Lead hardware engineer full time jobs - 35 jobs

Burns & McDonnell is a company made up of more than 8,000 engineers, architects, construction professionals, scientists, consultants, and entrepreneurs with offices across the country and throughout the world. Burns & McDonnell has exciting opportunities for those interested in growing their careers in one of the most fast paced, innovative sectors of high tech building design and construction. Project focus would be mission-critical data center projects. This opportunity hires directly into our Mission Critical team and into a multibillion-dollar industry that is growing at an exponential rate. Data Centers are an aggressive market for Burns & McDonnell and are highlighted by several priority articles on our site. Mission Critical is an international practice for Burns & McDonnell that involves exciting, collaborative work across many different departments. Burns & McDonnell has exciting opportunities for those interested in growing their careers in one of the most fast paced, innovative sectors of high tech building design and construction. Project focus would be mission-critical data center projects. This opportunity hires directly into our Mission Critical team and into a multibillion-dollar industry that is growing at an exponential rate. Data Centers are an aggressive market for Burns & McDonnell and are highlighted by several priority articles on our site. Mission Critical is an international practice for Burns & McDonnell that involves exciting, collaborative work across many different departments. Specific areas of responsibility include the following: + Designing electrical systems/equipment to provide for a useful and safe workplace. + Advise clients regarding electrical systems/requirements available to meet their needs and comply with safety codes. + Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes. + Participate in developing the design criteria for protective device coordination, relay applications, medium voltage transformers, switchgear, medium and low voltage distribution. + Reviews electrical designs and specifications of equipment or systems being purchased or fabricated. + Developing concept studies and design. + Enforces standards and practices. Qualifications + Bachelor Degree in Electrical Engineering or related degree from an ABET accredited program. and 3 years of electrical engineering experience, consulting preferred. Required or + Bachelor Degree in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. and 3 years of electrical engineering experience, consulting preferred. Required or + Master Degree in Electrical Engineering and 2 years of electrical engineering experience, consulting preferred. Required + Strong knowledge in standard engineering techniques and procedures. + Excellent written and verbal communication skills. + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. + Proficient in standard engineering techniques and procedures. + Strong computer skills (e.g. Microsoft Office Suite) + Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.Preferred Criteria + Data center or telecommunication facility experience. + Knowledge of critical facility electrical design. + Understanding of NFPA 70, 70E, 75, 101 and other applicable sections. + Ability to write specifications for electrical equipment, devices, and material. + Familiarity with other building systems and coordination with those systems and components. + EIT professional designation with ambition to attain PE license. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans Job Electrical Engineering Primary Location US-OH-Columbus Schedule: Full-time Travel: Yes, 25 % of the Time Req ID: 233871 Job Hire Type Experienced #LI-EH #GFS

Principal CAE Engineer - Hybrid Required to be onsite 3 days per week in Towson, MD or Valley City OH or New Britian CT. Come Build Something that Matters It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World™. Sound like you? Join our top-notch team of more than 50,000 diverse and high-performing professionals globally who are making their mark on some of the world's most beloved brands, including DEWALT , BLACK+DECKER , CRAFTSMAN , STANLEY , CUB CADET , and HUSTLER . It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World™. Sound like you? Join our top-notch team of more than 50,000 diverse and high-performing professionals globally who are making their mark on some of the world's most beloved brands, including DEWALT , BLACK+DECKER , CRAFTSMAN , STANLEY , CUB CADET , and HUSTLER . The Job: As a Principal CAE Engineer, you'll be part of our Tools & Outdoor Central Engineering team as a full-time hybrid employee. You'll get to: • Develop best practices and standards for the Product CAE teams to develop and validate products more efficiently and effectively. You will focus on reviewing and vetting the software and hardware that best fits the needs of our organization. • Optimize the product design processes to increase the speed and quality of our product launches. • Build partnerships with external vendors, academic institutions, national labs and technology providers. • Develop metrics and reporting for the T&O CAE teams. • Develop automation of CAE processes and reporting to increase the efficiencies of our CAE teams. The Person: You love to learn and grow and be acknowledged for your valuable contributions. You're not intimidated by innovation. Wouldn't it be great if you could do your job and do a world of good? In fact, you embrace it. You also have: • Bachelor's Degree in Engineering or Related Discipline. • 10+ Years Technical Experience in the CAE Discipline in a New Product Development Environment with Electro-Mechanical Devices. • Experience with complex multi-domain based system modeling with Dymola or TwinBuilder or other Modelica based platforms highly preferred. • Experience with Matlab/Simulink/Stateflow for embedded system design and MIL/SIL/HIL a plus. • Strong interpersonal skills, good oral, written, and presentation skills. • Trained in the use of multiple CAE tools. • Demonstrate successful performance with attention to detail while managing multiple projects • Work effectively with minimal supervision and maintain good working relationship with internal and external teams & customers The Details: You'll receive a competitive salary and a great benefits plan, including: Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off, and tuition reimbursement. Discounts on Stanley Black & Decker tools and other partner programs. And More: We want our company to be a place you'll want to be - and stay. Being part of our team means you'll get to: Grow: Be part of our global company