Inspector jobs at ITS ConGlobal

The Quality Inspector 2 position directly supports the Production Departments through incoming inspection of purchased components and final inspection of finished assemblies and components. Scope/ Supervision and Interaction ☐ Has Direct Reports ☒ Does Not Have Direct Reports Responsibilities * Conducts inspections of products, materials and components at various stages of the production process to ensure compliance with established quality standards * Participates in gathering statistical data from product and processes * Performs visual inspections of soldered connections, mechanical inspections of electronic and electro- mechanical assemblies and subassemblies * Visual inspections of soldered assemblies to IPC-A-610 standards, and harness assemblies. * Prepares and completes all necessary documentation for reporting acceptance/rejection of inspected and/or tested items * Identifies design, process or other inefficiencies and reports quality concerns and issues * Maintains Inspection records * Creates & reviews First Article Inspection Reports (FAIR) IAW AS9102 * Performs Customer source inspection * Issues Authorized Release Certificates/Tags * Maintains Calibration recall and records * Prepare certifications in accordance with appropriate regulation. * Other responsibilities as assigned * Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Physical Requirements * Approximately 75% sitting and 25% standing/walking about in-door Company facilities. * Lift and carry up to 30 lbs. * Use head and neck in static position, looking up/down and side-to-side. * Perform light lifting from floor, table and shelf. * Push and pull carts or mobile tables, loaded and unloaded. * Minimal: heavy lifting from floor or higher, bending, twisting, climbing, lifting arms above shoulders, kneeling. * Minimal: exposure to excessive noise, hazardous chemicals, hazardous equipment, uneven walking surfaces * Typing with computer and keyboard Qualifications * Ability to follow established job instructions and procedures with minimal supervision * Able to apply a systematic QA approach while using existing procedures to solve a range of technical issues * Skilled at using measuring equipment as prescribed by job assignment * Must have knowledge of geometric dimensioning and tolerancing, assembly drawings, parts lists, workmanship standards, standard inspection procedures, wiring diagrams and be able to add tolerances using decimals, etc. * Technical knowledge of Aerospace standards for First Article Inspection Reports, AS9102 * Must be able to interpret and follow written and verbal instructions, including engineering drawings, charts, diagrams, and sketches * Read, write and understand English. * Read technical drawings with multiple views. * Proficient computer skills * Attention to detail * Critical thinking and problem solving * Organizational skills Education & Experience * Education: A Secondary Certificate/High School Diploma or equivalent * Certifications: Vocational training, apprenticeships or the equivalent experience in related field beneficial * Experience: 2+ years of relevant experience (Aerospace and Electronics environments preferred)

RESPONSIBILITIES: Maintain accurate and up‐to‐date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x‐ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION: Perform inspection on complex parts using a wide variety of measuring and test equipment. Adapt and develop complex inspection set‐ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspections, source inspections, and/or complex surface plate set‐ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Recommend changes to supervision. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout all component part characteristics onto rough or semi‐machined castings, forgings and machine parts to maintain control of machining cycle during manufacturing. CALIBRATION: Perform calibration on complex multi‐function electronic measuring and test equipment. Set‐up calibration test conditions having various circuit requirements interpreting calibration procedures, specifications, manufacturer's instructions, or related documents. Ability to interpret drawings and electronic schematics. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired complex electronic equipment. NONDESTRUCTIVE TEST: Perform daily, weekly and monthly equipment and material checks. Perform pre‐inspection and post‐inspection cleaning. Set‐up equipment and conduct tests. Interpret, evaluate and document inspection results in accordance with approved procedures. Perform complete inspections in accordance with applicable specifications, standards and other contractual documents. Operate X‐ray equipment and film processor. Select the method and technique to be used for a specific inspection. Prepare and verify the adequacy of inspection procedures. Job Requirements: Five years related inspection experience or demonstrated ability to perform described responsibilities. Knowledge of applicable military standards or specifications. Required experience in CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Thorough knowledge of machine shop mathematics including trigonometry. Knowledge of electro‐hydraulic servo systems and the computer IEEE systems. Personal hand tools may be required. Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Responsibilities: Conducts examinations and quality control inspections on products, materials and components at various stages of the production process to ensure compliance with established quality and reliability standards. Participates in analysis statistical data from processes to either confirm compliance with established standards or identify deviations from standards Performs routine visual inspection of soldered connections, mechanical inspections of electronic and electro-mechanical assemblies and subassemblies. Participates in preparing all necessary documentation for reporting acceptance/rejection of inspected and/or tested items. Qualifications: Ability to follow detailed job instructions. Able to apply a systematic Quality Assurance approach while using existing procedures to solve standard problems. Skilled at measuring and using test equipment as prescribed by job assignment. Capable of identifying and independently resolving routine issues. Experience with blueprints, drawings and parts lists. Familiar with the casting, forging, molding, stainless-steel and electronic components use in Aerospace industry. Education & Experience: Education: High School Diploma/Equivalent and work experience that will allow successful performance of job expectations. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 2-5 years of relevant experience Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Material Tester to join our Quality team in Everett, Washington. As an Inspector Material Tester, you will be at the forefront of ensuring the integrity and performance of critical aerospace materials and components. Your expertise in operating advanced testing equipment and interpreting complex specifications will directly impact the quality and safety of our products. This role offers a dynamic environment where precision, analytical skills, and problem-solving are essential, and where your contributions help shape the future of aviation technology. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Receive and prioritize jobs from vendors or stores based on lead instructions or shop procedures. Review inspection plans thoroughly, whether online or paper-based. Verify completeness and accuracy of all necessary documentation, including part numbers, serial numbers, lot numbers, and quantities. Select appropriate test procedures (e.g., shear, tensile, proof load) using software tools and Boeing specifications. Set test parameters and operate Universal Test Machines with proper fixtures to perform material and part tests. Set up and dismantle fixtures, jigs, and attachments using appropriate tools to facilitate testing. Operate various test equipment such as Static Tensile Testers, Oscillating Dynamic Loaders, Dead Weight Testers, hardness testers, extensometers, and stress-strain recorders, loading and unloading specimens as required. Use mathematical calculations (algebra, geometry, trigonometry) to compute test parameters per specifications. Perform a variety of tests including proof load, static load, tensile/compression, tensile/shear, torque inspections, weld procedure qualifications, and drive-ability tests on materials, parts, and assemblies. Verify weights of test items using scales to ensure compliance with specifications. Reject non-conforming materials or parts, document discrepancies citing relevant specifications, and submit reports to the Material Review Board (MRB). Secure non-conforming items to maintain control and traceability. Conduct re-inspections and initiate Reinspection Requests (R/R) as needed, coordinating with Material Review Segregation Area (MRSA) and other inspection groups. Use precision measurement tools (calipers, micrometers, dial indicators) to verify dimensions and compliance. Indicate Quality Assurance acceptance on paperwork and online systems, processing documentation per procedures. Monitor manufacturing processes such as chrome plating and heat treating to ensure quality standards. Ensure all tools and test equipment certifications are current. Interface with internal and external organizations (production, engineering, planning, customers) to resolve process or job-related issues. Assist and train lower-grade employees on functions, methods, and procedures. Work independently to plan, set up, and operate various test equipment to determine material properties such as hardness, tensile strength, compression strength, yield strength, and torque. Prepare and measure test specimens, record data, calculate areas and stresses, and plot stress-strain curves. Adapt and improvise equipment setups as needed. Troubleshoot test-related problems and coordinate with engineering to analyze defects and recommend corrective actions. Initiate and document nonconforming materials, hardware, software, tools, parts, or assemblies according to specifications and procedures. Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance. Utilize blueprints, drawings, specifications, inspection manuals, and mathematical formulas (including trigonometry) to complete assignments. Test raw materials (metals, fabrics, textiles, plastics) and semi-finished materials (castings, forgings, cables, hose, sandwich panels). Conduct proof load tests on miscellaneous equipment such as safety belts, slings, and handling equipment. Refer questionable cases or suggested improvements to lead inspectors or supervisors. Prepare data for test reports as required. Follow inspection procedures to accept or reject materials or parts. Analyze problems involving forces, moments, and stresses. Review manufacturers' technical test reports for accuracy and completeness. Collaborate with engineering, suppliers, FAA, and airline customer representatives to develop and improve testing processes. Coordinate with other departments and customers to accomplish work assignments. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 3+ years of experience reading and interpreting drawings and blueprints 3+ years of experience using precision measurement equipment 3+ years of experience using computers and learning new computer systems Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel Preferred Qualifications: 3+ years of experience in inspection and inspection techniques 3+ years of experience in mechanical testing Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $27.32/hour, with potential to earn up to $57.88/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Dec. 30, 2025 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington. As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations. Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols. You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance. A Color Vision Certification may be necessary for portions of this job. Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures. Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight). Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures. Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments. Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance. Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules. Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks. Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance. Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions. Create production aids as needed to facilitate inspection assignments. Maintain necessary certifications, licenses, and permits required for the role. Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights up to 35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications: 5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience). Must be willing to work any shift; including days, evenings, nights, and weekends. Preferred Qualifications: FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified. 10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience). Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives. Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jan. 12, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington. As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications. Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate. Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks. Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements. Monitor manufacturing processes and document findings as required to ensure compliance with quality standards. Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications. Screen paperwork for options, substitutions, and effectiveness of parts and materials. Identify, investigate, and document discrepancies, reporting them to the shop as necessary. Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records. Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required. Coordinate and complete travelers, investigating and clearing check orders as necessary. Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed. Ensure that certifications for tools, test equipment, and personnel are current and compliant. Assist other employees by providing information and answering questions regarding functions, methods, and procedures. Perform first article inspections and FAA conformities, coordinating results as required. Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES). Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives. Initiate and document any nonconforming materials or assemblies according to specifications and procedures. Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards. Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required. Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers. Refer to rejection tags and trouble reports to identify problems and initiate corrective actions. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 2+ years of experience as a Quality Inspector 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design) Experience working with Microsoft Office (Excel, Word, PowerPoint) Preferred Qualifications: Electrical experience Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement Applications for this position will be accepted until Feb. 20, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Fabrication B to join our Quality team in Puget Sound, Washington. Join our dedicated team as an Inspector Fabrication, where your keen eye for detail will be essential in ensuring the integrity of our fabricated parts and assemblies. In this critical role, you will perform thorough inspections of materials and components. Collaborating closely with Engineering, Quality, and Manufacturing, you will play a key role in evaluating and improving build processes while investigating and resolving defect-related issues. Your expertise in using precision measuring instruments will enable you to assess dimensions and workmanship accurately, while your ability to document nonconforming items will help maintain high standards of production. With a focus on continuous improvement, you will conduct audits and in-process inspections, ensuring compliance with all specifications. If you are passionate about maintaining excellence in fabrication and thrive in a fast-paced environment, we invite you to contribute to our mission of delivering top-quality products. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform inspections of fabricated detail parts, materials, and assemblies for workmanship, alignment, fit, and conformance to blueprints and specifications. Inspect fabricated and machined parts, subassemblies, and tooling to ensure compliance with engineering specifications and quality standards. Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction methods. Investigate and resolve defect-related problems, initiating and implementing project plans for quality improvement. Document any nonconforming materials, hardware, tools, or assemblies according to established specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance with specifications. Verify part numbers, serial numbers, and quantities against required paperwork upon receipt of parts and assemblies. Ensure all paperwork, including drawings and specifications, is complete, accurate, and up-to-date. Select and set up appropriate measuring instruments to check dimensions and workmanship of parts and assemblies. Inspect dimensions and workmanship, including visual weld inspections, according to drawings and specifications. Identify, document, and reject nonconforming parts/assemblies, noting discrepancies and required corrections. Perform re-inspections and initiate Re-inspection Requests (R/R) as needed, communicating with relevant inspection groups. Conduct in-process inspections, audits, and monitor heat treat processes, documenting required information. Verify certifications of tools, equipment, and personnel to ensure they are current and compliant. Handle and dispose of hazardous materials in accordance with safety regulations and contact supervisors for assistance when needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience as a Quality Inspector. 3+ years of experience reading and understanding engineering drawings, blueprints, and specifications. 3+ years of Experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications. 1+ years of experience in metal or composite fabrication in aerospace. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Preferred Qualifications: Experience in Foreign Object Debris (FOD) risk 1+ years of experience inspecting aircraft/aerospace parts, components, and/or assemblies for conformance with applicable drawings, specifications, quality standards, and manufacturing plans. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jan. 12, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington. As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks. Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells. Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required. Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives. Initiate and document any nonconforming materials or assemblies according to specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance. Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements. Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies. Inspect mockups of engineering design changes to ensure adherence to specifications. Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes. Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records. Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required. Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts. Document discrepancies and report them to the appropriate personnel for resolution. Assist in the training and instruction of lower-grade inspectors, providing guidance as needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design). 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators. 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices. Experience as a Quality Inspector. Experience working with Microsoft Office (Excel, Word, PowerPoint). Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Ability to complete Fall Protection Training. Preferred Qualifications: Experience inspecting welds / welds certification Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jan. 30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Category: Mx Inspection Performs inspection on completed maintenance, repair, modifications and other maintenance of aircraft, components and related equipment in accordance with standards and regulations. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Performs assigned inspection functions in accordance with Company and maintenance manual inspections to ensure that aircraft are maintained to prescribed standards of airworthiness. * Accomplishes Required Inspection Items (RII) to ensure maintenance work is done completely and accurately. * Audits completed aircraft maintenance documents to ensure accuracy and completeness. * Completes Detailed Visual Inspections (DVI) and General Visual Inspections (GVI) on completed maintenance. * Performs Non Destructive Testing (NDT). * Grants approval to mechanics to close airplane component after inspection. * Provides guidance, technical support, and training to mechanics. Conducts on the job training. * Assists maintenance with research and interpretation of manuals and technical data. * Performs Structural Defect Reporting (SDR), Fatigue Critical Structure (FCS), and Major Repair Reporting. * Conducts Receiving Inspection and Mutilation of Beyond Economical Repair (BER) of Aircraft Parts. * Uses tools, equipment and test apparatus necessary to assure completion of the work in accordance with accepted industry practices. Verifies that all calibrated tooling is current on its calibration. Evaluates the area and equipment that will be utilized to ensure that safety is not compromised before performing any maintenance action. Applies safety first at all times. * Maintains a clean, safe working environment throughout the work shift. * Updates Supervisor on progress of work performed. Reviews paperwork at the end of shift to ensure that all work accomplished is signed for prior to departing the maintenance facility. Assists with completion of shift turnover reports in accordance with procedures in the GMM. * Completes all department internal company forms, maintenance records, documents, work orders, etc. including performing maintenance computer system transactions as required (MEL, DMI). * Adheres to established work schedule. Participates in shift meetings and briefings as required. * Submits in writing any suggested changes in operational procedures that will enhance safety and cost effective aircraft maintenance. * Accesses Company Intranet to become familiar with and utilize the GMM and aircraft manuals. Ensures part effectivity is correct per aircraft. * Adheres to recurrent training, including required FAA AMT training, and keeps necessary licenses and certification up-to-date. * Reads and acknowledges understanding of maintenance newsletters and Company Emails on a timely basis. * Performs other duties as assigned or required. REQUIRED KNOWLEDGE, SKILLS AND ABILITIES The requirements listed below are representative of the knowledge, skill, and/or ability necessary to perform this job. EDUCATION and/or EXPERIENCE * High school diploma or equivalent. * FAA Airframe and Powerplant license. * RII certificate. * At least 1 year of experience. * Experience using a computer to look up information and input data. PREFERRED EDUCATION and/or EXPERIENCE * Previous experience as an A&P mechanic or airline experience. * Non Destructive Testing license. * Quality assurance experience. OTHER REQUIREMENTS * A stable employment history. * Must have and maintain a valid Driver's License and a clean driving record. * Must possess the required tools. * Able to work both in a team setting and individually. REGULATORY * Able to pass an FAA required 10 year work history review and pass criminal background and fingerprint checks. * Willing to submit to and pass FAA and Company mandated random drug and alcohol tests. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively and be understood before groups of associates of the organization. REASONING/PROBLEM SOLVING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several variables in standardized situations. DECISION MAKING Possess decision making skills. Makes limited decisions and determines best methods to solve problems by referring to established precedents and policies. Impact of decisions is moderately low. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Able to stand, walk, use hands to finger, handle and feel, reach with hands and arms at least 90% of the time. * Able to climb or balance, stoop, kneel, crouch and crawl up to 60% of the time. * Able to lift up to 50 pounds at least 35% of the time. * Able to lift or move 75 pounds over 70% of the time. * Must be able to see to perform work and to see approaching vehicles, aircraft and machinery. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Work near moving mechanical parts, work with fumes or airborne particles over 90% of the time. * Work in high, precarious places up to 50% of the time. * Work around toxic or caustic chemicals up to 30% of the time. * Withstand risk of electric shock and work with explosives up to 10% of the time. * Work in outdoor weather conditions inside and outside an open air hangar as well as the airport terminal up to 100% of the time. * The work environment can be very loud. * Able to wear a respirator and protective equipment for testing and regular duties. This includes minimal facial hair in order to ensure proper fit in of respirator in accordance with OSHA regulations. * Able to work nights, evenings, weekends and holidays to support 24 hour operations. TRAVEL REQUIREMENTS Able to travel up to 50% of the time, including overnight stays. EQUAL OPPORTUNITY EMPLOYER, DISABILITY, AND VETERAN ACCOMODATIONS All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Equal Opportunity Employer, Disability and Veteran Accommodations All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

**Job Category:** Mx Inspection Performs inspection on completed maintenance, repair, modifications and other maintenance of aircraft, components and related equipment in accordance with standards and regulations. _To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions._ + Performs assigned inspection functions in accordance with Company and maintenance manual inspections to ensure that aircraft are maintained to prescribed standards of airworthiness. + Accomplishes Required Inspection Items (RII) to ensure maintenance work is done completely and accurately. + Audits completed aircraft maintenance documents to ensure accuracy and completeness. + Completes Detailed Visual Inspections (DVI) and General Visual Inspections (GVI) on completed maintenance. + Performs Non Destructive Testing (NDT). + Grants approval to mechanics to close airplane component after inspection. + Provides guidance, technical support, and training to mechanics. Conducts on the job training. + Assists maintenance with research and interpretation of manuals and technical data. + Performs Structural Defect Reporting (SDR), Fatigue Critical Structure (FCS), and Major Repair Reporting. + Conducts Receiving Inspection and Mutilation of Beyond Economical Repair (BER) of Aircraft Parts. + Uses tools, equipment and test apparatus necessary to assure completion of the work in accordance with accepted industry practices. Verifies that all calibrated tooling is current on its calibration. Evaluates the area and equipment that will be utilized to ensure that safety is not compromised before performing any maintenance action. Applies safety first at all times. + Maintains a clean, safe working environment throughout the work shift. + Updates Supervisor on progress of work performed. Reviews paperwork at the end of shift to ensure that all work accomplished is signed for prior to departing the maintenance facility. Assists with completion of shift turnover reports in accordance with procedures in the GMM. + Completes all department internal company forms, maintenance records, documents, work orders, etc. including performing maintenance computer system transactions as required (MEL, DMI). + Adheres to established work schedule. Participates in shift meetings and briefings as required. + Submits in writing any suggested changes in operational procedures that will enhance safety and cost effective aircraft maintenance. + Accesses Company Intranet to become familiar with and utilize the GMM and aircraft manuals. Ensures part effectivity is correct per aircraft. + Adheres to recurrent training, including required FAA AMT training, and keeps necessary licenses and certification up-to-date. + Reads and acknowledges understanding of maintenance newsletters and Company Emails on a timely basis. + Performs other duties as assigned or required. **REQUIRED KNOWLEDGE, SKILLS AND ABILITIES** _The requirements listed below are representative of the knowledge, skill, and/or ability necessary to perform this job._ EDUCATION and/or EXPERIENCE + High school diploma or equivalent. + FAA Airframe and Powerplant license. + RII certificate. + At least 1 year of experience. + Experience using a computer to look up information and input data. PREFERRED EDUCATION and/or EXPERIENCE + Previous experience as an A&P mechanic or airline experience. + Non Destructive Testing license. + Quality assurance experience. OTHER REQUIREMENTS + A stable employment history. + Must have and maintain a valid Driver's License and a clean driving record. + Must possess the required tools. + Able to work both in a team setting and individually. REGULATORY + Able to pass an FAA required 10 year work history review and pass criminal background and fingerprint checks. + Willing to submit to and pass FAA and Company mandated random drug and alcohol tests. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively and be understood before groups of associates of the organization. REASONING/PROBLEM SOLVING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several variables in standardized situations. DECISION MAKING Possess decision making skills. Makes limited decisions and determines best methods to solve problems by referring to established precedents and policies. Impact of decisions is moderately low. **PHYSICAL DEMANDS** _The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job._ + Able to stand, walk, use hands to finger, handle and feel, reach with hands and arms at least 90% ofthe time. + Able to climb or balance, stoop, kneel, crouch and crawl up to 60% of the time. + Able to lift up to 50 pounds at least 35% of the time. + Able to lift or move 75 pounds over 70% of the time. + Must be able to see to perform work and to see approaching vehicles, aircraft and machinery. **WORK ENVIRONMENT** _The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job._ + Work near moving mechanical parts, work with fumes or airborne particles over 90% of the time. + Work in high, precarious places up to 50% of the time. + Work around toxic or caustic chemicals up to 30% of the time. + Withstand risk of electric shock and work with explosives up to 10% of the time. + Work in outdoor weather conditions inside and outside an open air hangar as well as the airport terminal up to 100% of the time. + The work environment can be very loud. + Able to wear a respirator and protective equipment for testing and regular duties. This includes minimal facial hair in order to ensure proper fit in of respirator in accordance with OSHA regulations. + Able to work nights, evenings, weekends and holidays to support 24 hour operations. **TRAVEL REQUIREMENTS** Able to travel up to 50% of the time, including overnight stays. **EQUAL OPPORTUNITY EMPLOYER, DISABILITY, AND VETERAN ACCOMODATIONS** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. **Equal Opportunity Employer, Disability and Veteran Accommodations** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Founded in 1974 and headquartered in Indianapolis, Indiana, Republic Airways is one of the largest regional airlines in North America. Republic operates a fleet of 200+ Embraer 170/175 aircraft and offers scheduled passenger service with 900 daily flights to 80+ cities in the U.S. and Canada. Republic continues to lead the way in innovation and operational excellence for 50 years. The unrivaled work being done by our over 6,000 Associates sets us apart from the competition. We are in an era of growth and untapped potential across the aviation industry. It's an exciting time to be part of our Company, from corporate positions to the flight deck. No matter your role, your opportunities are elevated at Republic Airways. Republic Airways fosters a culture of trust, respect, care and fun. We believe our people and the passion they bring to their work is what distinguishes us. We work to encourage, support and invest in our Associates both professionally and personally. We live and breathe our Vision, Mission, Culture Statement and Guiding Principles - those words are put into action each and every day at Republic.

