Journeyman jobs in South Carolina - 353 jobs

Francis Marion University invites applications for a Craftsman - Painter who, under general supervision, spends approximately 90% of time performing duties that require a high degree of skill and technical competence. Approximately 10% of the time is spent performing additional duties as assigned. Under general supervision, the successful candidate will be responsible for keeping the university facilities painted and in a high state of repair. Performs other skilled duties involved in the inspection, repair, and modification of buildings and equipment, procurement of tools, materials, and the scheduling and inspection of work. Other duties include, but are not limited to: * Develop, and maintain a computer-based library/log of paint colors, textures, and finishes for all rooms in all campus facilities. * Ensures proper preparation of surfaces to be painted is accomplished prior to painting. * Accomplishes repairs to buildings including, but not limited to sheetrock repair and installation, floor and wall coverings, and masonry. * Inspects work proposed to determine detailed requirements. Request tools, equipment, and materials needed. Proposes schedule to supervisor and follows through with customer feedback on job status. * Trains, supervises, and assists other craftsmen in painting. * Manages the repairs of building components and systems within assigned areas. * Uses multiple tools in various heights and spaces while observing all safety measures. * Making on-site preparations such as building scaffolding, covering fixtures etc. * Must be reliable and deft as well as possess great attention to detail in completing assigned jobs. State Requirements: A high school diploma and trade experience that is directly related to the area of employment. FM Preferences: High school diploma and four years of experience in related trades or crafts areas. Excellent knowledge of painting materials and how to select, mix and apply them. Solid knowledge of commercial and/or construction painting techniques. Aptitude in using appropriate tools (brushes, caulking guns etc.) Good basic math and computer skills. * A valid SC driver's license required. Salary: $39,300 (After July 1, 2025) State Classification: Trades Specialist IV (KC40) Position Information: Band 4 Level 1 Normal Working Hours: 7:00 A.M. - 3:00 P.M. (Monday - Friday). Summer hours will vary. Application Materials Needed: * Letter of Interest (Referencing Position Number 25-04). * Resume. * Copies of all relevant certificates and training. * The names, addresses, and telephone numbers of three references. * SC Driver's License (copy). * FM Staff Application. To obtain the FM Staff Application, please click here. Send Application Packet to: Dr. Charlene Wages, Vice President for Administration and Planning, Francis Marion University, PO Box 100547, Florence, SC 29502-0547 or FAX to **************. Review of applications will begin immediately and will continue until the position is filled. As Francis Marion University has continued to be recognized for its diverse student body, it especially welcomes applicants who can affirm and enhance its mission. Applicants honorably discharged from a branch of the United States Armed Forces, who meet the minimum training and experience requirements, are given employment preference by all State agencies and higher education institutions in SC. An Affirmative Action/Equal Opportunity Institution

Long Term Maintenance - No Per Diem Must pass pre-employment background and physical to include drug screen Must have state issued valid driver's license SUMMARY PIPEFITTER Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Lays out, fabricates, assembles, installs and maintains piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment for steam, hot water fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and production and processing systems. RESPONSIBILITIES - Selects type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications. - Inspects worksite to determine presence of obstructions. - Plans sequence on installation to avoid obstructions and activities of other workers. - Cuts pipe using hacksaw, pipe cutter, hammer and chisel, cutting torch and pipe cutting machine. - Threads pipe using threading machine. - Bends pipe by hand or with pipe-bending tools and machine. - Mounts pipe hangers and brackets on walls and ceiling to hold pipe. - Assembles and installs a variety of metal or nonmetal pipes and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints, and hand tools. - Secures pipes to structure with bracket, clamps, and hangers, using hand and power tools. - Installs and maintains refrigeration and air conditioning systems, including compressors, pumps, meter, pneumatic and hydraulic controls and piping, - Test piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. - Welds pipe supports to structural steel members. - May observe production machines in assigned area of manufacturing facility to detect machinery malfunctions. May operate machinery to verify repair. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of material and work pieces during installation. - Performs minor maintenance of cleaning activities of tools and equipment. - Respiratory protection is common and may be required. - Responsible for observing and complying with all safety and project rules. Perform other duties as required. Brown and Root Industrial Services also offers the following: Opportunities for advancement. Potential career growth into NCCER certified craft program with additional benefits of increase wages Paid holidays and vacation Elective medical, dental, vision, and supplemental benefits are available Supplemental medical premium contributions for qualified positions. Immediate 401(k) program with the employer matching the employee's first 3% contribution, and 50% of the employee's next 2% (vested immediately) Employee Quarterly incentive bonus program Work Schedule is Monday-Thursday 4 10 hour days Shift Only

