Journeyman electrician jobs in Louisiana - 223 jobs

Job Posting End Date 01-19-2026 Please note the job posting will close on the day before the posting end date Perform all types of work involved in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required. The following list sets forth the principal duties required with the degree of supervision normally given. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task. IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. GENERAL SUPERVISION - An employee of equal or higher classification, knowledgeable of the task at hand and not necessarily at the job site. QUALIFIED PERSON - Station Electrician or Supervisor who is knowledgeable of the task or work to be performed, and is capable of performing the appropriate emergency rescue. Job Description *** Applicant MUST reside 30-mile radius of the Arsenal Hill Power Plant*** ESSENTIAL JOB FUNCTIONS: 1) Work on energized equipment up to 260 volts. After six months in classification, employee shall assist in work on conductors and equipment energized at voltages above 750 volts with direct supervision or assistance of personnel in higher classification. Select proper prints and/or drawings for various work and have a basic understanding of each. Use voltmeters, ohmmeters, ammeters, insulation meggers and other test equipment associated with station work. 2) Assist in disassembling and reassembling, inspecting, maintenance, and repairing of station transformers, circuit breakers, portable substations, rotating machinery, network protectors and transformers, air ducts and heat exchangers; install and maintain station batteries; replace nitrogen bottles and air filters. 3) Assist in station work such as installing conduit, pipe, cable and wire; use hand lines to pass tools and materials; dig and backfill trenches; remove and spread stone; uncrate equipment and material; install and remove portable substation fences, barriers and safety signs; paint structures and equipment; climb station structures. Use various kinds of tapes, insulating materials, protective and insulating paints and varnishes, and understand proper application of each. 4) Assist in making visual inspections such as check lights, heaters, circuit breaker counters, oil levels, and bus connections; read gauges such as voltmeters, ammeters, hydrometers, pressure and level gauges; apply start-run-stop tests on emergency generators, water and sump pumps and fire engine motors. Report abnormal conditions. Replace lamps, switches, duplex outlets, dry cells; install and maintain signal and communication systems. Assist in various tests involving oil samples, connecting and operating portable and stationary oil handling equipment. Assist in electrical tests, TTR, Doble, core megger and resistance for transformer testing, etc. 5) Assist in station switching including use of radio communication and/or direct instruction from higher classification, assist in checking equipment clearances and making de-energized tests, place grounds as directed. 6) Knowledge and proficiency in steel and aerial lift rescue. 7) Maintain records and prepare and submit reports as required. 8) Attend and participate in training and assist in the training of other employees as assigned. 9) Use and operate various company vehicles, specialized equipment, hand and power tools. Operate company vehicles, cranes, aerial lifts and specialized equipment. Perform duties incidental to the operation of such equipment Use hand and power tools; operate portable generators, blowers and pumps; inspect and store personal protective equipment. Knowledge and use of various knots used in station work. 10) Perform similar or less skilled work as assigned. 11) Assist employees of equal or higher classification; direct the work of employees assigned to assist. 12) Become familiar with the Company's safety rules and practices and in the application of resuscitation and First Aid as presented in the Company's Safety Manual. Perform duties in accordance with the Company's safety rules and operating regulations and practices. MINIMUM REQUIREMENTS: Education requirements are listed below:Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor.Work Experience requirement listed below:No previous work experience required. OTHER REQUIREMENTS: Must be available to work overtime, call-out overtime and shift work, as required.Travel requirements are expected > 50 % of the time Physical demand requirements details are listed below: Distance in feet to climb and work on a ladder/structure: 50 ft and higher Knowledge of print reading sufficient to interpret and apply information from drawings, instruction manuals, one-line diagrams, and associated documents. Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression, or vacate the current classification. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Station Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Ability to deal with customers and other employees in a courteous and professional manner. Ability to plan work and to properly instruct and brief others. Employee shall obtain the appropriate valid commercial driver's license prior to the end of the designated probationary period. Must meet all vehicle operation requirements ad designated by federal and/or state law. Considerable travel and overtime may be required to complete work assignments. Must successfully complete Physical Abilities Test (PAT) PHYSICAL DEMANDS: physical demands required for this job include but not limited to: Minimum Requirement Station Electrician Amount of Weight Lifted from Floor/Ground to Waist Level: 75 Amount of Weight to be Carried for 20 Feet: 60 Amount of Weight Lifted to Chest Level:50Amount of Weight Lifted to Eye Level:30 Distance to Walk Accumulated over the Course of an 8-Hour Shift:½ Mile Distance in Feet to Climb and Work on a Ladder/Structure:50 and Higher Distance in Feet to Ascend to and Work in a Bucket/Lift:100 and Higher (Tested at 60') Ability to Discriminate between Colors:Yes (Tested) Compensation Data Compensation Grade: U072-R30 Compensation Range: $36.05 - $53.36 The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. This is considered to be a safety sensitive position. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

