Journeyman lineman jobs in Aurora, CO - 92 jobs

About CORE CORE Electric Cooperative is the largest member-owned electric distribution cooperative in Colorado dedicated to providing reliable, affordable, clean, and safe electric service to our communities. With a commitment to innovation and member satisfaction, we strive to meet the evolving needs of our members while maintaining the highest standards of service excellence. Job Summary Responsible to the Line Superintendent for the performance of labor necessary for the construction and maintenance of electrical distribution and transmission lines. Essential Duties and Responsibilities Duties are semi-routine involving an intensive practical knowledge of duties related to electric power lines. Most duties are performed within the limits of standard practice but there are occasions where a variety of procedures could be used and judgment must be considered to determine what action should be taken. A supervisor may not always be present, thus requiring independent action by the Lineman. Supervision is provided by the Line Superintendent to ensure that all job requirements are accomplished. When working on a crew, general guidance and direction are received from the Working Foreman. When engaged in service work, the employee plans and arranges own work receiving only general direction from the Working Foreman and or the Line Superintendent. Contacts with others are considerable as a Lineman's responsibilities call for contact with consumers and members. These contacts can influence the members' opinion of the Cooperative. Connects and installs all standard types of single-phase and three-phase self-contained metering and service drops. Reads kilowatt hour and demand type meters. Completes Lineman portion of various types of service orders. Disconnects meter or service on delinquent accounts in accordance with Cooperative's rules and regulations. Collects money from consumers. Understands and uses Cooperative location numbers and maps. Determines causes of problems and restores electric service to normal. Installs, removes, and repairs street and yard lights. Locates underground electric cable. Reports potential or existing problems or hazards on the Cooperative's electric system to supervisor. Uses two-way radio in accordance with CORE's procedure. Patrols transmission and distribution lines. Trims and removes trees. Inspects and notes abnormal conditions of oil-filled equipment. Installs various types of recording meters on distribution and secondary lines. Uses proper procedures and account numbers when filling out daily time sheets and material use tickets. Uses safe working habits and follows Cooperative's safety rules at all times. Maintains in good condition all personal tools and equipment as well as assigned Cooperative equipment, tools, and vehicles. Frames poles, installs guys, strings, and ties in conductor. Works on energized conductors - Rubber gloves 12.5 kV from a bucket truck. o Hot sticks up to and including 115 kV from poles. Installs, removes, and makes minor repairs and adjustments on oil-filled switchgear, regulators, capacitors, and transformers. Constructs various types of three-phase transformer banks. Understands the proper use and completion of small purchase orders. Responds to call-out at all hours, including holidays and weekends in order to restore or maintain electric service to consumers. Employee must reside no more than 40 road miles from their respective district office. Performs other duties as directed. Minimum Qualifications of Position A high school diploma or equivalent is required. Completed a four-year accredited apprenticeship training program as a Lineman or in the construction and maintenance of electric transmission and distribution lines; or experience as a working journeyman. A valid unrestricted class A Colorado Commercial Driver's License and a DOT medical certificate are required and must be maintained. This position is subject to DOT controlled substances and alcohol testing regulations. Knowledge and Skills This job requires careful and strict mental and visual attention, especially when working with high voltage lines. Basic aptitudes in numerical ability, numerical reasoning and spatial awareness are also required. Working Conditions and Physical Requirements The duties and tasks require the ability to routinely lift 50 pounds and occasionally lift a maximum of 100 pounds. Walking or hiking for long distances through snowy, muddy, slippery, steep, and rocky terrain carrying tools and equipment. Driving or operating all types of equipment for extended periods of time in all types of conditions, including very hot, cold, wet, and windy weather. Sitting or kneeling for extended periods of time while operating a snowmobile or splicing URD cable. Driving a truck or snowmobile over rough terrain encountering jarring and bouncing conditions. Climbing repeatedly and unassisted onto, into and off of diggers, trenchers, buckets, and trucks. Shoveling snow and mud to free equipment. Digging pole and anchor holes in rock with hand tools. Lifting and pounding frost bars, ground rod drivers, and tamps. Extending hands and arms over head for extended periods of time while lifting and setting poles with pole pikes. Pulling out and installing meters above shoulder level. Pulling on ropes and hand lines to lift up to 100 pounds and holding the load in position until secured. Climbing poles repeatedly with belt and hooks carrying tools and hardware. Stretching and twisting the body to tie in wire on crossarms, install hardware and operate hoists and other tools while standing on hooks. Working with tools and small parts such as bolts, nuts, washers, and pins while wearing rubber gloves. Using a fully extended with weight on the end when changing fuses and operating switches. Climbing and balancing on ladders. Rolling poles on a framing gin with a cant hook. Changing small and large truck tires unassisted. Bending and stooping to load and unload OCRs, transformers and other equipment and hardware. Working conditions are primarily outside, including possible isolated work areas, call-out at all hours and exposure to adverse weather conditions. Employee may be exposed to toxic materials, including PCB. Note: This job description is intended to describe the general nature and level of work performed and is not to be construed as an exhaustive list of responsibilities, duties, and skills required. Other duties may be assigned. The application deadline for this job is estimated to be 1/30/2026. However, this timeline may be shortened or extended depending on business needs, the availability of qualified candidates, and whether the role is filled or not. We encourage qualified candidates to submit their application(s) expediently so as not to miss out on opportunities. CORE offers a comprehensive benefits package including the following... 9/80 work schedule: every other Friday off! Nine paid holidays per year 160 Hours of accruable PTO per year Paid parental leave Education and training reimbursement 100% Cooperative paid benefits, including: Defined benefit pension plan Medical insurance Dental insurance Vision insurance Short term disability Long term disability Employee assistance program Life insurance HSA with employer contribution 401(k) with company match up to 4%. Immediately 100% vested Length of service program Free Onsite EV charging stations (at certain locations) Onsite micro market (at certain locations) Onsite gym with golf simulator and massage chairs (at certain locations) CORE is an Equal Opportunity Employer. EEO is The Law - click here for more information Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled We consider all applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, handicap or disability, or status as a Vietnam-era or special disabled veteran in accordance with federal law. If you need assistance, please reach out to us at ************

