Labour contractor jobs in Greenville, NC - 41 jobs

Performs a wide range of physical labor tasks in support of trades workers. TYPICAL DAILY DUTIES & RESPONSIBILITIES * Assist skilled trade workers as assigned. * Unload, move, and set up materials. Distribute materials as needed. * Prepare layout areas by properly measuring and marking. * Clean and prepare specific work areas. * Operate various tools, including a shovel, sledgehammer, pickaxe, wrecking bar, concrete saw, chain saw, water pump, air compressor, hand tools, chipper, grinder, sander, paving breaker, jackhammer, and air wrench. * Mix, smooth, and finish concrete. * Motion equipment operator assisting with alignment, movement, or adjustment of machinery, equipment, or materials. * Spray materials such as water, sand, steam, vinyl, pain, or stucco through a hose to clean, coat, and seal surfaces. * Levels earth to grade specifications. * Mop, brush, or spread paints or bituminous compounds over surfaces for protection. * Apply caulk compounds by hand or with a caulking gun to seal crevices. * Grind, sand, or polish surfaces such as concrete, marble, terrazzo, or wood flooring. * Demolish building, saw lumber, dismantle forms, remove projections from concrete, mount pipe changes, and cut and attach insulating materials. * Opportunity to become an approved driver providing crew drop off and pick up for additional pay. * Performs other duties as assigned. * High school diploma, general education degree (GED), or equivalent experience * Prior experience preferred * Ability to listen to, understand, and follow directions. * Ability to remain flexible as assignments and tasks change. * Ability to work with a variety of personalities. * Ability to perform basic math as needed for inventory. * For approved drivers only: Must have a valid driver's license and meet TA Loving's Approved Driver Standards

We are looking for a GENERAL LABORER to join our Wilson plant. As a general laborer with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications. You will work become part of a community that prioritizes not only our customers but also values our dedicated and loyal employees Why apply? Competitive pay Medical and prescription drug coverage Dental and vision coverage Health savings and flexible spending account 401(k) with company match Life insurance and disability coverage Paid vacation Paid holidays Growth & Development opportunities Employee Discounts Mental Health through our Employee Assistance Program Wellness benefits including low-cost gym memberships About the Role: Responsibilities: Mixing and pouring concrete. Operating machinery and equipment, such as concrete mixers and conveyors. Cleaning and maintaining equipment and work areas. Assisting with the transportation and placement of concrete forms and molds. Loading and unloading materials and supplies. Sets up forms in the manufacturing production process of concrete products. Handling and moving heavy construction materials. Following safety protocols and wearing appropriate protective gear. Adhering to quality control standards to ensure the production of high-quality concrete products. Any other miscellaneous tasks assigned by management at any given time and in any given area About You We Require: Able to read and understand work orders and complex instructions. Familiarity with hand tools and power tools. Ability to work outdoors or in open air environment. Preferred - Experience working in a manufacturing environment. Preferred - Experience operating a forklift, especially an industrial forklift. Must be able to lift and move objects up to 50 pounds frequently. Over 50 pounds, a forklift or crane will be used. Must be able to push or pull cart with 80 pounds of force. Must be able to climb stairs and ladders. Must be able to step up 20 inches. About Us: As you explore the career opportunities at Rinker, you'll discover a wide range of positions. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Let's build a better future together. Ready to Apply? The process is simple. Click on the “apply” button to get started. We are looking for a GENERAL LABORER to join our Wilson plant. As a general laborer with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications. You will work become part of a community that prioritizes not only our customers but also values our dedicated and loyal employees Why apply? Competitive pay Medical and prescription drug coverage Dental and vision coverage Health savings and flexible spending account 401(k) with company match Life insurance and disability coverage Paid vacation Paid holidays Growth & Development opportunities Employee Discounts Mental Health through our Employee Assistance Program Wellness benefits including low-cost gym memberships About the Role: Responsibilities: Mixing and pouring concrete. Operating machinery and equipment, such as concrete mixers and conveyors. Cleaning and maintaining equipment and work areas. Assisting with the transportation and placement of concrete forms and molds. Loading and unloading materials and supplies. Sets up forms in the manufacturing production process of concrete products. Handling and moving heavy construction materials. Following safety protocols and wearing appropriate protective gear. Adhering to quality control standards to ensure the production of high-quality concrete products. Any other miscellaneous tasks assigned by management at any given time and in any given area About You We Require: Able to read and understand work orders and complex instructions. Familiarity with hand tools and power tools. Ability to work outdoors or in open air environment. Preferred - Experience working in a manufacturing environment. Preferred - Experience operating a forklift, especially an industrial forklift. Must be able to lift and move objects up to 50 pounds frequently. Over 50 pounds, a forklift or crane will be used. Must be able to push or pull cart with 80 pounds of force. Must be able to climb stairs and ladders. Must be able to step up 20 inches. About Us: As you explore the career opportunities at Rinker, you'll discover a wide range of positions. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Let's build a better future together. Ready to Apply? The process is simple. Click on the “apply” button to get started.