The Electrician role collaborates closely with our electrical installation teams, ensuring that all company policies and procedures are upheld to the highest standards. This role involves managing daily electrical tasks according to specific job requirements and following the guidance of the electrical team lead. It's essential for the electrician to effectively execute all project duties in line with company standards, adhering to established operating procedures. Requirements Knowledge of electrical codes and best practices Print reading, design and electrical layout Install equipment, install conduit and fittings, pull wire, terminate Test and record wiring for insulation resistance and IV curve tracing as needed Configure basic electrical devices Ensure accurate electrical take-off and procurement Maintain company vehicle and vehicle stock Ensure code compliance and clean work and jobsite Meet technical requirements of equipment and site conditions Troubleshoot and repair malfunctioning equipment and systems Effectively execute installation work, customer interaction, and safety guidelines Role models the Solar Alternatives organizational culture daily. Qualifications 3+ Years Journeyman Electrician Familiarity with construction and electrical work terminology Self-driven work ethic and good time management Ability to use online scheduling and communication tools Clean driving record and valid license Verifiable job references Comprehensive familiarity of 2014 and 2017 NEC 40-50+ hours per week, 5-6 days per week Preferred but not required: Power generation experience OSHA Certification (10 or 30 hour) Associates or greater college education NABCEP or equivalent certification Physical Demands & Work Environment: Ability to work unsupervised and occasionally lift up to 50 pounds. Regularly required to stand, walk, sit, and use hands/fingers. Ability to travel as required. Work performed in office, or customer installation locations. Benefits COMPENSATION and BENEFITS: Salary starts at $25-35/hr based on qualifications, plus opportunities for sales bonuses. Benefits include majority-paid medical, dental, vision and matching 401K program. Earned paid time off starts at two weeks annually.

In 2019, T. Parker Host acquired United Bulk Terminals (UBT) on Mile 55 of the Mississippi River as one of the largest bulk terminals in the U.S. Gulf, specializing in coal and petcoke. This 1,200 acre property in Davant, Louisiana is capable of extensive loading, discharging and storage - with deep-water docks, fleeting capacity for 500 barges and over 40 pieces of heavy equipment to handle cargo loads. Since the acquisition, HOST has made extensive improvements in systems and equipment, making the facility safer, more environmentally friendly, and more efficient to better serve our customers. Position Summary: Install, maintain, diagnose and repair equipment/instrumentation related to the unloading, loading, transfer and storage of cargo including conveying equipment, AC and DC motors, PLCs and IO modules, VFDs and DC Drives, associated wiring and power supplies on ship loaders, stacker/reclaimers, continuous barge unloaders, bucket cranes and various support equipment. Essential Responsibilities and Duties: Diagnose and repair equipment various equipment used to transfer cargo to/from barges and vessels by use of conveying equipment Work from blueprints, wiring schematics, manuals or verbal instructions Perform preventive maintenance on all terminal equipment Complete work in a safe and timely manner in compliance with company and regulatory requirements Safely operate various types of equipment related to transfer of cargo for testing purposes Perform routine inspections on assigned equipment and report finding in accordance with policy and procedures Accurately document information generated in support of operations to include but not limited to: receiving, shipping and storage of bio-mass. Maintenance inspections and safety related reports. Participate in and successfully complete required training and related testing Identify, report, and correct safety and environmental concerns. Perform any other terminal functions as trained, requested and instructed by supervision. Education, Knowledge, Experience, Skills and Abilities Required: High School Graduate or equivalent required. 5 years of prior industrial electrical experience. Master Electrician-level knowledge/experience in troubleshooting at a component level of industrial electronic controls: VFDs/DC drives, PLCs, HMIs, industrial networks, and associated wiring. Working knowledge of Ohm's Law. Experience with Emerson (formerly GE) RX3i controllers and Machine Edition software preferred. Ability to attain and maintain a Transportation Workers Identification Credential (TWIC). Support Operations through the installation, programming, start-up and maintenance of electrical, automation and process control equipment Responsible for installation, programming, calibration, preventive maintenance, troubleshooting, and repair of electrical and automation equipment in order to improve plant system operation/uptime and reduce total operating costs Support all types of facility systems including Emerson PLCs, Control Techniques VFDs and DC Drives, SEL MV control and monitoring, bulk cargo belts scales, wireless radios and related equipment, 120v-4160v motor controls, and others. Experience with Medium Voltage motors and starters preferred. Successful applicant will work closely with Operations, Engineering, Maintenance, Information Technology Groups Thoroughness and attention to detail are required as a significant amount of time may be spent working with complex PLC programs and advanced process control systems Will be subject to overtime and call-out work as needed. Other tasks may also be assigned to support Operations as necessary Successful completion of background check. Ability to maintain regular, dependable attendance. Physical Requirements: Must meet “fit for duty” requirements upon job offer (pre-employment physical and drug test) The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces Ability to lift up to 50 pounds and work at protected heights up to 130 feet. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Perform work in dusty environment and all types of temperature/weather conditions. HOST, and its affiliated companies, is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. For more information, please visit ******************* or Apply Online Here