About Us We perform installation, rigging, millwrighting, and maintenance for manufacturing and industrial markets across the Southeast. About us: Since 1962, Southern Industrial has helped install and maintain the manufacturing and industrial base that has fueled growth across the Southeast. We have grown from a Carolinas-based rigging company into the leading provider of rigging services, turn-key industrial construction, and plant maintenance services in the Southeast. As part of EMCOR Group, Southern Industrial's ability to serve our customers is enhanced by EMCOR's financial strength and national presence. Job Title: SIC Civil Journeyman (WILM L&L SU) Job Summary: Southern Industrial is looking for Civil Journeymen for a project in West Columbia, SC. Hired candidates will be considered for Benefits/Paid Time Off after 3 months. Essential Duties and Responsibilities: Establish building lines and control points from constructions drawings. Construct formwork and grade rod vertically and horizontal in proper alignments. Create control joints, Molds expansion joints and edges using a concrete saw, edging tools, jointers and straight edge. Install reinforcing steel and embeds according to construction drawings. Tie rebar, wire mesh and all support structures. Place concrete from a chute, Georgia buggy or a pump. Spreads concrete to specified depth and workable consistency, using float to bring water to surface and produce soft topping. Levels, smoothes, and shapes surfaces of freshly poured concrete, using straightedge and float or power screed. Finishes flat and sloped concrete surfaces, using power trowel, or wets and rubs concrete with abrasive stone to impart finish. Operates soil compaction equipment and concrete vibrator. Removes rough or defective spots from concrete surfaces, using power grinder or chisel and hammer, and patches holes with fresh concrete or epoxy compound. Application of concrete surface treatments, curing compounds and coatings. Direct sub grade work, mixing of concrete, and setting of forms. Follow set procedures and standards. Rate information using standards that can be measured or checked. Detect, recognize and respond to dangerous conditions or situations. Regular attendance is required. Significant travel may be required. Performs other duties as required. Qualifications & Skills: Skilled in both written and verbal communication. Complete all Safety and general job training as required by SIC. Observe SIC and Customer safety and quality processes and procedures at all times. Physical Requirements/Job Site Requirements: Must be able to effectively use all required PPE equipment and lift up to fifty pounds. Conditions include working in office, shop, busy traffic areas, warehouses, and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as, confined spaces. Strenuous physical demands are required to safely perform the essential functions associated with this position. Must be able to safely operate all involved equipment and tools. Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats, and working in awkward body positions. Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. #SIC #LI On-Site #LI-VB1 Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Overview The Labor Journeyman performs basic housekeeping on construction site. Responsibilities Labor Journeyman typical responsibilities and duties include, but are not limited to the following: - Perform setup and clean up tasks at job site, including removal of construction debris - Navigate construction job site terrain - Clean & sanitize jobsite trailers - Assist with basic deliveries & material storage - Housekeeping interior and exterior project site - Provide labor support as necessary for carpenters, masons, and other specialized contractors, work to be directed & planned by Foreperson - Reporting all safety incidents & injuries to Foreperson and Safety Leader - Any scope of work outside of they above listed, shall be planned, documented, and approved by Foreperson, Safety & Management Qualifications EXPERIENCE/EDUCATION - High school diploma or GED - Construction experience preferred - Or equivalent combination of education and experience - OSHA 10 hour certified recommended, (Next 150 Construction will assist with obtaining this certification if necessary) - Proof of certificates, degrees, etc. upon hire KNOWLEDGE, SKILLS & ABILITIES - Basic understanding of construction principles and procedures - Willingness to work in high-stress environment with extreme weather fluctuations - Ability to work in a team environment Next 150 Construction Services has an unwavering focus on safety, the environment and caring about everyone involved in our work. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Next 150 Construction Services is not accepting unsolicited resumes from third party recruiters at this time. Next 150 Construction Services is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Submit your resume and create a profile for general considerations. Share with your Network! Do you know anyone in your network who might be interested in joining the Next 150 Team? Click here to refer them ConnectWithNext150

JobID: 8906 JobSchedule: Full time JobShift: : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Plan, lay-out and perform all types of pipe fitting and fabrication work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Must have the ability to take direction from a higher skilled worker or foreman. Key Responsibilities 1. Continually seek opportunities to share knowledge and teach others. 2. Eliminate WASTE such as waiting, rework, transporting, material storage and time 3. High proficiency in all related trade mathematics. 4. Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. 5. Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others. 6. Maintain positive working relationships with all members of the crew. 7. Possess effective verbal and written communication skills. 8. Produce high quality work, safely and productively at all times. 9. Provide feedback to ensure all materials, tools, equipment and information is available for the work. Minimum Job Requirements 1. Must be able to read and understand drawings, specifications, safety and quality standards and effectively utilize all trade tools and equipment relevant to the work. 2. Must have a minimum of three years (level I), four years (level II), five years (level III) and six plus years (level Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the pipefitter trade. 3. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Move in and around confined, cluttered and uneven areas. 6. Must be able to comply with all safety standards and procedures 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. 9. Will lift, push or pull objects up to 50lbs. on an occasional basis 10. Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefits: Market Competitive Salary (paid weekly) Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting after 60 days of continuous employment Sick Leave and Paid Time Off (PTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

