INX International Ink Co. jobs in Charlotte, NC - 87839 jobs

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

Merchandisers are critical to our success at FritoLay! Merchandisers are responsible for merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos & many more in stores including supermarkets and large grocery stores. Although you will start out as a Merchandiser for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: * Drive your personal vehicle (with gas mileage reimbursement) to a variety of store locations * Retrieve FritoLay products and merchandise the product throughout the store * Work in a team environment with professional Route Sales Representatives * Follow a consistent schedule with specific start times and customers (You will have the opportunity to attain different work schedules with time!) * Leverage a company issued iPhone to view schedules, communicate with team members, and log activity We operate 24 hours a day, so you may not have a typical schedule, and our jobs are physical! If you have never worked in this environment, it is fun, fast-paced, and physical - you should expect that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: * Be 18 years of age or older * Have a valid driver's license with proof of insurance * Be able to frequently lift up to 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: * 401(k) contribution * Health, dental and vision insurance * Financial support to help obtain a degree * Company discounts and perks All benefits are subject to eligibility terms and can vary based on length of employment, collective bargaining agreement and job status such as part-time or seasonal, as applicable. Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. References Visible links 1. ********************************************************************************** 2. *******************************************************************************************

$2000 retention bonus paid within 1 year of employment (based on performance and eligibility) Route Sales Representatives are critical to our success at FritoLay! Our Route Sales Representatives are responsible for delivering, selling, and merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos, and many more to local stores including gas stations, dollar stores, and large grocery stores. As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Although you will start out as a Route Sales Representative for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: Learn the basics of the role in four to six weeks of dedicated driving and selling training with our amazing team members Run routes for team members', experience different stores, and meet new customers Grow sales on the route by building relationships, selling in displays, and completing national initiatives Attain a route with set days off/schedule with time Work in a fun, fast paced, and physical environment We operate 24 hours a day, so you may not have a typical schedule! Team members often work weekends and holidays. Our jobs are physical! If you have never worked in this type of role before, you should understand that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: Be 21 years of age or older Have a valid driver's license with proof of insurance and ability to obtain other licensures as required by state law Be able to frequently lift 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: 401(k) contribution Health, dental and vision insurance Financial support to help obtain a degree Company discounts and perks Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & View the PepsiCo EEO Policy.

About Omni Omni is a business intelligence and embedded analytics platform that helps customers improve self-service, accelerate AI adoption, and build customer-facing data products. Whether users prefer AI, spreadsheets, SQL, or point-and-click, Omni makes it easy for anyone to explore and act on data - all from the same platform. At the core of Omni's platform is a built-in semantic layer that ensures consistency, trust, and AI readiness. Headquartered in San Francisco, Omni has office hubs in Santa Cruz, Philadelphia, Dublin, and Sydney, with team members around the world. The company has raised $97M in funding from leading investors including ICONIQ Growth, Theory Ventures, First Round Capital, Redpoint Ventures, Google Ventures, Snowflake Ventures, and Databricks Ventures. The Role As a Technical Account Manager, you'll serve as a dedicated, strategic technical advisor for Omni's largest and most complex enterprise customers, partnering closely with Professional Services, Product, and Support teams. Your mission is to help top accounts achieve faster time-to-value, reduce inbound escalations, ensure long term success, and contribute reusable technical assets that scale with Omni's growth. You do this by partnering with Sales and Professional Services to design a scalable implementation plan, knowing and documenting the core use cases and nuances of your customers tech stack, and consistently working to ensure that all future technical recommendations are scalable as Omni platforms continue to evolve. TAMs blend technical expertise with customer-facing skills. You'll help enterprises embed Omni into their workflows, optimize performance, and expand their use of our BI platforms. Your work will directly influence adoption, retention, and expansion at scale. Responsibilities Act as the primary technical advisor for our top enterprise customers. Partner with Professional Services, Product, and Support teams to ensure customers achieve faster time-to-value and sustainable adoption. Guide customers on best practices for architecture, integrations, embedding, and data modeling. Proactively identify technical risks and create mitigation plans to reduce inbound escalations. Lead technical enablement workshops, health checks, and design reviews for customers, and internally to increase the subject matter expertise on the team. Help customers optimize query performance, dashboard usability, and user adoption. Serve as the technical voice of the customer internally, influencing product roadmaps and support processes. Build and maintain reusable implementation assets (templates, playbooks, technical documentation) that scale across Omni's customer base. Partner with Sales and Customer Success Managers to surface cross-sell and upsell opportunities through technical insight. Provide technical validation in expansion and renewal cycles. Influence Net Dollar Retention (NDR) by demonstrating the scalable value of Omni. What We're Looking For 5+ years in a technical customer-facing role (Customer Success Engineer, Technical Account Manager, Solutions Architect, or Data Consultant). Deep knowledge of data & analytics technologies: SQL, semantic layers, data warehouses (Snowflake, BigQuery, Redshift), BI platforms, APIs, embedding strategies. Strong architectural thinking: able to map complex data ecosystems to Omni's platform. Excellent communicator-comfortable engaging both C-level execs and data engineers. Consultative and proactive, with the ability to span multiple enterprise accounts. Strong problem-solving and attention to detail. Bonus Points Experience driving adoption and expansion in a SaaS analytics/BI environment. Familiarity with customer success frameworks and metrics (GRR, NDR, adoption KPIs). Track record of influencing enterprise technology strategy. Comfortable working with global teams and customers across time zones. Compensation & Benefits On Target Earnings (OTE): $145k-$208k, 70/30 salary-to-variable split. Comprehensive health, dental, and vision coverage. Equity in a fast-growing company. Flexible, collaborative work environment. #J-18808-Ljbffr