Job DescriptionSUMMARY Performs a wide range of physical labor tasks in support of trades workers. TYPICAL DAILY DUTIES & RESPONSIBILITIES Assist skilled trade workers as assigned. Unload, move, and set up materials. Distribute materials as needed. Prepare layout areas by properly measuring and marking. Clean and prepare specific work areas. Operate various tools, including a shovel, sledgehammer, pickaxe, wrecking bar, concrete saw, chainsaw, water pump, air compressor, hand tools, chipper, grinder, sander, paving breaker, jackhammer, and air wrench. Mix, smooth, and finish concrete. Motion equipment operator assisting with alignment, movement, or adjustment of machinery, equipment, or materials. Spray materials such as water, sand, steam, vinyl, pain, or stucco through a hose to clean, coat, and seal surfaces. Level earth to grade specifications. Mop, brush, or spread paints or bituminous compounds over surfaces for protection. Apply caulk compounds by hand or with a caulking gun to seal crevices. Grind, sand, or polish surfaces such as concrete, marble, terrazzo, or wood flooring. Demolish buildings, saw lumber, dismantle forms, remove projections from concrete, mount pipe changes, and cut and attach insulating materials. Opportunity to become an approved driver providing crew drop off and pick up for additional pay. Performs other duties as assigned. RequirementsSKILLS & EXPERIENCE High school diploma, general education degree (GED), or equivalent experience Prior experience preferred Ability to listen to, understand, and follow directions. Ability to remain flexible as assignments and tasks change. Ability to work with a variety of personalities. Ability to perform basic math as needed for inventory. For approved drivers only: Must have a valid driver's license and meet Approved Driver Standards

We are looking for a GENERAL LABORER to join our Wilson plant. As a general laborer with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications. You will work become part of a community that prioritizes not only our customers but also values our dedicated and loyal employees Why apply? * Competitive pay * Medical and prescription drug coverage * Dental and vision coverage * Health savings and flexible spending account * 401(k) with company match * Life insurance and disability coverage * Paid vacation * Paid holidays * Growth & Development opportunities * Employee Discounts * Mental Health through our Employee Assistance Program * Wellness benefits including low-cost gym memberships About the Role: Responsibilities: * Mixing and pouring concrete. * Operating machinery and equipment, such as concrete mixers and conveyors. * Cleaning and maintaining equipment and work areas. * Assisting with the transportation and placement of concrete forms and molds. * Loading and unloading materials and supplies. * Sets up forms in the manufacturing production process of concrete products. * Handling and moving heavy construction materials. * Following safety protocols and wearing appropriate protective gear. * Adhering to quality control standards to ensure the production of high-quality concrete products. * Any other miscellaneous tasks assigned by management at any given time and in any given area About You We Require: * Able to read and understand work orders and complex instructions. * Familiarity with hand tools and power tools. * Ability to work outdoors or in open air environment. * Preferred - Experience working in a manufacturing environment. * Preferred - Experience operating a forklift, especially an industrial forklift. * Must be able to lift and move objects up to 50 pounds frequently. Over 50 pounds, a forklift or crane will be used. Must be able to push or pull cart with 80 pounds of force. Must be able to climb stairs and ladders. Must be able to step up 20 inches. About Us: As you explore the career opportunities at Rinker, you'll discover a wide range of positions. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Let's build a better future together. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

About us: nat PROpres is a nationwide industry leader in property preservation. We are growing leaps and bounds and want to partner up with reliable vendors who are committed to providing quality and timely results for an honest day's work. In the past 10 years we have been in business, we have seen unprecedented growth and trust from our clients and our vendors, and we have so much more growth to come, we need dedicated property preservation vendors who understand what it takes to build trust and honesty in this industry. We are looking to start contractors as soon as possible. Must have your own vehicle, tools, computer & smartphone. We are also looking for construction subcontractors!!! Must be able to complete the following: Lawn Maintenance, Boarding, Lock Changes & Lock Boxes, Minor Repairs, Major Repairs, Eviction Services, Roof Repair, Replacement & Tarps, Winterizations, Prepare Bids & Reports, Inspections, Rehab (GC work if you have license), Additional items as assigned. Requirements If interested apply below link: APPLICATION: Please click on this link to apply directly: ************************************************* Benefits nat PROpres, prides itself on research and building relationships. We have received vendor and client referrals and we have searched Google, job boards and multiple social media outlets and located your company as an industry provider. We are interested in partnering up with you to help us provide outstanding services to our clients throughout the United States. WE GUARANTEE: On time payments Non Saturated COverage county Transparency with your Bids Non -competitive Bidding process When your BIDS are approved it is assigned to you Thank you for your time, Theresa nat PROpres Recruiting Department Direct: ************** Main Office: *************** RECRUITING CONTACT Tx: ************** Email: Work@nat PROpres.com *********************************************************

