Process Engineer jobs at Knowles - 1122 jobs

Leadership & Strategy Develop and manage a high‑performing organization of Engineers and Technicians; set vision, standards, and career paths. Establish an engineering operating system with clear cadences, gemba presence, and action‑oriented problem solving. Create visibility to critical metrics (project funnel/status, Cp/Cpk, FPY, OEE, yield/scrap, DPPM, on‑time NPI, cost savings) and drive accountability to targets. Process Engineering & Control * Define and maintain process control plans, PFMEAs, work instructions, and standard work to ensure process capability and stability. * Deploy statistical process control (SPC) and advanced analytics to monitor health, detect drift, and trigger corrective actions. * Lead structured root‑cause and corrective action (8D, A3, 5‑Why) for process excursions and customer/internal escapes. New Product Introduction (NPI) & Design Transfer * Participate in cross‑functional design reviews to ensure Design for Manufacturability/Assembly/Cost (DFM/A/DFC) and robust process capability requirements. * Own process development and production qualification plans for new equipment and processes (e.g., URS, FAT/SAT, IQ/OQ/PQ), including AS9145/APQP deliverables as applicable. * Partner with Product Engineering, Quality, and Operations to achieve predictable ramp, repeatability, and capacity readiness. Continuous Improvement & Lean * Build an improvement portfolio aligned to site strategy; prioritize high‑impact kaizen and DMAIC projects with Operations and Quality. * Standardize problem‑solving, visual management, and line‑balance/time studies to remove waste and improve flow. Capital & Technology Enablement * Evaluate, prioritize, and justify capital expenditures with robust business cases; lead vendor selection, installation, and release to production. * Advance digital/automation capabilities (MES/SPC systems, advanced Excel; Minitab/JMP or similar) to elevate process insight and decision making. Financials, Compliance & Safety * Achieve financial objectives (productivity, cost reduction, budget adherence) for area of responsibility. * Ensure compliance with AS9100/AS9145, APQP/PPAP where required, and applicable ITAR/export‑control requirements. * Apply knowledge of relevant MIL‑STDs and customer specifications; support internal/external audits. * Champion EHS best practices and ergonomic/ESD controls within the production environment. * BS in Engineering (Mechanical, Electrical, Materials, Industrial, or related). * 10+ years progressive experience in Process Engineering, Product Engineering, or Operations within electronics components, semiconductor, or similar high‑reliability manufacturing. * Proven experience managing multiple direct reports and building technical teams. * Demonstrated project management capability (charter through sustainment); track record of delivering measurable improvements. * Hands‑on deployment of Lean/Six Sigma methods; expert use of DOE, SPC, MSA/Gage R&R, PFMEA, Control Plans, and 8D problem solving. * Strong analytical skills; proficiency with Microsoft Office (advanced Excel) and statistical tools (e.g., Minitab/JMP). * Excellent written and verbal communication; able to influence across Engineering, Quality, Operations, Supply Chain, and Leadership. * Detail‑oriented, systems thinker with urgency for action and a focus on the customer. Preferred: * MS or MBA degree. * PMP and/or Lean Six Sigma Black Belt certification. * Experience with AS9100, AS9145, APQP/PPAP, and familiarity with ITAR requirements. * Working knowledge of MIL‑STDs relevant to high‑reliability electronic components. * Exposure to MES/SPC software, automation/robotics integration, and advanced data analysis/visualization (Power Query/Power BI, SQL basics). Success Measures (first 12-18 months) * ≥ X% improvement in FPY/OEE and sustained Cp/Cpk at or above specification across top critical processes. * On‑time completion of the NPI/process qualification roadmap with zero late gate exits. * Delivery of an annualized cost‑savings and waste‑reduction plan meeting or exceeding target. * Team engagement, retention, and development metrics trending positively; built bench strength and documented standards/workflows. Work Environment * Primarily on‑site in a manufacturing environment with regular time on the production floor. * Occasional travel to suppliers, other sites, and customers ( * Competitive salary and benefits package * Opportunities for professional development and growth * A dynamic and collaborative work environment focused on innovation and continuous improvement. * Flexible PTO * Paid holidays * Prescription Drug Plans * Retirement Savings Plan (401k): * Basic Life Insurance * Onsite Physician * Employee Referral Program Join our team and play a pivotal role in transforming our manufacturing processes to achieve greater efficiency and excellence. We are committed to providing a competitive and fair total compensation package for all employees. One element in our total compensation package is base pay. The starting base pay for this role is $110,000 to $140,000 per year. Individual compensation decisions are based on a number of factors, including but not limited to previous experience and skills acquired prior to joining us, cost of living in the assigned work location, assigned schedule, and salaries of similarly situated peers at the company. It is to be expected that candidates will come to us with different sets of skills and experiences and therefore will be paid at different points in the stated range. We recognize that the person(s) we select for hire may be less experienced or more experienced than the role as posted; if this is the case, any updates to available salary ranges will be communicated with candidates during the recruitment process. Knowles' Cornell Dubilier brand is a leading designer and manufacturer of custom high-energy discharge capacitors used in a wide range of medical, military, and commercial pulsed energy applications. Equal Opportunity Statement: We prohibit pay discrimination and discrimination of any kind based on race, color, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation, or other legally protected status. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our career's portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

About Us: BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping our clients realize their most critical goals from Strategy to Commercialization. As the only firm born from a manufacturing technology company to become an independent and fully integrated firm, we combine deep domain expertise in the manufacturing environment with an approach that is built to serve the dynamic needs of our clients. Rooted in our distinct culture of Truly Human Leadership, we cultivate the leaders who will define tomorrow and partner with our clients in the food & beverage, life sciences, industrial, and advanced technology industries to build the future of manufacturing and technology. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: Process Engineer Who You'll Work With You will join one of our 45 offices in the US, be part of a committed team of over 1500 professionals, and work in teams and directly with our clients doing work that is shaping the world around us. You will be welcomed into a rapidly growing business and team and empowered to make an impact. You will be valued, cared for, and challenged on your path to becoming a world-class professional consultant and surrounded by leaders who are committed to creating an environment that enables you to realize your own success and fulfillment. When you join Design Group as a Process Engineer, you are joining a team that will challenge you and position you for growth. In this role, you will work with a team of industry experts to help the world's leading companies solve their most difficult problems. You will join our Architecture/Engineering Process Practice and partner with seasoned leaders, technical specialists, and subject matter experts to deliver the highest quality solutions to our clients with consistency and accuracy. What You'll Do You'll work individually and in teams to support capital projects and implement solutions for our clients. Together, you will help our clients make critical changes to improve their performance and realize their most important goals. Manage process mechanical design for the manufacturing of sterile products in the pharmaceutical, biological, and medical device industries Assist with the design of Oral Solid Dosage manufacturing facilities Assume responsibility for all phases of project execution including concept/strategic planning, engineering design, construction, and turnover to validation in the execution of EPCMV projects Execute a wide range of projects including system enhancements/unit operation optimization and greenfield construction Ensure that manufacturing, facilities and maintenance, quality, and validation systems are designed in accordance with current Good Manufacturing Practices Develop process flow diagrams (PFDs), prepare energy and mass balance calculations, and conduct cycle time, bottleneck, and gap analyses Handle equipment selection, sizing, and specifications, and create utility requirement matrices Develop process construction documents including piping & instrument diagrams (P&IDs) and equipment general arrangement drawings Create piping plans including orthographic and isometric drawings, operator access platform and equipment support drawings, line lists, tie-in lists, installation specifications, bills of material (BOM), and scopes of work Direct the work performed by CAD designers Facilitate design coordination with controls/automation systems, utilities systems, and building systems Provide on-site support during system installation, testing, start-up, commissioning, and qualification Develop project scopes and assist with preparation of proposals for engineering/design services Keep abreast of new and emerging technologies and current Good Manufacturing Practices Make an impact day-to-day with your skills and expertise, strengthening that relationship with our clients and team What You'll Bring A minimum of three years of relevant biologics, pharmaceutical, biotechnology, or medical device process system engineering/design experience Design experience in upstream/downstream processes, single use systems, CIP/SIP, support equipment (washers, autoclaves, lyophilizers), and high purity water systems (WFI, RODI) Experience in the design, installation, and startup of traditional bioprocess equipment, GXP utility systems, or field supervision of trades during construction and commissioning Experience with the design of Oral Solid Dosage manufacturing facilities A working knowledge of process definition means and methods including identifying process unit operations An understanding of FDA and EMA regulatory standards A familiarity with process control methodologies and control valves and instrumentation Experience developing functional specifications Excellent written and verbal communication skills and the ability to successfully interact with our team members and clients Proficiency in AutoCAD (basic), Microsoft Office, and Microsoft Project (basic) Familiarity with 3D modeling, computer-based hydraulic analysis, and process simulation software (preferred) A willingness to travel for project requirements including installation and start-up activities, client and company sponsored meetings, trainings, industry related seminars, forums, and conventions A bachelor of science in in chemical or mechanical engineering, bioengineering, or a similar engineering degree with applicable life science industry, consulting, or project experience Our culture and commitment to our people is what sets us apart. We foster an environment of mutual respect, integrity, and unconditional interest in the individual and collective success of our professionals. Our model and entrepreneurial mindset offer a rewarding, challenging, and highly flexible path. As a Process Engineer, you will build a meaningful and fulfilling career with the support of professional development resources and mentorships including our First Year Experience program, Individual Development Plans, and Career Path resources and tools. You will be surrounded by exceptional talent who will support your development as both a world-class engineer and a highly effective leader. Feel like you're on the path to becoming a Process Engineer but you're not quite there yet? We'd love to connect with you to see if we can take you from where you are today and grow you into a Design Group Engineering Consultant. The approximate pay range for this position is $50 - $100 per hour. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. #LI-JF1 At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Design Group

