment in compliance with all applicable federal and state laws, rules, and regulations.

Throughout our worldwide network of experts, clients and communities, we are renowned for our leadership in fire protection engineering - a legacy of responsibility we have proudly upheld since 1939. Today, our expertise extends broadly across closely related security and risk-based fields - from accessibility consulting and risk analysis to process safety, forensic investigations, security risk consulting, emergency management, digital innovation and more. Our engineers and consultants collaborate to solve complex safety and security challenges, ensuring our clients can protect what matters most. For over 80 years, we have helped mitigate risks that threaten lives, property and reputations. Through technology, expertise and industry-leading research, we remain dedicated to our purpose of making our world safe, secure and resilient. At Jensen Hughes, we believe that creating and sustaining a culture of trust, integrity and professional growth starts with putting our people first. Our employees are our greatest strength, and we value the unique perspectives and talents they bring to our organization. Our wide range of Global Employee Networks connect people from across the organization, supporting career development and providing forums for individuals to share experiences on topics they're passionate about. Together, we are cultivating a connected culture where everyone has the opportunity to learn, grow and succeed together. Job Overview We are seeking a highly skilled and experienced Fire Alarm Consultant/Designer to join our team in Anaheim, CA. The ideal candidate will play a key role in designing, planning, and overseeing fire alarm systems for a variety of projects, ensuring compliance with industry standards, local codes, and customer requirements. This individual will bring technical expertise, leadership, and attention to detail to deliver high-quality fire protection solutions. Responsibilities Develop detailed fire alarm system designs. Utilize CAD, Revit, or other design software to produce accurate, code-compliant drawings and submittals. Ensure designs meet all applicable local, state, and national fire codes. Perform site surveys to inspect and evaluate building features and systems. Prepare technical reports, specifications, design drawings and presentations. Stay current on relevant changes to fire protection regulations and standards. Collaborate with project managers, engineers, architects, contractors, and AHJs to ensure seamless integration of fire alarm systems into overall building designs. Review designs for accuracy, compliance, and constructability before submission. Ability to work independently as well as part of a team to meet project and business objectives. Assist our Business Development team in identifying, pursuing, and securing project opportunities. Manage technical project performance including project scheduling and resource management to meet our business objectives. Manage financial project performance by developing accurate project budgets while adhering to approved scopes of work. Qualifications Five (5)+ years of experience designing fire alarm systems for an array of project types. NICET Level III or IV certification in Fire Alarm Systems is preferred. Professional Licensure in Electrical or Fire Protection Engineering is a plus. Proficiency in AutoCAD, Revit, or similar design tools. Strong understanding of NFPA codes and local fire codes. Experience with mass notification systems or integrated life safety solutions. Strong analytical and problem-solving skills. Exceptional attention to detail and organizational skills. Excellent verbal and written communication abilities. Ability to manage multiple projects and project teams while meeting client deadlines. #LI-KS1 Please note that the salary range provided is a good faith estimate for the position at the time of posting and note a guarantee of compensation. Final compensation may vary based on factors, including but not limited to, responsibilities of the job, education, experience, knowledge, skills, and abilities, geographic location, internal equity, alignment with market data. Jensen Hughes offers a competitive total rewards package, which includes a retirement plan, healthcare coverage, and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position and location. National Pay Range$102,000-$149,000 USD Jensen Hughes is an Equal Opportunity Employer. Qualified candidates will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. The security of your personal data is important to us. Jensen Hughes has implemented reasonable physical, technical, and administrative security standards to protect personal data from loss, misuse, alteration, or destruction. We protect your personal data against unauthorized access, use, or disclosure, using security technologies and procedures, such as encryption and limited access. Only authorized individuals may access your personal data for the purpose for which it was collected, and these individuals receive training about the importance of protecting personal data. Jensen Hughes is committed to compliance with all relevant data privacy laws in all areas where we do business, including, but not limited to, the GDPR and the CCPA. Additionally, our service providers are contractually bound to maintain the confidentiality of personal data and may not use the information for any unauthorized purpose. *Policy on use of 3rd party recruiting agency for direct placements Jensen Hughes will occasionally augment a recruiting search through agencies for certain positions when business conditions warrant. Jensen Hughes will not accept resumes, inquiries or proposals from recruiting agencies as an acceptable method to consider a candidate. 