Aircraft Mechanic jobs at Kay Management Co - 310 jobs

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Ordnance) Task Description: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Ordnance and related sub-systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic II shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: * Familiar with duties assigned to personnel within all work centers. * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Scheduled and unscheduled maintenance. * Maintenance Control planning and management. * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Support Equipment (SE operation and inspections. * Corrosion Control/Aircraft Painting. * Troubleshooting * Preservation/de-preservation. * General Aircraft Maintenance. * Ordnance handling, limited to unjamming related equipment/ALSS maintenance. * Technical Directive compliance and modifications. * Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. * Maintain Aircraft, Engines, and SE Logbooks. * Aviation Life Support System (ALSS) Maintenance. * Central Technical Publications Library Programs Management * Dispersed Technical Publications Librarian * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. PREFERRED QUALIFICATIONS: * Ten or more years' experience with NALCOMIS/OOMA * Ten years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Familiarity and ability to use military tech manuals. * Advanced Corrosion Control Course * Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: * Individual (I) Aircraft Maintenance Qualification * AO "C" school, FRAMP training for Navy attack/fighter aircraft or USMC/USCG equivalent, and conventional weapons loading school * Must be familiar with aircraft conventional ordnance, ordnance, ordnance launching mechanisms, armament loaders and associated special and general support equipment * Must have three years' experience working "O" level aviation ordnance, one of which must have been with last three years * Must be certifiable to drive five-ton ordnance truck * Must pass annual medical screening and physical administered by doctor * New hire personnel should have five years' aviation maintenance experience on applicable T/M/S aircraft * Six years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Must have valid driver's license * Must be eligible to qualify for and maintain SECRET level security clearance * Must be able to work 1st, 2nd, 3rd and weekend shift schedule as required. * Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. * Must be able to pass a background check. * Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance". * Must be able to climb ladders, raised platforms, and aircraft. * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $50.91/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

RIDE MECHANIC: $18-$25+ per hour Job Type: Full- Time WHAT WE PROVIDE: Join our team as a Ride Mechanic at Six Flags Fiesta Texas in San Antonio! This full-time role offers an hourly rate of $18 to $25 per hour or more based on experience, with great perks like Medical, Dental, Vision, 401k matching, and paid time off. Enjoy flexible scheduling, a minimum of 40 hours/week, plus extra pay: $1/hour after 5pm and $5/hour on weekends. We also offer a $500-$1000 annual tool reimbursement program, $200 annual boot reimbursement, FREE uniforms, Weekly Pay, nationwide FREE park access and parking for yourself and a guest, season passes for family, annual complimentary park tickets for friends and family, 40% off of food and merchandise, access to exclusive employee only events and more! Responsibilities: The Maintenance Department is currently looking for a qualified and motivated individual to join our team as a Ride Mechanic. In this role, you will be responsible for performing skilled technical services, including the inspection, maintenance, and repair of ride systems and equipment. You'll play a crucial part in ensuring the safety, functionality, and smooth operation of all rides, contributing to an exceptional guest experience. If you have a strong mechanical background and a passion for maintaining state-of-the-art amusement ride equipment, we want to hear from you! HOW YOU WILL DO IT: Get hands-on with equipment and ride structures, inspecting every nook and cranny Perform preventative maintenance, repairs, and overhauls to keep the fun rolling Tackle breakdowns like a pro, analyzing issues and taking action to fix them fast Work with hydraulics, gearboxes, pneumatics, and conveyors to keep everything running smoothly Use your skills to handle a variety of mechanical challenges and ensure the rides are always in tip-top shape! Qualifications: Knowledge of machinery components (automotive or industrial mechanic experience a plus!) A valid State Driver's License High school diploma or valid GED A personal toolbox with a solid set of hand tools Ability to work a variety of shifts, including weekends, nights, and holidays (overtime may be required) Willingness to perform physical activities, such as climbing, crawling, and lifting at various heights on ride structures Ability to climb up to 200ft Strong communication skills (reading, writing, and speaking) and ability to keep accurate written records Vocational or technical training in mechanical field a plus! Ready for the adventure? Apply today! OTHER NOTES: May perform other duties beyond scope of above as necessary to support the park as a whole Reports to Maintenance Leadership

Maintain, erect, repair, and troubleshoot rides and attractions, following Manufacturer and Engineering specifications to ensure their safe and efficient operation Responsibilities: A ride mechanic's work is the invisible foundation of an amusement park's success, making a difference in countless ways that guests rarely notice. By performing constant visual inspections, preventative maintenance, and complex overhauls, these skilled technicians are the ultimate guardians of safety. Qualifications: Must have 1-2 years of related experience and be able to work well in team environment. Must have tools and equipment to perform required duties and skills as defined above. Possess skills and proficient knowledge in one or more trades, from the following: mechanical, electrical, hydraulics, pneumatics, automotive, and/or welding/fabricate on and small engine repair. Will be required to work various shifts as project and park needs dictate, including nights, weekends, and holidays. Ability to troubleshoot clearly, calmly and safely in the presence of guests, co-workers, and park management in a fast-paced environment. Valid driver's license and be able to operate vehicles (including but not limited to forklifts, golf carts, cars, trucks).