The production associate is responsible for performing a variety of production focused tasks on a rotated basis to support the daily production goals in department At Butterball, we exist to help people pass love on. As the most recognized name in turkey, the brand represents more than 60 years of cherished memories, providing quality, great tasting products that make meals something to celebrate every day. We proudly believe that life at Butterball means having a team who supports you, having the opportunity to grow personally and professionally, and making an impact on the health of others daily. Whether you choose to work at one of our five (5) manufacturing facilities in NC, AR, MO, farms in AR, NC, and KS, corporate office in NC, IL, or in the field, we believe we have an opportunity for everyone to succeed. At Butterball, we believe in fostering a culture where every team member is valued, has the opportunity to grow professionally and contribute to our success. Join us in our Purpose and apply for an opportunity today! Key Responsibilities •Will be required to rotate to various functions within the processing department and perform any job in the department at the supervisor's discretion. •Assigned job duties may change and vary day-to-day depending upon production needs Minimum Qualifications (Educations & Experience) ·Must be at least 18 years of age and legally authorized to work in the United States ·Must pass a background check, drug screen ·Must be willing and able to perform physical requirements of the job with or without reasonable accommodation. Essential Knowledge, Skills, and Abilities •Process product using tools and equipment provided •Follows all work safety policies and guidelines •Observes equipment operation, notifying appropriate personnel of any malfunctions and/or safety issues/concerns •Adheres to all USDA and GMP (Good Manufacturing Processes) product standards and guidelines •Maintains a clean and organized work area •Will be required to rotate to various functions within the processing department •Perform various tasks to include repetitive manual labor •Performs other duties as assigned •Ability to communicate effectively and follow verbal and written instructions •Ability to work in a constant state of alertness in a safe manner •Follows all work safety policies and guidelines •Accountable to maintain punctual and regular attendance for scheduled work hours •Will be required to assist in clean up at break times and end of shift Preferred Knowledge, Skills, and Abilities •Able to read scale / properly scale product to correct weight according to specs •Some positions may require the ability to read, write, and/or speak English Physical Demands While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. •Standing (8 hours a day or more) •Lifting, carrying, pushing or pulling (up to and including 50lbs or more) •Reaching overhead (up to and including 25lbs) •Climbing and adjusting stationary stands •Working with scissors •Gripping, grasping and twisting using hands and wrists •Bending and stooping for long periods of time •Working below knee levels for short periods of time while racking Working above shoulder level for short periods while racking Working Conditions & Travel Requirements •Work is performed in a food processing plant with a high noise level, storage coolers/facilities. •Position requires working around processing plant equipment. •Must be physically capable of working extended hours if needed and in a wet environment, standing for long periods of time, and operating processing equipment. •This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment. •The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection. •Work with raw meat •Work in congested work areas Disclaimer We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer.

San Francisco, United States | Posted on 09/30/2025 Welcome to PGMTEK, Inc where we help candidates find the opportunities that best match with their career goals. for a credit professional responsible for preparing credit assessments and managing administrative matters related to credit. Responsibilities Review credit applications and supporting documentation, including appraisal and environmental reports, rent rolls, lease agreements, preliminary title reports, financial statements, tax returns, corporate documents, and compliance requirements. Complete appraisal reviews for new loan applications. Prepare credit assessments for new proposals and renewals. Communicate with frontline teams to collect required documents and revise proposals as needed. Recommend commercial loan and trade service transactions in the GCMS loan system (collateral, customer rating, facility rating, credit limit, loan agreement, and loan advances). Update Bankpoint for pipeline reporting and tracking of new loans. Conduct post-loan booking call-backs, including completion of closing checklists. Participate in property inspections. Review loan documentation to ensure accuracy and compliance with legal and bank policies. Perform additional duties and assignments as required. Adhere strictly to the Department/Bank's code of ethics. Required Education and Experience Bachelor's degree (B.A. or B.S.) from a four-year college or university. Two to five years of related experience and/or training. Equivalent combination of education and experience considered. Additional Qualifications Advanced English language skills. Qualifications Language Skills: Read and interpret policies, procedures, and manuals; write reports and correspondence; communicate effectively with staff. Mathematical Skills: Calculate interest, percentages, ratios, and financial figures. Computer Skills: Proficient in database, word processing, internet, and spreadsheet software. Strong organizational and proofreading skills. Independent judgment and ability to perform high-level tasks. Analytical: Research and synthesize complex information. Problem-Solving: Identify issues and develop solutions. Interpersonal: Maintain confidentiality. Oral and Written Communication: Clear, persuasive, and professional. Teamwork: Open to feedback and collaboration. Supervisory Responsibility None. Physical Demands Primarily a sedentary role requiring use of computers, phones, and other office equipment. Some walking and interaction with staff required. Travel Requirements Occasional travel for property inspections. Other Duties This job description is not exhaustive. Duties, responsibilities, and activities may change at any time with or without notice. Employees may be assigned additional responsibilities as directed by supervisors or managers. Employees are accountable for identifying, measuring, monitoring, and reporting risks proactively to senior management, as well as ensuring ongoing risk management and compliance. #J-18808-Ljbffr