D.H. Griffin Contracting specializes in industrial equipment installation, relocation and removal, mechanical construction, technical and management services. Our focus on quality workmanship, timely performance, and safety have allowed us to work for premier facilities across the nation, ranging from auto manufacturing and aerospace to chemical and industrial plants. Job Description Our Columbia, SC Division is accepting applications for an experienced Journeyman (Millwright) who can use their knowledge and skills to install, dismantle, move machinery or heavy equipment according to layout plans, blue prints or other drawings. Job Responsibilities * Minimum of 4 years of industrial mechanical experience. * Ability to read and understand drawings, blueprints, schematics, e-plans and specifications. * Install, dismantle and move industrial machinery using various hand, power tools and heavy lifting equipment * Heavy and complex rigging knowledge and experience * Troubleshoot and make needed machine repairs * Precision layout and alignment using tight tolerances * Install ductwork and other utility services as required * Ability to work unsupervised for extended periods of time * Must adhere to safety policies and be a champion of safe work practices and policies. Skills and Qualifications * Strong knowledge and understanding of hydraulics, pneumatics, conveyance systems, motors and other industrial machine components is essential. * Fabrication and welding experience * Analyze and understand blueprints, layout plans, and schematics * Troubleshooting techniques to identify defects and machinery problems * Strong interpersonal skills to communicate with vendors, co-workers and customers * Ability to measure, calculate and apply geometric concepts * Ability to operate heavy machinery and aerial lifts to perform job duties * Set-up and operate precision layout tools and instrumentation * OSHA 10 preferred, but not required Compensation and Benefits D.H. Griffin Companies offer full benefits, including paid vacation and holidays, 401K w/ company matching, flexible spending program, health & dental through Blue Cross Blue Shield and more. Get rewarded for your achievements with a fair salary and advancement opportunities and appreciate a positive company culture. Compensation commensurate with experience. All employees must be able to pass E-verify, a background check and drug screening. Learn more about our company @ ****************** D.H. Griffin Wrecking Co. Inc. is an Equal Employment Opportunity Employer

Sylvamo, a major pulp and paper producer located in Eastover SC, is seeking its next generation of top Electrical & Instrumentation Maintenance Technicians for the Eastover, SC Mill. We are looking for dependable women and men with excellent problem-solving, communication and teamwork skills to fill our challenging positions. Sylvamo offers competitive salaries and excellent benefits including health care, life insurance, disability income, gainsharing, holidays, vacation, 401K and retiree savings. Experienced Mechanical Maintenance Journeyman Technician Hourly pay rate is $37.93 - $40.28 starting pay with opportunity to progress Duties for mechanics include, but are not restricted to, replacing valves & gaskets, basic welding, repacking pumps & valves, forklift operations, screwed pipe & tubing installations, cylinder repair, pump repair & replacement, repair of rotating assemblies, roll repair and replacements, motor replacements, repair of mechanical drive systems, gear reducers, seals, fans, hydraulics, pneumatics, lubrication and rigging. Minimum qualifications: High School Diploma or GED Basic computer skills Able to function in a team environment 5 years minimum experience in industrial setting performing as Mechanic or Millwright in a multi-skilled heavy industrial maintenance environment Must be able to pass hands on demonstrated skill test and written tests. PLUS: Must be willing to meet the following requirements: Undergo a drug screen for illicit use of drugs as a condition of employment Submit to periodic drug screens as a condition of employment Willing and capable of working all shifts Work overtime on a regular basis and with last minute notification Work holidays and/or weekends on a regular basis Wear required safety equipment Operate or work in industrial conditions (i.e. warm/hot, dusty/dirty, around hazardous chemicals, noise, heavy machinery or elevated working surfaces with proper safety training and safety protection) Preferred Requirements: Associate degree in a related discipline (Millwright, Machinist, Welding, OR Pipefitting) Relevant work experience in a heavy industrial environment Strong math/physics understanding Millwright/Machinist backgrounds on the mechanical side Apply on line at Sylvamo.com

Sylvamo, a major pulp and paper producer located in Eastover SC, is seeking its next generation of top Electrical & Instrumentation Maintenance Technicians for the Eastover, SC Mill. We are looking for dependable women and men with excellent problem-solving, communication and teamwork skills to fill our challenging positions. Sylvamo offers competitive salaries and excellent benefits including health care, life insurance, disability income, gainsharing, holidays, vacation, 401K and retiree savings. Experienced Mechanical Maintenance Journeyman Technician Hourly pay rate is $37.93 - $40.28 starting pay with opportunity to progress Duties for mechanics include, but are not restricted to, replacing valves & gaskets, basic welding, repacking pumps & valves, forklift operations, screwed pipe & tubing installations, cylinder repair, pump repair & replacement, repair of rotating assemblies, roll repair and replacements, motor replacements, repair of mechanical drive systems, gear reducers, seals, fans, hydraulics, pneumatics, lubrication and rigging. Minimum qualifications: High School Diploma or GED Basic computer skills Able to function in a team environment 5 years minimum experience in industrial setting performing as Mechanic or Millwright in a multi-skilled heavy industrial maintenance environment Must be able to pass hands on demonstrated skill test and written tests. PLUS: Must be willing to meet the following requirements: Undergo a drug screen for illicit use of drugs as a condition of employment Submit to periodic drug screens as a condition of employment Willing and capable of working all shifts Work overtime on a regular basis and with last minute notification Work holidays and/or weekends on a regular basis Wear required safety equipment Operate or work in industrial conditions (i.e. warm/hot, dusty/dirty, around hazardous chemicals, noise, heavy machinery or elevated working surfaces with proper safety training and safety protection) Preferred Requirements: Associate degree in a related discipline (Millwright, Machinist, Welding, OR Pipefitting) Relevant work experience in a heavy industrial environment Strong math/physics understanding Millwright/Machinist backgrounds on the mechanical side Apply on line at Sylvamo.com