Are you looking for an exciting job where you can put your skills and talents to work at a company you can feel proud to be a part of? Do you want a workplace that will challenge you and offer you opportunities to learn and grow? A position at Xcel Energy could be just what you're looking for. We anticipate the need for one or more Journeyman Lineman to be located in Evergreen, CO. The starting rate of pay for this position is $63.95 hourly. Summary Perform the duties of lineman classification involving overhead and underground electric distribution systems. Special Instructions: 1. The successful candidate must have the physical ability, endurance, and desire to perform potentially strenuous outdoor work, at all times of the day and night, and under various weather conditions. 2. The successful applicant will be expected to respond to emergency callouts after normal work hours and on weekends. 3. The successful applicant must live within 40 minutes/40 miles of the Evergreen Service Center. 4. The successful candidate must be able to perform safe, proficient, and effective pole-climbing. 5. Applicants must be self-motivated, work well with others, have a positive attitude, and be committed to working safely and productively. For External and Non-Xcel Energy Journeyman candidates, verification of Journeyman Lineman qualifications and knowledge will include written testing and/or practical skills evaluation during the application process. Minimum Requirements High School diploma or equivalent. Valid Class A CDL driver's license including a valid Medical Examiner's Certificate. All applicants must have completed a qualified apprenticeship program and possess a Journeyman Lineman certification. Must be willing to live within 40 minutes/40 miles of the Evergreen Service Center. Must have a well-rounded knowledge of distribution primary feeder circuits, transformer loading and connections, and fusing practices. Should have experience with electric meter sets and their connections. Must have knowledge and experience in the use of hot line tools, protective devices, fuses, lightning arresters, disconnect switches, breakers, grounding sets, transformers and their connections. Must be experienced in the operation of Line Construction and Maintenance vehicles including, but not limited to, forklifts, digger-derricks, platform digger units, wire and rope tensioning units, and other similar equipment. Must demonstrate knowledge and experience in electric Distribution system troubleshooting. Must be thoroughly familiar with the Safety Rules and regulations of the Company and must be well acquainted with the hazards involved in electric Distribution field service work. Must be familiar with the use of rubber gloves, sleeves, line hose, and switching procedures, as well as in the use of PPE in accordance with Company and OSHA requirements. **NOTE: This position requires an assessment prior to being considered for an interview so please read the following instructions carefully: Assessment Information Step 1 Application and Online Assessment: 1. Create a profile by applying for a position 2. Apply to the job posting 3. Should you meet the minimum qualifications, you may receive an invitation to complete an online assessment. Please follow the assessment instructions carefully and complete the online assessment within 72 hours. Step 2 Selection Process: 4. Please allow a couple of weeks for assessment results and applications to be reviewed. You will be notified if you are selected for an interview. 5. If you are not selected for an interview, you will receive notice that the hiring leader has chosen to go with another candidate. 6. If you do not successfully complete the assessment, you are eligible to re-take it after 6 months. Step 3 Lineman Test: 7. If selected for the next step you will be required to pass the Xcel Energy Journeyman Lineman test. 8. This will be conducted on-site. As a leading combination electricity and natural gas energy company, Xcel Energy offers a comprehensive portfolio of energy-related products and services to 3.4 million electricity and 1.9 million natural gas customers across eight Western and Midwestern states. At Xcel Energy, we strive to be the preferred and trusted provider of the energy our customers need. If you're ready to be a part of something big, we invite you to join our team. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Individuals with a disability who need an accommodation to apply please contact us at *************************. BargainingThe anticipated starting base pay for this position is: $63.95 per hour This position is eligible for the following benefits: Medical/Pharmacy Plan, Dental, Vision, Life Insurance, Health Care Reimbursement Account, Health Savings Account (HSA) (if enrolled in eligible health plan), Limited-Purpose FSA (if enrolled in eligible health plan and HSA), Long-term disability (LTD), Employee Assistance Program (EAP), Fitness Center Reimbursement (if enrolled in eligible health plan), Tuition reimbursement, Employee recognition program, Pension, 401(k) plan, Vacation, Holidays, Personal Leave, Sick Time, Volunteer Paid Time Off (VPTO) Benefit plans are subject to change and Xcel Energy has the right to end, suspend, or amend any of its plans, at any time, in whole or in part. In any materials you submit, you may redact or remove age-identifying information including but not limited to dates of school attendance and graduation. You will not be penalized for redacting or removing this information. Deadline to Apply: 01/28/26 EEO is the Law | EEO is the Law Supplement | Pay Transparency Nondiscrimination | Equal Opportunity Policy (PDF) | Employee Rights (PDF) All Xcel Energy employees and contractors share responsibility for protecting the company's information and systems by adhering to cybersecurity policies, standards, and best practices, recognizing that cybersecurity is everyone's responsibility. ACCESSIBILITY STATEMENT Xcel Energy endeavors to make *************************** accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact Xcel Energy Talent Acquisition at *************************. This contact information is for accommodation requests only and cannot be used to inquire about the status of applications.

Commercial Flooring Services is seeking Installation Apprentices to grow with our expanding organization. We specialize in fast-track schedules, large scale commercial projects, and occupied healthcare renovations. Commercial Flooring Services has been established in the area for over twenty years and our in-house installation team is arguably the best in all of Colorado. As an Apprentice, you will be trained and certified to assist in the installation of Carpet, Sheet Vinyl, and Ceramic Tile for large commercial flooring projects. With over 60 full time employees we can take on projects of any size with ease, while maintaining a reputable presence in the industry for delivering the best installation and quality services.