What's In It for You? Full-Time, Hourly overtime eligible position and you get paid weekly! is covered by a Collective Bargaining Agreement Benefit options include, but are not limited to: Medical, Dental, Vision, Accident Insurance, and Group Auto and Home Retirement Benefits Include: 401k, Stock Purchase Program, and Stock Options Company Paid Life Insurance and AD&D is covered at 100% Exclusive employee perks including a pass to all Six Flags Parks, employee parties/events, and regional attraction admission Job Summary: Are you ready to take your career to new heights? 200ft to be exact! Join our team as a Ride Mechanic and work where you have fun! Ride mechanics get first-hand access to the rides that established us as the Thrill Capital of the South! You'll get to safely service, troubleshoot inspect, install, and rehab Ride machinery and components. Apply today! Full Time Hourly, Non-Exempt. This position is covered by a Collective Bargaining Agreement. Status: Fulltime Hourly, Non-Exempt. This position is covered by a Collective Bargaining Agreement. Pay Range: $28.97-$38.62 per hour (depending on level of experience). Work in excess of 40 hours per week is paid at 1.5x standard pay rate. Responsibilities: Essential Duties and Responsibilities: Inspect rides and attractions, and notifying management of any and all hazards that may endanger guests or employees Perform the ride inspection and maintenance programs in accordance with the standards set by Six Flags, Ride Manufacturers, ASTM and the State of Georgia. Maintain, erect, repair and troubleshoot various theme park rides and attractions Diagnose malfunctioning apparatus such as hydraulic systems, pneumatic systems, gearbox drive systems etc. Diagnose and repair/replace faulty mechanical components, such as lift chains, gear boxes, speed braking components, etc. Visually inspect and listen to machines and equipment to locate causes of malfunctions Remove and /or replace worn or defective parts using hand or power tools Weld using process types such as shielded meta ARC welding, Flux Core ARC welding and Gas ARC welding Read and interpret mechanical drawings and manufactures manuals and schematics as provided Keep a daily duty log of maintenance work performed as well as accurate records of preventative maintenance Respond to work orders and conduct mechanical repairs as required to maintain safe park operation. Adhere to park policies and procedures. Other duties as assigned Qualifications: Skills and Qualifications: Strong knowledge of various mechanical systems and ability to proficiently weld. Ability to meet deadlines Ability to professionally interact with other shops and various departments. Must be able to troubleshoot clearly, calmly and safely in the presence of guests, co-workers and park management. Ability to write, speak and comprehend English. Able to meet the physical demands of the job including lifting up to 100 lbs, bending, standing for long periods of time, climbing, and working at heights up to 200 ft. Knowledge of OSHA rules and regulations. Ability to work outside in any weather conditions, nights, weekends and holidays. Valid Drivers' License and clean DMV report. Employees are required to supply their own hand tools.

Full-time union position will inspect, maintain, troubleshoot, repair and refurbish amusement rides and their subsystems. The individual will ensure all rides and equipment comply with all operating standards and requirements. Responsibilities: Perform visual inspections of assigned rides and attractions Maintain, erect, repair and trouble-shoot various theme park rides and attractions Visually inspect machines and equipment Remove and or replace equipment parts using hand and or power tools perform routine preventative maintenance on various equipment including rides and attractions Keep a daily log of maintenance work performed as well as accurate records of preventative maintenance Assist with other duties/departments as assigned Adhere to all department and company safety policies; wear appropriate safety equipment as required Support the company Mantra of providing Friendly, Clean, Fast and Safe Service to our Guests Qualifications: High School diploma or equivalent Pneumatics troubleshooting and repairs working with schematic Mechanical repairs following ASTM ride standards Welding 6G certified Machining experience working from drawings using lathe and milling machine Must be able to trouble-shoot safety and emergency equipment, including respirators and safety harnesses Must have hand tools to perform required duties and tasks as assigned