Craftsman Benefits: Monday through Friday work week (8 am to 5 pm) - No weekend work. Positive work environment. Advancement into a well-paying lifelong career. Locally owned company with the backing of a national brand, Ace Hardware. Very competitive pay, performance bonuses, and vacation pay W-2 status with the flexibility of an independent job Vehicle and tool allowances Fun, collaborative environment Medical, Dental, Health insurance We are one of Columbia top-rated handyman, repair, and remodeling companies and have provided homes and businesses throughout Columbia with quality craftsmanship for all of their handyman needs. We are currently seeking a highly motivated professional Craftsman with skills in multiple trades. Are you a talented, multi-skilled Craftsman committed to quality work and customer service? Do you possess a strong will to complete all tasks assigned in a timely, professional manner? Are you an independent thinker with strong problem-solving skills, excellent communication skills, and a desire to enjoy the variety we offer? If so, success can be yours with our company! Apply now! The ideal Craftsman candidate will possess a good overall knowledge of all trades: Plumbing Carpentry Tile Electrical Additional Qualifications for this Craftsman Role: Proper Equipment: Not necessarily having every tool, but knowing what tools are needed for certain tasks. Troubleshooting Skills: Must be a quick thinker, able to examine issues and resolve them in a prompt and professional manner. Excellent Communication Skills: Must be able to communicate effectively with Management, Office Personnel, Fellow Employees, Homeowners, Suppliers, Property Managers and Commercial Customers. Be Presentable: Clean-Cut appearance Decent looking vehicle Organized tools Other: Look around the property and communicate to the customer things you could repair or things that our company can handle. Take the time to earn the customer's confidence and then inquire about additional work that could be performed. Sometimes, we take the time to fix something small and then point it out to the customer to help them understand that we are capable of doing more. Someone who is punctual and efficient maintains the highest integrity and strives for top customer satisfaction. Enjoys being an Integral part of a winning team. Demonstrates ability and willingness to EXCEED Customers' expectations. We pay our employees competitive wages, offer incentives, and the ability to grow with the company. If this sounds like the kind of position you've been looking for we want to hear from you. Apply today! Compensation: $1,000.00 - $1,400.00 per week The 800+ Craftsmen who represent our Brand are the heart and soul of our turn-key, white-glove home repair, maintenance, and improvement service. They are skilled and experienced in many trades, but their professionalism and attention to detail is what sets them apart from others who work in the industry. Most of the projects completed are for Repeat and Referral Customers-folks truly appreciate our high level of service, and they often request additional work by asking for particular Craftsmen by name. If you take great pride in your skills and abilities and wish to join a proven, winning TEAM, please apply to the position(s) available by selecting "Show Me All Jobs" above. Ace Handyman Services is a franchise network of Independently Owned and Operated Franchises. Your application will go directly to the franchise owner, and all hiring decisions will be made by the management of that franchise. All inquiries about employment at this franchise should be made directly to the franchise owner, and not to Ace Handyman Services Corporate.