with 20+ brands to grow and develop your skills along multiple career paths. Learn: Have access to a wealth of learning resources, including our digital learning portal. Belong: Experience an awesome place to work, where we have mutual respect and a great appreciation for a wide range of perspectives and experiences. Give Back: Help us continue to make positive changes locally and globally through volunteerism, giving back, and sustainable business practices. What's more, you'll get that pride that comes from empowering makers, doers, protectors, and everyday heroes all over the world. We're more than the #1 tools company. More than a driving force in outdoor power equipment. More than a global leader in industrial. We're visionaries and innovators. As successful as we've been in the past, we have so much further to go. That's where you come in. Join us! What's more, you'll get that pride that comes from empowering makers, doers, protectors, and everyday heroes all over the world. We're more than the #1 tools company. More than a driving force in outdoor power equipment. More than a global leader in industrial. We're visionaries and innovators. As successful as we've been in the past, we have so much further to go. That's where you come in. Join us! #LI-Hybrid #LI-MB1 We Don't Just Build The World, We Build Innovative Technology Too. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you'll get the unique chance to impact some of the world's most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights. Who We Are We're the World's largest tool company. We're industry visionaries. We're solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company. Benefits & Perks You'll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners. What You'll Also Get Career Opportunity: Career paths aren't linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths. Learning & Development: Our lifelong learning philosophy means you'll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities). Diverse & Inclusive Culture: We pride ourselves on being an awesome place to work. We respect and embrace differences because that's how the best work gets done. You'll find we like to have fun here, too. Purpose-Driven Company: You'll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices. EEO Statement: All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic. If you require reasonable accommodation to complete an application or access our website, please contact us at ************** or at accommodations@sbdinc.com. Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password. Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is seeking an Electrical Engineer, with strong background in the water-wastewater industry, to join our Resilience Water team in the Columbus, OH area. The primary focus of this role will be to provide technical and design consulting services with a focus on electrical power distribution, electrical controls, lighting, and communications, to support projects for the Water Division. Role accountabilities: This role will serve as Arcadis' main point of contact for clients' electrical needs and support projects and clients in the planning, design, and construction of water/wastewater facilities and similar industrial projects. This position will assist in developing project management skills, including managing project budgets, coordinating delivery schedules, and ensuring successful execution of scope, schedule, and budget. Other duties include: * Perform electrical design and coordination tasks with focus on power distribution, lighting systems, communication systems, fire alarm systems and control systems * Utilize CAD software (Autodesk and Bentley products) for electrical system design and documentation * Establish design criteria and perform design calculations * Develop electrical design documents including one-line diagrams, control schematics, electrical plans and specifications * Provide engineering services during construction, review equipment submittals and shop drawings and respond to contractor RFIs (Requests for Information) * Conduct field inspections to identify deviations from design and ensure safety compliance during construction * Perform electrical system analysis using tools such as ETAP, SKM Power Tools and other power systems analysis software * Travel as required to meet project needs Required Qualifications: * Bachelor's degree in Electrical Engineering, Electrical Engineering Technology, a related discipline or equivalent work experience. * Minimum of 5 years of relevant experience. * EIT or Professional Engineer (PE). Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $80,461 - $132,761. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RT4 #Resilience-NA #Water-NA #Water-NA-D&E #WaterJobsOhio

Job Type Full-Time Regular This role leads the design and delivery of Salesforce solutions across Field Service, Sales Cloud, and integrations with MuleSoft, SAP, and Power BI. It combines technical depth with mentoring and strategic alignment. Key Responsibilities: * Architect and implement Salesforce solutions using Apex, LWC, and Flow. * Lead integrations with enterprise platforms and third-party tools. * Support mobile app development and field service optimization. * Conduct code reviews, mentor developers, and ensure platform scalability. * Collaborate with business stakeholders to align solutions with operational goals. Qualifications: * 8+ years of Salesforce experience, including Field Service and CRM. * Certified Salesforce System Architect preferred. * Experience with CI/CD, DevOps, and tools like RingCentral, Gong, and Outreach. * Strong communication and mentoring capabilities.

Senior Electrical Engineer - Full Time We are looking for a Senior Electrical Engineer. The ideal candidate will have a strong understanding of electrical engineering principles and a minimum of 10 years of experience in the substation industry. Responsibilities of the Senior Electrical Engineer will include: Designing, installing, and testing electrical systems Providing technical support to customers and other engineers Overseeing the work of junior engineers Staying up-to-date on the latest electrical engineering trends Qualifications for the Senior Electrical Engineer position include: Bachelor's degree in Electrical Engineering Professional Engineer (PE) license preferred 10+ years of experience in the substation industry Strong understanding of electrical engineering principles Excellent communication and interpersonal skills Ability to work independently and as part of a team If you are interested in this position, please click onto the apply button. Thank you.

