Apprentice jobs at JLL - 278 jobs

Job TitleMechatronics & Robotics Apprentice SummaryJob Description Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: Weekly Pay Comprehensive Benefits that start on your first day Training, Development, and Advancement Opportunities A Clean and Cutting-Edge Facility A Safety-First Culture About the Role The Mechatronics & Robotics Apprentice (MRA) will learn to install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control systems and components in a complex fulfillment/distribution center through the completion of a comprehensive classroom, laboratory, and on-the-job learning program. The apprentice will also train in and adhere to all health and safety policies and procedures. Upon completion of the program, the MRA will be promoted to Mechatronics & Robotics Technician (MRT). Participants must be able to attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Ogeechee Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Travel-related expenses, including room and board, during the training will be provided. Key Responsibilities: Safety: Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in On-the-Job Learning (OJL). Observe and incorporate safety standards and regulations required for safe operation of the system. Maintenance: Combine electronic, mechanical, computer, and control skills to perform scheduled, predictive, and preventive maintenance to detect and prevent problems. Install, repair, adjust, and test equipment and components to ensure that systems function properly. Work with electronic and physical technical documentation to maintain all material handling equipment (MHE) at the site. Monitoring: Analyzes technical specifications of mechatronic systems, subsystems, modules and components. Support: Learn PLCs and work with Automation Engineers in a laboratory environment. Communication: Communicate and work well within a team environment both in school and in OJL. Basic Qualifications: High school or equivalent diploma. Must be at least 18 years of age Must meet the minimum qualifying score on a Mechanical Aptitude Test Able enroll in and attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Able to complete one year of On-the-Job Learning (OJL) at your home site as a Mechatronics & Robotics Apprentice (MRA) after the successful completion of the 12-week training program. Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. Ability to work flexible schedules/shifts/areas. Preferred Qualifications: Experience in an electrical, mechanical, or controls field. Physical Demands: Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. Regularly required to crouch or bend and reach to install/move equipment. Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. Work in a warehouse environment with fluctuating temperatures. Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? Apply today and be part of a team that is making a difference! Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $17.00 - $20.00 C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: “C&W Services”

Job TitleMechatronics & Robotics Apprentice SummaryJob Description Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: Weekly Pay Comprehensive Benefits that start on your first day Training, Development, and Advancement Opportunities A Clean and Cutting-Edge Facility A Safety-First Culture About the Role The Mechatronics & Robotics Apprentice (MRA) will learn to install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control systems and components in a complex fulfillment/distribution center through the completion of a comprehensive classroom, laboratory, and on-the-job learning program. The apprentice will also train in and adhere to all health and safety policies and procedures. Upon completion of the program, the MRA will be promoted to Mechatronics & Robotics Technician (MRT). Participants must be able to attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Ogeechee Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Travel-related expenses, including room and board, during the training will be provided. Key Responsibilities: Safety: Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in On-the-Job Learning (OJL). Observe and incorporate safety standards and regulations required for safe operation of the system. Maintenance: Combine electronic, mechanical, computer, and control skills to perform scheduled, predictive, and preventive maintenance to detect and prevent problems. Install, repair, adjust, and test equipment and components to ensure that systems function properly. Work with electronic and physical technical documentation to maintain all material handling equipment (MHE) at the site. Monitoring: Analyzes technical specifications of mechatronic systems, subsystems, modules and components. Support: Learn PLCs and work with Automation Engineers in a laboratory environment. Communication: Communicate and work well within a team environment both in school and in OJL. Basic Qualifications: High school or equivalent diploma. Must be at least 18 years of age Must meet the minimum qualifying score on a Mechanical Aptitude Test Able enroll in and attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Able to complete one year of On-the-Job Learning (OJL) at your home site as a Mechatronics & Robotics Apprentice (MRA) after the successful completion of the 12-week training program. Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. Ability to work flexible schedules/shifts/areas. Preferred Qualifications: Experience in an electrical, mechanical, or controls field. Physical Demands: Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. Regularly required to crouch or bend and reach to install/move equipment. Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. Work in a warehouse environment with fluctuating temperatures. Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? today and be part of a team that is making a difference! Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $17.00 - $20.00 C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: “C&W Services”

Job TitleMechatronics & Robotics Apprentice SummaryJob Description Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: Weekly Pay Comprehensive Benefits that start on your first day Training, Development, and Advancement Opportunities A Clean and Cutting-Edge Facility A Safety-First Culture About the Role The Mechatronics & Robotics Apprentice (MRA) will learn to install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control systems and components in a complex fulfillment/distribution center through the completion of a comprehensive classroom, laboratory, and on-the-job learning program. The apprentice will also train in and adhere to all health and safety policies and procedures. Upon completion of the program, the MRA will be promoted to Mechatronics & Robotics Technician (MRT). Participants must be able to attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Ogeechee Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Travel-related expenses, including room and board, during the training will be provided. Key Responsibilities: Safety: Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in On-the-Job Learning (OJL). Observe and incorporate safety standards and regulations required for safe operation of the system. Maintenance: Combine electronic, mechanical, computer, and control skills to perform scheduled, predictive, and preventive maintenance to detect and prevent problems. Install, repair, adjust, and test equipment and components to ensure that systems function properly. Work with electronic and physical technical documentation to maintain all material handling equipment (MHE) at the site. Monitoring: Analyzes technical specifications of mechatronic systems, subsystems, modules and components. Support: Learn PLCs and work with Automation Engineers in a laboratory environment. Communication: Communicate and work well within a team environment both in school and in OJL. Basic Qualifications: High school or equivalent diploma. Must be at least 18 years of age Must meet the minimum qualifying score on a Mechanical Aptitude Test Able enroll in and attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Able to complete one year of On-the-Job Learning (OJL) at your home site as a Mechatronics & Robotics Apprentice (MRA) after the successful completion of the 12-week training program. Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. Ability to work flexible schedules/shifts/areas. Preferred Qualifications: Experience in an electrical, mechanical, or controls field. Physical Demands: Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. Regularly required to crouch or bend and reach to install/move equipment. Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. Work in a warehouse environment with fluctuating temperatures. Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? Apply today and be part of a team that is making a difference! Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $17.00 - $20.00 C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: “C&W Services”

Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: * Weekly Pay * Comprehensive Benefits that start on your first day * Training, Development, and Advancement Opportunities * A Clean and Cutting-Edge Facility * A Safety-First Culture About the Role The Mechatronics & Robotics Apprentice (MRA) will learn to install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control systems and components in a complex fulfillment/distribution center through the completion of a comprehensive classroom, laboratory, and on-the-job learning program. The apprentice will also train in and adhere to all health and safety policies and procedures. Upon completion of the program, the MRA will be promoted to Mechatronics & Robotics Technician (MRT). Participants must be able to attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Ogeechee Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Travel-related expenses, including room and board, during the training will be provided. Key Responsibilities: * Safety: Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in On-the-Job Learning (OJL). Observe and incorporate safety standards and regulations required for safe operation of the system. * Maintenance: Combine electronic, mechanical, computer, and control skills to perform scheduled, predictive, and preventive maintenance to detect and prevent problems. Install, repair, adjust, and test equipment and components to ensure that systems function properly. Work with electronic and physical technical documentation to maintain all material handling equipment (MHE) at the site. * Monitoring: Analyzes technical specifications of mechatronic systems, subsystems, modules and components. * Support: Learn PLCs and work with Automation Engineers in a laboratory environment. * Communication: Communicate and work well within a team environment both in school and in OJL. Basic Qualifications: * High school or equivalent diploma. * Must be at least 18 years of age * Must meet the minimum qualifying score on a Mechanical Aptitude Test * Able enroll in and attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). * Able to complete one year of On-the-Job Learning (OJL) at your home site as a Mechatronics & Robotics Apprentice (MRA) after the successful completion of the 12-week training program. * Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. * Ability to work flexible schedules/shifts/areas. Preferred Qualifications: * Experience in an electrical, mechanical, or controls field. Physical Demands: * Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. * Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. * Regularly required to crouch or bend and reach to install/move equipment. * Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. * Work in a warehouse environment with fluctuating temperatures. * Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? Apply today and be part of a team that is making a difference! Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $17.00 - $20.00 C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: "C&W Services"