Seeking a highly qualified Building Maintenance Manager to oversee, coordinate and manage the operation and maintenance of all Refrigeration, Boilers, HVAC, Electrical, Plumbing, and Fire/Life systems in a 27/7 commercial food service kitchen, in addition to managing a fleet of hi-lift trucks for aircraft catering, ramp vans, and other company vehicles. Essential Functions: Provide leadership, supervision, and schedule of the Maintenance Team, tasks specific to skills, training in all kitchen facility operations, and encourage ideas, methods, and processes for improvement. The daily operation is to repair and preventative maintenance (PM) of all MEP&R systems, fleet management, maintenance, and energy consumption and analysis. Must maintain daily system performance logs with monthly summaries for Upper Management reviews to predict future expenses and post against annual budgets. Must maintain and perform equipment PM tasks and record updates. Maintain a complete inventory of all major building systems, manage warranty issues, and keep a listing of available outside resources to complement in-house maintenance efforts. Conduct periodic inspections of the complete facility condition and infrastructure to ensure building upkeep and operational readiness-document and report deficiencies with recommended remediation. Create plans, develop, and implement new procedures to improve operations while minimizing costs. Must know requisition tools, equipment, and supplies required for operations. Ensure a safe work environment by watching and reporting on all safety issues, fire alarm status, and emergency systems. Coordinate with all department heads to schedule PMs and downtimes, resulting in minimal disruption to operations. Define the scope of work, bid reviews, and manage small capital projects. Other Responsibilities and duties will include, but not be limited to: Able to perform cycle time, helpful life analysis on major systems components, repair-vs-replacement recommendations, and appropriate record keeping. Able to direct other technicians and match available talents with tasks. Belief and attitude in the importance of cultivating and maintaining a high degree of maintenance, appearance, and customer service at all times. Effectively give and receive feedback; willing to ask questions and seek direction as needed. Must be able to function within a team environment. Must be able to perform tasks under general supervision. Competencies Excellent written and verbal communication. Possess critical evaluation and analytical skills. Leadership. Ethical practice. Critical to have advanced math skills. Ability to read building blueprints. Supervisory Responsibility This position will supervise a staff of maintenance technicians. Work Environment This job operates in a professional office environment, a food production environment, and outdoors. This role routinely uses standard office equipment and tools. Physical Demands The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently sit and stand for long periods and reach with hands and arms. The employee will work indoors and outdoors, with extreme temperatures possible in both environments. Position Type/Expected Hours of Work Full-time on-premise position. Days and hours of work are Monday through Friday, 8:30 a.m. to 5 p.m. This position regularly requires extended hours and occasional weekend work. Travel less than 10% Required Education and Experience Minimum of a B.A./B.S. degree in Engineering or an equivalent combination of education/certification and experience. Current Refrigeration, HVAC, Electrical, Plumbing, and Boiler Certifications Must have a minimum of 10 years in related management and supervisory experience. Must be skilled in reading building design blueprints. Proficiency in Microsoft Office Suite. Experience in managing service contracts. Preferred Education and Experience Experience with AutoCAD. Other Duties This job description does not cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice.

It's official. We're the #1 best place to work in Agriculture, Mining and Utilities awarded by @FinancialReview and @Inventium How can you grow with Nufarm? NuFarm delivers VALUE BEYOND YIELD through dedicated service, locally proven Canola, Carinata, Sorghum and Sunflower seed for farm customers and new plant-based solutions for end-use customers globally. Our industry leading Beyond Yield Carinata and Omega-3 Canola products provide a truly sustainable platform recognizing the ever-evolving environmental challenges our world is facing. All of this is core to our global commitment and what sets us apart. Over 3000 NuFarm employees work across our global locations, including three world-class NuFarm Innovation Centers. The Molecular Biologist is responsible for advancing molecular genotyping platforms and digital systems that enable seed product QAQC, marker discovery, and breeding applications. The role combines hands-on molecular biology, data analysis, and informatics with process innovation and cross-functional collaboration. This position supports global breeding, discovery, seed QAQC, and regulatory programs through the design, execution, and reporting of high-throughput molecular assays and through leadership of digital workflows such as the R&D LIMS. Be part of building a better Nufarm Lead marker validation and deployment across multiple crops, from early screening through assay optimization. Select and curate genetic materials and reference controls to support marker discovery, validation, and QC. Design and execute experiments for new trait markers, ensuring accuracy, reproducibility, and strong documentation. Own end-to-end Seed QAQC genotyping request support for a global supply chain stakeholder network. Manage the full QAQC workflow from sample receipt to traceable, accurate, and on-time report delivery. Investigate and resolve stakeholder inquiries by troubleshooting lab workflows, seed production methods, and genetic profiles. Execute genotyping workflows across KASP, qPCR, GBS, and WGS platforms using wet-lab techniques and automation. Build and manage projects in LGC Kraken LIMS, including sample layout design, controls, and genotype cluster scoring/verification. Analyze genotyping datasets using advanced Excel, R, and/or Python; diagnose data-quality issues and deliver clear stakeholder reports with final QAQC sign-off support. Lead GBS platform operations and improvement (high-throughput sequencing, library prep/indexing, pipeline optimization) while driving digital transformation via LIMS implementation, training, and reference genotype database development. Most importantly, you're positive, results driven, and you thrive off being empowered to own your own outcomes. If you want to be a part of a thriving, supportive environment and are inspired by the prospect of being a part of something bigger, we'd love to hear from you. Nufarm is proud to be recognised as an endorsed employer of choice for all woman by Work180 taking out the #6 spot in 2025!

