Laboratory technician jobs in Killeen, TX - 96 jobs

MEDICAL LABORATORY TECHNOLOGIST/CLINICAL LABORATORY SCIENTIST (MLT, CLS) VA - TEMPLE, TEXAS ABOUT US: Laredo Technical Services, Inc. provides staffing services to federal Government agencies all over the world. LTSI connects the right opportunities to the right people. With our experience in placing our Team Members throughout the United States and overseas, we excel at providing experienced, professional personnel for a wide range of Professional and Office Administration as well as Medical services. Our goal is to provide the highest quality of professionals in the industry. LTSI's culture delivers a strong work ethic while going above and beyond with a sense of urgency. We are the employee-driven company. We strive for excellence every day, which is what sets us apart from all the other government contractors. Our strong work ethic, sense of urgency and commitment to going above and beyond for our clients is what we value most! As a Certified Service-Disabled Veteran Owned Small Business (SDVOSB) Minority Business Enterprise (MBE) that provides a broad range of administrative, project management, and medical staffing support services, we are also honored to be a Member of the Military Spouse Employment Partnership (MSEP), and we encourage military spouses to apply for any of our positions for which they feel they are qualified. JOB TITLE: Medical Laboratory Technologist/Clinical Laboratory Scientist (MLT/ CLS) GOVERNMENT AGENCY & LOCATION: Department of Veterans Affairs (VA) Central Texas Veterans Health Care System Building 163 1901 Veterans Memorial Drive Temple, Texas 76502 POSITION INFORMATION: Must possess comprehensive knowledge of professional Medical Technology, Clinical Laboratory Science, Medical Laboratory Technician principles, practices, concepts, and theories providing for sound independent work Must possess comprehensive knowledge of laboratory quality control, quality assurance procedures, and principles of performance improvement providing for sound independent work SPECIFIC REQUIREMENTS: Medical Laboratory Technologist/Clinical Laboratory Scientist (MT, CLS): Technologist must have a Bachelor of Science Degree Technologist must have Medical Laboratory Technologist, Clinical Laboratory Scientist generalist certification from a nationally recognized accrediting agency (ASCP, NCA, AMT etc.) Technologist must have a minimum of two (2) years of laboratory experience SERVICES: Services shall be provided 40 hours per week to include rotating weekends and Federal holidays with flexible eight (8), ten (10) or twelve (12) hour tours. The Chief Technologist, P&LMS (or designee) shall determine, regarding VA needs, the scheduled tour of duty. Employees shall be given one-week notice of schedule changes. Should occasionally overtime hours be required due to short staffing or increased workload, prior approval must be received by the CTVHCS P&LMS Chief Technologist or designee. The Chief, P&LMS (or designee) shall determine, regarding VA needs, the frequency, and lengths of duty hours. Technologists shall perform various clinical laboratory testing procedures in the General Clinical Laboratory in accordance with VA policies and procedures and the regulations of the medical staff bylaws of CTVHCS. Technologists shall provide the Contracting Officer Representative (COR) (or designee) at and a two (2) week notice of all planned leave less than three (3) days to provide quality and timely patient care. RESPONSIBILITIES: Is expected to use independent technical judgment to analyze and interpret laboratory results. Will perform, evaluate, interpret, correlate, and validate the accuracy of laboratory procedures and results. Requires a broad exercise of independent judgment and responsibility with minimal technical supervision. Will be required to monitor quality control systems and measures. Requires the ability to interpret and apply complex written instructions. Must utilize basic knowledge of laboratory equipment and be able to maintain, troubleshoot, and repair instrumentation. May need to resolve problems encountered in the laboratory. Must be able to communicate, consult, and interact with other members of the healthcare team, external relations, customer service, and patient education. Will perform a broad range of laboratory procedures, including advanced and complex laboratory procedures. Must be able to recognize deviation from expected results and use scientific principles to analyze and correct problems. Evaluate and solve problems related to collection and processing of biological specimens for analysis accounting for physiologic processes and requirements. Maintain and document the optimal functioning of laboratory equipment. Use, calibrate, and identify malfunctions; repair and perform preventive maintenance of laboratory equipment. Troubleshoot issues with laboratory instruments and resolve problems. Diagnose deviations in test performance due to instrument malfunction. Perform and document quality control and quality assurance activities and corrective actions related to test performance using statistical principles and theories of performance improvement. Identify discrepancies, solve problems, and present solutions. Answer inquiries regarding test results, methodology, test specificity, test sensitivity, and specific factors that influence test results. Interpret results and suggest follow up test selection or procedures. Must meet all acceptable quality and productivity standards as defined by Chief, P&LMS or designee. EXPERIENCE ON THE FOLLOWING ANALYZERS IS PREFERRED BUT NOT REQUIRED: Sysmex XN3100 Hematology Analyzer & Slide Maker Stainer Sysmex Cellavision Digital Imaging Diagnostica STAR Max Coagulation Analyzer Beckman Iris Velocity & IQ Select Urinalysis Analyzer Beckman Coulter AU5800 Chemistry Analyzer Beckman Coulter DxI800 Immunoassay Analyzer Beckman Coulter Power Express Automation Line Osmometer COMPENSATION: $43.75 per hour plus an additional $4.57 per hour for Health & Welfare POSITION TIMING: Immediate hire upon completion of required background investigation and security package. BENEFITS: Health, Dental and Vision, 401(k), Vacation, Sick Leave, and 11 Paid Federal Holidays including: New Year's Day Martin Luther King, Jr. Day Presidents Birthday Memorial Day Juneteenth Independence Day Labor Day Columbus Day Veterans Day Thanksgiving Day Christmas Day Laredo Technical Services, Inc. (LTSi) is an Equal Opportunity/Affirmative Action Employer. We make employment decisions based on merit and qualifications, ensuring equal opportunity for all applicants and employees. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, or any other characteristic protected by applicable law. LTSi is committed to ensuring an accessible online application process for all individuals, including those with disabilities. We offer alternative application methods for candidates who are unable to complete the online application due to a disability or other need for accommodation. LTSi complies with the Americans with Disabilities Act (ADA), Section 503 of the Rehabilitation Act of 1973, the Vietnam-Era Veterans' Readjustment Assistance Act of 1974, and other relevant state and local laws. If you need assistance with an application due to a disability, please contact **********************.