Reports To: Mitigation ManagerWhat does a Water/Fire/Mold Cleaning Laborer with Paul Davis do? Serve others within your community in their time of need Make a difference for others that have had a disaster strike their property Work hard and take pride in completing projects (i.e. mitigating flood and fire damage) Be empathetic and show a sense of urgency while communicating through modern technology Why Join The Team? Paul Davis is an industry leader in restoration and reconstruction for insurance providers and commercial properties throughout the United States and Canada. We are growing locally and have career opportunities for individuals who want purpose out of their work. We love creating an opportunity for our team members, providing industry training and giving technicians the opportunity to become experts in the field through certifications and Paul Davis University.Built upon principles of customer service, dynamic decision-making and leadership, we have the tools to continue our rapid growth. Our team puts emphasis into living our Vision, Mission and Values to be more than just a service provider - our Water/Fire/Mold Cleaning Laborers are on the front lines of restoring their communities by being first on site after disasters strike (i.e. floods, fires) and will be leading the mitigation effort to restore the property. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. Why The Team Needs You? Serving others after a disaster has struck their property is not easy. Everyone within Paul Davis needs to have a world-class work ethic, serious attention to detail and love to help people. It is challenging to make customers happy when faced with a traumatic event but you will love being a technician if you take pride in your work and have fun while working with others. Team Compensation and Benefits: Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities Monthly cross-training opportunities to advance your career Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time. Paid training Bonus program for performance Referral program Great culture and team dynamic Hourly pay: $12.00 to $18.00/hour based on experience and certifications Team Qualifications (Requirements): Desire to join a world-class team and contribute a positive attitude Dedication to customer service Fluent in English Valid driver's license with a clean record Have the ability to work nights/weekends and overtime, if needed Ability to lift 75 LBS frequently Desire to continually learn new things Role on the Team (Job Responsibilities): High level performance of water mitigation, tarping, board up, mold remediation, asbestos/lead abatement and carpet cleaning/reinstallation services according to Paul Davis and industry specifications under the supervision of the Mitigation Manager. Focus and dedication to providing excellent customer service. Maintain a clean, properly stocked and organized truck and maintain all company equipment. Be accessible by phone and participate, as necessary, in the on-call schedule. Assist in warehousing and facility related tasks when necessary. You will assist other team members as you see opportunities arise and be a leader for the team when needed. Please apply if you think you have what it takes to serve others and deliver a world-class service when others need it the most. We are looking forward to discussing this opportunity with you.We support and hire Veterans and we are an Equal Opportunity Employer! Compensation: $12.00 - $18.00 per hour Since 1966, Paul Davis has been an industry leader in the areas of property damage mitigation, reconstruction and remodeling. With more than 370 offices in our franchise network, the company serves residential, institutional, and commercial customers and clients across the United States and Canada. We have built our heritage one project at a time, establishing a reputation for performance, integrity and responsibility among customers and carriers alike. Whether property damage is caused by water, fire, smoke, storms or other disasters, we deliver on our promise to deliver excellence, expertise and a customer experience that is second to none. At Paul Davis, our passion for quality drives everything we do. Our Vision: To Provide Extraordinary Care While Serving People In Their Time Of Need. Our Values: Deliver What You Promise Respect The Individual Have Pride In What You Do Practice Continuous Improvement Our Mission: To provide opportunities for great people to deliver Best in Class results

Your main goal as a Crawlspace Technician/Construction Laborer will be to help solve customers' problems regarding the condition of their crawl space and/or basement. You will be working closely with 1-2 other crew members to address our customers' needs by remediating moisture issues (laying moisture barrier, digging drains, installing dehumidifiers, etc.) and helping to repair structural damage (sistering joists, building drop girders, etc.) in the crawl space and/or basement. What We Offer: Competitive Pay: base pay based on experience/skill, plus bonus program. Training: paid hands-on training; perfect for those who are eager to learn and grow Health: Employer sponsored Health insurance is available, as well as group Dental, Vision, Short-Term Disability, and Voluntary Life insurance. Relax: Holiday Pay and Paid Time Off Retirement: IRA with Company Match available Growth: build your skills and experience to grow in the company Stability: full-time, non-seasonal work in a supportive, value-driven environment Will be supplied work shirts, hats, headlamps, knee pads, and crawl suit. Must provide own work khakis. What You'll Do: Light carpentry Hauling material Light plumbing Light masonry Tool Inventory/Maintenance Who We're Looking For: The ideal candidate is someone who ... Has previous experience with construction and repair (preferred), most notably repairs in the crawlspace, including structural repair (sills, girders, joists, subfloors, piers) and moisture remediation (interior french drains, moisture barriers, dehumidification systems). Is willing to be flexible in duties from day to day and hour to hour. Has a Driver's License, and is able to pass a DMV license check and have reliable transportation to and from work. Has excellent people skills, professional in their interactions with both customers and coworkers. Has a strong desire to reach and exceed set goals in all areas of the job. Ability to exert up to 100 pounds of force occasionally and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly.

GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Position Overview The Interior Aircraft Technician - Finisher is responsible for performing high-quality finishing, installation, repair, and refurbishment of aircraft interior components. This includes cabin panels, sidewalls, headliners, lavatories, galleys, cabinetry finish work, and soft goods. The Finisher ensures all interior surfaces meet FlyExclusive's standards for fit, finish, safety, and compliance. This role requires strong craftsmanship, attention to detail, and the ability to work with a variety of materials including veneers, laminates, composites, plastics, and upholstery coverings. Key Responsibilities Interior Finishing & Installation Perform final finishing on interior components, including sanding, varnishing, polishing, and detailing. Install cabin panels, bulkheads, doors, overhead bins, galley components, lavatory assemblies, and trim pieces. Fit and align interior components to achieve tight tolerances and a high-end appearance. Apply decorative laminates, veneers, and surface coverings to interior panels and cabinetry. Repair & Refurbishment Perform repair or refurbishment of damaged interior components including panels, trim, and finish materials. Restore or replace worn laminates, veneers, and surface coatings. Conduct minor composite or structural repairs within interior components when required. Assist in removal and reinstallation of interior assemblies during maintenance projects. Quality & Detail Work Inspect completed work to ensure alignment, finish quality, and compliance with design specifications. Perform final detailing, cleaning, polishing, and finishing to deliver a professional cabin appearance. Support quality inspections and resolve discrepancies as directed. Technical Skills & Tools Read and interpret engineering documents, drawings, and installation guides. Operate tools such as sanders, polishers, heat guns, routers, cutting tools, and adhesive applicators. Mix and apply adhesives, sealants, and finishes per manufacturer specifications. Documentation & Communication Complete work orders, material usage logs, and repair documentation accurately. Communicate progress, material needs, and issues to Leads and Supervisors. Support coordination with upholstery, cabinetry, and paint teams to ensure project flow. Safety & Compliance Follow all FAA, OEM, and company procedures for interior maintenance and refurbishment. Adhere to OSHA safety standards, PPE usage, and proper handling of chemicals and adhesives. Maintain a clean, organized, FOD-free work area. Qualifications 3-5+ years of experience in aircraft interiors, cabinetry finishing, automotive interiors, or similar craft. Strong craftsmanship in finishing, sanding, laminating, and precision installation. Experience with veneers, laminates, and interior composite materials highly preferred. Ability to read drawings, follow work instructions, and maintain high-quality standards. Strong attention to detail and ability to work independently or as part of a team. Physical Requirements Ability to lift up to 50 lbs and work in confined areas inside the aircraft cabin. Comfortable with bending, kneeling, climbing, and standing for extended periods. Must be able to work with chemicals, adhesives, and finishing materials safely. Work Environment Fast-paced MRO and refurbishment environment. Overtime, weekend work, or shift adjustments may be required based on project timelines.

Summary: The Yard Laborer is responsible for safely and efficiently performing general labor duties at a hauling company, transfer station, recycling center or landfill. Responsibilities may include such things as cleaning portable restrooms, yard clean-up, fueling vehicles, washing equipment, small equipment operation, general office maintenance, acting as helper on a garbage truck, and other related duties. Essential Duties and Responsibilities Safely and efficiently perform assigned responsibilities to include such duties as: Cleaning and maintaining work areas; Fueling vehicles and equipment; Cleaning equipment Perform yard work, including mowing and paper pick-up. Clean portable restrooms Operate general site vehicles and equipment such as skid steers, mowers, trimming equipment, etc. Perform general office maintenance and repairs, including painting and janitorial work. Install temporary fences Direct traffic at the site as necessary. Act as a helper on garbage trucks Pressure wash containers and portable restrooms Assist with special events Follow and comply with all safety policies. Additional duties as assigned. QUALIFICATIONS To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/ and or Experience:. * A valid non-CDL driver's license is required. * Experience in the Solid Waste Industry preferred. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Lifting (50-100 pounds), outside environment WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Outdoors In addition to the above, the performance of other related duties may be required. I have read and understand the contents of the above job description.

