Journeyman electrician jobs in Auburn, WA - 129 jobs

GFT is seeking a Field Electrician - Power System Assessments to join our Building and Places Team in Fife, WA! This role follows a hybrid work model, requiring regular attendance at our office and frequent local travel (up to 50 miles), with occasional travel to project sites across the U.S. A company vehicle/fuel reimbursement and full travel reimbursement are provided. At GFT, we're not just engineering the future; we're meticulously building it. Our comprehensive suite of construction and program management services reflects our unwavering commitment to excellence, safety, innovation, and sustainability. Our construction management services are the cornerstone of our commitment to transforming communities and enhancing lives. We oversee every construction phase to help ensure projects are completed on schedule, within budget, and to the highest safety and quality standards. What you'll be challenged to do: In this role, you'll support electrical system design and condition assessment projects for a wide range of facilities, including public, commercial, industrial, and institutional buildings. You'll play a critical part in documenting existing system conditions, supporting electrical system studies, and ensuring that our design teams have the information needed to engineer safe and efficient power distribution systems. In this capacity, the successful candidate will be responsible for the following: Perform field inspection of energized electrical equipment including panelboards, disconnects, MCCs, vaults, and transformers, generally operating at low voltage (≤480V), with occasional work involving medium-voltage systems (5 kV-15 kV) such as transformers, junction vaults, switches, and switchgear. Install and remove load monitoring equipment (current transformers, data loggers, etc.) for NEC 220.87 load studies. Collect and record electrical system data for coordination, short-circuit, and arc-flash studies. Prepare field reports, photos, and one-line markups documenting existing conditions. Review electrical drawings for constructability and assist with QA/QC. Follow NFPA 70E and LOTO safety procedures at all times. Report directly to the Project Manager and collaborate with electrical engineers and designers. Travel within the region and occasionally to out-of-state projects. What you will bring to our firm: Active Washington State EL01 Journeyman Electrician License Minimum 5+ years of experience as a journey-level electrician Experience with public, commercial, industrial, and institutional facilities preferred Strong understanding of the National Electrical Code (NEC) and NFPA 70E safety practices Ability to interpret electrical plans, one-lines, and panel schedules Excellent written and verbal communication skills, including report preparation Valid driver's license and clean driving record Proficiency in the Microsoft Office Suite (Excel, Word, Outlook) Compensation: The salary range for this role is $90,000 - $120,000. Salary is dependent upon experience and geographic location. Featured Benefits: • Comprehensive benefits package including wellness programs, parental leave, and pet insurance, in addition to medical, dental, vision, disability, and life insurance.• Tax-deferred 401(k) savings plan.• Competitive paid-time-off (PTO) accrual.• Tuition reimbursement for continued education.• Commitment to professional development, access to internal and external training programs, and support of active participation in professional organizations• Incentive compensation for eligible positions. At GFT, a privately held AEC firm, we innovate where transportation, water, power, and buildings converge. We call this the Infrastructure of Life. We measure our success by the strength of our relationships - that's why we're the employer of choice for 5,000+ of the industry's brightest engineers, planners, architects, inspectors, designers, and more. Our clients choose us for our expertise and prefer us for our nimble approach, creativity, and personal touch. Backed by over a century's experience, together we're building a lasting legacy for future generations: stronger communities, a healthier planet, and better lives. GFT: Ingenuity That Shapes Lives™ is an Equal Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veterans' status or other characteristics protected by law. Unsolicited resumes from third party agencies will be considered the property GFT. Location: Fife, WA Core Business Hours: 8:00 AM - 5:00 PM Employment Status: Full-Time Salary Range: $90,000-$120,000 GFT does require the successful completion of a criminal background check for all advertised positions. Unsolicited resumes from third party agencies will be considered the property GFT. #LI-FS1

LOCALLY OWNED AND OPERATED COMPANY! COMPANY EVENTS, GREAT FLEET, HIGHEST PAY IN THE INDUSTRY, SUPPORT FROM 170 OTHER TEAM MEMBERS, BRAND NEW TRUCKS; STOCKED AND READY TO ROLL. About Us Greenwood Heating and Home Services is now offering Plumbing services for our customer base. We have been in business since 1918 and have a stable and loyal customer base. Our team is over 170 strong individuals who collectively make us the most premier home service team in Western Washington. We strive to be the most respected and professional team and provide the best customer service possible for our clients. We hire team members based on our Core Values of Pride, Professionalism, Communication, Safety, and Integrity, and once you are on board, we have a successful track record of providing quality on the job training that will get you all the knowledge and skills you need to be successful in this trade, regardless of position. We are a growing team, and are always looking for opportunities for our team to grow as individuals in their career and their personal and financial lives. Join our team and meet many knowledgeable, friendly, and supportive people who see your success as a success of their own. Electrician As an equal opportunity employer, candidates will receive consideration without discrimination against race, creed, color, sex, national origin, handicap status, or veteran status. Job Summary: Are you a service electrician who is looking to further your career as part of the best home service company in Western Washington? Greenwood Heating and Home Services is looking for the best of the best to join our crew! We are looking for great people with high level of Integrity and Professionalism to join our team. Our team is energetic, hungry to learn, and customer oriented. If you are looking for a new opportunity to join a family run organization with high employee retention that likes to work hard and have great time look no further. Positions available: Journeyman Electrician (02 License preferred, not required) Wage / Hours: This position is a full-time, non-exempt position. Pay is hourly plus commission (Details about pay to be discussed in interview. Our business hours are 7am-6pm. Our schedules vary based on workload. Working hours may exceed 8 hours a day and may exceed 40 hours per week during busier times of the year. Weekend on call is mandatory for service electricians, rotational basis. Location: This position is performed on the road in the greater Seattle area. Our service range is: North: Everett Area, South: Federal Way Area, East: North Bend. We have two locations, one in Everett and one in Tukwila. Roles is available for both locations. Job Duties / Responsibilities: Gather information and data about equipment being installed, noting levels and readings of different components on equipment to ensure proper operation. Work with office staff to pick up correct material and equipment from one of our shops to match what was purchased by customer. Install and service residential electrical services in customers home. Engage in client discussions professionally and politely to uncover their needs and works with their team leaders to address issues if beyond knowledge base. Job Requirements / Skills: Understanding and follow through in Greenwoods Core Values and Mission Statement. Confident and professional communication skills via phone and face to face interaction with homeowners and team members. Experience with and able to navigate mobile devices (Apple products) with the ability to learn new software. Attention to detail when debriefing office or homeowner about your findings in the field. Service oriented and ability to interact with all customer service scenarios (positive and negative). Ability to empathize and work through challenging problem-solving situations. Education and Experience: High school diploma or equivalent preferred. Electrical experience required, and license preferred, 01 or 02 Physical Requirements: Must be able to lift 50 lbs. Must be able to be on your feet / knees for extended periods of time. Must be able to work in crawl spaces and attics for periods of time. -Must be able to work on ladders and drive a company vehicle.