**Water Lab Technician** **Specific Duties and Responsibilities:** + Must have knowledge and experience in using a wide array of analytical instruments and methods with high emphasis on water analysis + Must be familiar with ICP-MS, Ion Chromatography, XRD, XRF, EDS, SEM, Particle size/count analysis, bacterial analysis, GCMS and FTIR (Emphasis on ICP-MS and Ion Chromatography) + Knowledge of a wide array of sampling methods, bench water analysis instruments and methods such as titration, colorimeter, pH & Conductivity meters, ORP meters, HACH test kits, bacteria analysis such as dip slides and BART methods + Strong troubleshooting background in the field of investigating water analysis, chemical treatment + Knowledge of ISO 17025 Standards + Other duties as assigned. **Qualifications:** + Experience - 8+ years of experience. + Critical thinking; predictive and preventative maintenance, finding root cause of failure. + Work positively with maintenance and operations teams to troubleshoot and solve problems. **Requirements** **:** + High school diploma or equivalent required. + Valid DL + Meet physical demands as listed above + Ability to work overtime, weekends, and holidays as needed by the assigned location + Familiarity with enterprise CMMS (Computer‑Aided Maintenance Management System) software and Confluence is required for daily task management, issue tracking, and collaboration. + Candidates must be comfortable and proficient in the full suite of Microsoft Office (Word, Excel, PowerPoint, Outlook, Teams, OneNote, etc.) and able to learn new office applications quickly. + The role involves extensive use of computers for data entry, documentation, analysis, and internal communication. + Applicants must be legally able to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of employment visa for this position. **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** See the "Know Your Rights" poster available in English and Spanish. **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes, or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners become the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team at **************.** Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

THE COMPANY Built for Heroes and based in Florence, Texas, Staccato is on a mission to proudly serve those who protect and embody American freedoms. As the inventors of the 2011 platform-the World's Best Shooting Pistols-Staccato manufactures its handguns and ammunition in America at their headquarters in Florence, TX. The Staccato 2011 has been approved for on- or off-duty carry by over 1,600 U.S. law enforcement agencies in just five years, including elite teams such as U.S. Marshals Special Operations Group, the Texas Rangers and Miami Dade Special Response Team. With a spirit of American ingenuity and commitment to its family of owners, Staccato guarantees its guns for life, and guarantees supply of its 9mm ammunition to subscribers of its ammo service. Staccato Ranch serves as the place where Staccato unites its family of patriots to celebrate freedom and elevate heroes every day. Staccato was ranked one of the Fastest Growing Private Companies in the Southwest by Inc. Over 25% of our team members are veterans and 100% are patriots. We strive relentlessly to achieve our best every day and are focused on continuous improvement and progress in everything we do. THE MISSION Build the World's Best Shooting Handguns, so everyone can experience shooting excellence. THE POSITION We are seeking a hands-on, hard-working, detail-oriented individual to join our team in an intermediate-level role, building the Best Shooting Handguns in the World. Reporting to the Quality Manager, the successful candidate will possess an exceptional working knowledge of mathematical concepts, excellent visual awareness, and the ability to work with minimal supervision while performing in-depth inspections. Ultimately, the ideal candidate can efficiently monitor the integrity and quality of products without impeding production rates. JOB DESCRIPTION/DUTIES Primary duties will involve conducting specialized coating inspections at various stages, including in-process, post-process, and outplant phases. Additionally, you'll be responsible for meticulously documenting all aspects of these inspections. Secondary duties will involve conducting first article inspections, in-process manufacturing inspections, and various dimensional inspections of Staccato products. Inspecting products according to established Quality and Safety standards. Read and interpret drawings for dimensional callouts. Monitor testing procedures and processes to ensure tests are performed according to item specifications, protocols, and standard test methods. Interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. Complete documentation is necessary to support testing procedures. Ensure equipment is calibrated, validated, and maintained properly and ensure safety during equipment operation. Assist with any Quality concerns and report management concerns. Various tasks to support facility operations (Quality or Production) QUALIFICATIONS In addition to general team member expectations, this role requires explicitly the following: An associate's Degree of Science in an associated field is a plus but not mandatory; it may be substituted with a technical quality certificate, Six Sigma, Lean, or Continuous Improvement certification (ASQ, QMS, etc.). Proficiency in Microsoft Office (specifically Word, Excel, and Outlook) Experience with gauging equipment (calipers, micrometers, drop indicators, hardness testers, optical comparators, etc.) is preferred. Experience with coordinate measuring machines is highly desired. Experience with drawings and interpreting dimensional callouts is a plus. Experience with following processes and documenting results from inspection is preferred. Experience in process auditing is preferred. Prior Quality Control experience is preferred. Understanding of traceability is preferred. We offer a competitive and attractive compensation and benefits package, including health insurance, a 401(k) plan, paid vacation, and holidays. In addition, as a Staccato team member, you enjoy discounts on Staccato products. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

