Johnson Controls jobs in Des Moines, IA

BECOME A US FOODS DRIVER!Ready to build a career with a company that's leading the foodservice industry?Schedule: Monday - Friday 2:30am 6am start time May occasionally have an over night shift Our delivery drivers start at $31.23 hour. After completion of probation period, wage increases to $33.73 hour! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods helps our customers Make It , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $31.23 and $33.73 Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ********************************************** *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.

Troy Center is hiring an in-person MDS Coordinator in Troy, NY. Completing accurate assessments, MDS & care plans as assigned Initiating care plans and supporting activities as assigned Creating and distributing monthly care plan calendars in a timely fashion Maintaining & updating all care plans and assessments as required Monitoring & auditing clinical records, ensuring accuracy & timeliness Informing DON of persistent issues related to non-compliant documentation Protecting the confidentiality of Resident & Facility information at all times REQUIREMENTS: MUST HAVE PRIOR MDS 3.0 EXPERIENCE Valid New York RN License Long Term Care Experience Required! Must be highly organized, professional & motivated Should have solid computer skills Excellent communication skills Should be friendly and a team worker About us: Troy Center for Rehabilitation and Nursing is an 80-bed rehabilitation and skilled nursing facility located in the South Troy section of the city, minutes away from the eastern bank of the Hudson River. It's a homey, welcoming, well-maintained facility, providing a warm and nurturing environment. Our staff is committed to ensuring the highest quality of life for all our residents, helping each to get stronger, healthier, and happier. We want all residents to leave Troy Center with dignity and independence. Troy Center is a proud member of the Centers Health Care Consortium. Equal Opportunity Employer -M/F/D/V

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Professional Sales Person to join our family. As a Team Partner in the Sales Department, you will be developing new business for UniFirst First Aid retail marketing through high-level selling skills. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Sell and promote First Aid products to new accounts with 75 employees or more and/or multiple locations. Develop new business and penetrate accounts further to sell additional lines with the priority as first aid, facility services, and safety products. Meet new customer needs with products that will help provide a safe, pleasant, and productive workplace. Lead 411 as another tool to grow your prospect hopper. Organize and implement a “work plan' for maximizing daily sales and decreasing mileage between calls. Maintain a call average that is consistent with current company objectives. Promote growth by continuously setting appointments, making cold calls, and gaining referrals for new business. Participate and execute information provided from sales meetings. Submit work orders, paperwork and expense reports as required. Keep paper-flow consistent by ensuring accuracy. Communicate with the local Sales Manager, Territory Manager and the Regional Sales Manager with all pertinent information for any new accounts. Keep abreast of all price changes and sell accordingly. Maintain a prospect database of all accounts being developed. Participate in periodic promotions. Ensure that personal vehicle used for company business is clean, organized, and properly maintained. Adhere to company policies as outlined in the UniFirst Employee handbook and the Green Guard Field Manual. Keep up to date about competitive companies, their products, and prices. Share pertinent information about pricing and products with other employees during sales meetings. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be 18 years of age or older. Valid driver's license and safe driving record are required. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. Two years of business to business selling experience is required. High-level selling skill including strong prospecting and closing skills. Knowledge and exceptional sales experience. Ability to be resourceful. Ability to lift up to 30 lbs. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