About Us At our Company, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At our Company, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Exciting News About Our Future! Our company is currently undergoing an exciting brand transformation, including a change in our name. As part of this process, you may see references to both our current name, Bernhard, and our future name, ENFRA, during your application process. This change reflects our commitment to growth, innovation, and providing even greater value to our employees, customers, and community. We appreciate your understanding during this transition and look forward to sharing this new chapter with you. If you have any questions, feel free to ask during the interview process! Overview The Electrician is responsible for installations, alterations, additions and/or repairs of electrical systems, conductors and associated materials and equipment within the commercial and industrial electrical industry. Responsibilities Specific responsibilities include: Responsible for assigned field installations, alterations, additions, and/or repairs of electrical systems, conductors, and associated materials and equipment. Work within an established time frame and ensure that this work is done in conformance with quality work standards, project man-hours, and in the established company guidelines and within regulatory compliance. This position is Full-Time, Non-Exempt, and reports to the Foreman or Superintendent. Qualifications Required Education, Experience, and Qualifications High School Diploma. 4 or more years of experience. Must be able to report to assigned job site location on time as directed. Knowledge and understanding of OSHA. Clearly understand and comply with company/job safety (OSHA). Must have knowledge of: Properly implement grounding practices Transformer Protection/Connections Insulating Oils & Overcurrent Protection Parallel circuits Fuse Operate Circuit Breakers Motors Inductance and Capacitance Power Switching Procedures Terminations Blueprints/Shop Drawings, including symbol use. Effective verbal and written communication skills. Maintain and properly store tools, equipment, and/or materials. Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. Ability to multitask and perform duties outside of the scope of work when necessary. Preferred Education, Experience, and Qualifications Electrical Journeymen license. Travel Requirements As required by job assignment. Physical/Work Environment Requirements Ascending and descending ladders, stairs, scaffolding, ramps, and/or poles. Ability to work 10 hours per day, night shift, 40 hours per week and overtime as required with little or on short notice. Job may require working in all elements, depending on job location, time of year, heat, cold, rain, and/or wind. Must be able to utilize provided construction site sanitary facilities. (Porta-Johns). Must wear personnel equipment at all times. (i.e. hard hats, safety glasses, safety harnesses as required) and respirators when needed. Light to heavy work that includes adjusting and/or moving objects up to 50 pounds. Must be capable of digging trenches, either by use of hand tools or equipment. Ability to work in restrictive/tight areas. We are proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

**Company:** Expand Energy Our core values - Stewardship, Character, Collaborate, Learn, Disrupt - are the lens through which we evaluate every business decision\. As a dynamic, growing company that offers extremely competitive compensation and benefits, our employees are our most valued assets and the foundation of Expands performance among our E&P competitors\. We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team\. We realize that, historically, underrepresented groups feel the need to be 100% qualified in order to apply\. If you meet any combination of our requirements, we encourage you to apply\. We strive to hire people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes our company stronger\. ## **Job Summary** The Service Electrician is primarily responsible for installing and or repairing any electrical issues within Expand operations\. ## **Job Duties & Responsibilities** The following represents many of the duties performed by the position but is not meant to be all inclusive nor present other duties from being assigned when necessary\. + Evaluates electrical problems and take corrective action + Make connections to fixtures and power equipment + Installation of control and distribution apparatus + Testing circuits to insure electrical compatibility and safety + Ordering of electrical parts used for equipment\. + Inspects installed equipment to ensure proper & safe operation + Follow all lock out / tag out procedures required by company policy + Required to regularly work overtime and be on call 24 hours per day + Required to travel to multiple areas in order to support all company interest + Requires frequent contact with other drilling personnel and external contact with vendors ## **Job Specific Skills** + Knowledge of basic electronics + Basic software knowledge + Knowledge of computer hardware maintenance + Troubleshooting electronic circuits + Operating test equipment ## **Education & Experience** + Minimum: two years of prior experience as an electrician + High school diploma or equivalent required + Associates degree in a related field or Technical Certificate required ## **Additional Qualifications** Candidates must reside or be willing to relocate within a 60\-mile radius of the Mansfield Field Office \(1970 Highway 84, Mansfield, LA 71052\) to be considered for this position\. Expand Energy takes necessary action to ensure that all applicants are treated without regard to their race, color, religion, sex, sexual orientation, age, gender identity, national origin, genetic information, disability, pregnancy, military or veteran status or any other protected characteristic as established by law\. Expand Energy Corporation's operations are focused on discovering and developing its large and geographically diverse resource base of unconventional oil and natural gas assets onshore in the United States\. **Job Segment:** Electrician, Testing, Electrical, Engineering, Technology

Skilled Electricians are needed for Industrial and Commercial jobs in the Lafayette, Louisiana region. The Electrician performs a variety of electrical tasks safely, including installing, troubleshooting, maintaining, testing, repairing and installation in large commercial projects. Provide quality electrical installations under the supervision of the electrical foreman Ensure code compliance through proper installation of electrical components You will perform electrical installations of a commercial nature Plan layout and installation of electrical equipment, conduit, wiring and fixtures, based on job specifications and local codes Work from ladders, scaffolds, or lifts to install electrical conduit, equipment, fixtures or wiring Install, inspect and test electrical systems. Installations include but are not limited to panel boards, conduits, lay-in fixtures, wall packs, exit signs, light fixtures, disconnects, breakers, power distribution equipment and power supply wiring. Read and understand labels, job site maps, instruction manuals, and written instructions accurately all duties in conformance to appropriate safety and security standards May perform other duties or be required to work on different projects as needed Requirements Electrician Job Requirements:· Must provide your own hand tools to get the job done Able to perform 8+ hours of physical labor each day in varying temperature extremes and other outside conditions Able for FT work including night and weekend shifts Ability to operate a smart phone technology Able to pass math & reading test Must have a valid Drivers License & reliable transportation Legally eligible to work in the US Pre-employment background screening (criminal, drug screen and DMV) is required for all positions Benefits Package Includes: Top industry weekly pay Daily travel per diem of $50.00 Outstanding Health Benefit Package Nine Company paid holidays Generous PTO Program 401k with 100% company match (up to 6%) Company Paid Life Insurance Employee referral program Training and Career Growth Opportunities We offer challenging projects, outstanding benefits and training opportunities. COME BUILD YOUR FUTURE WITH US! Williams & Rowe is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. We promote a Drug-Free Workplace.

