Civil Engineer jobs at Intertek - 1455 jobs

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Immediate need for a talented Senior Civil Designer. This is 12+ months contract with potential for project extension opportunity with long-term potential and is in Kansas City, MO(Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID: 26-00347 Pay Range: $50 - $60/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: - A Senior Civil Designer will lead various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of construction documentation and environmental plans as part of a project team. This position will lead various projects with a diverse portfolio of project types and clients. Lead various civil project designs including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control, airports, and facility design. Lead drawing production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity. Lead a variety of assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches. Lead the quality review of designs or sketches and mark-ups on ongoing projects. Present reports, maps, drawings, tests, and other topographical and geologic data to plan design projects. Interpret design codes and specifications related to design requirements. Lead design drawings within scope, budget and schedule. Quality review volume calculations for excavation, dredging, and upland site grading. Incorporate and approve schedules, budgets and project criteria into civil design and layouts for project financial goals. Organize and maintain all revisions of project drawings, plot files and project-related information in a logical and well-structured manner. Train, mentor, and develop staff members. Participate in marketing and client development meetings. Responsible for the civil design QA/QC process. Performs other duties as assigned. Complies with all policies and standards. Key Requirements and Technology Experience: Key skills; Minimum 6+ years of work experience as a Civil Designer. Bachelor's degree in drafting technology or related field. Required Advance understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables. Bachelor Degree in drafting technology or related field and 13 years related experience Required or Associate Degree and 14 years related experience Required or 15 years progressive detailing and design experience. Field experience is desirable. Required Advance understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables. Advance knowledge in design, calculations and design systems. Advance knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks. Work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives. Excellent written & verbal communication skills. Excellent analytical and problem solving skills, and attention to detail. Our client is a leading Engineering & Construction Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. By applying to our jobs, you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Are you an experienced Civil Engineering Technician with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Senior Management Consultant to work at their company in Phoenix, AZ. Position Summary: Functions in a project engineering technician capacity. Under general direction, supports engineering and design teams by developing and modifying technical deliverables. Applies foundational engineering principles and established design practices to create moderately complex design concepts and solutions. Utilizes digital tools and design software (e.g., CAD, BIM, 3D modelling) to create, modify, and maintain technical documentation, drawings, and project deliverables. Provides technical guidance and may offer direction to other engineering professionals and technicians to ensure quality and consistency across project outputs. Primary Responsibilities/Accountabilities: Applies knowledge of standards, systems, document control, departmental guides, applicable codes and client's policies and procedures. May review project requirements and accurately determine the correct format and contents of the required deliverables. Proactively applies the client Quality Program to deliverables. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Reviews design inputs in order to ensure consistency. Assists in ensuring deliverables are in compliance with the specific codes and standards suitable for the project. May apply basic engineering principles and established design practices in developing moderately complex design concepts and deliverables. Begins to apply judgment and make decisions with respect to deliverables and input interpretation. Capable of handling difficult technical assignments within an area of expertise and can provide technical guidance to other professionals. Performs design calculations, detailed material quantities and estimates, and records. May review the deliverables of others. May define work assignments and maintain schedules. May program control systems or participate in other plant start-up activities associated with a specialized area of expertise. Coordinates with other design group personnel to review and exchange project information necessary for design development. May support field activities. Focuses on the needs of internal clients while utilizing an understanding of external clients' main interests and drivers. Proactively seeks and shares knowledge of latest technologies and processes. May apply judgment and make decisions with respect to deliverables and input interpretation. Qualifications: Advanced Autodesk Civil3D is required with the use of pipe/pressure networks, proposed grading surfaces and plan and profile development. Must be familiar with plan & profile drawings, alignments, pipe networks and grading. Typically, a minimum of 5 years of related work experience. Autodesk Civil 3D Autodesk AutoCAD Bluebeam Experience in the appropriate electronic applications and programs required for performing assignments, including but not limited to CADD or other electronic applications. Advanced ability to interpret engineering deliverable content as assigned. Basic knowledge of engineering standards, systems, document control, departmental guides and B&V policies and procedures. Basic industry knowledge and technology trends. Basic knowledge of the company quality program. Basic knowledge of other disciplines. Basic knowledge of construction & constructability practices & principles. Basic knowledge of engineering design principles and applicable design guides related to the assigned engineering discipline.