A semiconductor technology company is seeking a Senior Staff Engineer in Device Process Engineering in San Diego, CA. This role focuses on optimizing semiconductor processes for RF circuits, collaborating with teams to drive innovation, and mentoring staff. Candidates should have 8-12 years of experience in the semiconductor industry and hold an advanced degree in a relevant field. The position offers a competitive salary ranging from USD 177,975 to 231,381 annually. #J-18808-Ljbffr

Viking Technology, a division of Sanmina Corporation, leads the Enterprise and Embedded server and storage market in Solid State Drives (SSD), DRAM, and hybrid storage technologies. With a breadth of solutions that bridge both SSD and DRAM, Viking Technology has the ability to deliver any storage solution from high-performance computing SSDs down to embedded kiosk flash devices. Viking Technology has over two decades of focused storage and DRAM development, delivering high technology solutions that optimize the value and performance of customers' applications in the Enterprise, Network Infrastructure, Embedded, and Defense & Aerospace markets. With an extensive product breadth of SSD and DRAM, Viking Technology stands as one of the top Tier storage solution provider in the market. Job Purpose: Candidate will lead the design and development of innovative microelectronics packaging solutions for high density memory products targeted at the defense, aerospace, and commercial markets. Nature of Duties/Responsibilities: Lead a team of engineers and subcontractors in the development and qualification of DRAM and Flash products including multichip modules (MCM), plastic ball grid array multichip packages (MCP), and System-In-Package (SiP) solutions. Responsible for project scheduling and execution, project status reporting, and providing technical guidance to the team. Interface directly with onshore and offshore assembly and test subcontractors (OSAT) and OEM customers. Some travel may be required. Education and Experience: Minimum 10-12 years related experience. BS in Microelectronics Packaging, EE, Mechanical Engineering, Physics, or Materials Experience in the design of semiconductor packages such as plastic ball grid arrays, MultiChip Packages (MCPs), and System-in-Package (SiP). Solid understanding of semiconductor package design parameters and their influence on cost, thermal and electrical performance, reliability, and manufacturability Experience leading cross-functional engineering teams in complex microelectronics packaging projects. Project management experience including scheduling, status reporting, and subcontractor management. Thorough understanding of microelectronics package design flow, including mechanical design, signal integrity simulation, thermal simulation, schematic capture, and PCB layout Thorough understanding of high volume manufacturing processes for semiconductor ICs (backend packaging and test) Familiarity with silicon wafer post-process techniques such as wafer thinning, dicing, and RDL application. Thorough understanding and experience in packaging qualification testing techniques and industry standard test methods Experience interfacing directly with onshore and offshore microelectronics assembly and test subcontractors (OSAT) Experience with printed circuit board assembly, SMT processing equipment and methods Familiarity with integrated circuit functional test and burn in techniques. Excellent verbal and written communication skills PACKAGING Skills Wafer level packaging, Wafer preparation (dicing, grinding, wafer expansion, die singulation) Die pick and place, Die Attach, Die Stack, MEMS die, FLIP CHIP, Underfill, Thermo-compression bonding, WIREBOND, Molding (transfer mold) Compression mold, vacuum mold, film-assist mold), Dam and Fill dispense, Ball Attach, Solder Reflow, Singulation, Tape and Reel, SMT (Surface Mount Technology). Packages handled and developed: QFP, TQFP, SOP, TSOP, QFN, Flip Chip, Cu pillar FC, BGA, CSP, FAN-OUT WAFER LEVEL PACKAGING (FOWLP), 2.5DIC, 3DIC, Thru mold vias, Thru-silicon Sanmina is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity This is an ITAR facility. Must be US Citizen or lawful permanent resident. #J-18808-Ljbffr

