Journeyman jobs in Brownsville, TX - 24 jobs

Construction Craftsman Job Description ** Construction Craftsman **Department:** Rigging / Construction **Employment Type:** Full-time The Construction Craftsman is responsible for preparing, setting, aligning, and securing heavy equipment and machinery on job sites. This role includes inspecting and selecting rigging gear, following OSHA safety standards, and coordinating with crane operators and construction teams. The ideal candidate must demonstrate attention to detail, a commitment to safety, and the ability to work at heights and in confined spaces under varying conditions. Responsibilities & Duties Complete and discuss a thorough Job Safety Analysis (JSA) prior to each task. Maintain a positive attitude towards both internal and external customer service. Inspect and prepare loads that need to be moved. Set, align, and level heavy equipment and machinery. Select and prepare the appropriate rigging gear including beams, pulleys, clamps, and bolts. Ensure compliance with state and company safety procedures. Communicate effectively with the rigging and construction team. Break down rigging equipment and conduct post-rigging inspections. Assist equipment operators as needed. Properly torque and rig equipment and machinery. Direct crane operators on proper equipment placement. Test installed machinery and make necessary adjustments or repairs. Perform hot bolt and torque procedures as required. Observe and comply with all safety and project-specific rules. Perform other duties as assigned. Qualifications and Requirements Preferably 3-6 months of experience in rigging operations. Preferably 1 year of experience in steel erection or structural fabrication. Familiarity with OSHA safety standards is required. In-depth knowledge of rigging equipment and heavy machinery. Must be able to meet all physical requirements of the job. Must have all required tools. Expected to climb and work at heights and in confined spaces (up to or exceeding 200 feet). Able to work outdoors in all weather conditions. Available to work overtime, nights, and weekends as required by project needs. HSE Responsibilities Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” - Vision & Mission Statement as fundamental core values. Demonstrate implementation of proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture. Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, best practices, and client-specific site policies. Make a personal commitment and be accountable for HSE results, supporting team members through coaching and mentoring to achieve goals. Accept coaching and demonstrate ownership and improvement of HSE processes based on feedback and ongoing mentorship.

Facility Solutions Group is dedicated to timeless contribution and service in lighting, electrical, energy, and technology fields. Our mission is to consistently provide our customers with superior value through quality products, service and support by contributing to the quality of life of all employees. As one of the nation's largest single-source providers of lighting and electrical products, electrical services, electrical construction, and energy management solutions Facility Solutions Group is expanding their staff and seeking a Journeyman Electrician to join our FSG - Harlingen team. As a Journeyman Electrician, you will plan layouts, install and repair wiring, electrical fixtures, apparatus, and control equipment for commercial lighting. The ideal candidate will have experience in commercial lighting and electrical maintenance, as well as promote the core values of FSG through excellent customer service and assuring the safety of all work. A Journeyman Electrician will: Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications, safety codes and local electrical codes. Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes. Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels; installs Buss, Busbar, electrical feeders, power systems and/or switchgear. Repairs faulty equipment or systems. Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures. Advise management on whether continued operation of equipment could be hazardous. Meets attendance standards and complies with late/absence notification procedures. Maintain current electrician's license or identification card to meet governmental regulations. The ideal candidate will satisfy the following requirements and qualifications: High School Diploma or General Education Degree MUST have current State Issued Journeyman Electrician's License Must possess valid driver's license Ability to multitask while staying organized Strong verbal and written communications skills Positive customer service skills Experience in lighting a plus! WHAT WE OFFER: * Consistent and steady work * Full Benefits after 60 days including health, Life, dental and vision * 401k Matching form First day! * 22 days PTO , rolls over and has cash out options * Paid Weekly FSG is an EEO/Affirmative Action Employer: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status. * HARLINGEN *

Lay-out, assemble, install, or maintain pipe systems, pipe supports or related hydraulic or pneumatic equipment in accordance with all applicable plans, specifications, codes and industry standards. • Reading isometric drawings, taking measurements, fabricating and installing piping efficiently • Align, bolt, and clamp together components of fabricated metal products to secure in position for welding • Assemble and secure pipes, tubes, fittings, and related equipment according to specifications by welding and threading joints • Position and secure materials and workpieces during installation; and install all other items in accordance with the applicable plans and specifications • Distinguish varying thickness and types of metal materials • Manually handle and securely apply rigging equipment • Operate tools and equipment including: beveling machines, cut-off grinders, hammers torches, magnetic drills, and a Saw-Zall • Layout and install equipment, vessels, skids, pumps, pipe, and supports • Hydro test piping systems Qualifications • May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. • Must possess working knowledge skills and abilities for position. • Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. • Ability to use hand tools, power tools and layout tools safe and efficiently. Requirements • Able to meet all physical requirements. • Must have all required tools • Expected to climb and work at heights and in confined spaces (may exceed 200 ft) • Able to work outdoors in all weather conditions • Able to work overtime, nights, and weekends as required by the workload • Observe and comply with all safety and project rules. Performs other duties as required. Labor One Staffing is an Equal Opportunity Employer.