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Role Title: Civil Structural Engineer - Substations Employment Type: Full-Time, Direct Hire About the Role: Our client is seeking a Civil/Structural Engineer to support the design of high-voltage electrical substations and renewable energy interconnection projects. This role is responsible for producing civil and structural designs, applying applicable codes and standards (NESC, ASCE, etc.), and collaborating with multi-disciplinary teams to deliver high-quality engineering packages. The position involves designing steel structures, concrete foundations, bus support systems, oil containment systems, metal platforms, and fire walls. Additional responsibilities include supporting site layouts, conduit and grounding plans, stormwater management reviews, and permitting documentation. Key Responsibilities: Civil and Structural Design Steel structure design and fabrication drawings Concrete foundation design and detail drawings Oil containment system design Metal grate platform design Fire wall design Structural analysis and documented design calculations Foundation layout plans Bills of materials Design for high voltage (4kV-230kV) and EHV (230kV+) substation projects Substation Design Support General arrangement development Cable trough and conduit plans and details Grounding plans and details Site plan development and review Erosion and sediment control review Stormwater management review Construction documentation, sequencing, and RFP development Technical support for bus fault stress analysis, procurement, and construction Project Coordination Work with physical designers and multi-disciplinary engineering teams Coordinate with substation, transmission, distribution, geotechnical, and survey teams Support stakeholder communication and alignment with project milestones Participate in client technical review meetings Qualifications: Bachelor's degree in Civil Engineering from an accredited program Minimum of 4 years of experience in high-voltage substation civil design Active PE license in at least one U.S. state Proficiency with AutoCAD or Bentley MicroStation Experience with 3D modeling (AutoCAD Civil 3D, MicroStation V8i) Experience with PLSCAD, LPILE, STAAD, or similar structural programs Strong knowledge of substation industry standards and the National Electrical Safety Code (NESC)

Are you an experienced Civil Engineering Technician with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Civil Engineering Technician to work in Dallas, TX. The Virtual Design & Data Solutions (VDDS) Staff Engineering Technician, under general supervision, performs advanced functions requiring technical knowledge and use of electronic applications, standards, and document control processes/procedures in support of creating or modifying deliverables. This role will be responsible for the development of site drainage, grading, and utility plans using Autodesk Civil 3D and Bentley MicroStation. This role will be within the Governments & Water Utilities (G&Wu) group, supporting client needs related to water, wastewater, linear pipelines, and other water-related solutions. Functions in a project engineering technician capacity. Under general direction, supports engineering and design teams by developing and modifying technical deliverables. Applies foundational engineering principles and established design practices to create moderately complex design concepts and solutions. Utilises digital tools and design software (e.g., CAD, BIM, 3D modeling) to create, modify, and maintain technical documentation, drawings, and project deliverables. Provides technical guidance and may offer direction to other engineering professionals and technicians to ensure quality and consistency across project outputs. Primary Responsibilities/Accountabilities: Applies knowledge of standards, systems, document control, departmental guides, applicable codes, and client policies and procedures. May review project requirements and accurately determine the correct format and contents of the required deliverables. Proactively applies the client Quality Program to deliverables. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Reviews design inputs to ensure consistency. Assists to ensure deliverables are in compliance with the specific codes and standards suitable for the project. May apply basic engineering principles and established design practices in developing moderately complex design concepts and deliverables. Begins to apply judgment and make decisions with respect to deliverables and input interpretation. Capable of handling difficult technical assignments within an area of expertise and can provide technical guidance to other professionals. Performs design calculations, detailed material quantities and estimates, and records. May review the deliverables of others. May define work assignments and maintain schedules. May program control systems or participate in other plant start-up activities associated with a specialized area of expertise. Coordinates with other design group personnel to review and exchange project information necessary for design development. May support field activities. Focuses on the needs of internal clients while utilizing an understanding of external clients' main interests and drivers. Proactively seeks and shares knowledge of the latest technologies and processes. May apply judgment and make decisions with respect to deliverables and input interpretation. Qualifications: Advanced Autodesk Civil 3D is required with the use of pipe/pressure networks, proposed grading surfaces, and plan and profile development. Must be familiar with plan & profile drawings, alignments, pipe networks, and grading. Typically, a minimum of 5 years of related work experience. Autodesk Civil 3D Autodesk AutoCAD Bluebeam Experience in the appropriate electronic applications and programs required for performing assignments, including but not limited to CADD or other electronic applications. Advanced ability to interpret engineering deliverable content as assigned. Basic knowledge of engineering standards, systems, document control, departmental guides, and B&V policies and procedures. Basic industry knowledge and technology trends. Basic knowledge of the company quality program. Basic knowledge of other disciplines. Basic knowledge of construction & constructability practices & principles. Basic knowledge of engineering design principles and applicable design guides related to the assigned engineering discipline.