Under the direction of the Human Resources Manager, the EHS Manager will develop, execute, and oversee comprehensive safety and environmental programs to maintain a culture of EHS excellence and compliance. The EHS Manager will act as a resource for all employees for their safety concerns by responding in a timely manner. ESSENTIAL RESPONSIBILITIES: GENERAL: Follow all Company safety policies and safety procedures in order to maintain a safe work environment. Follow all Company policies, rules and regulations. Act as a professional representative of Wausau Coated Products, Inc. at all times. Coordinate EHS services for the corporate office and manufacturing facility and the other company locations. Work with Company leaders to drive safety culture and support behavioral changes. Establish and promote the maintenance of a safe, incident-free and healthy work environment. Update Company leadership with safety and environmental results reporting, status of current projects, new regulations and potential areas of present or future concern. SAFETY: Maintain corporate compliance with all applicable OSHA safety and reporting regulations. Manage workers' compensation program and injury logs. Lead investigation of accidents and safety-related concerns (i.e. injuries, near misses, damage) and implement appropriate corrective action. Regularly review and update safety initiatives and programs. Conduct and coordinate the results of job safety analysis (JSA) to train employees and assist with the proper selection and placement of employees considering capabilities and/or limitations are suited to the job tasks involved. Set the safety training schedule and prepare training sessions, to include new hire training, weekly and monthly training topics, and annual required training. Coordinate emergency response plans including evacuation and severe weather response, training, and drills. Inspect Company facilities to detect existing or potential incident and health hazards; determine corrective or preventative measures where indicated; follow up to ensure measures have been implemented to ensure compliance with OSHA regulations. Work with property and workers compensation insurance representatives on inspections and risk management programs. Work with occupational health partners to address ergonomic issues and musculoskeletal injuries. Oversee emergency medical responders and injury care. Facilitate Company Safety Committee meetings, i.e. create action items, establish goals, monitor progress, coordinate committee member rotation, and maintain committee meeting minutes. Maintain and update Safety Manual. Maintain safety-related files and records in compliance with local, state and federal regulations, i.e. policies, procedures, training, inspections, audits, incident reports, OSHA Log 300, Safety Committee meeting notes. Oversee the administration of workers' compensation program, including working with the insurance carrier, Company leaders and Human Resources in case management and administering effective return to work program for injured employees to minimize employee lost time and claim costs. Prepare material/evidence for and actively participate in workers' compensation-related hearings, lawsuits and insurance investigations. Responsible for preparation and management of the annual safety budget; manage safety vendors, including safety inventory. ENVIRONMENTAL: Maintain compliance with DNR and EPA environmental regulations including air permitting, hazardous waste, storm water, underground storage tanks, etc. Maintain and monitor hazardous materials per permit requirements. Manage MSDS Online System to include Safety Data Sheet (SDS) review for raw materials. Monitor and evaluate regulatory policies and procedures on a quarterly basis to ensure compliance from all levels of the Company, i.e. hazardous raw materials usage. Update regulatory information on Company-specific product specification sheets, ensuring all environmental/regulatory information is accurate and current. Timely completion of customers' environmental/regulatory surveys and requests for “letters of compliance”. Complete the required bi-annual reporting to maintain compliance with “Reach” program. Actively manage chemical waste disposal, including organization of waste collection area, arranging disposal pickup by partner/vendors, and documentation of chemical waste profiles. Assist with reporting and certification efforts, including but not limited to: UL Testing, CPSIA, PFAS, and heavy metal testing. POSITION REQUIREMENTS: Bachelor's Degree in Safety or Environmental Science is desired. Three (3) to five (5) years experience in a manufacturing environment required. Previous safety management in a manufacturing environment is desired. Professional certification (ASP, CSP, CIH, etc.) preferred. In-depth working knowledge of EHS regulations, including OSHA and EPA Working knowledge of local EHS regulations is required. SPECIFIC SKILLS, LICENSURE AND CERTIFICATIONS: Proficient in local, state and federal safety regulations, including OSHA regulations and practices. Advanced computer skills to include: MS Word, Excel and Outlook. Advanced communication skills to include: person to person, large group presentation, written and phone. Ability to work with multiple priorities, prioritize and organize workload. Good organizational skills, including the ability to handle multiple projects at the same time. Project management experience. Problem analysis and problem resolution. Willingness to be a team player. Ability to maintain confidentiality. Confidence and professionalism in representing the Company.

GMI Cloud is a fast-growing AI infrastructure company backed by Headline VC and one of only six cloud providers worldwide to earn NVIDIA's prestigious Reference Platform Cloud Partner designation . We operate 8 of our own GPU clusters across the U.S. and Asia, delivering a full spectrum of services from GPU compute service to AI model inference API solutions. As an NVIDIA Reference Platform Cloud Partner, our infrastructure meets the highest standards for performance, security, and scalability in AI deployments. We empower AI startups and enterprises to “build AI without limits,” providing everything they need to prototype, train, and deploy AI models quickly and reliably. The Role: As a Sourcing Director /Head at GMI Cloud, you will be a key player in ensuring we have the resources needed to dominate the AI infrastructure market. You will be responsible for developing and executing aggressive sourcing strategies, negotiating fiercely with suppliers, and building a world-class supply chain that is both agile and cost-effective. We need a Sourcing Director who is willing to take ownership, drive results, and make things happen. Responsibilities: Strategic Sourcing: Develop and implement bold sourcing strategies for key categories, including hardware (GPUs, servers, networking), software, and cloud services, with a focus on securing a competitive advantage. Supplier Negotiation: Lead aggressive negotiations with suppliers to achieve best-in-class pricing, terms, and conditions. You will be expected to push back on suppliers and drive for maximum value. Supply Chain Optimization: Identify and implement innovative ways to optimize the supply chain, reduce costs, improve efficiency, and mitigate risks. Supplier Relationship Management: Build and manage strong relationships with key suppliers, but always prioritize GMI Cloud's interests and be prepared to make tough decisions. Cross-Functional Collaboration: Collaborate with engineering, finance, operations, and other teams to align sourcing strategies with business needs and ensure seamless execution. Market Analysis: Conduct in-depth market research to identify emerging trends, new suppliers, and potential disruptions, and proactively adapt sourcing strategies Qualifications: Bachelor's degree in Business, Supply Chain Management, Engineering, or a related field. 7+ years of proven experience in strategic sourcing, preferably in the technology or cloud computing industry. Excellent communication and interpersonal skills, with the ability to influence and persuade stakeholders at all levels and leverage internal resources. A track record of delivering significant cost savings and supply chain improvements. Exceptional negotiation skills and a relentless drive to secure the best possible deals. Strong analytical and problem-solving skills, with the ability to think strategically and execute tactically. Ability to thrive in a fast-paced, high-pressure environment and manage multiple priorities effectively. Proficiency in sourcing software and tools. A "get it done" attitude and a passion for driving result.

