Set-Up Operator jobs at Johnson Controls

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27763 Job Responsibilities Build Mechanical sub-assemblies, final assemblies and any other Mechanical task for the job. Follow safety procedures/ training as outlined and identified by Fori Automation management, MIOSHA, and OSHA. Complete as required in process QC check sheets. Complete as required QC audits. Assure good craftsmanship on jobs that are being built. Follow good housekeeping practices. Take direction from Leader and/or Supervisor Provide feedback on job status to Mechanical Assembly Leader. Know and understand due dates for jobs and schedule work accordingly. Follow-up with supervisor on daily basis to report progress of job(s) being worked on. Assist in disassembly, packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with receiving when required. Assist in start-up/de-bug of equipment. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Read and interpret build prints. Work with Mechanical Engineers and build Leaders to correct any problems with design of the machine/controls. Recommend, initiate, and follow-up as needed on engineering changes and document according to ECO procedures. Work on continuous improvement projects as needed. Support special assignments as needed. Provide training and assistance to new employees. Job Requirements High School Diploma required 5 years experience as a Machine Builder Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

This position is responsible for a variety of tasks to package quality cheese that meets customer expectations and supports the achievement of the company's vision, mission and values. Essential Functions Assemble, line, fill and seal 640-pound boxes of cheese according to SOPs. Operate packaging room production equipment according to SOPs. Monitor box weight targets according to cheese types. Maintain good communications with lead and/or supervisor to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Actively participate in extraneous prevention and solids recovery. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Comply with all company safety rules to achieve no injuries and no lost-time accidents. Understand and adhere to all GMPs and food safety policies and procedures and perform all work in a manner that ensures the highest standard of food safety and quality. Perform regular CIP and general housekeeping responsibilities. Safely handle, prepare and use chemicals while wearing proper PPE. Assist in training of new or untrained packaging room employees. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for day shift are from 5:00 a.m. - 5:00 p.m. and night shift from 5:00 p.m. - 5:00 a.m. This position will work alternating weekends. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00 AM to 5:00 PM or 5:00 PM to 5:00 AM

This position is responsible for a variety of tasks to package quality cheese that meets customer expectations and supports the achievement of the company's vision, mission and values. Essential Functions Assemble, line, fill and seal 640-pound boxes of cheese according to SOPs. Operate packaging room production equipment according to SOPs. Monitor box weight targets according to cheese types. Maintain good communications with lead and/or supervisor to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Actively participate in extraneous prevention and solids recovery. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Comply with all company safety rules to achieve no injuries and no lost-time accidents. Understand and adhere to all GMPs and food safety policies and procedures and perform all work in a manner that ensures the highest standard of food safety and quality. Perform regular CIP and general housekeeping responsibilities. Safely handle, prepare and use chemicals while wearing proper PPE. Assist in training of new or untrained packaging room employees. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for day shift are from 5:00 a.m. - 5:00 p.m. and night shift from 5:00 p.m. - 5:00 a.m. This position will work alternating weekends. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00 AM to 5:00 PM or 5:00 PM to 5:00 AM

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

This position is responsible for a variety of tasks to package quality cheese that meets customer expectations and supports the achievement of the company's vision, mission and values. Essential Functions Assemble, line, fill and seal 640-pound boxes of cheese according to SOPs. Operate packaging room production equipment according to SOPs. Monitor box weight targets according to cheese types. Maintain good communications with lead and/or supervisor to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Actively participate in extraneous prevention and solids recovery. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Comply with all company safety rules to achieve no injuries and no lost-time accidents. Understand and adhere to all GMPs and food safety policies and procedures and perform all work in a manner that ensures the highest standard of food safety and quality. Perform regular CIP and general housekeeping responsibilities. Safely handle, prepare and use chemicals while wearing proper PPE. Assist in training of new or untrained packaging room employees. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for day shift are from 5:00 a.m. - 5:00 p.m. and night shift from 5:00 p.m. - 5:00 a.m. This position will work alternating weekends. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00 AM to 5:00 PM or 5:00 PM to 5:00 AM

