Journeyman lineman jobs in Connecticut - 44 jobs

Omni is looking for an experienced Licensed Low Voltage Electrician/Security Technician. Chosen candidates will be responsible for working with project installations and service troubleshooting. We are looking for a very personable, self-motivated, responsible and tech savvy individual to enhance our team. This position demands a strong work ethic and a positive attitude. Responsibilities will include: Work with project team to complete installations of commercial access control, Ip video Projects, cabling, wireless, and alarm installations Completing Daily paperwork for all work performed To be successful; the candidate must be a self-starter and have the following traits and business characteristics: Ability to work independently and as a team player Willing to participate in an emergency on-call rotation Strong Verbal and written communication ability Desire to maintain and improve quality results by following standards and recommending improved policies and procedures. Education, Experience, and Licensing Requirements: MUST hold a valid CT Low-Voltage electrician license MUST hold valid driver's license 1 to 3 years of full-time experience as an installer or service technician Experience in the commercial and residential service and installation of: Fire, Security, CCTV, and access control systems Omni Data is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status.

Job Info Laborer/Apprentice (C&M) Vacancies: 1 Department: Construction & Maintenance Hourly Rate: $32.75 - $ 35.16 Responsibilities Breaks pavement, digs, backfills, tamps trenches or other excavations with hand or pneumatic tools. Loads, unloads, moves, and places in field and in storeroom, using manually operated lift truck and other light material handling equipment as required: pipe, fittings, tools, materials, supplies and equipment, refuse, excavated material. Assists in shoring, bracing and bridging excavations. Removes water from trenches, excavations, manholes and 'her work areas by hand pumps and bailing. Drills holes in concrete, masonry, brick, asphalt, with pneumatic or hand cools; patching same. Mixes and places pavement bases and surface materials. Cleans and scrapes surfaces and applies protective coatings, such as: paint, tar, tape, priming material to Mains & Services Department supplies, material, and equipment. Cleans manholes, vaults, pits, drains, trenches, roofs, eaves, Shovels snow, cleans walks, curs and trims lawns and grass. Obtains from storeroom: pipe fitting material, supplies and tools, as directed Skills and Abilities Appropriate strength and physical condition to carry out lifting and other physical characteristics Good degree of mechanical aptitude. Willingness to cooperate with, assist and train other employees. Knowledge of and compliance with the safety rules and practices of the Company, Satisfactory completion of Company training program. Competencies Be a role model Be agile Collaborate and Share Develop Self & Others Empower to grow Focus to achieve results Technical Skills Company: THE SOUTHERN CONNECTICUT GAS COMPANY Mobility Information Please note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that country. At Avangrid we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law. If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at ********************. Avangrid employees may be assigned a system emergency role and in the event of a system emergency, may be required to work outside of their regular schedule/job duties. This is applicable to employees that will work in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate functions. This does not include those that will work for Avangrid Power. Avangrid employees may also be assigned a NERC Reliability Standards compliance role supporting Critical Infrastructure Protection (CIP) and/or Operations and Planning (O&P) responsibilities. This is applicable to employees that will work in electric transmission, operations, and cyber security business areas in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate business areas. NERC Reliability Standards compliance roles and responsibilities may include additional access protections, training, audit engagement, and required evidence retention, and will be communicated by the employee's management. Job Posting End Date: February-6-2026

Aquarion Water Company is the public water supply company for more than 750,000 people in 72 cities and towns throughout Connecticut, as well as serving customers in Massachusetts and New Hampshire. It is the largest investor-owned water utility in New England and among the seven largest in the U.S. Based in Bridgeport, CT, it has been in the public water supply business since 1857. Across its operations, Aquarion strives to act as a responsible steward of the environment and to assist the communities it serves in promoting sustainable practices. Aquarion Water Company is a wholly-owned subsidiary of Eversource. Job Summary A position is available in the Operations Systems & Efficiency group for an Industrial Controls Electrician. The successful candidate will be routinely engaged in the installation, problem solving and upgrading of equipment at various facilities that supply, treat, pump, store and distribute water through the company's service area. A complete understanding of electrical theory, electronics, industrial control systems and instruments shall be maintained with yearly training in both electrical licensing and instrumentation certification. The position may require overtime to respond to electrical/control system emergencies during evenings, weekends, and holidays as well as mandatory participation in a routine standby. Principal Responsibilities Electrical Capabilities: * Assembles and installs all types of new or repaired electrical circuits, systems, instrumentation and equipment, including but not limited to motors, regulators, controllers, generators, switches. * Inspects electrical equipment and machinery, diagnoses faulty operation, determines proper corrective action, document in SAP maintenance scheduling program, and makes indicated repairs. Makes meggar, voltmeter, ammeter, ground locating and other electrical tests. Possesses working knowledge of electrical distribution systems and switchgear. Must know underwriter codes, national codes, state and local codes, company rules and regulations and comply with them. * Engages in company preventative maintenance activities including but not limited to VFD Maintenance, IR Thermography, MCC/Switchgear Maintenance, and assisting contractors/other AWC Supply Operations groups as required. * Keeps familiar with latest types of electrical control, motor AC/DC Drive, (VFD) Variable Frequency Drives. * Configure, Commission, Troubleshoot & Startup any AC/DC Drive, any (HMI) Human Machine Interface current, (PLC) Programmable Logic Controller, (DCS) Distributive Control System, and PLC/RIO panel for current and future installations in conjunction with the Control System Services Group (SCADA). * Document all electrical changes by red-line plant drawings and notify the Control System Services Group with a copy of said changes. Ensure that all wires and devices in / outside panels are labeled. Assist maintenance personnel with proper electrical symbols & check drawings marked up for accuracy. Ensure electrical panels have up to date drawings and are accurate. * Excellent diagnostic skills are required as situations can be complex and non-recurring. Must be able to identify recurring and non-recurring operating conditions and maintenance needs requiring adjustment. Mechanical Capabilities: * Inspects machinery and equipment while in operation, diagnosing faulty operation, if any, lubricating it, and making such adjustments or repairs as are necessary to keep the equipment in operation. * Maintains, inspects, lubricates, and repairs as necessary the following plant systems: Water system, including softener, pumps, towers, and filtering equipment; compressed air system, including compressors, valves, filters, separators, and controls; HVAC systems, including units, filters, washers, vaporizers, and fans; gas and propane systems, plant drainage and sewage disposal system. installation maintenance including landscaping. * Uses hand and power tools of all kinds and variety of measuring and testing instruments. * Assists other AWC departments with station upgrades and construction as necessary. Preferred Requirements * Strong customer service, project management, electrical and mechanical skills. * Problem Solving: (Situations are identical; similar; differing; variable; non-recurring). * Excellent diagnostic skills are required as situations can be complex and non-recurring. * Can identify recurring and non-recurring operating conditions and maintenance needs requiring adjustment. * Accountability: (Assist others, share responsibility, fully responsible, direct others. Also, if applicable, state dollar volume of assets controlled, and number of people supervised, directly and indirectly). * Once fully trained, successful candidate will participate in a standby rotation. Education/Certifications * High School Diploma, GED or equivalent combination of education and experience. * Valid Connecticut driver's license with a clean driving record is required. * A current Connecticut Electrician's License (E2), required. * A current Connecticut Electrician's License (E1), preferred. * A minimum of two (2) years' experience as a licensed electrician required. Salary * This position is classified as a Non-Union Hourly position with a rate range that has a training wage of $42.88/hour. * Successful candidate will move through Step 1 through 8 of the range with satisfactory performance to the maximum salary. * This position is Monday through Friday, 7:00AM to 3:30PM. * This position will be reporting out of our Shelton (CT) office. Aquarion Water Company is an equal opportunity employer, and we prohibit discrimination based on age, color, disability, marital or parental status, national origin, race, religion, sex, sexual orientation, gender identity, military or veteran status, or any other legally protected status in accordance with applicable federal, state and local laws.

