Top Junior Engineering Technician Skills

Below we've compiled a list of the most important skills for a Junior Engineering Technician. We ranked the top skills based on the percentage of Junior Engineering Technician resumes they appeared on. For example, 17.2% of Junior Engineering Technician resumes contained CAD as a skill. Let's find out what skills a Junior Engineering Technician actually needs in order to be successful in the workplace.

The six most common skills found on Junior Engineering Technician resumes in 2020. Read below to see the full list.

1. CAD

high Demand
Here's how CAD is used in Junior Engineering Technician jobs:
  • Total PLC Logic and Relay Logic / Control Panel Fabrication form AutoCAD Electrical diagrams.
  • Worked on revising structural models in Auto Cad and Revit.
  • Produced architectural AutoCAD drawings *Performed general administrative duties
  • Developed partnership for research by attending technical conferences and engaging both academics at local universities and company-wide R&D department.
  • Utilized schematic capture using ORCAD Schematic Design Tools for hand drawn schematics to remedy historical manufacturing errors for microprocessor based board.
  • Created detailed AutoCAD diagrams with installation/removal instructions to aid field technicians in the installation/removal of telecommunications equipment.

Show More

2. Test Procedures

high Demand
Here's how Test Procedures is used in Junior Engineering Technician jobs:
  • Perform test procedures and reading/interpreting schematics down to component level by applying technical expertise for highest quality and accurate results.
  • Involved with adaptation and design of complex test equipment and development of related test procedures and documentation.
  • Conducted power checking test procedures and equipment to verify electrical and mechanical integrity of units assembled.
  • Provide final qualification of software, hardware, and documentation by accurately following test procedures and/or utilizing automated test equipment.
  • Witnessed ship electronic, piping, and mechanical system operational test procedures to ensure contractual compliance IAW applicable Ship Specification.
  • Developed and reviewed test procedures and test reports, interpreting customer and industry specifications.

Show More

3. Prototype

high Demand
Here's how Prototype is used in Junior Engineering Technician jobs:
  • Perform prototype and multi-aircraft modifications.
  • Help with prototype runs, design of Cut-In-Place tooling, waterfall stackers and other prototype tooling.
  • Worked closely with Engineers in a 12-person development lab integrating mechanical gyros to build prototypes for new product development.
  • Worked remotely with Canadian team members to procure and expedite components to Mexico production facility for urgent prototype builds.
  • Assisted engineers in assembling breadboards, circuit design, and circuit optimization on prototype products to validate products functionality.
  • Support electrical engineers with prototyping activities including mock-ups, testing, debugging, building and modifying for Prototypes/new products.

Show More

4. Set-Up

high Demand
Here's how Set-Up is used in Junior Engineering Technician jobs:
  • Test set-ups, micro probing.

Show More

5. Electrical Systems

high Demand
Here's how Electrical Systems is used in Junior Engineering Technician jobs:
  • Interpret technical drawings and specifications of electrical systems when installing ADNS architecture to conform to federal and corporate standards.
  • Developed complete electrical systems schematics.
  • Overhaul, repair, assembly, troubleshooting and testing turbo machinery products incorporating mechanical, hydraulic, pneumatic and electrical systems.
  • Performed all aspects of automotive and light truck mechanical service and repair including complex diagnostics of computer and electrical systems.
  • Perform maintenance of vehicles including repairing engine failures; repairing mechanical and electrical systems malfunctions; replacing parts and components.
  • Performed planned and unplanned maintenance on aviation ground support equipment including mechanical, hydraulic, pneumatic, and electrical systems.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Data Entry

average Demand
Here's how Data Entry is used in Junior Engineering Technician jobs:
  • Performed all basic histology and cytology techniques including maintenance of instruments and data entry of patient information.
  • Performed data entry of referral authorization, outpatient surgeries, inpatient procedure and admissions.
  • Schedule doctor appointments for residents Skills Used Computer skills Effective communication skills Accurate data entry
  • Job responsibilities included preparation of loan document using proprietary systems through accurate data entry.
  • Worked with computer data entry, customer requirements/specification and other applicable quality requirements.
  • Assisted appraisers with data entry information and editing of the computerized appraisal system.