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

Stevens Industries is looking for skilled CNC Machine Operators to cut, band, and drill cabinet parts for production. A machine operator needs to possess attention to detail and a willingness to learn. On-the-job training is vital to the success ofa machine operator and allows for the potential to become a senior operator. Being a team player is essential since all tasks require close collaboration with co-workers. Ability to troubleshoot the machine to maintain efficiency and quality of product is important. RESPONSIBILITIES: 1. Set up machine for production 2. Adjust and control machine speed setting 3. Feed raw material or parts into semi-automated machines 4. Ensure parts are correct compared to drawing and make corrections/adjustments as needed 5. Check for any mistakes or flaws in parts 6. Maintain records of units produced 7. Keep production flowing by ensuring parts are complete 8. Ability to be a good team member and contribute to a team environment. Requirements 1. Preferred machine operating experience 2. Ability to read blueprint and computer programs 3. Skill in operating CNC machinery and tooling as well as precision measurement tools 4. Ability to read and interpret mechanical documents and drawings 5. Mechanical aptitude and good math skills 6. A keen eye for detail and results-driven approach 7. Good communication abilities BENEFITS: • Highly competitive salary and bonus structure • On-Demand Pay - Access your earned pay prior to payday • 100% Company-Paid Employee Health Insurance, Life Insurance, & Disability Insurance • Competitive Paid Time Off Plan plus 9 Paid Holidays • 200% Company 401(K) Match • Annual Profit-Sharing Bonuses • Company Stock Options • Dental & Vision Insurance • Health Savings Account with Company match • On-site Childcare for Employees' Children and Grandchildren • Educational Assistance Plan • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. The pay range provided represents the expected compensation for this position. Actual pay will be determined based on factors such as experience, skills, and qualifications, while maintaining fairness with internal pay structures. We ensure compliance with all applicable wage and hour laws, including those related to minimum pay requirements. Salary Description $20-$27.50 per hour (includes shift differential)

We are seeking a CNC/Laser Programmer to join our Engineering team. This role is dedicated to programming and CAD/CAM support - not machine operation. The Programmer will be responsible for creating, optimizing, and maintaining programs and CAD files for CNC laser and fabrication equipment, ensuring accuracy, efficiency, and manufacturability. The ideal candidate has strong CAD/CAM expertise, experience in nesting and toolpath optimization, and a collaborative mindset to support both Engineering and Production. Key Responsibilities Develop CNC and laser programs from engineering drawings, CAD files, and product specifications. Translate 2D/3D CAD drawings into optimized machine-readable formats (nesting, toolpath). Create and maintain program libraries, ensuring version control and accuracy. Optimize material utilization and reduce scrap through effective nesting strategies. Partner with Engineering to improve manufacturability and standardize programming practices. Collaborate with operators to troubleshoot issues, but remain engineering-focused (not machine operation). Support introduction of new products and processes, ensuring smooth transition from design to production. Maintain documentation of programming standards, CAD files, and procedures. Contribute to continuous improvement and process optimization within fabrication operations. Assist in equipment specification and evaluation during capital projects (when programming input is required). Qualifications 3+ years of CNC/laser programming experience in a fabrication or sheet metal environment. Proficiency with SigmaNest and AutoCAD required; familiarity with other CAM systems (e.g. CAMPlus, CAMProX, SheetCam) a plus. Strong understanding of fabrication processes (cutting, bending, assembly). Experience with nesting, toolpath optimization, and CAD file preparation. Excellent attention to detail, organizational skills, and version control discipline. Strong communication and collaboration skills across Engineering, Production, and Quality. Familiarity with Lean Manufacturing and process improvement methods preferred. Exposure to PLC programming and robotics a plus but not required.

