iSpace Environments jobs

The Opportunity: Avantor is seeking a Maintenance and Reliability Supervisor to oversee facility maintenance activities. The Maintenance Supervisor's work involves complete maintenance control over designated areas and they will report to the Reliability Maintenance Engineering Manager. This is a full-time position based out of our Carpinteria, CA office with occasional travel to support other sites as needed. What we're looking for: Education: HS diploma or equivalent degree. A degree in mechanical, instrument/electrical, or another relevant discipline (preferred). Experience: Minimum of 5 years' experience in facility maintenance. Certifications: Certification in Reliability (CRL, CMRP, etc.) desired. Additional Qualifications: Must understand the RCM process, Failure Mode Identification, Defect Analysis, Cause and Effect Analysis, Loss Elimination, use sFMEA, RCFA Decision Logic, and FRACAS. Must understand ISO 55000 Asset Management. Expertise in CMMS best practices. Full understanding of strategic maintenance planning and scheduling activities Management and leadership skills. Budget planning skills. Good communication and reporting skills. Ability to communicate/teach/coach reliability best practices, condition monitoring, and precision methods. How you will thrive and create an impact: Supervise and ensure the safety of Maintenance employees. Oversee all maintenance activities in their area of the facility. Perform routine and turnaround maintenance and plant modifications. Evaluate and analyze products, components, materials, and equipment for the purpose of understanding and predicting failures. Review product designs, material specifications, and manufacturing capability to predict reliability and dependability. Create prototypes and conduct product tests to gather reliability data. Interpret test results and recommend solutions using appropriate statistical distributions and reliability models. Recommend product design changes or alterations in manufacturing processes and controls to ensure achievement of required reliability levels. Monitor production equipment diagnostics and review maintenance record in order to predict and prevent equipment down times. Document findings, including results of root cause analysis, and facilitate the implementation of necessary changes to ensure product and/or equipment reliability levels are maintained. May determine maintenance requirements and schedules for products and equipment. Ensure maintenance resources provide an effective, efficient, and cost-effective execution of maintenance schedules across the work area. Manage the area maintenance budget. Account for the maintenance functions in their area and take necessary action to ensure that key performance targets are met. Ensure that workforce is allocated to areas of responsibility in the most effective manner. Ensure supervisory support is provided to carry out Weekly, Daily, and Shutdown Schedules. Monitor key performance indicators (KPIs) and take appropriate corrective action. Approve purchase requisitions for direct purchase of materials promptly. Monitor execution of best practices to ensure compliance and take appropriate corrective action as necessary (with Operations Management). Follow up on Root Cause Analysis (RCA) recommendations to ensure corrective actions are taken promptly (with Operations Management). Define priorities for the area (with Operations Management). Define and update the 12-Month and 8-Week Event Schedules (with Operations Management). Identify work (early) to be done during scheduled shutdown events. Identify appropriate goals and objectives for each shutdown. Other duties as assigned. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $85,000.00 - $141,600.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ****************************** and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights poster. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

We are seeking a Process Technician to support operations at a single manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure products remain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Employment Status: Hourly Full-Time Function: Manufacturing Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Header Join the manufacturing team people don't want to leave. Work where you're valued - low turnover, high satisfaction! We strive to make work fun while meeting our customers' expectations with quality and safety as top priority. We offer a competitive benefits package that includes PTO, paid holidays, 401(k) matching, HSA, medical, dental, and vision insurance as well as tuition reimbursement and loan repayment programs. We also offer a pay progression scale that allows you to grow your knowledge and your pay! We pride ourselves on the tenure of our workforce. Come see why we are the place people stay and grow! Job Responsibilities Summary of the Position This position is responsible for receiving products from outside suppliers and processing the transfer of finished goods to the distribution center. Packs transfer product as required, and puts away received items. Key Deliverables Verifies quantity of received items Entering packing slips information into internal system and SAP Puts all received product into the correct rack and bin locations Correcting received quantity errors Transfer finished good to distribution center Key Accountability Metrics Receiving errors Accurately following all PCP plan Timely entry of all finished and received goods Area organized using 6S principles Key Responsibilities/Essential Functions Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears personal protection equipment as required by safety regulations. Receives products from outside suppliers Receives product from outside suppliers. Verifies count per packing slip Scans receipts into internal system Posts receipts to correct purchase orders in SAP system Works with various departments to resolve receipt problems Puts received product into correct rack/bin locations Notifies managers and employees of products received Processes transfer of product to distribution center Ensure all quantities and part numbers match work orders to be transferred Scans and sends transfer items to the warehouse - moves all items in SAP Packs all transferred items in the correct shipping containers per product specifications Supports Department and Company Initiatives Works on cost savings projects and Six Sigma projects and provides support for other team members and projects. Attends team meetings. Utilizes lean tools: 6S, visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Job Requirements Core Competencies required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Language Skills Good written, oral and interpersonal skills. Ability to read, analyze and interpret written documents. Must speak English and be articulate with phone and computer communications. Mathematical Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to present numbers in graphs and charts. Reasoning Ability The ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. The ability to deal with problems involving a few concrete variables in standardized situations. Other Qualities Demonstrates accuracy, thoroughness, and attention to detail. Ability to perform independently without direct supervision. Demonstrates initiative to resolve issues or improve processes. Good teamwork skills. Able to deal with frequent change, delays, or unexpected events. Basic computer skills to include Microsoft Office products, particularly Word and Excel, as well as SAP. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Employment Status: Salary Full-Time Function: Engineering Pay Range: ($74,603.39 - $106,576.28) Target Bonus: 8.0% Req ID: 27551 Summary Lincoln Electric Automation is seeking a Mechanical Design Engineer for our Chattanooga, TN location. As a Mechanical Design Engineer, you will focus on conceptualizing and detailing innovative automation systems including robotic work cells, tooling, and precision positioning equipment. Using advanced 3D CAD platforms (ProE/Creo, SolidWorks - preferred), you'll take ownership of mechanical design from concept through build, testing, and service support. This position involves heavy mechanical engineering design work to create custom tooling and fixtures. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do Lead the mechanical design of custom automation systems, often managing one (1) complex project at a time. Develop and document 3D mechanical designs using CAD software such as SolidWorks. Perform engineering calculations (static and dynamic systems) to ensure mechanical performance and safety. Collaborate with cross-functional teams-including fabrication, machine build, controls, and project management-throughout the project lifecycle. Provide technical drawings, mechanical layouts, and detailed part documentation to support production and procurement. Interact with customers regularly during design and development to ensure alignment with technical requirements and expectations. Ensure that mechanical designs meet all project specifications, quotations, and purchase order terms. Take ownership of small-scale projects as Engineering Lead, Designer, and Detailer. Support Estimating, Sales, Production, and Service departments with technical insight and collaborative problem-solving. Proactively manage timelines and to meet project schedules in a fast-paced environment (typical duration: 4-8 weeks). Required Experience & Skills 2+ years of mechanical design engineering experience Industrial automation or custom equipment development industry experience preferred. Associate or Bachelor's degree in Mechanical Engineering, Mechanical Design, or related field preferred but not required. Proficiency with 3D CAD software (ProE/Creo and/or SolidWorks required). Solid understanding of mechanical principles, fabrication methods, and materials. Basic knowledge of electrical, pneumatic, and robotic system integration is a plus. Strong mechanical aptitude with a hands-on approach to problem-solving. Experience in customer-facing technical roles and project collaboration is desirable. Proficiency in Microsoft Office tools (Word, Excel); experience with project management software is a plus. Ability to adapt to shifting priorities, solve complex design challenges, and deliver results under tight timelines. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Req ID: 27857 Pay Range: $23.41 / hr - $38.46 / hr Bonus: 5% Summary Lincoln Electric Automation is seeking a Controls Design Engineer to design, develop, and implement electrical and automation systems for integrated tooling and advanced manufacturing equipment. This role focuses on control system architecture, hardware specification, PLC/HMI programming, and ensuring compliance with industry safety and quality standards. This is an on-site position located in our Chattanooga, TN plant. In addition to competitive pay, Lincoln Electric offers bonus compensation, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Develop electrical control system architectures, including schematics, wiring diagrams, and panel layouts. Specify, select, and integrate automation components such as PLCs, HMIs, servo drives, VFDs, sensors, actuators, and safety devices. Program PLCs, HMIs, and other control devices to implement control algorithms and logic Collaborate with mechanical, robotics, and fabrication teams to ensure system designs align with project objectives and customer specifications. Perform system testing and troubleshooting to ensure proper functionality. Produce technical documentation per standards and ISO 9001 processes, including design packages, test plans, and revision records. Maintain working knowledge of emerging automation technologies and relevant safety standards. Required Education & Experience Bachelor's degree in Electrical Engineering, Controls Engineering, or related field; equivalent experience considered. 