The purpose of this position is to assist in the maintenance of City streets, roads, and stormwater infrastructure. This is accomplished by constructing and repairing streets, sidewalks, and curbs; cleaning ditch lines; operating hand tools; driving dump trucks; raking asphalt and concrete; and maintaining light equipment and vehicles. FLSA: Non-Exempt This is a continuous recruitment and may close at any time. Examples of Duties Street and Storm Water Maintenance * Applies sealant material; * Rebuilds road shoulders; * Applies asphalt surfaces; * Reconditions deteriorating sidewalks, curbs, and repairs utility cuts; * Controls vegetation growth; * Removes limbs and other material from creek banks; and * Reconstructs basin/manholes and storm drain pipe. Operates and Transports Equipment * Drives dump trucks as assigned; * Operates weed eaters, plate tamps, chainsaws, mixers, and other applicable hand and power tools; * Transports light equipment to and from job sites; and * Performs preventative maintenance on all assigned equipment. Support Activities * Assists other department divisions with inclement weather cleanup and special event activities; and * Performs other duties as assigned. Minimum Qualifications Education and Experience: * High school diploma or GED; and * At least one year of experience as a construction worker or experience in a related field. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: Knowledge of: * a variety of construction equipment used. * policies and procedures to promote a safe and secure work environment. * materials and methods used in the construction or repair of streets, roads, and stormwater infrastructure. Skilled in: * identifying alternative solutions to problems. * managing one's own time. * operating equipment. * making minor repairs and maintenance to equipment. Ability to: * learn the details and procedures involved in performing a variety of manual tasks. * understand and follow oraland written instructions. * communicate effectivelyin oral and written forms. * identify hazards in assigned work areas. * work in a variety of weather conditions with exposure to the outdoor elements. * work safely without presenting a direct threat to self or others. * meet the mental and physical demands of the job. Special Requirements * Valid N.C. Driver's License * Valid N.C. Class A or B Commercial Driver's License (CDL), required within twelve months of hire. * This position requires the ability to lift and/or carry 50 pounds frequently and up 100 pounds occasionally.

POSITIONS AVAILABLE: 2+ PRIMARY FUNCTION: Perform a wide variety of technical and physical duties in the placement and finishing of concrete curb, slabs, and structures. May operate machinery, hand and power tools of all types: saws, air hammers, tampers, cement mixers, floats and trowels, small mechanical hoists, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces and forms, as well clean up debris and work area. ESSENTIAL DUTIES: Concrete Finishers * Operate a variety of complex equipment including trucks, backhoes, air compressors, hydro hammers, jackhammers, vibrators, brooms, pumps, loaders, concrete saws and mixers, hammer drills, generators and other similar equipment and machinery in repairing and installing concrete. * Assist with preparation of concrete base including setting wood forms and positioning steel; measure and pour concrete; finish concrete; remove wooden forms and backfill; clean site; spread loam. * Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials. * Clean and prepare construction sites to eliminate possible hazards. * Control traffic passing near, in, and around work zones. * Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine. * Wet concrete surface and rub with stone to smooth surface and obtain specified finish. Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel. * Perform necessary work while complying with all company policies and procedures. * Perform additional duties as required or directed by their immediate supervisor or other manager. * Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. MINIMUM REQUIREMENTS: Education: * High school diploma or GED preferred, but not required Work Experience: * Minimum of 3 plus years' experience preferred as a concrete finisher. * Previous bridge construction experience a plus. Forming and pouring concrete foundations, walls and slabs. * Previous carpentry experience a plus. * Must be a minimum of 21 years old. * Candidate must have a good work ethic and work as a team player. * Must be able to work nights, weekends or overtime as needed. * Overnight travel will be required for Asheville, NC job. * Meet departmental grooming and performance standards and have a regular and predictable attendance. Other: * Must have a valid driver's license with a good MVR. * Candidate must have reliable transportation to the job site. * Must not be frighten of heights or working near or over water. Heavy physical demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

The Helper will safely assist drivers and other employees in the collection of solid waste materials from a residential truck. At GFL our goal is to invest in our people and provide opportunities to grow for life! Our employees are affectionately known as team green, a name that unites us all under our shared purpose of providing sustainable solutions to enable our customers and communities to be GREEN FOR LIFE! * 15 days of paid time off * 4 medical plan options including an HSA with employer contribution & match program * Medical, dental, and vision coverage. * 401(k) with an employer match * Paid holidays * Employee Assistance Program with free counseling services. Overview: GFL Environmental is one of North America's leading waste management companies, proudly making communities cleaner, safer, and happier through first-class service. Working for GFL is more than a job - it's an opportunity to grow in your career, make new friends, and make a difference each day. Key Responsibilities: * Collect solid waste/recyclable materials from customer premises and/or from the curbside if applicable. * Load solid waste into the rear or side of waste collection vehicle * Sort recyclables and deposit materials into the appropriate compartments in collection truck if applicable. * Assist driver in safe operation of the vehicle by directing the driver in backing up the vehicle and in close space maneuvering. * Operate equipment on truck to compact trash/materials into vehicle. * Audit waste collection vehicle for proper equipment prior to leaving branch (i.e., broom, shovel, etc.). * Report all customer related problems to driver immediately * Identify, tag and notify driver of prohibited waste items and remove the items from the waste cart or can. * Follow all safety and equipment checks and precautions in performance of all duties. Comply with all federal, state/provincial, local and company rules on safety and vehicle operation. * Work closely with supervisor to improve routing efficiencies. * Maintain predetermined route quality standards. * Ensure that all required personal protective equipment be worn at all times (i.e., gloves, reflective vest, safety glasses, work boots, etc.) * Exhibit a professional demeanor, manner and appearance at all times (i.e., meeting customers and/or the general public while on route or in uniform.) * Follow all safety and equipment checks and precautions in performance of all duties. * Assist driver in keeping interior cab and exterior of vehicle clean. * Assist when necessary in sorting, cleaning carts, cleaning warehouse, stacking pallets/gaylords, placement of cans in roll-off container, operation of cardboard compactor. * Attend safety and branch meetings. * Perform other duties and responsibilities as required or requested by management. Requirements: * High school diploma or general education degree (GED) desired, but not required. * One (1) to three (3) months related experience and/or training desired, but not required. * Valid driver's license preferred, but not required. * Must be able to meet relevant criteria for safety sensitive functions according to Company standards Knowledge, Skills and Abilities: * Ability to read, write, and communicate with others. * Ability to follow instructions and perform duties under limited supervision * Ability to operate any equipment necessary to perform job Physical/Mental Demands: * Must be able to stand, walk, bend, reach and lift in an outdoor environment 90% of the time. * Must be able to use hands and fingers, kneel, crawl, talk, hear, climb and balance. * Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. * Ability to manually lift/move up to 65 pounds regularly * Ability to manually push/move up to 100 pounds with assistance from another employee Working Conditions: * Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending upon season), moving mechanical parts, vibrations, toxic and caustic chemicals, fumes and airborne particles * Work in outdoor environment up to 100% of the time. * Works route away from branch location on a continuous basis throughout the day. * Occasionally work in high precarious places * Work in motor vehicle traffic conditions constantly. * Work environment is normally loud #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact ******************************* This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.