Your Organization Manufacturing Engineer Altec AIR New York manufactures large desiccant dryers for a variety of applications, including oil and gas, industrial compressed air, and process control to name a few. We are a small and dynamic team located outside of Buffalo, NY, about a half hour drive from Niagara Falls. Altec AIR has developed a multi-functional role here at Altec's Lancaster, NY, facility, reporting to the Sr. Staff Engineer. We are a relatively small operation with no formal compartmentalizing of engineering roles. * Bachelor's degree from an accredited university in Engineering , Mechanical, Industrial, Manufacturing, Electrical engineering or Aerospace * Minimum one year experience required, two years preferred Salary range: $77,00 - $91,500 (wage may be adjusted commensurate upon work experience). The job level may be adjusted at the time of hire should the selected candidate meet the qualifications of a more experienced job in the career path Job posting open until 2/7/26 The demands on our engineering team change day-to-day as we strive to achieve total customer satisfaction. The qualified candidate will lead us forward as we focus on improving Manufacturing and Quality processes. This role will emphasize traditional Manufacturing and Quality engineering duties, while at times and to varying degrees require basic product design skills. Manufacturing Engineering (40%) Work with Plant Manager and production associates to identify areas for improvement, such as cell layout, designing tools and fixtures, workflow, inventory reduction, component cost and labor reduction, etc. Plan and lead RCI events Learn and effectively manage the Altec AIR ERP System, with respect to engineering responsibilities (part creation, BOMs, routings, etc.) Quality Engineering (40%) Work with Altec Corporate Quality to identify opportunities for improving Altec AIR's Quality Audit score Develop Supplier and Production Quality Systems Provide engineering support to outside sales and service Assist Tech Support in troubleshooting compressed air systems in the field and in production Identify and resolve product support and other quality issues by facilitating changes to the design or manufacture of our products Identify warranty and production top drivers, perform root cause analysis, and implement corrective actions Product Design/New Product Development (20%) The required design skills for this role do not demand a Mechanical Engineering degree, but the qualified candidate will be able to perform basic product design tasks, such as: Design and specification of sheet metal components Understanding of basic electrical circuits (volts, amps, and power consumption) and pneumatic systems Participate on Altec AIR's PCP teams to develop new products within scope, manufacturability, serviceability, and efficiency Create and update engineering drawings according to Altec AIR's Engineering standards In addition to the bachelor's degree and experience, Altec Manufacturing and/or Quality experience preferred Can confidently and independently work with domestic and international suppliers to identify and improve top drivers of Quality, Cost, Delivery, Safety Knowledge of Solid works: Part, assembly and drawing creation, configurations, sheet metal modeling Understanding of pneumatic systems with confidence to develop skill in troubleshooting Academic exposure to psychrometrics is preferred (measurement of gas-vapor mixtures), ability and willingness to learn and apply it required Please apply online at jobs.altec.com Comprehensive benefits including Medical, Dental and Prescription Drug Program - Retirement 401(k) Program - Vacation and Holidays - Flexible Spending Accounts - Tuition Assistance Program - Employee Assistance and Mental Health/Substance Abuse Program - Life Insurance, Accidental Death and Dismemberment Insurance Altec Industries, Inc. and its affiliates are equal opportunity employers and maintain affirmative action plans to recruit, retain, develop, and promote qualified individuals without unlawful consideration of race, gender, color, religion, sexual orientation, gender identity, national origin, age, disability, citizenship status, veteran status, or any other characteristic protected by federal, state or local law. Altec strives to maintain a work environment free from unlawful discrimination and harassment, where associates are treated with respect and dignity.

Unify was founded January 17th, 2023 by Austin Hughes and Connor Heggie. Prior to Unify, Austin led Ramp's growth product team focused on new customer acquisition, and Connor was a machine learning research engineer at Scale AI. The rest of our team comes from companies like Airbnb, Spotify, Bridgewater and LinkedIn. Our mission is to build the first system-of-action for go-to-market teams, starting with an end to end platform powering warm outbound. Today, outbound sales is dominated by cold, mass outreach that floods people's inboxes and converts to deals at a tiny rate. We're building a platform to power warm outbound, allowing go-to-market teams to get in touch with the right people at the exact time they're looking for a solution. We've grown revenue 8x year-over-year, and are already serving customers like Guru, Justworks, Together.AI, Flock Safety, Hightouch and more. We're a high energy, high intensity team and we've raised $58M from Thrive, Emergence, OpenAI and others. Come join us in changing how go-to-market works. About the Role Unify is redefining go-to-market with state-of-the-art AI. As a Senior SRE, you'll tackle the scaling and reliability challenges that come with adding terabytes of data monthly and supporting enterprise customers with demanding uptime requirements. You'll work across the stack-optimizing databases, hardening services, and building the automation and observability that keep Unify fast and reliable at scale. What You'll Do Scale our data infrastructure: Optimize and extend our ClickHouse and PostgreSQL deployments-designing partitioning strategies, tuning queries, and improving replication and failover systems. Improve system performance: Profile and optimize critical paths across backend services, identify bottlenecks in data pipelines and API layers, and ship changes that improve latency and throughput. Build for reliability: Implement rate limiting, circuit breakers, graceful degradation, and other patterns that keep the platform stable under load and during partial failures. Automate everything: Write tooling that eliminates toil-automating deployments, scaling operations, backup verification, and incident remediation. Instrument and observe: Build out distributed tracing, metrics, and alerting that give engineers clear visibility into system behavior and accelerate debugging. Respond and learn: Participate in on-call rotations, run incident response, and drive blameless postmortems that prevent recurrence. Who You Are 5+ years of software engineering experience with a strong backend foundation, including 2+ years focused on reliability, infrastructure, or platform work. Hands‑handon experience operating databases at scale including query optimization, replication, and failover. Strong programming skills (Typescript, Python, Go, or similar) with experience building automation and tooling. Able to diagnose complex distributed systems issues under pressure and communicate clearly during incidents. Collaborative, low-ego attitude and desire to work in a fast‑paced environment. #J-18808-Ljbffr

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

The Bay Area Air District (Air District) is a regional government agency committed to achieving clean air to protect public health and the environment. We regulate industrial facilities and administer outreach and incentive programs to encourage clean air choices across seven counties (Alameda, Contra Costa, Marin, San Francisco, San Mateo, Santa Clara, and Napa) plus portions of Solano and Sonoma. We strive for a diverse, inclusive workplace with pay equity, work-life balance, and opportunities for growth. We are accepting applications for the position of Principal Air Quality Engineer, for three full-time, represented positions: one in the Regulatory Development Division and two in the Engineering Division. The job description below outlines division-specific responsibilities and program focus, as well as qualifications and application details. Regulatory Development Division The Regulatory Development Division works with staff, management, executives, and Board members to develop and modify Air District rules to provide emissions reductions, improve air quality, and protect the climate. The Principal Air Quality Engineer for the Regulatory Development Division will: work closely with professional and technical staff to perform and lead complex program assignments for developing regulations to control air pollutants (including those contributing to climate change and local air quality impacts in overburdened communities) work with the California Air Resources Board, other local air districts, community groups, community members, environmental organizations, regulated industries, and other key stakeholders to reduce harmful air pollutants, especially in communities overburdened by air pollution lead, conduct, and coordinate scientific, economic, and technical research work review and draft regulatory language, develop and implement cost effectiveness and incremental cost effectiveness calculations for a wide variety of sources in an industry with various control options analyze emissions inventories to determine baseline emissions and reduction estimates for rules under development brief Air District executives and present at workshops and board meetings work closely with the Community Engagement Division staff and other Air District divisions to strengthen partnerships with key community stakeholders perform related work as assigned Engineering Division The Engineering Division evaluates permit applications and reviews permit renewals for equipment and operations that emit air pollutants within the Air District's jurisdiction. It provides technical support to other programs and assists businesses, trade associations, agencies, environmental groups, and community members with permitting and compliance issues. The division is responsible for implementing the Air District's Facility Risk Reduction Program to reduce health risks from existing facilities or sources. The position will work on the Air District's Toxic Air Contaminant (TAC) Control Programs, designed to identify, assess, and reduce public exposure to toxic air contaminants. The programs integrate federal, state, and local regulations to: Monitor and evaluate TAC emissions from permitted facilities through annual emissions inventories and health risk assessments Implement the Air Toxics New Source Review (NSR) program, requiring preconstruction review and risk assessment for new or modified TAC sources Operate Facility Risk Reduction Programs, targeting existing facilities to identify, assess, and reduce health risks, especially in communities with disproportionate air quality impacts Engage with community stakeholders and provide transparent access to emissions data and health risk information through annual reports and online tools These efforts have led to significant reductions in health risks from toxic air contaminants across the Bay Area. The Engineering Division also engages in programs and projects including, but not limited to: Dispersion modeling and health risk assessments for toxic emissions Verification of emissions inventories Database development and data management Development of new regulations or amendments of existing regulations Strategic planning of division programs The Principal Air Quality Engineer for the Engineering Division may perform other complex and highly specialized air quality engineering work, including: Processing permit applications for complex facilities Analyzing air emissions and other metadata Evaluating program effectiveness Providing project leadership This role also involves peer review, staff mentoring, and training. The incumbent may lead or contribute to sensitive, high-profile projects and deliver technical presentations to the Board of Directors, public, industry, and partner agencies, and may represent the Air District in multi-agency working groups. Definition Under direction, performs the most complex and highly specialized level of assigned air quality engineering activities and may supervise staff on a project basis or lead project teams; performs related work as assigned. Distinguishing Characteristics Under direction, performs the most complex and highly specialized level of assigned air quality engineering activities and may supervise staff on a project basis or lead project teams; performs related work as assigned. Education & Experience Equivalent to graduation from a four-year college or university with major coursework in environmental, chemical, mechanical or petroleum engineering or a closely related field, and four years of air quality environmental engineering experience. Alternatively, a Master's Degree with the same focus and four years of experience. Other Requirements Must possess a valid California driver's license and a valid California Professional Engineer license. How to Apply & Selection Criteria How to Apply Interested individuals must submit a completed Air District application and responses to the supplemental questionnaire by 5:00 p.m. on Monday, November 3, 2025. Resumes are encouraged but not mandatory and will not be accepted in lieu of the required application materials. Applications are accepted online; please visit our website at ******************* to apply. Postmarks, faxes, and e-mailed applications will not be accepted. Except as requested, do not include additional documents. They will not be considered. Supplemental Questions Instructions Applicants must respond to each required supplemental question. Limit responses to no more than one page (500 words) per question. Do not reference your resume or other documents. This information will be evaluated to determine the most directly related experience, education, and training. Selection Criteria Selection may be based on a competitive exam (written, interview, or both). Depending on applicant volume, an application screening and/or panel interview may be used. The Air District may hire from this process to fill future vacancies for 18 months. Persons with disabilities who may require accommodations should notify the Human Resources Office. The Air District is an Equal Opportunity Employer. #J-18808-Ljbffr