Key Areas of Responsibility Perform set-up and operate slitting equipment to produce product according to quality and productivity requirements Ensures that equipment runs in accordance with operational standards Performs minor repairs and preventative maintenance as needed Ensure the correct raw materials are being processed Maintains a safe working environment by following all company safety policies and procedures and reports unsafe conditions and incidents Makes adjustment to the machine during production by responding to problems found during visual inspection Assumes responsibility for the quality and quantity produced on the machine Obtains information from the computer, prints and applies labels Posts production information into the computer and/or required production logs Accurately performs and records all required testing Provide communication on a daily basis with management, maintenance, shift personnel, etc. Maintain housekeeping standards of slitter and the surrounding area Perform packing and material handling tasks as required Anticipates and reacts productively to changes, and willingly handles other tasks as assigned Seeks and implements improvement activities through teamwork and CI Process participation Perform other duties as assigned Qualifications High School diploma or equivalent. Two-year technical degree preferred. Two or more years slitting experience preferred Good mechanical ability Ability to use rulers, gauges and calipers Working knowledge of the hazards and safety precautions common to working with moving equipment Effective communications and interpersonal skills to work as a team member Ability to work independently and make good decisions without constant supervision Well-developed work habits to ensure smooth machine operation and minimal downtime Proficiency with computers; ability to learn and use additional programs Ability to distinguish differences between finished product and product specifications Ability to identify maintenance needs and ensure that all required preventive maintenance is performed Ability to lift products up to 50 lbs Ability to work in a standing position for long periods of time Other physical demands include climbing, crouching, bending, reaching, stooping, etc.

The Production Operator is responsible for performing several manufacturing functions and supporting plant operations in the production area. Essential Duties, Responsibilities and Accountabilities: (Include the following; however, other duties may apply.) Reviews and completes required paperwork for Production operations. Performs typical production functions to include operating equipment, moving material, verifying dimensions, and required quality inspections. Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Detects and reports defective materials or questionable conditions to the Production Supervisor/Manager. Performs operator level Preventative Maintenance, Checks and Services on machines as required. May operate a forklift if certified to do so. Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must ensure the accuracy of information and be able to multitask in a fast-paced environment. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience: A high school diploma or GED is necessary for this position. The candidate should possess the capability to acquire proficiency in operating calipers, demonstrating a willingness to learn and adapt to this essential tool. Furthermore, the individual should be capable of executing basic set-up functions on machinery, showcasing hands-on competence in machine operations. Additionally, a crucial skill set includes the ability to read and interpret various documents such as prints, production orders, safety rules, as well as operating and maintenance instructions. This multifaceted skill combination is vital for successful performance in the specified role. Language skills: The position requires strong verbal communication skills and the ability to work effectively in a team, demonstrating sound judgment in decision-making. Candidates should also be able to read, interpret and translate documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to perform basic mathematical computations; ability to convert metric units correctly and apply the conversions to practical situations. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Ability to read and understand laboratory standards, policies, and instructions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Our Livonia facility has an exciting and rewarding career opportunity, and is seeking a CNC Programmer in Lavonia MI to create 3 ,4 and 5 axis programs for the shop machines. (High speed milling machines), Drive improvements in manufacturing performance and consistency. This position will require travel as a part of training to our Peabody MA site. If you are a career-minded, results-oriented individual who thrives in a fast-paced environment, please submit your resume for further consideration. Core Responsibilities: Create CNC programs for several machines using NX and Vericut software's. Multi axis 3-D programming. Programming for High-speed cutting of hardened steels and electrodes used in the production of high precision injection molds. Programming for a horizontal mill used in soft machining of steels and some plastics. Produces CNC programs for production using 3D CAD/CAM software. Prepares electrode drawings for use in the shop environment. Addresses and documents cause and corrective action issues to prevent future problem occurrences. Modifies drawings as directed by engineer. Assists in creating and maintaining standards to ensure product quality. Writes technical documents for products, including machining instructions and setup sheets. Able to work with extremely tight tolerances and use of the Metric system. Other related duties and projects as assigned. Qualifications: Experience using NX software, or comparable programming software. Proficient use of 3D CAD\CAM software, NX or similar preferred. Must have machine shop experience. Strong blueprint reading skills a must. Understanding and ability to update and modify databases associated with CAD/CAM software. Thorough understanding of the creation of Multi Axis programs to fully convey form, fit, function along with most efficient manufacturing of components. Knowledge of machining practices/principles, /dimensional analysis/Tolerancing/ Speeds and Feeds Technical judgment and problem-solving skills. Interpersonal skills and written/oral communication skills. Attention to detail. Able to understand standard applications and provide technical solutions to co-workers. Able to adapt as priorities and directions change. High ethical standards and team player. Able to work with limited direction. Knowledge of quality procedures for ISO 9000 / AS9100, preferred. Proficient use of Microsoft Office.

