Quality Control Inspector jobs at Kelly Services

We're hiring for a Quality Technician role onsite in Rochester, New York. In collaboration with process engineering, system design engineering and business development, the QC Technician (QCT) is involved in the inspection of customer samples, prototypes, and products for printed electronics applications. This is a position requiring flexibility, versatility, technical aptitude and attention to detail. Our Printed Electronics organization uses production-scale assets and processes for both development and production work. Processes include flexographic printing, electroless plating, end-of-line testing and packaging. The QCT will be cross trained on all inspection equipment and is expected to develop sufficient mastery for independent work in all aspects of the quality assurance process flow. Up to 25% of time is spent in either a Class 6 or 7 clean room, with the remaining time spent in a QC lab or office environment. Responsibilities: • Interpret instructions and execute work orders utilizing inspection equipment. • Collaborate with peers and team leaders to accomplish major objectives for the day while balancing workload, rotating job assignments, and completing routine tasks that are documented but not otherwise specified by supervision. • Inspection and quality assessment of incoming materials, WIP and product. • Identify problem conditions (Product, Process and/or general) and escalate to the appropriate supervision. • Perform routine cleaning and minor maintenance of inspection assets. • As needed, write and maintain standard operating procedures either independently or in collaboration with process engineering. • Routinely learn new tasks and adapt to new processes. • Comply with ISO 9001 and IATF 16949 Quality Management System requirements. • Sample management, Deviation Report (DR) reporting, Microscopy and Visual Inspection. • Backup and support for other QC roles within the organization, including chemical handling and analysis. Required Skills: • Operate measurement equipment in Class 6 & 7 cleanrooms with full head-to-toe gowning and adherence to clean room protocols. • Ability to visually inspect and detect defects in production and incoming materials. • Proficient in basic math functions and computer skills, including navigating screens, data entry, and email. • Work effectively with minimal supervision. • Ability to prioritize work to meet business needs. • Express oneself and communicate clearly, both written and verbal, and comprehend a variety of work requests. • Maintain a clean work area. • Maintain strict adherence to safety procedures and quality standards. • Dependable, maintain good attendance. Desired Skills: • Experience working in a clean room environment. • Experience in quality control role supporting production; including inspections and certification of incoming materials, WIP, product and post-production audit sampling. • Familiarity with FMEA (Failure Mode Effects Analysis) processes. • Experience with microscopy. • Experience with chemical handling. • Flexographic printing experience. • Internal Audit experience to ISO 9001. • Familiar with Statistical Process Control (SPC) . • Ability to read drawings including GD&T (Geometric Dimensioning & Tolerancing.

Quality Control Inspector Needed in Camarillo Direct Hire Industry: BioTech, Pharmaceuticals Pay range: $23 - $24/hour Monday - Friday 7am - 3:30pm Must Have * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Job Summary Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Essential Functions * Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; * Conduct inspection and testing related to: ► Incoming product. ► First article. ► In-process. ► Final. * Initiate nonconformance reports (NCR). * Performs all aspects of testing related to manufacturing. o Incoming inspections o In-process inspection. o Final Inspection release of finished goods. o Document review. o Supports cross functional departments investigate potential non-conformance's observed * Ensures that all inspections and procedures are properly completed and documented. * Perform pre and post-inspection of product gamma irradiation process. * Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. * Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations * Prepare and submit Metrics reports to the quality supervisor or QC lead * Comply with all safety requirements ensuring work areas meet standards. * May be required to report to multiple facilities within a 2-mile radius. * Job Order document review and release * Other duties as assigned Education * High School Diploma or equivalent with 2 years of experience in quality control inspections. Required Experience & Competencies * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. * Solid organizational and planning skills required. * Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. * Must be able to work effectively and efficiently in a team environment. * Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. * Must display personal accountability for results and integrity. * Must display eagerness to learn and continuously improve. * Must have uncompromising dedication to quality. * Good general mathematical skills. * General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges * General computer skills. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Lead Quality Assurance Inspector - $23-$28/hr DOE! is a direct hire opportunity! Integrity Trade Services is hiring a Lead Quality Assurance Inspector for our machining client to start immediately at $23-$28/hr DOE! Receive comprehensive benefits through our client upon hire! Responsibilities: Ensure FAI, in process, and final inspections meet internal and external specs. Work closely with production and engineering teams to resolve quality issues quickly and effectively. Document nonconformities and support root cause analysis and corrective actions. Help prepare for and participate in audits-including calibration (internal, customer, third party). Lead daily inspection activities on the production floor; coordinate a team of inspectors. Help maintain inspection procedures, calibration procedures, checklists, and work instructions. Train and mentor QC and production to uphold quality standards and best practices. Location: Bridgeview, IL Schedule/Shift Details: 2nd shift (4:30PM-3AM) Monday-Thursday with some Saturdays, as needed! TRAIN ON FIRST SHIFT 6:00 am to 4:30 pm Qualifications: 3+ years in manufacturing quality inspection, with at least 1 year in a lead or supervisory role. Strong understanding of quality control processes and inspection techniques Proficiency in using precision measuring tools (calipers, micrometer, height gauges, etc.). Working knowledge of blueprints and engineering drawings. Hands-on experience with First Article Inspection (FAI), non-conformance reports (NCRs), and corrective action (CAPA) processes. Industry-specific experience (e.g., aerospace, automotive, medical devices). Why choose Integrity Trade Services? At ITS, we offer our employees a competitive salary paid weekly and a comprehensive benefits package, including medical, dental, and vision insurance. Medical, Dental, Vision Insurance after 90 days of employment. Long term disability after 90 days 401k Eligibility after 1 year Employee Assistance Program Gainsharing Program after 90 days 1 week paid vacation in the first year Safety Shoes, Prescription Safety Glasses stipend after 1 year