For over 40 years, FSG has helped businesses of all sizes with lighting, electrical, signage and technology. But it is not what we do that makes a difference; it is why we do it. Pay range USD $35-41 per hour. Plus, we offer yearly bonuses! FSG offers medical, dental, vision and life insurance and 401K with company match. Hours are Monday - Friday 7:00 a.m. - 4:00 p.m. with possible overtime as required. WE OFFER PTO Medical (free for the employee), Vision, Dental and Life benefits Company Provided Vehicle Company Gas Card 401K with Matching Contribution Monthly Phone Allowance Job Description As a Journeyman Electrician, you will plan layouts and install and repair wiring, electrical fixtures, apparatus, and control equipment. The ideal candidate will mentor and develop Apprentice Electricians as well as promote the core values of FSG through excellent customer service and assuring the safety of all work. Duties and Responsibilities Prepares sketches showing the location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications, safety codes and local electrical codes. Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes. Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels; installs Buss, Busbar, electrical feeders, power systems and/or switchgear. Repairs faulty equipment or systems. Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures. Advise management on whether continued operation of equipment could be hazardous. Meets attendance standards and complies with late/absence notification procedures. Maintain current electrician's license or identification card to meet governmental regulations. Qualifications High School Diploma or GED Current Colorado Electrician's License. Three to five years of experience in the field Valid driver's license Ability to multitask while staying organized Strong verbal and written communication skills Positive customer service skills Experience in lighting is a plus! #hc171106

Plumbline Services is currently seeking Water Treatment Installers to join our team! Stability with a strong, large, ever-growing company that makes you feel like family! Our Water Treatment Installers install RO and whole water treatment systems, maintain, diagnose and repair equioment and maintain a clean, organized truck. What's In It For Me? * Compensation Range $24 - 30 / hr. depending on experience * Employer Sponsered Health Insurance for you AND your family * Vision and Dental plans for you and your family to choose from * 401K Retirement Plan with company match * Life Insurance, Short-Term and Long-Term Disability * Special Program Options: HSA * Continuous Training for your Professional Development * Working in a dynamic, collaborative, and fun environment About Plumbline Services: In everything we do, whether it's in the office or in your home, we strive to do what's right. But what does "right" mean to us? What standard are we measuring ourselves against? The answer is hidden in our company's name. A "plumb line" is a string attached to a weight. Its purpose is to ensure that something is upright and straight. It provides an objective standard against which one can measure what he has built. Our "plumb line"-our test for doing what's right-is doing what's true, fair, and upright. These values inhabit every nook and cranny of Plumbline Services. Meaning these are the values we hire by. And-most importantly for you-live by. Learn More About Us!******************************************* Responsibilities What Will I Do? * Install reverse osmosis and whole house water treatment systems * Maintain, diagnose, and repair of residential and water treatment equipment * Maintain good working order of company vehicle, parts, tools, and safety equipment * Identify and proactively respond to potential opportunities for additional business * Document installed equipment, generate appropriate customer invoices and other paperwork at the job site and electronically process credit card transactions * Participate in company-provided training opportunities Qualifications Do I Have What It Takes? * Plumbing experience servicing and installing water treatment equipment preferred, not required * Good analytical skills and attention to detail * Excellent interpersonal and customer service skills * Ability to work independently in a timely manner, ensuring the job is done correctly the first time * Clean driving record and valid driver's license * Ability to pass a background check and pre-employment drug screen * Ability to lift, carry and maneuver a minimum of 100 pounds without additional manpower or appropriate device * Work in the outside elements of heat and cold safely We accept applications for this role on an ongoing basis. Wrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The company encourages all qualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally.

Department: Production Employment Type: Full-Time Compensation: $21 - $22 VPI Compounding, a leader in pharmaceutical innovation, is looking for an enthusiastic individual to join our team as a Cleanroom Apprentice. This entry-level position offers a rate opportunity to begin a rewarding career in pharmacy, with full training provided. The Cleanroom Apprentice will support cleanroom operations while gaining the skills to grow into a Compounding Technician role. Key Responsibilities: Glassware Processing: Clean and sterilize laboratory glassware to support top-tier production. Equipment Preparation: Wash and prep essential lab equipment. Team Support: Assist Cleanroom personnel with daily operations. Materials Transport: Move supplies and materials between work areas to keep operations efficient. Cleanroom Maintenance: Ensure the cleanroom remains pristine, organized, and fully stocked. Safety Compliance: Learn and follow all safety protocols to maintain a safe and efficient environment. Required Qualifications: High school diploma or equivalent. Strong attention to detail and organization. Positive attitude and excellent teamwork skills. Willingness to learn and grow. Ability to stand and be on your feet for 8+ hours. Must be prepared to apply for a Provisional Technician License upon hire. Preferred Qualifications: Previous experience in a laboratory, pharmacy, or cleanroom setting (not required). Demonstrated reliability and consistency in fast-paced environments. Who Should Apply? If you're eager to start a career in pharmacy, enjoy hands-on work, and want to contribute to creating custom medications that improve patient care, this is the role for you. No prior experience is necessary - just a willingness to learn and grow with us. Benefits: Company-paid health, dental, and vision insurance. Competitive pay and performance-based incentives 401(k) plan with employer match Paid holidays, floating holidays, and Paid Time Off (PTO) Tuition and Certification reimbursement programs to support continued learning and professional growth RTD EcoPass for convenient commuting Career growth opportunities, including the potential to advance into a Compounding Technician role. Equal Opportunity Employer VPI is an EEO. It is the policy of VPI to ensure and provide equal opportunity for all qualified persons employed by or seeking employment with VPI without regard to race, color, creed, religion, sex, sexual preferences, national origin or ancestry, age, marital status, veteran status, or non-job-related handicaps. This policy extends to all areas of employment, including, recruitment, job assignment, promotion, training, compensation, benefits, and other terms and conditions.

Learn various aspects of the tennis pro role without being USPTA or PTR certified, with the intention of growing professionally and eventually earning certification. Teach private and group tennis lessons and successfully implement Life Time's Play Learn Love, and SMART (Juniors) methodology. Embrace and execute student centered learning and rally based teaching. Grow your book and revenue to meet and exceed personal and department financial goals. Demonstrate member centric customer service to encourage repeat business and referrals. Job Duties and Responsibilities * Monitors, demonstrates, and instructs students during tennis lessons on proper techniques, tactics and strategies to improve their overall tennis game * Develops safe, professional, and comprehensive tennis lessons and programs to ensure students develop along a pathway that will encourage continued involvement and a positive Net Promoter Score * Creates exceptional member experiences by involving members with programs, tournaments and special events, fully utilizing available marketing support and tools, and ensures all tennis facilities and equipment are clean, organized and in good working condition * Participates in the system wide sales effort with Membership Advisors and Member Activities, ensuring tennis is an integral component of the Life Time brand. Attends department and "all club" meetings Position Requirements * High School Graduate or Equivalent * CPR and AED Certified within 30 days of hire * Excellent customer service skills, friendly, outgoing, and positive attitude * Thorough knowledge of the game of tennis and possesses effective teaching styles and techniques * Excellent communication, time management, and organization skills * Comfortable working with all age groups and building positive relationships with members and team members * Ability to sit, stand, walk, reach, climb and lift up to 50 pounds Preferred Requirements * Bachelor's degree in related field Benefits All team members receive the following benefits while working for Life Time: * A fully subsidized membership * Discounts on Life Time products and services * 401(k) retirement savings plan with company discretionary match (21 years of age and older) * Training and professional development * Paid sick leave where required by law Full-time Team Members are eligible for additional benefits, including: * Medical, dental, vision, and prescription drug coverage * Short term and long term disability insurance * Life insurance * Pre-tax flexible spending and dependent care plans * Parental leave and adoption assistance * Paid time off, including 5 to 20 vacation days per calendar year (based on tenure) and paid sick leave * Deferred compensation plan, if the team member meets the required income threshold Life Time is a place for everyone. As an organization, we are committed to an inclusive, diverse and equitable workplace that respects and celebrates the unique contributions of each individual while ensuring we remain an equal opportunity employer that recruits, hires, trains and promotes based on merit and qualifications.