SCOPE OF WORK Ability to lead and perform installations, alterations, additions, and/or repairs of electrical systems, conductors, and associated materials and equipment within the residential, commercial, and industrial electrical industry. Proficient in troubleshooting and proactively problem-solving electrical systems. POSITION REQUIREMENTS Uses Gaylor Values as tools to carry out all job responsibilities Understands and complies with Company and job safety requirements (O.S.H.A.) Understands and follows lock out tag out procedures Acquires and maintains personal hand tools per Company policy Certified to operate platform and boom lifts, or able to obtain certification upon hire Able to perform work at various heights, up to 90', from ladders, scaffolds, aerial lifts, cat walks, roofs, or other designated safe work areas Works from all assigned types of mobile elevated work platforms Able to accurately bend and install all types of conduit Understands use of degrees in bending conduit (i.e. concentric bending) Able to use two handed tools/equipment (i.e. cable cutters, hammer drills, compression tools, jack hammers, etc.) Understands and has ability to properly erect pulley systems to lift/move heavy equipment Possesses knowledge of and ability to properly give "hand signals" to operators Understands various types of switching of branch circuits (i.e. 3-way, 4-way, etc.) Possesses knowledge of circuit grounding practices, transformer connections, over-current protection, parallel circuits, fuse/circuit breakers, motors, cable trays and their supports Possesses knowledge of effects of soil on underground installations and cables Possesses knowledge of trench safety required during installation of underground conductors Possesses knowledge of other trades, including concrete, masonry, metals, and wood construction methods Possesses skill to accurately plan and install conductors in conduits and raceways Possesses knowledge of and ability to accurately install electrical devices and fixtures in a timely manner Able to work in restrictive/tight areas (i.e. switchgear rooms, crawl spaces, utility tunnels, attics, etc.) Able to install switchgear and perform the required terminations Has experience in terminations/splicing up to and including 600 volts Possesses technical knowledge, safety knowledge, and ability to work with live and energized parts Leads and assists in all types of wire pulls (i.e. conduit, cable tray, floor ducts, wire way, etc.) Understands verbal instructions and heeds safety warnings Demonstrates and exhibits proper use and safe handling of tools, equipment, and materials Reads and understands labels, job site maps/directions, instruction manuals, and written instructions Possesses knowledge of blueprints, shop drawings, ladder logic diagrams, and has ability to visualize completed work prior to installation Understands and complies with NEC, state, and local codes Understand basic math and can properly read tape measure Able to add, subtract, divide, multiply, and accurately use electrical formulas Takes pride in craftsmanship RESPONSIBILITIES Reports to assigned job site location on time, as directed Maintains and properly stores tools, materials, and equipment Organizes materials and tools to maintain clean and neat work area Possesses ability to dig trenches, either by use of hand tools or equipment as necessary Mounts and installs assigned hardware (such as conduit, wires, and strapping) as directed Accurately identifies colors of wires and conductors Plans, schedules, and organizes tasks to meet deadlines Accurately interprets electrical construction drawings, terminates cables, installs, and trouble shoots control wiring from schematics Completes routine daily inspections of equipment and work areas to verify accurate and timely installations Completes and documents regular safety inspections, as assigned Accurately and effectively directs and trains Helpers and Apprentices in proper work practices to meet production requirements Safely performs assigned tasks with limited supervision WORKING CONDITIONS May require working in all elements (heat, cold, rain, snow, etc.) depending on job location and/or time of year Must be able to utilize construction site sanitary facilities (port-o-lets) Must have required hand tools at all times while at work site (waist tool belts can weigh up to 30 lbs.) Must be able to work scheduled hours as well as overtime, as required, on short notice Must be able to work in noisy environments Must be able to remain calm in times of heightened emotional situations Must work well with others as a member of a team to complete tasks PHYSICAL REQUIREMENTS Must be able to wear personnel protective equipment (i.e., hard hat, safety glasses, gloves, high visibility vest, safety harness, etc.) when required Ability to stand, bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overhead for extended periods of time Ability to lift loads of up to 51 lbs. Repetitive use of arms, hands, and fingers Ability to climb and use ladders and scaffolding of all types for extended periods of time Possess good vision/hearing (normal or corrected) Ability to make transition from designated employee parking areas to construction areas and be able to gain access to all levels of building/structure, even if only means of access is by OSHA approved site construction ladder or stairs still under construction but deemed safe for use Ability to work while constantly moving Ability to reach and stretch to position equipment, fixtures, etc. while maintaining balance Ability to use both hands simultaneously for tying knots and for proper use of power equipment Must be able to see color to discern color-coded wiring Must be physically capable of pulling wires and cables through conduits EDUCATION High School graduate or equivalency, preferred EXPERIENCE Accredited Apprenticeship Program completion or six years on the job electrical experience required Journeyman License requirement in states, locales, or projects, as required

Amteck is currently looking to add Electricians for our project in St. George, SC. We offer long-term opportunities as well as steady work, benefits and a 401K. After completion you will be able to move to another project within Amteck. We are looking for people who are interested in working with a company that promotes growth and longevity within the trade. You will have the ability to diversify your electrical skill set with being able to learn others within Amteck. We have training for low voltage, fire alarm, controls, and instrumentation among other skill sets. Apply today to learn more about the opportunity! Requirements include but aren't limited to the following: 5+ years of electrical experience on commercial or industrial sites Ability to install conduit, wire and cable systems as required Ability to read and interpret blueprints Ability to install and terminate panels, switchboards and other electrical equipment Ability to troubleshoot and perform repairs on faulty circuits, equipment or systems OSHA10 preferred but not required I n 1977 Amteck was founded in Central Kentucky with the belief that growth only comes by listening and responding to both clients and employees. Four decades later, Amteck has grown from a small electrical contracting firm to a national leader in the design/build support electrical contracting industry. Amteck specializes in facility growth expansion initiatives of companies that operate in the manufacturing, industrial, process, food, and beverage, hospitality, healthcare, distribution facilities, and commercial and institutional sectors. The number one goal is the Safety of our Employees and maintaining our culture and core values: THE AMTECK WAY - SAFETY, QUALITY, & CUSTOMER SATISFACTION.