Shift Industrial Electrician Are you a seasoned professional with hands-on experience in advanced electrical or electronic systems from your time as a Navy Nuclear Electrician Mate or Nuclear Electronics Mate? Take your expertise to the civilian world and join our dynamic client companies, where precision, leadership, and technical mastery are celebrated. We're seeking individuals who can bring their specialized knowledge and training to maintain and enhance cutting-edge systems. Key Responsibilities: Electrical Systems: Diagnose, maintain, and repair electrical systems, power generation equipment, and distribution networks. Electronics: Operate and troubleshoot advanced electronic controls, instrumentation, and automated systems. Preventative Maintenance: Conduct inspections and routine maintenance to ensure optimal system performance and reliability. Team Collaboration: Partner with multidisciplinary teams to solve complex problems, maintain safety standards, and improve system efficiency. Technical Expertise: Provide training and mentorship based on your advanced technical background. What We Offer: Total compensation 80-120K and an excellent benefits package. Opportunities to transition into leadership roles Access to state-of-the-art technology and ongoing professional development. A work culture that mirrors the dedication, discipline, and camaraderie of your Navy career. Qualifications: U.S. Navy experience as a Nuclear Electrician Mate or Nuclear Electronics Mate. Exceptional troubleshooting and technical problem-solving skills in electrical or electronic systems. Strong foundation in safety protocols and operational excellence. Ability to adapt to fast-paced environments while maintaining precision and accuracy.

Why should you be interested? Multiple openings are available at one of Seattle's most stable employers. Rainier Recruiting has partnered with a luxury yacht builder that builds custom vessels from 100-300 feet long. This company has hired multiple successful employees already from Rainier Recruiting who have reported that it is a very good company to work for. Passive candidates who are employed and curious to hear are more than welcome to have a “no-commitment” conversation with our Recruiting team about why this could be an exciting career opportunity. Compensation:?$25-40/hr (negotiable) Location:?Seattle, WA. Employees must be able to come onsite daily. What this company offer you: We are a caring, informal but professional group of professionals who enjoy what we do immensely. We acknowledge the contributions and talents of our team members by providing benefits that support you at work and in life: Generous pay commensurate with skills and experience Paid medical, dental, vision, and basic life insurance for full-time employees 401(k) retirement savings plan with company matching your contribution up to 4% Paid Time-Off (PTO) and nine paid holidays each year Perks: Launch Parties, Summer Happy Hour Parties, Food Trucks, etc Outstanding work/life balance! We work hard when we are here, but leave work at work! Beautiful 25-acre campus What you'll do: The Electrician is responsible for assembling, installing, testing, and repairing electrical systems and components on yachts in various stages of construction. Our Electricians run a lot of cable. You will help wire up the entire boat and all of its systems. Custom yachts can have 100+ unique systems that all need power and our Electricians run all of this cable. It is a mixture of residential, commercial and industrial electrical work. Performing electrical work as part of a team Assemble, install, test, and maintain electrical or electronic wiring, equipment, controls, appliances, fixtures, lighting, audio/visual, low voltage systems, etc. Able to read drawings, blueprints, technical data, schematics, etc. Creating and installing wireways and raceways in overheads, bulkheads, walls, and other areas of the boat Pulling cables and wiring thru wireways and raceways Tests, troubleshoots, repairs, and replaces damaged or non functioning items Providing temporary power and lighting to work areas Generally performing work in the cabinet shop, occasionally at heights, in small spaces, and on vessels Safe operation of equipment and tools including numerous hand, power and air tools, multimeter, scissor lifts, boom lifts, etc. Maintain a safe, clean, and organized work area and ensure that all tools, materials, and flammable chemicals are stored properly Other duties as assigned What you need to succeed: To succeed, you will be eager to grow and learn, have a great attitude, and be able to pay close attention to detail. 3+ years as an Electrician, working on various electrical systems. Any mixture of residential, commercial and industrial electrical work is acceptable. We are not a part of the WA LNI electrical program (01, 02, 06, etc) and we do not require licensing for our team. Stand/walk for 8+ hours per day Frequent use of stairs, ramps, ladders and stools Lift and carry up to 50 lbs on a regular basis Extended periods of overhead work Bend, kneel and crawl on a regular basis Frequent and repetitive arm and hand motions, handling, grasping, etc Frequent reaching below knees, knees to shoulders and above shoulders Wear necessary personal protection equipment including respiratory protection equipment, safety glasses/goggles, rubber gloves, coveralls, hearing protection, fall protection, etc. Clear vision (with or without corrective lenses) Hearing as needed to recognize alarms Who is Rainier Recruiting? Rainier Recruiting is a boutique, award winning national staffing agency and executive search firm. Using an approach that “treats every candidate like an executive search”, we offer positions in contract-to-hire, Full-Time, and executive search. Named the #1 Best Workplace in Washington State in 2022, recognized as a ClearlyRated Best of Staffing firm, and identified as a top recruitment firm by multiple business journals, Rainier Recruiting is fast becoming a respected company. We are no longer the “best recruiters you have never heard of”. Rainier Recruiting is also proud to share our clients have a 93% repeat business rate. Rainier Recruiting is an equal opportunity employer and service provider and does not discriminate on the basis of race, religion, gender, gender identity, national origin, citizenship status, sexual orientation, disability, political affiliation or belief, or any other protected class. We are committed to the principles of Equal Opportunity Employment and are dedicated to making employment decisions based on merit and value, for ourselves, our client companies, and for the candidates we represent. We engage in socially conscious business practices and believe that diverse, equitable, inclusive, and non-biased talent and recruitment processes are foundational to the success of every organization that we partner with.