Electrical Engineer (Intermediate to Senior Level) Employment Type: Full-Time About Us Are you ready to take the next step in your career? LAPORTE, a consulting engineering firm with 25 years of experience and a strong presence in North America and Europe, is seeking an Electrical Engineer to join our growing team. With 25 offices and over 480 employees worldwide, we specialize in delivering innovative solutions for the pharmaceutical and food & beverage industries. At LAPORTE, we offer: Competitive Salary Comprehensive Benefits Compensatory Paid Time Off (PTO) A Flexible Work Environment that values work-life balance Opportunities for Professional Growth Join us and become part of a supportive, collaborative team that encourages creativity and efficiency every day. Key Responsibilities As an Electrical Engineer, you will lead and support electrical engineering requirements and construction packages for client projects. Manage and execute electrical design projects Load list development Conductor sizing Overcurrent protective device (OCPD) sizing Lighting and switchgear design Cost estimates and equipment specification Oversee facility electrical design aspects including low-voltage facility electrical distribution systems Backup systems, grounding, fire alarms, lighting controls, and security systems Collaborate with project teams while supervising and mentoring team members. Execute full lifecycle project support, including system design, troubleshooting, testing, and commissioning. Conduct site surveys and provide on-site support during installation. Ensure compliance with relevant codes and standards (NEC, IBC, NFPA 101, ASHRAE, IECC). Develop project deliverables using AutoCAD and Revit. Qualifications Education: Bachelor's degree in Electrical Engineering or Electrical Engineering Technology required. EIT certification preferred; PE licensure is optional but a plus. Experience Minimum of 5 years in manufacturing or consulting environments executing electrical power system design projects as a designer or design engineer. Technical Expertise: Proficiency in managing medium-scale electrical projects, including client coordination, system design, and bid package preparation. Experience with low-voltage (LV) systems design: lighting, fire alarm signaling, security systems, access control, etc. typical in MEP bid packages. Familiarity with distribution design: sizing/specifying equipment, conductors, and protection for LV/MV facility electrical distribution systems. Experienced with National Electrical Code, International Building Code, and other relevant building codes. Project Management Skills: Ability to schedule design/construction activities and estimate costs using software tools (MS Project). Software Knowledge: Experience with ETAP or SKM is a plus. Proficiency in AutoCAD and Revit is highly desirable. Additional Skills: Strong leadership and organizational abilities with a focus on relationship management. Ability to influence clients, suppliers, and peers to adopt engineering best practices. Flexibility to travel (10-20%) to external manufacturing sites for surveys and meetings. Why Join LAPORTE? At LAPORTE, we are passionate about engineering excellence. Our team thrives on collaboration and innovation while maintaining a strong commitment to work-life balance. If you're looking for a challenging yet rewarding role where your expertise will make a difference in cutting-edge industries like pharmaceuticals and food & beverage manufacturing-this is the opportunity for you! Apply Today! We're excited to meet you! Submit your application today to join the LAPORTE team and help shape the future of engineering solutions in our industries. #LI-Hybrid Send us your application today. We look forward to meeting you! The LAPORTE team

Job Type: Full time About Us: As a developer, manufacturer, and supplier of essential medicines, Hikma Pharmaceuticals USA Inc. and its affiliates' purpose is to put better health within reach, every day for millions of patients around the world. We are a trusted, reliable partner and dependable source of over 760 high-quality generic, specialty and branded pharmaceutical products that hospitals, physicians and pharmacists need to treat their patients across North America, the Middle East, North Africa and Europe. Through our global footprint of 30+ manufacturing plants, 8+ R&D centers, and 9,000+ empowered employees, we are committed to making high-quality medicines accessible to the people who need them. Description: We are committed to building a diverse and inclusive team and encourage applications from candidates of all backgrounds. We are seeking a talented and motivated Principal Engineer, Packaging - Technical Services to join our team. In this role, you will be responsible for transferring products [(Generic commercialization, Site Transfers, Buy-ins, Third Party & key lifecycle (Alt. API)] from R&D or partners to Operations, including leading packaging development, registration, site transfers, start-up of commercial production, and transfer to lifecycle support. Minimize and remove obstacles during development, product transfer, validation, and commercialization through utilization of risk-mitigation strategies, best practice sharing, and influence with R&D, Operations, and external colleagues. Support department management as group representative in technical and business meetings. Act as a technical subject matter expert and mentor for the Technical Services group and the site. Key Responsibilities: Demonstrate influence, leadership, and influential teamwork skills with development partners/customers during the packaging development and registration of site transfers and new product NDAs and ANDAs, ensuring that all project timelines are met. * Provide packaging engineering expertise , i.e. critical review, assessment, influence and strategy, for responsible projects assigned within Organic Launch, Business Development, Contract Manufacturing Organization (CMO), Alternate API, and targeted dormant products. * Create all associated master data for assigned projects. * Create all associated structure technical data for assigned projects. * Create all specifications required for the container/closure systems for assigned projects. * Create all associated aggregation/serialization requirements for assigned projects. * Attend all required team meetings to support assigned projects and ensure to achieve key milestone datas. * Perform all necessary line trials, including all necessary documentation such as