We are seeking a skilled CNC Mill programmer specializing in Mills to work from supplied documentation to create programs, manufacture one off and prototype components for a multitude of applications across a variety of industries. We have a strong history in the machining market in Seattle with our campus covering over 250,000 square feet of manufacturing space. You will be challenged with exotic metals, prototypes, gears, splines, and other unique projects every day. Responsibilities: Write and/or modify CNC programs and instructions for Mill, and multi-axis / mill-turn machined parts utilizing Siemens NX. Ability to write and / or modify programs for weldments, assemblies and billets. Analyze job orders, drawings, blueprints, specifications, and design data to determine the appropriate machine tool, work holding and cutter selection. Coordinate program start-ups in manufacturing, assist in troubleshooting and provide recommendations for manufacturability. Observe machine trial runs or conduct computer simulations to ensure programs and machinery function as needed. Skills: 5 - 10 years CNC Mill programming. Previous experience working in a job-shop manufacturing environment. Expert hands-on knowledge of CAD/CAM and Siemens NX software operation. An expert level of programming prototype / one off components on 3 and 4-axis mills, and multi-axis mill-turn machines. Working knowledge of tool path creation, speeds/feeds, cutting tool selection Professional approach; collaborating with other team members ensuring accuracy, manufacturability, and continuity. High level of competency in all areas of shop math, machine controls, materials, and tooling. This is an opportunity for you to challenge yourself and get better at what you do every day. It will not be easy but will put you in a position to become a valued member of our team, working on cutting-edge parts and technology. Are we talking about you, apply on-line, or email your resume to ************************** or call on ************.send us your resume for consideration. Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability . Position is subject to export control regulations as defined in 22 CFR 120.62

Why You'll Love Working Here At The Gund Company, we're more than a manufacturer-we're a team of problem-solvers who love what we do! We specialize in electrical insulation solutions and pride ourselves on innovation, collaboration, and growth. As an Employee-Owned Company (ESOP), your success is our success. What You'll Do As a CNC Programmer II, you'll take on advanced programming responsibilities to keep our production running smoothly: Develop CNC Programs: Create and optimize programs for complex parts using CAD/CAM software. Analyze & Plan: Interpret blueprints, calculate dimensions, and determine machining sequences. Tooling Expertise: Select cutting tools, speeds, and feeds for precision machining. Quality & Safety: Conduct tests, inspections, and ensure compliance with safety standards. Collaborate & Lead: Work with machinists and engineers and provide training or guidance to team members. Problem-Solve: Tackle challenging projects with advanced math and technical skills. What We're Looking For 3+ years CNC programming experience Strong knowledge of Mastercam, CAD/CAM, and blueprint reading Advanced math and problem-solving skills Ability to work independently and adapt to urgent changes High School Diploma or GED required; vocational training preferred Ability to lift up to 40 lbs. and work in a hands-on environment Perks & Benefits Competitive pay starting at $30/hr. Paid Time Off & Holidays Comprehensive Health, Dental, Vision, Life, and Disability coverage 401(k) with 50% employer match Employee Stock Ownership Plan (ESOP) - 30% employee-owned! Ongoing training and career development opportunities Benefits Paid Time Off (PTO) and Paid Holidays Comprehensive benefits package (Health, Dental, Vision, Life, Disability). 401(k) plan with a 50% employer match. Employee Stock Ownership Plan (ESOP). Ongoing training and development programs. Join a company that values your contribution and invests in your future. Apply today to start your career with The Gund Company! Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions of the CNC Programmer I position. EEO Statement: It is the policy of The Gund Company to recruit, hire, train, and promote employees without discrimination.