1. Reads and understand blueprints. Understanding of elevations given, understanding bundle tags. 2. Aid in rigging operations, connections and disconnections. 3. Selects rods, bundle, measures, cuts to length, bend, and shapes reinforcing bar to exacting specifications. 4. Places rods in forms, spacing and fastening them together, using wire and pliers. 5. Knowledge of the weights of the different bar sizes per foot as well as bar diameters. 6. Positions and secures steel bars in concrete forms and reinforces concrete. 7. Cuts bars to required lengths, using a hacksaw, band saws, or acetylene torch. 8. Bends steel rods with hickey bars or a rod-bending machine. 9. May reinforce concrete with wire mesh. 10. Insures that all reinforcing material is in its proper position so that it receives its intended structural load. 11. Loads transports, unloads materials, tools, equipment, and supplies. 12. Assists in lifting, positioning, and securing of materials and work pieces during installation. 13. Cleans and performs minor maintenance activities on tools and equipment. 14. Restocks supplies and materials as necessary. 15. Must be able to safely traverse uneven terrain with / without tools and building materials. 16. Must be able to climb vertical ladders and work above ground as necessary. 17. Performs a variety of tasks involving safe dexterous use of hand tools. 18. Safely operates power tools and equipment. 19. Must be able to climb rebar cages and walls and work at height while hanging from rebar structures. 20. Adheres to all safety procedures. 21. Typically requires 48 months of industrial construction experience.

**PLEASE READ BEFORE APPLYING** *This posting does not indicate that there is a position immediately open for which you are applying. !** As a Journeyman Electrician, you will lead a crew under the guidance of a Master Electrician to supervise the installation, alteration, addition and/or repair of electrical systems on commercial work sites. The ideal candidate should work from a position of “Safety First Always” and utilize all safety equipment and training provided to ensure compliance with OSHA and other safety regulations. Benefits: Competitive pay (weekly) Health, Dental, Vision, Life & other insurances available (after 60 days of service) Paid Time Off 401(k) Plan w/ (after 1 year of service) Overtime available Home every night (work is ONLY in the RGV) Requirements Core Responsibilities: Ensure commercial electrical systems are installed, maintained, and repaired safely & efficiently Read & interpret blueprints to plan & layout electrical systems Utilize hand tools safely & effectively for various tasks related to building and maintaining electrical systems Ensure compliance with all safety regulations and codes during all electrical work Coordinate with other tradespeople and contractors for seamless project integration and completion of projects on time Troubleshoot electrical issues using tools such as an ohmmeter and other diagnostic equipment Maintain detailed documentation for future reference Perform other project related duties assigned by General Contractor or other senior Electrician Essential Skills: Proficiency in blueprint reading and a solid understanding of electrical principles and concepts per the National Electric Code (NEC) Extensive knowledge and experience in electrical systems, with the ability to work on high voltage installations and renovations Ability to accept constructive criticism, follow directions and collaborate effectively as part of a team Ability to prioritize tasks and manage time effectively in a fast-paced environment Excellent problem-solving skills with attention to detail and a commitment to safety Desired Qualifications: Must pass a drug screen High school diploma or equivalent Valid TDLR Journeyman License At least 2 years Commercial Electrical Experience preferred Have own hand tools; we will provide specialty tools

About Us A Fortune 500 company, EMCOR Group, Inc. (NYSE: EME) is a leader in mechanical and electrical construction, industrial and energy infrastructure, and building services. EMCOR companies plan, install, operate, maintain, and protect the sophisticated and dynamic systems that create facility environments-such as electrical, mechanical, lighting, air conditioning, heating, security, fire protection, and power generation systems-in virtually every sector of the economy and for a diverse range of businesses, organizations, and government. Job Summary Rabalais I&E Constructors 11200 Up River Road Corpus Christi, Texas 78410 Rabalais I&E Constructors is currently seeking Commercial Journeyman Electricians for the Port Isabel area. Commercial experience is preferred, and a state license is required. Essential Duties & Responsibilities About Us: Since 1984, Rabalais Instrument & Electrical Constructors has been meeting and exceeding client expectations on projects ranging from industrial and commercial electrical, instrumentation, and control services to installation, repair, and maintenance services for residential, commercial, and industrial facilities. With an experienced, highly skilled staff, cutting edge technology, and a passion for safety and quality, Rabalais provides top-quality services in a timely and cost-effective manner. In fact, Rabalais has built a reputation as one of the most reliable and respected electrical and instrumentation contractors in the nation. The management team at Rabalais brings a combined experience of over 500 years to each project the company undertakes. Job Description: Assists electrician to install and repair electrical wiring, fixtures, and equipment. Measures, cuts, and bends wires and conduit using ruler and hand tools. Drills holes for wiring using power drill and pulls or pushes wiring through opening. Assists in lifting, positioning, and fastening objects, such as wiring, conduit, and motors. Performs minor repairs, such as replacing fuses, light sockets, bulbs, and switches using hand tools. Maintains tools and equipment and keeps supplies and parts in order. Disassembles defective electrical equipment, such as motors using hand tools. Load, transport, unload, and furnish Electrician with materials, tools, equipment, and supplies. Clean work area and restock supplies and materials as necessary. May erect scaffolding. May assist in lifting, positioning, and securing of materials during installation. Perform other routine duties as directed by experienced craft person. Job Performance Requirements: Must be able to furnish own transportation to and from job sites or staging areas. Must be able to read, write, and understand English. Must be a minimum of eighteen (18) years of age. Must not use illegal drugs or excessive alcohol and must consent to a drug and alcohol test when required. Must be able to comply with safety standards. Must have own hand tools. Workers should be able to: rate information using personal judgment or standards that can be measured or checked; work within precise limits or standards of accuracy; perform a variety of duties, which may change often; use reason and logic; perform arithmetical operations rapidly and accurately; see details in objects or drawings; recognize slight differences in shapes or shadings; and picture flat objects as 3-dimensional objects. Physically, workers must be able to: work easily and skillfully with hands; climb and maintain balance on ladders, scaffolds, and vessels; see well (naturally or with correction) and distinguish colors; reach for, handle, and grasp wires, conduit, and hand tools; bend, crouch, and work in small places; and lift and carry objects related to performing the job task. A valid Texas driver's license is preferred but will accept a State or Government issued Identification card. A valid Texas Electrical Apprentice License is required. Osha 10 a plus but not required. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer, Disabled/Veteran #rab #LI-KC1 Notice to prospective employees: There have been fraudulent postings and emails regarding job openings with EMCOR Group and its companies. Please check our available positions to confirm that a post or email is genuine.EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