Job TitleMechatronics & Robotics Apprentice SummaryJob Description Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: Weekly Pay Comprehensive Benefits that start on your first day Training, Development, and Advancement Opportunities A Clean and Cutting-Edge Facility A Safety-First Culture About the Role The Mechatronics & Robotics Apprentice (MRA) will learn to install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control systems and components in a complex fulfillment/distribution center through the completion of a comprehensive classroom, laboratory, and on-the-job learning program. The apprentice will also train in and adhere to all health and safety policies and procedures. Upon completion of the program, the MRA will be promoted to Mechatronics & Robotics Technician (MRT). Participants must be able to attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Ogeechee Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Travel-related expenses, including room and board, during the training will be provided. Key Responsibilities: Safety: Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in On-the-Job Learning (OJL). Observe and incorporate safety standards and regulations required for safe operation of the system. Maintenance: Combine electronic, mechanical, computer, and control skills to perform scheduled, predictive, and preventive maintenance to detect and prevent problems. Install, repair, adjust, and test equipment and components to ensure that systems function properly. Work with electronic and physical technical documentation to maintain all material handling equipment (MHE) at the site. Monitoring: Analyzes technical specifications of mechatronic systems, subsystems, modules and components. Support: Learn PLCs and work with Automation Engineers in a laboratory environment. Communication: Communicate and work well within a team environment both in school and in OJL. Basic Qualifications: High school or equivalent diploma. Must be at least 18 years of age Must meet the minimum qualifying score on a Mechanical Aptitude Test Able enroll in and attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Able to complete one year of On-the-Job Learning (OJL) at your home site as a Mechatronics & Robotics Apprentice (MRA) after the successful completion of the 12-week training program. Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. Ability to work flexible schedules/shifts/areas. Preferred Qualifications: Experience in an electrical, mechanical, or controls field. Physical Demands: Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. Regularly required to crouch or bend and reach to install/move equipment. Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. Work in a warehouse environment with fluctuating temperatures. Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? Apply today and be part of a team that is making a difference! Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $17.00 - $20.00 C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: “C&W Services”

Job TitleMechatronics & Robotics Apprentice SummaryJob Description Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: Weekly Pay Comprehensive Benefits that start on your first day Training, Development, and Advancement Opportunities A Clean and Cutting-Edge Facility A Safety-First Culture About the Role The Mechatronics & Robotics Apprentice (MRA) will learn to install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control systems and components in a complex fulfillment/distribution center through the completion of a comprehensive classroom, laboratory, and on-the-job learning program. The apprentice will also train in and adhere to all health and safety policies and procedures. Upon completion of the program, the MRA will be promoted to Mechatronics & Robotics Technician (MRT). Participants must be able to attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Ogeechee Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Travel-related expenses, including room and board, during the training will be provided. Key Responsibilities: Safety: Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in On-the-Job Learning (OJL). Observe and incorporate safety standards and regulations required for safe operation of the system. Maintenance: Combine electronic, mechanical, computer, and control skills to perform scheduled, predictive, and preventive maintenance to detect and prevent problems. Install, repair, adjust, and test equipment and components to ensure that systems function properly. Work with electronic and physical technical documentation to maintain all material handling equipment (MHE) at the site. Monitoring: Analyzes technical specifications of mechatronic systems, subsystems, modules and components. Support: Learn PLCs and work with Automation Engineers in a laboratory environment. Communication: Communicate and work well within a team environment both in school and in OJL. Basic Qualifications: High school or equivalent diploma. Must be at least 18 years of age Must meet the minimum qualifying score on a Mechanical Aptitude Test Able enroll in and attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Able to complete one year of On-the-Job Learning (OJL) at your home site as a Mechatronics & Robotics Apprentice (MRA) after the successful completion of the 12-week training program. Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. Ability to work flexible schedules/shifts/areas. Preferred Qualifications: Experience in an electrical, mechanical, or controls field. Physical Demands: Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. Regularly required to crouch or bend and reach to install/move equipment. Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. Work in a warehouse environment with fluctuating temperatures. Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? Apply today and be part of a team that is making a difference! Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $17.00 - $20.00 C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: “C&W Services”

Job TitleMechatronics & Robotics Apprentice SummaryJob Description Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: Weekly Pay Comprehensive Benefits that start on your first day Training, Development, and Advancement Opportunities A Clean and Cutting-Edge Facility A Safety-First Culture About the Role The Mechatronics & Robotics Apprentice (MRA) will learn to install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control systems and components in a complex fulfillment/distribution center through the completion of a comprehensive classroom, laboratory, and on-the-job learning program. The apprentice will also train in and adhere to all health and safety policies and procedures. Upon completion of the program, the MRA will be promoted to Mechatronics & Robotics Technician (MRT). Participants must be able to attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Ogeechee Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Travel-related expenses, including room and board, during the training will be provided. Key Responsibilities: Safety: Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in On-the-Job Learning (OJL). Observe and incorporate safety standards and regulations required for safe operation of the system. Maintenance: Combine electronic, mechanical, computer, and control skills to perform scheduled, predictive, and preventive maintenance to detect and prevent problems. Install, repair, adjust, and test equipment and components to ensure that systems function properly. Work with electronic and physical technical documentation to maintain all material handling equipment (MHE) at the site. Monitoring: Analyzes technical specifications of mechatronic systems, subsystems, modules and components. Support: Learn PLCs and work with Automation Engineers in a laboratory environment. Communication: Communicate and work well within a team environment both in school and in OJL. Basic Qualifications: High school or equivalent diploma. Must be at least 18 years of age Must meet the minimum qualifying score on a Mechanical Aptitude Test Able enroll in and attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Able to complete one year of On-the-Job Learning (OJL) at your home site as a Mechatronics & Robotics Apprentice (MRA) after the successful completion of the 12-week training program. Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. Ability to work flexible schedules/shifts/areas. Preferred Qualifications: Experience in an electrical, mechanical, or controls field. Physical Demands: Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. Regularly required to crouch or bend and reach to install/move equipment. Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. Work in a warehouse environment with fluctuating temperatures. Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? Apply today and be part of a team that is making a difference! Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $17.00 - $20.00 C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: “C&W Services”

Job TitleMechatronics & Robotics Apprentice SummaryJob Description Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: Weekly Pay Comprehensive Benefits that start on your first day Training, Development, and Advancement Opportunities A Clean and Cutting-Edge Facility A Safety-First Culture About the Role The Mechatronics & Robotics Apprentice (MRA) will learn to install, alter, troubleshoot, repair, and maintain electronic, mechanical, computer, control systems and components in a complex fulfillment/distribution center through the completion of a comprehensive classroom, laboratory, and on-the-job learning program. The apprentice will also train in and adhere to all health and safety policies and procedures. Upon completion of the program, the MRA will be promoted to Mechatronics & Robotics Technician (MRT). Participants must be able to attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Ogeechee Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Travel-related expenses, including room and board, during the training will be provided. Key Responsibilities: Safety: Follow work processes closely at school and on the shop floor to ensure a safe environment while job shadowing with technical advisor in On-the-Job Learning (OJL). Observe and incorporate safety standards and regulations required for safe operation of the system. Maintenance: Combine electronic, mechanical, computer, and control skills to perform scheduled, predictive, and preventive maintenance to detect and prevent problems. Install, repair, adjust, and test equipment and components to ensure that systems function properly. Work with electronic and physical technical documentation to maintain all material handling equipment (MHE) at the site. Monitoring: Analyzes technical specifications of mechatronic systems, subsystems, modules and components. Support: Learn PLCs and work with Automation Engineers in a laboratory environment. Communication: Communicate and work well within a team environment both in school and in OJL. Basic Qualifications: High school or equivalent diploma. Must be at least 18 years of age Must meet the minimum qualifying score on a Mechanical Aptitude Test Able enroll in and attend a 12-week training at one of four colleges: Vincennes University (Vincennes, IN), Lehigh Carbon Community College (Allentown, PA), Technical College (Statesboro, GA), or Dallas College - Eastfield Campus (Dallas, TX). Able to complete one year of On-the-Job Learning (OJL) at your home site as a Mechatronics & Robotics Apprentice (MRA) after the successful completion of the 12-week training program. Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. Ability to work flexible schedules/shifts/areas. Preferred Qualifications: Experience in an electrical, mechanical, or controls field. Physical Demands: Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. Regularly required to crouch or bend and reach to install/move equipment. Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. Work in a warehouse environment with fluctuating temperatures. Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? Apply today and be part of a team that is making a difference! Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $17.00 - $20.00 C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: “C&W Services”