EDUCATION AND EXPERIENCE REQUIREMENTS:• Previous work experience in a manufacturing environment.• High school education or the equivalent.• Career Readiness CertificationLICENSES OR CERTIFICATIONS:ESSENTIAL PURPOSE OF THIS POSITION:The utility helper is responsible for material movement in the CCV tower and ensuring the manufacturing of a quality product as efficiently as possible. These responsibilities include, but are not limited to, the movement of compounds from the receiving area to the machine, assisting the operator & helper with operations of equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES:• Load, unload, and store compound.• Retrieve raw materials and assist in loading them as the process requires.• Movement of materials using elevator and material movement equipment.• Off load on appropriate floor• Pull compound by checking approved batch list and follow procedures as indicated.• Assist in maintaining a clean work area (general housekeeping).• Perform other duties as directed by Supervisor. SKILLS AND ABILITIES REQUIRED:• Read, write, perform mathematical calculations, understand verbal or written instructions, provide verbal or written information to others, work continuous shift if requested, work scheduled or unscheduled overtime if requested, maintain a good attendance and punctuality record, follow all safety rules and maintain housekeeping in area of responsibility, work well with others, and distinguish colors correctly.• Must be able to move about freely in a heavy industrial environment.• Must be able to move raw material utilizing elevator, moving material in and out of elevator safely.• Must be able to qualify as a lift operator.• This position requires standing and walking for most of the shift. This position requires lifting, bending, pushing and pulling. Some pushing of reels will be necessary. Most lifting is accomplished with material handling devices, i.e. elevator, hoists, etc.• Must be able to maintain work area as a clean room environment COMPUTER EQUIPMENT AND SOFTWARE REQUIREMENTS:• OJT - Will use company systems - PRT and/or MX OpenSCOPE OF DUTIES AND RESPONSIBILITIES:This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