3+ years of experience designing industrial control systems or automated machinery. Proficiency with AutoCAD Electrical or EPLAN for schematic and panel design. Solid understanding of AC/DC power distribution, motor control, motion systems, pneumatics, and industrial networking protocols. Experience with robotics integration, welding automation (arc, laser, resistance), or machine tooling systems preferred. Strong troubleshooting, analytical, and system-level problem-solving skills. Ability to manage multiple projects and adapt to changing priorities in a dynamic engineering environment. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Purpose This role is responsible for the Operational Technology Infrastructure (OTI) at Roseburg plant sites. The successful candidate will collaborate and innovate with customers and virtual team members to develop and implement network, server and client systems in support of the plant's manufacturing efforts. The reliability and performance of that infrastructure directly impacts the success of the mill. The OTI Support Technician will provide front line infrastructure support. The role is an on-site position that focuses to support end users, manage all OT related infrastructure at the mills, and provide effective OT systems to maintain manufacturing production targets for the facility. Key Responsibilities Follow all health and safety policies and programs Maintain and troubleshoot site operations technology infrastructure, including servers, networking equipment, PLCs, HMIs, and other control system components Provide technical support of site operations technology infrastructure Implement improvements in systems capabilities that will increase the ability to meet customer requirements, including safe and reliable operations, and improve business competitiveness As a member of a virtual team that spans all Roseburg locations in the US and Canada, work closely with the operations technology group on adherence to standards and participate in training as required Develop and maintain documentation, and provide training for plant personnel on the manufacturing network system and components Work with corporate IT staff and plant staff to support capital improvement projects as assigned Perform other duties as assigned Models company core values Required Qualifications Five (5) years of experience in administration of Windows workstations and servers Associate's degree in Computer Science, Information Technology, Electrical or Mechanical Engineering or equivalent combination of education and/or experience Demonstrated safety focus Network skills: Route, Switch, Firewall/Security, Wireless, Circuit Management, VPN, general infrastructure, etc. (Cisco/Meraki) Facilitation and problem-solving skills and the ability to learn new technologies in a fast-paced environment Must be able to be on call for 24/7 manufacturing operations, including nights, weekends and holidays as required Preferred Qualifications Bachelor's degree (or higher) in Computer Science, Information Technology, Electrical or Mechanical Engineering OR equivalent combination of education and/or experience Experience interfacing with or supporting infrastructure needs of a process-control environment Experience with VMWare vSphere and VMWare Horizon and Wonderware Controls software PLC Programming Experience/Allen Bradley About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Start Your Civilian Career with a Global Leader in Dairy Manufacturing Lemoore, CA Fort Morgan, CO Allendale, MI Leprino is offering transitioning service members the opportunity to gain hands-on experience in industrial maintenance through our DoD SkillBridge Maintenance Technician Trainee Program. This 4-6 month program provides immersive, on-the-job training in one of the world's leading dairy foods manufacturing companies, setting you up for a seamless transition into a high-demand civilian career. At Leprino, we pride ourselves on innovation, teamwork, and a strong commitment to excellence. As the largest producer of mozzarella cheese and a global leader in dairy ingredients, we understand the value of highly skilled technical professionals. This program is designed to bridge your military expertise into a thriving career in industrial maintenance. What You'll Learn & Do As a Maintenance Technician Trainee, you'll be working alongside seasoned maintenance professionals, gaining real-world experience in maintaining and troubleshooting advanced manufacturing equipment. Key Responsibilities: Perform preventive maintenance on conveyors, motors, pumps, valves, and hydraulic systems. Conduct vibration analysis and thermal imaging to predict equipment failures. Work with lubrication systems to maintain production equipment. Diagnose and repair mechanical, hydraulic, pneumatic, and electrical systems. Troubleshoot three-phase motors, motor controls, and Variable Frequency Drives (VFDs). Work with steam boilers, refrigeration systems, and ammonia-based cooling