Show More

7. Data Collection

average Demand
Here's how Data Collection is used in Junior Engineering Technician jobs:
  • Assist in data collection and processing of inertial confinement fusion experiments.
  • Assist in data collection and conducting necessary engineering testing of products and processes during qualification and validation.
  • Developed a structured technical data collection curriculum to include manuals, policies and operating procedures to train new data collection personnel.
  • Developed comprehensive instructions on sign-sheeting materials testing and redesigned data collection forms for consistency with the flow of materials testing methods.
  • Worked with manufacturing and process engineers in material evaluation, data collection and writing process instructions.
  • Project Leader to development and deploy new data collection software to revitalize data collecting/testing hardware.

Show More

8. Assembly Drawings

average Demand
Here's how Assembly Drawings is used in Junior Engineering Technician jobs:
  • Generate documentation, including assembly drawings, manufacturing instructions, schematics and end-user installation instructions.
  • Developed prototype models of digital and analog electronic circuits along with electrical and assembly drawings for production.
  • Created and revised Electrical/Mechanical Assembly drawings and Work Instructions from client specifications for production and engineering.
  • Troubleshooted, debugged and repaired defective boards using circuit schematics and assembly drawings.
  • Utilize electrical schematics and mechanical assembly drawings, sketches, with engineering specifications.
  • Produced detailed component and assembly drawings of electrical circuit protection/distribution products for manufacture.

Show More

9. QA

average Demand
Here's how QA is used in Junior Engineering Technician jobs:
  • Coordinated manufacturing schedule from QA reliability testing to final Military source inspection by off.
  • Document failure analysis Work with project engineer, manufacturing engineer, and QA to ensure customer specification compliance.
  • Supervised QA/QC field and laboratory testing/inspection for construction and engineering projects.
  • Serve as landfill construction QA manager and oversee environmental subcontractors.
  • Participate in or lead QA improvement projects and developing failure analysis procedures.
  • Completed QA/QC on laboratory procedures to verify compliance with project specifications.

Show More

10. Hvac

average Demand
Here's how Hvac is used in Junior Engineering Technician jobs:
  • Maintained a variety of HVAC units systems to protect against inefficient operation and physical deterioration.
  • Provided HVAC, plumbing and electrical residential and commercial installations and maintenance.
  • Review construction drawings and make recommendations for HVAC specifications.
  • Diagnosed and repaired commercial HVAC, refrigeration and kitchen equipment
  • Performed annual maintenance on residential and commercial HVAC equipment.
  • Conducted troubleshooting on residential and commercial HVAC equipment.

Show More

11. Ensure Accuracy

average Demand
Here's how Ensure Accuracy is used in Junior Engineering Technician jobs:
  • Developed and implemented a program using Microsoft Excel to ensure accuracy of the cost of highway patching operations.

Show More

12. PCB

low Demand
Here's how PCB is used in Junior Engineering Technician jobs:
  • Performed failure analysis on PCB circuit boards using electronic test instruments such as spectrum analyzer, digital oscilloscope, spectrum analyzer.
  • Performed Engineering Evaluations and Reliability Testing using Metallurgy techniques and Environmental Chambers for PCB's, Semiconductors, discrete components.
  • Maintained a working supply of prototype/existing product PCB boards for Software Developers to develop software.
  • Completed company-wide EMC simulation and verification study that optimized internal PCB design practices.
  • Supported manufacturing quality and customer return activities by performing PCBA and component level electrical verification and physical analysis.
  • Experience in solid PCB soldering, wire harness assembly and component-level electrical circuit troubleshooting

Show More

13. SMT

low Demand
Here's how SMT is used in Junior Engineering Technician jobs:
  • Reworked boards including hand soldering, SMT and BGAs.
  • Performed mechanical and programming counter measures on Fuji SMT and Universal axial placement equipment during production runs.
  • Performed recovery counter measures on SMT placement equipment.
  • Managed process improvements utilizing SMT program development and root cause defect analysis.
  • Developed and implemented new automated SMT assembly configuration to maximize assembly efficiency.
  • Supported engineering/production in building module for SMT process.