C3 Mechanic Full-Time Compensation: $28.22 up to $34.23 based on experience Now Hiring! Coach USA is looking for Maintenance Mechanics of all levels to join our Chester, NY location. Under the supervision of the Maintenance Manager a Maintenance Mechanic performs highly skilled preventative maintenance, and diagnostic and repair work on motor coaches to minimize downtime and ensure a positive customer experience. What we offer: Paid weekly/Direct deposit Medical, Dental, Vision Flexible Spending Account ($3,300) Dependent Care Spending Account (Daycare $5000) Company-sponsored Life insurance ($100k) 401k Retirement Plan with Company match Vacation 10 Paid Holidays 7 PTO Floating Holidays Birthday Tool/Boot Allowance annually Employee Discounts through LifeMart and Tickets at Work (Travel, Hotels, Car Rentals, Theme Parks, Electronics, Childcare and more ) Save up to 15% on Verizon Wireless Bill with Employee Discount Samsung save@work HUSK Marketplace (discounts on Fitness, Nutrition, Mental Health, and more) Perfect Attendance $100 (every 6 months) Union Shop Garage Kept buses Responsibilities: Inspect, diagnosis and replace components on Motor Coaches as needed Minor body work as needed PMI repairs Utilize most specialized purpose shop tools, such as steam cleaners, grease guns, as needed Performs other duties Qualifications: High Schools Diploma Able to work in all types of weather conditions, including outdoors Must meet DOT Physical Qualifications, pass pre-employment drug screen/background check CDL A/B with Passenger and Air Brake Endorsements Must be able to attend training when directed Coach USA would love to discuss your qualifications for this position. To learn more about your next big career change! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. "lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"

C3 MechanicFull-TimeLocation: Chester, NYCompensation: $28.22 up to $34.23 based on experience Now Hiring! Coach USA is looking for Maintenance Mechanics of all levels to join our Chester, NY location. Under the supervision of the Maintenance Manager a Maintenance Mechanic performs highly skilled preventative maintenance, and diagnostic and repair work on motor coaches to minimize downtime and ensure a positive customer experience. What we offer: Paid weekly/Direct deposit Medical, Dental, Vision Flexible Spending Account ($3,300) Dependent Care Spending Account (Daycare $5000) Company-sponsored Life insurance ($100k) 401k Retirement Plan with Company match Vacation 10 Paid Holidays 7 PTO Floating Holidays Birthday Tool/Boot Allowance annually Employee Discounts through LifeMart and Tickets at Work (Travel, Hotels, Car Rentals, Theme Parks, Electronics, Childcare and more ) Save up to 15% on Verizon Wireless Bill with Employee Discount Samsung HUSK Marketplace (discounts on Fitness, Nutrition, Mental Health, and more) Perfect Attendance $100 (every 6 months) Union Shop Garage Kept buses Responsibilities: Inspect, diagnosis and replace components on Motor Coaches as needed Minor body work as needed PMI repairs Utilize most specialized purpose shop tools, such as steam cleaners, grease guns, as needed Performs other duties Qualifications: High Schools Diploma Able to work in all types of weather conditions, including outdoors Must meet DOT Physical Qualifications, pass pre-employment drug screen/background check CDL A/B with Passenger and Air Brake Endorsements Must be able to attend training when directed Coach USA would love to discuss your qualifications for this position. To learn more about your next big career change! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. "lube

Maintain, erect, repair, and troubleshoot rides and attractions, following Manufacturer and Engineering specifications to ensure their safe and efficient operation Responsibilities: A ride mechanic's work is the invisible foundation of an amusement park's success, making a difference in countless ways that guests rarely notice. By performing constant visual inspections, preventative maintenance, and complex overhauls, these skilled technicians are the ultimate guardians of safety. Qualifications: Must have 1-2 years of related experience and be able to work well in team environment. Must have tools and equipment to perform required duties and skills as defined above. Possess skills and proficient knowledge in one or more trades, from the following: mechanical, electrical, hydraulics, pneumatics, automotive, and/or welding/fabricate on and small engine repair. Will be required to work various shifts as project and park needs dictate, including nights, weekends, and holidays. Ability to troubleshoot clearly, calmly and safely in the presence of guests, co-workers, and park management in a fast-paced environment. Valid driver's license and be able to operate vehicles (including but not limited to forklifts, golf carts, cars, trucks).