Job Description Quality Assurance Lab Technician Job Type: Full-time | Pay: $19.00 Schedule: 12-hour rotating shifts (days/nights), weekends, holidays, and on-call rotation required. This role is responsible for performing all aspects of quality testing and monitoring for production operations. The technician will analyze standard and non-standard samples to ensure materials meet or exceed established criteria and maintain accurate quality records in the system. The position requires flexibility in scheduling due to the 24/7 nature of operations. Key Responsibilities Conduct in-process and final product testing to verify conformance to standards Analyze samples and document quality results in databases and logs Identify and troubleshoot quality issues, escalating when necessary Monitor inventory of lab materials and maintain equipment calibrations Maintain cleanliness, safety, and compliance in the lab Support internal communication by sharing quality data and customer sample information Requirements Education & Experience Associate degree in a science-related field preferred Completion of a lab technician training program or two years of QA/QC lab experience required Industrial/laboratory experience preferred Skills Ability to read and follow SOPs in English Experience handling chemicals (acids, bases, hazardous materials) Capable of troubleshooting instruments and maintaining a formal quality control process Physical Demands Requires frequent standing, bending, crouching, and lifting up to 25 lbs Must have good vision and the ability to focus and work with fine detail Benefits 401(k) with matching Health, dental, and vision insurance Flexible spending account Paid time off

We at Bestica believe our success is a direct result of hard work and outstanding employee dedication. Our environment is dynamic, friendly, and collaborative. We foster a positive culture, where innovation and synergy are encouraged to build our workplace into a community of like-minded, passionate people. Bestica is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If this opportunity aligns with your capabilities and career desires, please take a moment to visit our website at ****************

TMD High Voltage Lab Production/Warehouse Associate Under the general direction of the High Voltage Lab Supervisor, the HV Lab Production/Warehouse Associate will perform production labor work in a high voltage testing lab. Duties will include cleaning, visually inspecting, and testing a variety of protective equipment used in the electric utility and commercial electric industries, along with packing the products to prepare for shipment. Responsibilities include: Cleaning protective equipment Visual inspection of protective equipment. Testing of a variety of protective equipment used in the electric utility and commercial electric industries Packing of protective equipment products for shipping. Detailed record keeping. Warehouse duties such as receiving and processing incoming stock and materials, picking and filling orders, packing and shipping orders Other duties and responsibilities as assigned or as may be required. Requirements: HS Diploma/GED Stable Multi-year Work History Ability to lift 50 lbs Prefer ability to operate forklift Prefer previous production/assembly experience in a manufacturing environment Attention to Detail Accurate record keeping and documentation skills Acceptable near vision (with or without correction) to be able to read small numbers on products and to be able to identify defects in products Dependability Good Communication Skills (speaking, reading and writing) Ability to stand on feet, bend or stoop for a prolonged period of time Ability to carry out duties in a safe and efficient manner Additional Requirements: Background check clearance including drug screening and I-9 documentation as required by law Texas Meter & Device Company (TMD) has been in continuous operations since 1937 and is the leading supplier of metering services to the utility industry in Texas and other states. TMD is headquartered in Waco, Texas and has approximately 120 employees. We are 100% focused on metering related products and services. EOE