systems. Gain hands-on experience with Programmable Logic Controllers (PLCs) and Human-Machine Interfaces (HMIs). Assist in diagnosing automation system issues using SCADA and industrial networking. Perform welding and fabrication for minor equipment repairs and modifications. Enter maintenance data and track equipment history in SAP or another CMMS software. Support installation, setup, and commissioning of new processing and packaging equipment. Work on projects involving robotic automation and advanced processing technology. Participate in Lean Manufacturing and Continuous Improvement (CI) initiatives to enhance equipment efficiency. Follow OSHA safety standards, Lockout/Tagout (LOTO) procedures, and food safety (GMP, HACCP) protocols. Learn arc flash safety and work in high-voltage environments safely and effectively. This is a structured training program with direct mentorship, on-the-job learning, and exposure to industry-leading maintenance practices that will set you up for long-term career success. Who We're Looking For Military service members eligible for the DoD SkillBridge Program (within 180 days of separation). Experience in the following military maintenance roles: Army: 15-series MOS (Aviation Maintenance Technicians). Navy: Engineman (EN), Machinist's Mate (MM), Electrician's Mate (EM), Hull Maintenance Technician (HT), Gas Turbine Systems Technician (GS), Machinery Repairman (MR). Marines: 60/61/62 (Aircraft Maintenance). Air Force: Aircraft Maintenance (2A5X1, 2A3X3), HVAC/R (3E1X1). Coast Guard: Machinery Technician (MK), Electronics Technician (ET), Aviation Maintenance Technician (AMT), Electrician's Mate (EM) Apply Today! Take the first step toward a rewarding civilian career. If you're a transitioning service member looking for a hands-on, high-paying career in industrial maintenance, we encourage you to apply! 📩 Contact: Iassen Donov - *********************** 🌐 Visit: *************** to learn more.

Sales Operations Specialist About the Role: We're looking for a Sales Support Specialist to assist our account managers and sales team in delivering exceptional service and meeting performance targets. This role requires strong organizational skills, attention to detail, and the ability to thrive in a fast-paced environment. Key Responsibilities: Assist account manager/sales team to meet the performance target to provide an efficient and comprehensive service Support account manager/sales team in handling of inquiries, orders, issues, shipment, tracking, reports, and general follow up Works cross functionally with manufacturing and management teams and resolving issues timely as required Proactively interface with customers and serve as a point of main contact as request Coordinate sales related activities and maintain/monitor accurate data with efficiency Prepare sales operation reports and presentation materials as request Support sales administrative related functions Exercise creative thinking and apply experiences to improve processes as needed Qualifications & Skills Bachelor's degree in Business, Operations, or a related field (preferred). Proficient in Microsoft Office (Excel, PowerPoint) and SAP. Background in B2B and distribution business models; experience in tech industries is a plus. 2-5 years in Sales Operations, Business Operations, or Account Support roles. Previous experience supporting sales management preferred. Ability to work effectively under pressure and meet challenging targets. Strong sense of accountability, ownership, and a positive attitude. Excellent problem-solving skills with attention to detail for coordinating and following up on requests. Proven ability to manage multiple tasks with shifting priorities and tight deadlines in a fast-paced environment. Strong written and verbal communication skills to engage with customers and internal stakeholders. Team player with flexibility and the ability to self-manage. Preferred: Operational experience in distribution business.

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide. Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain. Project Analyst Ensure sales and business operations related projects and workflows run smoothly under region office. Conduct data analysis and created reports to monitor project progress, identify bottlenecks, and recommend corrective actions for the region Organize and facilitate regular project meetings with clear agendas, outcomes, and action items. Develop and maintain detailed project schedules, track deliverables, and manage dependencies and risks. Work closely with business managers to define scope, objectives, KPIs, and success criteria for each project. Facilitate timely communication and alignment with all stakeholders, including leadership and cross-functional teams. Support change management efforts and rollout of new systems, policies, and operational improvements. Maintain project documentation and contribute to process standardization and knowledge-sharing. Qualifications Bachelor's degree in Business, Operations, or a related field. Master's degree or PMP certification is a plus. 5+ years of experience in business operations or project management roles. Strong understanding of operational workflows, resource planning, and cross-functional collaboration. Proficient in project management tools or systems Strong analytical skills and experience with Excel, dashboards, or data visualization tools Excellent written and verbal communication skills; able to interface with all levels of the organization. Detail-oriented, proactive, and able to manage multiple projects under tight timelines. Experience working in a matrixed, global, or fast-growth organization.