We are seeking a skilled and safety-conscious Amusement Ride Mechanic to join our team. In this full-time role, you will be responsible for the inspection, maintenance, repair, and troubleshooting of amusement rides and related equipment to ensure optimal performance and guest safety. This is a full-time position offering a comprehensive benefits package, including medical, dental, vision, and a 401(k) match. Responsibilities: * Conduct routine inspections (daily, weekly, monthly, annual, and as required) of rides and equipment, using both visual and auditory assessments to identify issues and perform corrective actions promptly. * Perform scheduled and unscheduled preventative maintenance , including inspection, repair, and testing of ride components. This may involve servicing or replacing parts such as hydraulic and pneumatic cylinders, gears, chains, sprockets, hoses, brakes, clutches, wheels, bearings, gearboxes, springs, and other mechanical systems. * Troubleshoot and resolve issues involving mechanical, pneumatic, hydraulic, and electrical systems to minimize downtime and ensure guest safety. * Follow established repair procedures and maintain detailed records of inspections, maintenance activities, and repairs. Submit all required documentation to management in a timely and organized manner. * Communicate ride status updates clearly and effectively, both verbally and through written reports. * Ensure all equipment is maintained in a safe and operational condition , in compliance with applicable codes, laws, company policies, and industry best practices. * Perform advanced tasks based on experience, such as welding (MIG, TIG, and Arc), metal fabrication, and operating machinery including lathes, mills, drill presses, grinders, and other metalworking tools. * Read and interpret technical documentation , including manufacturer manuals, service guides, and mechanical, pneumatic, and hydraulic blueprints, to support accurate repairs and component replacements. * Support other maintenance activities and projects as assigned by leadership. Qualifications: * High school diploma, GED, or equivalent required. * Valid state driver's license. * 2-4 years of verifiable experience in mechanical maintenance, preferably in an industrial or amusement park setting. * Solid understanding of basic mechanical principles, including gear ratios, torque, proper use of hand tools, and mechanical terminology. * Familiarity with power transmission components such as bearings, bushings, couplers, and shafting. * Demonstrated knowledge of pneumatic and/or hydraulic systems; proficiency in both is preferred. * Ability to work collaboratively in a fast-paced, high-pressure environment. * Comfortable working at heights up to 300 feet on ladders, platforms, or other elevated structures. * Flexibility to work nights, weekends, and holidays as required by operational needs. #LI-RN1

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Airframes) Task Description: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural and related sub-systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic II shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: * Familiar with duties assigned to personnel within all work centers. * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Scheduled and unscheduled maintenance. * Maintenance Control planning and management. * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Support Equipment (SE operation and inspections. * Corrosion Control/Aircraft Painting. * Troubleshooting * Preservation/de-preservation. * General Aircraft Maintenance. * Ordnance handling, limited to unjamming related equipment/ALSS maintenance. * Technical Directive compliance and modifications. * Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. * Maintain Aircraft, Engines, and SE Logbooks. * Aviation Life Support System (ALSS) Maintenance. * Central Technical Publications Library Programs Management * Dispersed Technical Publications Librarian * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. PREFERRED QUALIFICATIONS: * Ten or more years' experience with NALCOMIS/OOMA * Ten years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Familiarity and ability to use military tech manuals. * Advanced Corrosion Control Course * Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: * Individual (I) Aircraft Maintenance Qualification * Airframes "C" school or USMC/USCG equivalent * New hire personnel should have five years' aviation maintenance experience on applicable T/M/S aircraft * Preferred to have 2 years T/M required/Series preferred Intermediate experience within last 3 years * Five years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Must have valid driver's license * Must be able to work 1st, 2nd, 3rd and weekend shift schedule as required. * Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. * Must be able to pass a background check. * Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance". * Must be able to climb ladders, raised platforms, and aircraft. * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $50.91/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic I (Airframes) Task Description: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti- icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Airframe/Structural and related sub-systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic I shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: * Familiar with duties assigned to personnel within all work centers. * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Scheduled and unscheduled maintenance. * Maintenance Control planning and management. * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Support Equipment (SE operation and inspections. * Corrosion Control/Aircraft Painting. * Troubleshooting * Preservation/de-preservation. * General Aircraft Maintenance. * Ordnance handling, limited to unjamming related equipment/ALSS maintenance. * Technical Directive compliance and modifications. * Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. * Maintain Aircraft, Engines, and SE Logbooks. * Aviation Life Support System (ALSS) Maintenance. * Central Technical Publications Library Programs Management * Dispersed Technical Publications Librarian * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. PREFERRED QUALIFICATIONS: * Ten or more years' experience with NALCOMIS/OOMA * Ten years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Familiarity and ability to use military tech manuals. * Advanced Corrosion Control Course * Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: * Individual (I) Aircraft Maintenance Qualification * Airframes "C" school or USMC/USCG equivalent * New