Job Description The purpose of this position is to assist with daily sales activities while learning about our products, sales process, and company culture. This will be achieved by working closely with the sales manager and other departments to efficiently complete all steps of the sales process. The aim of this position is to learn the skills and knowledge needed to successfully transition into a full-time retail sales rep position. Bachelor's Degree required. Must also have (or be capable of obtaining) a Colorado Commercial Driver's License, Class C with passenger and air brake endorsements. Operation of Microsoft Office programs and Microsoft Office are imperative. Our industry is complex, and the ability to absorb and develop product knowledge is crucial to success. Having an attention for detail is a requirement. Being a self-starter is also a benefit. This position will work closely with the retail sales manager and sales administrators to learn and assist with daily sales responsibilities. This may include clerical work, maintaining our CRM and DMS systems, preparing items for tradeshows and assisting with local deliveries. This position is designed to expose the employee to as many aspects of Davey Coach as possible in preparation of them becoming a sales rep. Typical hours are 8:00am-5:00pm, Monday-Friday. Some travel to our California and Indiana locations may be required as well as attending conferences across the country which could mean weekend travel (maybe once or twice per year). It takes a patient of person, with a strong engineering background to be successful at sales, and the purpose of this position is to get you in shape to thrive in the retail sales world. Physical Demands / Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Working conditions are normal for a fast-paced office work environment. On-site work is expected. · Occasionally working in an automotive mechanical environment. · Mid-level stress. · Requires sitting for long periods of time (frequently). · Requires periodic walking primarily on a level surface throughout the workday. · Requires reaching continually throughout the workday (mouse, keyboard, telephone). · May include lifting up to 50 pounds for files on a regular basis. Proper lifting techniques required. · Setting up tradeshow booths (table cloths, banners, brochures, giveaways, etc.) Material and Equipment Directly Used: · Personal computer with Microsoft Office software applications. · Mouse and keyboard. · Software applications including diagramming, project management, and configuration tools. · Telephone headset (occasionally). · Facsimile (occasionally). · Multi-line telephone with voice mail. · Copy machine and printer. · Calculator. · Driving Vehicles. Our equipment must be driven to be shown. Pay Range: $24 - 28 per hour Powered by JazzHR SVyJlEuo2C

Design Mechanical, Inc. a Comfort Systems USA company In Colorado, we have two locations - Louisville, our corporate headquarters, and Breckenridge with a combined 400 employees. Locally, we are a small family environment, and nationally, as part of Comfort Systems USA, we are one the largest Mechanical Contractors with excellent benefits packages, competitive pay structures, career progression, and more. Job Title: Sheetmetal Apprentice Department: Sheetmetal Reports to: Labor Manager FLSA Status: Non-exempt (Eligible for OT) Location: Denver, CO Wage Range: $20-28/hourly Benefits Included: Comprehensive Medical, Dental, Vision, FSA/HSA, Matching 401K, Long Term Disability, Short Term Disability, Company Paid Life & Voluntary Spouse & Child Insurance, AD&D, Employee Assistance Program, PTO, Paid Holidays, voluntary additional insurances/benefits, and other great perks. : Perform entry-level general pipefitting duties as required with supervision. Progress through the trade Responsibilities: Basic math skills Trained to understand and operates all machinery Understands terminology, preps ductwork for installation, has basic hand tools as per tool list, and can properly use them Attends all Design Mechanical's Apprenticeship training classes regularly and outside schooling, if available Develops good housekeeping and safety habits Responsible for accurate material checkout from warehouse and labor accounting Attentive to following instructions and has a positive attitude toward leadman, fellow employees, and customers Can document approximately 2,000 hours of employment Perform laborer tasks including such duties as sweeping, cleaning, delivering, loading, unloading, hole cutting, etc. Other duties as assigned APPRENTICE 2 (12-24 months) $23-24/hr All Apprentice 1 responsibilities and be able to: Read non-complex blueprints, detail shop orders from prints, and onsite measurements Install HVAC systems with minor supervision Set up and operate all job-related tools safely Fabricate duct and simple fittings Understand the fundamentals of heating, ventilating, and air conditioning Flat solder copper and galvanized joints, properly water seal duct joints, and OSM joints Be willing to help solve installation problems Document approximately 4,000 hours of employment Other duties as assigned APPRENTICE 3 (24-36 months) $25-26/hr All Apprentice 1 and 2 responsibilities and: Do all types of small jobs alone with supervision including add-on air conditioning, furnace change-outs, humidifiers, air cleaners Can install all types of normal residential, commercial, and industrial HVAC systems with supervision. Able to impart trade knowledge to and lead a helper Can coordinate work with customers and other trades Can weld light gauge sheet and lightweight angle iron frames Can complete jobs successfully in terms of labor and material budgets Can document approximately 6,000 hours of employment Other duties as assigned APPRENTICE 4 (36-48 months) $27-28/hr All Apprentice 1, 2, and 3 responsibilities plus: Application for certification at local jurisdictions as required Know fundamental design and can successfully complete all jobs as per Design Mechanical's standards Can document 8,000 hours of employment Support the total quality effort. Identify and respond to the needs of internal and external customers 100% of the time Work within the guidelines of the safety and employee policy Upon graduation, obtain Denver Journeyman Heating and Ventilating Certificate Other duties as assigned Qualifications: Minimum 18 years of age High school graduate/GED Mechanical aptitude Willingness to learn through on-the-job training and technical school courses Reliable transportation to and from work required What we offer you: Career Path Development and certifications needed/required Vendor/Manufacturer Training, as well as Safety and Task Training Design Mechanical, Inc. is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage, and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines. While performing the duties of this job, the employee is regularly required to: Have a full range of mobility in the upper and lower body Be able to reach overhead Be able to work a full range of physical activities in various positions, including, but not limited to, stooping, standing, bending over, kneeling and squatting, climbing, walking for extended periods of time Be able to lift, pull and push materials and equipment to complete assigned job tasks Be able to lift 70 pounds of weight frequently throughout the assigned workday Capable of hearing at a level or correctable to a level where the person can receive detailed information through verbal communication. Vision must also be at a level or correctable level where the person has clarity both in short and long-distance vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to outdoor weather conditions. The noise level in the work environment is usually loud. One will be exposed to dirt, noise, temperature extremes, vibrations, dampness, equipment movement, hazards, chemicals and solvents, lightning, ice, snow, and work at night and in the dark. The person will be expected to be free from fear of heights and can work at heights on ladders and scaffolds. Some work may occur in confined spaces. This Job Description is not a complete statement of all duties and responsibilities comprising this position and may change with or without notice. Design Mechanical, Inc. is not open to third-party solicitation or resumes for our posted FTE positions. Resumes received from third-party agencies that are unsolicited will be considered complimentary.