Now Hiring: Industrial Electricians - Anderson, SC Pay: $30 per hour Schedule: 50+ hours per week | Overtime Available We are actively seeking experienced Industrial Electricians for ongoing work in Anderson, South Carolina. This is a great opportunity for motivated electricians looking for steady hours, competitive pay, and a team-oriented work environment. Position Overview: Industrial Electricians will be responsible for installing, maintaining, and troubleshooting electrical systems in an industrial setting. Candidates must be dependable, safety-focused, and capable of working in a high-paced environment. Key Responsibilities: Install and terminate conduit, wiring, and electrical panels Read and interpret electrical schematics and blueprints Troubleshoot and repair motors, control systems, and other industrial equipment Perform testing and inspections to ensure code compliance Maintain and document work on electrical systems Follow OSHA and site-specific safety procedures Requirements: 3+ years of experience in industrial electrical work Strong knowledge of the National Electrical Code (NEC) Ability to read and interpret wiring diagrams and technical documents Proficiency with tools and equipment used in electrical installations Reliable transportation to the job site in Anderson, SC Willingness to work 50+ hours per week, including overtime We Offer: $30 per hour, paid weekly Overtime (time and a half after 40 hours) Consistent 50+ hour workweeks Long-term project opportunities A safety-first, team-driven work environment

Multi-skilled Carpenters - Ace Handyman Services Grand Strand name here needs your expertise! We are one of the Grand Strands top-rated handyman, repair, and remodeling companies. We will be providing homes and businesses throughout the Grand Strand with quality craftsmanship for all of their repair, maintenance, and remodeling projects - both large and small - inside and outside. We are currently seeking highly motivated professional Carpenters with skills in multiple trades.If you are looking for a W2 position that allows you the flexibility of an independent job, look no further! We find and schedule the jobs for you, and you provide the quality craftsmanship and customer service that our clients have come to expect from us. You will work out of your home on your choice of a full time or part-time basis, using your own truck or van to travel to job sites in Horry County and nearby areas. Potential for company vehicle.Your potential income can range from $20-$25, per hour based on experience and skill level, and we also provide benefits and performance bonuses. If this sounds like the kind of position you've been looking for, and if you meet our qualifications, we want to hear from you. Contact us today! Must pass background check and drug test.Here is just some of what we have to offer: Health insurance Vacation Performance bonuses Vehicle and tool allowance Cell phone reimbursement (if applicable) Company credit card for job supplies Flexible scheduling Advancement and growth opportunities Regular pay reviews Consistent year-round work Plus more! Job RequirementsWe are looking for Carpenters with a strong work ethic, a professional appearance and demeanor, and a good overall knowledge of all trades-from Carpentry, Tiling, Painting, and Drywalling to light Plumbing and Electrical. You must also display excellent customer service skills, including solid communication and interpersonal abilities, and the ability to interact in a positive way with a wide variety of different types of clients, as well as fellow employees, management, and office personnel.Specific qualifications for the role include: Successful prior track record as a Carpenter / Craftsman; estimation skills and prior home inspection experience, strongly preferred Ability to perform minor electrical and plumbing Own standard set of tools to perform all of the above trades Own truck or van Current and valid driver's license Residence within 15 miles of Horry County Excellent troubleshooting, analytical, and problem-solving skills Strong documentation and invoicing skills Professional appearance and demeanor Ability to pass a background check and drug screen Take control of your schedule, your earnings and your career! Apply now! Compensation: $20.00 - $25.00 per hour The 800+ Craftsmen who represent our Brand are the heart and soul of our turn-key, white-glove home repair, maintenance, and improvement service. They are skilled and experienced in many trades, but their professionalism and attention to detail is what sets them apart from others who work in the industry. Most of the projects completed are for Repeat and Referral Customers-folks truly appreciate our high level of service, and they often request additional work by asking for particular Craftsmen by name. If you take great pride in your skills and abilities and wish to join a proven, winning TEAM, please apply to the position(s) available by selecting "Show Me All Jobs" above. Ace Handyman Services is a franchise network of Independently Owned and Operated Franchises. Your application will go directly to the franchise owner, and all hiring decisions will be made by the management of that franchise. All inquiries about employment at this franchise should be made directly to the franchise owner, and not to Ace Handyman Services Corporate.

We are seeking experienced Journeyman Electricians in the Beaufort Area Allegiance Industries is a full-service electrical contractor serving the commercial, industrial and retail markets in North Carolina and South Carolina. Our professional staff of experience project managers, estimators and electrical professionals offer exceptional service and quality workmanship in a wide array of projects including new construction and renovation. Responsibility & Authority Perform all duties in accordance with company safety rules, operating regulations and practices and report unsafe conditions or acts Install, connect, test, and maintain electrical systems for a variety of purposes, including lighting, climate control, security, and communications Work with blueprints when installing electrical systems in manufacturing facilities, waste water treatment plants and other structures Able to indicate on blueprints the location of circuits, outlets, load centers, panel boards, and other equipment Install new electrical equipment Maintain and repair electrical systems as quickly as possible in order to minimize inconvenience Able to replace items such as circuit breakers, fuses, switches, electrical and electronic components, or wires Responsible for performing the installation of various electrical systems per NEC state/local regulations and complete construction documents while maintaining the highest levels of OSHA compliance May orient and train new workers Other duties as assigned Qualifications Knowledgeable in raceway installations in accordance with NEC and manufacturer requirements to include PVC, RSC, EMT, IMC, and Cable tray. Knowledgeable in cable/conductor installations in accordance with NEC and manufacturers requirements to include, but not limited to THHN, XHHN/XHHW, MI, VFS-cable and control wiring. Knowledgeable in grounding installations in accordance with NEC requirements. Perform maintenance duties involving mechanical operations as well as electrical equipment. Perform preventative maintenance such as changing contacts and checking motors. Troubleshoot and repair electrical and electronic systems on any converting plant equipment including any electromechanical production equipment. Ability to install, maintain, and troubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods. Ability to install, maintain, and troubleshoot relay logic, ladder diagrams, control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tachs, and encoders PLC programs, ability to troubleshoot ladder logic (read use for troubleshooting), components (CPU back plains, I/O boards, counters, modules, and devices) and communications modules (Ethernet) Basic understanding of program controllers Knowledgeable of National Electric Code and comply with State and local building codes when they install electrical systems Able to understand and perform calculation on de-ratings and loads Capable of calculating size and installation methods for specialty transformers Knowledgeable of high voltage terminations/splices standards in accordance with NEC and cable manufactures requirements