Job Description What We Do We are a team of home service experts who go the extra mile to ensure peak performance for your home's plumbing, heating and air conditioning and electrical systems.Do you have strong organizational, customer service, and problem-solving skills? Do you like working in a fast-paced environment and meeting the changing needs of the home service business and its customers?Then we want to talk to you.The HVAC Apprentice/Driver will learn from and work in the Norwalk, CT area with other HVAC service techs and installers. The Apprentice will interaction with the customers and will be a valued player in support of the company's growth.We keep on growing because we only hire the best, and our customers love us for it. We've been at this a long time here in Norwalk, CT. You've probably seen our trucks and our ads. What you don't know is what it's like to be a part of a team like this. How much you feel appreciated when you don't cut corners. How much we inspire ongoing training and education. How it feels to have customers rave about you and demand that you're the only technician that works in their home. How much you can earn when you truly are the best. People often come to us looking for a job. They stay with us because they find a fulfilling career, room to grow, and opportunities to excel.Learn more about us If you want to be part of something bigger than just a job - make this career move and find exactly what you're looking for. You will work in a place where you will be appreciated by your team and customers, and where your work has a direct effect on the success of the company.In return for this great opportunity we are looking for:Must have a clean driver license.Mechanical skills, proficient working with tools.Enjoy helping people. Be polite and respectful in our customers homes and with how you communicate with your colleagues.Be resourceful. Focus on solutions, not on problems.Attention to details. Looking for employees who take pride in the quality of their work.Great attitude. Looking for employees who whistle and smile while they work. Negative attitudes need not apply.Looking for apprentices who want to quickly learn and grow. Our top technicians earn over $100,000 annually. This could be you in under 3 years.Job Type: Full-time Pay: $15.00 - $20.00 per hour Schedule: 8 hour shift Monday to FridayOn call OvertimeWeekends as needed Education:High school or equivalent (Preferred) Experience:HVAC: 1 year (Preferred) License/Certification:EPA Type II (Preferred) EPA Universal Certification (Preferred) Ability to Relocate:Norwalk, CT: Relocate before starting work (Required) Work Location: On the road We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

These are long term permanent positions with a highly respected and growing Employee-owned Design Build Construction Firm! SUMMARY: The Electrician will participate in the installation or maintenance and inspection of electrical systems and associated processes. RESPONSIBILITIES: Regular attendance at assigned location; may include A/Z office or other project site; Prepares sketches showing location of wiring and equipment, or follows blueprints, insuring that concealed wiring is installed before completion of future walls, ceilings and flooring; Measures, cuts, bends, threads, assembles and installs electrical conduit, using such tools as hacksaw, pipe threader and conduit bender; Oversees or participates in wire installation with conduit and cable trays; Installs control and distribution apparatus, such as switches, relays and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools; Connects power cables to equipment, such as motor, and installs grounding leads; Test continuity of circuit to insure electrical compatibility and safety of components, using testing instruments, such as ohmmeter, battery and buzzer, and oscilloscope; Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation or replacement; Perform other routine duties as directed by workplace leader, electrical panels, and standby generation; Avoid unsightly, hazardous and unreliable wiring, consistent with specifications and local electrical codes, redlining drawings, complete documentation with as found and as left conditions; Must maintain strict adherence to safety rules and quality; Participate in site housekeeping; Interact with co-workers in an attentive courteous manner; Additional duties as directed by management. SKILLS & EXPERIENCE/REQUIREMENTS: * Ability to work independently or as part of a team; * 3 years of Field Experience, trade school or apprenticeship; * Appropriate State journeyman license; * OSHA 10 certification. A/Z Corporation is an AA/EOE Employer

Job DescriptionMeriden electrical contractor seeking Licensed Journeyman for fulltime employment. Pay based on experience. Benefits include vacation,, holiday, medical, dental and vision, & life insurance, retirement plan/match. Additional life insurance & Aflac available.