Are you looking for an incredible opportunity to join a dynamic, fast-growing dermatology services company? Epiphany Dermatology, headquartered in Austin, TX, is on a mission to improve access to dermatology services and provide exceptional patient care in underserved markets across the U.S. We are looking for a service-oriented, motivated individual to join us as a Lab Technician to accomplish this mission. With ambitions to increase our reach over the next four to five years, our quickly expanding company has gone from a single site in 2015 to nearly 100 dermatological clinics nationwide. Our employees are the key to our success and we're proud to offer eligible employees great benefits (many at no cost!), perks like free skin care, generous time off plans, the opportunity for growth, and the chance to be part of a purpose-driven organization taking patient care to the next level. We are excited to grow our team with individuals who are as passionate about our patients as we are and invest a lot of time and energy in our employees' development because we believe being a part of the Epiphany team is a career opportunity-not just another job. If you are interested in joining this mission-driven team, please consider applying today! What we are looking for: The Lab Tech is instrumental in providing a variety of support functions that are critical is assisting the Lab Manager and helping ensure smooth operations of the lab. The Lab Tech functions as an integral and collaborative member of the healthcare team, displaying professional behavior and communicating effectively with others. The MA must demonstrate competency in all skills related macroscopic and microscopic tissue processing. Lab Techs are responsible for ensuring lab support is appropriately met by performing the following duties: What you'll do: Laboratory tasks related to receiving, organizing, and preparing patient tissue samples for macroscopic evaluation by the Grossing Technician. These include (but not limited do: Confirming patient identity, accessioning specimens and preparing and correctly labeling specimen blocks. Gross entry - Assisting with entering information provided by the Grossing Technician into the patient's electronic medical record. Laboratory tasks related to receiving, organizing, and preparing patient tissue samples for microscopic evaluation by the Dermatopathologist. These include Correctly labeling completed slides and slide packaging and send-out. Assisting with laboratory send-outs to include slide and block requests. General lab maintenance to include slide and block organization and storage and Maintenance of CLIA required records and documentation. Assistance with completing and maintaining all compliance related paperwork to include temperature and humidity information, chemical reagent log sheets, patient information logs, and quality assurance forms. Adhering to all safety protocols. Provides excellent customer service by greeting them in a competent and courteous, in person or on the telephone and answering or referring inquires. Responsible for accurately and timely completing documentation using both Electronic Medical Record and any required paper documentation while ensuring patient confidentiality. Ensures that blood/body fluids, biohazard materials, needle containers and potentially infectious waste are appropriately disposed of, according to infection control guidelines. Monitors expiration dates and takes action accordingly. Recognizes usage trends affecting unit supplies and makes recommendations for adjustments. Participates in staff meetings and workgroups by providing constructive input for practice improvements and solutions. Other duties as assigned. It'll help to have/be: Proficiency with Microsoft Office Suite. Ability to work with an Electronic Health Record and other related E-Systems. High school diploma or general education degree (GED). Prior anatomic pathology laboratory preferred, but not required. Detail-oriented and able to handle multiple tasks, following through to completion. Identifies self-learning needs related to job description and seeks out appropriate resources to meet learning needs. Maintains regular, reliable and on-site attendance as scheduled by your supervisor. Maintains positive relationships with patients/families, peers, vendors and other team members. Qualifications/Experience: High school diploma or general education degree (GED). Preferred but not required, Prior anatomic pathology laboratory. Preferred but not required, An associate degree in a laboratory science or medical laboratory technology from an accredited institution or an equivalent combination of training and education. Ideally 60 semester credit hours from an accredited institution that include the following: 6 semester credit hours of chemistry 6 semester credit hours of biology 12 semester credit hours of chemistry, biology, or medical laboratory technology in any combination Work Environment and Physical Requirements: Medical office, procedure/exam room and laboratory environment may include exposure to communicable diseases, bloodborne pathogens, biohazards or toxic substances. Daily activities may include standing, walking, sitting, bending and lifting items up to 30 lbs. Benefits: We offer generous benefits including medical, life insurance, short-term disability coverage, mental health services, and more at no cost for eligible employees. In addition, we have great vision, dental, and supplemental insurance options. We also offer 401k with company matching, employee discounts, HSA and FSA, tuition assistance, certification reimbursement, and more!