protocols/reports/PO's, to support proper evaluation of form, fit, function of proposed container closure systems. * Support all regulatory audits as required. * Generate all required regulatory submission documents for assigned projects and provide support in generating responses to regulatory authorities. * Support other Technical Service Packaging Engineers with peer review; as well as, provide appropriate mentoring. * Influence and Collaborate with Purchasing to source new packaging components, if needed. * Interact with outside vendors to design new packaging components. * Influence and Liaise with Change Management to support packaging component changes. * Meet cGMP, FDA, DEA, OSHA and other applicable regulatory and company guidelines. * Influence and Liaise with Flow Packaging group to ensure consultation of launch projects for efficient transfer of applicable projects for life cycle transfer. * Drive continuous improvement activities for launched products through initial commercial production phase, until transfer of launched products to lifecycle support with Operations. Qualifications: We value the skills and experiences candidates bring to the table. While we have listed some qualifications below, we encourage candidates to apply even if they do not meet all of them: * B.S. degree in Chemistry, Engineering, Pharmacy, or related scientific discipline plus a minimum of 15 years of experience in pharmaceutical technology transfer, quality assurance, product development, packaging, or applicable pharmaceutical experience, or seven years of experience in product development, technology transfer, and/or packaging engineering in another technical field. * Alternatively, a M.S. degree in Chemistry, Engineering, Pharmacy, or related scientific discipline plus a minimum of 13 years of experience in pharmaceutical technology transfer, quality assurance, product development, packaging, or applicable pharmaceutical experience, or five years of experience in product development, technology transfer, and/or packaging engineering in another technical field. * Alternatively, a Ph.D. degree in Chemistry, Engineering, Pharmacy, or related scientific discipline plus a minimum of 10 years of experience in pharmaceutical technology transfer, quality assurance, product development, packaging or applicable pharmaceutical experience, or two years of experience in product development, technology transfer, and/or packaging engineering in another technical field. (Internship or co-op programs may qualify for work experience for those with Ph.D. degrees.) * Demonstrated ability to perform at expectations for the following Hikma competencies: Collaboration & Teamwork, Communication & Influence, Customer Focus, Planning & Organization, Taking Initiative & Drive For Results. * Expert knowledge and understanding of applicable laws and regulations regarding development and packaging of pharmaceuticals, including cGMP, DEA, and FDA guidances. * Demonstrated technical knowledge of pharmaceutical packaging environment and equipment with emphasis on scale-up/ optimization and validation for various dosage forms (e.g. modified/extended release, nasal suspensions, soft gels, bead/pellet coated products, film coated products, and/or novel delivery systems). * Experimental Methodology: Subject Matter Expertise in experimental methodology and ability to design complex experiments to support pharmaceutical packaging development. Proficiency in the use of statistical software for experimental design and analysis is preferred but not required. * Critical Thinking/Complex Problem solving: Ability to apply the PDCA principles (plan, do, check, act) and develop solutions for a variety of problems. * Computer Skills: Expert computer skills with the ability to enter data into and retrieve information from various software programs such as Microsoft Office (Work, Excel, PowerPoint, and Outlook) and SAP. * Mentoring / Coaching: Strong ability to coach and/or mentor both in and out of reporting structure (e.g. mentoring junior Process Engineers, providing guidance to production Coaches and Technicians regarding optimization opportunities). Preferred Qualifications: * 10+ years commercial molding experience * Experience with systems such as SAP, TrackWise, Veeva or a Manufacturing Execution System (MES). What We Offer*: * Annual performance bonus, commission, and share potential * Auto enrollment in a Hikma-sponsored 401(k) program at a pre-tax contribution rate of 3% of eligible pay. Hikma will match 100% of the first 6% of eligible pay that you contribute * A generous paid time off (PTO) bank starting with 20 days (prorated based on hire date). Additional days granted upon reaching work milestone anniversaries * 3 personal days (prorated based on hire date) * 11 company paid holidays * Comprehensive benefits including health, dental, vision, mental health, disability, life insurance, prescription drug coverage, and a variety of voluntary benefits * Employee discount program * Wellbeing rewards program * Safety and Quality is a top organizational priority * Career advancement and growth opportunities * Tuition reimbursement * Paid maternity and parental leave * Eligibility requirements apply to some benefits and depend on the job classification, role, and length of employment. Benefits are subject to change as well as specific plan or program terms. Recruiters: Please note that Hikma has a set roster of approved recruiters for specific roles agreed to in advance and does not accept unsolicited resumes or calls from third-party recruiters or employment agencies regarding open positions. In the absence of a signed agreement and approval from Hikma's Human Resources department to submit resumes for a specific position, Hikma will not approve, nor will be under an obligation to make, any payment to such non-approved third-parties in the event a candidate they refer is hired by Hikma. Equal Opportunity Employer: Hikma Pharmaceuticals USA Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law. #LI-KJ1 Location: Columbus, OH, US, 43228 Nearest Major Market: Columbus