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

Unify was founded January 17th, 2023 by Austin Hughes and Connor Heggie. Prior to Unify, Austin led Ramp's growth product team focused on new customer acquisition, and Connor was a machine learning research engineer at Scale AI. The rest of our team comes from companies like Airbnb, Spotify, Bridgewater and LinkedIn. Our mission is to build the first system-of-action for go-to-market teams, starting with an end to end platform powering warm outbound. Today, outbound sales is dominated by cold, mass outreach that floods people's inboxes and converts to deals at a tiny rate. We're building a platform to power warm outbound, allowing go-to-market teams to get in touch with the right people at the exact time they're looking for a solution. We've grown revenue 8x year-over-year, and are already serving customers like Guru, Justworks, Together.AI, Flock Safety, Hightouch and more. We're a high energy, high intensity team and we've raised $58M from Thrive, Emergence, OpenAI and others. Come join us in changing how go-to-market works. About the Role Unify is redefining go-to-market with state-of-the-art AI. As a Senior SRE, you'll tackle the scaling and reliability challenges that come with adding terabytes of data monthly and supporting enterprise customers with demanding uptime requirements. You'll work across the stack-optimizing databases, hardening services, and building the automation and observability that keep Unify fast and reliable at scale. What You'll Do Scale our data infrastructure: Optimize and extend our ClickHouse and PostgreSQL deployments-designing partitioning strategies, tuning queries, and improving replication and failover systems. Improve system performance: Profile and optimize critical paths across backend services, identify bottlenecks in data pipelines and API layers, and ship changes that improve latency and throughput. Build for reliability: Implement rate limiting, circuit breakers, graceful degradation, and other patterns that keep the platform stable under load and during partial failures. Automate everything: Write tooling that eliminates toil-automating deployments, scaling operations, backup verification, and incident remediation. Instrument and observe: Build out distributed tracing, metrics, and alerting that give engineers clear visibility into system behavior and accelerate debugging. Respond and learn: Participate in on-call rotations, run incident response, and drive blameless postmortems that prevent recurrence. Who You Are 5+ years of software engineering experience with a strong backend foundation, including 2+ years focused on reliability, infrastructure, or platform work. Hands‑handon experience operating databases at scale including query optimization, replication, and failover. Strong programming skills (Typescript, Python, Go, or similar) with experience building automation and tooling. Able to diagnose complex distributed systems issues under pressure and communicate clearly during incidents. Collaborative, low-ego attitude and desire to work in a fast‑paced environment. #J-18808-Ljbffr

pSemi Corporation is a Murata company driving semiconductor integration. pSemi builds on Peregrine Semiconductor's 30-year legacy of technology advancements and strong IP portfolio but with a new mission-to enhance Murata's world-class capabilities with high-performance semiconductors. With a strong foundation in RF integration, pSemi's product portfolio now spans power management, connected sensors, optical transceivers, antenna tuning and RF frontends. These intelligent and efficient semiconductors enable advanced modules for smartphones, base stations, personal computers, electric vehicles, data centers, IoT devices and healthcare. From headquarters in San Diego and offices around the world, pSemi's team explores new ways to make electronics for the connected world smaller, thinner, faster and better. Job Summary The Device Engineering Process role focuses on the development, integration, and optimization of semiconductor process technologies to support high-performance RF circuits. This includes collaborating with wafer foundries, defining and refining process modules (e.g., lithography, etching, deposition), and ensuring device reliability through rigorous testing and analysis. The engineer applies deep knowledge of device physics and process interactions to enable robust, scalable RFIC solutions aligned with technology roadmaps and product requirements. Responsibilities Define and drive execution of the technology roadmap for RFIC processes. Present technical strategy and roadmap updates to senior leadership. Drive innovation and contribute to intellectual property generation. Guide teams in advanced failure analysis and process construction methodologies. Ensure alignment of process development with product and business goals. Lead cross-functional project delivery with high autonomy and accountability. Develop and validate new process building blocks for next-generation technologies. Mentor staff and senior engineers to elevate technical capabilities. Use advanced modeling tools for EM, thermal, and mechanical simulations. Lead strategic process development initiatives with internal teams and external foundries. Minimum Qualifications (Experience and Skills) 8-12 years of experience in semiconductor industry Ability to define and execute technology roadmaps. Ability to mentor senior engineers and technical staff. Deep understanding of semiconductor manufacturing. Excellent communication and stakeholder engagement. Experience guiding advanced failure analysis efforts. Experience managing cross-functional teams and projects. Experience with modeling and simulation tools. Mastery of semiconductor process integration and layout interactions. Proven track record of innovation and IP contribution. Strong leadership and strategic thinking skills. Education Requirements MS or PhD in Electrical Engineering, Physics, Material Science, or related field. USD 177,975.75 - 231,381.29 per year Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the ability to occasionally lift office products and supplies, up to 20 pounds. pSemi Corporation supports a diverse workforce and is committed to a policy of equal employment opportunity for applicants and employees. pSemi does not discriminate on the basis of age, race, color, religion (including religious dress and grooming practices), sex/gender (including pregnancy, childbirth, or related medical conditions or breastfeeding), gender identity, gender expression, genetic information, national origin (including language use restrictions and possession of a driver's license issued under Vehicle Code section 12801.9), ancestry, physical or mental disability, legally-protected medical condition, military or veteran status (including “protected veterans” under applicable affirmative action laws), marital status, sexual orientation, or any other basis protected by local, state or federal laws applicable to the Company. pSemi also prohibits discrimination based on the perception that an employee or applicant has any of those characteristics, or is associated with a person who has or is perceived as having any of those characteristics. Note: The Peregrine Semiconductor name, Peregrine Semiconductor logoand UltraCMOS are registered trademarks and the pSemi name, pSemi logo, HaRP and DuNE are trademarks of pSemi Corporation in the U.S. and other countries. All other trademarks are the property of their respective companies. pSemi products are protected under one or more of the following U.S. Patents: ************************ #J-18808-Ljbffr

