Laboratory engineer job description
Updated March 14, 2024
6 min read
Find better candidates in less time
Post a job on Zippia and take the best from over 7 million monthly job seekers.
Example laboratory engineer requirements on a job description
Laboratory engineer requirements can be divided into technical requirements and required soft skills. The lists below show the most common requirements included in laboratory engineer job postings.
Sample laboratory engineer requirements
- Bachelor's degree in Engineering, Chemistry, or related field
- Experience working in a laboratory environment
- Knowledge of laboratory safety procedures and protocols
- Ability to operate and maintain laboratory equipment
- Proficient in data analysis and reporting
Sample required laboratory engineer soft skills
- Strong problem-solving skills
- Excellent communication and interpersonal skills
- Ability to work independently and as part of a team
- Detail-oriented with strong organizational skills
- Flexibility and adaptability to changing priorities and procedures
Laboratory engineer job description example 1
Massachusetts Institute of Technology laboratory engineer job description
+ Department: Plasma Science and Fusion Center
+ School Area: VP Research
+ Employment Type: Full-Time
+ Employment Category: Exempt
+ Visa Sponsorship Available: No
+ Schedule:
Email a Friend Save Save Apply Now
Information on MIT's COVID-19 vaccination requirement can be found at the bottom of this posting.
ACCELERATOR LABORATORY ENGINEER, Plasma Science and Fusion Center, to maintain, upgrade, and operate scientific and engineering equipment (e.g., ion accelerators, neutron generators, linear plasma devices and ancillary systems) located in the NW13 accelerator laboratories (and related equipment in PSFC laboratories); and operate scientific equipment (e.g. tensile testers, furnaces, SEM, EDX machines, etc.) in associated PSFC laboratories. There are three accelerators, two neutron generators, and one linear plasma device that will be directly maintained and operated. The NW13 accelerator laboratories will be utilized by ~20 scientific users (faculty, scientists, students) and responsibilities will include coordinating their accelerator time; training them as needed; and assisting in the design, building, and operating of their experiments. Will also provide safety training and oversee the functioning and safety of the laboratories. There will be significant decision-making on the day-to-day level in the execution of these responsibilities, and while there will be long-term direction from faculty and research scientists, the person in this role will be expected to independently and proactively identify and solve technical issues within the laboratory to ensure smooth scientific operations.
Job Requirements
REQUIRED: a minimum of a master's degree in mechanical or electrical engineering or closely related field; at least five years' experience working with complex mechanical and/or scientific equipment; experience with computer-aided design (CAD) software (e.g., SolidWorks) and finite-element analysis (e.g., COMSOL); hands-on experience with mechanical fabrication and assembly of mechanical and/or electrical systems; and ability to demonstrate working knowledge of relevant tools, equipment, and safety procedures involved in work with ion accelerators and related equipment. PREFERRED: expert-level knowledge of the equipment described is strongly preferred. Job #21542Working conditions: lifting weights of up to 50 pounds, standing for extended periods, and working in confined spaces.7/11/22
+ School Area: VP Research
+ Employment Type: Full-Time
+ Employment Category: Exempt
+ Visa Sponsorship Available: No
+ Schedule:
Email a Friend Save Save Apply Now
Information on MIT's COVID-19 vaccination requirement can be found at the bottom of this posting.
ACCELERATOR LABORATORY ENGINEER, Plasma Science and Fusion Center, to maintain, upgrade, and operate scientific and engineering equipment (e.g., ion accelerators, neutron generators, linear plasma devices and ancillary systems) located in the NW13 accelerator laboratories (and related equipment in PSFC laboratories); and operate scientific equipment (e.g. tensile testers, furnaces, SEM, EDX machines, etc.) in associated PSFC laboratories. There are three accelerators, two neutron generators, and one linear plasma device that will be directly maintained and operated. The NW13 accelerator laboratories will be utilized by ~20 scientific users (faculty, scientists, students) and responsibilities will include coordinating their accelerator time; training them as needed; and assisting in the design, building, and operating of their experiments. Will also provide safety training and oversee the functioning and safety of the laboratories. There will be significant decision-making on the day-to-day level in the execution of these responsibilities, and while there will be long-term direction from faculty and research scientists, the person in this role will be expected to independently and proactively identify and solve technical issues within the laboratory to ensure smooth scientific operations.
Job Requirements
REQUIRED: a minimum of a master's degree in mechanical or electrical engineering or closely related field; at least five years' experience working with complex mechanical and/or scientific equipment; experience with computer-aided design (CAD) software (e.g., SolidWorks) and finite-element analysis (e.g., COMSOL); hands-on experience with mechanical fabrication and assembly of mechanical and/or electrical systems; and ability to demonstrate working knowledge of relevant tools, equipment, and safety procedures involved in work with ion accelerators and related equipment. PREFERRED: expert-level knowledge of the equipment described is strongly preferred. Job #21542Working conditions: lifting weights of up to 50 pounds, standing for extended periods, and working in confined spaces.7/11/22
Post a job for free, promote it for a fee
Laboratory engineer job description example 2
ICONMA laboratory engineer job description
+ he Mechanical Properties Lab Engineer will coordinate all the activities within the lab.