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of “U.S. Person” go here. ********************************************************************************************** Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Reporting to the Test Lab Manager, as the Test Lab Shift Supervisor you will own the testing process within the value stream for 3rd shift. This role will concentrate on the performance, needs, and execution of the cell (Safety, Quality, Cost, Output, People. The role will take a hands-on approach in supervising hourly associates on 2nd Shift, aligning with 1st and 3rd,shift supervisors regarding goals and priorities, and coordinating with functional support. 2nd Shift: Monday - Friday 3P - 11P What You Will Do Day to Day Work with Engineering Liaison to create a daily schedule and assign operators accordingly to meet it Work with Quality and Test Lab I&F to improve processes within the cell to improve efficiency/eliminate rework Work with 1st and 2nd shift supervisors on priorities and needs Interface with Engineering to address testing needs and maintain schedules Support Macro Plan activities throughout the year People Direct the activities of operators, including training, discipline, safety, communications, and opportunity resolution Create a culture of ownership, accountability, and continuous improvement Lean Transformation Partner with CORE / CI to support the site transformation journey Results Determine / monitor / improve KPI's Positively affect KPI change, including, but not limited to: Output Hours On Time Delivery Housekeeping and 5 S Productivity / Efficiency / Utilization Safety (First Aid, recordables, lost time) Escapes Qualifications You Must Have Typically requires a University Degree and minimum 2 years of prior relevant experience 1 or more years of experience in a manufacturing environment, preferably aerospace 1 or more years of experience in Operations related Management roles (hands on supervision) Strong Core Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork, Openness & Trust Strong organizational, presentation and communication skills Strong knowledge of Microsoft office products Qualifications We Prefer SAP knowledge Lean Manufacturing Experience Direct working experience of the Troy W&B Site / Products. What We Offer Some of our competitive benefits package includes: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Learn More & Apply Now! Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! WE ARE REDEFINING AEROSPACE. *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Monday to Friday 4pm to 12 am - Performing component and **final product inspection** , physical **stability program,** and maintaining documentation of inspection reports to support component, **raw material** and finished **product release.** - Maintaining and tracking all **incoming** and outgoing FQA **product with traceability** through FQA Delivery logbooks and destruction of FQA **Sample logbook.** - Destroying all FQA samples through approved methods. - Maintaining and updating **LMS training daily.** Incumbent has full authority to make decisions and/or take action that is required to carry out job duties. Internal requirements include compliance with ethics, environmental health and safety, financial, human resources, cGMP procedures, general business policies, requirements and objectives. The incumbent must be willing to take temporary assignments as required. Regulated Responsibilities (including cGMP and EHS) Incumbent is expected to be fully compliant with all criteria established by governmental agencies, Ministry of Health, and legislative requirements including, but not limited to: the FDA, European Community (EC), ISO 13485 - Medical Devices, European Economic Community Medical Device Directive (MDD), Canadian Medical Device Regulations (CMDR), OSHA, Sarbanes-Oxley, EPA, DOT, EEOC, and ADA. Incumbent will work to ensure that the company is in compliance with all environmental, health and safety requirements and assure our business practices enhance the welfare of our customers, employees and the community in which we operate. **Years of experience/education and/or certifications required:** Experience: Technical Prefer three (3) to seven (7) years of experience in either **Quality Control/Quality Assurance** functions within the **device, food, or cosmetic industry.** **What are the top 3-5 skills requirements should this person have?** - non-degreed - Organized - Can follow instructions very well - Able to lift 20 pounds - Able to work Overtime/Weekends - Able to adhere to the work schedule as any missed days will put our project behind. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (*********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? * Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. * Innovation: Be a part of a team that's shaping the future of construction and infrastructure. * Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. * Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: * Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment * Read and understand shop fabrication drawings and specs and verify dimensions of product or material * Perform internal audits and maintain quality control inspection records * Act as liaison to outside inspectors * Resolve quality issues due to production and fabrication errors * Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC experience preferred. * Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. * Ability to interpret readings from Micrometers, Calipers, and other QC tools. * Excellent communication and organization skills. Pay: $23-$25 per hour We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

Are you looking for an incredible opportunity to join a dynamic, fast-growing dermatology services company? Epiphany Dermatology, headquartered in Austin, TX, is on a mission to improve access to dermatology services and provide exceptional patient care in underserved markets across the U.S. We are looking for a service-oriented, motivated individual to join us as a Lab Technician to accomplish this mission. With ambitions to increase our reach over the next four to five years, our quickly expanding company has gone from a single site in 2015 to nearly 100 dermatological clinics nationwide. Our employees are the key to our success and we're proud to offer eligible employees great benefits (many at no cost!), perks like free skin care, generous time off plans, the opportunity for growth, and the chance to be part of a purpose-driven organization taking patient care to the next level. We are excited to grow our team with individuals who are as passionate about our patients as we are and invest a lot of time and energy in our employees' development because we believe being a part of the Epiphany team is a career opportunity-not just another job. If you are interested in joining this mission-driven team, please consider applying today! What we are looking for: The Lab Tech is instrumental in providing a variety of support functions that are critical is assisting the Lab Manager and helping ensure smooth operations of the lab. The Lab Tech functions as an integral and collaborative member of the healthcare team, displaying professional behavior and communicating effectively with others. The MA must demonstrate competency in all skills related macroscopic and microscopic tissue processing. Lab Techs are responsible for ensuring lab support is appropriately met by performing the following duties: What you'll do: Laboratory tasks related to receiving, organizing, and preparing patient tissue samples for macroscopic evaluation by the Grossing Technician. These include (but not limited do: Confirming patient identity, accessioning specimens and preparing and correctly labeling specimen blocks. Gross entry - Assisting with entering information provided by the Grossing Technician into the patient's electronic medical record. Laboratory tasks related to receiving, organizing, and preparing patient tissue samples for microscopic evaluation by the Dermatopathologist. These include Correctly labeling completed slides and slide packaging and send-out. Assisting with laboratory send-outs to include slide and block requests. General lab maintenance to include slide and block organization and storage and Maintenance of CLIA required records and documentation. Assistance with completing and maintaining all compliance related paperwork to include temperature and humidity information, chemical reagent log sheets, patient information logs, and quality assurance forms. Adhering to all safety protocols. Provides excellent customer service by greeting them in a competent and courteous, in person or on the telephone and answering or referring inquires. Responsible for accurately and timely completing documentation using both Electronic Medical Record and any required paper documentation while ensuring patient confidentiality. Ensures that blood/body fluids, biohazard materials, needle containers and potentially infectious waste are appropriately disposed of, according to infection control guidelines. Monitors expiration dates and takes action accordingly. Recognizes usage trends affecting unit supplies and makes recommendations for adjustments. Participates in staff meetings and workgroups by providing constructive input for practice improvements and solutions. Other duties as assigned. It'll help to have/be: Proficiency with Microsoft Office Suite. Ability to work with an Electronic Health Record and other related E-Systems. High school diploma or general education degree (GED). Prior anatomic pathology laboratory preferred, but not required. Detail-oriented and able to handle multiple tasks, following through to completion. Identifies self-learning needs related to job description and seeks out appropriate resources to meet learning needs. Maintains regular, reliable and on-site attendance as scheduled by your supervisor. Maintains positive relationships with patients/families, peers, vendors and other team members. Qualifications/Experience: High school diploma or general education degree (GED). Preferred but not required, Prior anatomic pathology laboratory. Preferred but not required, An associate degree in a laboratory science or medical laboratory technology from an accredited institution or an equivalent combination of training and education. Ideally 60 semester credit hours from an accredited institution that include the following: 6 semester credit hours of chemistry 6 semester credit hours of biology 12 semester credit hours of chemistry, biology, or medical laboratory technology in any combination Work Environment and Physical Requirements: Medical office, procedure/exam room and laboratory environment may include exposure to communicable diseases, bloodborne pathogens, biohazards or toxic substances. Daily activities may include standing, walking, sitting, bending and lifting items up to 30 lbs. Benefits: We offer generous benefits including medical, life insurance, short-term disability coverage, mental health services, and more at no cost for eligible employees. In addition, we have great vision, dental, and supplemental insurance options. We also offer 401k with company matching, employee discounts, HSA and FSA, tuition assistance, certification reimbursement, and more!