Job Level: Mid Level Home District/Group: Kiewit Power Delivery Department: Design Engineering Market: Power Employment Type: Full Time We are looking for a Protection & Control (P&C) Engineer to support the design and engineering of greenfield and brownfield substation projects ranging from 12 kV to 500 kV. This role focuses on developing the full suite of P&C deliverables that ensure safe, reliable, and coordinated operation of high voltage substations. District Overview Kiewit Power Delivery is a full-service engineering and construction solutions provider operating across North America. Our experience and expertise span all aspects of the transmission and distribution market from high voltage overhead and underground transmission to distribution and automation design and construction capabilities. With these broad capabilities, we operate in the electric utility, renewable energy, industrial, and oil, gas markets. As part of Kiewit, we are integrated with 135 years of construction and engineering experience that provides holistic solutions, differentiating our team from the rest of the industry. Our rapidly growing power delivery business has opened new locations across North America to strengthen our market presence while executing work within the communities that we live. We have invested in industry leading design technology and platforms while also expanding our construction equipment fleet with the most advanced, and safest equipment on the market. We are committed to building upon our history as one of the safest companies to work for by equipping our craft with the best tooling and safety programs available. We are an innovative team that prides itself on continuous improvement and always delivering on our commitments to our clients and ourselves. Our staff collaborates with Kiewit's vast internal network of resources that span heavy civil and infrastructure, vertical and commercial buildings, mining, as well our oil and gas and power generation markets, to drive safe and cost-effective solutions that achieve client expectations and further Kiewit's legacy of excellence. Location This position is based out of our office in Columbus, OH. Responsibilities * Develop one line and three line diagrams that define project scope, equipment configuration, and protection philosophy. * Create detailed AC and DC schematic diagrams, including control circuits, tripping schemes, metering, and auxiliary power systems. * Design and review wiring diagrams, panel layouts, and interconnection drawings for relays, RTUs, communication equipment, and station devices. * Perform P&C related engineering calculations such as CT/PT sizing, DC load calculations, breaker duty checks, and protection coordination studies. * Support development of relay settings, logic diagrams, and configuration files for microprocessor based relays. * Assist with RTU/SCADA configuration, point lists, and communication interface requirements. * Collaborate with civil, structural, and physical electrical design teams to ensure integrated and constructible substation designs. * Provide technical support during procurement, installation, testing, and commissioning. Qualifications * Bachelor's degree in Electrical Engineering or related discipline. * 5-7 years of experience with substation protection and control design for utility or EPC projects. * Familiarity with relay setting software (e.g., SEL AcSELerator, GE Enervista) and RTU/SCADA configuration tools. * Understanding of NERC, IEEE, and utility specific protection standards. * Strong attention to detail and ability to interpret complex electrical drawings. #LI-RF1 Working Conditions Insert here Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. * May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

A reputable engineering firm is seeking an Electrical Engineer with a focus on Water\/Wastewater projects to join their growing team in Columbus! Responsibilities: Plan production for industrial (water\/wastewater) and environmental facilities Coordinate design elements with other in\-house disciplines (architecture, structures, environmental, site civil, and landscape design) Define equipment, layout, and protection requirements for new and retrofit distribution stations in accordance with all applicable industry codes and standards Communicate with clients to determine requirements then develop appropriate distribution station plans\/specifications Collaborate with cross\-disciplinary teams on system layout, SCADA controls, automation, and instrumentation Prepare electrical calculations for power distribution (low\/medium voltage), lighting, controls, and fire alarm systems Requirements: A bachelor's degree in electrical engineering (ABET\-accredited preferred) or equivalent work experience 5+ years of experience Water\/wastewater treatment experience preferred Professional Engineer (PE) license preferred (or the ability to obtain it within 12 months of hire) Working knowledge of power distribution (low and medium voltage), standby power systems, instrumentation, controls, lighting, and fire alarm systems Familiar with ICC, NEC, NFPA building codes, LEED building standards Proficient with AutoCAD and Revit design software Proficient with MS office suite (Word, Excel, Outlook) Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! **************************************************************** ************** "}}],"is Mobile":true,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"37675481","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"47524"},{"field Label":"Location","uitype":1,"value":"Columbus"},{"field Label":"Industry","uitype":2,"value":"Consulting"},{"field Label":"City","uitype":1,"value":"Columbus"},{"field Label":"State\/Province","uitype":1,"value":"Ohio"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"43085"}],"header Name":"Electrical Engineer","widget Id":"2**********0059050","is JobBoard":"false","user Id":"2**********0736174","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"2**********3940813","FontSize":"12","google IndexUrl":"https:\/\/harrisonconsultingsolutions.zohorecruit.com\/recruit\/ViewJob.na?digest=8DY.bVOboIBo7ZJhQVLAWLvHoc4bAyDamUSD7bLQFLw\-&embedsource=Google","location":"Columbus","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"3cgkl37b76de065e24115963f6b2941ca7d80"}