The main function of a Quality Assurance Inspector is to ensure that products, materials, and processes meet established quality standards and regulatory requirements. A typical Quality Assurance Inspector performs batch record reviews, and collaborates with production teams to maintain consistent product quality. Job Responsibilities: Conduct batch record review, document review and perform QA on the floor responsibilities. Collaborate with production and engineering teams to resolve quality issues. Ensure compliance with internal procedures and external standards (e.g., ISO, FDA). Participate in audits and support continuous improvement initiatives Skills: Strong attention to detail and analytical thinking. Knowledge of quality assurance methodologies and regulatory standards Effective communication and documentation skills. Ability to interpret technical drawings and specifications. Familiarity with quality management systems and software. Ability to gown in and out of manufacturing suites is required. Education/Experience: Bachelor's degree in a scientific field preferred 0-2 years of experience in quality assurance or inspection roles

Our client is a global leader in e-commerce and cloud technology, recognized for innovation, customer obsession, and large-scale operational excellence. Based out of Westborough Massachusetts they are looking to hire a Quality Assurance Tech 1 on a Contract basis. Contract Duration: 6 Month Contract (Potential for extension) Required Skills & Experience Read and understand electrical schematics Ability to fabricate fixturing and perform board re-works, based on schematics Board-level soldering experience Experience with cable assembly and bring up AS or BS in Electrical Engineering or equivalent industry experience experience testing hardware Experience using standard electrical test/laboratory equipment Oscilloscopes Data acquisition devices Digital multi-meters Signal generators Understand and execute documented test procedures collect test data, document test artifacts and conditions Troubleshoot electronic devices under test Clear written and verbal communication for Test Engineers and external stakeholders Proficiency working in a Linux/Unix environment, and executing simple scripts is a plus Daily Responsibilities Working with other Test Engineers, Hardware and Software developers regarding tools and techniques required for testing. Maintain fixture uptime of existing fixtures Troubleshoot electrical and control issues Develop test subsystems and documentation Execute tests and acquire test data You will receive the following benefits: Medical Insurance - Four medical plans to choose from for you and your family Dental & Orthodontia Benefits Vision Benefits Health Savings Account (HSA) Health and Dependent Care Flexible Spending Accounts Voluntary Life Insurance, Long-Term & Short-Term Disability Insurance Hospital Indemnity Insurance 401(k) including match with pre and post-tax options Paid Sick Time Leave Legal and Identity Protection Plans Pre-tax Commuter Benefit 529 College Saver Plan Motion Recruitment Partners (MRP) is an Equal Opportunity Employer. All applicants must be currently authorized to work on a full-time basis in the country for which they are applying, and no sponsorship is currently available. Employment is subject to the successful completion of a pre-employment screening. Accommodation will be provided in all parts of the hiring process as required under MRP's Employment Accommodation policy. Applicants need to make their needs known in advance.