Job Description Looking to level up your career and boost your income? At Voyage Healthcare, we help connect nurses, therapists, and allied health pros with high-paying travel jobs at top-rated facilities across the U.S. With thousands of openings nationwide, you can earn up to $3,500+ per week (depending on your specialty, location, housing, and benefits)-all while making a real impact on the communities that need you most. Let your next adventure start with us! Position: ALLIED-EP-Electrophysiology Lab Tech (Travel/Contract) We're hiring experienced ALLIED-EP-Electrophysiology Lab Tech for a 13-week contract in Round Rock, Texas - earn up to ($2422 - $2549 per week) while providing essential care at a leading facility. Most candidates will need to have at least 2 years of recent experience in the specialty. Apply & Call us today at ************ for details on this opportunity. Position Details Specialty: ALLIED-EP-Electrophysiology Lab Tech Location: Round Rock, Texas Employment Type: Travel/Contract Pay: $2422 - $2549 per week Shift: 4x10 Days Start Date: ASAP Contract Length: 13-week

Are you an experienced Clinical Lab Professional? Are you looking to looking to embark on a new challenge in your career, or start your career in Clinical Lab Science? If so, LabCorp wants to speak with you about exciting opportunities to join our team at Seton Highland Lakes in Burnet, TX. In this position you will work in a fast paced, customer focused, and challenging environment, and will be a part of our overall mission at LabCorp: “Improving Health, Improving Lives”. Work Schedule: Shift 2, 4x10-hours, Monday - Thursday, 11:30am to 10:00pm Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. Employees who are regularly scheduled to work a 7 on/7 off schedule are eligible to receive all the foregoing benefits except PTO or FTO. For more detailed information, please click here. Job Responsibilities: Determine the acceptability of specimens for testing according to established criteria Perform routine and complex technical procedures and functions according to departmental Standard Operating Procedures Monitor, operate and troubleshoot instrumentation to ensure proper functionality Demonstrate the ability to make technical decisions regarding testing and problem solving. Prepare, test and evaluate new reagents or controls Report accurate and timely test results in order to deliver quality patient care Perform and document preventive maintenance and quality control procedures Identify and replenish testing bench supplies as necessary Assist with processing of specimens when needed Maintain a safe work environment and wear appropriate personal protective equipment Requirements: Bachelor's degree in a Chemical or Biological science, Clinical Laboratory Science, Medical Technology or a non-traditional Bachelor's degree that meets local regulatory (CLIA & State) requirements Minimum 1 year of clinical laboratory testing experience is required OR an MLS degree ASCP or AMT certification is preferred Ability to work independently and within a team environment Proficient with computers; Familiarity with laboratory information systems is a plus High level of attention detail along with strong communication and organizational skills Must be able to pass a standardized color vision screen Flexibility to work overtime or other shifts depending on business needs Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