Show More

14. RAN

low Demand
Here's how RAN is used in Junior Engineering Technician jobs:
  • Provided on-sight quality assurance and quality control testing in accordance with ASTM and ACI standards.
  • Prepared pay estimates, insured compliance in accordance to the Disabled Veterans regulations.
  • Center housing every part & every batch 5 pieces random checking.
  • Provide a wide range of real-time embedded software engineering to functions and support avionics architecture development missile and vehicle integration.
  • Developed and implemented program of photographic documentation of lab projects that improved the professional appearance and content of customer reports.
  • Manage customer services, returns, and warranty departments while maintaining unparalleled levels of customer satisfaction.

Show More

15. Onsite

low Demand
Here's how Onsite is used in Junior Engineering Technician jobs:
  • Provide onsite daily repair and renovation of medical rooms, waiting rooms, exam rooms and etc.

Show More

16. Configuration Management

low Demand
Here's how Configuration Management is used in Junior Engineering Technician jobs:
  • Assisted in configuration management by converting old drawing into digital format.
  • Implement Configuration Management using tabletop verifications to input Master Equipment List Records for installed components..

Show More

17. Technical Support

low Demand
Here's how Technical Support is used in Junior Engineering Technician jobs:
  • Provided remote, third-party, Tier I technical support for companies around the country.
  • Provide engineering/technical support for non-conformance investigations.
  • Provided technical support to various customers and telecommunication companies to troubleshoot their analog/digital phone services and data communications on DS0-DS3 services.
  • Provided customer and technical support for customers seeking custom designed solutions including automatic pouring ladles and robotic pouring systems.
  • Demonstrated strong leadership skills while simultaneously providing critical technical support, focusing on servers and networking gear.
  • Provided tier3 and tier4 support for level 1 technical support technicians troubleshooting wireless configuration when needed.

Show More

18. On-Time Completion

low Demand
Here's how On-Time Completion is used in Junior Engineering Technician jobs:
  • Excelled within deadline-intensive environment, ensuring accurate and on-time completion of all projects.

Show More

19. Engineering Support

low Demand
Here's how Engineering Support is used in Junior Engineering Technician jobs:
  • Identify opportunity areas in the process in order to provide optimization strategies, replacements, modifications and technical engineering support.
  • Provided engineering support to mass market program by updating refrigeration deemed measure work papers for energy efficiency rebate catalog.
  • Provided engineering support to Sr. level consulting staff to help midstream companies optimize gathering system capacity and available compression.
  • Provided civil engineering support to Amoco Production, Amoco Oil and Amoco Chemicals and Provided structural damage assessment service.
  • Provided engineering support in design, quality control and installation of various power distribution and control unit systems.
  • Provided quality-engineering support in the advanced fuel facility, source inspection, product disposition and procurement support.

Show More

19 Most Common Skill for a Junior Engineering Technician

CAD17.2%
Test Procedures7.5%
Prototype7.5%
Set-Up6.5%
Electrical Systems6.5%
Data Entry5.4%
Data Collection5.4%
Assembly Drawings5.4%

Typical Skill-Sets Required For A Junior Engineering Technician

RankSkillPercentage of ResumesPercentage
1
1
CAD
CAD
17.2%
17.2%
2
2
Test Procedures
Test Procedures
7.5%
7.5%
3
3
Prototype
Prototype
7.5%
7.5%
4
4
Set-Up
Set-Up
6.5%
6.5%
5
5
Electrical Systems
Electrical Systems
6.5%
6.5%
6
6
Data Entry
Data Entry
5.4%
5.4%
7
7
Data Collection
Data Collection
5.4%
5.4%
8
8
Assembly Drawings
Assembly Drawings
5.4%
5.4%
9
9
QA
QA
4.3%
4.3%
10
10
Hvac
Hvac
4.3%
4.3%
11
11
Ensure Accuracy
Ensure Accuracy
4.3%
4.3%
12
12
PCB
PCB
3.2%
3.2%
13
13
SMT
SMT
3.2%
3.2%
14
14
RAN
RAN
3.2%
3.2%
15
15
Onsite
Onsite
3.2%
3.2%
16
16
Configuration Management
Configuration Management
3.2%
3.2%
17
17
Technical Support
Technical Support
3.2%
3.2%
18
18
On-Time Completion
On-Time Completion
3.2%
3.2%
19
19
Engineering Support
Engineering Support
3.2%
3.2%

22,827 Junior Engineering Technician Jobs

Where do you want to work?