3rd party recruiting agencies must sign a standard Jensen Hughes agreement after being evaluated and accepted by a Human Resources or Talent Acquisition manager, or member of the talent acquisition team. Hiring managers and employees of Jensen Hughes are not authorized to accept resumes, engage in fee-based searches through recruiting firms or sign a search agreement. Please note this policy does not apply to “staffing firms” or firms that are involved with hiring temporary staff. Any recruiting agency interested in being considered may contact our recruiting team at jensenhughesrecruiting.com.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary As a Lead CMF Designer at the Rivian Design Studio, you will drive the aesthetic vision for our vehicles, accessories, and energy products. You will be a vital part of a team that creates and executes world-class products, pushing the boundaries of material innovation and translating our brand philosophy into a tangible experience. You will be involved in every aspect of the CMF design process, from trend research and story creation to material development and final production. Success in this role requires a demonstrated ability to create compelling and innovative solutions, while collaborating with global suppliers and cross-functional teams to ensure successful implementation. Responsibilities Lead the CMF vision for our entire product ecosystem, defining the creative direction for vehicle interiors, exteriors, and Adventure Products. Drive material innovation through advanced research, exploring everything from traditional materials like polymers and metals to textiles, wood, and beyond. Manage the entire CMF process from concept through production, ensuring design intent is upheld through color and material development and final implementation across all commodities. Forecast and analyze future material trends to inform and develop cohesive CMF strategies for upcoming product development. Establish and maintain strong relationships with suppliers and vendors, identifying new resources and managing a comprehensive internal library of innovative materials and finishes. Create high-quality visualizations using industry-standard software (Vred, Blender, Keyshot, and AI tools) to effectively communicate CMF concepts. Benchmark competitive vehicles and support the broader design team in setting design direction. Partner with engineering, mastering, and design quality teams to ensure the final product flawlessly reflects the original design intent Qualifications Your portfolio is a critical component of your application. Please provide a link and any necessary credentials that allow us to review your work in this space. Submissions without a portfolio will not be reviewed. A Bachelor's Degree in Industrial Design, Textile Design, CMF Design, or equivalent professional experience with evidence of exceptional ability. 6+ years of professional CMF design experience with a strong portfolio. Relevant experience in the automotive industry, including familiarity with its development and manufacturing processes. Superior color acuity, with a proven ability to score 16 or lower on the Munsell Hue Color Test. Proficiency in design and visualization software, including Vred, Blender, Photoshop, Illustrator, InDesign, and KeyShot. Proven ability to leverage emerging technologies such as Adobe Substance, Cinema 4D, Figma, and AI tools to enhance the design process is a plus. Proven expertise in materials research and development. Strong communication and relationship-building skills, with the ability to clearly articulate a design vision and foster cross-functional collaboration. A keen eye for sophisticated design, high attention to detail, and a passion for creating premium products. Able to manage multiple projects and personal workflows independently with minimal supervision. Demonstrated ability to work collaboratively across teams and contribute to shared goals. Capable of operating and thriving in a fast paced and dynamic work environment. Pay Disclosure Salary Range Irvine-Based Applicants: $154,000-$192,500 (actual compensation will be determined based on experience, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time and part-time employees, their spouse or domestic partner, and children up to age 26. Full Time Employee coverage is effective on the first day of employment. Part-Time employee coverage is effective the first of the month following 90 days of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Your portfolio is a critical component of your application. Please provide a link and any necessary credentials that allow us to review your work in this space. Submissions without a portfolio will not be reviewed. A Bachelor's Degree in Industrial Design, Textile Design, CMF Design, or equivalent professional experience with evidence of exceptional ability. 