**About Us** A Fortune 500 company, EMCOR Group, Inc. (NYSE: EME) is a leader in mechanical and electrical construction, industrial and energy infrastructure, and building services. EMCOR companies plan, install, operate, maintain, and protect the sophisticated and dynamic systems that create facility environments-such as electrical, mechanical, lighting, air conditioning, heating, security, fire protection, and power generation systems-in virtually every sector of the economy and for a diverse range of businesses, organizations, and government. **Job Summary** Rabalais I&E Constructors 11200 Up River Road Corpus Christi, Texas 78410 Rabalais I&E Constructors is currently seeking Commercial Journeyman Electricians for the Port Isabel area. Commercial experience is preferred, and a state license is required. **Essential Duties & Responsibilities** **About Us:** Since 1984, Rabalais Instrument & Electrical Constructors has been meeting and exceeding client expectations on projects ranging from industrial and commercial electrical, instrumentation, and control services to installation, repair, and maintenance services for residential, commercial, and industrial facilities. With an experienced, highly skilled staff, cutting edge technology, and a passion for safety and quality, Rabalais provides top-quality services in a timely and cost-effective manner. In fact, Rabalais has built a reputation as one of the most reliable and respected electrical and instrumentation contractors in the nation. The management team at Rabalais brings a combined experience of over 500 years to each project the company undertakes. **Job Description** : Assists electrician to install and repair electrical wiring, fixtures, and equipment. Measures, cuts, and bends wires and conduit using ruler and hand tools. Drills holes for wiring using power drill and pulls or pushes wiring through opening. Assists in lifting, positioning, and fastening objects, such as wiring, conduit, and motors. Performs minor repairs, such as replacing fuses, light sockets, bulbs, and switches using hand tools. Maintains tools and equipment and keeps supplies and parts in order. Disassembles defective electrical equipment, such as motors using hand tools. Load, transport, unload, and furnish Electrician with materials, tools, equipment, and supplies. Clean work area and restock supplies and materials as necessary. May erect scaffolding. May assist in lifting, positioning, and securing of materials during installation. Perform other routine duties as directed by experienced craft person. **Job Performance Requirements:** Must be able to furnish own transportation to and from job sites or staging areas. Must be able to read, write, and understand English. Must be a minimum of eighteen (18) years of age. Must not use illegal drugs or excessive alcohol and must consent to a drug and alcohol test when required. Must be able to comply with safety standards. Must have own hand tools. Workers should be able to: rate information using personal judgment or standards that can be measured or checked; work within precise limits or standards of accuracy; perform a variety of duties, which may change often; use reason and logic; perform arithmetical operations rapidly and accurately; see details in objects or drawings; recognize slight differences in shapes or shadings; and picture flat objects as 3-dimensional objects. Physically, workers must be able to: work easily and skillfully with hands; climb and maintain balance on ladders, scaffolds, and vessels; see well (naturally or with correction) and distinguish colors; reach for, handle, and grasp wires, conduit, and hand tools; bend, crouch, and work in small places; and lift and carry objects related to performing the job task. A valid Texas driver's license is preferred but will accept a State or Government issued Identification card. A valid Texas Electrical Apprentice License is required. Osha 10 a plus but not required. **We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer, Disabled/Veteran** **\#rab** **\#LI-KC1** **Notice to prospective employees:** **There have been fraudulent postings and emails regarding job openings with EMCOR Group and its companies. Please check our available positions to confirm that a post or email is genuine.** **EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.** **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Affirmative Action Policy** Please review our Affirmative Action Policy (*************************************************************************************************************** . **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-TX-Brownsville | US-TX-Corpus Christi_ **ID** _2025-4989_ **Company** _EMCOR Group, Inc._ **Category** _Operations Services_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _3 months ago_ _(10/21/2025 10:19 AM)_ **Licenses & Certifications** _Electrical Journeyman License_