Company Mission Statement: To build up our communities, our clients, and each other by building trust in everything we do. Summary/Objective: Supports the company mission statement by working as part of a crew on interior renovation and self-performance projects. This role focuses on demo, drywall, framing, door installation, finish carpentry, light plumbing, and general jobsite support. The ideal candidate is a well-rounded handyman type, capable of handling a variety of tasks, maintaining clean job sites, and contributing to efficient project execution. HarperXS is focused on executing construction projects within active facilities and occupied spaces. It is the expectation of HarperXS that candidates be experienced working within this industry. HarperXS fully expects candidates to be willing to comply with client requirements and educate themselves on the conditions and expectations of working within their facilities. Essential Functions: Demolition and site preparation Perform demo work (drywall, millwork, sinks, cabinets, interior finishes). Maintain jobsite cleanliness and organization (a key priority). Framing and drywall Build and repair walls, including metal stud framing. Install and repair drywall, complete patching and finishing. Door and finish installation Install doors, hardware, and related interior finishes with precision. Support installation of miscellaneous interior items as required. Plumbing (Basic) Perform minor plumbing tasks (e.g., sink removal/installation, fixture work). Recognize when to escalate more complex plumbing tasks. General carpentry and misc. tasks Perform light carpentry work to support interior renovations. Assist with installing handrails, grating, supports, or other interior items. Tools and equipment Start with a basic personal tool set (e.g., drill/driver kit); the company provides most additional tools. Safely use power and hand tools as required. Scaffolding and form work Use Baker scaffolds and basic ladders as needed (minimal scaffold erection). Perform minimal form work; training provided where applicable. Competencies: Demonstrate flexibility and accept change often. Must be detail oriented with the ability to follow instructions. Manage multiple tasks and meet deadlines consistently. Able to solve complex problems. A “Can Do” attitude. Responsible, dependable, and safety conscious. Able to work independently and take initiative (like current high-performing crew members). Team player who can communicate effectively; bilingual ability is a plus. Must be punctual and dependable. Supervisory Responsibilities: None. Work Environment: This position is required to work in a variety of conditions related to construction jobsite environments and must be able to perform the physical requirements of the job, as assigned. Exposure to weather, heat, etc. is expected. Physical Demands: Must be able to physically perform the basic functions of climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions. Must be able to perform medium work exerting up to 100 pounds of force occasionally, and/up to 20 pounds of force frequently, and up to 20 pounds of force constantly to move objects. Must possess the visual acuity to operate equipment and motor vehicles, perform trades tasks, inspect the work of others and review work for accuracy, neatness and thoroughness. Travel Required: Travel to/from multiple jobsites, projects, and offices. Minimal overnight or weekend travel. Valid US driver's license required. Benefits: Competitive Benefits Package 401(k) Transparency in growth, pay, etc. Community Involvement Performance Feedback Teambuilding Events Additional Eligibility Requirements: None. Work Authorization/Security Clearance Requirements: Authorized to work in the United States. Affirmative Action/EEO statement: Harper GC provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Harper GC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina with offices spanning the United States, primarily southeast and central United States. Position Description Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems, applying knowledge of system operation, and following blueprints. This will be completed in a safe and timely manner with the highest quality possible. Job Responsibilities * Select type and size of pipe, and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to specifications. * Plan installation or repair to avoid obstructions and to avoid interfering with activities of other workers. * Cut pipe using saws, pipe cutter, hammer and chisel, cutting torch, and pipe-cutting machine. * Thread pipe using pipe-threading machine. * Bend pipe using pipe-bending tools and pipe-bending machine. * Assemble and install variety of metal and nonmetal pipes, using threaded caulked, soldering, brazen, fused, or cemented joints and hand tools. * Secure pipes to structure with bracket, clamps, and hangers, using hand tools and power tools. * Install and maintain hydraulic and pneumatic components or machines and equipment, such as pumps and cylinders using hand tools. * Install and maintain compressors, pumps, meters, pneumatic and hydraulic controls, and piping, using hand tools and power tools, and following specifications and blueprints. * Increase pressure in pipe system and observe connected pressure gauge to test system. * May weld pipe supports to structural steel members. * May observe production machines in assigned area of manufacturing facility to detect machinery malfunctions. * May operate machinery to verify repair. * Respiratory protection is common and may be required. * Responsible for observing and complying with all safety and project rules. * Other duties as assigned. Job Qualifications * Must be at least 18 years of age. * Must pass written Pipe Fitter test. * Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor. * Utilize basic math and a calculator to solve geometric problems associated with Pipe Fitting. * Must be able to lift up to 50 pounds, climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments. * Must be willing to work outside of craft. * Candidate may be required to pass a drug test and criminal background check based on job location/requirements. * Required Tool List for Pipe Fitter: * 1 each 10" & 12" Crescent Wrench * 2 each 14" & 18" Pipe Wrenches * 1 each Torpedo Level * 1 each 2' Level * 1 each Chalk Box * 1 set Box Wrenches up to 1 ¼" * 1 each Channel Lock Pliers * 1 set Allen Wrenches * 1 each Wrap Around * 1 each 25' & 50' Tape Measure * 1 each Hammer * 1 each Hack Saw and Blade * 1 each Tri-Square * 1 each Plumb Bob * 1 each Framing Square * 1 each Burning Glasses * 1 each Center Punch * 1 each Tubing Cutter * 1 each Pipe Fitters Book and Calculator * Must be at least 18 years of age * Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively * Work in hot/cold/damp/cramped environments * 40 or more hours per week with possible weekend work * Background check and drug screen based on job location/requirements Benefits * We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************** Email: *********************************** Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English To see other positions, click here.