Quality Control Inspector Duration: 6 month contract to permanent Pay Range: $20.00 - $22.00 Hours: 1:00pm to 9:00pm Plans and directs activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products. Tests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. EDUCATION and/or EXPERIENCE: Associate degree in an aviation related field preferred At least 1-year relevant aviation work experience Minimum of 2 years' experience in basic dimensional/visual inspection required on aviation related equipment (airframe, powerplant, and or avionic) Certify visual acuity to NAS-410 Airframe and Powerplant FAA certifications preferred Responsibilities: Provide quality control final inspection support, and shipping / receiving inspection support. Accurately interpret engineering drawings, customer specifications, company specifications, sampling procedures, designs, forms, and instructions for recording, evaluating, and reporting quality and reliability data. Utilize precision tools and equipment with accuracy for testing and measurement of products Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Benefits (employee contribution): Health insurance Health savings account Dental insurance Vision insurance Flexible spending accounts Life insurance Retirement plan All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Rate of pay within the stated range will depend on the qualification of the applicant.

. Length of Assignment: 11 months with possibility of extension. , Monday-Friday. Performs operations necessary for quality testing. Performs generally supervised, routine tasks, following SOPs, which may include environmental monitoring testing, water testing, simple routine testing of in-process and final products in accordance with GMP. Collect environmental monitoring samples (both viable and non-viable air and surface) in manufacturing aseptic processing areas. Must Have: Bachelor's degree or Associate's degree with applicable microbiological experience. Any type of microbiology experience (i.e. environmental monitoring testing, gram stain techniques, growing bacterial colonies on agar plates, agar plate reading, etc., etc.

Our client is hiring CWI QA/QC Inspectors and Supervisors in Reno/Sparks, NV area. These are Direct Hire positions offering a Full Benefits package and relocation assistance. Essential Duties & Responsibilities: Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of assigned product or component. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Reviews all purchased products or components and provides input to the decision of whether to accept the product and future purchases from the vendor. Documents data obtained during all quality assurance activities, consistent with company policies and procedures. Communicates significant issues or developments identified during quality assurance activities and provides recommended process improvements to management. Prepares reports to communicate involvement and results of quality assurance activities. Other duties as assigned. Qualifications: Seeking at least 2 years of experience in Quality Control focused on ASME B31 piping codes, industrial and commercial construction, fabrication, welding, non-destructive testing, and/or other similar fields. Current certification in accordance with AWS QC-1 as a Certified Welding Inspector (CWI) preferred. Excellent time management and written and spoken communication skills, highly professional, organized, and trustworthy team player. Must be able to pass a background check and a drug test.

Our client, a global CDMO, offering products and services across the drug development spectrum is looking for a skilled QC Analyst III to join their team in Ventura County, CA! Job Title: QC Analyst III Job type: 6 month contract - hire Pay rate: $37 - $39/ hr. Job Summary: We are seeking a highly skilled and detail-oriented Senior QC Analyst to perform complex analytical testing in support of pharmaceutical product development and manufacturing. The ideal candidate will have advanced experience in chromatography techniques (e.g., HPLC, UPLC, GC), method validation, data analysis, and regulatory compliance. This position plays a critical role in ensuring product quality, supporting investigations, and driving continuous improvement across the QC function. Key Responsibilities: Perform complex analytical testing including Liquid Chromatography (HPLC/UPLC), Gas Chromatography (GC), and other instrumental and wet chemistry techniques. Troubleshoot analytical instruments and resolve method or equipment-related issues. Participate in and assist with test method validations, verifications, and transfers. Evaluate and analyze test data to identify trends, outliers, or potential issues. Support OOS (Out of Specification) and OOT (Out of Trend) investigations, including CAPA (Corrective and Preventive Action) documentation. Coordinate testing activities with external laboratories, including raw material and specialized testing. Execute, author, and review SOPs, test methods, protocols, reports, investigations, change controls, and data summaries. Utilize risk assessment and root cause analysis tools (e.g., 5 Whys, Fishbone) to support investigations and process improvements. Manage aspects of the stability program, including scheduling, testing, and reporting, and investigate aberrant stability results. Qualifications: Bachelor's or Master's degree in Chemistry, Biochemistry, Pharmaceutical Sciences, or a related scientific field. 3-6+ years of relevant experience in a regulated laboratory environment (pharmaceutical, biotech, or similar). Strong technical expertise in HPLC, UPLC, GC, and other analytical techniques. Working knowledge of cGMP regulations, ICH guidelines, and regulatory expectations. Experience with method validation and stability programs preferred. Ability to manage multiple tasks and work independently in a fast-paced environment. Experience with electronic data systems (e.g., Empower, LIMS, TrackWise, MasterControl). Note: This job description is a complete list of all desired skills, but not all are required. We strongly encourage candidates who have some of the skills to apply. We look forward to a conversation to learn more about you!