PLEASE UPLOAD TEXAS DRIVER LICENSE A valid Texas Driver's License and an acceptable driving record. Over 6 months related experience. PREFERRED: High School Diploma or General Equivalency Diploma (GED) required, in English; DUTIES AND RESPONSIBILITES: Assists with inspection of structure to ascertain obstructions to be voided to prevent weakening of structure resulting form installation of pipe. Assists in locating and marking position of pipe and pipe connections and passage holes for pipes in walls and floors. Assists with cutting openings in walls and floors to accommodate pipe and pipe fittings. Assists with cutting and threading pipes. Assists in joining pipes by use of screws, bolts, fittings, solder, plastic solvent, and caulk joints. Assists in filling pipe systems with water or air and reads pressure gauges to determine whether system is leaking. Assists in installation and repair of plumbing fixtures such as sinks, commodes, water heaters, hot water tanks, and water softeners. Performs maintenance, plumbing and repair work assigned while maintaining a high standard of safety cleanliness, and efficiency. Drives District vehicles to and from work site; obeys all traffic laws. Follows established safety procedures and techniques to perform job duties. Maintains confidentiality. Maintains a high level of ethical behavior as is expected of all District employees. Maintains professional growth by attending in-service and meetings as requested/required. Performs any other duties as assigned by the Supervisor/Director.

Plumber's Helper Reports to: Lead Plumber Department: Maintenance Pay Grade M 4 @ 260 days Funding Source: Qualifications Primary Purpose: To become a worthy employee of the district by safely and adequately performing duties associated with operation, maintenance repair, or installation of plumbing systems, fixtures, apparatus and equipment. Education/Certification: Eighth grade education or higher Must have a valid Texas Driver's License Special Knowledge/Skills: Able to read, write, speak, and understand the English language Must have enough command of the English language to effectively make oral and/or written presentations on activities related to his/her job responsibility Be able to communicate using modern communication technology (telephone, two-way radio, etc. Proficient skills in operating and maintaining equipment and tools needed to perform jobs as listed in the . Basic computer skills in the operation of personal computers or display terminals Basic knowledge of building repair and maintenance procedures Basic skills in human relations Experience: Post High School vocational training One or more years of outstanding performance, while working for P-SJ-A ISD At least two year's of outstanding performance while working for a reputable company which specializes or is closely related to the job responsibilities as listed in the job description Such alternatives to the above qualifications as the Board of Trustees may find appropriate and acceptable PSJA Leadership Skills and Expectations In PSJA ISD, we hire individuals who are expected to embody the Spirit of PSJA and demonstrate these characteristics as they lead others. Positive Engagement Welcomes staff, students, parents, and community as honored members at the district table Builds relationships - Builds positive, trusting relationships through frequent interactions which demonstrate care and interest in well-being of all stakeholders Exhibits professionalism- Exhibits awareness and reflection to manage emotions and engage in continuous personal growth Models ethics - Exemplifies the values and priorities of the district through consistent actions and service to stakeholders Communicates effectively- Maintains open lines of two-way communication with staff, students, parents, and community to receive input and provide information for engagement with district vision Student-centered Excellence Holds vision and expectations for success for all students and all staff Demonstrates expertise - Possesses up-to-date knowledge and skills to perform organizational role at a high level of competence Establishes shared vision - Articulates the school's mission to the community and solicits support in making that mission become a reality Implements plans- Works with all stakeholders to implement vision by establishing goal, monitoring progress, and providing resources Expects results - Pursues exceptional results for all students by holding self and others accountable and driving for continuous improvement Joint Empowerment Develops and empowers individuals and teams for effective action Promotes collaboration - Designs organizational structures to promote collaboration and teamwork for distributed leadership throughout the district Inspires Action - Motivates others to take responsible risks and perform at their highest level to support district vision and goals Builds capacity - Provides opportunities for growth to ensure all staff build capacity to support district goals Develops leaders - Identifies, develops, and places future leaders through rigorous processes and strategic leadership assignments Adaptive Innovation Maintains district at the forefront of educational service providers Scans Environment - Analyzes and applies understanding of internal organization and external environment to assess and respond to the district's future advancement Manages change - Demonstrates courage, initiative, and perseverance in bringing about meaningful change to support the shared vision Champions solutions - Challenges the status quo by collaboratively exploring new and better ways of doing things Acknowledges outcomes - Creates a positive environment for growth by celebrating success and learning from failure Technical Skills, Responsibilities and Duties In PSJA ISD, we hire individuals who demonstrate excellence in these technical areas as they lead others Major Responsibilities and Duties: Locates and marks position of pipe and pipe connections and passage holes for pipes in walls and floors, using ruler, spirit level, and plumb bob. Tests piping system for leaks by increasing pressure in pipes and observing gages attached to pipes for indication of leaks. Inspects gas lines, makes repair as needed, and makes arrangements for city inspectors to test the lines. Acquires a signed certificate of approval for gas lines and turns in approved certificate to Maintenance Office. Plans new or modified installations to minimize waste of material, to provide access for future maintenance, and to avoid unsightly, hazardous, and unreliable plumbing systems. Cuts and bends pipe to correct length and shape by use of pipe-bending machine or by placing piper over block and bending by hand. Cuts and threads pipe by use of pipe cutters, cutting torch, and pipe pipe-reading machine. Joins tubing or pipes by means of sleeves, couplings, or unions, and solders joints using torch. Fills pipe systems with water or air and reading pressure gages to determine whether system is leaking. Installs and repairs plumbing fixtures, such as sinks, commodes, bathtubs, water heaters, hot water heaters, hot water tanks, garbage disposal units, dishwashers, and water softeners. Repairs and maintains plumbing, by replacing washers in leaky faucets, mending burst pipes, and opening clogged drains. Installs expansion and discharge valves. Installs water filters. Tests joints and connections for gas leaks using gas detector or soap-and-water solution. Performs other duties and responsibilities assigned by the supervisor. Mental Demands/Physical Demands/Environmental Factors: Tools/Equipment Used: Plumbing tools and equipment including pipe bender, propane torch; hand tools; power tools; heavy equipment including forklift, trencher, backhoe; light truck or van Posture: Frequent standing, kneeling/squatting, bending/stooping, pushing/pulling, and twisting; work in tiring and uncomfortable positions Motion: Frequent walking, climbing stairs/ladders/scaffolding, grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent driving Lifting: Heavy lifting and carrying (45 pounds and over) on a daily basis Environment: Work outside and inside, on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures, dust, toxic chemicals and fumes, noise, vibration, and electrical hazards; work around gas lines; work around machinery with moving parts; may work in tight or enclosed spaces; may work alone; regularly work irregular hours; occasional prolonged hours; frequent districtwide travel Mental Demands: Maintain emotional control under stress This document describes the general purpose and responsibilities assigned to this job and is not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