Job Title: Journeyman Electrician - Batch & Concrete Plant Focus Join WW Clyde - Where You Work Matters At WW Clyde, we build more than infrastructure-we build careers. For over 90 years, we've delivered challenging heavy civil projects. Our reputation for safety, innovation, and quality is driven by our people. We invest in your growth, empower you with the latest technology, and provide clear pathways for advancement. Job Summary: The Journeyman Electrician will be responsible for installing, maintaining, and repairing electrical systems with a primary focus on Batch Plants and Concrete Production Plants within heavy civil construction environments. This role requires specialized knowledge of electrical systems that support the continuous and reliable operation of ready-mix concrete, portable batch plants, and associated equipment. The electrician will work independently or as part of a team to ensure all systems meet safety, efficiency, and compliance standards. This position must be willing to travel across Western States including Utah, Arizona, Colorado, Nebraska, Wyoming, New Mexico, Oklahoma and Nevada. Key Responsibilities: * Install and repair electrical systems in Batch Plants, Concrete Plants, and Aggregate Production Facilities, including wiring, motors, control systems, and electrical panels. * Perform regular maintenance and inspections to ensure optimal performance and minimize downtime at Concrete and Ready Mix Plants. * Troubleshoot and diagnose issues specific to batching equipment, mixers, conveyors, water systems, and automation controls used in concrete production. * Read and interpret complex electrical schematics and blueprints related to Concrete, Ready Mix, Batch Plants, and supporting infrastructure. * Ensure all work complies with national and local electrical codes, safety regulations, and company standards. * Collaborate with plant operations and maintenance teams to identify electrical needs and provide recommendations for improving plant performance and safety. * Train and mentor apprentices or less experienced electricians, particularly in the specialized requirements of Concrete Batch and Ready Mix operations. * Maintain a clean and safe work environment, especially around high-voltage equipment and heavy machinery. Qualifications: * Completion of an apprenticeship program and Journeyman Electrician certification. * 3+ years of electrical experience, preferably with a strong background in Concrete Plants, Portable Batch Plants, and Ready Mix operations. * Proven ability to troubleshoot complex electrical systems in high-production environments. * Experience with automation, sensors, and control systems specific to batching and mixing processes. * Familiarity with tools and equipment used in heavy civil and concrete plant maintenance. * Strong analytical and problem-solving skills. * Excellent communication and teamwork capabilities. * Ability to work at heights, in confined spaces, and in varied field conditions. * Valid driver's license and reliable transportation. * Willingness to travel across Western States including Utah, Arizona, Colorado, Nebraska, Wyoming, New Mexico, Oklahoma and Nevada. Physical Requirements: * Ability to move up to 100 lbs. repetitively. * Frequent bending, standing, lifting, climbing, and ongoing physical activity. * Regular exposure to outdoor elements. Why Work for WW Clyde? * Competitive Compensation & Benefits: Health, dental, vision, life insurance, 6% 401(k) match, profit sharing, paid holidays, and PTO. * Performance-Based Bonus: Rewarding your dedication and project success. * Career Development: Ongoing training, mentorship, and clear advancement paths. * Stable, Respected Employer: Join a century‑strong leader in heavy civil construction. * As part of our hiring process, all candidates are subject to a comprehensive background check. Please note that our company maintains a strict policy regarding certain convictions. Applicants with a DUI or felony conviction may not meet eligibility requirements for employment in this position..* Posting Closes: Open until filledW.W. Clyde and Co. is an Equal Employment Opportunity/Affirmative Action Employer. * Job Type: Full-time * Pay: $90,000 - $110,000/annually

Imagine. Create. Transform.Yellowstone Local is proud to represent McBride Lighting & Electrical Services, an industry leader in electrical solutions. If you're a licensed Journeyman Electrician looking to join a company that values your work and helps you build a real career, this might be the opportunity you've been waiting for. What's in it for You? Competitive Pay: $75,000 - $80,000 per year, depending on experience Additional Earning Potential: Opportunities for prevailing wage projects Health Benefits: Medical, dental, and vision insurance with employer contribution 401(k) Retirement Plan: Company match available Paid Time Off: Take time to rest and recharge Company Vehicle & Gas Card: Provided for work-related travel Training & Development: Ongoing education and certifications paid for by the company Career Advancement: Clear paths for professional growth and leadership Why You'll Love It Here McBride Lighting & Electrical Services has been serving Colorado communities since 1956. We take pride in doing quality work, supporting our team, and creating a workplace where people can build long-term careers. Here, you'll be respected for your trade skills, supported by leadership, and surrounded by a dependable team that takes pride in their work. Your New Role We're hiring a Journeyman Electrician based in Golden, CO to work on residential and commercial projects across the Denver metro area. You'll be performing installations, maintenance, and service work, bringing power and solutions to homes and businesses in the community. Key responsibilities include: Performing electrical installations, repairs, and upgrades for residential and commercial projects Troubleshooting and diagnosing electrical systems and components Ensuring all work meets local and national electrical codes Communicating clearly and professionally with clients and team members Supporting project timelines and occasionally leading smaller job sites Assisting with the training and development of apprentices Maintaining accurate records of work completed Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Valid Colorado Journeyman Electrician License 4 - 6 years of electrical experience in a journeyman role (preferred) Working knowledge of NEC codes and local building regulations Ability to read blueprints and technical diagrams Strong troubleshooting and problem-solving skills Valid driver's license and clean driving record Ability to pass a background check and drug screening (for school-related projects) Authorized to work in the United States McBride Lighting & Electrical Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #orange