6+ years of professional CMF design experience with a strong portfolio. Relevant experience in the automotive industry, including familiarity with its development and manufacturing processes. Superior color acuity, with a proven ability to score 16 or lower on the Munsell Hue Color Test. Proficiency in design and visualization software, including Vred, Blender, Photoshop, Illustrator, InDesign, and KeyShot. Proven ability to leverage emerging technologies such as Adobe Substance, Cinema 4D, Figma, and AI tools to enhance the design process is a plus. Proven expertise in materials research and development. Strong communication and relationship-building skills, with the ability to clearly articulate a design vision and foster cross-functional collaboration. A keen eye for sophisticated design, high attention to detail, and a passion for creating premium products. Able to manage multiple projects and personal workflows independently with minimal supervision. Demonstrated ability to work collaboratively across teams and contribute to shared goals. Capable of operating and thriving in a fast paced and dynamic work environment. Lead the CMF vision for our entire product ecosystem, defining the creative direction for vehicle interiors, exteriors, and Adventure Products. Drive material innovation through advanced research, exploring everything from traditional materials like polymers and metals to textiles, wood, and beyond. Manage the entire CMF process from concept through production, ensuring design intent is upheld through color and material development and final implementation across all commodities. Forecast and analyze future material trends to inform and develop cohesive CMF strategies for upcoming product development. Establish and maintain strong relationships with suppliers and vendors, identifying new resources and managing a comprehensive internal library of innovative materials and finishes. Create high-quality visualizations using industry-standard software (Vred, Blender, Keyshot, and AI tools) to effectively communicate CMF concepts. Benchmark competitive vehicles and support the broader design team in setting design direction. Partner with engineering, mastering, and design quality teams to ensure the final product flawlessly reflects the original design intent

We are seeking a Jnr Sprinkler Designer to join our dynamic team. The ideal candidate will possess a strong understanding of fire protection systems, with a particular focus on sprinkler design. Responsibilities: Develop detailed sprinkler system designs for a variety of building types, including commercial, industrial, residential, and institutional. Perform hydraulic calculations and system sizing using industry-standard software (HydraCAD). Prepare accurate and complete construction drawings, including plans, elevations, sections, and details. Coordinate with architects, engineers, and contractors to ensure the successful integration of sprinkler systems into building designs. Review shop drawings and submittals for compliance with design specifications. Conduct site inspections to verify the accuracy of installation and address any field issues. Stay abreast of the latest codes, standards, and industry best practices related to fire protection. Assist in the preparation of proposals and cost estimates for sprinkler system projects. Mentor junior designers and provide technical guidance as needed. Qualifications: Minimum 0.5 years of experience in fire protection system design, with a strong emphasis on sprinkler systems. Proven proficiency in CAD Thorough understanding of NFPA codes and standards, including NFPA 13, 15, and 25. Excellent communication, interpersonal, and problem-solving skills. Ability to work independently and as part of a team. Strong attention to detail and accuracy. Associate's or Bachelor's degree in Fire Protection Engineering or a related field preferred. Professional certifications (e.g., NICET) a plus.

Interior Design Intern What You Will Do: * Assist in creating concept sketches, digital renderings, and presentation materials, while supporting the design team on active projects * Learn from industry professionals, refine technical and creative abilities, and deliver meaningful design solutions that align with the studio's vision and brand identity * Collaborate with cross-functional teams concerning design efforts What You Will Bring to the Role: * Currently pursuing a bachelor's degree in automotive, transportation, or industrial design * Showcase talent and skill level through a professional and creative portfolio * Strong research skills What Hyundai Can Offer You: * A Global Environment that Fosters Diversity * Competitive Pay * $26 ~ $30/Hour * Flexible Work Hours * Access to the latest software and technology trends used in automotive design, such as 3D modeling software and AI ideation tools * Hands-on exposure to the OEM design process * From concept development and digital visualization to model making and final presentation Other Details: * Candidates applying for positions with Hyundai KIA must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. * HATCI is an Equal Opportunity Employer including Disabled and Veteran. VEVRAA Federal contractor.