The Apprentice Sound Editor is a person who performs tasks related to the functions of the Editorial Department, primarily for the purpose of learning the skills to transition to other bargaining unit positions, generally under the supervision of an Assistant Supervising Sound Editor, Assistant Sound Editor, Sound Editor, Picture Editor or Supervising Sound Editor. Job Posting Segment: Skywalker Sound Job Posting Primary Business: Skywalker Sound-Editing Primary Job Posting Category: Production Employment Type: Full time Primary City, State, Region, Postal Code: Nicasio, CA, USA Alternate City, State, Region, Postal Code: Date Posted: 2025-11-25

UNASSIGNED APPRENTICE LINEMAN-1 (UAL-1) for Distribution Organization - Metro Atlanta Georgia Power's line crews play an integral part in Georgia's economy. Hospitals, government agencies, schools, businesses, and individuals will be relying on line crews to provide reliable electric service. If you're looking for a career in which you can make a difference and serve Georgians, consider becoming an Apprentice Lineman for Georgia Power! Our Unassigned Apprentice Lineman (UAL-1) positions are typically located throughout the state of Georgia. Your ability to work anywhere in the state could be a factor in any hiring decisions. Flexibility in desired work locations is essential for progression through the Lineman Development Program. All candidates must be available to work within a certain distance of their assigned operating headquarters (upon hire). No relocation assistance is available. Summary of Position Duties The UAL-1 will be assisting with the construction of overhead and underground power distribution systems. You will learn construction and maintenance activities associated with our Distribution systems, as well as operating procedures for all equipment involved in the process, including diggers, derricks, cranes, aerial devices, and pulling and tensioning equipment. The ability to work at heights and feel comfortable doing so is critical to work in a bucket truck or manually climbing using spikes and a climbing belt. One of the most important things you will learn during this period is how to safely climb poles. Training: The Unassigned Apprentice Lineman (UAL-1) position was developed as a part of the Lineman Development Program (LDP). The LDP is an extensive training program combining skills training, classroom training, and on-the-job training. Successful completion of 4-5 year LDP program is required in order to become a Journeyman Lineman with Georgia Power. Education and Experience High School diploma or equivalent is strongly preferred. Candidates who have earned the ELAC (Electrical Lineworker Apprentice Certification) through one of the Technical Colleges of Georgia are strongly desired. Candidates must have a basic mechanical and electrical aptitude or background. Minimum of 1 year of work experience in construction, heavy industrial maintenance, utility, military and/or electrical experience is preferred. Experience working outdoors, with heavy equipment/machinery, heavy load rigging/lifting, emergency responders, commercial truck driving, tree trimming, and/or farming is a plus. Candidates who have military experience are strongly desired. Knowledge, Skills and Abilities Basic mechanical aptitude and knowledge of hand tools. Proven ability to read, understand, and follow procedures, rules, and regulations. Demonstrated strong customer service skills. Candidate must currently be able to climb and work regularly and comfortably at a minimum of 30 feet and up to 75 feet off the ground for Distribution positions. Climbing experience is a plus. Ability to take instruction, direction and translate into actions. Able to perform physically demanding activities while working outside in all conditions. Demonstrated ability to successfully work in a team environment. Display ethical behaviors and demonstrate "Our Company Values" which are: Safety Excellence, Unquestionable Trust, Superior Performance & Total Commitment. Exhibited safe work practices as evidenced by a history of working accident free and injury free. This position has been identified as a role that will require the use of a Georgia Power fleet vehicle. The following will be required if you are selected for this position: Must have at least one year of verifiable driving experience (Must hold a valid driver's license for the class vehicle to be operated. Driving permits are not typically considered a valid driver's license). Must have no revocation of driving privileges within the 36 months prior to application, no convictions of major traffic violations (DUI, hit and run, reckless driving, etc.) within the 12 months prior to application, or any pending charges for a major traffic violation at the time of application. Must consent to a continuous monitoring of your Motor Vehicle Record Other Requirements Valid driver's license is required All candidates who are invited for an interview will be required to provide one of the following: Valid CDL (Commercial Driver's License) - Class A OR Valid CDL Learners Permit OR Be able to obtain a CDL permit before they Start. If candidate is military - obtain a Georgia CDL Permit Waiver If candidate currently possess a CDL Permit, candidate must be able to attain a CDL - Class A within 6 months of hire date. Any candidate who holds a current CDL License will require full verification with current & past employers. CDL Practice Test Link *********************************************** ***************************************************************** Candidates must pass a pre-employment written exam (CAST Test). The CAST test includes Graphic Arithmetic, Mathematical usage, Mechanical Concepts and Reading Comprehension. In addition, candidates must pass a Post Offer Employment Test (POET)... If they are offered a job. Practice CAST Test Prior to being eligible for an interview, successful candidates must take and pass the Construction and Skilled Trade (CAST) Test: *********************************************** User Name: southern Password: testing Because of the nature of our work and weight restrictions on our equipment a candidate must CURRENTLY weigh (and maintain their body weight) AT or BELOW 270 pounds -fully dressed including steel-toed work boots and hardhat. Due to the physical demands of this position, candidates must be able to lift and drag equipment weighing 50-pounds or more. Candidates must be able to frequently work in extreme weather conditions throughout the entire year. All climatic conditions will be experienced in these positions (heat, cold, rain, snow/ice, etc). Candidates must be available for "call out" duties which will require being available and accessible in times of Storm emergencies at least 50% of the times requested, including overnight and out of state travel. This could also include working evenings, nights, weekends and holidays. A thorough background check and DOT drug screen (including nicotine) will be conducted prior to employment (after a job offer is extended). In addition, you must successfully meet requirements for a Pre-Employment (DOT) physical exam approved by our company physician. Additional Information Pay: This is a position covered by a collective bargaining agreement between GPC and IBEW Local 84. Union membership is optional. Current starting pay for ALL NEW HIRES is $4357 /month or approximately $25.13/hour. UAL-1 candidates who receive job offers will be hired at this rate, regardless of experience/skills. This rate is non-negotiable. Georgia Power Company has classified this position as "Safety Sensitive" and as such is subject to relevant pre-employment screening(s) to determine fitness for duty. Any offer of employment is contingent upon the applicant successfully completing all required fitness assessments. All candidates must apply online while this posting is active (including submitting resume information) and answer a series of job-related questions in order to be considered. Georgia Power is an investor-owned, tax-paying utility that serves 2.25 million customers in all but four of Georgia's 159 counties. The largest of four electric utilities that make up Southern Company, Georgia Power, has been providing electricity to Georgia for more than a century at rates well below the national average. Southern Company (NYSE: SO) is America's premier energy company, with 44,000 megawatts of generating capacity and 1,500 billion cubic feet of combined natural gas consumption and throughput volume serving 9 million electric and gas utility customers through its subsidiaries. The company provides clean, safe, reliable and affordable energy through electric utilities in four states, natural gas distribution utilities in seven states, a competitive generation company serving wholesale customers across America and a national recognized provider of customized energy solutions, as well as fiber optics and wireless communications. Southern Company brands are known for excellent customer service, high reliability and affordable prices that are below the national average. Through an industry-leading commitment to innovation, Southern Company and its subsidiaries are inventing America's energy future by developing the full portfolio of energy resources, including carbon-free nuclear, 21st century coal, natural gas, renewables and energy efficiency, and creating new products and services for the benefit of customers. Southern Company has been named by the U.S. Department of Defense and G.I. Jobs magazine as a top military employer, recognized among the Top 50 Companies for Diversity by DiversityInc, listed by Black Enterprise magazine as one of the 40 Best Companies for Diversity and designated a Top Employer for Hispanics by Hispanic Network. The company has earned a National Award of Nuclear Science and History from the National Atomic Museum Foundation for its leadership and commitment to nuclear development and is continually ranked among the top utilities in Fortune's annual World's Most Admired Electric and Gas Utility rankings. Visit our website at ************************ Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law.