Operates, maintains, and repairs power generation systems and their controllers. Provide analysis and implement corrective actions to maintain equipment and systems operation to ensure maximum efficiency and stable performance. Primary focus of position is the maintenance and troubleshooting of electronic control devices for generators, switch gear, and electrical distribution systems. Responsibilities Electrical Systems Maintenance * Maintains repairs, replaces and installs electrical systems to include, but not limited to, switches, fixtures, motors, transformers, controllers, associated electronic components, distribution and wiring. * Completes periodic inspections, recurring maintenance requirements and associated documentation. Maintains systems to conform to written guidelines and applicable changes. * Acts as plant operator for electrical and power generation using work orders, parts requests, drawings/schematics/blueprints and manuals in order to accomplish assigned duties. Maintain systems knowledge * Knowledgeable of cathodic protection, communications, and grounding systems. Training and troubleshooting * Develops and provides training to other technical staff and performs comprehensive troubleshooting and repair. Other duties * Performs other duties as assigned or requested. Qualifications Experience Five years experience as an Electrician with one year in maintenance, repair, and operation of electrical power generators Education High school diploma or equivalent Licensure Valid LA Driver's License

Operates, maintains, and repairs power generation systems and their controllers. Provide analysis and implement corrective actions to maintain equipment and systems operation to ensure maximum efficiency and stable performance. Primary focus of position is the maintenance and troubleshooting of electronic control devices for generators, switch gear, and electrical distribution systems. Electrical Systems Maintenance * Maintains repairs, replaces and installs electrical systems to include, but not limited to, switches, fixtures, motors, transformers, controllers, associated electronic components, distribution and wiring. * Completes periodic inspections, recurring maintenance requirements and associated documentation. Maintains systems to conform to written guidelines and applicable changes. * Acts as plant operator for electrical and power generation using work orders, parts requests, drawings/schematics/blueprints and manuals in order to accomplish assigned duties. Maintain systems knowledge * Knowledgeable of cathodic protection, communications, and grounding systems. Training and troubleshooting * Develops and provides training to other technical staff and performs comprehensive troubleshooting and repair. Other duties * Performs other duties as assigned or requested. Experience Five years experience as an Electrician with one year in maintenance, repair, and operation of electrical power generators Education High school diploma or equivalent Licensure Valid LA Driver's License

Who We Are Thermon is a diversified technology company and a global leader in industrial process heating, temperature maintenance, environmental monitoring and temporary power distribution solutions. We deliver engineered solutions that enhance operational awareness, safety, reliability and efficiency to deliver the lowest total cost of ownership. Thermon offers over 250 products, software and services across multiple brands, providing a range of offerings from boilers, transportation heaters, and liquid load banks to tubing bundles and heat trace. We are the silent guardians of critical infrastructure. From the relentless demands of chemical plants and the intricate networks of rail and transit to the vital pulse of power generation, we innovate solutions that ensure optimal operation, protect critical assets, and maximize efficiency. We care deeply about the success of our customers, the well-being of our people, and the reliability of every product we design. This drives our unwavering commitment to safety and integrity in everything we do. Through collaboration, we unite a rich legacy of expertise with a trusted global team, partnering side-by-side with our customers. We transfer the warmth needed to make life work. The Role Must be able to maintain an orderly in-field stock of materials, deliver materials to work stations in a prompt and precise manner, and assist/make cable pulls, running conduit, and erecting cable tray. Rate will depend on experience and passing electrician test. What You Will Do * Testing electrical and mechanical circuits for efficiency. * Testing, Reading, Operating, Maintaining, Repairing Electrical and Heat Trace systems. * Reading and comprehending electrical blue prints, schematics, one-line diagrams. * Install, test, and commission Electric Heat Tracing. * Following electrical codes and regulations set by the State of Texas and the US Gov. Proficient in reading and following directions, writing reports. * Unload delivery trucks. * Assembling, installing, maintaining, and repairing electrical and mechanical systems. * Performing maintenance and repair of electrical, interior, and exterior electrical components. * Available for Schooling and training. * Have your own hand tools. To be successful in this role you will possess * Industrial Construction Experience in a fast-paced business environment is a plus * High school and or trade school required. * Must put safety above all * Electrical License * NCCER certification/or equivalent work experience. * TWIC card required (Transportation worker Identification card) * Industrial experience. SCADA, PLC and Control Automation i.e. Energy Management Controls preferred * Proven history of leading, teaching, developing, and mentoring others successfully is a plus. * Professional, Organized and dedicated * Ability to handle stressful situations * Excellent communication and personal skills * Must be able to understand and communicate in English * Ability to perform work in industrial facilities in extreme ambient conditions including climbing staircases, or ladders We wish to thank all applicants for their interest, however, only those invited for an interview will be contacted.