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

MEP Project Engineer - High-Rise Construction (Miami, FL) G&E Partners is partnered with a leading high-rise General Contractor in Miami that is actively expanding its project teams due to a strong pipeline of luxury residential and mixed-use tower projects. This is a fully on-site role supporting complex, multi-story builds and offers long-term career progression within a growing Florida operation. Responsibilities Support MEP scopes across all phases of high-rise construction Coordinate with mechanical, electrical, plumbing, and fire protection subcontractors Review submittals, RFIs, shop drawings, and MEP schedules Track procurement and long-lead equipment (switchgear, generators, chillers, etc.) Assist with inspections, testing, and commissioning activities Work closely with Project Managers, Superintendents, and BIM/VDC teams Maintain documentation and ensure compliance with contract requirements Requirements 1-5+ years of experience in construction, ideally with a GC or large MEP subcontractor Exposure to high-rise, multifamily, hospitality, or large commercial projects preferred Strong understanding of mechanical, electrical, and plumbing systems Degree in Construction Management, Engineering, or related field preferred Comfortable working fully on-site in Miami Why Join Career-defining high-rise projects (30+ to 100+ stories) Strong project backlog and long-term stability Clear path into MEP Project Management Competitive salary, bonus, and full benefits package

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Ampcus Inc. is a certified global provider of a broad range of Technology and Business consulting services. We are in search of a highly motivated candidate to join our talented Team. Job Title: Engineer-Transport - III. Must Have Skills (Most Important): Experience in the telecommunications industry. Technical knowledge of long distance, ultra-long haul and OTN mesh networks. Equipment Knowledge specific to Sonet/SDH, ULH, OTN mesh and WDM transport. Vendor Specific Knowledge: Ciena, Infinera, Fujitsu and varied long haul networks. System Knowledge: BGW or Granite (XNG), CoFEE(Canvas), Nautilus, ICON, CCP, Venue, 3GIS/FIMS. Job requirements specific to engineering and design of ultra-long-haul transport. Experience managing complex processes and driving results. Experience with window-based programs and corporate database systems. Desired Skills: Strong understanding of engineering specs and drawings. Knowledge and experience with both equipment inventory and design. Strong working knowledge of the legacy network operating systems. Ability to assess, identify, and mitigate risks that could impact the business or project. Enjoy analyzing problems with autonomy to select and implement right solutions. Work well independently; but also, team player able to ensure best outcomes. Manage assignments & competing priorities, staying focused on important deadlines. Experience with window-based programs and corporate database systems. Job Duties: The Transport Engineer will be responsible for monitoring, planning, implementation, test and turn up of Long Distance (LD) Ultra Long Haul (UHL) transport network. The engineer will work to define, plan, and engineer LD ULH transport system overbuilds to include fiber acquisition, fiber testing, equipment acquisition, equipment install, system test and turn up. This will include the deployment of fixed grid, flex grid as well as next generation LD ULH transport. Responsibilities: Engineer LD ULH transport builds. Respond to high failure rate systems outages. Free up space and power in support of network growth. Clear housekeeping order-wire from MDE gear. (Prerequisite to initiate a decommission project and power down of equipment). Identify directional system/solution for new order-wire/housekeeping. Monitor and plan LD network utilization and expansion. Engineer and support site decommissioning work. Maintain equipment inventory records and LD transport in engineering and provisioning databases(s). Job requirements and responsibilities are specific to engineering and design of ultra-long haul network transport equipment. Database cleanup to ensure integrity of the system and network. Work w/ peers to ensure performance and delivery to support needs of business and customer. Handle escalations and troubleshoot, as needed. Familiarity with field concepts, practices, and procedures. Stay current on technological evolutions. Education/ Certifications: Bachelor's degree in technical fields or relevant experience. Five or more years of telecom work experience. Ampcus is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veterans or individuals with disabilities.