WARNING about fake job posting scams. There has been a recent wave of scams whereby third parties post fake job openings using a bogus email address that resembles ****************. Under the guise of asking you to fill out an application, the scammers are attempting to gather your personal information. See the Federal Trade Commission's warning on this topic at: ******************************************* The only official source for actual Biolinq job postings/openings is at *********************** . While other job sites (such as LinkedIn, Indeed or Glassdoor) may pull from Biolinq's careers web page, you should visit *********************** to verify the accuracy of the openings found on third party web sites. About the Company Biolinq is a venture-backed digital health company developing a wearable biosensor platform that measures biomarkers important to the management of many clinical conditions including diabetes. This dynamic role is a part of a team of engineers and scientists developing a novel intradermal biosensor technology and the associated software data extraction and rendering SDK that will transform the way people manage their metabolic health. Job Purpose Responsible for activities and area goals through qualification, deployment, and sustaining at the component and finished product level. Duties and Responsibilities Support production monitoring with in-process test execution and trending. Define appropriate alert and action limits based on process performance. Maintain effectiveness of manual test methods through training and certification process. Assess equipment and process for ergonomics and safety. Partner with appropriate vendors to design tooling for production fixturing. Identify system-process interactions using standard tools (p-diagram, SIPOC, VSM). Design or modify existing equipment and fixtures for usability and robustness in manufacturing. Maintain equipment related documentation (manuals, drawings, specifications). Complete line replication and re-qualification activities to support demand, including at key suppliers. Maintain risk documentation (PFMEA) for new failure modes and mitigations. Coordinate with Planning to manage build schedule and material allocation per demand. Provide guidance and training to operators on engineering and V&V builds, as needed. Confirm team comprehension of builds requests, redlines, and special instructions. Develop sustaining cost model for lab supplies, consumables, fixtures, and spare parts. Collect time measurements and process videos to baseline headcount needs. Provide voice of manufacturing to ensure successful transfer from R&D to production. Remediate build documentation for clarity and standardization. Develop hands-on training materials for critical processes and equipment (pipetting, etc.). Develop job aids and other guidance documents to support process adherence. Provide technical training to operators for assigned equipment and processes. Identify and implement mistake-proofing opportunities. Participate in daily meetings to review build plan, metrics, and escalations needing support. Complete standard work activities to monitor production status and identify gaps. Complete periodic work (equipment setup, test verification, etc.) to support build plan. Maintain equipment status (preventative maintenance, corrective maintenance, spare parts) to minimize line disruption (OEE); Revise schedule and activities as appropriate based on history and risk. Monitor and replenish inventory levels of production materials, fixtures, and supplies. Submit purchase requisitions for items required by manufacturing and engineering projects. Support 5S adherence in manufacturing by completing routine audits and identified actions. Resolve technical or logistics issues impacting build delivery. Complete root cause investigation and actions for non-conformances (NCMR, CAPA, SCAR). Monitor production performance through control charting, reject pareto, and review of process capability (SPC). Maintain up-to-date model data (manual time, auto time, cost) for assigned processes. Share performance trends, insights, and strategic insights with cross-functional team for alignment. Develop data collection and integration processes for visibility to production status. Support facility expansion, site transfer, and capacity planning activities. Optimize processes for quality, efficiency, and process repeatability at the lowest cost. Complete standardized work and line balancing activities to optimize production output. Utilize problem solving techniques to identify root causes to technical issues (rejects, equipment availability, etc.) and implement sustainable countermeasures to address them. Investigate device observations and field complaints related to manufacturing process. Collaborate with R&D, Supply Chain, and Quality to drive actions, priorities, and trade-offs required to meet targeted COGS. Complete change impact assessment to align implementation plan for proposed changes. Evaluate and implement 2nd source vendors for manufacturing supply risk. Define appropriate lot size and packaging format for raw materials to scale with demand. Integrate external and internal processes to optimize end-to-end supply chain. Transfer peripheral processes and subassemblies to contract manufacturing sites. Manage manufacturing activities and project execution with external vendors. Support communication, collaboration, and strategic relationship with key suppliers. Develop business processes, infrastructure, and tools to improve manufacturing execution. Requirements Qualifications BS Degree in Mechanical Engineering, Bioengineering, Chemical Engineering, Manufacturing Engineering, or scientific discipline required Minimum 8-12 years related experience, including years of higher-level education (MS, PhD) Experience in design of experiments and statistical tools (ANOVA, t-test, etc.) Experience with Fishbone, A3, 5Y, and other root cause investigation tools Strong understanding of process interactions (inputs, outputs) that are both technical and system related Expertise with scaling manufacturing processes to commercial volumes Experience with budgeting, cost management, modeling, and preparing business proposals (ROI, NPV) for new initiatives seeking executive approval Strong understanding of FDA 21 CFR Part 820 and ISO 13485 quality and regulatory standards Experience with lean manufacturing and six sigma methodologies (preferred) Experience with design for manufacturability concepts and product development lifecycle (preferred) Experience with standard electrical, mechanical, and wet lab test equipment (preferred) Strong leadership skills, including the ability to set goals, allocate resources to appropriate priorities, and provide constructive feedback to foster positive relationships Proficiency in Microsoft Office tools Proficiency with JMP, Minitab, or equivalent statistical software Experience with ERP, MES, and other manufacturing systems Proficiency in BMRAM or equivalent asset management system Expertise in several specialty skillset, including injection molding, welding, analytical chemistry, microscopy, metrology, adhesives, or electronics packaging Proficiency in Solidworks or equivalent CAD software (preferred) Experience with MS Project, Visio, and other project management tools (preferred) Experience with manufacturing database, controls, and vision (preferred) Experience with Altium or other electronics design software (preferred) Role model for what kindness looks like. Actively levels up those on the team through example setting, guidance, and support. Empowers others to make effective decisions Excels at identifying solutions to accelerate team's learning of the problem space Strong organizational planning and ability to hold others accountable. Breaks down silos within and across teams to ensure forward progress and collective success Ability to take decisive action and deliver tangible results in a cross-functional organization. Leadership aptitude of teams, projects, and programs Working Conditions General Office, Laboratory, and Cleanroom environments Expected travel less than 10% Physical Requirements While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, see, talk or hear in a standard office environment. Employee may occasionally lift/or move up to 15 pounds. BENEFITS Medical, dental, vision, health savings account, flexible spending account, life and long-term disability insurance, 401(k) plan, holidays, and PTO. At Biolinq we fully subscribe to the principles of Equal Employment Opportunity. It is our policy to provide employment, compensation, and other benefits related to employment based on qualifications, without regard to race, color, religion, national origin, age, sex, veteran status, genetic information, disability, or any other basis prohibited by federal, state or local law. In accordance with requirements of the Americans with Disabilities Act and applicable federal, state and/or local laws, it is our policy to provide reasonable accommodation upon request during the application process to applicants in order that they may be given a full and fair opportunity to be considered for employment. As an Equal Opportunity Employer, we intend to comply fully with applicable federal, state and/or local employment laws and the information requested on this application will only be used for purposes consistent with those laws. To the extent required by applicable law, The Company maintains a smoke- free workplace. As part of our efforts to ensure fair and equal pay based on merit, Biolinq supports pay transparency internally and during the recruitment process. The U.S. base salary range reasonably expected to be paid for this role is: $125,000 to $145,000. We may ultimately pay more or less than the posted range. Actual compensation packages are based on a variety of factors that are unique to each candidate including, but not limited to: skill set, depth of experience, education, certifications, and specific work location. The range displayed reflects the minimum and maximum target for new hire salaries for the job across the U.S. The total compensation package for this position may also include an annual performance bonus and/or other applicable incentive compensation plans. Biolinq also offers a comprehensive package of benefits including paid time off (vacation, holidays, sick time, parental leave), medical/dental/vision insurance, and 401(k) to eligible employees, subject to the terms and conditions of the applicable plans and any written agreement between the parties. Your recruiter can share more about the total compensation package during the hiring process. Please note: The information contained herein is not intended to be an all-inclusive list of duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Biolinq Talent Acquisition at ******************* Salary Description $125,000-$145,000 per year