Join Solar Works Energy, the largest residential solar installer in New Mexico is now in Colorado! We are looking for a licensed Journeyman Electrician to help us continue delivering top -tier solar energy solutions to our customers. This is your opportunity to work with a fast -growing company in the solar industry, providing stable employment and opportunities for advancement. What We Offer: Competitive pay of $35 -40/hour Full -time, stable employment with New Mexico's largest residential solar installer Opportunities for career growth in the rapidly expanding solar industry Positive and supportive work environment Paid training on solar installations and safety protocols Responsibilities: Install, maintain, and troubleshoot solar PV systems for residential and commercial projects Ensure all electrical systems comply with local and national electrical codes Collaborate with solar installation teams to complete projects efficiently and safely Diagnose and repair electrical issues related to solar systems Perform regular maintenance and inspections of solar power systems Work with customers to provide excellent service and answer technical questions Requirements Valid Journeyman Electrician License Proven experience in electrical installation, repair, and troubleshooting Knowledge of local and national electrical codes Ability to work independently and within a team Strong attention to detail and commitment to safety Prior experience with solar systems is a plus, but not required (training provided) BenefitsWhy Solar Works Energy? At Solar Works Energy, we are passionate about making a difference in our community by providing clean, renewable energy solutions. With our focus on teamwork, innovation, and excellence, we create an environment where our employees can thrive and grow in their careers. We also value work -life balance and a positive company culture, which is why we invest in our team's growth and well -being.

Mission Statement: "Serve our Customers with Integrity by Providing Electrical Solutions that are Cost Effective and Safe, While Offering Rewarding Opportunities to our Employees to Develop and Apply their Skills." Journeyman Electrician Install safe, code compliant electrical systems on Excel Electric projects that adhere to the specifications set forth in project contract documents and drawings. Reports to the Project Manager. Advises Project Manager or Warehouse Manager of material and tool needs. Responsible for implementation of Excel Electric policies in the field including safety policy and company rules. Supervises small crews as required or may have responsibility for project(s). Trains apprentices that work on projects under direct supervision. Be on call for emergency customer service. Keep licensing active and training up-to-date relative to job duties and the national electric code. Duties: Represents Excel Electric by upholding our mission through their work and precsence. Executes Excel Electric projects in the field under supervision of a Project Manager or Owner in accordance with code and per manager instructions. Materials Uses materials efficiently. Anticipates needs of materials in advance and coordinates with job foreman. Tools Maintains a neat and orderly job site. Ensures that the correct tool is used for each job. Protects company property by taking the necessary precautions to prevent theft and damage of company property under his direct control. Labor Is dependable. Accurately clocks in/out of time keeping system. Completes and submits required job paperwork to office on a weekly basis. Trains and mentors apprentices. Working Conditions Works easily and skillfully with hands. Maintain physical strength and stamina. Mental and visual attention is necessary to effectively complete work tasks. Climb and maintain balance on ladders, scaffolds and other objects and carry tools and equipment. Reach for, handle, and grasp wires and hand tools. Coordinate the use of eyes, hands, and feet. Manipulate objects and materials. Must be able to stand, stoop, kneel, bend, crouch, crawl, work at heights and work in small places for extended periods of time as required to perform duties. Vision - ability to see details at close range and details at a distance (either manually or with correction) and distinguish colors. Regularly lift and carry objects weighing up to 50 lbs or more. Is prepared to occasionally assist in the response to emergency service calls during off hours. Implements Excel Electric policies in the field including safety policy and company rules. Becomes an expert in the field through continued growth and development of: skills, knowledge, and contacts. Attend company meetings and be an advocate for company policies, including safety, procedures and operations. To learn more about Excel Electric, Inc. visit our website Requirements Qualifications: Should be familiar with electrical field practices as well as industry practices. Should be organized and efficient at completing work tasks assigned. Ability to read and interpret electrical drawings. Must be interested in training future electricians. Possess a current driver's license with an excellent driving record. Possess a current Journeyman or Master Electrician License. Employment Details: Schedule: typically M-F 7:30 am - 4:00 pm Hourly pay Benefits: Available after completion of 90 day probationary period Health, Dental, Vision, Life & Disability Insurance 401k with Company Match PTO Paid Holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Day After Thanksgiving, Christmas Day) Discretionary Bonus