About Us Brink Constructors, Inc. is an electrical contractor with over 75 years of experience in high-voltage transmission line and substation erection. With a long and industrious history, our experienced team continues to help power the nation now and into the future. At Brink, our success stems from the skilled personnel that we employ and the philosophy we instill to follow and uphold our core fundamental ideals including Safety First. Becoming a member of the Brink team is more than "just a job" or satisfactory employment-at Brink, we build careers, and we invest in the future of our people. Bring your skills to light and power your future with our team. About this Role Brink Constructors, Inc. Work will consist of installations, alterations, additions and/or repairs of electrical systems, and associated materials and equipment within the high voltage transmission and substation electrical industry. Perform duties necessary to complete assigned task under the direct supervision of Project Supervisor. Employee should keep all materials, tools and equipment in an orderly fashion and maintain a clean work area at all times. Demonstrating safe work habits and proper care for tools and equipment. Position requires 100% travel anywhere throughout the MidWest Pay: This is a non-exempt hourly role. The pay range is $27.69 -$46.86 / hour What You'll Do * Assist with the construction, framing, and installation of transmission structures, hardware, and components. * Climb wood and steel structures using proper climbing techniques and fall‑protection equipment. * Operate hand tools, power tools, and basic equipment used in line construction. * Install and maintain conductors, insulators, guy wires, and grounding systems. * Support stringing, sagging, and tensioning operations under supervision. * Perform basic troubleshooting and assist with repairs on energized and de‑energized lines (within apprentice‑level restrictions). * Read and interpret construction drawings, staking sheets, and work orders. * Maintain a clean and organized job site, ensuring tools and materials are properly handled. * Follow all company safety rules, OSHA regulations, and industry best practices. * Participate in ongoing training, skills assessments, and apprenticeship program requirements. What You'll Bring Required: * High School Diploma or GED * 1-3 years of experience in transmission or distribution line work * Valid class A CDL * Line School Certificate or Transcripts preferred Pre-screen: Upon offer, employees will be required to complete and pass a pre-employment drug screen, background, and/or MVR check. What You'll Get Benefits * 401(k) with company match (traditional & roth available) * Paid Holidays and PTO * Parental Leave * Medical, Dental, Vision * Additional Voluntary benefits available * Employee Discounts * Company paid: * Health Plan (HDHP 5,000 -other plan options available for cost) * Long Term Disability * 1X Base Salary life Insurance * Employee Assistance Program Brink Constructors, Inc. does not sponsor applicants for work visas. All applicants must be legally authorized to work in the United States. Brink Constructors, Inc. participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Brink Constructors, Inc. will only use E-Verify once you have accepted a job offer and completed the Form I-9. Brink Constructors, Inc. is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all applicants and employees regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, disability, status as a covered veteran, or other military status. Applications for this position will be accepted on an ongoing basis. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

UNASSIGNED APPRENTICE LINEMAN-1 (UAL-1) for Distribution Organization - Metro Atlanta Georgia Power's line crews play an integral part in Georgia's economy. Hospitals, government agencies, schools, businesses, and individuals will be relying on line crews to provide reliable electric service. If you're looking for a career in which you can make a difference and serve Georgians, consider becoming an Apprentice Lineman for Georgia Power! Our Unassigned Apprentice Lineman (UAL-1) positions are typically located throughout the state of Georgia. Your ability to work anywhere in the state could be a factor in any hiring decisions. Flexibility in desired work locations is essential for progression through the Lineman Development Program. All candidates must be available to work within a certain distance of their assigned operating headquarters (upon hire). No relocation assistance is available. Summary of Position Duties The UAL-1 will be assisting with the construction of overhead and underground power distribution systems. You will learn construction and maintenance activities associated with our Distribution systems, as well as operating procedures for all equipment involved in the process, including diggers, derricks, cranes, aerial devices, and pulling and tensioning equipment. The ability to work at heights and feel comfortable doing so is critical to work in a bucket truck or manually climbing using spikes and a climbing belt. One of the most important things you will learn during this period is how to safely climb poles. Training: The Unassigned Apprentice Lineman (UAL-1) position was developed as a part of the Lineman Development Program (LDP). The LDP is an extensive training program combining skills training, classroom training, and on-the-job training. Successful completion of 4-5 year LDP program is required in order to become a Journeyman Lineman with Georgia Power. Education and Experience + High School diploma or equivalent is strongly preferred. + Candidates who have earned the ELAC (Electrical Lineworker Apprentice Certification) through one of the Technical Colleges of Georgia are strongly desired. + Candidates must have a basic mechanical and electrical aptitude or background. + Minimum of 1 year of work experience in construction, heavy industrial maintenance, utility, military and/or electrical experience is preferred. + Experience working outdoors, with heavy equipment/machinery, heavy load rigging/lifting, emergency responders, commercial truck driving, tree trimming, and/or farming is a plus. + Candidates who have military experience are strongly desired. Knowledge, Skills and Abilities + Basic mechanical aptitude and knowledge of hand tools. + Proven ability to read, understand, and follow procedures, rules, and regulations. + Demonstrated strong customer service skills. + Candidate must currently be able to climb and work regularly and comfortably at a minimum of 30 feet and up to 75 feet off the ground for Distribution positions. Climbing experience is a plus. + Ability to take instruction, direction and translate into actions. + Able to perform physically demanding activities while working outside in all conditions. + Demonstrated ability to successfully work in a team environment. + Display ethical behaviors and demonstrate "Our Company Values" which are: Safety Excellence, Unquestionable Trust, Superior Performance & Total Commitment. + Exhibited safe work practices as evidenced by a history of working accident free and injury free. This position has been identified as a role that will require the use of a Georgia Power fleet vehicle. The following will be required if you are selected for this position: + Must have at least one year of verifiable driving experience (Must hold a valid driver's license for the class vehicle to be operated. Driving permits are not typically considered a valid driver's license). + Must have no revocation of driving privileges within the 36 months prior to application, no convictions of major traffic violations (DUI, hit and run, reckless driving, etc.) within the 12 months prior to application, or any pending charges for a major traffic violation at the time of application. + Must consent to a continuous monitoring of your Motor Vehicle Record Other Requirements + Valid driver's license is required + All candidates who are invited for an interview will be required to provide one of the following: + Valid CDL (Commercial Driver's License) - Class A OR + Valid CDL Learners Permit OR Be able to obtain a CDL permit before they Start. + If candidate is military - obtain a Georgia CDL Permit Waiver + If candidate currently possess a CDL Permit, candidate must be able to attain a CDL - Class A within 6 months of hire date. + Any candidate who holds a current CDL License will require full verification with current & past employers. CDL Practice Test Link *********************************************** ***************************************************************** + Candidates must pass a pre-employment written exam (CAST Test). The CAST test includes Graphic Arithmetic, Mathematical usage, Mechanical Concepts and Reading Comprehension. In addition, candidates must pass a Post Offer Employment Test (POET)... If they are offered a job. Practice CAST Test Prior to being eligible for an interview, successful candidates must take and pass the Construction and Skilled Trade (CAST) Test: *********************************************** User Name: southern Password: testing + Because of the nature of our work