This is a hybrid role with 50% on-site requirement in Wilmington, MA. We are seeking a highly analytical, self-driven Senior Financial Analyst to join our FP&A team. This role provides broad visibility across the business and requires strong ownership, curiosity, and the ability to thrive in a fast-paced environment. The ideal candidate combines financial experience with the ability to turn data into insights and influence decisions. You will partner closely with senior leadership and cross-functional teams to lead budgeting, analyze performance, and communicate key financial and operational trends. Success in this role requires driving deep into business, challenging assumptions, identifying risks and opportunities, and delivering forward-looking insights that drive results. Responsibilities: The selected candidate will be able to perform the following duties with or without a reasonable accommodation: Business & Financial Analysis Analyze monthly financial results, investigate trends and anomalies, and clearly communicate key performance drivers, risks, opportunities, and recommendations to finance and business leadership. Own portions of the annual budgeting, forecasting, and long-range planning processes. Develop and enhance financial reporting and dashboards that drive business decisions. Business Partnership & Decision Support Build strong relationships with regional and functional leaders across operations, sales, service and other areas. Partner with business leaders to support strategic initiatives and business cases with sound financial analysis. Communicate insights clearly and confidently to senior leadership in both written and verbal formats. Reporting & Modeling Participate in the preparation of the timely and accurate P&L and KPI reporting packages. Support ongoing and ad hoc reporting and analysis requests with a continuous improvement mindset. Develop and maintain financial models to support scenario analysis, forecasting, and strategic planning. Ownership & Initiative Learn the drivers of the business to deepen insights into financial results and future performance. Manage multiple priorities efficiently with minimal direction, while maintaining accountability for quality and deadlines. Continuously look for ways to streamline processes, improve reporting, and drive better decision-making. Qualifications Bachelor's Degree in Finance or Accounting, Economics, or related field. Advanced Excel and financial modeling skills. 5+ years of progressive financial analysis or FP&A experience. Strong analytical and problem-solving abilities with a high level of accuracy, attention to detail, and intellectual curiosity. Proven experience working independently, managing projects, and driving results with minimal supervision. Excellent communication and storytelling skills, including the ability to translate complex data into clear insights. Strong interpersonal skills with demonstrated success building relationships across all levels of the organization. Working knowledge of U.S.GAAP or core accounting principles. Preferred Experience with Oracle EPM, Hyperion, Smart View, Essbase, or similar applications. Experience with SQL querying. Experience with Power BI, Tableau, and/or other data visualization tools. MBA,CPA, CFA or similar advanced credential. Experience supporting senior leadership in a fast-paced, matrixed environment. The estimated annual salary for this position ranges from $82,500- $110,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. UniFirst offers a Fleet of Benefits, 50+ to be exact! 401K with Company Match Profit Sharing Health Insurance Employee Assistance Program Life Insurance Supplemental Life Insurance Long Term Disability Vacation Sick Time Paid Holidays Direct Payroll Deposit Tuition Reimbursement 30% Employee Discount Employee Referral Program Where will a UniFirst Career take you? As an industry leader in the rental, lease and sale of uniforms and facility services products, UniFirst Corporation has grown to become one of the largest companies in the garment services industry. UniFirst is recognized on the Forbes “Platinum 400 - Best Big Companies” List. With over 14,000 employee Team Partners and more than 250 facilities throughout the United States, Canada, Mexico and Europe, you are never just a number when you work for UniFirst. What sets us apart from all other companies is that we still function as a family run business. When you work for UniFirst, you're family! UniFirst Corporation has a strong history of promoting from within. In fact, most of UniFirst's Senior Managers have come from within the Company. Opportunities are endless for those individuals who possess a strong work ethic, a commitment to quality, and above all else, a passion for delivering quality customer service, both internally and externally. Our culture is what makes UniFirst an organization that stands out from the rest. Are you interested in loving your job? Find out just how far a career with UniFirst can take you. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26071 Job Responsibilities PURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies, tools, gauges, fixtures, and molds). JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): • Determine the best method to manage and complete a project by a designated due date. • Interact with QA, production, R&D, manufacturing, and maintenance to provide solutions. • Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. • List, monitor, maintain, and occasionally purchase components for new tool builds or repairs. • Capable of creating a repeatable setup and working to tolerances of +/-.0002" routinely. • Coordinate work assigned through various auxiliary work centers and equipment as required • Occasionally assist operators and maintenance with machine or processing issues. • Validate the quality of work following standard machining practices and using available measurement equipment and inspection resources. • Effectively communicate with other personnel and educate apprentices in best practices. • Adhere to all written specifications and ensure compliance with all standards. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements BASIC REQUIREMENTS: • Completed an approved Mold Maker or Tool and Die Maker state apprenticeship program or demonstrated the ability to perform the aforementioned tasks. • Must pass the skilled trades assessment test for this position • Proficiently operate all common machining equipment, mills, lathes, grinders, etc. • Work as a team lead as well as a team member depending on the departmental workload. • Awareness of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Time management skills and the ability to work to deadlines in a fast-paced environment. • Proven analytical and troubleshooting abilities as well as a high degree of mechanical aptitude. • Work from design prints, sketches, sample parts and oral instructions. • Moderate hand dexterity is required for this position and the ability to occasionally lift 75 lbs. • Personally possess basic inspection and machining tools to effectively perform job. • Available to work second shift, overtime and weekends as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $38.00/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc... Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Ensure compliance of our measuring devices (i.e. Packers and Stockyards and Nebraska Department of Weights and Measures) Responsible for department budget, including labor and operating expenses Required Qualifications Legal to work in the US without the need of a Visa sponsorship Must be 18 years or older 2 year degree or better in electrical or electromechanical technologies or 3 years of experience with industrial process controls and industrial networking Competency in basic electrical 24 and 120 volt AC and DC circuits Basic knowledge of Windows XP/7 operating systems Ability to read, write and speak English Preferred Qualifications Experience in food processing environment Proficient in Allen-Bradley PLC Programming and troubleshooting, RsLogix 500/Control Logix 5000, Factory Talk View Install and trouble shoot Industrial Networks- Ethernet base and components Ability to read and interpret schematics, general machine installation and repairs Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Manage day-to-day HR operations. Support supervisors and managers, providing HR advice regarding policies and procedures. Plan and ensure facilitation of training, coordinating training schedules. Ensure compliance with required annual training. Ensure compliance and practices of company's basic upward and downward communication promoting a work environment of trust and goodwill. Assist with retention initiatives, focusing on enhanced orientation and job training. Audit HR functions, ensuring compliance with Company policies and guidelines. Conduct investigations ensuring complaints are recorded and properly maintained. Promote community relations throughout the community. All other relevant duties to the job. High School Diploma required; Bachelor Degree in HR, Business or other closely related field preferred. 4+ years HR, employee engagement and relations experience; preferable within a similar manufacturing environment. Excellent communication and interpersonal skills. Excellent knowledge of federal and state employment law (i.e., Title VII, EEOC, ADAA, FMLA, etc.). Excellent conflict resolution skills. Strong technology and computer skills. Organized with attention to detail.