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description esigns and produces packaging/labeling for all new and existing products. Conceptualizes multi-lingual packaging/labeling symbols, colors and graphics to create images and combinations that are original, visually appealing and competitive in the marketplace. Documents graphic design content requirements and production processes. Creates, updates, and maintains labeling formats produced with in-house production printing systems that are in compliance with domestic and international regulatory labeling requirements, Health Industry Barcode Communications Council requirements and company standards for high-quality, accuracy, and cost efficiency. Populates product databases for new and existing products. Core Job Responsibilities Responsible for compliance with applicable Corporate and Divisional Policies and procedures. 1. Designs artwork for product labeling (e.g., defines format/graphic requirements) by using departmental computer graphics software from input provided by Regulatory Affairs, Marketing, Engineering and other departments. 2. Recommends and contributes ideas of packaging and labeling strategies to project leaders by utilizing package labeling knowledge gained from historical data and material characteristics. 3. Procures foreign languages translations by forwarding English formatted text to translation agency. 4. Produces artwork packages for procurement for the Materials and Receiving Inspection Departments by compiling all materials needed to produce and inspect the final product. 5. Provides sample labels for filing submissions by printing requested labels. 6. Prepares Change Orders (COs) and specifications for approval by writing EO and specifications for EO originator to obtain approvals. 7. Verifies COs are completed correctly prior to submission to Document Control Archiving by comparing signed EO to printed electronic version of CO. Ensure all pertinent information is included in the package. 8. Keeps up-to-date on technological advances in the marketplace by attending classes/trade shows and reading trade journals. May be required to perform other duties as assigned. Minimum Experience / Training Required Knowledge of regulations and standards affecting 510(k), Class I, II, and III medical devices. Requires a minimum of 4 years experience in a quality or operational area. Qualifications Must have capacity for attention to detail with the ability to recognize errors in spelling, punctuation, and grammar. Must be able to work independently as well as within a team. Good oral and written communication and strong organizational skills necessary. Able to manage multiple tasks and prioritize accordingly to meet challenging deadlines. Must exhibit flexibility in meeting constantly changing demands. Must have good customer focus with ability to influence internal and external groups. Must have experience with word processing, database/spreadsheet and graphics programs. Prior proofreading and labeling development experience is helpful Minimum Education Associates degree or equivalent related experience to ensure basic skills and knowledge of the job requirements and provide the minimal skills needed. Additional Information All your information will be kept confidential according to EEO guidelines.

Architectural Designer The Architectural Designer will oversee the planning and execution of retail store tenant improvement projects, coordinating with internal teams, landlords, and external consultants. The role focuses on leveraging CAD software for design accuracy, managing project timelines, budgets, and compliance with safety and regulatory standards. The Construction Manager will also handle permits, procurement, and on-site quality assurance while ensuring seamless collaboration between departments and stakeholders to deliver successful project outcomes. Responsibilities: Plan, direct, and coordinate store space planning and design development with the Operations team for store tenant improvement projects, ensuring the use of CAD for design accuracy. Collaborate with landlords, A/E consultants, and vendors on project coordination, sublease plans, and tenant permitting. Manage A/E proposals, coordinate with landlords and government agencies on store entitlements, permits, and bidding processes. Review contractor schedules, submittals, change orders, and respond to RFIs. Oversee procurement and installation of owner-supplied fixtures and equipment. Produce project and cost reports; ensure accurate record-keeping and internal coordination with departments such as IT and Marketing. Conduct site visits to monitor construction quality and ensure compliance. Manage construction projects for store improvements, warehouses, and headquarters. Ensure compliance with lease agreements, safety protocols, and regulations. Work effectively and efficiently both independently with minimal direction and as part of a larger, multi-cultural team. Provide regular project updates and reports to stakeholders and management. Mitigate risks, resolve conflicts, and manage change orders to minimize disruption. Ensure compliance with lease agreements and construction regulations. Uphold safety protocols and promote a culture of safety. Stay updated on industry trends, regulations, and best practices in project management. Perform other duties as assigned by management. Qualifications: Bachelor's degree in Construction, Engineering, Architecture, or a related field (Master's degree preferred). 5+ years of experience in commercial construction projects, with a focus on CAD design and integration. Proficiency in CAD software and project management tools (e.g., Bluefin, Procore). Strong understanding of lease agreements and their impact on construction projects. Solid knowledge of MEP systems management and integration using CAD. Excellent communication, negotiation, and interpersonal skills. Strong financial acumen for budgeting and expense management. Problem-solving and decision-making abilities. Ability to work collaboratively with internal teams and external contractors. Strong attention to detail and ability to multitask in a fast-paced environment. Commitment to safety and adherence to regulations.