Licensed electrician capable of doing both construction and maintenance electrical work. Responsible for the installation, repair and maintenance of electrical equipment and fixtures. This is an Essential Personnel position, which can require that the incumbent must report for duty and work through emergencies, and also can be designated by the supervisor as essential for the accomplishment of work, or for the completion of a critical task. * Must be capable of receiving oral, written and diagrammed instructions regarding plumbing installations, troubleshooting and maintenance based on current codes. * Able to handle multiple projects * Ability to utilize TMA Facilities maintenance software on portable devices (e.g. iPod) * Ability and willingness to work evenings, weekends, and possibly holidays * Ability to be on call * High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. * Five (5) years' experience in electrical trade * Must hold a Journeyman's electrical license * Must have a valid and unrestricted (not including corrective lens needs) U.S. Driver's license and must meet the Tulane University Motor Vehicle policy criteria to become authorized as a driver

Job DescriptionSalary: Primary Responsibilities Responsibilities include performing electrical tasks safely including installation, troubleshooting, maintenance, testing, repairs on all plant electrical, electronic, and PLC equipment, and corrective and preventative maintenance. Behavioral Profile The candidate must be willing to learn, grow, and work independently and with others. He/she must be flexible, self-motivated with a can-do attitude, and be detail and action oriented. He/she must also demonstrate prioritization skills, the ability to multitask, cross-train, be committed to quality, and work with a sense of urgency. Job Qualifications The ideal candidate should have a high-school diploma or equivalent, 3 years of experience in industrial/electrical maintenance, and experience working in an industrial environment. The candidate must have knowledge of AC and DC power and control circuits, three-phase power circuits, and VFDs. Experience and understanding of PID process control loops and associated equipment is also required. The candidate must demonstrate mechanical aptitude, the ability to grasp complex concepts easily and pay attention to detail. Additionally, he/she must demonstrate an outstanding attendance record and verbal and written communication skills. Benefits Some of the benefits our team members enjoy include the following: Healthcare-Legacy Health & WellnessandLegacy Pharmacy Wellness Program Flexible Spending Account Additional Insurance Paid Time Off Retirement Chaplaincy Services Education About RoyOMartin At RoyOMartin, people are our number-one asset. We are committed to keeping them safe and supporting them as they learn and grow. Theres just something unique about being in the people business: Our leaders are involved in daily operations and nurture personal relationships; our employees stick with us for the long term and appreciate our top-notch benefits, and we believe that everyone has the capacity to succeed. With superior product quality and outstanding customer service at the heart of our more than 1,200-person operation, RoyOMartin is proud to serve Americas building industry. Through our Forest Stewardship Council (FSC) certification, customers can be assured that we responsibly source our raw materials from regional forests to produce Made in the U.S.A. oriented strand board (OSB), plywood, timbers, and boards in safety-award-winning manufacturing environments. RoyOMartin is an Equal Opportunity Employer.

Job Description The Electrician role collaborates closely with our electrical installation teams, ensuring that all company policies and procedures are upheld to the highest standards. This role involves managing daily electrical tasks according to specific job requirements and following the guidance of the electrical team lead. It's essential for the electrician to effectively execute all project duties in line with company standards, adhering to established operating procedures. Requirements Knowledge of electrical codes and best practices Print reading, design and electrical layout Install equipment, install conduit and fittings, pull wire, terminate Test and record wiring for insulation resistance and IV curve tracing as needed Configure basic electrical devices Ensure accurate electrical take-off and procurement Maintain company vehicle and vehicle stock Ensure code compliance and clean work and jobsite Meet technical requirements of equipment and site conditions Troubleshoot and repair malfunctioning equipment and systems Effectively execute installation work, customer interaction, and safety guidelines Role models the Solar Alternatives organizational culture daily. Qualifications 3+ Years Journeyman Electrician Familiarity with construction and electrical work terminology Self-driven work ethic and good time management Ability to use online scheduling and communication tools Clean driving record and valid license Verifiable job references Comprehensive familiarity of 2014 and 2017 NEC 40-50+ hours per week, 5-6 days per week Preferred but not required: Power generation experience OSHA Certification (10 or 30 hour) Associates or greater college education NABCEP or equivalent certification Physical Demands & Work Environment: Ability to work unsupervised and occasionally lift up to 50 pounds. Regularly required to stand, walk, sit, and use hands/fingers. Ability to travel as required. Work performed in office, or customer installation locations. Benefits COMPENSATION and BENEFITS: Salary starts at $25-35/hr based on qualifications, plus opportunities for sales bonuses. Benefits include majority-paid medical, dental, vision and matching 401K program. Earned paid time off starts at two weeks annually.