Requirements Bachelor's degree from an accredited college or university Successful experience working with children Strong verbal and written communication skills Demonstrated interest in teaching Understanding of technology and its applications in schools Preferred, but not required: --Interest in coaching or assisting with After School activities --College or university GPA of 3.0 or above preferred --Experience with Responsive Classroom approach Responsibilities Work collaboratively with Lead Teacher in all aspects of classroom life including: Supporting and modeling positive discipline Preparing and planning curriculum materials Evaluating student work and communication with families Gradually increasing responsibility for teaching students in small and whole groups in all subject areas Divisional supervisory responsibilities including: -- Early Childhood & Lower School: recess supervision, lunch table management, escorting of students to other classrooms, bus coordination -- Middle School: recess supervision, lunch table management, bus coordination, assistant or lead coaching Attend faculty meetings and Professional Development seminars Be available Monday-Friday 7:45-4:15 on school days and for some evening events throughout the year. Desired Qualities Self-reflectiveness Collaboration with colleagues Communication to multiple audiences Comfort with and adaptability in fast-paced environments Strong organizational skills and attention to detail Inexhaustible energy A sense of humor A commitment to equity, inclusion, and fostering of a culture of belonging for our community Willingness to be challenged

Adamah Apprentices support farm production at the Adamah Fellowship in Falls Village, CT. The fellowship is a three-month residential farming program for young adults building Jewish community on the land. Apprentices are paid staff with experience in agriculture who work with the Adamah Farm Director to lead fellows in farm production. The apprenticeship runs from April-November at the Isabella Freedman Jewish Retreat Center in Falls Village, CT. Compensation includes full-time minimum hourly wage plus free onsite housing and utilities, food from the farm and access to educational opportunities. Apprenticeship Responsibilities: leading Adamah fellows in daily farm tasks including but not limited to planting, harvesting, bed-prep, weeding, mulching, wash-and-pack, and delivery; holding the details and complexity of accomplishing projects from start to finish while maintaining the farm as a resonant learning space for fellows; participating in some of the Adamah programming when the fellowship is in session including our morning prayer service and Adamah sharing circles; supporting hospitality departments at the Isabella Freedman Jewish Retreat Center when needed; supporting our homestead scale livestock, markets, onsite educational programming, and other Adamah farm endeavors when needed; engaging in the community with commitment, responsibility and leadership. Ideal Qualifications: Farming experience Experiential education background Excellent problem solving and project management skills Teaching and leadership skills Ability to hold complex details Punctuality and reliability Adaptability and flexibility as plans shift depending on farm conditions and community needs Ability to connect with a wide range of personalities Desire and skills to be in community Excellent communication skills and the ability to articulate needs while keeping the needs of others in mind. Farms are composites of many moving parts and they involve a lot of communication. As a residential community working in informal education, our farm requires even more communication than most. A positive attitude, a love of manual labor, a passion for regenerative farming and food systems, a sense of humor, and the capacity to feel moved by the sight of rotting food waste mixed with manure and straw. Educational Opportunities:Experiential education is at the core of what we do at Adamah. Apprentices can expect impromptu discussions about soil management while weeding, about lactobacilli while pounding sauerkraut, or about rotational grazing and parasite load while mucking the barn. Apprentices will have access to Adamah programming which includes several classes a week, avodat lev, community gatherings, and some retreats at the Isabella Freedman Jewish Retreat Center. Apprentices will be allowed time off from farm work as desired to attend field walks with the Mid-Hudson Valley Collaborative Regional Alliance for Farmer Training or other technical assistance providers throughout the season. Apprentices will meet with the Farm Director throughout the season to discuss their learning goals. How to ApplyTo apply, send a resume and cover letter to ***********************. If you are interested in joining the Adamah community, but don't have much farm experience, consider our Adamah fellowship program. You can learn more about both on our website ************************** Frequently cited statistics show that women and underrepresented groups apply to jobs only if they meet 100% of the criteria. Adamah encourages you to break that statistic and apply. Adamah is strongly committed to equal employment opportunities for all individuals. We especially encourage people of color, women and nonbinary folks, LGBTQ+ people, disabled people, working class and low-income people, and those with other marginalized identities to apply. The Adamah Farming Fellowship is a program of the national Jewish environmental organization, Adamah. The mission of the national organization is to create vibrant Jewish life in deep connection with the earth, catalyzing culture change and systemic change through immersive retreats, Jewish environmental education, leadership development, and climate action. The mission of the farm and fellowship is to cultivate the soil and the soul to produce food through regenerative farming and to build Jewish intentional community on the land.