28800 Ida St Valley Nebraska 68064-8016 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. Starting at $26+/hr Available Shift: 1st Brief Summary Manage the cutting of tubing, scrap, and randoms from the mills to customer requirements or to stock lengths using the five saws in the department. The department is also responsible for operating the hydro test stand. The work is fast paced and repetitious based on the machine operated. Essential Functions: Bring in tubing bundles using side-loader and unload with crane or roll from racks. Cut tubing using one of two saws, out of a total of five, ensuring finished tubing conforms to production specifications, and that equipment maintains proper working order, such as blade sharpness, cutting speed, pressure. Debar cut ends with die grinder using proper protective equipment and bundle to correct size and to customer requirements. Maintain clean work area by placing bundles in designated areas, dumping scrap hopper in proper trailer, cleaning equipment, floor and desk, and recovering equipment. Maintain required product documentation by matching bundle tags, count, order number with correct production card, record production work completed on work orders, and record equipment information such as breakdowns, blade changes, tolerances. You will report to Production Supervisor and have no direct reports. Important Details You will operate band saws and rotating-head lathe machines to cut tubing according to specifications and customer requirements. The Lathe Operator is also responsible for using a die grinder to safely debur cut ends. It is also important to maintain required documentation with required information including counts, production reporting, work orders, equipment information, and records of any breakdowns, blade changes, and other information. The Lathe Operator is also expected to maintain a clean work area and place finished bundles in the proper designated area. Required Qualifications One (1) year relevant experience with mechanized production equipment. Mathematical skills - addition, subtraction, multiplication, and division in all units of measure, using whole numbers, common fractions and decimals. Skill in keeping accurate records, inventory, inspecting finished product for quality, and a strong attention to detail. Ability to read a tape measure, micrometers, and square to ensure tube length, gauge, & square. Ability to communicate effectively both verbally and in writing to co-workers, supervisors, and employees from other departments within the division. Ability to read and interpret blueprints, production cards, simple instructions, short correspondence, and memos. Ability to work independently with little supervision and meet production deadlines. Ability to acquire a Valmont forklift operator's certification. Ability to operate cranes and take required training course. Acceptable performance and attendance history. Highly Qualified One year of previous experience in a manufacturing or fabrication environment Ability to work in a high volume, fast paced environment Ability to pay attention to detail and follow work instructions Ability to identify and communicate maintenance or product problems to departmental Three (3) years machining experience Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability or protected veteran status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionNow hiring for Milling & Turning Operators in the Gastonia area. Monday - Friday 7:00am - 3:30pm Monday - Thursday 3:30pm - 2:00am Starts at $16-$30hr Weekly pay & benefits This facility is a metal working corporation that Machines and Fabricates component parts and complete assemblies for the Automotive, Medical, Pump and Valve, Material Handling, Earth Moving industries, Architecture, and OEM equipment. Review customer drawings and specifications, operate and/or set up, and/or program CNC lathes and Mills with Fanuc G code or similar controls Operators will run parts and inspect and learn over time to to change and touch off tools and make set ups Setup personnel will load programs, load tools, bore or indicate jaws, touch off tools, walk program through first piece approval and then run machines as needed Set up personnel will also run machines for production as needed Programmers will write, edit, and set up Jobs at the machine 2 years experience - Blueprint reading required For immediate consideration: Apply to this job listing then give our office a call at ************ to get scheduled for an interview

About the Role: The Lathe Operator plays a critical role in our manufacturing process by precisely shaping and machining steel components to meet exact specifications. This position requires operating lathe machines to cut, shape, and finish steel parts used in various industrial applications, ensuring high-quality output and adherence to safety standards. The operator will interpret technical drawings and blueprints to set up and machine the parts accordingly, maintaining tolerances and consistent production quality to producing components that meet rigorous industry standards and customer requirements. Attention to detail and mechanical aptitude are essential to troubleshoot machine issues and perform routine maintenance to minimize downtime. *This role is located in Warren, MI Minimum Qualifications: High school diploma or equivalent. Proven experience operating a lathe in a manufacturing environment Basic understanding of mechanical drawings, blueprints, and machining symbols. Ability to follow safety protocols and maintain a clean work environment. Preferred Qualifications: Certification in machining or CNC lathe operation. Experience with CNC lathe programming and operation. Basic knowledge of metallurgy and steel properties. Strong problem-solving skills and mechanical aptitude. Responsibilities: Set up and operate lathe machines to cut, shape, and finish steel parts according to technical drawings and specifications. Inspect finished products for quality and dimensional accuracy. Perform routine maintenance and cleaning of lathe equipment to ensure optimal performance and safety compliance. Adjust machine settings and tooling to accommodate different steel materials and part designs. Collaborate with production supervisors and quality control teams to meet production schedules and quality standards. Identify and troubleshoot mechanical issues promptly to minimize production delays. Maintain accurate records of production output, machine maintenance, and quality inspections. Skills: The required skills enable the Lathe Operator to accurately interpret technical drawings and operate lathe machinery to produce steel components that meet precise specifications. Proficiency with measuring instruments ensures that parts are inspected and verified for quality and dimensional accuracy. Safety awareness and adherence to protocols are critical to maintaining a safe work environment while handling heavy machinery and steel materials. Preferred skills such as CNC programming and basic knowledge of metallurgy enhance the operator's ability to work with equipment to optimize machining processes. Strong problem-solving abilities allow the operator to quickly diagnose and resolve mechanical issues, ensuring continuous production flow and minimizing downtime. Compensation details: 20-28 Hourly Wage PIfee259659cc7-31181-39227863