EDUCATION AND EXPERIENCE REQUIREMENTS:• Previous work experience in a manufacturing environment.• High school education or the equivalent.• Career Readiness CertificationLICENSES OR CERTIFICATIONS:ESSENTIAL PURPOSE OF THIS POSITION:The utility helper is responsible for material movement in the CCV tower and ensuring the manufacturing of a quality product as efficiently as possible. These responsibilities include, but are not limited to, the movement of compounds from the receiving area to the machine, assisting the operator & helper with operations of equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES:• Load, unload, and store compound.• Retrieve raw materials and assist in loading them as the process requires.• Movement of materials using elevator and material movement equipment.• Off load on appropriate floor• Pull compound by checking approved batch list and follow procedures as indicated.• Assist in maintaining a clean work area (general housekeeping).• Perform other duties as directed by Supervisor. SKILLS AND ABILITIES REQUIRED:• Read, write, perform mathematical calculations, understand verbal or written instructions, provide verbal or written information to others, work continuous shift if requested, work scheduled or unscheduled overtime if requested, maintain a good attendance and punctuality record, follow all safety rules and maintain housekeeping in area of responsibility, work well with others, and distinguish colors correctly.• Must be able to move about freely in a heavy industrial environment.• Must be able to move raw material utilizing elevator, moving material in and out of elevator safely.• Must be able to qualify as a lift operator.• This position requires standing and walking for most of the shift. This position requires lifting, bending, pushing and pulling. Some pushing of reels will be necessary. Most lifting is accomplished with material handling devices, i.e. elevator, hoists, etc.• Must be able to maintain work area as a clean room environment COMPUTER EQUIPMENT AND SOFTWARE REQUIREMENTS:• OJT - Will use company systems - PRT and/or MX OpenSCOPE OF DUTIES AND RESPONSIBILITIES:This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Job Description We are looking for a GENERAL LABORER to join our Wilson plant. As a general laborer with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications. You will work become part of a community that prioritizes not only our customers but also values our dedicated and loyal employees Why apply? Competitive pay Medical and prescription drug coverage Dental and vision coverage Health savings and flexible spending account 401(k) with company match Life insurance and disability coverage Paid vacation Paid holidays Growth & Development opportunities Employee Discounts Mental Health through our Employee Assistance Program Wellness benefits including low-cost gym memberships About the Role: Responsibilities: Mixing and pouring concrete. Operating machinery and equipment, such as concrete mixers and conveyors. Cleaning and maintaining equipment and work areas. Assisting with the transportation and placement of concrete forms and molds. Loading and unloading materials and supplies. Sets up forms in the manufacturing production process of concrete products. Handling and moving heavy construction materials. Following safety protocols and wearing appropriate protective gear. Adhering to quality control standards to ensure the production of high-quality concrete products. Any other miscellaneous tasks assigned by management at any given time and in any given area About You We Require: Able to read and understand work orders and complex instructions. Familiarity with hand tools and power tools. Ability to work outdoors or in open air environment. Preferred - Experience working in a manufacturing environment. Preferred - Experience operating a forklift, especially an industrial forklift. Must be able to lift and move objects up to 50 pounds frequently. Over 50 pounds, a forklift or crane will be used. Must be able to push or pull cart with 80 pounds of force. Must be able to climb stairs and ladders. Must be able to step up 20 inches. About Us: As you explore the career opportunities at Rinker, you'll discover a wide range of positions. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Let's build a better future together. Ready to Apply? The process is simple. Click on the “apply” button to get started.

Performs a wide range of physical labor tasks in support of trades workers. TYPICAL DAILY DUTIES & RESPONSIBILITIES * Assist skilled trade workers as assigned. * Unload, move, and set up materials. Distribute materials as needed. * Prepare layout areas by properly measuring and marking. * Clean and prepare specific work areas. * Operate various tools, including a shovel, sledgehammer, pickaxe, wrecking bar, concrete saw, chain saw, water pump, air compressor, hand tools, chipper, grinder, sander, paving breaker, jackhammer, and air wrench. * Mix, smooth, and finish concrete. * Motion equipment operator assisting with alignment, movement, or adjustment of machinery, equipment, or materials. * Spray materials such as water, sand, steam, vinyl, pain, or stucco through a hose to clean, coat, and seal surfaces. * Levels earth to grade specifications. * Mop, brush, or spread paints or bituminous compounds over surfaces for protection. * Apply caulk compounds by hand or with a caulking gun to seal crevices. * Grind, sand, or polish surfaces such as concrete, marble, terrazzo, or wood flooring. * Demolish building, saw lumber, dismantle forms, remove projections from concrete, mount pipe changes, and cut and attach insulating materials. * Opportunity to become an approved driver providing crew drop off and pick up for additional pay. * Performs other duties as assigned. * High school diploma, general education degree (GED), or equivalent experience * Prior experience preferred * Ability to listen to, understand, and follow directions. * Ability to remain flexible as assignments and tasks change. * Ability to work with a variety of personalities. * Ability to perform basic math as needed for inventory. * For approved drivers only: Must have a valid driver's license and meet TA Loving's Approved Driver Standards