We are seeking a highly motivated Entry-Level Quality Control (QC) Analyst to join our Gene Therapy QC Bioassay group. This is an excellent opportunity for recent graduates or individuals early in their careers to gain hands-on experience in a dynamic and cutting-edge environment supporting AAV-based gene therapy programs. The QC Analyst will be trained to perform cell-based bioassays, ELISAs, and other biological methods in a GMP-regulated setting, while also supporting external laboratory testing. Responsibilities: Learn and perform immunoassays (e.g., ELISA) and cell-based assays under supervision in a GMP environment to support product release and stability testing. Assist in drafting and reviewing standard operating procedures (SOPs) and technical documents. Support method transfer, qualification of critical reagents, and other assay-related activities. Participate in the review and basic trending of QC data. Assist with routine laboratory upkeep, including cell culture maintenance, instrument calibration, and inventory tracking. Collaborate with internal teams and external partners as part of cross-functional project support. Contribute to investigations and deviation reports under guidance. Qualifications: Bachelor's degree in Cell Biology, Molecular Biology, Biochemistry, or a related scientific field. Academic or internship experience with mammalian cell culture and/or ELISAs strongly preferred. Familiarity with basic lab techniques and data analysis methods. Enthusiasm for learning and the ability to work both independently and within a team. Strong organizational, communication, and interpersonal skills. Detail-oriented and eager to develop problem-solving skills in a regulated lab environment.

Performs operations necessary for quality testing. Performs generally supervised, routine tasks, following SOPs, which may include: environmental monitoring testing, water testing, simple routine testing of in-process and final products in accordance with GMP. Collect environmental monitoring samples (both viable and non-viable air and surface) in manufacturing aseptic processing areas Environmental monitoring plate reads Conduct contaminant identification. Assist with protocol testing as needed Prepping and maintenance of supplies and environmental monitoring equipment. Utilize standard operating procedures to conduct environmental monitoring activities. Use data management systems to enter and track results. Demonstrate a visible & tangible commitment to HSE. In addition to the above, other assigned duties & projects deemed appropriate within the position scope. Able to operate assigned lab equipment. May order supplies needed in the labs. May assist in preparation of media, washing of glassware and operation of autoclave. Contacts are primarily with immediate supervisor and other experienced operators. Experience: 1 to 2 years Skills: Experience with enumeration of bacterial colonies on agar plates Experience with gram stain techniques Experience with aseptic techniques, clean room operations, or microbial control. Ability to meet standards for aseptic gowning qualification Demonstrated interpersonal skills including flexibility, collaboration and ability to work in a team environment. Computer literate with knowledge of Microsoft business office applications Experience with LIMS systems Education: Bachelor's Degree with a degree focused in Microbiology is preferred. Associate's degree or pursuing a relevant degree with applicable microbiological experience considered.