Sanitary Stainless Welding Inc. (SSWI) in Fresno, CA is part of DCI, Inc., a 100% employee-owned engineered to order stainless-steel storage and processing vessels, agitators, and fully integrated skidded systems for the food, dairy and beverage industry. For 70 years, we've built our reputation on delivering quality that ensures the integrity of our customers' products. The Plant Manager is responsible for all manufacturing, scheduling, quality, material handling, shipping/receiving, and workforce leadership for the Fresno, CA production facility. The leader ensures operational excellence and accountability across safety, quality, delivery, and cost, while maturing plant capabilities to support future ASME and skid fabrication requirements. This role is expected to implement non-negotiable operating standards, stabilize production performance, and build a strong culture of ownership in alignment with DCI's ESOP values. Position Responsibilities: Operational Leadership & Performance: Own plant-level results for on-time delivery, first-pass quality, labor efficiency, cost performance, forecasting, inventory turns, and safety metrics. Establish and enforce standard work, 5S discipline, material staging requirements, and labor reporting accuracy. Personally lead Daily Tier 1 & Tier 2 operations meetings during the first 90 days before delegating as systems mature. Capability Growth: Lead capability roadmap to Strengthen 3-A and wine tank production, develop ASME pressure vessel capacity, progress toward vessel + piping assemblies and future skid fabrication and prepare staffing, layout, material flow, training, and inspection readiness to support this transition. Continuous Improvement: Lead Lean/CI initiatives: waste elimination, throughput improvements, space optimization, takt-time visibility. Install visual performance management boards and tiered accountability reviews. ERP (Epicor) & Production Information Integrity: Ensure transactional accuracy for labor, inventory, routing, BOM, and WIP movements. Utilize ERP data to drive forecasting, capacity planning, and material availability. People Leadership & Culture: Directly lead teams in welding, fabrication, fit-up, material handling, shipping/receiving, planning, and local quality. Coach and develop team capability, addressing performance gaps through structured feedback and improvement plans. Position Requirements: 5+ years plant management or multi-cell manufacturing operations leadership. Proven record achieving delivery, quality, cost, and labor efficiency improvements. Experience with fabrication/welding/heavy industrial or sanitary stainless-steel manufacturing. Demonstrated success driving non-negotiable operational standards, standard work, and 5S. ERP experience required (Epicor strongly preferred). Effective change leadership and communication skills. Exposure to ASME pressure vessels, food & beverage, sanitary fabrication, or process equipment (highly preferred). Lean/CI certification (Green Belt or equivalent, preferred). Experience in an ESOP or highly collaborative ownership culture (preferred). SSWI is committed to a culture that promotes long-term career satisfaction and provides an opportunity for personal and professional growth. Competitive compensation Profit distribution to employees via ESOP A benefits package designed to support our employees' health, well-being, and financial security Work/life programs designed to provide a safe, secure, and balanced environment Education and training programs to develop and grow a high-performance workforce

Extron is a leading developer and manufacturer of professional AV hardware and software solutions which serve the ever-changing needs of organizations around the world as they strive to better communicate. Each Extron product is carefully engineered to provide best-in-class performance, intuitive operation, and exceptional reliability. At Extron, the passion for our products is evidenced by our company culture, which encourages innovation and provides opportunities for individual career growth. Our teams develop and release over 100 new products a year and continue to grow our vast patent portfolio. Job Overview: The Production Control Coordinator works closely with manufacturing, planning, and stockroom personnel to support the on-time delivery of assemblies and finished goods. Responsibilities include but are not limited to: Monitor, track, and move material as required through the production processes to ensure timely delivery through material routing steps to ensure schedules are meet. Assist with the prioritization of Work Orders to support production and/or sales schedules using digital tools including MRP systems and Excel. Coordinate with planning and manufacturing to ensure timely availability of materials to production locations. Address material shortage, backlogs, or other potential schedule interruptions such as bottlenecks or delays that may impact production schedule. Support production and inventory personnel with inventory reconciliation, returns and purge activities. Interface with Production Control and Production Management directly over daily routine shipping activities. Follow up with critical deliveries from material receiving thru production to shipping as needed. Perform other duties as assigned. Required Education and Experience: Minimum of 3 years of experience in an electronics manufacturing environment. Experience with MRP/ERP systems. Knowledge of Microsoft Office with emphasis on Excel. Effective communication skills both verbal as well as written. Strong organizational skills and attention to detail. Pay Range: $21.00 to $23.00 per hour. Pay may vary depending on experience, qualifications, and other job-related factors.