Electrical Engineer We are an Ohio based mechanical and electrical consulting engineering firm with offices in North Royalton and Columbus established in 1993. We are seeking a full-time electrical engineer or electrical designer with at least 3 years of experience to support the growth and expansion of our business. The position would start as a "electrical engineer/designer" and potentially progress over time to "project manager” or “project engineer." A brief description of the position is as follows: Responsibilities: • Position will involve electrical design for commercial, office, retail, healthcare, and other project types. • Apply design knowledge in power distribution, grounding, lighting, control systems, and equipment specifications and selections. • Preparation of schematics for various systems. • Collaboration with all disciplines to achieve completed coordinated design and reviewing the work of others. • Performance of on-site investigation to confirm existing conditions. • Developing familiarity with current electrical codes and standards. • Forming relationships with equal level personnel of other disciplines (architectural, electrical, structural civil, etc.) and manufacturing sales representatives. • Becoming familiar with and preparing general and electrical specifications. Skills & Abilities: • Interpersonal skills to work effectively with others. • Familiarity with system specific materials, components, and systems. • Basic knowledge of high mathematics relative to the work. • Oral and written communications skills. • Analytical ability to solve complex problems. • Working ability/knowledge of AutoCad. • Working ability/knowledge of REVIT is not required, but desired. We operate in an open and collaborative space that allows for an environment where ideas are freely exchanged, solutions are created, and proposals become reality. Even though the pace is fast, we do what we can to maintain a respectful, cooperative spirit throughout the office that considers schedules, work habits, personal priorities, and “space”. Additional benefits include the following: • 401(k) with Safe Harbor contribution of 3% of salary • Full coverage of Health insurance in Medical Mutual SuperMed PPO Network • Paid time off including vacations and holidays. Our staff has worked on award-winning projects around the country with some of the most dynamic architects and design firms. Even with a more relaxed atmosphere, our team members work hard and enjoy learning and advancing in this industry. We offer many opportunities for personal and career advancement. Continuing education, professional societies, trade fairs and manufacturer visits are encouraged and supported. Please consider a position with us as you investigate a change in your existing situation.

Arizona - Remote; Arkansas - Remote; Baton Rouge, LA; Colorado - Remote; Colorado Springs, CO; Dallas, TX; Denver, CO; Des Moines, IA; Fayetteville, AR; Florida - Remote; Fort Worth, TX; Georgia - Remote; Idaho - Remote; Indiana - Remote; Iowa - Remote; Joplin, MO; Kansas - Remote; Kansas City, MO; Kentucky - Remote; Lincoln, NE; Little Rock, AR; Louisiana - Remote; Loveland, CO; Michigan - Remote; Mississippi - Remote; Missouri - Remote; Montana - Remote; Nebraska - Remote; Nevada - Remote; New Hampshire - Remote; New Mexico - Remote; North Carolina - Remote; North Dakota - Remote; North Kansas City, MO; Ohio - Remote; Oklahoma - Remote; Oklahoma City, OK; Omaha, NE; Overland Park, KS; Phoenix, AZ; South Dakota - Remote; Tennessee - Remote; Texas - Remote; Tulsa, OK; Utah - Remote; Virginia - Remote; West Virginia - Remote; Wisconsin - Remote; Wyoming - Remote **Company Description** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** We are seeking an Electrical Engineer Expert to join our Data Center team and serve as the subject matter expert on hyperscale, mission-critical campus and facility electrical systems. This role is ideal for someone who thrives in a fast-paced, ever-evolving environment and is passionate about supporting project teams with deep technical expertise. You will be the go-to resource for electrical design strategy, QA/QC oversight, and technical mentorship across high-impact data center projects. Your work will directly influence the reliability, scalability, and innovation of our electrical systems supporting hyperscale clients. **Key Responsibilities** + Serve as the technical lead for electrical systems in hyperscale and/or colocation data center projects, including power distribution, switchgear, UPS systems, and emergency power. + Provide expert-level guidance on design standards, code compliance (NEC, NFPA, IEEE), and commissioning protocols. + Collaborate with project managers, engineers, and external partners to ensure technical excellence and alignment with client goals. + Mentor and support engineering teams, offering technical reviews, troubleshooting, and strategic input. + Lead QA/QC processes and ensure all deliverables meet the highest standards of quality and reliability. + Stay current with emerging technologies and trends in mission-critical infrastructure and integrate them into project strategies. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills. + Ability to contribute and work well with a team. + Excellent interpersonal and problem-solving skills. + Bachelor's degree in Electrical Engineering and PE License + 12+ years of experience in electrical engineering with a focus on hyperscale data centers or mission-critical facilities. + Proven ability to lead technical design efforts and support multidisciplinary teams. + Strong understanding of medium and low voltage systems, redundancy strategies, and commissioning practices. + Excellent communication and collaboration skills. + Passion for mentoring and developing engineering talent. \#LI-DD1 Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range $150,000-$236,000USD **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Job Title: Electrical Designer Overview: We are seeking an experienced Electrical Designer to join our team in the Columbus area with pay starting at 80K. The ideal candidate will have a strong background in electrical design and be able to work on projects from concept to completion. Responsibilities: Design electrical systems for various projects, ensuring compliance with industry standards and regulations. Create and review technical drawings, specifications, and reports related to electrical design. Collaborate with the engineering team to ensure project requirements are met. Provide technical support during project execution and troubleshoot any electrical issues that may arise. Stay updated on industry trends and advancements in electrical design technology. Requirements: Bachelor's degree in Electrical Engineering or related field. Proficiency in CAD software and other electrical design tools. Strong knowledge of electrical codes, standards, and regulations. Excellent communication and teamwork skills. Ability to manage multiple projects simultaneously. Employment Type: Full-time If you are a detail-oriented Electrical Designer looking to contribute to exciting projects, we would love to hear from you. Apply now to join our dynamic team!