PPS is seeking an experienced and thorough CMM Inspector for our fabrication facility in Tempe. They will be tasked with operating and maintaining coordinate measuring machines (CMMs), as well as inspecting and ensuring the precision and accuracy of parts or products according to engineering drawings, specifications, or design standards. This is a full-time, permanent position with benefits and room for advancement! Responsibilities: Setting up and operating the coordinate measuring machines to measure parts and components accurately. This can include both manual and automated CMM systems. Inspecting parts to ensure they meet required specifications, measuring attributes like dimensions, angles, surface roughness, and positioning of holes or features. Reviewing measurement data to identify any discrepancies or defects to determine whether the part or component is within the allowable tolerances. Recording inspection results, documenting any deviations, and providing reports to engineers or managers. Ensuring that the CMM is properly calibrated and maintained for optimal performance, including regular checks, maintenance, and troubleshooting. Working to maintain high standards of quality assurance, ensuring that products meet industry standards and customer requirements Requirements: Strong understanding of geometric dimensioning and tolerancing (GD&T) Proficiency in CMM software, including Mitutoyo PC-DMIS Attention to detail and precision Problem-solving and analytical skills Strong written and verbal communication skills for reporting and team coordination Knowledge of precision measurement instruments Ability to lift up to 25 lbs without assistance up to 75 lbs with assistance, stand, kneel, walk, twist, crouch, stoop, bend, push, pull, and reach

Job Title: QC Analyst Schedule: Onsite | Sunday-Thursday | 11:00 PM - 7:30 AM The QC Analyst is an entry-level, hands-on laboratory position responsible for performing routine and critical analytical testing to support quality control operations. This role involves the generation, analysis, documentation, and communication of analytical data in compliance with regulatory requirements and standard operating procedures (SOPs). The position supports testing of raw materials, in-process samples, finished products, stability studies, and cleaning validation. This is a temporary-to-hire role with an anticipated conversion around six months. Key Responsibilities Perform accurate, efficient, and high-quality analytical testing in accordance with USP/NF/EP/JP/FCC standards or customer-supplied methods. Typical testing includes, but is not limited to: Dissolution, Titration, Polarimetry, Loss on Drying, Viscosity, Residue on Ignition, Heavy Metals, FTIR, HPLC, and GC. Maintain complete, accurate, and compliant written documentation of all analytical work performed. Interpret analytical data and clearly communicate results, deviations, and issues to appropriate personnel. Organize and schedule daily workload to ensure timely completion of testing. Calibrate, operate, and maintain laboratory instruments and equipment. Follow laboratory safety practices, chemical hygiene procedures, and all applicable regulations. Become proficient in all relevant SOPs and test methods. Work effectively in a “flow-to-the-work” team-based environment. Maintain a clean, organized, and safe laboratory workspace in collaboration with other team members. Perform peer reviews of analytical testing and documentation. Write or update SOPs as needed. Adapt to changing priorities and take on additional responsibilities to meet business and quality objectives. Education & Experience Requirements Bachelor's degree in Chemistry, Biology, Chemical Engineering, or Life Sciences with no prior QC experience OR Bachelor's degree in another discipline with relevant experience in a Quality Control laboratory. Required Skills & Qualifications Ability to multitask efficiently in a fast-paced laboratory environment. Strong attention to detail with the ability to deliver accurate results on the first attempt. Ability to work effectively under pressure and meet production deadlines. Effective verbal and written communication skills in English. General knowledge of laboratory equipment and analytical techniques. Basic understanding of laboratory safety and safe handling of chemicals. Proficient computer skills, including Microsoft Word and Excel. Ability to stand for extended periods while performing laboratory testing. Strong teamwork skills and the ability to collaborate across functional groups.

COMPANY INFORMATION: MatriScope Engineering Laboratories, Inc. (MatriScope) is a leader in providing professional services in the disciplines of Geotechnical and Environmental Engineering, Materials Testing, and Special Inspection Services. Over the past 20 years, MatriScope has built a strong reputation throughout Northern and Central California for providing exceptional service through a proactive project management approach, innovative practices and a commitment to maintaining its traditional values. MatriScope is headquartered in Sacramento, CA with additional offices in the Bay Area. MatriScope has many long-term assignments, including prevailing wage projects, for the right candidates who have a proven track-record, strong work-ethic, and desire to participate as a team player. MatriScope offers competitive salary and benefit package. POSITION OVERVIEW: Must be currently certified by the American Welding Society (AWS) as a Certified Welding Inspector (CWI). Previous inspection experience is required for this position. PRIMARY POSITION RESPONSIBILITIES: Perform as an entry to lead inspector on various projects responsible for the inspection and documentation of construction and the ability to properly interpret construction documents and prepare well-written and concise reports capturing all necessary elements is required. Must be able to properly follow directions, perform in a responsible manner with minimal oversight. Provide daily reports of observation and test results Monitor work procedures for compliance with project specifications Interact with client representative (supervisors, foremen, project managers, engineers, etc.) at project sites Perform analysis or calculations to check accuracy, applicability and reasonableness of testing data REQUIREMENTS: Entry or senior level Special Inspector with current certifications by the International Code Council, and American Welding Society. One (1) year of Special Inspector field experience. Ability to read and comprehend basic plans and specifications. Strong written and verbal communication skills and the ability to work with a team. Reliability - must be able to arrive at designated project sites prior to scheduled times Ability to prepare reports and documentation. Proficiency computer skills required. Ability and willingness to travel and work at construction sites. Ability to lift up to 50 pounds Ability to walk on uneven ground and work in variable outside conditions. Must be able to work various shifts depending upon construction schedules Must have a satisfactory driving record in accordance with the Company's driving (MVR) policy. Comply with the Company's auto insurance policy and must have a valid CA drive license. CERTIFICATIONS NEEDED: AWS Certified Welding Inspector (CWI)