> Employees Apply Here" onclick="window.location.href = '****************************** InternalUser=true&locale=en_US/';"/> Electrician - 90341615 - Seattle, WA Company: Amtrak Your success is a train ride away! As we move America's workforce toward the future, Amtrak connects businesses and communities across the country. We employ more than 20,000 diverse, energetic professionals in a variety of career fields throughout the United States. The safety of our passengers, our employees, the public and our operating environment is our priority, and the success of our railroad is due to our employees. Are you ready to join our team? Our values of 'Do the Right Thing, Excel Together and Put Customers First' are at the heart of what matters most to us, and our Core Capabilities, 'Building Trust, Accountability, Effective Communication, Customer Focus, and Proactive Safety & Security' are what every employee needs to know and do to be most impactful at Amtrak. By living the Amtrak values, focusing on our capabilities, and actively embracing and fostering diverse ideas, backgrounds, and perspectives, together we will honor our past and make Amtrak a company of the future. SUMMARY OF DUTIES: Responsible for inspection, testing and maintenance of electrical, electronic and HVAC systems on rolling stock equipment and components in accordance with FRA and Amtrak standards and guidelines. ESSENTIAL FUNCTIONS: * Performs inspection, testing and maintenance in accordance with 49CFR regulations and Amtrak standards and guidelines * Utilizes a variety of test equipment, PC, and graphic information to diagnose malfunctions, troubleshoot and qualify components and circuits to determine corrective actions and causes of equipment failures * Repairs and/or replaces doors, electronics, signs, pantographs, and HVAC systems * Installs components such as motors, generators, switches, relays, batteries, and transformers * Performs approved electrical modifications and repairs or replaces components, as necessary * Troubleshoots equipment to determine corrective actions and causes of equipment failures * Maintains proper care and use of materials, test equipment, machines and hand tools normally associated with assigned job * Works on electrical systems and components with AC and DC voltage MINIMUM QUALIFICATIONS: * HVAC experience * High School Diploma or GED * Ability to lift 50 lbs. * Experience in electrical repairs, and testing advanced electrical/electronic systems and reading, drafting, and interpreting circuit diagrams, schematics, and mechanical drawings * Experience in both A/C and D/C electrical systems * Must successfully complete training and attain/retain certifications applicable to assigned job * Knowledge of mechanical and electrical systems * Ability to troubleshoot using schematics and multimeters * Knowledge and skill in the use of electrical tools, equipment, and the measurements necessary to meet established standards * Some computer skills PREFERRED QUALIFICATIONS & WORK ENVIRONMENT: * Experience in the maintenance of railroad equipment * Completion of technical school or apprenticeship program COMMUNICATION AND INTERPERSONAL SKILLS: Must have excellent verbal and written communication skills The hourly rate is $41.62 (with opportunity for increases, as per the applicable collective bargaining agreement, after beginning employment). Amtrak offers a comprehensive benefit package that includes health, dental, and vision plans; wellness programs; flexible spending accounts; 401K retirement plan; life insurance; paid time off; reimbursement of education; Public Service Loan Forgiveness eligibility; Railroad Retirement sickness and retirement benefits; and rail pass privileges. Some benefits are subject to the collective bargaining agreement. Learn more about our benefits offerings here. You power our progress through your performance. We want your work at Amtrak to be more than a job. We want your career at Amtrak to be a fulfilling experience where you find challenging work, rewarding opportunities, respect among colleagues, and attractive compensation. Amtrak maintains a culture that values high performance and recognizes individual employee contributions. Amtrak is committed to a safe workplace free of drugs and alcohol. All Amtrak positions requires a pre-employment background check that includes prior employment verification, a criminal history check and a pre-employment drug screen. Candidates who test positive for marijuana will be disqualified, regardless of any state or local statute, ordinance, regulation, or other law that legalizes or decriminalizes the use or possession of marijuana, whether for medical, recreational, or other use. Amtrak's pre-employment drug testing program is administered in accordance with DOT regulations and applicable law. In accordance with DOT regulations (49 CFR § 40.25), Amtrak is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Amtrak to obtain these records, the individual will not be permitted to perform safety-sensitive functions. In accordance with federal law governing security checks of covered individuals for providers of public transportation (Title 6 U.S.C. §1143), Amtrak is required to screen applicants for any permanent or interim disqualifying criminal offenses. Note that any education requirement listed above may be deemed satisfied if you have an equivalent combination of education, training and experience. Amtrak is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race/color, to include traits historically associated with race, including but not limited to, hair texture and hairstyles such as braids, locks and twists, religion, sex (including pregnancy, childbirth and related conditions, such as lactation), national origin/ethnicity, age, disability (intellectual, mental and physical), veteran status, marital status, ancestry, sexual orientation, gender identity and gender expression, genetic information, citizenship or any other personal characteristics protected by law. > Employees Apply Here" onclick="window.location.href = '****************************** InternalUser=true&locale=en_US/';"/>

Serve Up to Three Customers Daily: Engage with customers to understand their needs, deliver excellent service, and provide solutions tailored to their home. Solution-Oriented Sales: Be dedicated to finding the best solutions for each customer, offering recommendations that encompass safety, efficiency, and long-term value. Expert Installation & Repair: Execute immediate, high-quality repairs and installations, ensuring each home improvement is completed professionally and up to code. Professional Representation: Serve as the face of As You Wish, upholding our standards of professionalism and excellence in every customer interaction. Collaboration: Maintain open communication with dispatch, management, parts, and installation teams to streamline each job. Ongoing Professional Development: Participate in training to continually refine your skills, maintain certifications, and provide customers with the latest in industry expertise. What We Offer $3000 Sign-on Bonus Competitive Pay: Competitive Pay $175k-250k annually Customer Review Incentives: Monthly bonuses for positive customer reviews that contribute to our reputation. Comprehensive Benefits Package: Health insurance with 75% employer-paid premium for employees, 50% for dependents. 401(k) matching Paid time off, including 6 holidays and two weeks of vacation. Supportive Resources: Uniforms, vehicle access, dispatch from home, gas card, and technology provided for success in the field. Requirements Active EL01 or EL02 license (Washington State) Strong communication skills and a commitment to representing As You Wish with professionalism. Salary Description $175k-250k a year