Join Our Team as a Project Engineer at DCS Contracting! Are you ready to take your career in heavy civil construction to the next level? At DCS Contracting, we're looking for a highly motivated Project Engineer with heavy civil experience to join our dynamic, team-oriented workforce. If you have a passion for construction and want to grow with a company that truly values its people, this could be the perfect opportunity for you! Why DCS Contracting? Founded in 1994, DCS Contracting is a trusted leader in heavy civil construction, specializing in highway, roadway, and underground utility projects across the Greater Phoenix Valley. As a locally owned general contractor, we take pride in self-performing 75% of our work, ensuring exceptional craftsmanship that strengthens our communities for generations. We've built a strong reputation based on quality work and a commitment to a positive, collaborative work culture. With over 200 full-time employees, we're looking for individuals who want to be part of a team that supports each other and takes pride in delivering excellence every day. What We Offer You: Competitive Salary & Bonus: Your hard work will be rewarded with a competitive compensation package. Comprehensive Benefits: Including medical, dental, and vision coverage, 401(k) with company match, paid time off, paid holidays, life insurance, and disability insurance. Company Vehicle & Fuel/Maintenance Card Work-Life Balance: No out-of-town travel required-your work will be based throughout the Greater Phoenix Valley. Career Growth & Development: We provide the training, mentorship, and resources you need to succeed and grow within our company. Supportive Team Culture: Join a team that values collaboration, integrity, and mutual success. What You'll Be Doing: Assist the project management team from pre-construction through project closeout. Help develop and maintain relationships with clients to ensure long-term success. Support the creation and management of project schedules, coordinating with internal teams, clients, subcontractors, and vendors. Ensure compliance with safety policies and OSHA standards across all projects. Assist in managing project activities, collaborating with field superintendents and other resources. Communicate effectively with staff, clients, and business partners to keep projects on track. What We're Looking For: Education: A Bachelor's degree in Engineering, Construction Management, or a related field (or equivalent experience). Experience: At least 1 year of experience as a Project Engineer, ideally with a self-performing heavy civil contractor or similar experience. Skills: Strong ability to read and interpret blueprints. Proficiency in CPM Scheduling, Hard Dollar, and the MS Office Suite (including MS Project). Experience with construction software such as On-Screen Takeoff or Agtek. Knowledge of Bluestake and familiarity with the Arizona Heavy Civil market is a plus. Highly organized and detail-oriented. Excellent communication and teamwork skills. Strong time management abilities to juggle multiple tasks and responsibilities. Why Join Us? At DCS Contracting, we invest in our people because we believe our success is built on the strength of our team. You'll have the opportunity to work on exciting projects, gain valuable experience, and grow your career with a company that values integrity, hard work, and collaboration. How to Apply: Submit your resume online or send it directly to Allison Jackson at **********************************. We look forward to reviewing your application! Additional Information: We conduct E-Verify, Background Checks, and Drug Screenings. DCS Contracting, is an Equal Opportunity Employer. We ensure all qualified applicants receive fair consideration regardless of age, race, color, national origin, sex, sexual orientation, gender identity, disability, or veteran status.