Location: Rochester MA (100% On-site), 1st shift only 6:30A-3:30P M-F, salary range $72K-$82K, full-time role: health insurance with an HRA, dental, vision, LTD, and a 401(k) retirement plan with an employer match. 3 weeks PTO, 1 week sick. Generous relocation package offered. Qualified candidates are encouraged to apply. Large precast concrete supplier in Massachusetts and New Hampshire, providing high-quality products for over 70 years. Their extensive product range includes septic tanks, manholes, drainage structures, bulkheads, curbing, residential steps, and retaining wall systems, all crafted to precise specifications. They cater to engineers, contractors, and homeowners, emphasizing superior performance and exceptional customer service. The Quality Control Technician (“QC Technician”) will work within the production plant and is ultimately responsible for product testing. The QC Tech will assist in the execution of quality control processes, procedures and protocol associated with the production of pre and post concrete pours. Responsibility Responsible for ACI concrete field tests Responsible for quality control inspections in manufacturing plant Inspect forms before pouring (Pre-Pour). Inspect product after removed from forms (Post-Pour) Notifies Production Supervisor if deficiencies are found. Perform and/or schedule repairs on products as needed. Housekeeping - maintain a clean work area. Including cleanliness within breakroom, restroom, and general facility areas. Expected to maintain knowledge of precast plant techniques and procedures. May assist with precast production operation as needed. Characteristics Always committed to safety. Maintain a safe work area. Follow safe work practices as outlined in the Safety Program. Always committed to quality. Follow and implement quality control measures. Excellent attendance. Reliable means of transportation to and from work. Ability to learn, organize and prioritize work and handle multiple tasks. Outstanding attitude, honesty, and ethic at all times. Expected to use sound judgment, diplomacy, and discretion. Work independently or cooperatively with others. Self-drive in carrying out the functions of the job. Requirements: ACI Concrete Field-Testing Grade 1 Certified (preferred) NPCA PQS Training Must be at least 18 years of age per federal guidelines. Good communication skills, both verbal and written to all levels of staff Ability to remain focused in busy environment. Computers and tablets skills in order to perform tasks. Ability to read blueprints and sketches.

FRAZEYSBURG NOW HIRING MULTIPLE PEOPLE 2nd & 3rd Shift • $15.50/hr • START NEXT WEEK If you need a job FAST, this is it. Show up. Start ASAP. Get paid. Production positions Reliable schedule Bring a friend BOTH get hired Apply at: 65323 Highland Hills Rd, Cambridge OH 43725 (Bring two forms of valid ID) These spots WILL fill. Don't sleep on it.

NOVA Engineering is seeking an ICC Special Inspector in our Panama City Beach, FL location. We are looking for a self-motivated individual with a positive attitude and a strong work ethic. Primary duties performing structural building inspections and QA/QC tests (masonry, reinforced concrete, structural steel, etc.). Some travel is required. The position will be predominately field located. Responsibilities: Perform Inspections in accordance with code and project requirements Interpret project plans and specifications and ensure project requirements are being met Activities will include performing field testing and inspections Review plans and specifications, performing the inspections accordingly Communicate results with contractors, engineers and others Input results and observations into daily reports Requirements: 2+ years construction materials testing and inspection experience is required ICC Certifications (2 or more) is required: Reinforced Concrete, Soils, Structural Steel & Bolting, Welding Check out our Perks + Benefits: In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: Use of take-home Company Vehicle and gas card for daily travel to work sites Comprehensive group medical insurance, including health, dental and vision Opportunity for professional growth and advancement Certification reimbursement Paid time off Company-observed paid holidays Company paid life insurance for employee, spouse and children Company paid short term disability coverage Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection 401K retirement with company matching of 50% on the first 6% of employee contributions Wellness program with incentives Employee Assistance Program NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