+ The candidate will need to lead a team of three SBU Lab Technicians in the Mechanical Properties Lab, establishing workflow and work distribution guidelines.
+ This will entail reviewing and logging in incoming work and assuring the quality of the lab output.
+ The engineer will train the lab personnel on testing techniques and reviewing their aptitude on a regular basis.
+ The candidate will also need to coordinate calibration of the equipment and keep records to prove routine verifications of this calibration.
+ The candidate must have a thorough understanding of metals, and a basic understanding of polymers.
+ They should enjoy working with their hands in a lab environment.
+ They should be able to apply their knowledge to suggest testing methods and fixturing, for the testing of materials.
+ The engineer will coordinate with the machine shop to produce test specimens and test fixtures and act as the liaison between the lab and the Materials & Sustainability Engineering community.
Requirements
+ Bachelor of Science degree in Material Science & Engineering, Metallurgical Engineering, Mechanical Engineering or Polymer Engineering from an ABET Accredited University.
+ 0 to 5 years of experience working in a materials engineering lab performing Rockwell hardness, Brinell hardness, durometer testing, tensile and compression testing, scratch/mar testing, abrasion testing, torsion testing, impact testing, and micro-hardness testing.
+ They should understand ASTM and ISO testing methods for the mechanical testing of materials.
+ The candidate should have good communication skills, with excellent technical writing skills and clear spoken English.
+ The understanding of Microsoft Office Suite software is a must.
+ Be able to run the equipment listed in the qualifications.
+ Years of experience- 0 to 10
Preferred Qualifications:
+ Master of Science or PhD degree in Material Science & Engineering, Metallurgical Engineering, Mechanical Engineering or Polymer - Engineering from an ABET Accredited University.
+ Knowledge of other testing techniques, such as scanning electron microscopy and metallography is considered a plus.
+ Utilization of these skills will be employed as a secondary function.
As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.
+ The candidate will need to lead a team of three SBU Lab Technicians in the Mechanical Properties Lab, establishing workflow and work distribution guidelines.
+ This will entail reviewing and logging in incoming work and assuring the quality of the lab output.
+ The engineer will train the lab personnel on testing techniques and reviewing their aptitude on a regular basis.
+ The candidate will also need to coordinate calibration of the equipment and keep records to prove routine verifications of this calibration.
+ The candidate must have a thorough understanding of metals, and a basic understanding of polymers.
+ They should enjoy working with their hands in a lab environment.
+ They should be able to apply their knowledge to suggest testing methods and fixturing, for the testing of materials.
+ The engineer will coordinate with the machine shop to produce test specimens and test fixtures and act as the liaison between the lab and the Materials & Sustainability Engineering community.
Requirements
+ Bachelor of Science degree in Material Science & Engineering, Metallurgical Engineering, Mechanical Engineering or Polymer Engineering from an ABET Accredited University.
+ 0 to 5 years of experience working in a materials engineering lab performing Rockwell hardness, Brinell hardness, durometer testing, tensile and compression testing, scratch/mar testing, abrasion testing, torsion testing, impact testing, and micro-hardness testing.
+ They should understand ASTM and ISO testing methods for the mechanical testing of materials.
+ The candidate should have good communication skills, with excellent technical writing skills and clear spoken English.
+ The understanding of Microsoft Office Suite software is a must.
+ Be able to run the equipment listed in the qualifications.
+ Years of experience- 0 to 10
Preferred Qualifications:
+ Master of Science or PhD degree in Material Science & Engineering, Metallurgical Engineering, Mechanical Engineering or Polymer - Engineering from an ABET Accredited University.
+ Knowledge of other testing techniques, such as scanning electron microscopy and metallography is considered a plus.
+ Utilization of these skills will be employed as a secondary function.
As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.
Dealing with hard-to-fill positions? Let us help.
Laboratory engineer job description example 3
Foundation Medicine laboratory engineer job description
About the Job
The Tech Ops Engineer is part of the Technology Operations and Digital Lab Innovation team responsible for maintaining laboratory systems supporting the clinical assays that will power the future of oncology testing through Comprehensive Genomic Profiling at Foundation Medicine. The scientists and engineers in the group collaborate on projects with cross-functional teams in a matrix organization to continuously improve the efficiency and effectiveness of our new and existing automated laboratory software and processes.
This is a regulated position and additional information may be available from QA on the qualifications for this role pertaining to regulatory guidelines.
Regular onsite work at a designated FMI location is an essential function of this role.
Key Responsibilities
* Provide on-site support of lab platforms.
* Perform routine preventative maintenance on automated instrumentation, software and coordinate service visits from third-party support engineers as needed.