and weight restrictions on our equipment a candidate must CURRENTLY weigh (and maintain their body weight) AT or BELOW 270 pounds -fully dressed including steel-toed work boots and hardhat. + Due to the physical demands of this position, candidates must be able to lift and drag equipment weighing 50-pounds or more. + Candidates must be able to frequently work in extreme weather conditions throughout the entire year. All climatic conditions will be experienced in these positions (heat, cold, rain, snow/ice, etc). + Candidates must be available for "call out" duties which will require being available and accessible in times of Storm emergencies at least 50% of the times requested, including overnight and out of state travel. This could also include working evenings, nights, weekends and holidays. + A thorough background check and DOT drug screen (including nicotine) will be conducted prior to employment (after a job offer is extended). In addition, you must successfully meet requirements for a Pre-Employment (DOT) physical exam approved by our company physician. Additional Information Pay: This is a position covered by a collective bargaining agreement between GPC and IBEW Local 84. Union membership is optional. Current starting pay for ALL NEW HIRES is $4357 /month or approximately $25.13/hour. UAL-1 candidates who receive job offers will be hired at this rate, regardless of experience/skills. This rate is non-negotiable. Georgia Power Company has classified this position as "Safety Sensitive" and as such is subject to relevant pre-employment screening(s) to determine fitness for duty. Any offer of employment is contingent upon the applicant successfully completing all required fitness assessments. All candidates must apply online while this posting is active (including submitting resume information) and answer a series of job-related questions in order to be considered. Georgia Power is an investor-owned, tax-paying utility that serves 2.25 million customers in all but four of Georgia's 159 counties. The largest of four electric utilities that make up Southern Company, Georgia Power, has been providing electricity to Georgia for more than a century at rates well below the national average. Southern Company (NYSE: SO) is America's premier energy company, with 44,000 megawatts of generating capacity and 1,500 billion cubic feet of combined natural gas consumption and throughput volume serving 9 million electric and gas utility customers through its subsidiaries. The company provides clean, safe, reliable and affordable energy through electric utilities in four states, natural gas distribution utilities in seven states, a competitive generation company serving wholesale customers across America and a national recognized provider of customized energy solutions, as well as fiber optics and wireless communications. Southern Company brands are known for excellent customer service, high reliability and affordable prices that are below the national average. Through an industry-leading commitment to innovation, Southern Company and its subsidiaries are inventing America's energy future by developing the full portfolio of energy resources, including carbon-free nuclear, 21st century coal, natural gas, renewables and energy efficiency, and creating new products and services for the benefit of customers. Southern Company has been named by the U.S. Department of Defense and G.I. Jobs magazine as a top military employer, recognized among the Top 50 Companies for Diversity by DiversityInc, listed by Black Enterprise magazine as one of the 40 Best Companies for Diversity and designated a Top Employer for Hispanics by Hispanic Network. The company has earned a National Award of Nuclear Science and History from the National Atomic Museum Foundation for its leadership and commitment to nuclear development and is continually ranked among the top utilities in Fortune's annual _World's Most Admired Electric and Gas Utility_ rankings. Visit our website at *********************** . Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Georgia Power is the largest electric subsidiary of Southern Company (NYSE: SO), America's premier energy company. Value, Reliability, Customer Service and Stewardship are the cornerstones of the Company's promise to 2.6 million customers in all but four of Georgia's 159 counties. Committed to delivering clean, safe, reliable, and affordable energy at rates below the national average, Georgia Power maintains a diverse, innovative generation mix that includes nuclear, coal and natural gas, as well as renewables such as solar, hydroelectric and wind. Georgia Power focuses on delivering world-class service to its customers every day and the Company is recognized by J.D. Power and Associates as an industry leader in customer satisfaction. For more information, visit ******************* and connect with the Company on Facebook (Facebook.com/GeorgiaPower), Twitter (Twitter.com/GeorgiaPower) and Instagram (Instagram.com/ga_power). Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 16645 Job Category: Power Line Operations & Maintenance Job Schedule: Full time Company: Georgia Power

About Us Brink Constructors, Inc. is an electrical contractor with over 75 years of experience in high-voltage transmission line and substation erection. With a long and industrious history, our experienced team continues to help power the nation now and into the future. At Brink, our success stems from the skilled personnel that we employ and the philosophy we instill to follow and uphold our core fundamental ideals including Safety First. Becoming a member of the Brink team is more than "just a job" or satisfactory employment-at Brink, we build careers, and we invest in the future of our people. Bring your skills to light and power your future with our team. About this Role This job requires a DOT physical and a current DOT medical card. Brink Constructors, Inc. Work will consist of installations, alterations, additions and/or repairs of electrical systems, and associated materials and equipment within the high voltage transmission and substation electrical industry. Perform duties necessary to complete assigned task under the direct supervision of Project Supervisor. Employee should keep all materials, tools and equipment in an orderly fashion and maintain a clean work area at all times. Demonstrating safe work habits and proper care for tools and equipment. This job requires 100% travel. We have job sites in WY, CO, ND, and NE. This is a pipeline requistion, your application will be considered for future openings. What You'll Do * Clearly understand and comply with Brink Constructors and Federal Job Safety Requirements. (O.S.H.A.)• Must be able to report to assigned job site location on time as directed.• Maintain and properly store tools and equipment.• Proper use and safe handling of tools, equipment and materials.• Accurately organize materials and tools in order to maintain clean and neat work area.• Assist in various job duties as directed.• Properly install assigned work on wood and steel structures.• Ability to quickly learn functions of the jobs.• Ability to install switchgear and its terminations.• Ability to install all sizes of conduit that will ensure timely installations.• Ability to learn equipment operations (crane, flatbed truck, trailer, forklift, aerial lift)• Ability to use hand tools. (i.e., pliers, hammer, crescent wrench, side cutters, channel locks, screwdriver).• Must be able to safely use all power tools, saws, threaders, wire tuggers, hydraulic benders and KO punches.• Work from all types of aerial lifts and operate lifts as necessary in a safe manner.• Perform work at various heights upwards to 120 feet from various means (aerial lift or climbing).• Accurately read labels, job site maps/directions, instruction manuals and written instructions.• Employee must have ability to acquire / maintain personal hand tools and other tools necessary for this position (line-worker belt, hooks, scare strap, tool pouch, nut bag and line-worker high top boots) as directed.• Valid Driver's License and have own transportation. (Note Public Transportation does not always serve most sites). Commercial Driver's License (CDL) required.• Other miscellaneous duties, as assigned, to assist with the completion of a task. What You'll Bring * Lineman course graduate or equivalent * High School graduate or G.E.D. required * Current active driver's license * Class A CDL required Pre-screen: Upon offer, employees will be required to complete and pass a pre-employment drug screen, background, and/or MVR check. What You'll Get Benefits * 401(k) with company match (traditional & roth available) * Paid Holidays and PTO * Parental Leave * Medical, Dental, Vision * Additional Voluntary benefits available * Employee Discounts * Company paid: * Health Plan (HDHP 5,000 -other plan options available for cost) * Long Term Disability * 1X Base Salary life Insurance * Employee Assistance Program Brink Constructors, Inc. does not sponsor applicants for work visas. All applicants must be legally authorized to work in the United States. Brink Constructors, Inc. participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Brink Constructors, Inc. will only use E-Verify once you have accepted a job offer and completed the Form I-9. Brink Constructors, Inc. is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all applicants and employees regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, disability, status as a covered veteran, or other military status. Applications for this position will be accepted on an ongoing basis. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Your Work Shapes Our World** When you join Caterpillar, you're joining a global team who cares not just about the work we do - _but also about each other_ . We are the makers, problem solvers and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Join us. **Want to build YOUR career?! LOOK at Caterpillar! We are looking for candidates just like you that want to build more than machines. This is a terrific opportunity to join the Caterpillar North Little Rock AR team as a Welder Apprentice our 2nd shift team earning day ONE benefits and a starting wage of $21.10/hour + Shift Differential** Caterpillar - North Little Rock utilizes a variety of welding processes within the facility. We have 15 robotic welding cells and over 30 different weld stations to complete daily builds. As a fabricator the main welding process is 0.052" GMAW (MIG) in the 1G/2G & 1F/2F positions. In addition, GTAW (TIG) and Stud Welding are utilized in some weld stations. **Candidates must pass the following Welder Qualification Tests at the completion of a Caterpillar provided 6-Week Weld School and 3 Weeks OJT:** + 0.052" GMAW - 2F - 8mm - Single Pass + 0.052" GMAW - 2F - 10mm - MULTI-PASS + 0.052" GMAW - 2G - 12.7mm - MULTI-PASS + 0.052" GMAW - 3F - 5mm + GTAW 3F-4F Toe dress **Pay Rate and Schedule:** + Position includes a wage of $21.10/hour + Shift Differential on 2nd Shift.and a **comprehensive benefit program** + Openings available on **_2nd shift: Monday - Friday, 3 p.m - 11 p.m._** Overtime opportunities may be available on a voluntary basis based on business needs and with leader prior authorization **Basic Qualifications:** + Basic Knowledge of Welding Fundamentals + Available to work from **_7:00AM to 3:00PM_** during the **_introductory training_** period (6-Weeks in Weld School & 3-Weeks OJT) **Top Candidates Will Also Have:** + Welding experience and/or successful completion of a Technical or Trade School Welding Course + Ability to Work Safely & Wear Required Personal Protective Equipment + Experience utilizing GMAW, GTAW & Carbon Arc Gouging processes + Ability to Complete an 8mm - 2F, 10mm - 2F & 25mm - 2G Weld Qualification Test utilizing 0.052" GMAW weld process + Ability to Follow Standard Work Instructions + Ability to Read Blueprints + Ability to Work Overtime to Support Production Demands **Physical Requirements** + Ability to sit, kneel, squat, or stand for prolonged periods + Ability to climb, work from and descend ladders/platforms/steps + Ability to perform repetitive operations + Ability to lift to 35 lbs. **Perks and Extra Details:** + Overtime is available, based on business need. + You'll have the opportunity for pay increases annually based on performance. + **Day One Benefits!** We offer a total rewards package that provides medical, dental, vision, RX, and 401K for all employees. + Additional benefits include paid vacation days, holidays, personal time off (PTO) and a paid volunteer day (prorated based upon hire date). + Potential to advance your career into operations leadership and other advanced manufacturing jobs. + Safety is a top priority. We provide all personal protective equipment: + Welding Hoods, Jackets & Gloves, + Metatarsal guard steel-toe boots, + Safety glasses & hearing protection + Bump Caps **What you will get:** Our goal at Caterpillar is for _YOU_ to have a rewarding career. Here you earn more than just an hourly wage because we value your performance, we offer a total rewards package that provides Day ONE benefits (medical, dental, vision, RX, and 401K), weekly pay. Additional benefits include paid holidays and paid time off (prorated based upon hire date). **Final details** Resumes **_are required_** . Please do not submit a blank application (no work history or resume attached) as this may lead to disqualification. Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in ( _Be sure to keep your username and password when you initially apply_ ) on our career website as it will reflect any updates to your status. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O **About Caterpillar** Caterpillar Inc. is the world's leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, we've been helping customers build a better, more sustainable world and are committed to and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed. here (*************************************************************************** . **Summary Pay Range:** $21.10 - $26.50 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees **Posting Dates:** January 22, 2026 - March 5, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Your Work Shapes Our World** When you join Caterpillar, you're joining a global team who cares not just about the work we do - _but also about each other_ . We are the makers, problem solvers and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Join us. **Want to build YOUR career?! LOOK at Caterpillar! We are looking for candidates just like you that want to build more than machines. This is a terrific opportunity to join the Caterpillar North Little Rock AR team as a Welder Apprentice, our 1st shift team earning day ONE benefits and a starting wage of $21.10/hour** Caterpillar - North Little Rock utilizes a variety of welding processes within the facility. We have 15 robotic welding cells and over 30 different weld stations to complete daily builds. As a fabricator the main welding process is 0.052" GMAW (MIG) in the 1G/2G & 1F/2F positions. In addition, GTAW (TIG) and Stud Welding are utilized in some weld stations. **Candidates must pass the following Welder Qualification Tests at the completion of a Caterpillar provided 6-Week Weld School and 3 Weeks OJT:** + 0.052" GMAW - 2F - 8mm - Single Pass + 0.052" GMAW - 2F - 10mm - MULTI-PASS + 0.052" GMAW - 2G - 12.7mm - MULTI-PASS + 0.052" GMAW - 3F - 5mm + GTAW 3F-4F Toe dress **Pay Rate and Schedule:** + Position includes a wage of $21.10/hour and a **comprehensive benefit program** + Openings available on **_1st shift: Monday - Friday, 7 a.m. - 3 p.m_** . Overtime opportunities may be available on a voluntary basis based on business needs and with leader prior authorization **Basic Qualifications:** + Basic Knowledge of Welding Fundamentals + Available to work from **_7:00AM to 3:00PM_** during the introductory training period (6-Weeks in Weld School & 3-Weeks OJT) **Top Candidates Will Also Have:** + Welding experience and/or successful completion of a Technical or Trade School Welding Course + Ability to Work Safely & Wear Required Personal Protective Equipment + Experience utilizing GMAW, GTAW & Carbon Arc Gouging processes + Ability to Complete an 8mm - 2F, 10mm - 2F & 25mm - 2G Weld Qualification Test utilizing 0.052" GMAW weld process + Ability to Follow Standard Work Instructions + Ability to Read Blueprints + Ability to Work Overtime to Support Production Demands **Physical Requirements** + Ability to sit, kneel, squat, or stand for prolonged periods + Ability to climb, work from and descend ladders/platforms/steps + Ability to perform repetitive operations + Ability to lift to 35 lbs. **Perks and Extra Details:** + Overtime is available, based on business need. + You'll have the opportunity for pay increases annually based on performance. + **Day One Benefits!** We offer a total rewards package that provides medical, dental, vision, RX, and 401K for all employees. + Additional benefits include paid vacation days, holidays, personal time off (PTO) and a paid volunteer day (prorated based upon hire date). + Potential to advance your career into operations leadership and other advanced manufacturing jobs. + Safety is a top priority. We provide all personal protective equipment: + Welding Hoods, Jackets & Gloves, + Metatarsal guard steel-toe boots, + Safety glasses & hearing protection + Bump Caps **What you will get:** Our goal at Caterpillar is for _YOU_ to have a rewarding career. Here you earn more than just an hourly wage because we value your performance, we offer a total rewards package that provides Day ONE benefits (medical, dental, vision, RX, and 401K), weekly pay. Additional benefits include paid holidays and paid time off (prorated based upon hire date). **Final details** Resumes **_are required_** . Please do not submit a blank application (no work history or resume attached) as this may lead to disqualification. Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in ( _Be sure to keep your username and password when you initially apply_ ) on our career website as it will reflect any updates to your status. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O **About Caterpillar** Caterpillar Inc. is the world's leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, we've been helping customers build a better, more sustainable world and are committed to and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed. here (*************************************************************************** . **Summary Pay Range:** $21.10 - $26.50 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees **Posting Dates:** January 22, 2026 - March 5, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Your Work Shapes Our World When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Join us. Want to build YOUR career?! LOOK at Caterpillar! We are looking for candidates just like you that want to build more than machines. This is a terrific opportunity to join the Caterpillar North Little Rock AR team as a Welder Apprentice, our 1st shift team earning day ONE benefits and a starting wage of $21.10/hour Caterpillar - North Little Rock utilizes a variety of welding processes within the facility. We have 15 robotic welding cells and over 30 different weld stations to complete daily builds. As a fabricator the main welding process is 0.052" GMAW (MIG) in the 1G/2G & 1F/2F positions. In addition, GTAW (TIG) and Stud Welding are utilized in some weld stations. Candidates must pass the following Welder Qualification Tests at the completion of a Caterpillar provided 6-Week Weld School and 3 Weeks OJT: * 0.052" GMAW - 2F - 8mm - Single Pass * 0.052" GMAW - 2F - 10mm - MULTI-PASS * 0.052" GMAW - 2G - 12.7mm - MULTI-PASS * 0.052" GMAW - 3F - 5mm * GTAW 3F-4F Toe dress Pay Rate and Schedule: * Position includes a wage of $21.10/hour and a comprehensive benefit program * Openings available on 1st shift: Monday - Friday, 7 a.m. - 3 p.m. Overtime opportunities may be available on a voluntary basis based on business needs and with leader prior authorization Basic Qualifications: * Basic Knowledge of Welding Fundamentals * Available to work from 7:00AM to 3:00PM during the introductory training period (6-Weeks in Weld School & 3-Weeks OJT) Top Candidates Will Also Have: * Welding experience and/or successful completion of a Technical or Trade School Welding Course * Ability to Work Safely & Wear Required Personal Protective Equipment * Experience utilizing GMAW, GTAW & Carbon Arc Gouging processes * Ability to Complete an 8mm - 2F, 10mm - 2F & 25mm - 2G Weld Qualification Test utilizing 0.052" GMAW weld process * Ability to Follow Standard Work Instructions * Ability to Read Blueprints * Ability to Work Overtime to Support Production Demands Physical Requirements * Ability to sit, kneel, squat, or stand for prolonged periods * Ability to climb, work from and descend ladders/platforms/steps * Ability to perform repetitive operations * Ability to lift to 35 lbs. Perks and Extra Details: * Overtime is available, based on business need. * You'll have the opportunity for pay increases annually based on performance. * Day One Benefits! We offer a total rewards package that provides medical, dental, vision, RX, and 401K for all employees. * Additional benefits include paid vacation days, holidays, personal time off (PTO) and a paid volunteer day (prorated based upon hire date). * Potential to advance your career into operations leadership and other advanced manufacturing jobs. * Safety is a top priority. We provide all personal protective equipment: * Welding Hoods, Jackets & Gloves, * Metatarsal guard steel-toe boots, * Safety glasses & hearing protection * Bump Caps What you will get: Our goal at Caterpillar is for YOU to have a rewarding career. Here you earn more than just an hourly wage because we value your performance, we offer a total rewards package that provides Day ONE benefits (medical, dental, vision, RX, and 401K), weekly pay. Additional benefits include paid holidays and paid time off (prorated based upon hire date). Final details Resumes are required. Please do not submit a blank application (no work history or resume attached) as this may lead to disqualification. Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in (Be sure to keep your username and password when you initially apply) on our career website as it will reflect any updates to your status. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O About Caterpillar Caterpillar Inc. is the world's leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, we've been helping customers build a better, more sustainable world and are committed to and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed. Not ready to apply? Submit your information to our Talent Network here . Summary Pay Range: $21.10 - $26.50 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: January 22, 2026 - March 5, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Your Work Shapes Our World When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Join us. Want to build YOUR career?! LOOK at Caterpillar! We are looking for candidates just like you that want to build more than machines. This is a terrific opportunity to join the Caterpillar North Little Rock AR team as a Welder Apprentice our 2nd shift team earning day ONE benefits and a starting wage of $21.10/hour + Shift Differential Caterpillar - North Little Rock utilizes a variety of welding processes within the facility. We have 15 robotic welding cells and over 30 different weld stations to complete daily builds. As a fabricator the main welding process is 0.052" GMAW (MIG) in the 1G/2G & 1F/2F positions. In addition, GTAW (TIG) and Stud Welding are utilized in some weld stations. Candidates must pass the following Welder Qualification Tests at the completion of a Caterpillar provided 6-Week Weld School and 3 Weeks OJT: * 0.052" GMAW - 2F - 8mm - Single Pass * 0.052" GMAW - 2F - 10mm - MULTI-PASS * 0.052" GMAW - 2G - 12.7mm - MULTI-PASS * 0.052" GMAW - 3F - 5mm * GTAW 3F-4F Toe dress Pay Rate and Schedule: * Position includes a wage of $21.10/hour + Shift Differential on 2nd Shift.and a comprehensive benefit program * Openings available on 2nd shift: Monday - Friday, 3 p.m - 11 p.m. Overtime opportunities may be available on a voluntary basis based on business needs and with leader prior authorization Basic Qualifications: * Basic Knowledge of Welding Fundamentals * Available to work from 7:00AM to 3:00PM during the introductory training period (6-Weeks in Weld School & 3-Weeks OJT) Top Candidates Will Also Have: * Welding experience and/or successful completion of a Technical or Trade School Welding Course * Ability to Work Safely & Wear Required Personal Protective Equipment * Experience utilizing GMAW, GTAW & Carbon Arc Gouging processes * Ability to Complete an 8mm - 2F, 10mm - 2F & 25mm - 2G Weld Qualification Test utilizing 0.052" GMAW weld process * Ability to Follow Standard Work Instructions * Ability to Read Blueprints * Ability to Work Overtime to Support Production Demands Physical Requirements * Ability to sit, kneel, squat, or stand for prolonged periods * Ability to climb, work from and descend ladders/platforms/steps * Ability to perform repetitive operations * Ability to lift to 35 lbs. Perks and Extra Details: * Overtime is available, based on business need. * You'll have the opportunity for pay increases annually based on performance. * Day One Benefits! We offer a total rewards package that provides medical, dental, vision, RX, and 401K for all employees. * Additional benefits include paid vacation days, holidays, personal time off (PTO) and a paid volunteer day (prorated based upon hire date). * Potential to advance your career into operations leadership and other advanced manufacturing jobs. * Safety is a top priority. We provide all personal protective equipment: * Welding Hoods, Jackets & Gloves, * Metatarsal guard steel-toe boots, * Safety glasses & hearing protection * Bump Caps What you will get: Our goal at Caterpillar is for YOU to have a rewarding career. Here you earn more than just an hourly wage because we value your performance, we offer a total rewards package that provides Day ONE benefits (medical, dental, vision, RX, and 401K), weekly pay. Additional benefits include paid holidays and paid time off (prorated based upon hire date). Final details Resumes are required. Please do not submit a blank application (no work history or resume attached) as this may lead to disqualification. Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in (Be sure to keep your username and password when you initially apply) on our career website as it will reflect any updates to your status. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O About Caterpillar Caterpillar Inc. is the world's leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, we've been helping customers build a better, more sustainable world and are committed to and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed. Not ready to apply? Submit your information to our Talent Network here . Summary Pay Range: $21.10 - $26.50 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: January 22, 2026 - March 5, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Your Work Shapes Our World When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other . We are the makers, problem solvers and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Join us. Want to build YOUR career?! LOOK at Caterpillar! We are looking for candidates just like you that want to build more than machines. This is a terrific opportunity to join the Caterpillar North Little Rock AR team as a Welder Apprentice, our 1st shift team earning day ONE benefits and a starting wage of $21.10/hour Caterpillar - North Little Rock utilizes a variety of welding processes within the facility. We have 15 robotic welding cells and over 30 different weld stations to complete daily builds. As a fabricator the main welding process is 0.052” GMAW (MIG) in the 1G/2G & 1F/2F positions. In addition, GTAW (TIG) and Stud Welding are utilized in some weld stations. Candidates must pass the following Welder Qualification Tests at the completion of a Caterpillar provided 6-Week Weld School and 3 Weeks OJT: 0.052” GMAW - 2F - 8mm - Single Pass 0.052” GMAW - 2F - 10mm - MULTI-PASS 0.052” GMAW - 2G - 12.7mm - MULTI-PASS 0.052” GMAW - 3F - 5mm GTAW 3F-4F Toe dress Pay Rate and Schedule: Position includes a wage of $21.10/hour and a comprehensive benefit program Openings available on 1st shift: Monday - Friday, 7 a.m. - 3 p.m . Overtime opportunities may be available on a voluntary basis based on business needs and with leader prior authorization Basic Qualifications: Basic Knowledge of Welding Fundamentals Available to work from 7:00AM to 3:00PM during the introductory training period (6-Weeks in Weld School & 3-Weeks OJT) Top Candidates Will Also Have: Welding experience and/or successful completion of a Technical or Trade School Welding Course Ability to Work Safely & Wear Required Personal Protective Equipment Experience utilizing GMAW, GTAW & Carbon Arc Gouging processes Ability to Complete an 8mm - 2F, 10mm - 2F & 25mm - 2G Weld Qualification Test utilizing 0.052” GMAW weld process Ability to Follow Standard Work Instructions Ability to Read Blueprints Ability to Work Overtime to Support Production Demands Physical Requirements Ability to sit, kneel, squat, or stand for prolonged periods Ability to climb, work from and descend ladders/platforms/steps Ability to perform repetitive operations Ability to lift to 35 lbs. Perks and Extra Details: Overtime is available, based on business need. You'll have the opportunity for pay increases annually based on performance. Day One Benefits! We offer a total rewards package that provides medical, dental, vision, RX, and 401K for all employees. Additional benefits include paid vacation days, holidays, personal time off (PTO) and a paid volunteer day (prorated based upon hire date). Potential to advance your career into operations leadership and other advanced manufacturing jobs. Safety is a top priority. We provide all personal protective equipment: Welding Hoods, Jackets & Gloves, Metatarsal guard steel-toe boots, Safety glasses & hearing protection Bump Caps What you will get: Our goal at Caterpillar is for YOU to have a rewarding career. Here you earn more than just an hourly wage because we value your performance, we offer a total rewards package that provides Day ONE benefits (medical, dental, vision, RX, and 401K), weekly pay. Additional benefits include paid holidays and paid time off (prorated based upon hire date). Final details Resumes are required . Please do not submit a blank application (no work history or resume attached) as this may lead to disqualification. Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in ( Be sure to keep your username and password when you initially apply ) on our career website as it will reflect any updates to your status. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O About Caterpillar Caterpillar Inc. is the world's leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, we've been helping customers build a better, more sustainable world and are committed to and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed. Not ready to apply? Submit your information to our Talent Network here . Summary Pay Range: $21.10 - $26.50 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Medical, dental, and vision benefits* Paid time off plan (Vacation, Holidays, Volunteer, etc.)* 401(k) savings plans* Health Savings Account (HSA)* Flexible Spending Accounts (FSAs)* Health Lifestyle Programs* Employee Assistance Program* Voluntary Benefits and Employee Discounts* Career Development* Incentive bonus* Disability benefits Life Insurance Parental leave Adoption benefits Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: January 22, 2026 - March 5, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Your Work Shapes Our World When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other . We are the makers, problem solvers and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Join us. Want to build YOUR career?! LOOK at Caterpillar! We are looking for candidates just like you that want to build more than machines. This is a terrific opportunity to join the Caterpillar North Little Rock AR team as a Welder Apprentice our 2nd shift team earning day ONE benefits and a starting wage of $21.10/hour + Shift Differential Caterpillar - North Little Rock utilizes a variety of welding processes within the facility. We have 15 robotic welding cells and over 30 different weld stations to complete daily builds. As a fabricator the main welding process is 0.052” GMAW (MIG) in the 1G/2G & 1F/2F positions. In addition, GTAW (TIG) and Stud Welding are utilized in some weld stations. Candidates must pass the following Welder Qualification Tests at the completion of a Caterpillar provided 6-Week Weld School and 3 Weeks OJT: 0.052” GMAW - 2F - 8mm - Single Pass 0.052” GMAW - 2F - 10mm - MULTI-PASS 0.052” GMAW - 2G - 12.7mm - MULTI-PASS 0.052” GMAW - 3F - 5mm GTAW 3F-4F Toe dress Pay Rate and Schedule: Position includes a wage of $21.10/hour + Shift Differential on 2nd Shift.and a comprehensive benefit program Openings available on 2nd shift: Monday - Friday, 3 p.m - 11 p.m. Overtime opportunities may be available on a voluntary basis based on business needs and with leader prior authorization Basic Qualifications: Basic Knowledge of Welding Fundamentals Available to work from 7:00AM to 3:00PM during the introductory training period (6-Weeks in Weld School & 3-Weeks OJT) Top Candidates Will Also Have: Welding experience and/or successful completion of a Technical or Trade School Welding Course Ability to Work Safely & Wear Required Personal Protective Equipment Experience utilizing GMAW, GTAW & Carbon Arc Gouging processes Ability to Complete an 8mm - 2F, 10mm - 2F & 25mm - 2G Weld Qualification Test utilizing 0.052” GMAW weld process Ability to Follow Standard Work Instructions Ability to Read Blueprints Ability to Work Overtime to Support Production Demands Physical Requirements Ability to sit, kneel, squat, or stand for prolonged periods Ability to climb, work from and descend ladders/platforms/steps Ability to perform repetitive operations Ability to lift to 35 lbs. Perks and Extra Details: Overtime is available, based on business need. You'll have the opportunity for pay increases annually based on performance. Day One Benefits! We offer a total rewards package that provides medical, dental, vision, RX, and 401K for all employees. Additional benefits include paid vacation days, holidays, personal time off (PTO) and a paid volunteer day (prorated based upon hire date). Potential to advance your career into operations leadership and other advanced manufacturing jobs. Safety is a top priority. We provide all personal protective equipment: Welding Hoods, Jackets & Gloves, Metatarsal guard steel-toe boots, Safety glasses & hearing protection Bump Caps What you will get: Our goal at Caterpillar is for YOU to have a rewarding career. Here you earn more than just an hourly wage because we value your performance, we offer a total rewards package that provides Day ONE benefits (medical, dental, vision, RX, and 401K), weekly pay. Additional benefits include paid holidays and paid time off (prorated based upon hire date). Final details Resumes are required . Please do not submit a blank application (no work history or resume attached) as this may lead to disqualification. Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in ( Be sure to keep your username and password when you initially apply ) on our career website as it will reflect any updates to your status. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O About Caterpillar Caterpillar Inc. is the world's leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, we've been helping customers build a better, more sustainable world and are committed to and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed. Not ready to apply? Submit your information to our Talent Network here . Summary Pay Range: $21.10 - $26.50 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Medical, dental, and vision benefits* Paid time off plan (Vacation, Holidays, Volunteer, etc.)* 401(k) savings plans* Health Savings Account (HSA)* Flexible Spending Accounts (FSAs)* Health Lifestyle Programs* Employee Assistance Program* Voluntary Benefits and Employee Discounts* Career Development* Incentive bonus* Disability benefits Life Insurance Parental leave Adoption benefits Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: January 22, 2026 - March 5, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.