Bishop-Wisecarver is looking for a Global Supply Chain Manager to lead our global sourcing, procurement, logistics, and warehouse operations. In this strategic role, you'll shape the long-term supply chain roadmap for a diverse industrial automation portfolio and ensure materials are delivered reliably, cost-effectively, and in full compliance. You'll lead a talented team, strengthen supplier partnerships, and drive operational excellence across the end-to-end supply chain. Note: This is mainly an onsite role in the San Francisco Bay Area. To learn more about BW, please visit us at: ******************** What You'll Lead Global sourcing strategy across metals, machined parts, electromechanical components, and electronic devices Supplier negotiations, contracting, KPIs, and long-term performance management Procurement, materials planning, MRP execution, and S&OP alignment Logistics, freight optimization, 3PL partnerships, and customs compliance Warehouse operations, inventory accuracy programs, and OSHA-aligned safety ERP/data governance, digital tool improvements, dashboards, automation, and supply chain analytics Cross-functional initiatives in cost optimization, business continuity, and continuous improvement What You Bring 7+ years of progressive global supply chain or sourcing leadership Experience managing multi-disciplinary teams (buyers, planners, warehouse) Strong knowledge of metals sourcing, machining, and electromechanical/automation supply chains International supplier negotiation experience Familiarity with ITAR/EAR, RoHS/REACH, CoO, conflict minerals Strong ERP/MRP skills and data-driven decision making Preferred: APICS CSCP/CPIM, CI/Lean background, regulated industry experience, warehouse or digital transformation experience. Why Join Us You'll influence strategy, build systems that scale, and create a resilient supply chain that fuels innovation and customer success. If you're a hands-on, forward-thinking supply chain leader ready to make a big impact-we'd love to meet you.

Field Service Management (FSM) Analyst Must Have Skills Has 3+ years as Systems Analyst focused on FSM Has utility industry experience Can gather requirements, design processes, and test systems Can support integrations (APIs, middleware, data migration) Understands mobile field service applications

About the Company: Innospec Performance Chemicals is looking to add an Electrical, Instrumentation & Controls Technician to the team in Salisbury, NC. About the Role: The Electrical, Instrumentation & Controls Technician installs, maintains and repairs electrical instrumentation and controls as listed below and maintain cable, heat and exhaust systems in water and wastewater treatment plant as well as manufacturing facilities. Responsibilities: Read, understand and interpret schematics, ladder drawings, technical specifications and manufacture's manuals related to repair, maintenance and troubleshooting of electrical instrumentation and control equipment. Install, maintain, repair and troubleshoot electrical systems including, but not limited to: generators, PLC's, electric motors, motor controls, flow equipment, alarm and telemetry systems, heating and exhaust systems, conduits, cable and relays. Perform preventative maintenance in accordance with established procedures. Provide technical guidance to operations and maintenance personnel and provide suggestions to improve service and operations. Provide electrical expertise including technical review for in-house modifications, additions and major repairs. Contact and work with independent contractors regarding electrical instrumentation and control system repairs and installations. Coordinate with Warehouse staff to maintain an inventory of electrical parts and equipment sufficient to perform repairs and complete normal installations. Assist in repairs of water and sewer leaks. Must be available to work overtime, holidays, weekends, and on-call rotation. Other duties may be assigned. Qualifications: This position requires knowledge of installation, maintenance, testing and repair of electrical instrumentation and control equipment and related systems; skill in the techniques of handling tools and equipment used in the electrical trade; and knowledge of safety standards and practices applicable to the repair and maintenance of electrical instrumentation and control equipment and related systems, and to provide corrective measure for resolution of problems. The ability to develop work procedures that will provide minimum interference with plant operations. The ability to read, interpret and review engineering plans and specifications and to make simple sketches of electrical parts or systems. Required Skills: High School Diploma or equivalent. 5+ years of related experience or equivalent education in electrical instrumentation and control system maintenance, installation, and repair. Must have pertinent certifications and/or licenses related to job duties. Employee is encouraged to continue education through seminars, attend classes, etc. in order to improve knowledge of job-related skills. Job Type: Full-time Pay range and compensation package: Starting at $32 per hour (can increase based on experience)