Labor One is hiring Journey-Level Marine Electricians for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 *Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have working knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. DUTIES AND RESPONSIBILITIES -Must comply with OSHA standards and the shipyards best safety practices. --Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Keep your work area clean and safe at all times, especially at the end of the shift. -Understand relevant work processes, operation of equipment, and complete tasks proficiently. -Use appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book in repairing electrical equipment and installing electrical equipment. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Work shifts and overtime as assigned. -Comply with the Company's “Non-Discrimination and Anti-Harassment ---Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. -Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels. 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions, tests and reports results on electrical equipment. 3. Test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values. 4. Inspect trip shafts, toggle linkages and all other mechanical parts to see that they operate freely without binding. 5. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring. 6. Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment. 7. Install new power and lighting circuits. 8. Must be familiar with all safety procedures pertaining to or where to obtain electrical procedures. Must be very knowledgeable of work/safety procedures and manual. 9. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. ---The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. -Appropriate --PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Must be able to comprehend instructions, drawings, and general correspondence. -Must be able to write comprehensive Condition Found Reports (CFR) describing problem found and recommended corrective action. -Must be able to effectively confer job related information one-on-one and in small group situations. Must understand Ohms law and be able to use and interpret electrical measuring devices. -Must be able to read and interpret composite blueprints, electrical diagrams, computer printouts, specifications, and Navy standards manual -Must possess a thorough understanding of equipment and work processes used in marine electrical repair and system installation. -Must be able to operate and care for Electric Shop equipment, portable power tools, and hand tools. -Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand US standard and metric system measurements. -Must have six (6) years of related electrical installation and repair experience. 2nd Shift 40 hours per week / OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Shift Industrial Electrician Are you a seasoned professional with hands-on experience in advanced electrical or electronic systems from your time as a Navy Nuclear Electrician Mate or Nuclear Electronics Mate? Take your expertise to the civilian world and join our dynamic client companies, where precision, leadership, and technical mastery are celebrated. We're seeking individuals who can bring their specialized knowledge and training to maintain and enhance cutting-edge systems. Key Responsibilities: Electrical Systems: Diagnose, maintain, and repair electrical systems, power generation equipment, and distribution networks. Electronics: Operate and troubleshoot advanced electronic controls, instrumentation, and automated systems. Preventative Maintenance: Conduct inspections and routine maintenance to ensure optimal system performance and reliability. Team Collaboration: Partner with multidisciplinary teams to solve complex problems, maintain safety standards, and improve system efficiency. Technical Expertise: Provide training and mentorship based on your advanced technical background. What We Offer: Total compensation 80-120K and an excellent benefits package. Opportunities to transition into leadership roles Access to state-of-the-art technology and ongoing professional development. A work culture that mirrors the dedication, discipline, and camaraderie of your Navy career. Qualifications: U.S. Navy experience as a Nuclear Electrician Mate or Nuclear Electronics Mate. Exceptional troubleshooting and technical problem-solving skills in electrical or electronic systems. Strong foundation in safety protocols and operational excellence. Ability to adapt to fast-paced environments while maintaining precision and accuracy.

Seatown is seeking a skilled and reliable Electrical Journeyman to join our growing team in Mukilteo, WA. This role involves performing high-quality electrical installations, maintenance, troubleshooting, and repairs. The ideal candidate takes pride in their workmanship, values safety, and provides excellent customer service. Responsibilities Install, maintain, and repair electrical systems Read and interpret blueprints, schematics, and electrical specifications Troubleshoot electrical issues and perform efficient, code-compliant repairs Ensure all work complies with NEC, local, and state electrical codes Communicate clearly with customers, team members, and supervisors Accurately document work performed and materials used Support apprentices and less experienced electricians when needed Qualifications Valid Washington State Electrical Journeyman License Minimum 3-5 years of hands-on electrical experience Strong knowledge of electrical systems, tools, and safety practices Benefits Accrued PTO at 1 hour for every 40 hours worked 40 hours of vacation at 3 years and 80 hours at 5 years 7 Paid Holidays Medical/Dental/Vision Health Savings Account 401k with company 100% company match up to 3% and 50% match up to 5% Prizes and giveaways Fully stocked break room Ongoing Training Onsite Gym !!!!!!!!!!! Working for a company that values the employees #SEAP Pay Range$80,000-$100,000 USD About Seatown: Seatown Electric Plumbing Heating and Air is proud to serve residents throughout Seattle and surrounding areas. We have a great reputation that keeps our customers coming back time and time again. We pride ourselves not only on providing great service for our customers, but our employees as well. We take care of all the employees like family. Everyone has room for growth, and everyone has a voice. Our company culture is something that any of our employees would say is like no other in Washington! We are an equal-opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Privacy Policy

Electricians perform installs, repairs and maintaining complex AC/DC electrical systems, including generators, motors, panels, and communication circuits, ensuring all work is performed to code and project specifications, in a safe and efficient manner. This role requires working knowledge of reading schematics, running conduit and cable, and using diagnostic tools to troubleshoot and ensure safe, code-compliant operation. 2nd class mechanics should have a strong aptitude and ability to understand and follow instructions, with strong communication skills for sharing information with the supervisor or lead mechanics. Duties & Responsibilities * Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and company safety policies. * Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to: * Company policies and procedures * Local, state, and federal regulations * ABS, NAVSEA Standard Items, and MSC GTRs * General Specifications for Overhaul of Ships * Remove, install, inspect, repair, replace, troubleshoot, and test electrical equipment with little or no guidance from the Supervisor or Lead Mechanic. * Working knowledge of interpreting electrical schematics and blueprints to plan and install electrical systems. * Install, maintain, and repair AC/DC generators, switchboards, distribution panels, lighting, and alarm circuits. * Lay out and install conduit, cables, and wiring in designated spaces, including overheads, bulkheads, and decks. * Connect, disconnect, and service motors, electrical panels, and associated equipment. * Troubleshoot, test, and repair electrical components, including controllers, communication systems, and distribution systems. * Replace or adjust components in motors and generators, such as brushes, bearings, and switches. * Construct and connect instrument panels and cable systems according to specifications. * Identify and install various cable types, ensuring correct placement and secure connections. * Use tools and instruments to perform electrical diagnostics (e.g., meggers, volt meters, amp meters, tachometers) * Perform routine and corrective maintenance on all shipboard or facility electrical systems. * Possess and maintain all necessary hand and power tools required to perform electrical work safely and effectively. * Communicate effectively with supervisors and team members to relay job status, material needs, or potential safety issues. * Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Experience Requirements * 2½ - 4 years of experience as an Electrician in a shipyard. Other Requirements * Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes. * Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols. * Regularly required to sit, reach, and use hands for handling or operating tools and equipment. * Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids). * Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads. * Must be able to pass Drug Screening, Work Ability Screening. * Must be able to obtain a Government facility security pass and badges at the various shipyards Técnico works at (e.g., MHI, BAE, NASSCO, HII). * Availability to work overtime, weekends, or travel to alternate worksites when project needs demand. * Perform other duties as assigned.