About the Company Palmer Hamilton, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, genetic information, or any other status protected by applicable federal, state, or local law. About the Role The Production Supervisor - Weld & Fabrication is responsible for leading and managing welding and fabrication operations to ensure production goals are met safely, efficiently, and within budget. This role oversees day-to-day shop floor activities, focusing on productivity, quality, and team development. The Production Supervisor will drive continuous improvement initiatives, uphold company safety standards, and foster a culture of collaboration and accountability. The ideal candidate will have strong leadership experience in welding and fabrication environments, a deep understanding of lean manufacturing principles, and the ability to motivate teams to achieve excellence in performance and quality. Responsibilities Lead daily operations of the Weld and Fabrication departments to meet or exceed production, quality, and safety goals. Analyze, interpret, and report on production statistics and departmental performance metrics. Develop, implement, and maintain cost reduction and process improvement initiatives to optimize efficiency. Oversee scheduling and staffing to meet production demands while ensuring proper utilization of resources. Ensure compliance with safety standards and participate in safety audits, training, and continuous improvement activities. Collaborate cross-functionally with engineering, maintenance, and quality teams to identify and resolve operational challenges. Supervise and coach production employees, including conducting performance reviews, addressing personnel issues, and fostering professional growth. Implement and sustain lean manufacturing, 5S, and other continuous improvement practices to enhance workflow and minimize waste. Maintain accurate production and labor records in accordance with company and regulatory standards. Conduct regular team meetings to review department goals, communicate updates, and address concerns. Support the implementation and maintenance of robotic welding, flat panel, and tube laser systems, ensuring optimal performance and uptime. Promote and model Palmer Hamilton's core values, including integrity, collaboration, and commitment to quality. Perform other duties as assigned to support plant operations and company objectives. Qualifications Education & Experience: Minimum of 7 to 10 years of manufacturing floor experience in MIG welding and fabrication, with proven success in a high-performance production environment. At least 5 years of supervisory experience in a manufacturing setting. Experience with robotic welding systems, flat panel, and tube laser equipment required. Required Skills Technical Skills: Proficient in Microsoft Office Suite (Word, Excel, Outlook) and experience with computer-integrated manufacturing systems. Strong understanding of lean manufacturing principles, 5S, and continuous improvement methodologies. Ability to analyze production data and implement data-driven solutions. Leadership Skills: Excellent communication, interpersonal, and team-building abilities. Proven capability to motivate, train, and lead diverse teams toward operational goals. Strong organizational and problem-solving skills with the ability to manage multiple priorities. Other Requirements: Demonstrated commitment to workplace safety and quality assurance. Ability to make sound decisions in a fast-paced production environment. Must exhibit integrity, professionalism, and the ability to act as a role model for others. Work Environment This position operates primarily on the manufacturing floor in a fast-paced environment with exposure to machinery, welding operations, heat, and noise. Appropriate personal protective equipment (PPE) must be worn at all times. Occasional office work is required for reporting and meetings. Equal Opportunity Statement Palmer Hamilton, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, genetic information, or any other status protected by applicable federal, state, or local law.

The Marzetti Company (Nasdaq: MZTI) manufactures and sells specialty food products. Our retail brands include Marzetti dressings and dips, New York Bakery™ garlic breads, and Sister Schubert's dinner rolls, in addition to exclusive license agreements for Olive Garden dressings, Chick-fil-A sauces and dressings, Buffalo Wild Wings sauces, Arby's sauces, Subway sauces, and Texas Roadhouse steak sauces and frozen rolls. Our foodservice business supplies sauces, dressings, breads, and pasta to many of the top restaurant chains in the United States. At Marzetti, our mission is to make every meal better through high-quality, flavorful food. Led by our purpose, to nourish growth with all that we do, our team members are dedicated to creating great tasting food and cultivating deep and lasting relationships. As a Sr Food Scientist (Grain & Dough), this role directly shapes the innovation pipeline, owning ideation through commercialization-not only to create novel bakery products, but to drive topline growth, define pipeline metrics, and deliver share/margin gains. The individual will serve as a catalyst for innovation across bakery channels and consumer segments, setting measurable growth targets (e.g. new product revenue or margin) and delivering to brand performance goals. Product & Process Development: Responsible for Grain & Dough projects in the Retail and Food Service businesses. Provide strategic leadership for the end to end innovation process, from consumer-insight-driven ideation through commercialization, with defined growth KPIs (e.g. percent of annual revenue from new launches, incremental margins, speed to market). Optimize formulations and processes for taste, texture, shelf-life, and cost effectiveness. Explore emerging ingredient technologies (e.g., enzymes, stabilizers, flavors) to enhance product performance and drive margin enhancement. Technical Leadership & Expertise: Serve as the technical resource for bakery product development. Partners with Procurement, Quality, Regulatory, and Operations to validate, commission, and optimize raw materials, formulations, and manufacturing processes. Provide technical leadership and mentorship with a growth mindset-mentoring R&D teams on innovation methods, impact-focused experimentation, and commercial success factors. Regulatory & Quality Compliance: Ensure all formulations comply with FDA, FSMA, and relevant food safety regulations. Work closely with regulatory affairs to develop accurate ingredient declarations and compliant nutrition panels. Collaborate with Quality Assurance to verify product specifications and maintain consistency through production. Commercialization & Process Optimization: Lead plant trials and support production launches. Partner with Operations and Engineering teams to seamlessly transition formulations from lab-scale to commercial production. Partner with Operations teams to optimize production processes and meet/maintain product specifications. Cross Functional Collaboration & Industry Engagement: Collaborate with internal cross functional project teams: Culinary, Brand Management/Consumer Insights, Procurement, and Sales to align product and customer strategies with business objectives. Engage with supplier and industry partners to stay ahead of emerging ingredient technologies and global food trends. Travel up to 40% associated with this role Bachelor's Degree in Food Technology/Science, Food Engineering, Bakery Science or a related field. Experience in Bakery or Grain-based applications. Experience with Stage Gate process in relation to product and process development. Strong background in experimental design, COGS, and bakery ingredient functionality Proven track record of innovation led business growth Demonstrated success in shaping or leading innovation pipelines, working with cross-functional teams to deliver growth targets Experience working with commercial / Brand / Sales functions to translate R&D efforts into measurable growth outcomes; familiar with stage-gate commercialization tied to P&L performance.