Embrace Your Possibilities: At Brown and Caldwell, an environmental engineering firm, we're unlocking the potential of water and healthy environments to create thriving communities. Delivering this shared purpose starts with our people: We recruit individuals seeking to develop their skills and gain experience to build a strong foundation for the future. Through an internship at Brown and Caldwell, you'll gain real-life, hands-on experience alongside our employee owners, engineers, scientists, consultants, and constructors who are driving positive changes for our clients and communities. Here you'll find opportunities for impact, community that lifts, support to thrive, and trust in you as you embark on your career journey. So, what's possible for you? Brown and Caldwell offers Summer Internship opportunities to spend a summer working with our team to support the West. We are seeking an individual interested in gaining practical, hands-on experience outside of the classroom. We promise a collaborative environment where you will grow as a professional under the guidance of your people manager and team and be trusted to support project objectives. Our work is interesting, challenging, wide-ranging in nature, and impactful for the communities we live in. We invite you to embrace your possibilities and join us to learn and develop with our team of nationally recognized experts! How Will You Make an Impact? Interns at Brown and Caldwell make a daily, material impact by completing support duties to advance their team's projects and objectives. They receive professional training and the support of their team. Interns can expect to be onboarded, mentored, and developed by industry leaders to develop real-life skills and make an impact on their assigned projects. As a Summer Intern, you can expect your experience to include the following: * Collaborate closely with project managers, engineers, designers, and BIM leads to execute work on water and wastewater treatment and conveyance infrastructure projects. * Assist in the preparation of engineering and design deliverables including drawings, specifications, technical memoranda, reports, schedules, and figures. * Communicate effectively and coordinate with multidisciplinary project teams (e.g., drafters, designers, engineers). * Perform edits and updates in Revit and AutoCAD models based on engineering changes and markups. * Participate in the full project lifecycle, including design, documentation, and construction support. * Conduct field work such as site investigations and construction observations as needed. * Support data-related tasks including entry, analysis, visualization, and documentation to inform design decisions. * Check design deliverables for consistency, readability, and adherence to standards and specifications. * Provide engineering services during construction, including performance checks and conformity assessments. * Manage and deliver assignments on time, demonstrating strong organizational and time management skills. * Complete an Internship Capstone project demonstrating skill development, learning, and accomplishments gained during the summer internship experience. Work schedule and location: Summer Interns with Brown and Caldwell work a full-time schedule of 40 hours a week and may have the potential for hybrid work schedules and fieldwork Desired Skills and Experience: What Must Our Candidate Have? (Required) * To qualify for an internship, you must be enrolled as a student seeking a degree in engineering (Structural Engineering, Mechanical Engineering, Environmental Engineering, Electrical Engineering, Civil Engineering, Chemical Engineering, or a related field), science, geology, or a related field. * You must be enrolled for the 2025-2026 academic year and plan to continue in Fall 2026. * You also must maintain a minimum cumulative GPA of 3.0 on a 4.0 scale. Salary Range: The hourly pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: Hourly $18.40 - $25.20 Location B: Hourly $20.20 - $27.70 Location C: Hourly $22.00 - $30.20 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act #Intern26

About the Role & Program Through innovative storytelling and a culture of collaboration, Disney Live Entertainment creates, produces, and delivers remarkable and engaging entertainment experiences. From the intimate to the spectacular, our work can be seen at Disney theme parks, resort hotels, cruise ships, and other locations the world over! This diverse team - representing a wide variety of disciplines and talents from technical directors, writers, and lighting designers to choreographers, cosmetologists, and music producers - brings magical worlds to life through technical expertise, performance excellence, incomparable ingenuity, unparalleled spectacle… and a dash of pixie dust! This internship is a full-time, six-month commitment in Anaheim, CA, from January 2026 to June 2026. What You Will Do The CAD Design department is