hire personnel should have five years' aviation maintenance experience on applicable T/M/S aircraft * Preferred to have 1 year T/M required/Series preferred Intermediate experience within last 3 years * Three years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Must have valid driver's license * Must be able to work 1st, 2nd, 3rd and weekend shift schedule as required. * Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. * Must be able to pass a background check. * Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance". * Must be able to climb ladders, raised platforms, and aircraft. * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $48.49/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic III (Calibration) Task Description: Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Metrology and Calibration (METCAL) * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic III shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: * Familiar with duties assigned to personnel within all work centers. * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Scheduled and unscheduled maintenance. * Maintenance Control planning and management. * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Support Equipment (SE operation and inspections. * Corrosion Control/Aircraft Painting. * Troubleshooting * Preservation/de-preservation. * General Aircraft Maintenance. * Ordnance handling, limited to unjamming related equipment/ALSS maintenance. * Technical Directive compliance and modifications. * Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. * Maintain Aircraft, Engines, and SE Logbooks. * Aviation Life Support System (ALSS) Maintenance. * Central Technical Publications Library Programs Management * Dispersed Technical Publications Librarian * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. PREFERRED QUALIFICATIONS: * Ten or more years' experience with NALCOMIS/OOMA * Fifteen years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Familiarity and ability to use military tech manuals. * Advanced Corrosion Control Course * Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: * Individual (I) Aircraft Maintenance Qualification * New hire personnel should have ten years' aviation maintenance experience on applicable T/M/S aircraft * Six years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Must have valid driver's license * Must be eligible to qualify for and maintain SECRET level security clearance * Must be able to work 1st, 2nd, 3rd and weekend shift schedule as required. * Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. * Must be able to pass a background check. * Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance". * Must be able to climb ladders, raised platforms, and aircraft. * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $41.33/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Role and Responsibilities Responsible for the efficient operation and maintenance of all Utility equipment ensuring product quality, employee safety, and food safety standards, as well as regulatory requirements are met or exceeded. Areas of responsibilities include, but not limited to: Ammonia Compressors, refrigeration systems, boilers, wastewater, HVAC, Production and storage areas, Chillers, Kitchen Ventilation, Fire and Life Safety Systems. Effectively troubleshoots and promptly repairs the utility systems mentioned Supports adherence to the production schedule developed by the Master Scheduler ensuring the highest levels of customer service and production efficiency by ensuring effective and efficient equipment operation and limited downtime. Efficiently operate equipment in a safe manner in accordance with OEM guidelines. Completes schedule Preventative Maintenance Task as assigned. Maintains equipment records and inspections. Maintains neat and orderly personal appearance. Plans own work by organizing job site, specifying OEM parts, communicating plan to affected personnel, and staging appropriate tools. Maintain effective line of communication between maintenance and operations. Provide current and correct information to the operation's team on maintenance issues that relate to floor production. With QA, Safety, and others as appropriate, assists in execution of action plans related to health/safety to ensure the highest level of compliance. Assist in the completion of GSTD investigations Qualifications and Experience 2 to 5+ years of refrigeration and boiler experience; Food manufacturing experience preferred or equivalent combination of education and experience Have or ability to obtain refrigeration and boiler certification Preferred specialized advanced skills: Vibrational Analysis PLC/Control experience Able to work independently and jump in to resolve pressing maintenance requests that may impact the safety of others, and the operation of the plant as a whole Ability to obtain Full-face respirator certification (we will provide certification program) Proficient in - Microsoft Word and Excel, CMMS, Control System Able to read electrical and mechanical plans Ability to obtain forklift/ scissor lift/ and boom lift certification Required attributes Self-starter able to conceptualize and drive initiatives forward Positive attitude and motivated by contributing to the overall success of the team Able to develop strong relationships with internal and external stakeholders Creative problem-solving skills Obsessive attention to detail, well organized and able to juggle many projects at once Comfortable moving at a fast pace and in ambiguous environments Passionate about food Willing to address difficult situations head on with patience and respect As A Leader Within the Kettle Cuisine Team You Are Expected To: Model and support Kettle's Core Values and safety culture Create a culture of accountability & performance Drive a focus on quality and continuous improvement Plan work, track results and resolve variances LEVEL OF RESPONSIBILITY Works with little supervision, but work is reviewed. Exercises discretion within areas of responsibility. Recommends actions and alternatives to supervisor and others. Position has little to no contact with customers. Position makes indirect contribution to efforts that generate moderate levels of revenue. Decisions or actions may have a moderate impact on other departments and/or external relationships of the organization. Errors or delays may result in immediate interruption of work output. WORKING CONDITIONS AND PHYSICAL EFFORT The work environment characteristics described here are representative of those a mechanic encounters while performing the essential functions of this job. Physical Demands/Efforts Extensive walking and standing Vision/hearing Talking Repetitive motion (hands/wrists) Climb and balance Must be willing to work weekends and some holidays Work requires occasional physical exertion, including some lifting of objects weighing up to 50 pounds. Mental & Visual Demands Work performed by this position requires moderate concentration to effectively execute moderately complex tasks. Work occasionally requires some degree of visual effort for periods of time. Work Environment and Hazards Employee works in a manufacturing setting with some exposure to heat, cold, dust, or other factors of minor inconvenience. Need to work weekends and overtime as required.