We are seeking a passionate, dedicated Quality Control Technician to ensure our products exceed industry standards and client expectations. With a focus on quality, sustainability, and innovation, we serve a diverse range of clients across commercial, residential, and infrastructure projects. As a Quality Control Technician, you will play a crucial role in maintaining the quality and integrity of our concrete products. You will be responsible for conducting tests, analyzing data, and developing solutions to improve product quality. This position requires a keen eye for detail, a strong understanding of concrete technology, and the ability to work collaboratively with intersecting departments at SRM such as operations, production, sales, and technical services. Key Responsibilities: Conduct routine and non-routine analyses of raw materials, in-process, and finished concrete products using industry-standard methods. Interpret test results, compare them to established specifications and control limits, and make recommendations on the appropriateness of data for release. Perform visual inspections of finished products to ensure compliance with quality standards and specifications. Collaborate with production teams to identify and troubleshoot production challenges that affect quality. Assist in the development and implementation of quality control training programs for production staff. Maintain accurate and organized records of tests, analyses, and other quality-related activities. Stay updated with the latest trends, technologies, and regulations in the concrete industry to recommend improvements to our quality control processes. Qualifications Able to meet schedule requirements. Shifts vary based on scheduled pours. Candidates must be able to accommodate day shifts, as well as overnight shifts. ACI certification preferred Associate or bachelor's degree in Civil Engineering, Materials Science, Concrete Management, Construction Management, or related field is preferred. 1-3 years of experience in quality control or quality assurance, preferably in the concrete or construction materials industry. Strong understanding of concrete technology and testing methods. Excellent analytical skills and attention to detail. Effective communication and interpersonal skills. Ability to work independently and in a team environment. Proficiency in Microsoft Office and experience with quality management software. Willingness to undergo SRM's pre-employment screenings. About us: SRM strives to be the largest, most profitable construction material company in the country, while maintaining a best-in-class culture. SRM's 5 Principles of Service: Safety, Quality, Kindness, Cleanliness, Go-Getter Why Join Us? Our commitment to our team includes: Growth: Opportunities for advancement in a rapidly growing company. Home Daily: Enjoy work-life balance with daily home time. Competitive Compensation: Hourly pay with eligibility for bonuses and annual raises. Exceptional Benefits: Comprehensive benefits package including low-cost medical, dental, vision, STD, LTD, and life insurance, paid holidays, PTO and vacation programs, 401k with $100 match/week, family days, and more! Overtime Opportunities: Daily overtime after 8 hours and weekly after 40 hours Candidates will be required to undergo a pre-employment drug screen, SRM's pre-employment physical, and consent to background checks, including Clearinghouse and MVR checks. We are an equal-opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Water Lab Technician Specific Duties and Responsibilities: Must have knowledge and experience in using a wide array of analytical instruments and methods with high emphasis on water analysis Must be familiar with ICP-MS, Ion Chromatography, XRD, XRF, EDS, SEM, Particle size/count analysis, bacterial analysis, GCMS and FTIR (Emphasis on ICP-MS and Ion Chromatography) Knowledge of a wide array of sampling methods, bench water analysis instruments and methods such as titration, colorimeter, pH & Conductivity meters, ORP meters, HACH test kits, bacteria analysis such as dip slides and BART methods Strong troubleshooting background in the field of investigating water analysis, chemical treatment Knowledge of ISO 17025 Standards Other duties as assigned. Qualifications: Experience - 8+ years of experience. Critical thinking; predictive and preventative maintenance, finding root cause of failure. Work positively with maintenance and operations teams to troubleshoot and solve problems. Requirements: High school diploma or equivalent required. Valid DL Meet physical demands as listed above Ability to work overtime, weekends, and holidays as needed by the assigned location Familiarity with enterprise CMMS (Computer‑Aided Maintenance Management System) software and Confluence is required for daily task management, issue tracking, and collaboration. Candidates must be comfortable and proficient in the full suite of Microsoft Office (Word, Excel, PowerPoint, Outlook, Teams, OneNote, etc.) and able to learn new office applications quickly. The role involves extensive use of computers for data entry, documentation, analysis, and internal communication. Applicants must be legally able to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of employment visa for this position. Benefits & Compensation We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to https://www.austin-ind.com/our-company/100-employee-owned. Austin Industrial is an Equal Opportunity Employer. See the “Know Your Rights” poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit https://www.austin-ind.com/what-we-do/industrial. No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes, or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners become the property of the Company. Accessibility Note If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217.