accountable for the creation and modification of all computer drafting, graphics, 3D models, and views generated (ground plans, detail drawings, schematic documentation, etc.) that help to tell the stories of our live show offerings, including parades, stage shows and special events on and off the Disney property, and on-board the Disney Cruise Line. We are seeking an individual with an innovative mindset and a passion for Disney-quality creativity. We are seeking someone who will be motivated to ensure that Disney standards are consistently reflected in all design & technical materials. The CAD design intern will focus on two categories of work: CAD Standards Development Building the assets and drawings for the standards Create CAD blocks and building template files, a CAD library of CAD drawings and materials Assisting in creating custom tool palettes of the standard CAD blocks Creating template files that have CAD standards settings, such as layers, fonts, leader styles, etc., already built into them Project Work Assist in creating 3D scans of areas in Disneyland Resort that are requested for projects, learning how to use a 3D scanner Find drawings that are requested for projects using our online documentation database Project drawing initial setup Assist in creating location plan drawings for projects by adding standard CAD blocks for various types of devices (speakers, projectors, data boxes, etc.) Assisting in creating the base template drawings with all settings built in for projects (layers, title block, fonts, etc.) Demonstrating knowledge of basic design, including 2D digital drawings as well as 3D modeling Contributing within the field of information gathering via laser scanning, digital photographs, and physical measurements Contributing to the advancement of Previsualization as part of the design workflow Facilitating a design from an art concept through a bid package as part of a collaborative design process Participating in appropriate Disney Live Entertainment seminars and meetings Coordinating conference room logistics for project/creative reviews and shows Required Qualifications & Skills Basic Experience & knowledge in creating and designing custom AutoCAD blocks & drawings (layers, fonts, leader styles, and annotative scaling) Computer proficiency within a Windows environment, such as MS Word, Excel, and PowerPoint Familiarity with BIM Concepts and processes Experience with Cloud Shared models with Autodesk Revit Familiarity in 3D modeling (Revit, Sketchup, AutoCAD, Rhino) Experience in reading and generating ground plans, sections, and elevations Knowledge of the Entertainment industry, and having a creative background Gaining trust through motivation and communication, and managing conflicting priorities Experience with Unreal Engine and developing VR Experiences Required Materials A portfolio review is required for this position. For full consideration, please include a link to your portfolio on your résumé. Applications without a portfolio link on the résumé will not be considered a completed application packet and may not be fully considered for the position. Please visit our support site for additional information. Education Junior year or beyond Major or previous coursework in Theatrical Design (Facility or Show), Themed Entertainment, or related major preferred Eligibility Requirements & Program Information Candidates for this opportunity MUST meet all the requirements below: Be enrolled in an accredited college/university, taking at least one class at the time of application posting, OR currently participating in a Disney College Program or Disney Internship Be at least 18 years of age Possess unrestricted work authorization Have not completed one year of continual employment on a Disney Internship or Disney College Program Additional Details Be compliant with The Disney Look appearance guidelines Fully available to work full-time hours (approximately 40 per week) and have a consistent, reliable work schedule for the duration of the internship Able to provide/have reliable transportation to/from work Possess a valid US driver's license and be able to operate a company vehicle Able to provide own housing for the duration of the internship program in California Recommendation - Print This Role Description: We encourage applicants to print a copy of this role description so they can refer to it if they are selected for an interview. Please note that this role description is not accessible once the posting is closed. #DisneySpringInternshipsUS The pay rate for this role in Anaheim, CA is $20.42 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: **************************************** Job Posting Segment: Disney Live Entertainment Job Posting Primary Business: Disneyland Resort (DLE) Primary Job Posting Category: Creative Intern Employment Type: Full time Primary City, State, Region, Postal Code: Anaheim, CA, USA Alternate City, State, Region, Postal Code: Date Posted: 2025-10-18