MEMCO Staffing is currently seeking a reliable Plumber Assistant to support experienced plumbers on maintenance and service projects. This role is ideal for someone looking to gain hands-on experience in the plumbing trade while working in a fast-paced environment. Responsibilities Assist licensed plumbers with plumbing repairs, installations, and maintenance Carry tools, materials, and equipment to job sites Help with basic plumbing tasks such as replacing fixtures, clearing drains, and repairing minor leaks Maintain a clean and safe work area Follow all safety guidelines and job site procedures Perform additional maintenance or labor duties as assigned Requirements Previous plumbing or maintenance experience preferred (not required) Ability to lift up to 50 lbs and perform physical labor Must be dependable, punctual, and safety-focused Ability to take direction and work as part of a team Valid ID and ability to pass pre-employment screening

Maintenance & Operations Department/Plumber Date Available: 09/02/2022 REPORTS TO: Plumber Foreman DATE REVISED: Sept 18 2015 LENGTH OF WORK YEAR: 261 days PAY GRADE: Hourly WAGE/HOUR STATUS: Non-Exempt SALARY RANGE: $19.20 Min $27.35 Max PRIMARY PURPOSE: The Plumber is responsible for the operation and maintenance of all plumbing systems as assigned. QUALIFICATIONS: High School Graduate or GED required Journeyman's license required; may be substituted for irrigation license and or 5 years plumbing experience Master license preferred Able to read blueprints and schematics Must have and maintain a valid driver's license and be insurable MAJOR RESPONSIBILITIES: • Maintain all plumbing systems in good working condition. • Performs services needed for plumbing such as repairing water leaks, repairing or replacing pipes. equipment, or fixtures. • Makes minor installations as directed by supervisor. • Maintains heating equipment in compliance with all Federal-Slate Commission and Insurance requirements. • Performs irrigation duties as assigned by supervisor. • Perfoms all duties in a safe manner to avoid injury to oneself and/or to others. • Performs other related duties as assigned. EQUIPMFNT USED: • Districit vehicle, two-way radio, baekhoe, trenching machine, rooter rotor, electric hand tools, and soldering torch . WORKING CONDITIONS: Mental Demands/Physical Demands/Environment Factors: • Frequent district travel, strenuous bending, climbing, and walking, working in extreme weather conditions, working on slippery uneven surfaces, and exposure to toxic fumes and chemicals The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required Nondiscrimination StatementEdinburg CISD does not discriminate on the basis of race, color, national origin, sex, disability or age in its programs or activities and provides equal access to the Boy Scouts and other designated youth groups. The following person has been designated to handle inquiries regarding the nondiscrimination policies: Title IX issues: Mark Micallef, *******************, Director of Personnel/Legal Issues, ADA/504 issues: Sofia Hinojosa, *********************** , Director of Student & Social Services, 411 N. 8thAvenue, Edinburg, TX 78539, **************. Edinburg CISD no discrimina por motivos de raza, color, origen nacional, sexo, discapacidad o edad en sus programas o actividades y brinda igualdad de acceso a los Boy Scouts y otros grupos juveniles designados. La siguiente persona ha sido designada para manejar consultas sobre las políticas de no discriminación: Title IX issues: Mark Micallef, *******************, Director of Personnel/Legal Issues, ADA/504 issues: Sofia Hinojosa, *********************** , Director of Student & Social Services, 411 N. 8th Avenue, Edinburg, TX 78539, **************.