Preco is now hiring for a Full-Time Metrologist in Somerset, WI. The Metrologist is responsible for developing, optimizing, and maintaining precise measurement routines and systems that ensure product quality and conformance to specifications. This role involves creating turnkey CMM (PC-DMIS) and MicroVu measurement programs for production and inspection use, troubleshooting and improving existing routines, and collaborating with engineering. The position also supports critical quality functions such as First Article Inspections (FAIRs), capability studies, Gage R&R, and calibration activities. Preco is a leading designer and manufacturer of precision automated processing systems for high-speed and high-accuracy cutting, perforating, welding, and other specialized industrial processing applications. With our proprietary die cutting and laser-based manufacturing capabilities, Preco has also become one of the largest contract manufacturing service (CMS) providers in North America. Key Responsibilities: Create measurement routines on the CMM (PCDMIS) and MicroVu that are turnkey for production and inspectors. Troubleshoot and correct issues with current measurement routines. Lean out current measurement routines making them as efficient as possible. Eliminate waste of movement or unnecessary measurements on the CMM. Work with engineering to create robust fixturing to stage components and assemblies for measurement on the CMM and MicroVu. Perform First Article Inspections (FAIRs) on components and assemblies. Populate FAIR form along with a bubble numbered print of the current revision. Gather data for Gage R&R's, DOE's, and capability studies. Populate minitab with data for Engineering analysis. Review measurement data to ensure accuracy, consistency, and reliability. Identify and remeasure outlier data points. Author measurement procedures (MP's). Create measurement routines on the CMM for the calibration of production gages. Work with calibration to maintain measurement gages. Complete inspections for production as necessary. Provide technical support and advice to other departments or personnel. Train others on proper measuring equipment and measuring techniques. Collaborate with engineers to resolve measurement challenges. Perform any necessary equipment checks to ensure proper calibration and functionality prior to use. Maintain a clean, organized work area. Culture Development: Strong team player with excellent interpersonal skills; able to collaborate effectively and professionally with individuals across various roles and technical backgrounds. Committed to excellence and to serving others across all levels of the organization and beyond. Ability to work and be effective with minimal direct supervision. Strong analytical and problem-solving skills. Detail-oriented with a commitment to accuracy. Drive a positive and inclusive workplace culture. Adhere to all safety regulations and company policies. Job Qualifications: High School Diploma or equivalent. 5+ years of experience with CMM programming. Experience programming for complex parts. Ability to identify outliers and spot patterns in datasets. Strong computer skills, including proficiency in Microsoft Word and Excel. Preferred Qualifications 2-year Technical Degree in Quality or related field. Real-world application of PC-DMIS (Personal Computer Dimensional Measurement Interface Specification) is strongly desired. 5+ years of experience in machining, blueprint reading, and interpreting GD&T (Geometric Dimensioning and Tolerancing) is preferred Our dedicated staff keeps us at the leading edge of precision automated processing systems in our industry. When you work at Preco, you have the opportunity to apply your skills to create optimal solutions for our customers. We have a collaborative culture and a team united by a passion to provide solutions to our customers. Preco has partnered with Hueman for its recruitment needs. If you are interested in learning more about a career with Preco as a Metrologist, apply today!