Job Description Do you enjoy communicating with customers, identifying their wants and needs and providing solutions that solve their concerns? At Aire Serv, we have an immediate opening for you as an HVAC Home Comfort Designer! This role includes mostly residential and some light commercial HVAC System Design work. Help design a system of equipment that will meet customers' heating and cooling needs. Designing effective systems includes performing heat gain / loss calculations and piecing together appropriately sized and compatible components that meet customer needs. At Aire Serv, we provide you with the training and systems needed to ensure your success. We are known for our excellent customer service, professional image, and Done Right Promise and we are looking for someone who can partner with us in our pursuit of the highest standards of service and professionalism. If that is you, apply today and an Aire Serv representative will respond soon with more information. Why You'll Want to Join Our Team Here are just a few of the benefits you'll receive when joining Aire Serv as an HVAC Home Comfort Designer: Paid training at our company facility, manufacturer's facilities, and corporate office - Travel, meals, lodging and training costs are covered. Branded company vehicle Fuel card iPad provided with all applications and forms needed to perform duties. Uniforms provided with laundry service Paid time off the first year with increases each year, plus paid holidays Year-round employment Additional earning potential with SPIFFS, commission, and bonuses for performance Career path based on your goals and aspirations Your Responsibilities as an HVAC Comfort Designer As a professional HVAC Sales Associate / Home Comfort Designer, you are a key team member who proactively nurtures customer relationships and helps customers design an HVAC system that will meet their home comfort needs. Deliver World-Class Customer Service- Wow customers with your friendly, personable approach and quality presentation of design options. Perform heat gain / loss calculations and utility cost projections to inspire confidence that what you're offering will meet customer needs. Lead Generation and Conversion - Respond to inbound lead opportunities, perform follow up calls, attend networking events and cultivate quality relationships that yield positive sales results. Advise on System Upgrades, Improvements, and Service Plans - Ask questions and listen intently to understand customer wants / needs and identify system equipment options that exceed customer expectations. Provide options for financing, complete paperwork, file for warranties and create customers for life with your thorough service. [What We Want from You Culture alignment Rockstars only Bought into the vision Meets our expectations, which are…] To Succeed in this Role Employ our Home Comfort Design system to consistently generate quality outcomes and 5-star reviews. Be driven to provide the highest level of customer service and satisfaction while responding to a variety of situations from day to day and staying organized. Be committed to continued training, taking advantage of company-provided opportunities, and investing time into your personal and professional development. How We'll Measure Performance Punctuality, Reliability, and Availability - These things impact our customers and the rest of the team. Opportunity Outcomes - Provide relevant system solutions and options that turn relationships into sales. Efficiency - Stay organized and manage your time effectively to ensure desired outcomes and deadlines are met. Customer Satisfaction - You will be responsible for delivering an amazing customer experience and ensuring high customer satisfaction. How to Know If This is the Job for You You are team oriented. When you join Aire Serv as an HVAC Comfort Designer, you will be part of our local team and a larger community of like-minded professionals. You love a smooth process. Our Comfort Designers follow our Aire Serv process, ensuring a consistent and amazing experience for our clients, while growing their income and career. You excel in building customer relationships. You cultivate high quality interpersonal relationships and thrive in customer interactions. You care about meeting the wants and needs of others. Job Requirements These are the minimum requirements to be considered for this position. Valid driver's license and clean driving record Excellent organization and time management skills Excellent communication skills with customers and office team Professional appearance and personality Benefits & Pay The estimate pay range for this position is $97,000 to $200,000 and is based on your sales performance. Previous knowledge in sales or HVAC is preferred, but not required. We're looking to hire only the best. So if that's you, apply today. If you meet the requirements for the position, our system will schedule you for an interview immediately.