This position will support the Commission Department and report to the Sales Commission Supervisor. The ideal candidate will be very organized with an analytical mindset and attention to detail. Strong Excel knowledge along with the ability to multi-task. This position will research, verify, and validate that all sales credit and commission payout comply with Corporate Policy and Compensation Plans. Review sales commissions for accuracy and compliance to Corporate Policy and Compensation Plans Work directly with Sales Managers and/or Location Managers to resolve any issues Analyze credit and commission data on a weekly basis to provide forecast models and various reports Calculate qualifying sales for monthly commission payout Meet deadlines in timely manner Perform account reconciliations as needed Ensure all supporting backup is verified to accurately payout commissions Utilize multiple databases to ensure accuracy of commissions Respond to sales inquiries in a timely manner Excellent written and verbal communication skills Organized, strong follow up skills Able to work independently and exercise discretion Attention to detail Other duties as needed Qualifications Experience: Strong Microsoft Excel abilities (pivot table, vlookups) Familiarity with the AS/400 system is a plus Accounting background a plus Education: Bachelor's Degree preferred Additional Requirements: Able to multi-task while meeting deadlines. Must be accurate with numbers. Work independently and exercise discretion. The estimated annual salary for this position ranges from $58,000 to $62,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Pay Range: ($20 - $26) Target Bonus: 5.0% Location: Bettendorf Req ID: 27900 Position Summary Responsible for setting up and machining weldments, tubes, blocks, and pins of all sizes in a timely manner using 2-D drawings and programming an ACU-RITE controller, while maintaining exceptional quality. Job Responsibilities Set-up, program, and machine components per print efficiently and accurately Complete any necessary inspection worksheets Maintain little to no re-work or scrap Safely operate forklifts and overhead cranes Keep work area clean and organized Perform job-related duties as assigned per priority. Experience and Skills 1 - 3 years' experience as a machinist Prior experience setting up and operating manual mills preferred Basic PC navigation High attention to detail and quality Ability to read and interpret blue prints Understand basic GD&T call-outs Ability to accurately use standard machinist measuring tools Ability to setup and run “one-off” parts to print efficiently and accurately Must work well under pressure Excellent team player with organizational and time management skills Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards. Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

THIS IS A 2ND SHIFT POSTION. Deliver feed between feed mills, growers and other required destinations. Perform pre-trip inspections to ensure the safety of your loads. Comply with established Company fueling procedures. Communicate with dispatchers on a regular basis. Comply with DOT, company, biosecurity, FSMA, local, state and federal laws, policies, practices and procedures. All other relevant duties to the job. Class A Commercial Driver's License required. 1+ year(s) verifiable commercial driving experience required. Clean motor vehicle driving record required.

Monitor workplace conditions and employee performance enforcing safety policies and procedures. Perform plant and safety evaluations, analysis and audits. Administer OSHA Required Programs and training. Assist with Worker Compensation program. Conduct accident/injury investigations with supervisors. Test the Emergency Protection Systems as necessary and maintain documentation. Participate as a member of the Process Safety Management Program and Risk Management Plan teams. Perform and document Job Safety Analysis (JSA). Work with Supervisors to ensure all On the Job Training emphasizes Safety First. All other relevant duties to the job. Bachelor Degree in an environmental or health related science preferred. Knowledge of OSHA regulations and other general industry safety practices. 3+ years of safety experience within a similar work environment required. OSHA 10 and OSHA 30 certifications preferred. Excellent interpersonal communication skills. Proficient technology and computer skills, including MS Office based programs.