KEY RESPONSIBILITIES * Responsible for the basic setup, program adjustments, operation, and maintenance of the machine * Determine specifications and job instructions from reading blueprints, examining work orders, and standard work instructions * Ability to read weld symbols and tack * Measure, inspect and test completed metal products to ensure compliance with specifications * Complete documentation in a timely manner * Understand plant safety guidelines and pass all required safety training * Maintains good housekeeping and clean work areas in assigned space * Act, Live, and Behave by TCF Core Values. * Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS * Typically requires a high school diploma and up to 2 years of experience * Read and understand shop orders and blueprints, safety rules, standard work instructions written in English. * Basic math skills to include addition, subtraction, multiplication, and division in all units of measure including whole numbers, fractions, and decimals. Ability to read a tape measure. * Ability to use hand tools in a safe and proper manner. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: * JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety * Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS To successfully perform the essential function of this position, employees must have the ability to: * Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds; and occasionally lift/move up to 50 pounds. * Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. * Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. * Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.

Job Description The Sanding and Robot Operator - 3rd Shift position sets up, operates and maintains multiple robotic sanding cells as trained and instructed to meet or exceed defined production targets. ESSENTIAL DUTIES AND RESPONSIBILITIES (other duties as assigned) Operates multiple robotic sanding cells with the loading and unloading of helmets to maximize robot time sanding while also ensuring quality. Identify helmet models to be sanded and correctly set the machine fixturing to ensure quality sanding. Load and unload helmets from the fixturing proplerly. Organize and maintain the machine fixturing so that they can be easily found as needed. Operate the computer controls of each cell to select the proper program for the paint color being sanded. Load the robot sanding tool as needed with the proper sand paper grit per the program running. Change the interface pads and backup pads on each cell running as needed to maintain quality sanding. Identify and communicate issues quickly to the GrayMatter Team using the Hot Line and the Team Viewer communication tool. Communicate issues immediately to Team Leader and Supervisor. Observes all safety rules and regulations. Exercises care and good judgment at all times to prevent accidents and injuries. Adheres to all company policies, procedures, rules, and BRG Code of Conduct. Practices good housekeeping by keeping work cells clean and organized. Performs other duties and tasks as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to satisfactorily perform each essential duty and responsibility listed above. The job requirements and physical demands listed below are representative of the required knowledge, skill, and/or ability to perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities. JOB REQUIREMENTS Authorized to work in the U.S. SKILLS Ability to perform simple mathematical calculations. Ability to effectively relate with others and cooperate as a team member. Ability to perform essential functions and responsibilities of the job with some supervision. Must be flexible. Careful attention to detail. Ability to communicate effectively in one-on-one and small group situations within the organization as well as to GrayMatter Robotics using the HotLine and Team Viewer app. Ability to rely on judgment for personal safety regarding work. Ability to write simple correspondence to communicate issues between shifts. PHYSICAL DEMANDS Must be able to lift and/or move up to 50 pounds at a time. Sufficient hand, eye, arm, and finger dexterity to load and unload the robotic sanding fixtures. Must wear safety glasses and hearing protection in designated areas. Prolonged periods of standing and/or walking while also performing repetitive tasks. Prolonged periods of bending/twisting throughout a work shift.