A nonprofit organization located in Oak Brook is seeking an Assistant Executive Director for Finance and Administration. This role will act as the Chief Financial Officer, overseeing financial operations, budgeting, HR strategy, and compliance. The ideal candidate will have over 12 years of financial leadership experience, ideally within nonprofits, and possess a strong background in financial management and risk assessment. The position offers a competitive compensation package along with a hybrid working environment. #J-18808-Ljbffr

ABOUT THE ORGANIZATION Sun Chemical, a member of the DIC Group, is a leading producer of packaging and graphic solutions, color and display technologies, functional products, electronic materials, and products for the automotive and healthcare industries. Together with DIC, Sun Chemical is continuously working to promote and develop sustainable solutions to exceed customer expectations and better the world around us. With combined annual sales of more than $8.5 billion and 22,000+ employees worldwide, the DIC Group companies support a diverse collection of global customers. Sun Chemical Corporation is a subsidiary of Sun Chemical Group Coöperatief U.A., the Netherlands, and is headquartered in Parsippany, New Jersey, U.S.A. For more information, please visit our website at ******************* or connect with us on LinkedIn or Twitter Job Title: Ink Inplant Tech Trainee Location: Newton, NC Third Shift: 4:00pm - 12:00am Pay: Based on experience OVERVIEW: With support moving towards minimal supervision, provide color matching and small batch blending support on-site at the customer location. ESSENTIAL JOB FUNCTIONS: Produce and quality control inks to ensure inks meet or exceed the customer's specifications. Maintain detailed production and QC records. With support, identifies rework opportunities based on review of batch tickets. Maintain housekeeping and safe operations Must be able to lift up to 50 lb. buckets; and move 500 lb. drums following standard procedures. REQUIRED EDUCATION AND EXPERIENCE: High School Diploma or GED This is a customer-facing position that requires a high degree of interpersonal skill. Knowledge of MS Word/Excel. Capable of lifting 50 lbs. throughout the day Able to stand for long periods of time BENEFITS We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, medical, dental, vision, short and long term disability benefits, 401(k)+match and life insurance. Eligibility of benefit timing may vary. EQUAL EMPLOYMENT OPPORTUNITY It is Sun's policy that applicants for employment are recruited, selected, and hired on the basis of individual merit and ability with respect to the position being filled. Sun prohibits discrimination on the basis of race, color, religion, creed, national origin, age, gender, sexual orientation, gender identity, marital or veteran status, disability, or any other status protected by applicable law. Employment agencies are an important component of our talent acquisition strategy, and we value the partnerships we have built with our preferred vendors. We will not accept unsolicited resumes from employment agencies for any employment opportunity. All resumes submitted by search firms to any employee at Sun Chemical or directly to hiring managers in any form without a signed contract on file, and search engagement for that position, will be deemed unsolicited in nature, and no fee will be paid in the event the candidate is hired as a result of the referral or through other means. Additionally, any resume submitted without a contract in place will be considered property of Sun Chemical and no fees will be paid to the agency if the candidate is hired. #ID23

Key Responsibilities ● Define project scope, objectives, timelines, and deliverables. ● Gather requirements from Edge Strategy, Delivery, Operations, and cross-functional (XFN) partners. ● Manage supplier onboarding for AMER & EMEA, including NDA intake and processing. ● Validate compliance, financial, and ESG considerations before project initiation. ● Create and maintain project plans, timelines, schedules, and task assignments. ● Open and scope I-CON / CKT Jira tickets to initiate project workstreams. ● Identify dependencies and align resource needs with Delivery, Ops, and other teams. ● Lead project kickoff meetings and establish communication frameworks. ● Provide end-to-end project coordination across Edge Strategy, Delivery, Ops, Engineering, Finance, Legal, and other teams. ● Run weekly project check-ins, status meetings, and escalation reviews. ● Facilitate issue escalation, follow-ups, and cross-team resolution tracking. ● Track task completion and ensure alignment with SLAs, timelines, and quality standards. ● Maintain project dashboards, trackers, and RAID logs. ● Provide status updates and leadership reports with clear progress metrics. ● Monitor risks, blockers, issues, and scope changes, developing mitigation plans as needed. ● Ensure compliance with policies, governance requirements, and operational readiness standards. ● Maintain accurate project documentation and ensure Jira data integrity. ● Perform manual contract and pricing data entry (PVF, contract pricing) when required. ● Capture actions from monthly planning and cross-functional alignment sessions. ● Validate data completeness for downstream teams and stakeholder handoffs. ● Verify delivery completion across responsible teams. ● Finalize and close Jira tickets and associated documentation. ● Archive project materials in compliance with internal standards. ● Conduct lessons learned sessions and transition completed work to operational owners. Qualifications ● 2-5+ years of project management experience, preferably supporting technical or operations teams. ● Strong organizational, communication, and stakeholder management skills. ● Proficiency with project management tools (Jira, Monday.com, Asana, MS Project, Smartsheet). ● Understanding of risk management, change control, and cross-functional coordination. ● Experience with supplier onboarding, compliance processes, or data center/Edge workflows a plus. ● PMP, CAPM, Agile, or similar certification preferred.