Job Description GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Position Overview The Interior Aircraft Technician - Finisher is responsible for performing high-quality finishing, installation, repair, and refurbishment of aircraft interior components. This includes cabin panels, sidewalls, headliners, lavatories, galleys, cabinetry finish work, and soft goods. The Finisher ensures all interior surfaces meet FlyExclusive's standards for fit, finish, safety, and compliance. This role requires strong craftsmanship, attention to detail, and the ability to work with a variety of materials including veneers, laminates, composites, plastics, and upholstery coverings. Key Responsibilities Interior Finishing & Installation Perform final finishing on interior components, including sanding, varnishing, polishing, and detailing. Install cabin panels, bulkheads, doors, overhead bins, galley components, lavatory assemblies, and trim pieces. Fit and align interior components to achieve tight tolerances and a high-end appearance. Apply decorative laminates, veneers, and surface coverings to interior panels and cabinetry. Repair & Refurbishment Perform repair or refurbishment of damaged interior components including panels, trim, and finish materials. Restore or replace worn laminates, veneers, and surface coatings. Conduct minor composite or structural repairs within interior components when required. Assist in removal and reinstallation of interior assemblies during maintenance projects. Quality & Detail Work Inspect completed work to ensure alignment, finish quality, and compliance with design specifications. Perform final detailing, cleaning, polishing, and finishing to deliver a professional cabin appearance. Support quality inspections and resolve discrepancies as directed. Technical Skills & Tools Read and interpret engineering documents, drawings, and installation guides. Operate tools such as sanders, polishers, heat guns, routers, cutting tools, and adhesive applicators. Mix and apply adhesives, sealants, and finishes per manufacturer specifications. Documentation & Communication Complete work orders, material usage logs, and repair documentation accurately. Communicate progress, material needs, and issues to Leads and Supervisors. Support coordination with upholstery, cabinetry, and paint teams to ensure project flow. Safety & Compliance Follow all FAA, OEM, and company procedures for interior maintenance and refurbishment. Adhere to OSHA safety standards, PPE usage, and proper handling of chemicals and adhesives. Maintain a clean, organized, FOD-free work area. Qualifications 3-5+ years of experience in aircraft interiors, cabinetry finishing, automotive interiors, or similar craft. Strong craftsmanship in finishing, sanding, laminating, and precision installation. Experience with veneers, laminates, and interior composite materials highly preferred. Ability to read drawings, follow work instructions, and maintain high-quality standards. Strong attention to detail and ability to work independently or as part of a team. Physical Requirements Ability to lift up to 50 lbs and work in confined areas inside the aircraft cabin. Comfortable with bending, kneeling, climbing, and standing for extended periods. Must be able to work with chemicals, adhesives, and finishing materials safely. Work Environment Fast-paced MRO and refurbishment environment. Overtime, weekend work, or shift adjustments may be required based on project timelines.

Job Description: We are seeking a dependable Carpenter / Skilled Laborer to join our commercial and residential construction team. This position is ideal for someone with carpentry experience and a broad skill set across multiple trades. Work includes new construction, renovations, and repairs on both residential and commercial projects. Responsibilities: Perform rough and finish carpentry work Assist with and perform tasks across multiple trades, including drywall, painting, flooring, concrete, and minor electrical or plumbing (as permitted) Read and interpret blueprints, drawings, and work orders Frame walls, floors, and roofs Install doors, windows, trim, cabinetry, and hardware Demolition, site prep, and material handling Operate hand and power tools safely and efficiently Maintain a clean, organized, and safe job site Work with supervisors, subcontractors, and other crew members to complete projects on schedule Qualifications: Experience in carpentry and general construction Ability to work across multiple trades with minimal supervision Knowledge of construction tools, materials, and methods Basic understanding of building codes and job site safety Ability to follow instructions and work independently when required Reliable transportation and valid drivers license Ability to lift heavy materials and work in varying weather conditions Preferred (but not required): Experience in both commercial and residential construction OSHA 10 or OSHA 30 certification Ability to lead helpers or apprentices Benefits: Competitive pay based on experience Steady, year-round work Opportunities for advancement Paid time off and holidays (if applicable)

We are seeking a dependable Carpenter / Skilled Laborer to join our commercial and residential construction team. This position is ideal for someone with carpentry experience and a broad skill set across multiple trades. Work includes new construction, renovations, and repairs on both residential and commercial projects. Responsibilities: Perform rough and finish carpentry work Assist with and perform tasks across multiple trades, including drywall, painting, flooring, concrete, and minor electrical or plumbing (as permitted) Read and interpret blueprints, drawings, and work orders Frame walls, floors, and roofs Install doors, windows, trim, cabinetry, and hardware Demolition, site prep, and material handling Operate hand and power tools safely and efficiently Maintain a clean, organized, and safe job site Work with supervisors, subcontractors, and other crew members to complete projects on schedule Qualifications: Experience in carpentry and general construction Ability to work across multiple trades with minimal supervision Knowledge of construction tools, materials, and methods Basic understanding of building codes and job site safety Ability to follow instructions and work independently when required Reliable transportation and valid driver's license Ability to lift heavy materials and work in varying weather conditions Preferred (but not required): Experience in both commercial and residential construction OSHA 10 or OSHA 30 certification Ability to lead helpers or apprentices Benefits: Competitive pay based on experience Steady, year-round work Opportunities for advancement Paid time off and holidays (if applicable) Compensation: $16.00 - $18.00 per hour Since 1966, Paul Davis has been an industry leader in the areas of property damage mitigation, reconstruction and remodeling. With more than 370 offices in our franchise network, the company serves residential, institutional, and commercial customers and clients across the United States and Canada. We have built our heritage one project at a time, establishing a reputation for performance, integrity and responsibility among customers and carriers alike. Whether property damage is caused by water, fire, smoke, storms or other disasters, we deliver on our promise to deliver excellence, expertise and a customer experience that is second to none. At Paul Davis, our passion for quality drives everything we do. Our Vision: To Provide Extraordinary Care While Serving People In Their Time Of Need. Our Values: Deliver What You Promise Respect The Individual Have Pride In What You Do Practice Continuous Improvement Our Mission: To provide opportunities for great people to deliver Best in Class results