DoD SkillBridge Internship: Electrical Installer (472323) SkillBridge Host Company: SIEMENS SkillBridge Provider: Vets2PM LLC Location: Milford, OH Applicants must be active\-duty U.S. Military Members who qualify for the DoD SkillBridge Program. To Apply: Go to ************************************************* and complete the SkillBridge interest form. Return to this posting and click ‘Apply'. Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you? Transform the everyday with us! Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives. This opportunity is unique to active\-duty US Military Service members with formal approval to participate as a SkillBridge Intern in collaboration with Vets2PM's authorized DOD SkillBridge program. You will gain hands\-on experience during your internship and will have the opportunity to join (upon successful completion of the internship) one of the world's leading technology companies. Our Three Main Business Groups that you could be assigned to: Building Automation: HVAC Controls, Lighting Controls, & Mechanical\/Electrical Services Fire\/Life Safety: Fire Alarm, Mass\/Emergency Communication, and Sprinkler\/Suppression Security: Integrated Surveillance and Access Controls Electrical Installer Electrical Installers assist with equipment installation, trial runs, investigative tests, repairs, and overhauls of building automation systems, fire alarm, or security systems. Activities include installation and check\-out of electric and electronic components, conduit, wire, and cable while keeping records and documentation. This position will also provide on\-site product and service training to the customer. Why is this so important? Our Electrical Installers ensure safe, efficient, and reliable electrical systems that underpin Siemens's operations, safety, and success. Responsibilities and learning opportunities include but are not limited to: Install conduit, wire, cable, and devices including panels, sensors, and components for a range of systems, ensuring their proper integration Perform preventive maintenance and routine inspections Perform wiring check\-out and assist with system start\-up Disconnect and dismantle electric\/electronic instruments, panels, sensor, etc. Troubleshoot wiring issues Coordinate with operations for the timely delivery of materials and supplies to the job site Adhere to local, corporate, and OSHA safety policies and procedures Desired Military Experience, Backgrounds and\/or Aptitude: Civil Engineering (HVAC & Electrician)\/ Gas Turbine Electricians Mechanical\/Electrical\/Electronic Systems Automation\/Integration Technicians Nuclear Engineering\/Power\/Energy & Nuclear Plant Operator Satellite\/Radar Systems Comm Techs Fire Control Navaids Submarine Electronics\/Computer Techs Avionics Systems & more! You'll make an immediate impact by having the following qualifications: Basic Qualifications: Only active military personnel will be considered for this internship and program acceptance requires military approval Selected candidates will continue to be paid under their current wage\/benefits provided by the US Military and will not be paid by Siemens directly throughout internship participation High school diploma or state\-recognized GED required Demonstrated experience and\/or applied knowledge\/aptitude in the following: Electro\-mechanical aptitude and understanding of electrical codes, requirements, and efficient installation methods and practices Technical experience installing conduit and running pipe Technical experience supporting mechanical, electrical, thermodynamic, hydraulic, mechatronic, or other related systems Ability to read and understand design and construction documents Experience using Microsoft Office applications Demonstrated ability to communicate effectively (verbal & written) Demonstrated ability to interface with customers and collaborate with team members Ability to work on\-site and travel locally as needed Legally authorized to work in the United States on a continual and permanent basis without company sponsorship Must be 18 years of age and possess a valid driver's license with limited violations Preferred Qualifications: U.S. Military experience as an E5 or above preferred (Navy, Air Force, Army, Marines, Coast Guard, Space Force, National Guard, Reserves) Experience installing low\-voltage control systems Associate or Bachelor's degree preferred Familiarity or experience with engineering HVAC, Building Automation, Fire Alarm, or Security systems preferred Ready to create your own journey? Join us today. About Siemens: We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource\-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers. Our Commitment to Equity and Inclusion in our Diverse Global Workforce We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us. [NOTE: Because this is a SkillBridge Internship, it is understood that no single candidate will have equal expertise in all the areas of responsibility listed. Successful candidates will possess a compelling combination of many of them and the self\-awareness and wisdom to leverage existing and\/or new resources in the area(s) where they lack personal mastery.] Vets2PM Provides: Mentorship and guidance via weekly SkillBridge Intern Zoom Meetings. PM Fundamentals course, Resume writing, LinkedIn optimization, and interview skills course. Other free resources, including an electronic copy of 'How to Speak Civilian Fluently'. Other: Not all internships include certification training by Vets2PM, as many host companies include their own internship\-focused training instead. If selected for an internship with Vets2PM please read your approval email, letter, and training plan to be sure you understand what is included in your internship. "}}],"is Mobile":false,"iframe":"true","job Type":"SkillBridge Internship","apply Name":"Apply Now","zsoid":"645288301","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"ZR_3082_JOB"},{"field Label":"Business Clients Name","uitype":4,"value":"Siemens"},{"field Label":"Job Opening Status","uitype":2,"value":"In\-progress"},{"field Label":"Industry","uitype":2,"value":"Building Automation"},{"field Label":"City","uitype":1,"value":"Milford"},{"field Label":"State\/Province","uitype":1,"value":"Ohio"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"00000"}],"header Name":"DoD SkillBridge: Electrical Installer (472323)","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00148003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"**********33941294","FontSize":"12","location":"Milford","embedsource":"CareerSite","logo Id":"2cboc00f268497cfb4f288b5ec8f2e1ba1986"} Curious to see how Siemens recognizes the Military Community? CLICK HERE: Military Video