* Perform maintenance, metrology, and calibration efforts for the laboratory, including planned and unplanned maintenance.
* Collect, collate, and report on data pertaining to platform reliability and instrument/software downtime.
* Monitor instrument/software performance and suggest efficiency improvements.
* Perform the above responsibilities during normal assigned working hours with flexibility to work off-hours and/or weekend hours as needed based on variances in lab schedule and end-user demands.
* Other duties as periodically assigned.
Qualifications
Basic Qualifications
* Bachelor's Degree in the life sciences computer science, bioengineering or biotechnology, engineering, or related disciplines
* 2+ years of experience working with automated laboratory systems (software and hardware) in a life sciences, anatomic or clinical pathology, bioengineering or biotechnology, pharmaceutical, engineering, field service, or diagnostic laboratory setting
Preferred Qualifications
* 4+ years of experience working with automated laboratory systems (software and hardware) in a life sciences, bioengineering or biotechnology, pharmaceutical, engineering, field service, or diagnostic laboratory setting
* Experience working in a regulated environment (e.g. FDA, QSR, EU, CLIA, CAP, GxP, ISO, etc.)
* Experience in using enterprise level software systems including IBM Maximo, MasterControl, Git,
* Confluence, JIRA, SmartSheet, and SharePoint
* Familiarity with VBscript, Python, PERL and/or JavaScript, relational databases, SQL, LIMS, or other relevant enterprise software packages
* Technical support and/or customer service experience with the associated patience, courtesy, and diplomacy
* Previous teaching or technical training experience
* Knowledge of safety protocols in workshop, factory, or laboratory setting
* Demonstrated ability to document and report troubleshooting procedures and resolutions
* Demonstrated ability to work as an individual as well as in a team environment
* Excellent attention to detail with the ability to communicate effectively and work cross-functionally
* Understanding of HIPAA and the importance of patient data privacy
* Commitment to reflect FMI's values: patients, passion, innovation, and collaboration
#Hybrid
The Tech Ops Engineer is part of the Technology Operations and Digital Lab Innovation team responsible for maintaining laboratory systems supporting the clinical assays that will power the future of oncology testing through Comprehensive Genomic Profiling at Foundation Medicine. The scientists and engineers in the group collaborate on projects with cross-functional teams in a matrix organization to continuously improve the efficiency and effectiveness of our new and existing automated laboratory software and processes.
This is a regulated position and additional information may be available from QA on the qualifications for this role pertaining to regulatory guidelines.
Regular onsite work at a designated FMI location is an essential function of this role.
Key Responsibilities
* Provide on-site support of lab platforms.
* Perform routine preventative maintenance on automated instrumentation, software and coordinate service visits from third-party support engineers as needed.
* Perform maintenance, metrology, and calibration efforts for the laboratory, including planned and unplanned maintenance.
* Collect, collate, and report on data pertaining to platform reliability and instrument/software downtime.
* Monitor instrument/software performance and suggest efficiency improvements.
* Perform the above responsibilities during normal assigned working hours with flexibility to work off-hours and/or weekend hours as needed based on variances in lab schedule and end-user demands.
* Other duties as periodically assigned.
Qualifications
Basic Qualifications
* Bachelor's Degree in the life sciences computer science, bioengineering or biotechnology, engineering, or related disciplines
* 2+ years of experience working with automated laboratory systems (software and hardware) in a life sciences, anatomic or clinical pathology, bioengineering or biotechnology, pharmaceutical, engineering, field service, or diagnostic laboratory setting
Preferred Qualifications
* 4+ years of experience working with automated laboratory systems (software and hardware) in a life sciences, bioengineering or biotechnology, pharmaceutical, engineering, field service, or diagnostic laboratory setting
* Experience working in a regulated environment (e.g. FDA, QSR, EU, CLIA, CAP, GxP, ISO, etc.)
* Experience in using enterprise level software systems including IBM Maximo, MasterControl, Git,
* Confluence, JIRA, SmartSheet, and SharePoint
* Familiarity with VBscript, Python, PERL and/or JavaScript, relational databases, SQL, LIMS, or other relevant enterprise software packages
* Technical support and/or customer service experience with the associated patience, courtesy, and diplomacy
* Previous teaching or technical training experience
* Knowledge of safety protocols in workshop, factory, or laboratory setting
* Demonstrated ability to document and report troubleshooting procedures and resolutions
* Demonstrated ability to work as an individual as well as in a team environment
* Excellent attention to detail with the ability to communicate effectively and work cross-functionally
* Understanding of HIPAA and the importance of patient data privacy
* Commitment to reflect FMI's values: patients, passion, innovation, and collaboration
#Hybrid
Start connecting with qualified job seekers
Resources for employers posting laboratory engineer jobs
Average cost of hiring
Recruitment statistics
How to write a job description
Examples of work conditions
Laboratory engineer job description FAQs
Ready to start hiring?
Updated March 14, 2024
Updated March 14, 2024