Boot Barn is where community comes first. We thrive on togetherness, collaboration, and belonging. We build each other up, listen intently, and implement out-of-the-box ideas. We celebrate new innovations, congratulate one another's achievements, and most importantly support each other. At Boot Barn, we work together to make a positive impact on the world around us, and by working collectively with encouragement, we consider ourselves “Partners.” With the values of the West guiding us, Boot Barn celebrates heritage, welcomes all, and values each unique Partner within our Boot Barn community. Our vision is to offer everyone a piece of the American spirit - one handshake at a time. The Associate Designer is responsible for documenting all design work and communicating with factories overseas and domestically. This role will also support development and creating collateral materials such as photos, tech packs, graphics and line sheets for all categories of private brand merchandise. Essential Duties and Responsibilities Assist in the designing commercially viable products, seasonal presentations with trend inspiration, silhouettes, fit, wash, embroidery, dry process, trims, color palettes and wash ranges Research, design and develop raw materials, fabric, print development, graphic design and trim within the time and action calendar Create and manage line sheets and tech packs including sketch, colorways, construction details, and complete bill of materials Actively participate in fit sessions and update sketches and tech packs promptly with needed revisions Communicate with sourcing partners/factories in regard to all details of the product by utilizing complete tech packs, commenting on lab dips, prints and graphics, hand looms, strike offs, and knit downs while meeting deadlines Track all prototypes and pre-production samples utilizing the communication (WIPs) dates and calendars Partner with vendors, designers and project management to ensure fabrics, design details, and garments are within cost parameters while providing value to the apparel collections Assist with the hand off to the product manager (hand off final production tech packs, files, and approvals) Demonstrates high level of quality work, attendance and appearance. Demonstrates high degree of professionalism in communication, attitude and teamwork with customers, peers and management. Adhere to all local, federal and state laws in addition to Company policies, procedures, and practices. Performs any other duties that may be assigned by management. Qualifications Strong communication, customer service, time management and organizational skills. Degree or diploma in Design Minimum of 2-4 years of work experience in a Design department or studio Demonstrate illustrative skills through Photoshop, Illustrator and In Design PLM/WebPDM experience Must be extremely well organized, work well under pressure and be a strong problem solver Self-motivator with good initiative Experience meeting multiple deadline Competencies Customer Centric/Sales Driven - Assesses customer experience within the store and promotes a culture of customer engagement. Is attentive to customers and understands their needs, offers products that are aligned with the consumers' expectations. Continually searches for ways to improve customer service. Ensure Effective Communication - Listens carefully and attentively to others' opinions and ideas. Communicates information clearly, concisely, and professionally. Establish Trust - Follows through on commitments. Is honest and direct with others. Promotes a culture of respect for, commitment to, and compliance with Company values, beliefs, and standards. Ensures the protection of confidential information. Boot Barn Benefits & Additional Compensation Opportunities Competitive hourly rate Merchandise discount: 50% off of Exclusive Brands and 40% off of third-party brands. Paid Time Off plan for year-round Boot Barn Partners.* Medical, Dental, Vision and Life Insurance.* 401(k) plan with generous company matching. Flexible schedules and work/life balance. Opportunities for growth at every level - we are opening 50+ new stores each year. *For eligible Boot Barn Partners PAY RANGE: $28.00-32.00 / hr *compensation varies based on geography, skills, experience, and tenure Physical Demands In general, the following physical demands are representative of those that must be met by a Partner to successfully perform the essential functions of this job. Reasonable accommodations may be made to allow differently abled individuals to perform the essential functions of the job. Standing, walking and squatting less than fifty percent of the work shift. Required to lift, move and carry up to 40 pounds. Ability to read, count and write to accurately complete all documentation and reports. Must be able to see, hear and speak in order to communicate with partners and customers. Specific vision abilities include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Manual dexterity required using hands to finger; handle, feel and type; reach with hands and arms. [ ] Sedentary: Limited activity, no lifting, limited walking [ X ] Light: Office work, some lifting, bending, stooping or kneeling, walking [ ] Moderate: Mostly standing, walking, bending, frequent lifting [ ] Arduous: Heavy lifting, bending, crawling, climbing Work Environment In general, the following conditions of the work environment are representative of those that a Partner encounters while performing the essential functions of this job. Reasonable accommodations may be made to allow differently abled individuals to perform the essential functions of the job within the environment. The workspace is clean, orderly, properly lighted and ventilated with the proper safety compliance. Noise levels are considered moderate. Boot Barn, Inc. reserves the right to make exceptions to modify or eliminate this document or its content. This document supersedes all previous policies, procedures or guidelines pertaining to this subject. Our core value of community bands us together in supportive and inclusive ways to drive our collective success. Boot Barn provides equal employment opportunity to all applicants and employees without regard to race, color, religion, sex, sexual orientation, age, national or ethnic origin, veteran or military status, disability, as well as any other protected status under the law. Americans with Disabilities Act (ADA) - Boot Barn will provide reasonable accommodations (such as a qualified sign language interpreter or other personal assistance) with the application process upon your request as required by applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Boot Barn Store or Distribution Center or reach out to Human Resources at **************, Option 4. California Privacy Notice