The Applications Engineer is responsible for providing technical expertise, process development, and customer support related to industrial machinery. This role bridges engineering, sales, and service by demonstrating machine capabilities, optimizing cutting parameters, and ensuring customers achieve maximum value from their laser systems. Primary Responsibilities: Develop and optimize laser cutting parameters for various metals and material thickness. Conduct machine demonstrations, trials, and proof of concept test for prospective customers. Troubleshoot cutting quality and process issues. Provide on-site and remote training to customers on machine operation, maintenance, and process optimization. Develop and document cutting process databases, application notes, and best practice guides. Secondary Responsibilities: Support installation and commissioning at customer sites as needed Prepare technical documentation, cutting samples, and reports for customer presentations Support trade shows, open houses, and industry events with live demonstration and technical expertise Assist in product development by relating customer and application insights to R&D Position Requirements: Bachelor's degree in mechanical or manufacturing engineering, Materials Science, or a related technical field (Equivalent experience may be considered) 5+ Years of experience in laser processing, CNC machinery, or precision metal fabrication Hands-on experience with fiber laser products highly preferred Knowledge of motion controls systems, optics, and materials sciences is a plus Familiarity with CAD/CAM software Travel requirement is 25% HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

About Balt Our purpose is to improve the lives of 150,000 patients in 2026. Our story Balt is a rapidly growing pioneer in an exceptional field. For 45 years, Balt has been leading the way - collaborating with physicians and institutions to develop elegant medical devices. Our products are being used by physicians across the world, and we have 13 offices in 11 countries - and counting. We introduced one of the first neurovascular intervention devices in 1977 and now offer the world's broadest portfolio of medical devices for stroke. As the premier global neurovascular platform always seeking to expand beyond boundaries, we are now bringing our innovation to the peripheral vascular space. We are proud of our mission, our people, and the incredible work we accomplish together as we empower physicians to save lives. Why Join Balt? Join a passionate team, dedicated to making a difference. Working at Balt means giving meaning to your work! Pride is a strong part of our identity. We are a close-knit team, with strong mission, vision and values that guide our day-to-day. Recognition of work, respect, and our multicultural community are key aspects of the employee experience and contribute to our continued success. No matter the country, we take care of you. Would you like to be part of our story? Don't hesitate, come and join us! About this opportunity - Quality Engineer II Description The Operations Quality Engineer II will be responsible for supporting production quality, the transfer of neurovascular products to the production environment, and supplier quality activities. This engineer will be expected to work directly with production and suppliers while being provided moderate levels of support/guidance from other engineers and their manager to complete tasks. This position will have the responsibility to support and continuously improve current manufacturing and supplier quality processes through technical and process innovation for the manufacture of neurovascular medical devices that save patient lives. Job Responsibilities Daily tasks: Production support of existing products/processes and sustaining work Support the manufacturing organization to facilitate efficient operations, optimize existing processes, and ensure that production goals are met. Develop process and procedure updates for increased efficiency, quality, and productivity. Work with Manufacturing Engineering to correct equipment problems or process parameters that produce non-conforming products, low yields, or product quality issues. Analyzes nonconforming product, process, and material issues supported by use of root cause tools to drive corrective actions. Own NCMR and CAPA investigations and corrections/corrective actions Support requests for new supplier onboarding and offboarding Complete tasks related to supplier changes and management of existing suppliers Spend significant portions of time in the production environment. Work closely with production operators and Quality Control inspectors in the production environment. Provide feedback to Quality, Operations, Engineering and R&D on quality issues. Detail oriented review and approval documentation in support of production and process improvement Additional Tasks: Development project work - design transfer, commercialization of new products, and site manufacturing transfers Interface with New Product Development team in design control projects to integrate new products or processes into the existing manufacturing area. Process development, validation and verification work is required - knowledge of Process Validation Plans, IQ, OQ, PQ, software validation, test method validation/gage R&R, a clear understanding of FDA's QMSR and cGMP, and a good understanding in the application of statistics to process analysis and improvement. Communicate with suppliers to address quality concerns and resolves issues. Maintain and develop processes and procedures by writing standard work instructions for operations involved with production and quality. Qualification Requirements Bachelor's degreerequired, preferably in engineering or science discipline. 2+ years as an Engineer in a related field. Medical device or pharmaceutical experience. Process and Equipment qualification knowledge. Statistical analysis skill set. Highly Desired Qualifications Class II and III implantable medical device experience with focus on neurovascular devices. Experience creating and implementing new production line layouts. Minitab proficiency. Strong background in medical device components using metals, plastics, extrusion, and/or adhesives. A demonstrated ability to plan and run projects. Skills Required: Keen attention to detail when reviewing documentation and processes. Solid technical writing ability Comfortable working independently and cross-functionally as part of a team. Comfortable communicating with a wide range of people (production, regulatory, management, suppliers, and others) General understanding of Risk Management, including design, use, and process FMEAs as well as a basic understanding of Severity, Occurrence, and Risk Mitigation and their impact on product/process controls. General understanding of Process Validation (OQ/PQ) and ability to develop test protocols/report to meet FDA and ISO requirements for class II and class III devices. General understanding of CAPA process and root cause analysis tools and how to use them Ability to develop/draft manufacturing documentation (Manufacturing Procedures, Engineering Drawings, BOM, Work Orders). General familiarity with design control requirements and V&V testing for new product designs. Effectiveness with lab equipment, assembly tools, and measurement devices. Basic understanding of statistical analysis techniques for identifying process capability and equivalence testing. Development and qualification of tooling/ equipment (IQ/OQ, support, design). Knowledge of computer applications (i.e.: Microsoft Project, Word, Excel, PowerPoint, Windows, Visio, etc.) required. Highly Desired Qualifications: Experience with catheters, coils, or stents device manufacturing processes and equipment. Test Method Validation and/or Measurement System Analysis experience, including Gage R&Rs and Attribute Agreement analysis Process background (development, capability, optimization, validation) within the medical device industry. Equipment and tooling design and optimization using DFM and Six Sigma principles. Leading project teams tasked with new product/process development and the successful transfer into manufacturing. Knowledge to develop and improve manufacturing processes from concept to commercialization including characterization, validation and cost/capacity analysis. Application of statistical and analytical methods for process development, optimization and control such as SPC, SQC, and DOE. Knowledge of SolidWorks for both part and fixturing/equipment design. Work Environment Working conditions are normal for an office environment. Extended computer usage. Standard PPE gowning requirement for cleanroom activities is required. Moderate lifting Extended periods of walking or standing Microscope usage The above information on this description have been designed to indicate the general nature of work performed by employees within this position. It is not a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Balt Group is an Equal Employment Opportunity employer. More information please go to ***************** Please be aware of a current job offer scam perpetrated through the use of the internet. The scammers frequently misappropriate and use a company's log and photos to give the appearance of legitimacy. The scam preys upon those seeking employment and uses false and fraudulent offers of employment with employers, such as Balt Inc to steal from the victims. Balt believes that one of the best ways to put a stop to this scam is to make sure you are aware of it. Balt's job recruitment process involves live communication: in person, telephone, and/or video interviews in most cases. #LI-FW1 Pay Range $85,000-$95,000 USD