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (Avionics) Task Description: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Responsibility: To perform Intermediate level maintenance and modifications on SE, IMRL and aircraft components in the physical custody of Fleet Readiness Center West Detachment China Lake, in support of VX-9 and VX-31 and outlying areas covered under the IMRL program. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Intermediate Level maintenance and possess one or more of the specialties of the assigned aircraft below: Avionics/Electrical Systems and related sub-systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic II shall have experience writing with clarity and technical accuracy and exhibit effective leadership qualities and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems TASK REQUIREMENTS: * Familiar with duties assigned to personnel within all work centers. * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Scheduled and unscheduled maintenance. * Maintenance Control planning and management. * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Support Equipment (SE operation and inspections. * Corrosion Control/Aircraft Painting. * Troubleshooting * Preservation/de-preservation. * General Aircraft Maintenance. * Ordnance handling, limited to unjamming related equipment/ALSS maintenance. * Technical Directive compliance and modifications. * Individual Material Readiness List (IMRL), and Metrology and Calibration (METCAL) Program Management. * Maintain Aircraft, Engines, and SE Logbooks. * Aviation Life Support System (ALSS) Maintenance. * Central Technical Publications Library Programs Management * Dispersed Technical Publications Librarian * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. PREFERRED QUALIFICATIONS: * Ten or more years' experience with NALCOMIS/OOMA * Ten years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Familiarity and ability to use military tech manuals. * Advanced Corrosion Control Course * Attended Quality Assurance Admin course or Equivalent. BASIC QUALIFICATIONS: * Individual (I) Aircraft Maintenance Qualification * New hire personnel should have five years' aviation maintenance experience on applicable T/M/S aircraft * Five years extensive knowledge of Naval Aviation Maintenance Program (NAMP). * Must have valid driver's license * Must be eligible to qualify for and maintain SECRET level security clearance * Must be able to work 1st, 2nd, 3rd and weekend shift schedule as required. * Must be able work flexible work-week schedules i.e. Mon-Fri, Sun-Thur, Fri-Mon or as required. * Must be able to pass a background check. * Must satisfactorily complete the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance". * Must be able to climb ladders, raised platforms, and aircraft. * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $39.58/hour Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 6.16 hours of PTO per pay period. KAI employees at China Lake FRCW have a minimum of 12 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Essential Duties And Responsibilities Other duties may be assigned. Perform all necessary aircraft inspections including, but not limited to: Annual; 100- hour; 50- hour; oil changes. Maintaining aircraft maintenance records per the Code of Federal Regulations for each aircraft. Ensuring all aircraft are airworthy and safe for flight after inspections/repairs. Handling all aircraft line squawks promptly. Be reachable by Supervisor or CBU staff should maintenance need arise. If a maintenance need arises, fly to a specific location to assist a student or flight instructor. Maintain a supply stock of parts as needed for the aircraft. Maintain A&P and IA FAA currency requirements. Make timely reports to the Director of Maintenance on aircraft status. Have maintenance records readily available upon FAA request.

Task Description: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational and/or Depot Level maintenance and possess one or more of the specialties of the assigned aircraft below: Power Plants and related Sub-Systems, Fuel and Air Systems, Rotor Systems, and related Sub-systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic II shall have experience writing with clarity and technical accuracy and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: * Occasionally leads teams * Familiar with duties assigned to personnel within all work centers. * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Assists in coordinating aircraft moves and static display requirements. * Performs all other required duties as applicable and assigned by supervision. * Performs aircraft organizational level maintenance functions on MV-22 aircraft. * Scheduled and unscheduled maintenance support for assigned MV-22 aircraft * Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation * Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating systems. * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. * Inspect, repair, replace, and rebuild aircraft components/subcomponents to include rigging of flight control. * Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Confined space operations to include fuel cell entry * Support Equipment (SE) operation and inspections * General aircraft maintenance * Requisition repair parts, materials, and consumable supplies through military supply system. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. Preferred Qualifications: * Seven or more years rotary wing maintenance experience * Naval Aviation Maintenance Control Management course (C-555-0053) * Collateral Duty Quality Assurance Representative (CDQAR) for Airframes, Power Plants and Electrical Systems * Basic Corrosion Control * Previously certified Tire and Wheel * Previously certified Hydraulic Contamination * Previously certified MV-22 Plane Captain Basic Qualifications: * Two or more years' MV-22B O-Level and/or D-Level maintenance experience * Shall be able to obtain Collateral Duty Inspector (CDI) qualification within 90 days of employment * Must be able to work shift maintenance as required. * Must be able work flexible work-week schedules as required. * Must be able to climb ladders, raised platforms, and work on top of and below aircraft * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. * Must satisfactorily complete a National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check with written Inquiries (ANACI) * Must be eligible for Common Access Card (CAC). Compensation $45.29/hour Other Compensation Employees receive a minimum health and welfare benefit of $7.20 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 5.52 hours of PTO per pay period. KAI employees at VRM-50 have 13 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Job Title: Aircraft Mechanic II (Flight Line) Task Description: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Mechanical Flight Control Systems, Powerplant and related Sub-systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic II shall have experience writing with clarity and technical accuracy, and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: * Performs aircraft maintenance functions of the Line, Corrosion Control, and Aircraft Organizational Level maintenance * Scheduled and unscheduled maintenance support for assigned H-1 aircraft * Performs aircraft Daily Turn Around Inspections * Performs aircraft launch and recovery operations * Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/depreservation * Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Troubleshoot malfunctions in flight surfaces and controls, dynamic components, and powerplant systems. * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO). * Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. * Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Confined space operations to include fuel cell entry * Support Equipment (SE) operation and inspections * General aircraft maintenance * Requisition repair parts, materials, and consumable supplies through military supply system. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. Preferred Qualifications: * Five or more years' H-1 rotary wing experience * Seven or more years' rotary wing maintenance experience * Familiarity and ability to use NAVAIR IETMS. * Four or more years' experience with NALCOMIS/OOMA * Basic Corrosion Control Course * Advanced Corrosion Control Course/Paint and Final Finish * Automated Track and Balancing System (ATABS) Course (NATEC provides) * Aircraft Jacking Qualification * Previously certified H-1 CDI/CDQAR Basic Qualifications: * Four or more years' H-1 rotary aircraft maintenance experience * Must be able to work shift schedules as required per Performance Work Statement (PWS) * Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS * Must be able to pass a background check * Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 "Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position * Must be able to climb ladders, raised platforms, and aircraft * Must be able to use hand and power tools * Must have dexterity to handle small parts * Must be able to pass employment physicals * Must be able to deploy to support off station exercises and perform other support duties if required Compensation $43.57/hour Other Compensation Employees receive a health and welfare benefit of $6.25 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 5.52 hours of PTO per pay period. KAI employees at HMLAT 303 have 14 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Task Description: Aircraft Mechanic I (23021): (Flightline) Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Blade/Pylon Fold, Power Plants and related Sub-Systems, Fuel and Air Systems, Rotor Systems, and related Sub-systems * Must be knowledgeable of technical directives, NAMP programs, and shall be knowledgeable of and understand basic supply procedures. * Aircraft Mechanic I shall have experience writing with clarity and technical accuracy, and ensure adherence to all applicable policies and procedures. * Possess a high degree of expertise in the control and coordination of aircraft maintenance. * Thorough working knowledge of applicable maintenance/technical manuals and publications. * Thorough working knowledge of aircraft maintenance records. * Working understanding of the aircraft and aircraft systems. Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: * Process Visual Information Display System/Maintenance Action Forms (VIDS/MAF) from aircrew or maintenance technicians in accordance with OPNAVINST 4790.2 Series, Navy, and Company Instructions. * Performs all other required duties as applicable and assigned by supervision. * Performs aircraft organizational level maintenance functions on H-1 aircraft. * Scheduled and unscheduled maintenance support for assigned H-1 aircraft * Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/de-preservation * Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule * Aircraft maintenance action documentation via logs, records, forms, and electronic means * Troubleshoot malfunctions in aircraft structure, landing gear, pneumatic, hydraulic, ventilation and heating, flight surfaces and controls, dynamic components, and powerplant systems. * Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment. * Inspect, repair, replace, and rebuild aircraft components/sub components to include rigging of flight control. * Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Confined space operations to include fuel cell entry * Support Equipment (SE) operation and inspections * General aircraft maintenance * Requisition repair parts, materials, and consumable supplies through military supply system. * Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment * Perform shift work and/or overtime as required * Perform other tasks as directed. Preferred Qualifications: * Five or more years rotary wing maintenance experience * Previously certified Collateral Duty Inspector (CDI) for Line and/or Power Plants * Completed NATEC Course Automated Track and Balancing System (ATABS) * Basic Corrosion Control * Previously certified Hydraulic Contamination * Previously certified H-1 Plane Captain Basic Qualifications: * Two or more years' rotary aircraft maintenance experience * Must achieve Collateral Duty Inspector (CDI) AH-1Z & UH-1Y designation for DOL Skill within 90 days of hire * Must be able to work shift maintenance as required. * Must be able work flexible work-week schedules as required. * Must be able to climb ladders, raised platforms, and work on top of and below aircraft * Must be able to use hand and power tools. * Must have dexterity to handle small parts. * Must be able to deploy to support off station exercises and perform other support duties as assigned. * Must satisfactorily complete a National Agency Check