Job Description "Your customer doesn't care how much you know until they know how much you care!" Founded in 1976, and based out of Alexandria, VA, Michael and Son Services, Inc. is the premier provider of Electrical, Plumbing, HVAC, and Restoration services in Maryland, Virginia, and North Carolina. Do you have high standards for excellence and a desire to succeed? Are you looking for an employer who is willing to invest in you and your professional growth? If so, you've come to the right place, WE are looking for YOU! We're seeking experienced Residential Plumbers for our Myrtle Beach office. In this role, you will be responsible for installing, repairing, and maintaining pipes, valves, fittings, drainage systems, and fixtures in residential properties. Why should you work as a Residential Plumber for the Michael and Son family? Our residential plumbers have the potential to earn up to 150k annually Upon successful completion of training, you will receive A FULLY-STOCKED TAKE HOME service truck with paid automotive insurance, gas card, company cell phone, and tablet for paperless ticketing and dispatching. Industry-leading training programs to sharpen your skills. Rotating on-call hours that work with your schedule for greater work/life balance We're invested in your success! We offer extensive opportunities for growth and advancement. Check out this short video for a sneak peek into our company culture: ******************************************* Michael and Son also offers a competitive benefits package, including: Medical insurance Dental insurance Vision insurance Flexible Spending Account (FSA) Short term/Long term disability insurance Life insurance Matching 401(k) Retirement Savings Plan Referral bonus program (Earn up to $2,000) Uniforms Provided - Weekly Laundering program Employee discounts We're searching for someone with a good command of English, at least a high school education, a valid driver's license, excellent customer service skills, and, ideally, a SC plumbing license. Is that you? #MBPLUM2 Any job offer is contingent upon the results of a background check and drug test.

Job DescriptionJoin a great team! We are currently looking for a full time Residential Plumber to help us with new construction and high-end renovation projects. Schedule is Monday-Thursday with some overtime on Fridays as needed. Commercial experience is a bonus! We don't do service calls but we do value that experience! The Residential Plumber is responsible for assisting the plumbing team execute daily field operations. Under the direction of the Plumbing Manager, the person in this position takes ownership of plumbing installations, cleanliness of job-sites, cleanliness of truck, and maintenance of tools and equipment. The Residential Plumber is expected to communicate well with teammates and customers during all stages of each project. Candidates with a great work ethic and positive attitude are encouraged to apply! E04JI800gmdo 401orec

Job description Journeyman Pipe Fitter OpSource has partnered with a Renfrow Industrial Fab Shop located in Spartanburg, SC.* * 28.00 to 32.00/hour * * 700 AM to 530 PM 50 Hours per Week * Job requirements for the position may include:* Selects the type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications. Inspects the worksite to determine the presence of obstructions. Plans sequence on installation to avoid obstructions and activities of other workers. Cuts pipe using a hacksaw, pipe cutter, hammer, chisel, cutting torch, and pipe cutting machine. Thread pipe using threading machine. Bends pipe by hand or with pipe-bending tools and machines. Mounts pipe hangers and brackets on walls and ceiling to hold the pipe. Assembles and installs a variety of metal or nonmetal pipes and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints, and hand tools. Secures pipes to structure with brackets, clamps, and hangers, using hand and power tools. Tests piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. Performs minor maintenance of cleaning activities of tools and equipment. Observes and complies with all safety and project rules and all company policies and procedures Performs other duties as required. * Qualifications for the position:* High school diploma/GED. Trade school education or apprenticeship. Proven experience as a Pipe Fitter. (If not NCCER certified MUST pass a pipe fitter test) Excellent mechanical and troubleshooting skills. Ability to prioritize and maintain strong attention to detail. #ST