Convergint is looking for a full-time, enthusiastic, results driven and forward-thinking Electrical Installer to join our amazing culture. In this role, you will install, program, test, repairs, and service a variety of systems and equipment which may include security, fire alarm & life safety with minimal guidance as needed. You will work closely with customers and internal colleagues in providing technical installation support and training. As an Electrical Installer, you are a part of a dynamic team that allows you to grow as Convergint grows. For information about how we use your personal information, please see our Colleague & Applicant Privacy Notice, available on convergint.com/careers. Who You Are You have a passion for providing world-class service to customers, colleagues and communities. You are a person of integrity with a commitment to growth, accountability and delivering results. You want to join an organization with a positive culture that embraces equal opportunity and allows everyone to be the best version of themselves at work and home. You want to grow with us and deliver results as an exceptional Electrical Installer. Who We Are With 20-years of proven growth and exceptional performance, our mission is to be our customer's best service provider. We realize the importance of diversity in achieving that goal. Our company was built upon a solid foundation of 10 Values and Beliefs which drive our unmatched culture, making us the #1 global, serviced-based systems integrator in the industry. We take great pride in protecting the lives and assets of our customers and their communities with the solutions we provide. What you'll do with “Our Training and Your Experience” Convergint's greatest strength is our people! Every colleague is encouraged to participate in our Recruit Awesome People program, helping us grow Convergint by promoting our colleague-first culture and referring top talent to the Talent Acquisition Team and hiring managers. Install, program, test, repairs, and service a variety of systems and equipment which may include security, fire alarm & life safety, and/or building automation with minimal guidance as needed. Work closely with customers and internal colleagues in providing technical installation support and training. May assist or train less experienced Electrical Installers. Refers more complex issues to more experienced colleagues. Interpret manuals, schematics, and wiring diagrams, and repairs equipment, utilizing knowledge of electronics and using standard test instruments and hand tools. Provide basic installation assistance as directed by project lead. Act as “our customer's best service provider” at all times thereby ensuring Convergint Technologies is the customer's first choice for service. Take ownership of onsite project including safety, quality and performance. Observe and practice Convergint Quality Standards. Make suggestions for installation methods to improve profitability and quality. Learn and perform tasks of an Electrical Installer III in order to progress through the trade program. Provide feedback to the Job-Lead regarding problems and anticipate time associated with an assigned task. Act as primary liaison to Project Lead. What You'll Need Experience installing and wiring access control, network cameras, door hardware, panel installation & wiring, and programming of door and camera additions. Solid Construction Skills and understanding of system plans. Solid understanding of blueprints, design drawings including wiring and labeling methods, system wiring, wiring methods, cut sheets, wiring schematics, and cable support installation (J-Hook, Raceway, Conduit, Cable Support). Very familiar with basic blueprints, schematics, manuals, and other specifications to determine installation procedures unassisted, may require assistance with more complex specifications. Strong customer focus and ability to work under pressure; ability to maintain awareness of, and seek to meet the needs and wants of the customer without being prompted. Solid mechanical and electrical aptitude (e.g. works with a variety of hand and power tools such as drill, screwdriver, wire stripper, hacksaw, crimper) and ability to read blueprints and drawings; solid math skills (for some positions, this may include calculating area, velocity, resistance, voltage, etc.). Solid verbal, written and interpersonal communication skills. The Electrical Installer will be responsible for providing basic hand tools as required to perform the daily tasks of the position. A valid driver's license with a clean driving record. Company Benefits Convergint fosters a supportive, accessible, and inclusive environment in which all individuals are able to realize their maximum potential within the company. We offer a variety of programs and exceptional benefits: 10 Company Holidays and Paid Time Off starting at 13 days annually Fun & Laughter Day Off Medical, Dental & Vision Plan Life insurance & Disability Plan Wellness Program 401K Matching Plan Colleague Assistance Program Tuition reimbursement Competitive salary and compensation plan Vehicle reimbursement plan or company vehicle Corporate Social Responsibility Day Cell phone reimbursement (if applicable) Paid parental leave Requirements: Education: High School/GED or equivalent experience Minimum Experience: 3-5 years in electronic security industry Previous construction experience including some level of electrical or a low voltage background CT Journeyman / Low Voltage License Preferred Experience (but not required): Relevant trade designation (e.g. Electrician) Experience in 1 or more of the following industries: electronic, fire alarm & life safety, and/or building automation Experience with Axis / Bosch / DMP / Lenel / Software House Certifications & Licenses: Project Management Institute (PMI); industry-specific certifications and/or Convergint is an Equal Opportunity Employer. Visit our Convergint careers site to learn more about the company and the exciting opportunities available. Please note that this job posting includes salary information for the assigned target market range within the primary geographic region the requisition is posted. If the position is posted in multiple locations or is a remote position, the salary range may vary. Individual pay rates will, of course, vary depending on the job, department, and location, as well as the individual skills, experience, certifications, specific licenses, and education of the applicant.

The Final Inspection Apprentice position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers. Responsibilities: Review all raw material and processing certifications IAW Customer and PO requirements. Utilize Material Release database to document quality review/activities. Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required. Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements. Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns. Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements. Perform tasks as assigned by Supervisor and/or Team Leader. Physical Requirements: Ability to lift 50 lbs. Ability to stand or sit for extended period of time. Fine motor skills with frequent hand and arm movement. Frequent twisting and bending. Unusual Environmental Conditions: Loud machining environment; exposure to aerospace metals, lubricants, and chemicals. Required Personal Protective Equipment: Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed. Qualifications - Required US Citizen High School Diploma or equivalent Minimum of 1 Year of Aerospace Inspection Experience Familiar with ISO / AS9100 requirements and/or Auditing Skills Basic math or industrial mathematics desired. Good written and verbal skills Basic computer skills Strong attention to detail and accuracy Strong problem-solving skills required Strong organizational skills required

Vacancy Specification One thing's for sure as a Store Management Apprentice in Retail you'll never be bored. Balancing theory with practical store work, you'll be expected to work hard on this three-year programme. There's a real family feel here and we all pitch in as part of a close-knit team. And since there's always loads of support from those around you, ranging from Store Managers to Store Assistants, you'll never feel like you're struggling. In this fast paced environment you'll get to learn something new every day in a company that thrives on being different. As someone who wants to make things happen, you'll find all this adds up to an exciting challenge. The time will fly by and before you know it you will have your Level 3 Retail Team Leader qualification and be working as a fully-fledged Deputy Store Manager with real opportunities for progression in the future. Please note you will need GCSEs in Maths and English, grade 4 and above (minimum grade C or equivalent) to be able to undertake the Apprenticeship.