Simply Put, A Great Place to Work Benesch is a growing, multi-disciplined planning, engineering, and professional services firm. We enhance infrastructure and communities across the country - creating spaces and providing connections in ways that make a difference. We pride ourselves on being nimble enough to remain responsive to client needs yet large enough to offer exceptional bench strength. As a member of our team, you'll have an opportunity to draw from those resources when you need them and, likewise, contribute your expertise when you have something to share. At Benesch, we are looking for candidates with varied backgrounds and worldviews. We are committed to offering an inclusive work environment where everyone feels valued and respected. Statistics show that women and underrepresented groups are less likely to apply for a position if they don't meet 100% of the qualifications. If this statement resonates with you, don't be so hard on yourself-apply for the job! Construction Representative - Lead Inspector We have a career opportunity for a Construction Representative - Lead Inspector in Novi, MI who will work with a broad range of construction projects with our Construction Services Group In this role you will be responsible for the daily inspection and documentation of infrastructure projects including road, bridge, water main, and sewer construction, as well as play an important role in managing client relationships. You will also contribute to strategic initiatives that drive the growth of the construction group. This position anticipates that you bring some experience with you, being able to lead the inspection or oversight of significant construction tasks with a high level of independence. This position provides progression towards managing multiple project tasks and becoming a project manager. Location This position provides a flexible work schedule, with three days working from the Novi, MI office and two days remotely. The Impact You Will Have Responsible for overseeing one or more key tasks on construction projects and complying with all project and company safety guidelines. Perform construction inspection and documentation and communicate if the work observed appears in compliance with project requirements. Prepare inspector's daily reports and other project documentation as required by the project procedures, and being the example for documentation that supporting staff will refer to and checking their work. Report on progress of work, including technical issues, status of work remaining to be done and any noted deficiencies. Be the main point of contact at the field level for the Benesch team, as well as, preparing calculations and supporting sketches for project documentation. Perform basic documentation audits, log, track and/or prepare responses to submittals and RFI's, and perform materials testing including concrete testing and density testing. Write meeting minutes and conduct select project meetings and participating in client events and relative association activities. Assist with client relationships, as well as, assisting with writing responses to Requests for Proposals from clients. What We Are Looking For BS in Civil or Construction Engineering or in a related engineering curriculum required, EIT preferred. 6-15 years of working experience with MDOT is preferred. Recent college grads are highly encouraged to apply! Experience working on field projects desired. Provide oversight and training of junior staff on projects. Excellent communication and intrapersonal skills. Strong organization and ability to perform services efficiently and within budgets and schedules. Ability to work effectively independently and in a team environment. Must have a valid U.S. driver's license held for a minimum of one year and a safe motor vehicle record meeting company standard. #LI-LM1 Explore the Benefits of Working at Benesch! At Benesch, we prioritize the health and wellness of our employees, understanding that their well-being is crucial for both personal and professional success. We offer a range of benefits for eligible employees, including insurance, retirement plans, and wellness programs. Our Total Rewards package is designed to support a healthy lifestyle and can be customized to meet the needs of our employees and their families. Click here to learn more about some of the benefits of working at Benesch! Professional Development Opportunities for management and leadership development at all levels, including executive coaching and leadership development for Team Leaders, Group Managers, Division Managers, and Executive Leaders Tuition reimbursement for job-related courses Ongoing professional development through resources like Red Vector, LinkedIn Learning, technical team meetings, knowledge-sharing training sessions Personalized training and career development plans with your manager Funding for training, committee work, professional organization memberships, and licenses/certifications Support for active participation in professional organizations to foster leadership and community engagement Retirement Benefits Access to valuable retirement planning tools, education, and individual meetings with plan advisors at no charge Potential for Benesch to contribute up to 9% of your gross compensation to your retirement plan (5% profit-sharing contribution to your 401(k) plan, regardless of your own contributions & 80% match on your contributions, up to a maximum company contribution of 4%) Work/Life Balance Flexible work schedules and hours, including work-from-home options (dependent on the role) Generous Paid Time Benefits (PTB) that increase with your career Immediate use of annual PTB; no accrual needed with the ability to bundle time-off plans for extended vacations or life events Ten days of paid parental leave for birth, adoption, or foster placement Employee Engagement At Benesch, we encourage our team members to extend their impact beyond their core responsibilities. Join our employee resource groups and committees to enhance your work-life balance and contribute to our community-focused initiatives. We support a variety of programs including community service, student scholarships, and matching gift opportunities, reflecting our commitment to a vibrant and diverse workplace. If you are based in California, we encourage you to read this important information for California residents linked here. Benesch is firmly committed to Equal Employment Opportunity (EEO) and prohibits employment discrimination for employees and applicants in all protected groups, including veterans and individuals with disabilities, or other status protected by federal, state, and local laws. Know your Rights: Workplace Discrimination is Illegal We will be accepting applications on an ongoing basis until a candidate is found. Benesch is committed to working with and providing reasonable accommodation to applicants with a physical disability or other impairment. If you are limited in your ability or are unable to access Benesch's Careers website due to a physical disability or other impairment, you may request a reasonable accommodation by emailing *****************************. This option is only available to those in need of an accommodation due to a disability or other impairment. Please do not use this as an alternative method for general inquiries or status on applications, as you will not receive a response. Reasonable requests will be responded to as soon as possible on a case-by-case basis. Recruiters or staffing agencies: Benesch is not obligated to compensate any external recruiter or search firm who presents a candidate, their resume, or profile to a Benesch employee without a recent, current, and fully executed agreement on file. Please direct all communications to the HR team at *****************************