About Us Endeavor Air is a wholly-owned subsidiary of Delta Air Lines. Flying as Delta Connection, Endeavor operates 141 regional jets on 750 daily flights to 122 destinations in the United States, Canada, and the Caribbean. Headquartered in Minneapolis, Minn., Endeavor has hub operations in Atlanta, Cincinnati, Detroit, Minneapolis, New York, and Raleigh-Durham, and 11 maintenance bases across our network. Our Culture We know that our people are our greatest assets, and we are committed to building a culture where employees love coming to work each day. At Endeavor Air, we foster a diverse, culturally-rich and safe workplace where employees are treated with dignity and respect. With a culture built on safety, excellence, and teamwork, Endeavor offers limitless potential for aviation professionals looking to start or continue their careers. Our team promotes an inclusive environment in all aspects of the airline and our operation. As an EEO employer, we provide opportunities for all qualified candidates without regards to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran, or disabled status. Overview The Inspector performs inspection duties to determine the airworthiness of aircraft. Responsibilities * Responsible for the efficient and economical determination of airworthiness of aircraft maintenance and other work while assigned to Quality Control. * Provide all possible assistance to maintenance operations, including supervision, inspection and training. * Strong oral and written communication skills and abilities. * Computer proficiency using Microsoft Office suite including word, excel and data input functions Perform additional functions that may be assigned from time to time. * Demonstrate behavior in accordance with Endeavor Air "Code of Conduct" in all Company business dealings and decisions. * Demonstrate a high level of focus on customer service. * Must be able use ladders, work stands, lifts, etc. and be able to work on all areas of the aircraft that may require access during performance of duties. * Must have normal color perception and corrected visual acuity of 20/20 to perform non-destructive testing. * Must not have any medical condition that precludes certification as aircraft run/taxi qualified. * Repetitive motion such as: typing on the computer and phone work. * Occasional physical exertion such as: pulling, pushing, reaching, bending, standing, walking, and light lifting of boxes, bags, files, and electronic equipment not in excess of 50 lbs. * Working in hangar or stockroom and subjected to noise such as airport runway, and pneumatic tools. * Computer work in a typical office environment, sometimes sitting for the majority of the day. * A uniform is required, Endeavor provides a uniform allowance. * Safety shoes are required and cost covered by employee Qualifications * High School graduate or GED equivalent. * Must hold a valid Airframe and Powerplant Mechanic's license. * Experience as an Aircraft Maintenance Technician required, inspector experience preferred. * Must demonstrate the maturity, judgment, and analytical ability to objectively perform oversight within all aspects of aircraft maintenance. * Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail. * Strong work ethic, reliable, self-motivated with a positive attitude, and very customer service oriented. * Strong oral and written communication skills are required. * Ability to work scheduled and/or extra hours when necessary including nights, weekends, and holidays. * Must possess a valid driver's license and if position requires use of company vehicle(s), must be insurable under company insurance coverage. * Must have or be able to obtain a valid U.S. passport. * Limited travel may be necessary. * May require annual eye exam as required by FAA. What We Offer Providing world-class service to our customers starts with providing world-class benefits to our employees. Endeavor Air employees receive a competitive total compensation package which includes a variety of benefits to choose from and some of the best perks around. * Free or reduced-rate travel privileges on Delta Air Lines and 80+ air carriers worldwide for employees and eligible family members * Comprehensive Medical, Dental, and Vision Plans * 401(k) with Company Match starting on Day 1 * Operational Performance Rewards (OPR) Program * Life and AD&D Insurance, Short and Long-term Disability, Flexible Spending Accounts (FSA), and voluntary supplementary benefit options FLSA Status Hourly Minimum Position Pay Range USD $33.90/Hr. Maximum Position Pay Range USD $42.00/Hr.

About Us Endeavor Air is a wholly-owned subsidiary of Delta Air Lines. Flying as Delta Connection, Endeavor operates 141 regional jets on 750 daily flights to 122 destinations in the United States, Canada, and the Caribbean. Headquartered in Minneapolis, Minn., Endeavor has hub operations in Atlanta, Cincinnati, Detroit, Minneapolis, New York, and Raleigh-Durham, and 11 maintenance bases across our network. Our Culture We know that our people are our greatest assets, and we are committed to building a culture where employees love coming to work each day. At Endeavor Air, we foster a diverse, culturally-rich and safe workplace where employees are treated with dignity and respect. With a culture built on safety, excellence, and teamwork, Endeavor offers limitless potential for aviation professionals looking to start or continue their careers. Our team promotes an inclusive environment in all aspects of the airline and our operation. As an EEO employer, we provide opportunities for all qualified candidates without regards to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran, or disabled status. Overview The Inspector performs inspection duties to determine the airworthiness of aircraft. Responsibilities Responsible for the efficient and economical determination of airworthiness of aircraft maintenance and other work while assigned to Quality Control. Provide all possible assistance to maintenance operations, including supervision, inspection and training. Strong oral and written communication skills and abilities. Computer proficiency using Microsoft Office suite including word, excel and data input functions Perform additional functions that may be assigned from time to time. Demonstrate behavior in accordance with Endeavor Air “Code of Conduct” in all Company business dealings and decisions. Demonstrate a high level of focus on customer service. Must be able use ladders, work stands, lifts, etc. and be able to work on all areas of the aircraft that may require access during performance of duties. Must have normal color perception and corrected visual acuity of 20/20 to perform non-destructive testing. Must not have any medical condition that precludes certification as aircraft run/taxi qualified. Repetitive motion such as: typing on the computer and phone work. Occasional physical exertion such as: pulling, pushing, reaching, bending, standing, walking, and light lifting of boxes, bags, files, and electronic equipment not in excess of 50 lbs. Working in hangar or stockroom and subjected to noise such as airport runway, and pneumatic tools. Computer work in a typical office environment, sometimes sitting for the majority of the day. A uniform is required, Endeavor provides a uniform allowance. Safety shoes are required and cost covered by employee Qualifications High School graduate or GED equivalent. Must hold a valid Airframe and Powerplant Mechanic's license. Experience as an Aircraft Maintenance Technician required, inspector experience preferred. Must demonstrate the maturity, judgment, and analytical ability to objectively perform oversight within all aspects of aircraft maintenance. Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail. Strong work ethic, reliable, self-motivated with a positive attitude, and very customer service oriented. Strong oral and written communication skills are required. Ability to work scheduled and/or extra hours when necessary including nights, weekends, and holidays. Must possess a valid driver's license and if position requires use of company vehicle(s), must be insurable under company insurance coverage. Must have or be able to obtain a valid U.S. passport. Limited travel may be necessary. May require annual eye exam as required by FAA. What We Offer Providing world-class service to our customers starts with providing world-class benefits to our employees. Endeavor Air employees receive a competitive total compensation package which includes a variety of benefits to choose from and some of the best perks around. Free or reduced-rate travel privileges on Delta Air Lines and 80+ air carriers worldwide for employees and eligible family members Comprehensive Medical, Dental, and Vision Plans 401(k) with Company Match starting on Day 1 Operational Performance Rewards (OPR) Program Life and AD&D Insurance, Short and Long-term Disability, Flexible Spending Accounts (FSA), and voluntary supplementary benefit options FLSA Status Hourly Minimum Position Pay Range USD $33.90/Hr. Maximum Position Pay Range USD $42.00/Hr.