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred

Ampcus Inc. is a certified global provider of a broad range of Technology and Business consulting services. We are in search of a highly motivated candidate to join our talented Team. Job Title: Engineer-Transport - IV. Responsibilities: Perform detailed circuit engineering for network circuit augments/migrations. This includes developing all the specifications required for installation and grooming of circuits. Work with Network Planning, RCAT and Local Operations to ensure migrations are not impacting and successful. Obtain appropriate management approvals for migrations issuing circuit orders and Kirke events, creating applicable designs in appropriate databases along with diagrams/ drawings as needed. Ensure that work meets all applicable engineering, financial, planning, and operational standards. Manage, input, and update central Network Inventory Database to reflect new builds, ads, and decommissions. Must Have Skills: Working knowledge for order creation and circuit engineering in PC, TCOMS, BGW, COMS, SNM, CCP. Submitting RMODs for circuit verifications. Submitting and tracking events in KIRKE. Working knowledge of EASR and LEC order Interfaces. Working knowledge of Maintenance Tracker. Working knowledge of Canvas and applications within. Desired skills: Network Topology. Proficiency in Excel/Google Sheets. Ampcus is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, age, protected veterans or individuals with disabilities.

Adex seeking a Network Engineer to support innovative network solutions. As a Network Engineer, you will support the management and technical deployment implementation of IP network solutions, collaborate with internal and external teams and work independently on projects from start to finish. This includes developing network designs based on user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Essential Functions: Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks. Ensure Carrier HUBs and circuits are accurately recorded in design (MetaSolv/DICE) and operations (FINS, FMS, etc.) toolsets and ensure network POP design documentation accurately reflects as-built configurations. Document design deviations and/or discrepancies and submit ClearQuest PTRs to capture design changes and/or corrections with circuit designs. Support scheduled planned maintenance events (Moves, Adds, Changes) and direct Harris field technicians with the installation and activation of SONET, ancillary equipment, and circuits. Work directly with Telco Carrier and field technicians to isolate and resolve issues with new circuit activations and troubleshooting as required. Follow MetaSolv/DICE workflow processes and update IXC circuit database during IXC circuit installations, activation, changes, and/or disconnects as needed. Provision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Ensure circuits are provisioned IAW circuit design documentation and resolve discrepancies before circuits are released to the customer. Interface directly with internal and external customers and provide technical assistance with service activation and circuit verification testing. Monitor and identify optical network alarms and proactively investigate and identify the root cause to minimize disruption and impact to operational circuits. Provide recommendations for improving processes and procedures and assist in the maintenance and upgrades of controlled documentation. Support scheduled maintenance events during normal operating hours and after hours/weekends as needed. Assist in the collection of data needed to perform analysis of network issues. Assist with the execution of test procedures and provide feedback to ensure procedural steps are correct. Qualifications: Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Prefer 3 or more years' experience working with SONET equipment and Optical Circuits. Specifically, with Cisco ONS-15310, ONS-15454 and Fujitsu Flashwave 4500/9500 platforms Ability to obtain a security clearance Preferred Additional Skills: Have a thorough understanding of NAS Operations ticket management and scheduled maintenance processes and procedures Possess a strong technical understanding of Gigabit Ethernet/Fast Ethernet, DS1/T1, DS3, VT1.5, VTV, STS1, STSV and OC3-OC192 circuit types as well as familiarity with existing processes and procedures associated in provisioning and acceptance testing of these circuit types Have a thorough understanding of trouble tickets, ticket management, and Change Management processes and procedures Experience with Cisco Prime Optical (CPO) and Cisco Transport Controller (CTC) Fujitsu NetSmart Experience with MetaSolv and DICE preferred MEF-CECP certification preferred