Encon is seeking an Apprentice to join our Encon University Program - Sheet-metal department. Job Responsibilities • Collaborate with technicians, project managers, clients/contractors, and installers to meet project goals. • Learn to understand the layout of ductwork systems and equipment; read blueprints. • Attend team meetings as needed. • Support sheet-metal technicians as needed. Required Skills & Experience · High School Diploma & Trade School Diploma · Ability to operate a computer and assigned software (including email) · Ability to read and interpret blueprints, diagrams, schematics, and written reference material · Strong problem solving skills · Excellent written and verbal communication skills · Professional demeanor · Commitment to customer service · High moral standards and strong work ethic · Superior organizational and time management skills · Critical thinking skills and good decision-making ability. Desired Skills & Experience · OSHA 10 Eligibility Requirements · This position requires a valid driver's license and reliable transportation. · Employment/education will be verified. · Applicants must be currently authorized to work in the United States on a full-time basis. · Encon is a drug free workplace and requires post-offer pre-employment drug testing. Physical Requirements • Able to work in a variety of extreme weather, hot and cold conditions. • Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces. • Able to work safely at elevated heights such as rooftops, ceilings, and ladders. • Able to bend, crawl, stoop, stretch, and reach. • Able to walk on uneven surfaces. • Able to work off a ladder, sometimes at heights. • Able to safely lift 50 pounds. Requirements CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE

Work will be in Hartford County and surrounding areas. The Traffic Control Apprentice is responsible for maintaining the flow of traffic around construction zones, maintenance projects, accidents, or other temporary traffic disruption areas. This role ensures the safety of workers, motorists, and pedestrians by maintaining proper traffic control and following all safety guidelines and regulations. As a Traffic Control Apprentice, you will be our front line for safety. KEY RESPONSIBILITIES: Control vehicle and pedestrian traffic around work zones using handheld signs, paddles, or flags Set up, maintain, and remove temporary traffic control work zones including signs, barricades, and cones according to project requirements and regulations Communicate clearly with drivers to provide guidance and ensure safe traffic flow Monitor traffic and construction activity to anticipate and respond to potential safety hazards Coordinate with supervisors and other team members using hand signals, radios, or other communication equipment Adhere to all safety protocols, including wearing appropriate personal protective equipment (PPE) Warn workers when approaching vehicles fail to heed signals to prevent accidents and injuries Assist with loading/unloading traffic control equipment as needed Perform other work-related duties as assigned REQUIREMENTS/ QUALIFICATIONS: Being a Team Player. Understand and apply safe traffic control practices, sometimes in stressful situations. Ability to receive and communicate instructions clearly, firmly and courteously. Strong attention to detail and focus. Keep a reliable and professional demeanor at all times. Able to stand for extended periods (8+ hours) while maintaining focus. Be 18 years of age or older. Must be willing to submit a drug screen. Must have a valid driver's license AND also reliable transportation. Able to lift and carry up to 50 lbs. Ability to work in all weather conditions. Have a high school diploma or equivalent preferred. Traffic control/ Flagger Certification (Provided by the company). EXPERIENCE: No prior experience required; traffic control experience preferred. Willing to learn and follow safety procedures. WORK ENVIRONMENT: Outdoor work environment in and around construction zones Exposure to traffic, loud noises, and construction equipment Travel to different work sites Safety is more than a priority-it's the foundation of our mission at American Flagging. Our certified professionals adhere to the highest safety standards, protecting both our workers and the communities we serve. By minimizing risks and disruptions, we create secure environments for all road users and worksite personnel. With safety at the heart of every project, we ensure peace of mind and consistent quality for our clients.

Marmon Utility LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Performs repairs and service calls on production equipment, Preventive Maintenance on facility & Production Equipment electrical systems. Shift Details: Training Shift: Mon-Fri 7am-3pm Working Shift: Mon-Fri 11pm-7am Essential Job Functions: * Adhere to all company safety standards to ensure personal and team safety. * Maintain equipment and work areas in a clean and orderly fashion. * Demonstrate professionalism, punctuality, and dependability. * Identify, address, and report potential issues to minimize downtime. * Perform effective first-time repairs. * Attend team meetings and contribute to continuous improvement initiatives. * Be available for overtime as needed for urgent repairs and projects. Education, Experience, and Knowledge: * High School Diploma required * Trade School background preferred * Experience with Industrial Electronics & Controls Skills and Requirements: * Strong electrical aptitude * Ability to read voltmeters and other precision tools * Knowledge of Lockout/Tagout (LOTO) procedures * Ability to read and follow written instructions * Strong communication skills * Troubleshooting capabilities * Attention to detail * Ability to read and interpret electrical schematics * Basic computer literacy * Team-oriented mindset Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Prosek Partners: Public Relations Development Program At Prosek Partners, the stories we tell impact the global economy. Prosek's PR Development Program offers post graduate students the opportunity to launch their careers in financial communications. Our 6-month program is designed to train the next generation of PR agency professionals. In this program, you'll get the chance to work in a fast-paced environment alongside some of the biggest household financial services names in the world. You'll develop your media relations and writing skills while learning the intricacies of Wall Street, financial technology, B2B, and professional services. Program Overview and Responsibilities Real Work Experience Prosek Apprentices will: Develop a strong knowledge of the media landscape by building media lists, pitching and establishing relationships with journalists. Become an expert in reading and analyzing news trends and developing timely pitch angles Write content (messaging, press releases and pitches) to propel your clients' brands. Take an owner's role in every element of account execution by keeping track of action items, taking thorough notes during internal and client calls and tracking the team's progress as it relates to media opportunities and progress across projects. Become a master researcher by participating in the business development process. Professional Development and Training Prosek's Boot Camp program is a curriculum curated and taught by top leaders across the firm on a weekly basis throughout the program. Our Boot Camps are designed to educate Apprentices on both PR and our client sectors. Topics of education include: Writing 101 Professional Optics Capital Markets and Asset Management Professional Services and Financial Technology Wealth Management and Banking Internal Network and Support We invest heavily into the growth and support for our Prosek Apprentices, pairing each Apprentice with a manager, a media buddy and a mentor. Managers are responsible for identifying their Apprentice's strengths, areas for development, and interests to ensure they're given the right tools to succeed. Media buddies help Apprentices navigate the financial media landscape and develop their media relations skills. Mentors provide support to Apprentices as they acclimate to a new environment and corporate culture. Throughout the Apprentice Program, we will be assessing the apprentice's performance to determine readiness for promotion to Assistant Account Executive, taking into consideration performance and business needs at the time. Experience and Qualifications Completed BS/BA degree by the start of the program. Strong interest in financial services, professional services, technology, and B2B communications. Possess a team player mindset and willingness to work collaboratively. Have solid research and critical thinking skills along with strong time management and prioritization skills. Extreme attention to detail is a must. Strongly encouraged (but not required) to have prior PR internship(s). Salary: $20.00/hour Our Core Values: Chemistry, Collaboration and Belonging: Our collegial culture inspires people with different perspectives and backgrounds to work towards common goals as we brainstorm, plan and execute on behalf of our clients and to build our business together. Grit and Hustle: We work hard. We roll up our sleeves. We are not precious or pretentious. We do not take short cuts. Instead, we put in the work and do what it takes to get the job done. The Excitement of New Challenges: We view challenges as opportunities and embrace them. They motivate us to learn and grow so that we can be the best versions of ourselves, for our clients and each other. A Workplace with Humanity: We recognize the rigor and demand of our work. We also recognize that life inside and outside of Prosek can be stressful. We work very hard to run our business with a heavy dose of humanity and to make Prosek a safe place where people enjoy the work and each other. Our Beliefs on Culture, Diversity & Belonging: We are committed to building a diverse workforce reflecting and embracing diversity of all kinds - diversity of geography, cognitive diversity, race, ethnicity, age, gender identity, sexual orientation, political affiliation, socioeconomic backgrounds. We believe having teams that represent the broader communities where we live and work creates a culture that celebrates creativity, inclusiveness and teamwork and helps us offer our global clientele of mature and emerging businesses counsel that is dynamic, rich and nuanced. Prosek Partners provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-HYBRID