PITT OHIO, a $900 million, high service, highly profitable, transportation solutions provider offering SUPPLY CHAIN, LTL and TRUCKLOAD services is seeking a Freight Inspector Weights and Measures at our Cincinnati, OH Terminal. Moved to Top Rate $28.05/hour after 6 months We offer overtime IMMEDIATELY after 40 hours worked. This position does not require any prior experience! Our team will provide on the job training. PITT OHIO has received countless safety, service, and carrier of the year awards and our highly acclaimed Safety Department is a leader in the transportation industry. Dedication to quality and excellence is our goal at PITT OHIO. We offer competitive wages, medical and prescription insurance with no weekly premiums, vision, dental, 401K, profit sharing, vacation paid at 45 hours per week, pleasant work environment, and much more! Responsibilities Essential Duties Measure freight and enter information into the computer system Perform simple mathematical calculations regarding freight measurements Look up and apply correct classifications to the freight Generate and submit reports regarding freight weights and measures Process all paperwork daily associated with the execution of the job Lift various types of materials including cartons, bags, cylinders, boxes, crates, drums, pipe, bars, rugs, etc. Use common material handling tools will be used (carts, dollies, pallet jacks, and tow motors) to move freight for inspection purposes Work in a safe and professional manner to reduce personal risks and risk to fellow employees Comply with federal, state, and company regulations Be available and willing to work; exceptions require management approval Work in a positive, supportive, and cooperative way at all times Perform other duties as directed or requested Qualifications Minimum Requirements: Previous experience not required Must have command of the English language with the ability to read, write, and communicate effectively with internal and external customers, and perform simple mathematical calculations Must be self-motivated and able to self-manage Ability to use Microsoft Office tools (Excel, Outlook, etc) Standing, walking, pushing, pulling, twisting, carrying, bending, reaching, and lifting both above and below waist level will be required. Heavy lifting will be required. Must possess good math and typing skills A minimum age of 18 years of age. Must pass a NON -Department of Transportation (DOT) physical examination. Must consent to a pre-employment drug screen. PITT OHIO must receive a negative result. Must consent to a ten-year check on work history. Any gap of 30 days or more must be indicated and explained, and you may be asked to provide documentation. Discrepancies may prevent your application from being processed and job offer withdrawn. You will be an at-will employee throughout your employment with PITT OHIO. Nothing in these guidelines, your application or in the employee handbook guarantees employment for any period of time or is intended to be a contract of employment. PITT OHIO is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, religion or other legally protected status. #POE2 Pay Range Starting from USD $24.99/Yr.

Inspector (TFE731) Lead Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Lead Inspector, you will oversee the inspection, release and certification of products processed within production areas of the business unit. Responsible for the certification of products and for aligning the inspection group to meet internal and external customer targets. A portion of assigned working hours, will continue to perform hands-on technical work based on existing qualifications attained as a Technician. What you'll do: Assists Operations Managers with production flow, and planning. Leads, assigns work to inspectors. Reviews work in process and checks completed work to ensure quality and timely completion of job assignments. Eliminates ordinary difficulties encountered in regular job assignments. Demonstrates and encourages a team environment and works with team members to resolve conflicts. Instructs other employees in the proper method and procedures of performing jobs when required. Uses production systems to generate production routings, retrieve technical work instructions, document product condition, requisition material, report labor usage, and report product location and production status. Generates measures of performance (MOP's) and assists with analysis and development of actions. Provides support and guidance to production team and able to troubleshoot issues/problems. Works with the Operations Managers to determine cell inspection training requirements, monitors progress to the plan and addresses any gaps. Assists with maintaining the cell skills matrix and iteration tracking. Provides performance evaluation input to the Operations Managers for inspection team members. Recognizes and understands flight/product safety critical parts and processes. Responsible for immediately reporting any flight/product safety concerns. Participates in pro-active risk analysis of flight/product safety critical parts and processes. Updates and reports out on cost of poor quality. Leads and participates in identification of root cause and corrective actions. Activity promotes CI, monitors progress within the cell and assists where required to ensure goals are met. Acts as the primary liaison with engineering and other production personnel as required to troubleshoot, research, and solve technical problems. Ensures all applicable safety requirements are followed and address any unsafe practices/conditions immediately. Performs hands-on technical work based on existing qualifications attained as Detail and/or Quality Inspector. Position Requirements: Minimum 5 years of experience. Qualified in the detail and/or quality inspection functions. Knowledgeable in the configuration and assembly of the products processed in the cells. Knowledgeable in the assembly methods and techniques used. Proficient in the use of precision measuring instruments. Proficient in dimensional inspection techniques. Demonstrated knowledge of the applicable regulatory requirements relating to maintenance of aeronautical products. Knowledgeable on the documentation completion requirements. Knowledgeable in the quality requirements relating to the production process. Proficient in decision making to ensure compliance to all customers, regulatory and company requirements. Proficient in communication skills. Ability to guide and train other levels of technicians. Expertise with technical documents and manuals including, but not limited to company instructions, company processes, overhaul manuals, service bulletins and OEM manuals. Must be able to read and interpret technical manuals, instructions, blueprints and drawings. Must be proficient in the use of tools, PME, and instruments necessary for the accomplishment of job duties. Must have an understanding and working knowledge of hazardous material handling and disposal. Strong planning, organizational, analytical, interpersonal, oral and written communication skills. Must have demonstrated ability to use good judgment and make sound decisions. Must be authorized to work in the U.S. Preferred Characteristics: Must possess leadership qualities to include demonstrated ability to cooperate and work well with others. Must have ability to perform high quality of work in a reasonable length of time, lead and direct the work of others. Highly proficient with in depth knowledge of products, processes and technical functions within the production cells. Working knowledge of production management computer system and other related internal control systems. Regularly required to sit for prolonged periods. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-GH1