Local Records Check and Credit (NACLC) or Access National Agency Check. * Must be eligible for Common Access Card (CAC). Compensation $39.28/hour Other Compensation Employees receive a minimum health and welfare benefit of $2.65 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 5.52 hours of PTO per pay period. KAI employees at MAG-39 have 13 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Imagine a career at one of the nation's most advanced health networks. Be part of an exceptional health care experience. Join the inspired, passionate team at Lehigh Valley Health Network, a nationally recognized, forward-thinking organization offering plenty of opportunity to do great work. LVHN has been ranked among the "Best Hospitals" by U.S. News & World Report for 23 consecutive years. We're a Magnet(tm) Hospital, having been honored five times with the American Nurses Credentialing Center's prestigious distinction for nursing excellence and quality patient outcomes in our Lehigh Valley region. Finally, Lehigh Valley Hospital - Cedar Crest, Lehigh Valley Hospital - Muhlenberg, Lehigh Valley Hospital- Hazleton, and Lehigh Valley Hospital - Pocono each received an 'A' grade on the Hospital Safety Grade from The Leapfrog Group in 2020, the highest grade in patient safety. These recognitions highlight LVHN's commitment to teamwork, compassion, and technology with an unrelenting focus on delivering the best health care possible every day. Whether you're considering your next career move or your first, you should consider Lehigh Valley Health Network. Summary Maintain proper operation of all heating, ventilating, and air conditioning and refrigeration equipment and systems. Guide the capital replacement process to ensure up to date well-functioning HVAC equipment. Job Duties Adjust space temperatures to maintain proper environment. Assume the role of Indoor Air Quality Officer. Conduct HVAC flow and temperature analysis. Coordinate shutdown of essential systems with Facilities Director/Manager/affected departments. Drives, Combustion testing, Air balancing & distribution. Has a thorough Technical understanding and working knowledge of all the mechanical systems in the hospital, as well as its satellite buildings including, but not limited to, Air handling units, Electronic and pneumatic controls, Chillers, Boilers, Pumps, Heat exchangers, Exhaust systems, Refrigeration systems. Have technical understanding and the capabilities of executing the following analysis evaluation and recommendations with regards to the systems mentioned above, as well as, Thermodynamics (heat loads, transfer, and loss), and Fluid dynamics (air & liquid flow, pressure drops & resistance). Psychometrics, Variable Frequency. Investigate, evaluate, and conduct an engineering analysis of equipment or system problems and report findings and recommendations to the Facility Manager. Is responsible for cost-effective, efficient operation of all major HVAC systems without manufacturer support. Make necessary repairs and/or adjustments to all HVAC and refrigeration systems. Is responsible for Refrigeration Management Plan. Maintain and operate chiller plant in accordance with Director/Facility Manager directives. Perform all work in accordance with local, state, federal, JCAHO code compliance and complies with all hospital policies and procedures. Perform snow removal and fire and disaster duties as assigned. Perform preventive maintenance and adjustments to pneumatic control systems. Responsible for maintaining the preventative maintenance, repair, servicing, and installation of HVAC and refrigeration equipment, ventilation equipment, and other related equipment. Responsible for maintaining the preventive maintenance program for all air handling units, cleaning of all air handling units, and filter PM program. Plans and determines activities to accomplish assigned and repetitive jobs. Supervise and maintain daily operation of all heating ventilating and air conditioning and refrigeration systems. Supervise personnel in annual preventive maintenance of centrifugal and reciprocal chillers and the cooling towers. Will supervise/maintain the preventative maintenance, repair, servicing and installation of HVAC and refrigeration for satellite facilities. Work on new HVAC and refrigeration installations as directed. Minimum Qualifications High School Diploma/GED 2 years vocational training in heating, ventilating, and air Conditioning with HVAC EPA Certification type I, II, III and 10 years experience in industrial or institutional maintenance. Advanced HVAC knowledge must be able to trouble shoot & repair equipment with minimal support. Maintain good physical and emotional well-being and possess a strong sense of responsibility, initiative and loyalty. EPA Refrigeration Certification - State of Pennsylvania Upon Hire Preferred Qualifications Associate's Degree HVAC or Technical School Diploma or union apprenticeship in HVAC. Physical Demands Lift over 50 lbs. Push/pull up to 140 lbs. Carry 80 lbs. short distances. Frequent standing/walking, squatting, kneeling, crawling, climbing and reaching overhead. Job Description Disclaimer: This position description provides the major duties/responsibilities, requirements and working conditions for the position. It is intended to be an accurate reflection of the current position, however management reserves the right to revise or change as necessary to meet organizational needs. Other responsibilities may be assigned when circumstances require. Lehigh Valley Health Network is an equal opportunity employer. In accordance with, and where applicable, in addition to federal, state and local employment regulations, Lehigh Valley Health Network will provide employment opportunities to all persons without regard to race, color, religion, sex, age, national origin, sexual orientation, gender identity, disability or other such protected classes as may be defined by law. All personnel actions and programs will adhere to this policy. Personnel actions and programs include, but are not limited to recruitment, selection, hiring, transfers, promotions, terminations, compensation, benefits, educational programs and/or social activities. **************************** Lehigh Valley Health Network does not accept unsolicited agency resumes. Agencies should not forward resumes to our job aliases, our employees or any other organization location. Lehigh Valley Health Network is not responsible for any agency fees related to unsolicited resumes. Work Shift: Day Shift Address: 206 E Brown St Primary Location: Lehigh Valley Hospital- Pocono Position Type: Onsite Union: LVH-P SEIU Work Schedule: Monday-Friday 7:00a-3:30p Department: 1029-00071 Plant