Salary: DOE + Benefits Omni Data is a network solutions enterprise that specializes in physical access, security, and network infrastructures. Omni is a growing organization located in the New Haven area. Job Description Omni is looking for an experienced Licensed Low Voltage Electrician/Security Technician. Chosen candidates will be responsible for working with project installations and service troubleshooting. We are looking for a very personable, self-motivated, responsible and tech savvy individual to enhance our team. This position demands a strong work ethic and a positive attitude. Responsibilities will include: Work with project team to complete installations of commercial access control, Ip video Projects, cabling, wireless, and alarm installations Completing Daily paperwork for all work performed To be successful; the candidate must be a self-starter and have the following traits and business characteristics: Ability to work independently and as a team player Willing to participate in an emergency on-call rotation Strong Verbal and written communication ability Desire to maintain and improve quality results by following standards and recommending improved policies and procedures. Education, Experience, and Licensing Requirements: MUST hold a valid CT Low-Voltage electrician license MUST hold valid drivers license 1 to 3 years of full-time experience as an installer or service technician Experience in the commercial and residential service and installation of: Fire, Security, CCTV, and access control systems Omni Data is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status.

What We Do We are a team of home service experts who go the extra mile to ensure peak performance for your home's plumbing, heating and air conditioning and electrical systems.Do you have strong organizational, customer service, and problem-solving skills? Do you like working in a fast-paced environment and meeting the changing needs of the home service business and its customers?Then we want to talk to you.The HVAC Apprentice/Driver will learn from and work in the Norwalk, CT area with other HVAC service techs and installers. The Apprentice will interaction with the customers and will be a valued player in support of the company's growth.We keep on growing because we only hire the best, and our customers love us for it. We've been at this a long time here in Norwalk, CT. You've probably seen our trucks and our ads. What you don't know is what it's like to be a part of a team like this. How much you feel appreciated when you don't cut corners. How much we inspire ongoing training and education. How it feels to have customers rave about you and demand that you're the only technician that works in their home. How much you can earn when you truly are the best. People often come to us looking for a job. They stay with us because they find a fulfilling career, room to grow, and opportunities to excel. Why we need you Because we offer state of the art customer experiences, we need a top of the line HVAC technician who genuinely cares about the customer and are not looking for “just a job”, but a career. The big task You will aid in diagnosing and repairing heating and cooling systems and lead customers to informed and confident buying decisions by providing an extraordinary customer experience. Key sub tasks Maintain communication with dispatch, your manager, parts and installation teams. Keep your company truck clean, inside and out. Keep your truck inventory up to date. Properly complete paperwork. Join the on-call rotation. Maintain a clean and professional appearance. Have and maintain a clean driving record. Participate in training allowing you to grow and develop as a professional. Have or be willing to get the proper certifications. We can help you with this. Skills and experience If you can achieve the above and you find it fun and challenging - you have just the right amount of skill and experience. What we offer Our top performers are among the highest paid technicians in Upstate New York. You'll have unlimited earning potential. Company supplied, take it home at night, new and safe, super-cool company truck. Medical Insurance -- we pay 100% for your insurance premiums for life insurance, short-term and long-term disability. New technology, including cellphone stipend, iPad & access to integrated software. State of the art tools, parts and supplies. 401k Plan with a company match. This is last on the list because it's most important. We care about our team and expect you to bring that same caring when you join. We do a lot more than just work together. You'll come to love our company outings, and you'll build life-long friendships at Astacio. Learn more about us If you want to be part of something bigger than just a job - make this career move and find exactly what you're looking for. You will work in a place where you will be appreciated by your team and customers, and where your work has a direct effect on the success of the company.In return for this great opportunity we are looking for:Must have a clean driver license.Mechanical skills, proficient working with tools.Enjoy helping people. Be polite and respectful in our customers homes and with how you communicate with your colleagues.Be resourceful. Focus on solutions, not on problems.Attention to details. Looking for employees who take pride in the quality of their work.Great attitude. Looking for employees who whistle and smile while they work. Negative attitudes need not apply.Looking for apprentices who want to quickly learn and grow. Our top technicians earn over $100,000 annually. This could be you in under 3 years.Job Type: Full-time Pay: $15.00 - $20.00 per hour Schedule: 8 hour shift Monday to FridayOn call OvertimeWeekends as needed Education:High school or equivalent (Preferred) Experience:HVAC: 1 year (Preferred) License/Certification:EPA Type II (Preferred) EPA Universal Certification (Preferred) Ability to Relocate:Norwalk, CT: Relocate before starting work (Required) Work Location: On the road