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Conduct quality control tests on materials and products. Document and report test results accurately. Collaborate with production teams to ensure quality standards. Identify and troubleshoot quality issues. Maintain and calibrate testing equipment. What Are We Looking For Strong attention to detail and analytical skills. Ability to work independently and as part of a team. Proficiency in using quality control testing equipment. Effective communication and documentation skills. Commitment to maintaining high-quality standards. Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check. Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. Physical Demands Regularly required to stand, walk, and use hands to handle or feel. Frequently required to reach with hands and arms. Occasionally required to climb or balance and stoop, kneel, crouch, or crawl. Must frequently lift and/or move up to 50 pounds. What We Offer Starting Pay $24.00 per hour DOE 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD\&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled #HMSWJobs

Job Description Histotechnician - Full Time, Day Shift Located just west of Austin, Texas Step into a rewarding laboratory role just west of Austin, Texas, where career growth meets Hill Country charm. We're seeking a Histotechnician to join a collaborative lab team full-time during the day shift. This position is perfect for someone who thrives in a precise, fast-paced environment and wants to contribute meaningfully to patient diagnosis and care. With scenic surroundings, a relaxed lifestyle, and access to nearby urban conveniences, this opportunity balances professional development with quality of life. Job Responsibilities Prepare and process tissue specimens for microscopic evaluation, including embedding, cutting, and staining. Follow established quality control, safety, and infection prevention protocols. Operate and maintain histology lab equipment; troubleshoot minor technical issues as needed. Ensure timely documentation and proper labeling of samples. Monitor and maintain laboratory inventory and supply levels. Collaborate with internal lab staff, clinical teams, and external partners to support smooth operations. Participate in lab-based training, process improvement efforts, and educational activities. Demonstrate histology techniques and best practices to students or new team members as needed. Minimum Qualifications High school diploma or GED equivalent required Less than one year of experience in histotechnology (recent graduates encouraged to apply) Strong attention to detail, time management, and organizational skills Knowledge of safety standards, specimen handling, and laboratory protocols Ability to work independently while maintaining strong collaboration with peers Familiarity with laboratory software and digital documentation tools Compensation & Benefits Full-time, day shift role with consistent hours Competitive hourly pay based on experience Eligibility for medical, dental, and vision coverage 401(k) retirement plan with employer match up to 5% Tuition reimbursement and career advancement opportunities Paid Time Off (PTO) starting Day 1 Employee wellness programs and professional development resources Note: Benefits may vary depending on employment level and position type. Ready to Grow Your Lab Career? If you're passionate about laboratory science and want to work in a supportive, well-equipped environment that values precision and purpose, we'd love to hear from you. Apply today and take the next step in your healthcare career journey!

This is an on-site role The shifts offered will be dependent on the skills of the candidates hired. 1st shift Mon-Fri 8-5 2nd shift Mon-Fri 2-10 2nd shift Sun-Thu 2-10 1st shift Tue-Sat 8-5 + Perform routine analytical testing to support **quality control testing of pharmaceutical products.** + Some data interpretation required. + Coordinate testing of samples and input data into computer application. + Should have good laboratory skills, preferably in pharma/biotech. + Experience in operating analytical equipment preferred (analytical balance, total carbon analyzer, spectrophotometer, pH meter). + Should exhibit good problem solving skills. Should possess computer skills as well as good communication skills. + Fast paced environment, team-player who can also work independently, potential for overtime. + 3+ years experience **Education:** + Bachelor degree and 3+ years experience with HPLC + Experience with pharma/biotech quality control testing is preferred but not required. **Top 5 skills/requirements** a. Required Skill 1: Basic **HPLC** instrumentation in a laboratory setting b. Required Skill 2: **Data acquisition software (Chromeleon, Chem station, Empower)** c. Required Skill 3: Bachelor's degree in chemistry or biochemistry or Associate's degree d. Required Skill 4: Attention to detail. e. Required Skill 5: Well organized 1. GMP Laboratory Setting experience 2. Wet Chemistry techniques 3. HPLC / GC testing and/or data **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

At Labcorp we have a passion in helping people live happy and healthy lives. Every day we provide vital information that helps our clients and patients understand their health. If you are passionate about helping people and have a drive for service, then Labcorp could be a great next career step! LabCorp is seeking a Lab Assistant to join our team at Ascension Providence in Waco, TX. This role works in a high volume, production based environment performing a vital component of clinical lab science. Work Schedule: Shift 3, 7-on/7-off, Wednesday - Tuesday, 8:00pm to 6:30am Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. Employees who are regularly scheduled to work a 7 on/7 off schedule are eligible to receive all the foregoing benefits except PTO or FTO. For more detailed information, please click here. Job Responsibilities: Receive and sort clinical lab specimens Prepare specimens for testing and analysis Scan and/or data entry of specimen and patient information Ensure all lab equipment is working properly and perform minor instrumentation maintenance Troubleshoot any specimen related issues Replenish test bench supplies as needed Maintain a clean and safe work environment Complete record logs and other administrative duties as requested Follow all Standard Operating Procedures to ensure safety and quality standards Job Requirements: High school diploma or equivalent Previous medical/lab experience is preferred Prior production experience is a plus Comfortability with handling biological specimens Ability to accurately identify specimens Basic computer knowledge and data entry skills High level of attention to detail with the ability to prioritize and multitask Ability to work in a fast paced production environment and meet established turn-around times Strong communication skills; both written and verbal Ability to sit and/or stand for extended periods of time Must pass a standardized color blindness test Flexibility to work overtime as needed If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.