In 2019, T. Parker Host acquired United Bulk Terminals (UBT) on Mile 55 of the Mississippi River as one of the largest bulk terminals in the U.S. Gulf, specializing in coal and petcoke. This 1,200 acre property in Davant, Louisiana is capable of extensive loading, discharging and storage - with deep-water docks, fleeting capacity for 500 barges and over 40 pieces of heavy equipment to handle cargo loads. Since the acquisition, HOST has made extensive improvements in systems and equipment, making the facility safer, more environmentally friendly, and more efficient to better serve our customers. Position Summary: Install, maintain, diagnose and repair equipment/instrumentation related to the unloading, loading, transfer and storage of cargo including conveying equipment, AC and DC motors, PLCs and IO modules, VFDs and DC Drives, associated wiring and power supplies on ship loaders, stacker/reclaimers, continuous barge unloaders, bucket cranes and various support equipment. Essential Responsibilities and Duties: * Diagnose and repair equipment various equipment used to transfer cargo to/from barges and vessels by use of conveying equipment * Work from blueprints, wiring schematics, manuals or verbal instructions * Perform preventive maintenance on all terminal equipment * Complete work in a safe and timely manner in compliance with company and regulatory requirements * Safely operate various types of equipment related to transfer of cargo for testing purposes * Perform routine inspections on assigned equipment and report finding in accordance with policy and procedures * Accurately document information generated in support of operations to include but not limited to: receiving, shipping and storage of bio-mass. Maintenance inspections and safety related reports. * Participate in and successfully complete required training and related testing * Identify, report, and correct safety and environmental concerns. * Perform any other terminal functions as trained, requested and instructed by supervision. * Education, Knowledge, Experience, Skills and Abilities Required: * High School Graduate or equivalent required. * 5 years of prior industrial electrical experience. * Master Electrician-level knowledge/experience in troubleshooting at a component level of industrial electronic controls: VFDs/DC drives, PLCs, HMIs, industrial networks, and associated wiring. * Working knowledge of Ohm's Law. * Experience with Emerson (formerly GE) RX3i controllers and Machine Edition software preferred. * Ability to attain and maintain a Transportation Workers Identification Credential (TWIC). * Support Operations through the installation, programming, start-up and maintenance of electrical, automation and process control equipment * Responsible for installation, programming, calibration, preventive maintenance, troubleshooting, and repair of electrical and automation equipment in order to improve plant system operation/uptime and reduce total operating costs * Support all types of facility systems including Emerson PLCs, Control Techniques VFDs and DC Drives, SEL MV control and monitoring, bulk cargo belts scales, wireless radios and related equipment, 120v-4160v motor controls, and others. Experience with Medium Voltage motors and starters preferred. * Successful applicant will work closely with Operations, Engineering, Maintenance, Information Technology Groups * Thoroughness and attention to detail are required as a significant amount of time may be spent working with complex PLC programs and advanced process control systems * Will be subject to overtime and call-out work as needed. Other tasks may also be assigned to support Operations as necessary * Successful completion of background check. * Ability to maintain regular, dependable attendance. Physical Requirements: * Must meet "fit for duty" requirements upon job offer (pre-employment physical and drug test) * The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces * Ability to lift up to 50 pounds and work at protected heights up to 130 feet. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. * Perform work in dusty environment and all types of temperature/weather conditions. HOST, and its affiliated companies, is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. For more information, please visit ******************* or Apply Online Here

**Company:** Expand Energy Our core values - Stewardship, Character, Collaborate, Learn, Disrupt - are the lens through which we evaluate every business decision\. As a dynamic, growing company that offers extremely competitive compensation and benefits, our employees are our most valued assets and the foundation of Expands performance among our E&P competitors\. We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team\. We realize that, historically, underrepresented groups feel the need to be 100% qualified in order to apply\. If you meet any combination of our requirements, we encourage you to apply\. We strive to hire people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes our company stronger\. ## **Job Summary** The Service Electrician II is primarily responsible for installing, maintaining, and repairing any electrical or communication issues within EDC operations\. Some mechanical duties may be required along with other duties deemed necessary within EDC\. ## **Job Duties & Responsibilities** Job work schedule will be an equal rotation of a 21 on, 21 off schedule\. On occasion worker may be needed to work on some or all their days off and in or out of their normal area\. The following represents many of the duties performed by the position but is not meant to be all inclusive nor present other duties from being assigned when necessary: + Install, maintain, and troubleshoot 5 - 600 VAC electrical systems and equipment + Maintain existing electrical systems which includes, but not limited to, motor controls, networking, PLC's VFD's, relays, generators, and power transducers + Inspect installed equipment to ensure proper and safe operations + Perform preventative maintenance to reduce equipment failure and down time + Follow all lock out/tag out procedures required by company policy + Maintain records of repairs and modifications of equipment + Document and order parts used to obtain current inventory count ## **Job Specific Skills** + Knowledge of basic electronics + Basic software knowledge + Knowledge of computer hardware maintenance + Read and interpret electrical blueprints and schematics to determine systems layouts and wiring + Troubleshooting electronic circuits + Operating test equipment ## **Education & Experience** + Minimum: 3\+ years of prior experience in electricial maintenance in the oil and gas industry + High school diploma or equivalent required + Associates degree in a related field or Technical Certificate required ## **Additional Qualifications** Candidates must reside or be willing to relocate within a 60\-mile radius of the Mansfield Field Office \(1970 Highway 84, Mansfield, LA 71052\) Expand Energy takes necessary action to ensure that all applicants are treated without regard to their race, color, religion, sex, sexual orientation, age, gender identity, national origin, genetic information, disability, pregnancy, military or veteran status or any other protected characteristic as established by law\. Expand Energy Corporation's operations are focused on discovering and developing its large and geographically diverse resource base of unconventional oil and natural gas assets onshore in the United States\. **Job Segment:** Electrician, Testing, Electrical, Engineering, Technology