HIRING FOR DAY SHIFT AND NIGHT SHIFT, 12 HOUR ROTATING SHIFTS. Work with a team to ensure equipment is operational. Perform daily preventative and predictive maintenance on equipment. Record and document maintenance performed. Maintain cleanliness of maintenance shop. Follow proper lock-out/tag-out procedures. Assist to ensure adherance to all company, state and federal regulations. All other relevant duties to the job. Manufacturing equipment repair experience required. Ability to replace basic component parts on equipment. Mechanical diagnostics and repair experience. Knowledge of wire belt and plastic conveyor repairs, and sprocket alignment and installation.

HIRING FOR 1ST AND 2ND SHIFTS AT THE PREPARED PLANT. Lead, coach and train a team, providing professional development through ongoing coaching. Safety is of the utmost importance; constantly promote safety throughout the work area and with your team. Responsible for ensuring proper scheduling to run production area. Motivate, train and help the team to optimize performance. Ensure compliance with company policies, and our established food safety programs. Optimize employee engagement through positive leadership. All other relevant duties related to the job of a supervisor. 2+ year leadership and/or supervisory experience required. Bachelor degree in Poultry Science, Animal Science, Business Management, or other related field of study preferred. Excellent interpersonal and communication skills. Proficient technology, computer, mathematical and analytical skills. General knowledge of plant operations, food safety regulations, OSHA guidelines, GMPs and HACCP. Sound work ethic, honesty and moral character.

Maintenance and Reliability Director Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Maintenance and Reliability Director will focus on the deployment of Total Productive Maintenance (TPM) across Multi-Color Corporation in the Americas. This hands-on leadership role oversees a team of four and drives the implementation, execution, and continuous improvement of TPM principles across 38 manufacturing facilities. The Director enhances equipment reliability, operational efficiency, and fosters a culture of safety, quality, and continuous improvement. Key priorities include developing and executing the TPM framework, training and coaching plant staff, facilitating improvement projects, driving standardization and digital transformation, and ensuring alignment with MCC's business priorities Why Work at MCC Competitive compensation Comprehensive benefits package including medical, dental, vision, disability, life insurance, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to lead TPM transformation across a global network and make a lasting impact on MCC's operational excellence journey. Responsibilities Lead and execute the transformation and sustainability of the Total Productive Maintenance (TPM) program across the Americas organization. Develop and deploy TPM strategies aligned with corporate and divisional goals, ensuring long-term operational stability and reliability. Serve as a change agent to lead individuals and teams through TPM implementation and culture transformation. Train, mentor, and coach site leadership teams and maintenance personnel on TPM principles, tools, and methodologies. Identify, prioritize, and manage improvement projects to enhance process yield, reliability, and operational efficiency; ensure visual TPM compliance in War Rooms and at points of impact. Support plants in data-driven decision-making-using root cause analysis, condition-based monitoring, and predictive analytics to improve performance. Collaborate with cross-functional partners including Operations, Engineering, and Corporate Leadership to align TPM with business strategies. Develop and maintain standardized documentation and methodology to ensure consistent TPM deployment across all MCC sites. Promote a strong safety culture and ensure TPM integration with plant safety systems and risk mitigation initiatives. Manage department budgets, allocate resources effectively, and track performance to business priorities. Required Skills and Qualifications Bachelor's degree in Mechanical, Electrical, Chemical, or Industrial Engineering (or related field). Eight or more years of experience leading Maintenance and Reliability programs, with proven TPM deployment expertise. Strong working knowledge of Total Productive Maintenance (TPM) principles, strategies, and tools. Expertise in Computerized Maintenance Management Systems (CMMS). Proven leadership and coaching skills; ability to develop high-performing teams and influence across a matrix organization. Experience in Lean and Continuous Improvement methodologies for process optimization. Strong analytical and problem-solving skills; able to analyze data, identify risks, and make data-driven decisions. Excellent communication and collaboration skills; able to engage and influence stakeholders at all levels. Technical aptitude to integrate new technologies and digital solutions into maintenance practices. Proficient project management skills to plan, execute, and deliver cross-site improvement initiatives effectively. Ability to travel up to 75% (domestic and international as required). Diversity & Inclusion: Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. (Depending on location, the mounting and termination of low voltage devices may have special licensing requirements.) #LI-DR1 #LI-Onsite Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.