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Summary: The Lead Gate Inspector is responsible for efficiently and accurately coordinating the movement of trucks and containers in and out of the facility while inspecting trailers, chassis, and containers for damage. This role requires excellent communication skills, attention to detail, and the ability to work in a fast-paced environment. Benefits: • Medical (3 plan options) • Dental & Vision • 401(k) • Paid Weekly • Paid Time Off (After probationary period) • Amazing Opportunity for Growth! Key Responsibilities: Gate Operations: - Greet and direct incoming and outgoing trucks, verifying necessary documentation and ensuring compliance with terminal rules and regulations. - Accurately record and update truck and container information in the terminal's computer system. - Issue gate passes, permits, and other required documentation to authorized personnel. - Coordinate with security personnel to ensure the safety and security of the terminal premises. Documentation and Recordkeeping: - Collect and review shipping documents, such as bills of lading, delivery orders, and customs paperwork, to ensure accuracy and completeness. - Enter data from shipping documents into the terminal's computer system accurately and efficiently. - Maintain organized and up-to-date records of truck and container movements, permits, and other relevant documentation. - Generate reports on gate activities, truck turn times, and any other requested metrics. Communication and Coordination: - Communicate effectively with truck drivers, customers, and other terminal personnel to facilitate smooth and efficient operations. - Coordinate with yard personnel to ensure the availability and proper placement of containers for loading and unloading. - Collaborate with customer service representatives to address customer inquiries, resolve issues, and provide timely updates. - Assist in coordinating with external stakeholders, including rail carriers, trucking companies, and regulatory authorities. Safety and Compliance: - Enforce safety protocols and regulations within the gate area, ensuring compliance by all personnel and visitors. - Monitor and report any security concerns, damages, or safety hazards to the appropriate personnel. - Stay updated on industry regulations and best practices related to intermodal rail terminal operations. - Assist in conducting safety and security training for terminal staff and contractors, as required. Customer Service: - Provide exceptional customer service to truck drivers, ensuring a positive experience during their interactions with the terminal. - Address and resolve customer concerns or complaints promptly and professionally. - Assist customers in locating containers and providing necessary information or assistance. Qualifications and Skills: - High school diploma or equivalent. - Valid Driver's license - Previous experience as a gate clerk or in a similar role within the intermodal rail or logistics industry is preferred. - Excellent communication and interpersonal skills. - Strong attention to detail and accuracy in data entry and recordkeeping. - Ability to multitask and prioritize tasks effectively in a fast-paced environment. - Proficiency in using computer systems and data entry software. - Basic knowledge of transportation and logistics operations. - Familiarity with relevant safety and security regulations. - Ability to work independently as well as in a team environment.

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Cross train in other inspection areas * Adhere to AS9100 and other quality standards Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc…) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent * Must meet ITAR definition of US Person(s) * Strong math background * Ability to process and communicate information using Microsoft Office software * Demonstrated oral and written communication skills required * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to clearly communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Perform miscellaneous duties and projects as assigned and required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, and communicate. Will be required to move throughout the facility. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. This post will expire on Friday January 9th, 2026

Trident Maritime Systems, LLC in Newport News, VA is seeking a detail-oriented and experienced Receipt Inspector to join our team in the shipbuilding industry. This position is responsible for inspecting incoming materials, components, and equipment to ensure they meet Navy shipbuilding specifications, standards, and quality requirements. The ideal candidate will have strong blueprint-reading skills, proficiency with precision measuring instruments, and an exceptional eye for detail. Key Responsibilities Inspect incoming shipbuilding materials, components, and equipment upon receipt to verify compliance with purchase order requirements, specifications, and quality standards. Read and interpret Navy shipbuilding blueprints/drawings to confirm material specifications, tolerances, and acceptance criteria. Use precision measuring and testing equipment (calipers, micrometers, gauges, etc.) to verify dimensions, tolerances, and material characteristics. Conduct visual inspections to identify defects, damage, discrepancies, or non-conformities in received materials. Document inspection results, prepare detailed reports, and maintain accurate records of inspections, test results, and any non-conformances. Collaborate with purchasing, logistics, engineering, and production teams to address quality issues, resolve discrepancies, and coordinate corrective actions. Support internal and external audits by providing inspection documentation and participating in quality review processes. Adhere to established quality control procedures, standards, and safety protocols. Stay informed of industry best practices and evolving quality standards related to shipbuilding. Requirements High school diploma or equivalent. Proven experience in reading Navy shipbuilding blueprints/drawings and interpreting material specifications. Strong knowledge of shipbuilding processes, materials, and quality control requirements. Proficiency with precision measuring instruments (calipers, micrometers, gauges, etc.). Exceptional attention to detail with the ability to identify and document defects or non-conformities. Strong written and verbal communication skills for reporting findings and collaborating with cross-functional teams. Ability to work independently in a fast-paced environment with tight deadlines. Familiarity with quality control standards, procedures, and methodologies. Preferred: Certification from the American Society for Quality (ASQ) such as Certified Quality Inspector (CQI) or Certified Quality Technician (CQT). Prior experience in shipbuilding, manufacturing, or materials inspection highly desirable. Previous Non-Destructive Testing (NDT) experience is a plus.