Requirements Electrician Job Requirements:· Must provide your own hand tools to get the job done Able to perform 8+ hours of physical labor each day in varying temperature extremes and other outside conditions Able for FT work including night and weekend shifts Ability to operate a smart phone technology Able to pass math & reading test Must have a valid Drivers License & reliable transportation Legally eligible to work in the US Pre-employment background screening (criminal, drug screen and DMV) is required for all positions Benefits Package Includes: Top industry weekly pay Daily travel per diem of $50.00 Outstanding Health Benefit Package Nine Company paid holidays Generous PTO Program 401k with 100% company match (up to 6%) Company Paid Life Insurance Employee referral program Training and Career Growth Opportunities We offer challenging projects, outstanding benefits and training opportunities. COME BUILD YOUR FUTURE WITH US! Williams & Rowe is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. We promote a Drug-Free Workplace.

**About Us** At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. **Overview** The Electrical Technician I is responsible for installations, alterations, additions and/or repairs of electrical systems, conductors and associated materials and equipment within the residential, commercial and industrial electrical industry. The incumbent of this position is responsible for assigned field installations, alterations, additions and or repairs of electrical systems, conductors and associated materials and equipment. Incumbent performs this work within an established time frame and ensures that this work is done in conformance with quality work standards, project man-hours and in the established company guidelines and within regulatory compliance. **Responsibilities** + Must be able to report to assigned job site location on time as directed. + Maintain and properly store tools and equipment. + Proper use and safe handling of tools, equipment and materials. + Accurately organize materials and tools in order to maintain clean and neat work area. + Has ability to erect and understand pulley systems to lift/move heavy objects. + Must be capable of digging trenches, either by use of hand tools or equipment. + Accurately read labels, job site maps/directions, manuals and written instructions. + Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. + Employee must be able to direct/train helpers & apprentices in proper work practices. + Must have ability to plan and organize tasks in order to meet task deadlines. + Ability to visualize completed work prior to installation. + Must be able to perform accurate layout of electrical systems with code clearances. + Have skill to accurately install duct banks and understand spacing requirements. + Able to install panelboards and transformers. + Understand the Proper use/selection of cables for proper installation per NEC. + Ability to perform material take-off's to accurately execute work in a timely manner. + Must be able to communicate with Customer on issues and solutions. + Must be able to troubleshoot. **Qualifications** **Required Education, Experience, and Qualifications** + High School Diploma or GED. + 4 or more years of experience and meets requirements. + Experience in terminations. (I.e. both aluminum and copper, twisted pair cable, terminating coaxial cable). + Clearly understand and comply with company/job safety requirements. (OSHA). + Must have ability & knowledge to properly give "hand signals" to operators. + Knowledge of series circuits, Ohms's Law, DC Circuits and resistance and its effect. + Ability to add, subtract, divide and use electrical formulas accurately. + Knowledge of blueprints/shop drawings, including symbol use. + Knowledge of use of degrees in bending conduit (i.e. concentric bending.). + Knowledge of switching procedures. + Knowledge and understanding of OSHA requirements. + Employee must understand and follow the NEC. + Must have knowledge of: Properly implement grounding practices, Transformer Protection/Connections, Insulating Oils & Overcurrent Protection, Parallel circuits, Fuse Operate Circuit Breakers, Motors, Inductance and Capacitance Power factors. + Effective verbal and written communication skills. + Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. + Versed in the industry and the Company's competitors. + Ability to multitask and perform duties outside of the scope of work when necessary. **Preferred Education, Experience, and Qualifications** + N/A **Travel Requirements** + 5-10% of time will be spent traveling to job site(s)/office location. **Physical Activities** + Ascending and descending ladders, stairs, scaffolding, ramps, poles + Climbing stairs. + Moving self in different positions to accomplish tasks in various environments including tight and confined spaces + Repeating motions that may include the wrists, hands and/or fingers + Remaining in a stationary position, often standing or sitting for prolonged periods **Environmental Conditions** + Outdoor elements such as precipitation and wind + Noisy environment + Low temperature + High temperature + Small and/or enclosed spaces **Physical Demands** + Medium work that includes adjusting and/or moving objects up to 50 pounds ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law. Submit a Referral (******************************************************************************************************************************************** **Job Locations** _US-LA-Metairie_ **ID** _2026-8989_ **Category** _Skilled Craft_ **Position Type** _Full-Time_ **Remote** _No_