Description:Construction Craftsman Job Description ** Construction Craftsman **Department:** Rigging / Construction **Employment Type:** Full-time Job Summary The Construction Craftsman is responsible for preparing, setting, aligning, and securing heavy equipment and machinery on job sites. This role includes inspecting and selecting rigging gear, following OSHA safety standards, and coordinating with crane operators and construction teams. The ideal candidate must demonstrate attention to detail, a commitment to safety, and the ability to work at heights and in confined spaces under varying conditions. Responsibilities & Duties Complete and discuss a thorough Job Safety Analysis (JSA) prior to each task. Maintain a positive attitude towards both internal and external customer service. Inspect and prepare loads that need to be moved. Set, align, and level heavy equipment and machinery. Select and prepare the appropriate rigging gear including beams, pulleys, clamps, and bolts. Ensure compliance with state and company safety procedures. Communicate effectively with the rigging and construction team. Break down rigging equipment and conduct post-rigging inspections. Assist equipment operators as needed. Properly torque and rig equipment and machinery. Direct crane operators on proper equipment placement. Test installed machinery and make necessary adjustments or repairs. Perform hot bolt and torque procedures as required. Observe and comply with all safety and project-specific rules. Perform other duties as assigned. Qualifications and Requirements Preferably 3-6 months of experience in rigging operations. Preferably 1 year of experience in steel erection or structural fabrication. Familiarity with OSHA safety standards is required. In-depth knowledge of rigging equipment and heavy machinery. Must be able to meet all physical requirements of the job. Must have all required tools. Expected to climb and work at heights and in confined spaces (up to or exceeding 200 feet). Able to work outdoors in all weather conditions. Available to work overtime, nights, and weekends as required by project needs. HSE Responsibilities Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” - Vision & Mission Statement as fundamental core values. Demonstrate implementation of proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture. Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, best practices, and client-specific site policies. Make a personal commitment and be accountable for HSE results, supporting team members through coaching and mentoring to achieve goals. Accept coaching and demonstrate ownership and improvement of HSE processes based on feedback and ongoing mentorship. Requirements:

Facility Solutions Group is dedicated to timeless contribution and service in lighting, electrical, energy, and technology fields. Our mission is to consistently provide our customers with superior value through quality products, service and support by contributing to the quality of life of all employees. As one of the nation's largest single-source providers of lighting and electrical products, electrical services, electrical construction, and energy management solutions Facility Solutions Group is expanding their staff and seeking a Journeyman Electrician to join our FSG - Harlingen team. As a Journeyman Electrician, you will plan layouts, install and repair wiring, electrical fixtures, apparatus, and control equipment for commercial lighting. The ideal candidate will have experience in commercial lighting and electrical maintenance, as well as promote the core values of FSG through excellent customer service and assuring the safety of all work. A Journeyman Electrician will: Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications, safety codes and local electrical codes. Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes. Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels; installs Buss, Busbar, electrical feeders, power systems and/or switchgear. Repairs faulty equipment or systems. Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures. Advise management on whether continued operation of equipment could be hazardous. Meets attendance standards and complies with late/absence notification procedures. Maintain current electrician's license or identification card to meet governmental regulations. Qualifications The ideal candidate will satisfy the following requirements and qualifications: High School Diploma or General Education Degree MUST have current State Issued Journeyman Electrician's License Must possess valid driver's license Ability to multitask while staying organized Strong verbal and written communications skills Positive customer service skills Experience in lighting a plus! WHAT WE OFFER: Consistent and steady work Full Benefits after 60 days including health, Life, dental and vision 401k Matching form First day! 22 days PTO , rolls over and has cash out options Paid Weekly FSG is an EEO/Affirmative Action Employer: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status. * HARLINGEN *

**Requisition ID: 178510** Lay-out, assemble, install, or maintain pipe systems, pipe supports or related hydraulic or pneumatic equipment in accordance with all applicable plans, specifications, codes and industry standards. **Experience Level** Intermediate **Primary Responsibilities and Duties** - Reading isometric drawings, taking measurements, fabricating and installing piping efficiently - Align, bolt, and clamp together components of fabricated metal products to secure in position for welding - Assemble and secure pipes, tubes, fittings, and related equipment according to specifications by welding and threading joints - Position and secure materials and workpieces during installation; and install all other items in accordance with the applicable plans and specifications - Distinguish varying thickness and types of metal materials - Manually handle and securely apply rigging equipment - Operate tools and equipment including: beveling machines, cut-off grinders, hammers, torches, magnetic drills, and a Saw-Zall - Layout and install equipment, vessels, skids, pumps, pipe, and supports - Hydro test piping systems **Qualifications** - Experience as a Pipefitter Craftsman in a powerplant/industrial setting is required. - Must possess working knowledge skills and abilities for position. - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. - Ability to use hand tools, power tools and layout tools safe and efficiently. **Requirements** - The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl - Constantly works in a construction environment and will be exposed to changing outdoor weather conditions - Work irregular hours, weekends, overtime and holidays as required - May be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffolds - Move and work in and around confined and cluttered places, and uneven surfaces - Must be able to complete tasks in a noisy and dusty environment - May be required/able to move items weighing up to 50 pounds across construction/industrial site - Must have required tools - Must have experience with Heavy wall and large bore pipe. - Observe and comply with all safety and project rules, perform other duties as required - Ability to pass pre-access drug and alcohol testing, fit for duty medical and background check Equal Opportunity Employer, including disability and protected veteran status. Company: TIC_Craft