Convergint is looking for a full-time, enthusiastic, results driven and forward-thinking Electrical Installer 3 to join our amazing culture. In this role, you will install, program, test, repairs, and service a variety of systems and equipment which may include security, fire alarm & life safety with minimal guidance as needed. You will work closely with customers and internal colleagues in providing technical installation support and training. As an Electrical Installer 3, you are a part of a dynamic team that allows you to grow as Convergint grows. For information about how we use your personal information, please see our Colleague & Applicant Privacy Notice, available on convergint.com/careers. Who You Are You have a passion for providing world-class service to customers, colleagues and communities. You are a person of integrity with a commitment to growth, accountability and delivering results. You want to join an organization with a positive culture that embraces equal opportunity and allows everyone to be the best version of themselves at work and home. You want to grow with us and deliver results as an exceptional Electrical Installer. Who We Are With 20-years of proven growth and exceptional performance, our mission is to be our customer's best service provider. We realize the importance of diversity in achieving that goal. Our company was built upon a solid foundation of 10 Values and Beliefs which drive our unmatched culture, making us the #1 global, serviced-based systems integrator in the industry. We take great pride in protecting the lives and assets of our customers and their communities with the solutions we provide. What you'll do with “Our Training and Your Experience” Convergint's greatest strength is our people! Every colleague is encouraged to participate in our Recruit Awesome People program, helping us grow Convergint by promoting our colleague-first culture and referring top talent to the Talent Acquisition Team and hiring managers. Install, program, test, repairs, and service a variety of systems and equipment which may include security, fire alarm & life safety, and/or building automation with minimal guidance as needed. Work closely with customers and internal colleagues in providing technical installation support and training. May assist or train less experienced Electrical Installers. Refers more complex issues to more experienced colleagues. Interpret manuals, schematics, and wiring diagrams, and repairs equipment, utilizing knowledge of electronics and using standard test instruments and hand tools. Provide basic installation assistance as directed by project lead. Act as “our customer's best service provider” at all times thereby ensuring Convergint Technologies is the customer's first choice for service. Take ownership of onsite project including safety, quality and performance. Observe and practice Convergint Quality Standards. Make suggestions for installation methods to improve profitability and quality. Learn and perform tasks of an Electrical Installer III in order to progress through the trade program. Provide feedback to the Job-Lead regarding problems and anticipate time associated with an assigned task. Act as primary liaison to Project Lead. What You'll Need Experience installing and wiring access control, network cameras, door hardware, panel installation & wiring, and programming of door and camera additions. Solid Construction Skills and understanding of system plans. Solid understanding of blueprints, design drawings including wiring and labeling methods, system wiring, wiring methods, cut sheets, wiring schematics, and cable support installation (J-Hook, Raceway, Conduit, Cable Support). Very familiar with basic blueprints, schematics, manuals, and other specifications to determine installation procedures unassisted, may require assistance with more complex specifications. Strong customer focus and ability to work under pressure; ability to maintain awareness of, and seek to meet the needs and wants of the customer without being prompted. Solid mechanical and electrical aptitude (e.g. works with a variety of hand and power tools such as drill, screwdriver, wire stripper, hacksaw, crimper) and ability to read blueprints and drawings; solid math skills (for some positions, this may include calculating area, velocity, resistance, voltage, etc.). Solid verbal, written and interpersonal communication skills. The Electrical Installer will be responsible for providing basic hand tools as required to perform the daily tasks of the position. A valid driver's license with a clean driving record. Company Benefits Convergint fosters a supportive, accessible, and inclusive environment in which all individuals are able to realize their maximum potential within the company. We offer a variety of programs and exceptional benefits: 10 Company Holidays and Paid Time Off starting at 13 days annually Fun & Laughter Day Off Medical, Dental & Vision Plan Life insurance & Disability Plan Wellness Program 401K Matching Plan Colleague Assistance Program Tuition reimbursement Competitive salary and compensation plan Vehicle reimbursement plan or company vehicle Corporate Social Responsibility Day Cell phone reimbursement (if applicable) Paid parental leave Requirements: Education: High School/GED or equivalent experience Minimum Experience: 3-5 years in electronic security industry Previous construction experience including some level of electrical or a low voltage background CT Journeyman / Low Voltage License Preferred Experience (but not required): Relevant trade designation (e.g. Electrician) Experience in 1 or more of the following industries: electronic, fire alarm & life safety, and/or building automation Experience with Axis / Bosch / DMP / Lenel / Software House Certifications & Licenses: Project Management Institute (PMI); industry-specific certifications and/or Convergint is an Equal Opportunity Employer. Visit our Convergint careers site to learn more about the company and the exciting opportunities available. Please note that this job posting includes salary information for the assigned target market range within the primary geographic region the requisition is posted. If the position is posted in multiple locations or is a remote position, the salary range may vary. Individual pay rates will, of course, vary depending on the job, department, and location, as well as the individual skills, experience, certifications, specific licenses, and education of the applicant.