We're looking for a hands-on, curious, and driven Manufacturing Engineer Intern to join our team! This internship offers a unique opportunity to gain real-world experience by working both in an office setting and directly on the production floor. You'll play a keyrole in identifying inefficiencies, improving processes, and supporting continuous improvement initiatives that drive productivity and quality. What You'll Do: Collaborate with engineers and production staff to analyze current manufacturing processes Identify opportunities for process improvements and assist in implementing solutions Collect and analyze data to support efficiency and workflow enhancements Assist in the design and layout of workstations, tools, and equipment Document standard operating procedures and best practices Support ongoing lean manufacturing and continuous improvement projects Participate in cross-functional team meetings and contribute ideas Requirements Currently pursuing a degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field Strong analytical and problem-solving skills Comfortable working in both office and production environments Excellent communication and teamwork abilities Proficiency in Microsoft Office; experience with CAD or data analysis tools is a plus Eagerness to learn and contribute in a fast-paced, hands-on environment Why Join Us? Gain valuable, real-world engineering experience Work on meaningful projects that make a tangible impact Learn from experienced professionals in both engineering and manufacturing Be part of a supportive and innovative team BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

About Us: BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping our clients realize their most critical goals from Strategy to Commercialization. As the only firm born from a manufacturing technology company to become an independent and fully integrated firm, we combine deep domain expertise in the manufacturing environment with an approach that is built to serve the dynamic needs of our clients. Rooted in our distinct culture of Truly Human Leadership, we cultivate the leaders who will define tomorrow and partner with our clients in the food & beverage, life sciences, industrial, and advanced technology industries to build the future of manufacturing and technology. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: Who You'll Work With You will join one of our 45 offices in the US, be part of a committed team of over 1500 professionals, and work in teams and directly with our clients doing work that is shaping the world around us. You will be welcomed into a rapidly growing business and team and empowered to make an impact. You will be valued, cared for, and challenged on your path to becoming a world-class professional consultant and surrounded by leaders who are committed to creating an environment that enables you to realize your own success and fulfillment. When you join Design Group as a Process Engineer, you are joining a team that will challenge you and position you for growth. In this role, you will work with a team of industry experts to help the world's leading companies solve their most difficult problems. You will join our Architecture/Engineering Process Practice and partner with seasoned leaders, technical specialists, and subject matter experts to deliver the highest quality solutions to our clients with consistency and accuracy. What You'll Do You'll work individually and in teams to support capital projects and implement solutions for our clients. Together, you will help our clients make critical changes to improve their performance and realize their most important goals. * Assume responsibility for process mechanical design, process equipment and installation specifications, vendor and contractor management, and installation and start-up support * Maintain and grow solid client relationships * Develop process flow diagrams and process & instrument diagrams (P&IDs) * Create specifications for process equipment procurement and installation * Create basic piping system design, pump sizing calculations, mass & energy balance calculations, and functional & installation specifications * Manage project documentation * Lead project teams and coordinate with multidisciplinary project teams * Supervise designers and junior level engineers * Handle equipment procurement and develop material handling methods * Manage vendors and contractors * Provide installation and start-up support * Troubleshoot equipment problems What You'll Bring * A minimum of five years of industrial project engineering experience involving process and related automation applications * Experience in the food, dairy, beverage/brewery, or personal care industries (preferred) * Strong analytical skills and a basic understanding of project management fundamentals * Proficiency in Microsoft Office, Microsoft Project, and Revit * Effective organizational, communication, and interpersonal skills * A solid understanding of process flow diagrams, piping & instrument diagrams, mass & heat balances, basic piping system design, pump sizing, material handling methods, equipment, functional & installation specifications, and process instrumentation & control principles * A practical understanding of sanitary design and construction methods, and process electrical/control and instrumentation design integration (preferred) * The ability to work with minimal supervision * A willingness to travel for project requirements including installation and start-up activities, client and company sponsored meetings, trainings, industry related seminars, forums, and conventions * A bachelor of science in mechanical or chemical engineering, or a similar engineering degree with applicable project experience Our culture and commitment to our people is what sets us apart. We foster an environment of mutual respect, integrity, and unconditional interest in the individual and collective success of our professionals. Our model and entrepreneurial mindset offer a rewarding, challenging, and highly flexible path. As a Process Engineer, you will build a meaningful and fulfilling career with the support of professional development resources and mentorships including our First Year Experience program, Individual Development Plans, and Career Path resources and tools. You will be surrounded by exceptional talent who will support your development as both a world-class engineer and a highly effective leader. Feel like you're on the path to becoming a Process Engineer but you're not quite there yet? We'd love to connect with you to see if we can take you from where you are today and grow you into a Design Group Engineering Consultant. The approximate pay range for this position is $80,000-$110,00. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. #LI-TT At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Design Group

Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our employees make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Together, We'll Keep the World Moving Forward. Not everyone knows what Timken makes. But you'll recognize what we make possible. Timken engineers solutions that keep the world moving by offering products and services to keep the world's equipment, machinery and vehicles in motion. Everywhere from NASCAR to NASA. Position Summary: We have an opportunity at our Montgomery, IL location for a Manufacturing Engineering Technician. This role specifies and develops operational sequences and manufacturing methods to ensure safe, efficient, and cost-effective production. This role provides technical support to internal and external customers, supports CNC machines with programming, troubleshooting, and DNC library management, and collaborates across disciplines to optimize part manufacturability and process reliability What We Offer: The annual salary range for this position is $50,000 - $65,000 based on experience. Comprehensive benefits package, including medical, dental and vision coverage. Benefits start on first day of employment. 401(k) retirement savings plan with generous company match. 10 paid holidays per year plus paid vacation. Paid parental leave at one year of service. Employee discounts on products and services. Education expense reimbursement, eligible to apply at first day of employment. Opportunities for professional development and career growth. Essential Responsibilities: Partner with product engineers to develop part configurations that are manufacturable and cost-effective. Work with the quoting department to define and review process steps, tooling needs, and cycle times to produce accurate costing for new and existing parts. Act as a liaison with suppliers to ensure reliability and cost effectiveness of outsourced processes. Develop, review, and maintain routings and process documentation regularly to ensure process efficiency and effectiveness. Collaborate with manufacturing engineering and production teams to develop and refine CNC programs for new parts using best-practice, efficient programming techniques. Review and maintain existing CNC programs and DNC library management to ensure up-to-date, efficient program usage. Troubleshoot CNC programs, setups, and tooling; support and train production personnel as needed. Use CAD/CAM modeling software to perform analysis, generate layouts, and support programming and fixturing. Develop or review process steps for sales order checklists to support accurate order processing and manufacturing readiness. Develop, review, and troubleshoot manufacturing processes, setups, fixtures, and cycle times; provide training and production floor support. Evaluate, recommend, and test machinery and equipment for process implementation and capability improvements. Determine rework methods to salvage non-conforming parts and minimize scrap. Perform analysis and layout designs using engineering design software; assist with design and fabrication of prototype parts Basic Qualifications: High school diploma or equivalent. Preferred associate degree or technical diploma in Manufacturing Technology, Mechanical Engineering Technology, or related field. At least 5 years of experience in machining processes, tooling, fixtures, and machining best practices. Proven experience supporting CNC machining operations, including programming (CAM), troubleshooting, and DNC library management Able to read and interpret engineering drawings and customer specifications; proficient with CAD and internal software systems. Self-accountability to meet deadlines. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law. Timken is a global technology leader in engineered bearings and industrial motion. Our expanding portfolio of next-generation solutions helps customers around the world improve efficiency, solve their toughest challenges, and push the boundaries of performance. We employ 19,000 people globally, operate from 45 countries, and posted $4.6 billion in sales in 2024. We have been recognized as one of America's Most Responsible Companies 5x by Newsweek and one of the World's Most Ethical Companies 14x by Ethisphere. Why Choose Timken? Over a century of knowledge and innovation A culture of top performance A global, diverse environment Products that contribute to a sustainable world A conviction to improve communities around us Competitive salary and benefits Not Ready To Apply? Stay connected by joining our network and we'll keep you informed about upcoming events and opportunities that match your interests. Talent CommunityRequiredPreferredJob Industries Other