Description The Journeyman Electrician is a critical part of our field team, performing skilled electrical work that directly impacts the success of each project. From installation and layout to troubleshooting and quality inspections, this role ensures systems are built to the highest standards.Working under experienced leadership, you'll have the opportunity to deepen your expertise and grow your influence on the job site. Whether your path leads toward becoming a foreman or being recognized as a technical expert, this role is a key step forward.Journeyman Electricians are highly valued for their knowledge, reliability, and craftsmanship. Their work keeps projects on track, safe, and built to last, making them essential to everything we do in the field. RK OverviewRK Industries (RK) is a second-generation family-owned business built on hard work and strong values. Led by brothers Rick and Jon Kinning, we take pride in delivering a wide range of hands-on services including construction, manufacturing, custom fabrication, and building services. With seven specialized business units working in close coordination, we ensure every job is done right from start to finish. Our proven methods, focus on safety, and commitment to quality help bring our customers' biggest ideas to life. Performs the full range of Journeyman or Master Journeyman level duties for Plumbing, Piping, Sheet Metal, Electrical, Ironworking, and Welding in the construction, finishing, repair, etc. of buildings. Role Responsibilities Perform trade specific tasks on a construction site. Oversee productivity of crew. Ensure schedules and deadlines are met. Perform some layout activities. Perform some material takeoffs as necessary. Trade related material, tool, and equipment requisitions. Perform planned maintenance tasks as assigned. Perform equipment start up with associated documentation. Perform quality control inspections. Technical trouble shooting and diagnostics when needed. Other duties as assigned. Qualifications High school degree or GED preferred or equivalent combination of skills and experience. Journeyman or Master License required. Good physical condition and ability to stand for extended periods of time. Good dexterity and eye hand coordination. Aptitude for technical problem solving. Familiarity with building codes and current laws/regulations. Ability to maintain clean and orderly tools/work area. Good communication skills both verbal and written. Expert knowledge of trade tools, equipment, and materials. Keen eye for detail. Electrical: must be a Colorado licensed Journeyman Minimum Physical Requirements and Accountability Work outside, inside, and in dusty, noisy and hazardous areas. Work in high places, tight places, confined spaces and/or other adverse locations. Climb, balance, squat, kneel and crouch. Comply with all company policies and procedures. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis. RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

Ludvik Electric is a premiere electrical contractor in Arizona, Colorado and Utah with over $2 Billion in installations around the world. We are seeking experienced Electrical Field Management staff for our Colorado Location. Colorado continues to grow and the number of electrical projects we are winning is exploding, and our backlog of projects will keep us busy for years! Education and Experience Six years of documented work in electrical construction with at least 2 years of prior supervisory experience. Ability to lead teams on projects. Colorado Journeyman or Master License Completed three or more projects from start-up to completion as a Foreman or Supervisor. Demonstrated knowledge and application of Supervisor duties, responsibilities and expectations as it applies to size and type of construction project. Demonstrated ability to supervise, evaluate and develop foremen, journeymen and apprentices. Demonstrated quality electrical installation and mechanical abilities. Qualifications Strong Initiative Good Attitude Effective Communicator Team Player Join Ludvik Electric, the premiere electrical contractor today!!

Job Title: Traveling Journeyman Lineman (Non-Union) Job Type: Full-Time, Travel-Based Job Summary: FindTalent is seeking skilled and motivated Traveling Journeyman Linemen for exciting opportunities with a leading construction company specializing in electrical infrastructure. This role involves extensive travel across various states, working on large-scale utility projects. The ideal candidate will have a strong background in transmission, distribution, and substation work, with a commitment to safety and quality workmanship. Key Responsibilities: Install, maintain, and repair high-voltage transmission and distribution lines. Climb poles and operate aerial lift devices to inspect and repair power lines. Perform hot line work, including rubber glove and hot stick techniques. Read and interpret blueprints, drawings, and work orders. Troubleshoot issues and perform preventative maintenance on electrical systems. Ensure all work complies with OSHA, ANSI, and company safety standards. Operate equipment such as bucket trucks, digger derricks, and line trucks. Participate in job site safety meetings and adhere to all safety protocols. Requirements: Journeyman Lineman Certification (completion of a recognized apprenticeship program). Ability to travel extensively and work in varying weather conditions. Proficiency in climbing poles and working at heights. Experience in energized and de-energized line work. Strong knowledge of electrical systems, safety regulations, and operating heavy equipment. Valid Class A CDL driver's license or ability to obtain one. Ability to work independently and collaboratively in a team environment. Preferred Qualifications: Experience working on transmission and distribution projects. Knowledge of underground utility construction practices. Why Join Us? Competitive compensation and benefits package. Opportunities to work on major projects across diverse locations. Career growth with a focus on professional development and training. If you are a dedicated and experienced Journeyman Lineman looking for a dynamic and rewarding career, we want to hear from you! Apply now to join a team where your skills and expertise will make a significant impact. How to Apply: Submit your resume through FindTalent's application portal or contact our recruitment team for more information. FindTalent is an equal opportunity employer and values diversity in the workplace. All qualified candidates will be considered without regard to race, color, religion, sex, national origin, disability, or veteran status.

For over 40 years, FSG has helped businesses of all sizes with lighting, electrical, signage and technology. But it is not what we do that makes a difference; it is why we do it. Pay range USD $35-41 per hour. Plus, we offer yearly bonuses! FSG offers medical, dental, vision and life insurance and 401K with company match. Hours are Monday - Friday 7:00 a.m. - 4:00 p.m. with possible overtime as required. WE OFFER PTO Medical (free for the employee), Vision, Dental and Life benefits Company Provided Vehicle Company Gas Card 401K with Matching Contribution Monthly Phone Allowance Job Description As a Journeyman Electrician, you will plan layouts and install and repair wiring, electrical fixtures, apparatus, and control equipment. The ideal candidate will mentor and develop Apprentice Electricians as well as promote the core values of FSG through excellent customer service and assuring the safety of all work. Duties and Responsibilities Prepares sketches showing the location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications, safety codes and local electrical codes. Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes. Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels; installs Buss, Busbar, electrical feeders, power systems and/or switchgear. Repairs faulty equipment or systems. Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures. Advise management on whether continued operation of equipment could be hazardous. Meets attendance standards and complies with late/absence notification procedures. Maintain current electrician's license or identification card to meet governmental regulations. Qualifications High School Diploma or GED Current Colorado Electrician's License. Three to five years of experience in the field Valid driver's license Ability to multitask while staying organized Strong verbal and written communication skills Positive customer service skills Experience in lighting is a plus!