GENERAL SUMMARY: Performs electrical work on U.S. Navy shore facilities, waterborne vessels, surface ships and/or submarines. Tasks will be related to inspections, repairs, modernization and/or alterations. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. POSITION LOCATION: Bremerton, WA DUTIES AND RESPONSIBILITIES: Other duties may be assigned. Performs troubleshooting and/or testing of various electrical, systems, circuits, controls, instruments and equipment, onboard military shore facilities, Navy ships/vessels to include submarines and/or ship's components and documents test requirements. Conducts voltage and other electrical safety checks. Performs connections/hook-ups to panels, switches, and boxes. Assists with cleaning up work area (removing debris from work area). Employees may be required to travel for work to other locations REQUIREMENTS: 1+ years of experience in shipboard electrical installations; or completion of a formal related course of study through either a community college, technical or trade school, military training, formal company training program or an apprenticeship program. Basic experience with Voltmeters, Ammeters, Ohmmeters, Megohmmeters, (ET1 only) Light Loss meters, (ET1 only) Optical Time Delay Reflectometers (OTDRs); and general hand tools, such as screwdrivers, wire strippers, crimp tools, wrenches, knives, pliers, drills, and saws. Able to read and interpret blueprints, sketches, wiring diagrams, written technical instructions and manuals. Able to read and understand material safety data sheets (SDS). Perform basic troubleshooting and/or testing of various electrical, systems, circuits, controls, instruments and equipment. Basic understanding of electrical theory. Able to correctly wire simple devices, such as power/lighting panels, power/lighting distribution boxes, small terminal boxes, outlet receptacles, etc., with minimal supervision. Graduate of a NAVSEA approved Cableway Installation and Inspection course. (ET1 only) Full competency in Navy shipboard fiber optic methods and is currently, or has previously been, certified under NAVSEA Drawing 8477552B, which meets the requirements of NAVSEA Standard Item 009-123 and MIL-STD-1678. Must be able to perform work autonomously, with minimal guidance, and have an expectation to assist other job requirements beyond the role of E1/ET1. Must be prepared to perform an unassisted thorough practical demonstration of skills that may include tool and part identification, mock assembly and testing. Wage Range: $22.00-$40.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location.

Classification- Electrician Supervisor Job Status- Full-Time - Permanent WDFW Program- Capital Asset Management Program (CAMP) - Lacey Construction Shop Duty Station- Lacey, Washington - Thurston County Posting Timeline-This recruitment has been extended and scheduled to be posted until January 30, 2026. Application review is ongoing, submit your application materials as soon as possible, this recruitment may be closed at any time. Learn more about being a member of Team WDFW! Photo Caption: Autofish System - Photo Credit: WDFW This role serves as the agency's electrical expert, leading critical installation, repair, and maintenance work that keeps statewide facilities powered, safe, and efficient. Working closely with project managers and hatchery teams, you will oversee complex electrical systems, from motors and generators to alarms and distribution panels you will ensure every project stays on scope, time, and budget. You will also play key role in identifying system needs and shaping both short and long term hatchery operation electrical needs. What to Expect- Among the varied range of responsibilities held within this role, the Electrician Supervisor will, Project Management: * Supervise electricians, maintenance mechanics and other assigned personnel involved in installing, maintaining, repairing and altering electrical and mechanical systems and equipment. * Read plans and blueprints, inspect maintenance and installation projects to ensure compliance with local codes, determine scope of work, materials needed and their cost and availability. * Prepare reports and cost estimates, schedule maintenance, assist in developing projects including determining materials and equipment to project locations and purchases materials. * Collaborate with engineering, operations, and other departments to support production needs. * Respond to after-hours emergencies and support 24/7 facility operations as required. Electrical: * Install, modify, maintain and repair interior wiring and cables, connections for electric machines, switches and controls, fuse boxes, breaker panels, distribution and instrument panels, buzzer and bell circuits and power circuits. * Install, modify, maintain and repair electric motors, equipment and instruments such as motors and generators. * Inspect electric systems and equipment to detect and correct faulty or worn parts. Inspect electrical systems, check wires, poles, and transformers and keep lines cleared of tree limbs and brush. * Oversee installation and commissioning of new electrical equipment and systems * Supervise and perform preventative maintenance of electrical equipment and standby generators. * Perform electrical and mechanical inspection/testing to identify failing equipment or loss of efficiency. * Maintain testing records to spot trends and schedule repair. Supervision and Mentoring: * Supervise and mentor technical and professional level staff to support an effective, motivated team. * Monitor and inspect work in progress to ensure continuity and timely completion of work. * Manage personnel issues relating to staff conflicts, absenteeism, performance issues in a positive manner for the purpose of ensuring the efficient and effective functioning of the work unit. * Participate in team meetings, communicates status of ongoing projects and/or job tasks, and coordinate work schedule with team for the purpose of maintaining open communication. Water Distribution Systems: * Install flow metering devices for water right compliance and pump testing. Hatchery Alarms and Screens: * Supervise the design and installation of federal, local, and state funded hatchery facility's water alarm systems including panels and annunciators, radios, phone dialers, conduit and zone wiring, floats, inductive probes. Working Conditions: Work setting, including hazards: * Work is performed primarily at construction sites located on hatchery and wildlife areas, with occasional work in a fabrication shop or office environment. * Work on uneven terrain, riverbanks, slippery slopes, and other unstable surfaces, entering confined or difficult-to-access spaces, * Work and drive in inclement weather conditions, including operating motor vehicles in hazardous weather conditions such as snow and ice over mountain passes and on paved and unpaved roads. * Perform physically demanding tasks such as bending, stooping, squatting, twisting, pushing, pulling, and repetitively lift up to 50 pounds when loading or unloading trucks and moving materials on site * This position involves working in and near water, including tasks that require navigating, negotiating, and performing duties related to water environments. Schedule: Typically, Monday - Thursday 6:00 A.M. - 4:30 P.M., working 40 hours per week. Schedule may vary based on business needs, time of year, and/or weather conditions, including the potential for occasional evening or weekend work as needed. Travel Requirements: Travel is required 70-90% of the time, depending on the season, to various sites statewide. Overtime, overnight stays, and evening or weekend work may be required for emergencies, project deadlines, or travel needs. Tools and Equipment: Use and oversee the use of standard and specialized electrical tools and equipment, including electrical testing instruments (volt-ohm meter, megger, phase rotation meter, ammeter), power and hand tools (pipe benders, threaders, drills, impact drivers, roto hammers, wrenches, sockets, saws, knockout punches, and hammers), lifts and light equipment (platform, scissor, and telescopic lifts, and mini excavators). Customer Interactions: Interact frequently with federal, state, and local agencies, vendors, contractors, and internal staff. Represent the department in coordinating project schedules, resolving issues, and ensuring compliance with applicable codes and standards. Qualifications: Required Qualifications: Washington State Journey-Level Electrician certificate (EL01). AND All the following experience is required (experience may be gained concurrently): Four (4) years of professional experience as a journey level electrician to include all the following: * Variable Frequency Drives (VFD), motor, pump and well controls, standby generator systems, and Program Logistic Controller (PLC). Two (2) years of professional experience in in leadership or supervisory duties including: * Conflict resolution, training and development, planning and assigning work, evaluating performance. Two (2) years of professional experience using Microsoft Office Suite such as: * Word, Excel and Outlook. Certifications/Licenses: Valid Driver's License. Preferred Qualifications: In addition to the required qualifications, our ideal applicant will possess one or more of the following: * Valid Washington State Administrator or Master Electrician certification. * Knowledge of Washington State Purchasing rules and regulations. Your application must include the following: * A completed online application showcasing how your qualifications align with the job requirements. * An up-to-date resume. * A cover letter detailing your interest in the position, your relevant skills and experience, and why you are the ideal candidate. * At least three professional references with current contact information. In addition to pay and other special employee programs, there are other benefits that WDFW employees may be eligible for. Click the "Benefits" tab at the top of this announcement to learn more. Important Note: All new employees must complete an Employment Eligibility Verification Form (I-9 Form) on their first day of work. If hired for this or any position at WDFW, you will be required to provide documentation proving you are eligible to work in the United States. For a list of acceptable documents, please use the following link: *************************************************************** Union - WFSE: This position is covered by a collective bargaining agreement between the State of Washington, Department of Fish and Wildlife and the Washington Federation of State Employees (WFSE). This recruitment may be used to fill positions in addition to those listed. Veteran and Military Spouse Preference Notice: Per RCW 73.16.010 Veterans and qualifying spouses who meet the minimum qualifications of a position are eligible for preference during the initial application review stage. To receive this benefit, please do the following: * Notify us of your veteran or military spouse status by email at ****************************. * Veterans only - Attach a copy of your DD214 (Member 4 copy), NGB 22 or USDVA signed verification of service letter. * Please redact any PII (personally identifiable information) data such as social security numbers. * Subject line must include recruitment number, position, and spouse/veteran (example: 2024-1234 - Biologist 1 - Veteran) * Include your name as it appears on your application in careers.wa.gov. Diversity, Equity, and Inclusion Employer As part of WDFW's efforts to advance respectful and inclusive work environments, the Agency expects inclusivity as part of our professional interactions and communications. Therefore, we want to ensure that all individuals feel welcome, are treated fairly and respectfully. All staff are empowered to fully contribute to serving their work unit, Agency, and the citizens of Washington. The Department of Fish and Wildlife is an equal opportunity employer. We strive to create a working environment that includes and respects cultural, racial, ethnic, sexual orientation and gender identity diversity. Women, racial and ethnic minorities, persons of disability, persons over 40 years of age, disabled and Vietnam era veterans and people of all sexual orientations and gender identities are encouraged to apply. Request an accommodation: Persons needing accommodation in the application process or this announcement in an alternative format please contact Jayme Chase by phone ************ or email **********************, or the Telecommunications Device for the Deaf (TDD) at ************. Technical Difficulties: If you are having technical difficulties creating, accessing, or completing your application, please call NEOGOV toll-free at ************** or ******************. Other questions: If you have other questions regarding this position, please reach out to **************************** and reference job #2025-09073. Follow us on social media: LinkedIn | Facebook | Instagram lb