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world's most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit *********** Summary of Role: GlobalFoundries (GF) seeks a leader with proven expertise in Silicon Photonics active and passive device simulation, design, fabrication and test. The role involves coordinating qualifications of new photonic devices across integration, reliability, modeling and test teams. There will also be customer support to guide solutions and debug/root cause technology vs. design challenges. Essential Responsibilities: Responsible for leading complex development of passive and active silicon photonics device components to meet customer and technology requirements Simulate, design and coordinate testing of new silicon photonic devices Plan, coordinate, and document qualification of new photonic devices Identify issues and technical challenges, formulate appropriate experiments to understand root cause and improve processes to meet requirements Interface and support customers to evaluate new and upcoming solutions Interface with customers to debug and root cause technology vs. design challenges Other Responsibilities: Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs Travel Required Qualifications: Education -BS and above. Electrical/Optical Engineering or related field. Bachelor of Science (B.S.) or equivalent degree in Electrical Engineering, Material Science, Photonics or a related field from an accredited university. Additional professional experience in advanced photonic device design, integration, test and/or advanced packaging: BS + 6-7 years of experience or MS + 5-6 years or PhD + 3-4 years Skills: Familiarity with Silicon photonic device simulation, design, and test. Strong communication and coordination skills cross the department and cross-organizationally. Strong team collaborator across multiple geographical locations & proactive mindset. Fluency in English Language - written & verbal Preferred Qualifications: Silicon Photonic design experience using GF PDK Silicon Photonic simulation experience Project management skills - i.e., the ability to innovate and execute solutions that matter; the ability to navigate ambiguity and communicate and track projects through to completion. Strong written and verbal communication skills. Strong planning & organizational skills. For Awareness Only - the below is our Equal Opportunity Statement (2023) that Workday will automatically populate in every external job description. The Hiring Manager only needs to provide the above pieces of information. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law. Expected Salary Range $94,300.00 - $175,100.00 The exact Salary will be determined based on qualifications, experience and location. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law

The Asahi Kasei Group operates with a commitment of creating for tomorrow. Our business sectors, Material, Homes, and Health Care, contribute to the development of society by anticipating the changing needs of those around the world. We look for candidates that offer a fresh perspective and a variety of skills to help us achieve our commitment.Bionova is a rapidly growing, biologics CDMO focused on developing and manufacturing recombinant protein products using mammalian cell culture processes. Our business success is built on bringing together top scientific talent, arming them with the best available tools, and setting them loose in an agile, energized culture focused on solving difficult client problems. Because our success depends on our ability to exceed our clients' expectations, we look for candidates with an innate desire to serve. Adaptability and an interest in transformative action are also common attributes among our team. Bionova became a subsidiary of Asahi Kasei Medical in May 2022, a division of Tokyo-based Asahi Kasei Group. This acquisition has enabled Bionova to greatly accelerate growth of the business, both in capacity of current service offerings and expansion into new service offerings. Company: Bionova Scientific LLC Job Description: Company Summary: Bionova is a rapidly growing, biologics CDMO focused on developing and manufacturing recombinant protein products using mammalian cell culture processes. Our business success is built on bringing together top scientific talent, arming them with the best available tools, and setting them loose in an agile, energized culture focused on solving difficult client problems. Because our success depends on our ability to exceed our clients' expectations, we look for candidates with an innate desire to serve. Adaptability and an interest in transformative action are also common attributes among our team. Position Summary: The Manufacturing Bioprocess Engineer - Downstream is a front-line Subject Matter Expert (SME) responsible for the operational execution of Bionova's downstream bioprocesses, including chromatography, filtration (depth, TFF, virus filtration), and formulation activities. This role ensures consistent delivery of GMP-compliant drug substance through deviation ownership, process troubleshooting, and continuous improvement. The BPS works closely with manufacturing staff and cross-functional teams to mature Bionova's purification processes and drive reliable supply. Essential Duties and Responsibilities: Operational Support Act as SME for downstream operations (column packing, chromatography, UF/DF, filtration, pooling, and formulation). Provide technical guidance and floor support for real-time issue resolution. Monitor process data and control parameters to ensure consistent product quality. Material management and coordination with Supply Chain. Deviation & Change Management Investigate, manage, and own downstream-related deviations in the Quality Management System. Perform root cause analysis and implement effective CAPAs. Manage downstream-related change controls and ensure successful implementation. Training & Knowledge Transfer Develop and deliver training on chromatography, filtration, and purification workflows. Mentor operators on column packing techniques, skid operation, and GMP compliance. Ensure robust documentation of training activities. Support MSAT with technology transfer. Continuous Improvement Identify and implement process improvements to increase yield, robustness, and efficiency in downstream operations. Apply Lean/Six Sigma tools to optimize workflows and reduce variability. Compliance & Documentation Author, revise, and review downstream SOPs, Electronic batch records, and work instructions. Ensure readiness for audits by maintaining GMP compliance across upstream operations. Working Conditions: This position required to work in a lab/office setting. The role requires walking, standing, stooping, kneeling, and crouching. The employee must occasionally lift and or move up to 20 pounds independently. Qualifications Education & Experience BA/BS in Biological Science, Biotechnology, or Biochemical Engineering with 4 years' experience in upstream pharmaceutical manufacturing; OR MS with 2 years' experience in GMP upstream operations. Required Qualifications Hands-on experience with purification unit operations (chromatography, filtration, UF/DF). Knowledge of process automation platforms (e.g., Unicorn, DeltaV). Familiarity with biochemical principles underlying protein purification. Knowledge of process automation and single-use technologies. Familiarity with scientific principles driving biologics production. Strong deviation ownership, CAPA development, and technical writing skills. Ability to troubleshoot complex downstream issues and coach others effectively. Strong problem-solving and facilitation skills. Experience in training/mentoring operators in GMP downstream processes. Project management or Operational Excellence/Six Sigma background. Compensation Range: The base compensation range for this role is between $80,000 and $90,000. However, the actual compensation may vary depending on your experience and qualifications. Health Benefits and Program: Bionova offers health benefits at a subsidized rate. Healthcare, Dental, and Vision insurance Life Insurance and Disability Program: 100% covered by Bionova. Retirement Plan (401K) Up to 8% of Employer Match Paid time off up to two weeks 10 days of Holidays and 5 days of Sick Leave. As an equal opportunity employer, Asahi Kasei believes a diverse workforce will provide us with the ability to continuously support the changes in the economy, society, and environment.