1. Communicates with Material Person craft and others to perform job tasks. 2. Inventories against purchase order to insure proper equipment and materials are received in satisfactory condition. 3. Stores, retrieves, loads and unloads all types of materials from storage bins, pallets and vehicles. 4. Works from ground or aerial devices. 5. Moves materials from warehouse and prepares for delivery to jobsite. 6. Pulls materials for jobsite requirements or material move request. 7. Stores equipment in designated areas and maintains appropriate records. 8. Keeps running log of all consumable items used and reorders as needed. 9. Retrieves and issues materials upon receipt of material request and maintains appropriate records of movements. 10. Maintains warehouse locations including main, remote, or tool room i.e. sweeping, painting, cleaning, etc. as required. 11. Adheres to all safety procedures. 12. Adhere to Bechtel Standard Work Processes and Procedures (SWPP's). 13. Participate in STARTT Card discussions on a daily basis. 14. Typically requires 6 months of industrial construction experience. **Auto req ID:** 24632BR **Project Name:** Rio Grande LNG **Location:** Brownsville, Texas **Shift:** Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

PLEASE UPLOAD TEXAS DRIVER LICENSE REQUIRED * A valid Texas Driver's License and an acceptable driving record. * Over 6 months related experience. PREFERRED: High School Diploma or General Equivalency Diploma (GED) required, in English; DUTIES AND RESPONSIBILITES: Assists with inspection of structure to ascertain obstructions to be voided to prevent weakening of structure resulting form installation of pipe. Assists in locating and marking position of pipe and pipe connections and passage holes for pipes in walls and floors. Assists with cutting openings in walls and floors to accommodate pipe and pipe fittings. Assists with cutting and threading pipes. Assists in joining pipes by use of screws, bolts, fittings, solder, plastic solvent, and caulk joints. Assists in filling pipe systems with water or air and reads pressure gauges to determine whether system is leaking. Assists in installation and repair of plumbing fixtures such as sinks, commodes, water heaters, hot water tanks, and water softeners. Performs maintenance, plumbing and repair work assigned while maintaining a high standard of safety cleanliness, and efficiency. Drives District vehicles to and from work site; obeys all traffic laws. Follows established safety procedures and techniques to perform job duties. Maintains confidentiality. Maintains a high level of ethical behavior as is expected of all District employees. Maintains professional growth by attending in-service and meetings as requested/required. Performs any other duties as assigned by the Supervisor/Director.