Job DescriptionSalary: $22 - $50 We are a well-established electrical contractor with over 35 years in business, specializing in residential, commercial, and low voltage electrical systems. We are seeking 02 Residential Electrical Journeymen and Trainees to install and distribute electrical power in single and multi-family dwellings. You may install the main circuit breaker box, plan and install electrical lines in new or existing construction and troubleshoot and make repairs to faulty lines and systems. As well as be involved with planning and installing low-voltage cable and communications systems, including alarm systems, power monitoring systems, computer networking and cable television systems. General responsibilities Execute plans of electrical wiring for well-functioning intercom and other electrical systems. Install electrical apparatus, fixtures and equipment for alarm and other systems. Install safety and distribution components (e.g. switches, resistors, circuit-breaker panels etc.) Connect wiring in electrical circuits and networks ensuring compatibility of components. Prepare and assemble conduits and connect wiring through them. Prevent breakdown of systems by routinely inspecting and replacing old wiring and insulated cables, cleaning circuits etc. Perform effective troubleshooting to identify hazards or malfunctions and repair or substitute damaged units. Skills, Abilities and Requirements Ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc.) and electrical drawings and blueprints. Thorough knowledge of safety procedures and legal regulations and guidelines. Excellent critical thinking and problem-solving ability. Excellent physical condition and flexibility to work long shifts and overnight. Successfully completed apprenticeship as an electrician. Valid license to practice. Benefits: Generous paid time off 7 paid holidays 100% company-paid medical, dental, and vision premiums 401(k) with company match Positive, collaborative work environment

As we spark a future filled with excellence, we're searching for Electricians to become pivotal players in our mission to deliver top-tier work! This role works under the supervision of the Electrical Foreman to ensure we provide quality electrical installations on each of our projects. With a clear path to the role of Foreman or Manager overseeing our dynamic builds, the sky is the limit for a career here! So, if you're ready to light up skylines as part of our passionate and experienced team, learn more below and apply today. Position Responsibilities Perform electrical installations on multifamily and commercial projects Learn and perform all scopes for large-scale electrical projects including distribution, rough, trim, and deck work Provide input and coordinate with other trades on each project Maintain safety and quality standards on all installations and tasks Ensure code compliance by inspecting and testing electrical systems, equipment, and components to identify hazards or needed repairs Here's What We're Looking For OSHA 30 certification preferred An active Journeymen or Master Electrician License Three or more years' experience as an Electrician Proficient knowledge of the National Electrical Code (NEC), local codes, and construction safety requirements Motivated individual with a strong work ethic Demonstrate and uphold Power Design's core values, which include integrity, accountability, teamwork, innovation, and growth Benefits and Perks Hourly pay range: $40-$45/hr Exciting, award-winning workplace culture focused on employee appreciation, recognition, and fun Comprehensive medical, dental, vision, and life insurance offered Short and long-term disability plans 401k with company matching and Flexible Spending Account (FSA) options available Paid time off and company holidays provided Discounts to a variety of services, mental and physical wellness resources, free Care.com membership, and other perks given to all Power Design team members At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide. This position is designated as a Safety Sensitive position and is subject to mandatory pre-employment and periodic criminal background checks and traffic records checks (as applicable). This position is also subject to mandatory pre-employment and random drug and alcohol testing which may include post- accident screening. In this position, you may be disqualified from employment based on the presence of marijuana in test results, even if you possess a medical card authorizing the use of medical marijuana.