NDT Lvl II Inspector - TIGER Team Department: Modules Division - Quality Assurance Reports To: Primary - Joe Ruiz, QA Manager Secondary- Joel Carroll, Program Manager of Quality Control Effective Date: Immediately Position Summary The NDT Inspector - TIGER Team serves as a critical member of Trident Maritime Systems' Non-Destructive Testing (NDT) technician team and functions as the front line of Quality Assurance under the primary direction of Joe Ruiz, QA Manager, and secondary oversight of Joel Carroll, Program Manager of Quality Control. This position ensures that Trident's products meet all NAVSEA, Newport News Shipbuilding (NNS), and Trident QA standards through precise, disciplined inspection and documentation practices. The Inspector demonstrates strong self-leadership, motivation, and accountability, upholding the highest level of professionalism within the QA department. The NDT Inspector performs Visual Testing (VT & VT Level II), Magnetic Particle (MT), Liquid Penetrant (PT), and Ultrasonic Testing (UT) inspections across ship structures and modular fabrications supporting CVN, VCS/ORP, and DDG programs. This position supports both new construction and overhaul efforts across in-harbor production, shipyard projects, and unit completion evaluations, ensuring compliance, documentation integrity, and inspection readiness. Responsibilities • Perform VT (Visual Testing) and VT Level II inspections on welds, components, and structures to verify conformance with NAVSEA and NNS standards. • Conduct MT (Magnetic Particle), PT (Liquid Penetrant), and UT (Ultrasonic Testing) inspections in accordance with Trident QA procedures. • Review, interpret, and execute inspection procedures, standards, and engineering drawings. • Document inspection results and maintain OQE records in compliance with NAVSEA/NNS requirements. • Support QC efforts during unit completion evaluations to ensure quality readiness for customer acceptance. • Provide in-process inspection support during fitting, welding, and final assembly operations. • Identify and document nonconformities, support corrective actions, and verify re-inspection activities. • Maintain certification and calibration records for inspection equipment and personnel qualifications. • Coordinate with QA/QC management and production teams to ensure inspection readiness and schedule alignment. • Support continuous improvement initiatives and uphold Trident's commitment to quality excellence. Shift Multiple shifts available - flexibility required to support inspection and production operations across all shifts and sites. Requirements • U.S. Citizenship required. • High School Diploma or GED. • Minimum 5-7 years of NDT experience within shipyard or heavy industrial environments supporting NAVSEA or NNS programs. • Must hold or be able to obtain NDT Level II certification in Visual Testing (VT II), with proven experience in Magnetic Particle (MT) and Ultrasonic Testing (UT) inspection methods per NAVSEA Technical Publication T9074-AS-GIB-010/271. • Demonstrated proficiency in performing and interpreting MT and UT inspections in production settings. • Familiarity with ISO, NAVSEA QA documentation and OQE practices. • Ability to read blueprints, weld symbols, and technical drawings accurately. • Capable of working in confined spaces, elevated areas, and lifting up to 50 lbs. • Skilled in Microsoft Office applications (Word, Excel, PowerPoint). • Excellent communication, analytical, and documentation skills. Leadership & Professional Expectations • Exhibit consistent self-leadership, integrity, and motivation, setting the standard for quality performance and professionalism. • Uphold Trident Maritime Systems' values and lead by example in safety, discipline, and work ethic. • Demonstrate accountability for inspection accuracy, timeliness, and cross-department communication. • Foster teamwork between QA, Production, and Engineering to proactively identify and resolve quality concerns. • Take ownership of personal certification advancement, ongoing training, and compliance with QA procedures. • Represent Trident Maritime Systems with professionalism and pride during customer and source inspections. Preferred Qualifications • 5+ years Experience with welding processes such as SMAW, GTAW, and GMAW. • Technical or trade education related to NDT or welding technology. • Direct experience supporting CVN, VCS/ORP, or DDG naval shipbuilding programs.

**5K Sign-on bonus** Americas** Headquartered in Greensboro, NC, with facilities in Lake City, FL, HAECO Americas is a global, world-class aviation company providing services ranging from aircraft maintenance, repair, and overhaul to the manufacturing of aircraft interior products. HAECO Americas is one of the leading aviation corporations in the world. We pride ourselves on safe, high-quality aviation products and services for our customers, as well as security and growth for our most valuable asset -- our people. **Why HAECO Americas** A career with HAECO Americas is your chance to connect with a world leader in aircraft maintenance and interiors. Your career at HAECO will expose you to the best practices of aircraft maintenance on Boeing and Airbus wide-body and narrow-body jets for major airlines and operators. As a HAECO team member, you will learn from the industry's best, pick up new skills, and continue your professional development. We offer a flexible, high-energy work environment with opportunities to innovate, learn and grow - doing work that matters. The sky is the limit on how far your potential could take you at HAECO Americas. HAECO Americas offers an array of benefits designed with the health and welfare of our employees in mind. + Comprehensive Benefit Plans + Health Savings Account + Career Progression Program + Paid Premiums for Certifications/Shifts + Paid Time Off + Employee Discounts + Relocation Assistance (if applicable) + 401k Savings Plan + Employee Assistance Program + Certification Assistance and Tuition Reimbursements + Collaborative and Safe Work Environment **Position Overview** Perform visual and functional inspections of aircraft and components during all phases of maintenance as assigned by Inspection Management. + Inspecting aircraft and components in accordance with instructions for continued airworthiness, reviewing inspection requirements scope and detail, completing visual and mechanical inspections of assigned aircraft areas. + Ensuring all assigned inspections are properly completed in compliance with established policies and procedures and corresponding inspection records, reports, and forms are properly executed prior to releasing products for return to service. + Identifying defects on aircraft systems operations, including but not limited to, engine performance, pneumatic / hydraulics, pressurization, air conditioning, electrical, fuel, and flight controls. Identifying location of discrepancies by using fuselage body stations and butt lines. Interpreting and ensuring compliance with applicable instructions for continued airworthiness. + Inspecting and evaluating work performed by Maintenance Technician ensuring compliance with applicable technical data. + Ensuring safety procedures are followed and potential damage to customer or company property is minimized by overseeing aircraft handling activities, including but not limited to, jacking, fueling, defueling, and towing. + Performing receiving inspection functions for new and continued service parts for serviceability, including but not limited to, verifying part certification, and inspecting for shipping damage and obvious defects. + Performing weight and balance operations using instructions for continued airworthiness and designated equipment. + Ensuring completion of logbook entries and releasing the aircraft for test flight or in-flight operations checks. + Ensure compliance with all applicable FARs, policies, and procedures during day-to-day assignments. + Perform inspections only on products for which they have been properly trained and qualified. + Ensure aircraft and surrounding areas are in a safe condition for the work being performed. + Being authorized to act on behalf of the repair station. + Perform additional duties as may be assigned by the Inspection Lead and Inspection Manager. **What you need: (Requirements)** + High School Diploma or equivalent. + FAA Airframe and Powerplant certificate. + Thorough understanding of FAA 14 CFR parts 21, , 43, 121, 125 and 145. + Five (5) or more years of experience as a technician and/or inspector in a commercial aircraft environment, or previous demonstrated competency with HAECO. (Up to four (4) years Military Aviation may be applied if experience was on transport category type aircraft). + Language (read, write, speak, and understand English). + Subject to noises more than 85 dbs. + Must be able to bend, stoop, kneel, and stand for prolong periods of time, and climb steps, ladders and/or service stands. + Visual acuity must be a minimum of 20/40 corrected and must have full color vision. + Job requires participation in the DOT random drug and alcohol testing program. **Preferred** + General Familiarization Courses. **_"This company considers all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status."_** **Job Details** **Job Family** **Direct** **Job Function** **Inspectors** **Pay Type** **Hourly** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.