Reports to: Lead Plumber Department: Maintenance Pay Grade M 4 @ 260 days Funding Source: Qualifications Primary Purpose: To become a worthy employee of the district by safely and adequately performing duties associated with operation, maintenance repair, or installation of plumbing systems, fixtures, apparatus and equipment. Education/Certification: Eighth grade education or higher Must have a valid Texas Driver's License Special Knowledge/Skills: Able to read, write, speak, and understand the English language Must have enough command of the English language to effectively make oral and/or written presentations on activities related to his/her job responsibility Be able to communicate using modern communication technology (telephone, two-way radio, etc. Proficient skills in operating and maintaining equipment and tools needed to perform jobs as listed in the . Basic computer skills in the operation of personal computers or display terminals Basic knowledge of building repair and maintenance procedures Basic skills in human relations Experience: Post High School vocational training One or more years of outstanding performance, while working for P-SJ-A ISD At least two year's of outstanding performance while working for a reputable company which specializes or is closely related to the job responsibilities as listed in the job description Such alternatives to the above qualifications as the Board of Trustees may find appropriate and acceptable PSJA Leadership Skills and Expectations In PSJA ISD, we hire individuals who are expected to embody the Spirit of PSJA and demonstrate these characteristics as they lead others. Positive Engagement Welcomes staff, students, parents, and community as honored members at the district table Builds relationships - Builds positive, trusting relationships through frequent interactions which demonstrate care and interest in well-being of all stakeholders Exhibits professionalism- Exhibits awareness and reflection to manage emotions and engage in continuous personal growth Models ethics - Exemplifies the values and priorities of the district through consistent actions and service to stakeholders Communicates effectively- Maintains open lines of two-way communication with staff, students, parents, and community to receive input and provide information for engagement with district vision Student-centered Excellence Holds vision and expectations for success for all students and all staff Demonstrates expertise - Possesses up-to-date knowledge and skills to perform organizational role at a high level of competence Establishes shared vision - Articulates the school's mission to the community and solicits support in making that mission become a reality Implements plans- Works with all stakeholders to implement vision by establishing goal, monitoring progress, and providing resources Expects results - Pursues exceptional results for all students by holding self and others accountable and driving for continuous improvement Joint Empowerment Develops and empowers individuals and teams for effective action Promotes collaboration - Designs organizational structures to promote collaboration and teamwork for distributed leadership throughout the district Inspires Action - Motivates others to take responsible risks and perform at their highest level to support district vision and goals Builds capacity - Provides opportunities for growth to ensure all staff build capacity to support district goals Develops leaders - Identifies, develops, and places future leaders through rigorous processes and strategic leadership assignments Adaptive Innovation Maintains district at the forefront of educational service providers Scans Environment - Analyzes and applies understanding of internal organization and external environment to assess and respond to the district's future advancement Manages change - Demonstrates courage, initiative, and perseverance in bringing about meaningful change to support the shared vision Champions solutions - Challenges the status quo by collaboratively exploring new and better ways of doing things Acknowledges outcomes - Creates a positive environment for growth by celebrating success and learning from failure Technical Skills, Responsibilities and Duties In PSJA ISD, we hire individuals who demonstrate excellence in these technical areas as they lead others Major Responsibilities and Duties: * Locates and marks position of pipe and pipe connections and passage holes for pipes in walls and floors, using ruler, spirit level, and plumb bob. * Tests piping system for leaks by increasing pressure in pipes and observing gages attached to pipes for indication of leaks. * Inspects gas lines, makes repair as needed, and makes arrangements for city inspectors to test the lines. Acquires a signed certificate of approval for gas lines and turns in approved certificate to Maintenance Office. * Plans new or modified installations to minimize waste of material, to provide access for future maintenance, and to avoid unsightly, hazardous, and unreliable plumbing systems. * Cuts and bends pipe to correct length and shape by use of pipe-bending machine or by placing piper over block and bending by hand. * Cuts and threads pipe by use of pipe cutters, cutting torch, and pipe pipe-reading machine. * Joins tubing or pipes by means of sleeves, couplings, or unions, and solders joints using torch. * Fills pipe systems with water or air and reading pressure gages to determine whether system is leaking. * Installs and repairs plumbing fixtures, such as sinks, commodes, bathtubs, water heaters, hot water heaters, hot water tanks, garbage disposal units, dishwashers, and water softeners. * Repairs and maintains plumbing, by replacing washers in leaky faucets, mending burst pipes, and opening clogged drains. * Installs expansion and discharge valves. * Installs water filters. * Tests joints and connections for gas leaks using gas detector or soap-and-water solution. * Performs other duties and responsibilities assigned by the supervisor. Mental Demands/Physical Demands/Environmental Factors: Tools/Equipment Used: Plumbing tools and equipment including pipe bender, propane torch; hand tools; power tools; heavy equipment including forklift, trencher, backhoe; light truck or van Posture: Frequent standing, kneeling/squatting, bending/stooping, pushing/pulling, and twisting; work in tiring and uncomfortable positions Motion: Frequent walking, climbing stairs/ladders/scaffolding, grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent driving Lifting: Heavy lifting and carrying (45 pounds and over) on a daily basis Environment: Work outside and inside, on slippery or uneven walking surfaces; frequent exposure to extreme hot and cold temperatures, dust, toxic chemicals and fumes, noise, vibration, and electrical hazards; work around gas lines; work around machinery with moving parts; may work in tight or enclosed spaces; may work alone; regularly work irregular hours; occasional prolonged hours; frequent districtwide travel Mental Demands: Maintain emotional control under stress This document describes the general purpose and responsibilities assigned to this job and is not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

Pre-Testing Event!!!!! Labor One Marine & Industrial Services will be conducting a PRE-TESTING Event for Structural Fitters and Pipe Fitters for multiple projects! Sign up today! Where: 12 Sam Perl Blvd. Brownsville, TX 78520 956-621-5398 - Mr. Galvan When: Every Thursday Time: 8AM 2 PM Project Locations: Texas Florida Requirements: Fill out a Testing Application in person Bring a valid ID Testing Day - Must bring proper PPE and Tools Required PPE- Hard Hat Welding hood w/flip lens that connects to hard hat Welding gloves Clear Safety glasses Hearing protection Required Tools Structural Fitter - 25' tape measure Striker Tri-Square or speed square Burning Glasses Pipe Fitter- 25' tape measure 2' Level 8” or 12” crescent wrench Striker Small ball peen hammer 24” framing square

**Requisition ID: 177419** Construct and repair structural woodwork and equipment in the yards, industrial and commercial property. **Experience Level** Skilled - Construct and repair structural wood work and equipment in the yard, industrial and commercial property - Work with materials such as wood, plastic, fiberglass, or drywall. - Utilize chisels, planes, saws, drills, and sanders to repair and erect structures. - Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity. - Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed. **Qualifications** - Experience as a Carpenter Journyeman in a powerplant/industrial setting is required. - Must possess working knowledge skills and abilities for position. - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. - Ability to use hand tools, power tools and layout tools safe and efficiently. **Requirements** - The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl - Constantly works in a construction environment and will be exposed to changing outdoor weather conditions - Work irregular hours, weekends, overtime and holidays as required - May be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffolds - Move and work in and around confined and cluttered places, and uneven surfaces - Must be able to complete tasks in a noisy and dusty environment - May be required/able to move items weighing up to 50 pounds across construction/industrial site - Must have required tools - Observe and comply with all safety and project rules, perform other duties as required - Ability to pass pre-access drug and alcohol testing, fit for duty medical and background check Equal Opportunity Employer, including disability and protected veteran status. Company: TIC_Craft