Primary Responsibilities Responsibilities include performing electrical tasks safely including installation, troubleshooting, maintenance, testing, repairs on all plant electrical, electronic, and PLC equipment, and corrective and preventative maintenance. Behavioral Profile The candidate must be willing to learn, grow, and work independently and with others. He/she must be flexible, self-motivated with a can-do attitude, and be detail and action oriented. He/she must also demonstrate prioritization skills, the ability to multitask, cross-train, be committed to quality, and work with a sense of urgency. Job Qualifications The ideal candidate should have a high-school diploma or equivalent, 3 years of experience in industrial/electrical maintenance, and experience working in an industrial environment. The candidate must have knowledge of AC and DC power and control circuits, three-phase power circuits, and VFDs. Experience and understanding of PID process control loops and associated equipment is also required. The candidate must demonstrate mechanical aptitude, the ability to grasp complex concepts easily and pay attention to detail. Additionally, he/she must demonstrate an outstanding attendance record and verbal and written communication skills. Benefits Some of the benefits our team members enjoy include the following: * Healthcare- Legacy Health & Wellness and Legacy Pharmacy * Wellness Program * Flexible Spending Account * Additional Insurance * Paid Time Off * Retirement * Chaplaincy Services * Education About RoyOMartin At RoyOMartin, people are our number-one asset. We are committed to keeping them safe and supporting them as they learn and grow. There's just something unique about being in the people business: Our leaders are involved in daily operations and nurture personal relationships; our employees stick with us for the long term and appreciate our top-notch benefits, and we believe that everyone has the capacity to succeed. With superior product quality and outstanding customer service at the heart of our more than 1,200-person operation, RoyOMartin is proud to serve America's building industry. Through our Forest Stewardship Council (FSC) certification, customers can be assured that we responsibly source our raw materials from regional forests to produce "Made in the U.S.A." oriented strand board (OSB), plywood, timbers, and boards in safety-award-winning manufacturing environments. RoyOMartin is an Equal Opportunity Employer.

Job Description In 2019, T. Parker Host acquired United Bulk Terminals (UBT) on Mile 55 of the Mississippi River as one of the largest bulk terminals in the U.S. Gulf, specializing in coal and petcoke. This 1,200 acre property in Davant, Louisiana is capable of extensive loading, discharging and storage - with deep-water docks, fleeting capacity for 500 barges and over 40 pieces of heavy equipment to handle cargo loads. Since the acquisition, HOST has made extensive improvements in systems and equipment, making the facility safer, more environmentally friendly, and more efficient to better serve our customers. Position Summary: Install, maintain, diagnose and repair equipment/instrumentation related to the unloading, loading, transfer and storage of cargo including conveying equipment, AC and DC motors, PLCs and IO modules, VFDs and DC Drives, associated wiring and power supplies on ship loaders, stacker/reclaimers, continuous barge unloaders, bucket cranes and various support equipment. Essential Responsibilities and Duties: Diagnose and repair equipment various equipment used to transfer cargo to/from barges and vessels by use of conveying equipment Work from blueprints, wiring schematics, manuals or verbal instructions Perform preventive maintenance on all terminal equipment Complete work in a safe and timely manner in compliance with company and regulatory requirements Safely operate various types of equipment related to transfer of cargo for testing purposes Perform routine inspections on assigned equipment and report finding in accordance with policy and procedures Accurately document information generated in support of operations to include but not limited to: receiving, shipping and storage of bio-mass. Maintenance inspections and safety related reports. Participate in and successfully complete required training and related testing Identify, report, and correct safety and environmental concerns. Perform any other terminal functions as trained, requested and instructed by supervision. Education, Knowledge, Experience, Skills and Abilities Required: High School Graduate or equivalent required. 5 years of prior industrial electrical experience. Master Electrician-level knowledge/experience in troubleshooting at a component level of industrial electronic controls: VFDs/DC drives, PLCs, HMIs, industrial networks, and associated wiring. Working knowledge of Ohm's Law. Experience with Emerson (formerly GE) RX3i controllers and Machine Edition software preferred. Ability to attain and maintain a Transportation Workers Identification Credential (TWIC). Support Operations through the installation, programming, start-up and maintenance of electrical, automation and process control equipment Responsible for installation, programming, calibration, preventive maintenance, troubleshooting, and repair of electrical and automation equipment in order to improve plant system operation/uptime and reduce total operating costs Support all types of facility systems including Emerson PLCs, Control Techniques VFDs and DC Drives, SEL MV control and monitoring, bulk cargo belts scales, wireless radios and related equipment, 120v-4160v motor controls, and others. Experience with Medium Voltage motors and starters preferred. Successful applicant will work closely with Operations, Engineering, Maintenance, Information Technology Groups Thoroughness and attention to detail are required as a significant amount of time may be spent working with complex PLC programs and advanced process control systems Will be subject to overtime and call-out work as needed. Other tasks may also be assigned to support Operations as necessary Successful completion of background check. Ability to maintain regular, dependable attendance. Physical Requirements: Must meet “fit for duty” requirements upon job offer (pre-employment physical and drug test) The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces Ability to lift up to 50 pounds and work at protected heights up to 130 feet. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Perform work in dusty environment and all types of temperature/weather conditions. HOST, and its affiliated companies, is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. For more information, please visit ******************* or Apply Online Here