About Seattle Center: Seattle Center is the region's premier civic, arts and family gathering place in the core of our city and region, home to more than 30 arts, cultural, and entertainment organizations, family attractions, and tourist amenities. Our mission is to create exceptional events, experiences, and environments that delight and inspire the human spirit to build stronger communities. As a department of the City of Seattle, Seattle Center contributes to the quality of life for Seattle residents-and the region's economy and image as its top visitor destination. About this position: We are seeking a qualified electrician to join our campus facilities team. This position will work closely with other trade leads and among the public to provide regular facility maintenance as well as production support of events. The work requires a journey level knowledge of electrical concepts, principles, methods and codes and a full knowledge of the operational aspects of both electrical equipment and systems. Currently, this open position is for 2nd shift. Schedule selection is based on seniority. Here is more of what you will be doing: * Diagnose and repair malfunctions in electrical equipment or control systems such as boilers, pumps, motors, generators, air compressors, fire alarms, refrigerators, overhead doors, electrical equipment on bridges or other electrical devices * Install, repair and maintain all electrical systems under the direction of the electrical crew chief * Teamwork and clear, concise, communication with staff, venue operators and the public are essential for safe and efficient operations * Troubleshoot systems which include some electronics * Install lighting fixtures, power outlets, control devices, heaters, thermostats, computer cables or cathodic protection equipment * Run conduit and pull wire for new and/or existing electrical installations * Modify or rewire existing electrical installations * Conduct preventative maintenance on electrical and electronic equipment * Purchase and/or order electrical supplies or parts from vendors, warehouse or distributors * Review blueprints, electrical schematics, project plans and specifications of electrical equipment installations * Replace ballasts, drivers & fuses, changes lamps in LED, fluorescent, HID and incandescent lighting fixtures * Install temporary power systems for special events Minimum Qualifications * Requires completion of an accepted four-year apprenticeship training program and journey-level electrician status (or an equivalent combination of education and/or training and/or experience). You will be successful in this role if you have: * Comprehensive knowledge of current electrical systems, including working knowledge of computerized lighting and control systems * Ability to assess and plan work tasks and provide progress reports * Ability to navigate computer-based email, time keeping, materials management, work order management system and progress reporting * Monitor and communicate clear and concise on phones and VHF radios * Ability to work collaboratively with other work units and clients * Strong communication skills both verbally and in writing * Excellent customer service skills and experience * Knowledge and skill in observing safety issues and requirements * Desire in continuing history of industry development License, Certification and Other Requirements: * State of Washington, (EL01) - Journey Level, Electrical License * Washington State Driver license Work Environment/Physical Demands: * Stand, walk, or bend for extended periods of time * Lift objects weighing in excess of 50 pounds * Work outdoors in all types of weather * Work in confined spaces or at heights from ladders and scaffolds * Individual schedules are 4 - 10-hour days or 5 - 8-hour days, weekend days may be part of normal schedule. 1st shift is 5 am to 3:30 pm and 2nd shift is 12 pm to 10:30 pm. Schedule selection is based on seniority. Shift schedules and hours worked may change to best meet the needs of the Seattle Center. Currently, the open position is 2nd shift. The full pay range for this step-progression position is $58.23 - $62.99 per hour. New employees begin at Step 1 of the pay progression, which is $58.23 hourly. Current City employees' starting rate of pay will be based on Personnel Rules regarding promotions. How to Apply: This posting will be open until filled. First review date will be on January 30, 2026 You must submit the following items to be considered for this position: * NEOGOV online (or paper) application * Supplemental questionnaire Your application may be rejected as incomplete if you do not include the relevant information in the application. Cover letters and/or resumes are not accepted in lieu of a completed application. Applications and/or Supplemental Questionnaires that state "see my resume" or "see my personnel file" are considered incomplete and will not be accepted. IMPORTANT NOTE: To align with our commitment to equity and the City of Seattle's Race and Social Justice Initiative, Seattle Center is collecting cover letters and resumes without personal identifiers to achieve a blind screening process. Driving Record - A current, "FULL" driving abstract from the Department of Licensing submitted upon offer of employment. Candidates with driving history that does not meet our current safety standards will be disqualified from consideration. Current City of Seattle employees in a driving position may be required to submit an updated abstract. Pre-Employment Physical - Successful candidates will be required to pass a pre-employment physical. Why work at the City? The City of Seattle recognizes every City employee must play a role in ending institutional and structural racism. Our culture is the result of our behavior, our personal commitments, and the ways that we courageously share our perspectives and encourage others to do the same. To cultivate an antiracist culture, we seek employees who will engage in dismantling racist policies and procedures, unlearn the way things have always been done, and create and provide equitable processes and services. Seattle Office of Civil Rights) The City of Seattle offers a comprehensive benefits package including vacation, holiday, and sick leave as well as medical, dental, vision, life, and long-term disability insurance for employees and their dependents. More information about employee benefits is available on the City's website at: ************************************************************** covered family-members/most employees-plans For helpful tips on the application process and recruitment process: Working at the City - Human Resources | seattle.gov

GFT is seeking a Field Electrician - Power System Assessments to join our Building and Places Team in Fife, WA! This role follows a hybrid work model, requiring regular attendance at our office and frequent local travel (up to 50 miles), with occasional travel to project sites across the U.S. A company vehicle/fuel reimbursement and full travel reimbursement are provided. At GFT, we're not just engineering the future; we're meticulously building it. Our comprehensive suite of construction and program management services reflects our unwavering commitment to excellence, safety, innovation, and sustainability. Our construction management services are the cornerstone of our commitment to transforming communities and enhancing lives. We oversee every construction phase to help ensure projects are completed on schedule, within budget, and to the highest safety and quality standards. What you'll be challenged to do: In this role, you'll support electrical system design and condition assessment projects for a wide range of facilities, including public, commercial, industrial, and institutional buildings. You'll play a critical part in documenting existing system conditions, supporting electrical system studies, and ensuring that our design teams have the information needed to engineer safe and efficient power distribution systems. In this capacity, the successful candidate will be responsible for the following: Perform field inspection of energized electrical equipment including panelboards, disconnects, MCCs, vaults, and transformers, generally operating at low voltage (≤480V), with occasional work involving medium-voltage systems (5 kV-15 kV) such as transformers, junction vaults, switches, and switchgear. Install and remove load monitoring equipment (current transformers, data loggers, etc.) for NEC 220.87 load studies. Collect and record electrical system data for coordination, short-circuit, and arc-flash studies. Prepare field reports, photos, and one-line markups documenting existing conditions. Review electrical drawings for constructability and assist with QA/QC. Follow NFPA 70E and LOTO safety procedures at all times. Report directly to the Project Manager and collaborate with electrical engineers and designers. Travel within the region and occasionally to out-of-state projects. What you will bring to our firm: Active Washington State EL01 Journeyman Electrician License Minimum 5+ years of experience as a journey-level electrician Experience with public, commercial, industrial, and institutional facilities preferred Strong understanding of the National Electrical Code (NEC) and NFPA 70E safety practices Ability to interpret electrical plans, one-lines, and panel schedules Excellent written and verbal communication skills, including report preparation Valid driver's license and clean driving record Proficiency in the Microsoft Office Suite (Excel, Word, Outlook) Compensation: The salary range for this role is $90,000 - $120,000. Salary is dependent upon experience and geographic location. Featured Benefits: • Comprehensive benefits package including wellness programs, parental leave, and pet insurance, in addition to medical, dental, vision, disability, and life insurance.• Tax-deferred 401(k) savings plan.• Competitive paid-time-off (PTO) accrual.• Tuition reimbursement for continued education.• Commitment to professional development, access to internal and external training programs, and support of active participation in professional organizations• Incentive compensation for eligible positions. At GFT, a privately held AEC firm, we innovate where transportation, water, power, and buildings converge. We call this the Infrastructure of Life. We measure our success by the strength of our relationships - that's why we're the employer of choice for 5,000+ of the industry's brightest engineers, planners, architects, inspectors, designers, and more. Our clients choose us for our expertise and prefer us for our nimble approach, creativity, and personal touch. Backed by over a century's experience, together we're building a lasting legacy for future generations: stronger communities, a healthier planet, and better lives. GFT: Ingenuity That Shapes Lives™ is an Equal Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veterans' status or other characteristics protected by law. Unsolicited resumes from third party agencies will be considered the property GFT. Location: Fife, WA Core Business Hours: 8:00 AM - 5:00 PM Employment Status: Full-Time Salary Range: $90,000-$120,000 GFT does require the successful completion of a criminal background check for all advertised positions. Unsolicited resumes from third party agencies will be considered the property GFT. #LI-FS1