Distribution Center Manager (Day Shift) Salary: $100,000-$120,000 + Annual Performance Bonus Schedule: Monday-Friday | Day Shift, Ontario, CA Lead. Optimize. Deliver Results. We are seeking an experienced Distribution Center (DC) Manager to lead all warehouse operations at a high-volume, revenue-generating facility. This is a hands-on leadership role you'll spend most of your day on the floor coaching teams, driving performance, and ensuring safe, efficient operations. If you thrive in a fast-paced distribution environment and enjoy leading from the front, this is an opportunity to make a measurable impact while growing with a stable, well-established organization. What You'll Do Lead and oversee all inbound and outbound warehouse operations, including receiving, storage, picking, and shipping Manage daily shipping priorities, labor assignments, and equipment needs to meet service-level expectations Ensure accuracy, quality, and condition of all outbound shipments Coach, develop, evaluate, and discipline hourly associates (5+ direct reports) Drive operational efficiency, safety compliance, and standardized procedures Monitor material handling equipment and coordinate repairs as needed Maintain a clean, organized, and safety-compliant facility Partner with leadership to support distribution goals and continuous improvement initiatives What We're Looking For 7+ years of warehouse experience with proven leadership responsibility Strong experience managing small parcel operations in a high-volume environment Hands-on leader comfortable working on the floor with associates Proficiency with WMS systems, RF scanners, and AS400 Strong communication, organizational, and multitasking skills Forklift certification and OSHA knowledge Required Proficiency in Microsoft Office (Excel a plus) Facility Snapshot Processes ~2,000 orders per month Ships ~20,000 units / 105,000 lbs monthly Generates $10M+ annually in revenue 65,000 sq. ft. facility (60% racked) Non-union environment Current staffing: 3 FTEs + 3 temp employees Monday-Friday (7:30am-4:00pm) Why Join Us? Competitive salary ($100K-$120K) plus annual performance bonus Annual merit increases based on performance Full benefits after 30 days: Medical, Dental, Vision, PTO, 401(k) Stable schedule with long-term growth opportunity A leadership role where your decisions truly matter Ready to lead a high-performing distribution center? Apply today, send your resume to ************************* Or call Daisy at ************

Teledyne Relays' mission, vision, and value statements have never really changed in principle since 1964. Dedication to every employee and client's success; Innovation that matters - for our company and for the world; Trust and personal responsibility in all relationships - Teledyne Relays is EveryWhereYouLook! Are you looking to be part of a dynamic and growing organization - whose company culture is centered on empowering its employees to make decisions? As one of the leading manufacturers in ultra-miniature hermetically sealed switching solutions, Teledyne Relays is focused on hiring the best available talent! Position Summary Environmental, Health & Safety (EHS) and Facilities Management professional with 7+ years of experience in manufacturing environments. Skilled in compliance programs, hazardous waste management, Cal-OSHA IIPP, regulatory reporting, facilities operations, and safety training. Core Competencies Environmental Management Systems (EMS/HSMS) Cal-OSHA Injury and Illness Prevention Program (IIPP) Hazardous Waste Management & Tiered Permitting Regulatory Reporting (EPA, CalEPA, DTSC, SCAQMD, Cal OSHA, LACSD, CDPH-RHB, LARWQCB, LACFD) Incident Investigation & Root Cause Analysis Ergonomic Assessments & Safety Training Wastewater & Stormwater Compliance SDS Management & Hazardous Materials Control Facilities & Utilities Management (HVAC, Clean Rooms, Cryogenics) Preventive Maintenance Planning Responsibilities Provide direction and technical support to department staff responsible for EMS/HSMS compliance Develop and implement EMS/HSMS programs ensuring compliance with regulations Organize and update Cal-OSHA IIPP for proactive safety measures, including regular review of the following H&S programs: Work area inspection & ergonomic assessments Job Hazard Analysis Machine Guarding Lock out / Tag out Conduct audits of hazardous waste, stormwater, wastewater, and air emissions programs Manage 22+ EHS permits/licenses, renewals, postings, and compliance documentation Submit regulatory reports to CalEPA, DTSC, SCAQMD, OSHA, and other agencies Coordinate incident investigations, root cause analysis, and corrective actions Direct safety training and verify competency through testing Maintain hazardous waste records, manifests, contingency plans, and SDS library Support wastewater treatment system and environmental operating procedures Direct Facilities, Maintenance and Production programs for HVAC, clean rooms, lighting, compressed air