The Principal Fire Protection and Wildfire Compliance Engineer is a highly specialized senior-level technical expert responsible for managing fire and life safety across the utility's infrastructure, with a specific focus on complex technical occupancies, hazardous environments, and comprehensive regulatory compliance. This role combines advanced fire protection engineering with a hands-on tactical understanding of emergency operations and a deep knowledge of specialized fire codes. The engineer will provide authoritative oversight of fire protection plan review and field inspections, integrating technical requirements into the utility's broader wildfire and property loss control strategies. Key Responsibilities Regulatory Plan Review and Enforcement Lead the fire protection plan review process for all utility facilities and construction projects, including those with special technical occupancies (e.g., generation plants, advanced control centers) and hazardous environments (e.g., fuel storage, chemical treatment facilities). Serve as the primary liaison with fire marshals, regulatory bodies, and other authorities having jurisdiction (AHJ) during plan reviews, inspections, and enforcement actions. Develop and maintain a robust system for tracking regulatory compliance, corrective actions, and documentation across all fire protection activities. Hazardous Environment and Special Occupancy Loss Control Conduct advanced risk assessments and loss control evaluations for special technical occupancies and areas with hazardous materials, identifying potential fire ignition sources, propagation risks, and mitigation measures. Specify and review the design of specialized fire suppression systems, detection systems, and fire-resistant construction for these high-risk areas, ensuring compliance with relevant NFPA standards (e.g., NFPA 30, NFPA 850) and OSHA requirements. Evaluate potential environmental impacts and associated regulatory reporting requirements related to fire and hazardous materials incidents. Utility and Wildfire Fire Operations Provide expert guidance and operational readiness evaluation, drawing on fire operations experience to inform the utility's wildfire response plans and procedures. Collaborate with internal and external fire agencies on pre-incident planning, tactical response strategies, and incident command system integration. Conduct post-incident analysis for fires impacting special occupancies or hazardous environments, using findings to drive improvements in engineering, procedures, and training. Program Evaluation and Risk Modeling Assess the effectiveness of the utility's Fire Prevention Plan (FPP) and Wildfire Mitigation Plan (WMP), particularly as they apply to hazardous environments and special occupancies. Manage and evaluate the use of wildfire risk modeling software and operational tools, incorporating specialized data related to hazardous materials and facility vulnerability. Cross-Functional and Executive Reporting Act as a technical subject matter expert for executive leadership and legal counsel, providing clear and concise report on fire protection compliance, loss control, and risk exposure. Lead cross-functional teams involving engineering, operations, safety, and environmental departments to ensure seamless integration of fire and life safety requirements. Qualifications Experience 10+ years of progressive experience in fire protection engineering, including extensive experience with regulatory plan review, field inspections, and loss control. Proven experience conducting fire and hazardous materials risk assessments in industrial or utility settings, particularly involving special technical occupancies and high-hazard environments. Demonstrated experience in fire operations, with a deep understanding of incident command, emergency response, and firefighting tactics. Expert-level knowledge of NFPA codes and standards applicable to utilities and hazardous environments (e.g., NFPA 30, 70, 850, 101). Education and Certification Bachelor's degree in Fire Protection Engineering, Electrical Engineering, or a related field. Master's degree preferred. Professional Engineer (PE) license is required. Certified Fire Protection Specialist (CFPS) is highly desirable. Skills Expert knowledge of fire science, hazardous materials behavior, electrical systems, and relevant regulatory codes (e.g., NFPA, OSHA, EPA). Advanced proficiency in plan review processes, inspection protocols, and fire investigation techniques. Exceptional written and verbal communication skills, with the ability to convey complex technical and regulatory information to diverse audiences, from field crews to executive leaders. Ability to balance technical requirements, regulatory mandates, and operational realities in a high-risk environment. Working Conditions Regular travel for inspections approximately 25% of the time. The role involves a mix of office-based work and significant fieldwork in diverse and potentially hazardous environments. The position demands flexibility and may require irregular hours during fire events, emergencies, and regulatory deadlines. #J-18808-Ljbffr

In a world of vibrant color, INX stands out by blending art, science, and sustainability into every drop of ink we make. We're globally recognized for our innovation, and we're A Great Place to Work-Certified company! INX International is the third largest producer of inks in North America with full-service subsidiaries in Europe and South America. We offer a complete line of ink and coating solutions technology for commercial, packaging and digital applications. We expertly blend pioneering technology with a deep commitment to the environment. Dedicated to coloring a safe and sustainable future one print at a time, you can see our color chemistry on beverage cans, food and household packaging, clothing, banners, billboards and more. Investing in and protecting our employees is the key to our success. Our average employee has been with us 12 years, and we recognize the significant experience and the continuous dedication of our team members. We're actively seeking new talent with new ideas as we continue to provide sustainable products, service and innovation to the printing and packaging markets. Join us in coloring a safe and sustainable future! Job Description We are seeking Mill Operator to manufacture high-quality printing ink. We will train right candidate to operate a mill machine and on TPM activities. As a Mill Operator you will be responsible for: * Running batches of ink at proper mill settings * Packaging finished product in various containers and applying labels * Cleaning and maintaining machines to TPM Standards * Learning and applying TPM knowledge to daily activities * Hockmeyer mill operation: Running and maintaining optimum OEE (overall equipment effectiveness) standards * Creating and maintaining a database of all existing formulas including processing times * Canning * Operating the following: Press out unit, pump filter equipment, and forklift * Acting as a QC liaison, providing ink samples, making ink adjustments, and recording data * Completing scheduled maintenance and utilizing troubleshooting procedures. * Helping with repacks * Hours are Monday - Friday 3 PM- 11 PM Qualifications To perform your job as expected, you will be required to: * Have a high school diploma or GED equivalent * Have 3 months of related work experience * Demonstrate good math and basic computer skills * Pay attention to detail * Be reliable to work assigned shift * Be flexible to work overtime as required * Have a strong Autonomous Maintenance (AM) background * Be able to perform an active role with any multi-disciplinary teams * Have good attendance and punctuality * Be able to lift up to 50 lbs In addition to these qualifications, we will consider it a plus if you have: * Forklift experience, but we can train you * Mixing, mill, and pump filter industry background * Previous experience in the ink industry Additional Information We offer a competitive salary with excellent benefits including medical, dental, vision, life insurance, disability, pet insurance, HSA and FSA, 401(k), and more. Through our programs, which now include Paid Volunteer Time Off and Paid Parental Leave, we support the needs of our employees, their dependents, and their communities by providing a benefit package that is easy to understand, easy to access, and affordable for all our employees. Don't just choose a job; choose a career that emphasizes employee growth in a safe, environmentally conscious culture. Embark on your Colorful Career with us! We require post-offer, pre-employment drug screens, physicals, and background checks. Equal Opportunity Employer: disability/veteran.