Job DescriptionDescription: Serve Up to Three Customers Daily: Engage with customers to understand their needs, deliver excellent service, and provide solutions tailored to their home. Solution-Oriented Sales: Be dedicated to finding the best solutions for each customer, offering recommendations that encompass safety, efficiency, and long-term value. Expert Installation & Repair: Execute immediate, high-quality repairs and installations, ensuring each home improvement is completed professionally and up to code. Professional Representation: Serve as the face of As You Wish, upholding our standards of professionalism and excellence in every customer interaction. Collaboration: Maintain open communication with dispatch, management, parts, and installation teams to streamline each job. Ongoing Professional Development: Participate in training to continually refine your skills, maintain certifications, and provide customers with the latest in industry expertise. What We Offer $3000 Sign-on Bonus Competitive Pay: Competitive Pay $175k-250k annually Customer Review Incentives: Monthly bonuses for positive customer reviews that contribute to our reputation. Comprehensive Benefits Package: Health insurance with 75% employer-paid premium for employees, 50% for dependents. 401(k) matching Paid time off, including 6 holidays and two weeks of vacation. Supportive Resources: Uniforms, vehicle access, dispatch from home, gas card, and technology provided for success in the field. Requirements: Active EL01 or EL02 license (Washington State) Strong communication skills and a commitment to representing As You Wish with professionalism.

Overview Industrial Electricians (Ideal for Navy EMN or ETN) These positions are an immediate need and require relocation to Fort Wayne, IN. (If you meet this criteria but prefer a different location, contact us to review additional opportunities.) Full-Time | $90,000-$100,000+ Total First Year Compensation | Career Opportunity with an Industry Leading Company Our client is seeking highly skilled Industrial Electricians to join their expanding team. This is an exceptional full-time career opportunity designed for candidates with a strong technical foundation, particularly those with U.S. Navy Nuclear Electrician (EMN) or Nuclear Electronics Technician (ETN) backgrounds. If you thrive in fast-paced environments, excel at troubleshooting complex systems, and want to grow with a company that values technical excellence, we want to meet you. Key Responsibilities Perform electrical maintenance, troubleshooting, and repair on industrial equipment and control systems. Work with PLC-based controls, instrumentation, sensors, and automated systems. Diagnose electrical and electronic faults using schematics, test equipment, and system knowledge. Support installation, calibration, and commissioning of new equipment. Maintain and update documentation, wiring diagrams, and maintenance logs. Collaborate with engineering, operations, and maintenance teams to ensure system reliability. Participate in on-site technical support, system upgrades, and continuous improvement initiatives. Ensure all work complies with safety, quality, and operational standards. Ideal Candidate Profile U.S. Navy Nuclear Electrician's Mate (EMN) or U.S. Navy Nuclear Electronics Technician (ETN) Strong background in electrical systems, controls, instrumentation, and troubleshooting. Experience working with high-reliability systems, technical procedures, and strict safety protocols. Ability to interpret electrical schematics, wiring diagrams, and technical manuals. Comfortable relocating for a long-term career opportunity. Strong analytical thinking, attention to detail, and problem-solving ability. Compensation & Benefits $90,000-$100,000 first-year compensation, depending on experience. Full benefits package (health, dental, vision, retirement). Significant long-term growth and advancement opportunities within a rapidly expanding organization.

Job DescriptionSalary: $32.68 Electricians perform installs, repairs and maintaining complex AC/DC electrical systems, including generators, motors, panels, and communication circuits, ensuring all work is performed to code and project specifications, in a safe and efficient manner. This role requires working knowledge of reading schematics, running conduit and cable, and using diagnostic tools to troubleshoot and ensure safe, code-compliant operation. 2nd class mechanics should have a strong aptitude and ability to understand and follow instructions, with strong communication skills for sharing information with the supervisor or lead mechanics. Duties & Responsibilities Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and company safety policies. Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to: Company policies and procedures Local, state, and federal regulations ABS, NAVSEA Standard Items, and MSC GTRs General Specifications for Overhaul of Ships Remove, install, inspect, repair, replace, troubleshoot, and test electrical equipment with little or no guidance from the Supervisor or Lead Mechanic. Working knowledge of interpreting electrical schematics and blueprints to plan and install electrical systems. Install, maintain, and repair AC/DC generators, switchboards, distribution panels, lighting, and alarm circuits. Lay out and install conduit, cables, and wiring in designated spaces, including overheads, bulkheads, and decks. Connect, disconnect, and service motors, electrical panels, and associated equipment. Troubleshoot, test, and repair electrical components, including controllers, communication systems, and distribution systems. Replace or adjust components in motors and generators, such as brushes, bearings, and switches. Construct and connect instrument panels and cable systems according to specifications. Identify and install various cable types, ensuring correct placement and secure connections. Use tools and instruments to perform electrical diagnostics (e.g., meggers, volt meters, amp meters, tachometers) Perform routine and corrective maintenance on all shipboard or facility electrical systems. Possess and maintain all necessary hand and power tools required to perform electrical work safely and effectively. Communicate effectively with supervisors and team members to relay job status, material needs, or potential safety issues. Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Experience Requirements 2 - 4 years of experience as an Electrician in a shipyard. Other Requirements Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes. Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols. Regularly required to sit, reach, and use hands for handling or operating tools and equipment. Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids). Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads. Must be able to pass Drug Screening, Work Ability Screening. Must be able to obtain a Government facility security pass and badges at the various shipyards Tcnico works at (e.g., MHI, BAE, NASSCO, HII). Availability to work overtime, weekends, or travel to alternate worksites when project needs demand. Perform other duties as assigned.