systems, cryogenics, construction, plumbing, building interior & exterior and grounds Manage preventive maintenance logs for production equipment, minimizing downtime Qualifications Minimum seven (7) years related experience in Environmental, Health & Safety management Bachelor of Science in Environmental Engineering or Industrial Engineering Must be a US person Skilled in mathematics and chemistry, with computer proficiency in MS Office (Word, Excel, Power Point, etc.). Ability to partner with and effectively communicates to Teledyne Relays management and supervisory staff Process driven with excellent interpersonal communication skills required. Experience in manufacturing environment preferred Familiarity with ANSI Z136.1-2014 American National Standard for Safe Use of Lasers Must be a US Person

iSpace is a global services company focused on outsourcing, consulting and staffing. Over the last decade, we have helped numerous corporations and institutions reach their business objectives and IT goals. iSpace services are centered in three areas - IT Outsourcing, IT Staff Augmentation, and Business Process Outsourcing. Our team of seasoned professionals based in the United States and India focus on providing results, driving innovation and affecting outcomes. Our clients have come to rely on our expertise, our commitment to quality, customer service and our innovative approach to problem solving to help create sustainable value for their customers and shareholders. Specializing in Healthcare, Entertainment, Automobile and Financial Services, we work with Fortune 1000 companies throughout the United States. Our commitment to customer satisfaction is reflected in the fact that over 90% of our client base have remained with us for over 5 years. Job Description Position: Senior Full-Stack Developer Location: Fully remote Duration: 12+ months Description: Seeking a Full Stack Developer that can architect and develop large scale enterprise applications using React.js for front-end, Node.js for API's & Postgres for backend. Along with Kubernetes experience, and experience working with offshore development team. Focus: Must have strong JavaScript, Node.js, Postgres experience. Infrastructure is on Amazon - so, must have experience with Amazon Lambda, Amazon Cognito (Identity Management System). Responsible for writing APIs in largescale applications. Strong JavaScript, Node.js. Strong with PostgresSQL, Good SQL Knowledge - client is using MySQL - must have good understanding of Data Models. The Custom APIs (Rest APIs) were written internally - backbone for Web Application & Mobile Application Top Skills: Node.js & JavaScript PostgresSQL Amazon exp - APIs are hosted on Amazon Infrastructure Open AI/Chat GPT 3.5/4 Responsibilities : Understand proposed features and quickly design and build scalable API's and SQL schema & queries Develop reusable user interface components and front-end libraries in React.js Proactively analyze website performance and implement solutions for improvement Collaborate with architects, developers, business analysts, and QA analysts to design, develop, and test applications Requirements: 10+ years of experience building complex web applications Solid work experience using component-based development on the client side 7+ years of experience developing single page applications 7+ years of experience coding robust and secure Rest API's in Node.js, JSON, XML 7+ years of experience working with PostgresSQL (preferred) MySQL (or SQL Server) designing schemas and writing optimized queries 7+ years of experience coding in JavaScript, HTML, CSS 3+ years of experience developing in React.js and Redux. Prior to that some experience in Angular or Backbone or Knockout or Ember. 5+ years of experience integrating systems using Rest APIs and single sign-on 7+ years of experience with automated unit, integration and end-to-end testing Experience with continuous integration / continuous deployment using AWS CodePipeline and CloudFormation templates Experience with AWS infrastructure (API Gateway, S3, Lambda, Aurora, EC2) Experience with Google Analytics integration Deep knowledge to create standards-compliant, cross-browser, mobile compatible front-end code with responsive design Deep knowledge of server-side and front-end performance optimization Strong design skills a huge plus Should be a self-starter who is excited to relentlessly solve many technical challenges Must have excellent written and verbal communication skills Should manage own time and work well both independently and as part of a team Must have strong JavaScript, Node.js, PostgreSQL experience Infrastructure is on Amazon - so, must have experience with Amazon Lambda, Amazon Cognito (Identity Management System) Responsible for writing APIs in largescale applications Strong JavaScript, Node.js Good SQL Knowledge - client is using MySQL - must have good understanding of Data Models The Custom APIs (Rest APIs) were written internally - backbone for Web Application & Mobile Application Additional Information All your information will be kept confidential according to EEO guidelines.