**About the Role:** TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. **About TAI:** TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. **Here's a glimpse into your day to day:** + Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. + Ensure project deliverables meet TAI and client expectations + Manage all phases of a project - setup, execution, and closeout + Develop and maintain project schedules and budgets. + Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. + Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. + Perform overall project quality control. + Visit field to scope out projects. + Support proposal development by assisting with scope development, cost estimating and execution plan coordination. + Experience and knowledge of Magnetic Flux Leakage Technology (MFL). + Experience and knowledge of floating roofs and seal inspections. + Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. + Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. + Conduct daily safety risk assessments on routine and non-routine job tasks. + Scheduling activities related to inspection. + Prepare isometric drawings and field sketches of piping for pipe inspections + Review and interpret P&ID's + Writes detailed inspection reports and maintains documentation of inspection activities. + Identifies circumstances that necessitate the use of proper safety procedures and equipment. + Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. **You'll be a perfect fit if you have:** + High School Diploma, some college coursework preferred. + API 653 Certification. + Have a minimum of 10 years' experience working as an API Inspector within related industry + At least 5 years' experience managing large Above Ground Tank Inspection projects. + Prior experience supervising a project team + Self-motivated individual with the ability to work independently and oversee large projects. + Experienced with using Magnetic Flux Leakage Technology (MFL) + Demonstrated ability to perform complete inspection reports for equipment or piping. + Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. + Documentation: Clarity, comprehensiveness, and professional presentation of reports. + High reach operation ability. + Demonstrated leadership, interpersonal and communication skills. + Travel: Will travel up to 50% out of town. _Physical Requirements:_ + Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. + Must be able to remain in a stationary position as necessary to complete assigned tasks. + The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. + Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. + Must be able to ascend and descend a large quantity of stairways at any given time. + Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. + Occasionally lift and move equipment in excess of 100lbs in a safe manner. + Must be able to work in outdoor weather conditions as needed. **Compensation and Benefits:** + Pay: $55-65/hour (based upon experience) + Annual Profit Sharing Bonus (variable) + PTO and Paid Holidays + Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! + 401(k)with employer match **Other Offerings:** + The opportunity to make a real impact on a variety of industry-leading projects. + The ability to balance your work and family activities. + Flexible work schedule + Work in a dynamic and collaborative environment that values creativity and innovation. + A chance to learn and grow alongside some of the brightest minds in engineering. + Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at *********************** TAI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.