Job DescriptionSalary: $21- $22 Cleanroom Apprentice Department: Production Employment Type: Full-Time Compensation: $21 - $22 VPI Compounding, a leader in pharmaceutical innovation, is looking for an enthusiastic individual to join our team as a Cleanroom Apprentice. This entry-level position offers a rate opportunity to begin a rewarding career in pharmacy, with full training provided. The Cleanroom Apprentice will support cleanroom operations while gaining the skills to grow into a Compounding Technician role. Key Responsibilities: Glassware Processing: Clean and sterilize laboratory glassware to support top-tier production. Equipment Preparation: Wash and prep essential lab equipment. Team Support: Assist Cleanroom personnel with daily operations. Materials Transport: Move supplies and materials between work areas to keep operations efficient. Cleanroom Maintenance: Ensure the cleanroom remains pristine, organized, and fully stocked. Safety Compliance: Learn and follow all safety protocols to maintain a safe and efficient environment. Required Qualifications: High school diploma or equivalent. Strong attention to detail and organization. Positive attitude and excellent teamwork skills. Willingness to learn and grow. Ability to stand and be on your feet for 8+ hours. Must be prepared to apply for a Provisional Technician License upon hire. Preferred Qualifications: Previous experience in a laboratory, pharmacy, or cleanroom setting (not required). Demonstrated reliability and consistency in fast-paced environments. Who Should Apply? If you're eager to start a career in pharmacy, enjoy hands-on work, and want to contribute to creating custom medications that improve patient care, this is the role for you. No prior experience is necessary - just a willingness to learn and grow with us. Benefits: Company-paid health, dental, and vision insurance. Competitive pay and performance-based incentives 401(k) plan with employer match Paid holidays, floating holidays, and Paid Time Off (PTO) Tuition and Certification reimbursement programs to support continued learning and professional growth RTD EcoPass for convenient commuting Career growth opportunities, including the potential to advance into a Compounding Technician role. Equal Opportunity Employer VPI is an EEO. It is the policy of VPI to ensure and provide equal opportunity for all qualified persons employed by or seeking employment with VPI without regard to race, color, creed, religion, sex, sexual preferences, national origin or ancestry, age, marital status, veteran status, or non-job-related handicaps. This policy extends to all areas of employment, including, recruitment, job assignment, promotion, training, compensation, benefits, and other terms and conditions.

Design Mechanical, Inc. a Comfort Systems USA company In Colorado, we have two locations - Louisville, our corporate headquarters, and Breckenridge with a combined 400 employees. Locally, we are a small family environment, and nationally, as part of Comfort Systems USA, we are one the largest Mechanical Contractors with excellent benefits packages, competitive pay structures, career progression, and more. Job Title: Sheetmetal Apprentice Department: Sheetmetal Reports to: Labor Manager FLSA Status: Non-exempt (Eligible for OT) Location: Denver, CO Wage Range: $20-28/hourly Benefits Included: Comprehensive Medical, Dental, Vision, FSA/HSA, Matching 401K, Long Term Disability, Short Term Disability, Company Paid Life & Voluntary Spouse & Child Insurance, AD&D, Employee Assistance Program, PTO, Paid Holidays, voluntary additional insurances/benefits, and other great perks. : Perform entry-level general pipefitting duties as required with supervision. Progress through the trade Responsibilities: APPRENTICE 1 (0-12 months) $20-22/hr Basic math skills Trained to understand and operates all machinery Understands terminology, preps ductwork for installation, has basic hand tools as per tool list, and can properly use them Attends all Design Mechanical's Apprenticeship training classes regularly and outside schooling, if available Develops good housekeeping and safety habits Responsible for accurate material checkout from warehouse and labor accounting Attentive to following instructions and has a positive attitude toward leadman, fellow employees, and customers Can document approximately 2,000 hours of employment Perform laborer tasks including such duties as sweeping, cleaning, delivering, loading, unloading, hole cutting, etc. Other duties as assigned APPRENTICE 2 (12-24 months) $23-24/hr All Apprentice 1 responsibilities and be able to: Read non-complex blueprints, detail shop orders from prints, and onsite measurements Install HVAC systems with minor supervision Set up and operate all job-related tools safely Fabricate duct and simple fittings Understand the fundamentals of heating, ventilating, and air conditioning Flat solder copper and galvanized joints, properly water seal duct joints, and OSM joints Be willing to help solve installation problems Document approximately 4,000 hours of employment Other duties as assigned APPRENTICE 3 (24-36 months) $25-26/hr All Apprentice 1 and 2 responsibilities and: Do all types of small jobs alone with supervision including add-on air conditioning, furnace change-outs, humidifiers, air cleaners Can install all types of normal residential, commercial, and industrial HVAC systems with supervision. Able to impart trade knowledge to and lead a helper Can coordinate work with customers and other trades Can weld light gauge sheet and lightweight angle iron frames Can complete jobs successfully in terms of labor and material budgets Can document approximately 6,000 hours of employment Other duties as assigned APPRENTICE 4 (36-48 months) $27-28/hr All Apprentice 1, 2, and 3 responsibilities plus: Application for certification at local jurisdictions as required Know fundamental design and can successfully complete all jobs as per Design Mechanical's standards Can document 8,000 hours of employment Support the total quality effort. Identify and respond to the needs of internal and external customers 100% of the time Work within the guidelines of the safety and employee policy Upon graduation, obtain Denver Journeyman Heating and Ventilating Certificate Other duties as assigned Qualifications: Minimum 18 years of age High school graduate/GED Mechanical aptitude Willingness to learn through on-the-job training and technical school courses Reliable transportation to and from work required What we offer you: Career Path Development and certifications needed/required Vendor/Manufacturer Training, as well as Safety and Task Training Design Mechanical, Inc. is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage, and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines. While performing the duties of this job, the employee is regularly required to: Have a full range of mobility in the upper and lower body Be able to reach overhead Be able to work a full range of physical activities in various positions, including, but not limited to, stooping, standing, bending over, kneeling and squatting, climbing, walking for extended periods of time Be able to lift, pull and push materials and equipment to complete assigned job tasks Be able to lift 70 pounds of weight frequently throughout the assigned workday Capable of hearing at a level or correctable to a level where the person can receive detailed information through verbal communication. Vision must also be at a level or correctable level where the person has clarity both in short and long-distance vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to outdoor weather conditions. The noise level in the work environment is usually loud. One will be exposed to dirt, noise, temperature extremes, vibrations, dampness, equipment movement, hazards, chemicals and solvents, lightning, ice, snow, and work at night and in the dark. The person will be expected to be free from fear of heights and can work at heights on ladders and scaffolds. Some work may occur in confined spaces. This Job Description is not a complete statement of all duties and responsibilities comprising this position and may change with or without notice. Design Mechanical, Inc. is not open to third-party solicitation or resumes for our posted FTE positions. Resumes received from third-party agencies that are unsolicited will be considered complimentary.