CAI seeks DC Services Electrical Commissioning Engineers with a minimum of five to seven years' experience in Data Center Commissioning to support development and execution of all electrical aspects of commissioning projects. Position Description:This position supports development and execution of all electrical aspects of assigned commissioning projects from initial engagement, design reviews, checklists, safety support, script development, vendor coordination, testing and report development through turn over to the client. The Electrical Commissioning Engineer will support the development of the electrical test schedule, finalize electrical test procedures, review project submittals for consistency with the design intent, basis of design and the owner's project requirements, and maintain project cadence for electrical systems testing and associated Building Automation Systems. The Electrical Commissioning Engineer is to support the planning and execution of commissioning for the electrical infrastructure of the mission critical facility. They will be expected to execute against the project schedule through the coordination of contractors and/or vendors to complete the desired electrical systems testing. CAI DC Electrical Commissioning Engineer will be exposed to cutting edge technologies in the Hyperscale and other spaces. You will have an opportunity to work with recognized subject matter experts allowing YOU to be a key player in bringing data technologies to market. As part of our company culture, we invest in YOUR future, and commit to hands on certifications as well as professional training. Our collaborative culture ensures that our customers benefit from exemplary work across our entire range of professional services. Responsibilities:Support all aspects of safety for all electrical tests.Support complete commissioning and performance acceptance testing of the electrical infrastructure systems.QA/QC of all electrical test procedures.Provide input and insight to the overall commissioning plan.Develop reports for the electrical commissioning engineers and contribute to a daily report to the Commissioning Project Manager.Attend and be an active participant of customer equipment Factory Witness TestAssist with vendor coordination and management.Perform equipment inspection to ensure build adherence to vendor submittal.Provide test documentation that equipment is delivered, installed, and tested correctly and set to function properly for the customer.Support and perform design specification review, manufacturer submittals, one line drawing sets, and project schedule documentation.QA/QC of electrical equipment installation\startup Execute test scripts to confirm equipment and system operation to design specification.Ensure safe work practices are followed by all on commissioning team and customer site.Engage with customers to ensure a positive experience, goals achievement, and schedule adherence.Provide daily reports for electrical commissioning team status.Conduct facility walk downs, turnover, and punch list reviews.General understanding of LEED specifications and requirements.Look for new opportunities for CAI to provide service and value to customer.Duties may be increased as experience and skill allow. Requirements include:Position Requirements: Bachelor's degree or equivalent experience Minimum of five to seven years Data Center Commissioning experience.Knowledge of OSHA and NFPA 70E safety requirements.Good written and spoken communication skills.Ability to read and interpret electrical schematics and specifications.Knowledge of data center design concepts.Knowledge and commissioning experience with Electrical Distribution Switchgear, Substations, Uninterruptable Power Supplies (UPS), Automatic Transfer Switches (ATS), Batteries, Emergency Diesel Generators & Load Banks.Knowledge of power quality analysis. Strong experience with Word, Excel and PowerPoint. Ability to effectively write electrical commissioning scripts, daily reports, and final commissioning reports. Other Requirements: Excellent oral and written English is required Extensive travel may be required (75%) Candidates must have a Passport or the ability to immediately get a Passport.Work under construction site conditions Able to work in the US without sponsorship now or any time in the future. About CAICAI is a 100% employee-owned company established in 1996, that has grown year over year to more than 800 people worldwide. We provide commissioning, qualification, validation, start-up, project management and consulting services related to operational readiness to FDA regulated and other mission critical industries. Are You Ready?Our approach is simple; we put the client's interests first, we do not stop until it is right, and we will do whatever it takes to get there.As owners of CAI, we are committed to living our Foundational Principles, both professionally and personally:We act with integrity We serve each other We serve society We work for our future With employee ownership, one person's success is everyone's success; we work diligently to accomplish team goals. We place Team Before Self, demonstrate Respect for Others, and possess a can-do attitude. That is how we have grown exponentially. BenefitsOur full-time positions offer competitive compensation and benefits which include: up to 15% retirement contribution, 24 days PTO and 5 sick days per year, health insurance at extremely low cost to employee, financial support for both internal and external professional education as well as 70% long term disability paid for by the company.#LI-MV1 #MISSIONCRITICALAverage salary range, not including benefits or compensatory time and possible discretionary bonuses. CAI Benefits:•Comprehensive Health Insurance coverage•24 days of Paid Time Off•ESOP/401K - 15% Company Contribution (US Only)•Company paid Life Insurance•Company paid Long Term DisabilityWe are an equal opportunity employer; we are proud to employ veterans and promote a diverse culture in our workplace. Diversity is a strength for our global company. We pledge that CAI will be operated in a way that is fair and equitable to all - our employees, our customers, and the broader society. This job description is not all inclusive and you may be asked to do other duties. CAI will also consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the FCO. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Electrical Engineer will contribute to the release of new, best in class Chiller and CW Systems products; will work in a cross-functional development group; manage a variety of tasks and activities in a dynamic environment; and solve complex problems where no precedence exists. Will provide direct support of our manufacturing teams, analyze manufacturing issues, report findings back to the electrical engineering team, and support implementation of solutions. Responsibilities: Design next generation Chiller and computer room cooling products designed for air and liquid cooling systems Collaboration across the disciplines of mechanical engineering, electrical engineering, process engineering, as well as production and offering teams. Work with these teams for design reviews, meeting cost metrics, and brainstorming around customer pain points. Performs a variety of engineering calculations using traditional engineering methods to verify design requirements Develops solutions to complex problems where little or no precedence exists - the use of ingenuity and creativity is regularly required Participate in identification of cost reduction opportunities and in the design and development of cost reduction changes Implement product changes to solve field issues, support service department Component verification Support manufacturing facilities with prototypes, testing, sustaining and cost reduction activities Support lab facilities with prototypes and testing Be familiar with design solutions connected with EMC, Harmonics and Power Factor correction on industrial products Create and revise unit wiring schematics and network connection drawings Create and review electric panel layouts following relevant codes and standards Create and revise wire harnesses Work with software team to develop and verify product controls solutions Requirements: Bachelor of Science Degree in Electrical Engineering (BSEE) or related degree from an accredited college or university 3+ years of career experience in new product development as an individual contributor Familiar with HVAC design or an industrial design of a similar nature Ability to work and multi-task in a fast-paced environment independently and as a member of a dynamic team; offer and receive constructive criticism Demonstrated history of delivering quality products to market with understanding and respect for phases of the product development process Excellent project management skills and communication skills, both written and verbal Proficient in 3D CAD software, preferred CREO 4.0 and greater Knowledge of NEC (NFPA70), IEEE 519, UL 508A SB, UL60335-2-40, or equivalent CSA/UL standards VFD programming and troubleshooting experience Experience with communications and interconnects standards and protocols including RS485, CAN, and Ethernet The anticipated salary range for this role in the MN locality is between $92,000 to $126,500 per year (based on a 40-hour work week)]-salary ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to receive and/or participate in profit sharing, allowances, travel and/or car expenses, and earn sales incentives based on revenue or utilization depending on the terms of the employee's role and individual offer details. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES • Customer Focus • Operational Excellence • High-Performance Culture • Innovation • Financial Strength OUR BEHAVIORS • Own It • Act With Urgency • Foster a Customer-First Mindset • Think Big and Execute • Lead by Example • Drive Continuous Improvement • Learn and Seek Out Development About Vertiv Vertiv is a $8.0 billion global critical infrastructure and data center technology company. We ensure customers' vital applications run continuously by bringing together hardware, software, analytics and ongoing services. Our portfolio includes power, cooling and IT infrastructure solutions and services that extends from the cloud to the edge of the network. Headquartered in Columbus, Ohio, USA, Vertiv employs around 20,000 people and does business in more than 130 countries. Visit Vertiv.com to learn more. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************.

Join Rimkus and unlock your potential with endless opportunities for growth, learning, and making a difference! Rimkus (*************** is a worldwide leader in engineering and technical consulting. Rimkus experts specialize in building envelopes, engineering, forensic consulting, dispute resolution, construction management services, and solutions built for the environment. NOW IS THE TIME to join this growing and stable company! We offer our full-time employees a competitive salary, bonus opportunities, and a comprehensive benefits package that includes medical, dental, vision, life insurance, disability coverage, employer-matching 401(k) plans, and opportunities for advancement. Overview Our electrical engineer provides forensic consulting services requiring electrical engineering expertise for insurance, legal, industrial, and other clients. Assesses and determines the cause and origin of electrical failures and damages. Provides oral and written reports of findings and, when needed, provides expert testimony. ESSENTIAL JOB FUNCTIONS: Performs the investigation and analysis within the field of electrical engineering based upon a scope of work and budget prepared by the consultant and agreed upon by the client before performing the work to resolve claims and legal matters. Field Investigations: Study and determine the cause and origin of electrical system defects and electrical equipment failures. Preparation of oral and written reports to document the causes of failure, the extent of loss, the associated repair scope, and recommended remediation is essential. Provides opinions and expert testimony in litigation matters. Manages multiple projects, coordinating with other experts and supporting as needed to produce client reports promptly. Ensures that Rimkus policies and procedures are followed, including safe work requirements. Uses electrical engineering equations, applications, and figures to perform analysis. Follows land use laws and regulations. Ability to initiate, develop, and maintain mutually beneficial client relationships. Includes gathering photographic evidence, conducting investigations to document on-site conditions, overseeing field testing, and reviewing historical documentation. Uses cameras, microscopes, electrical testing equipment, and digital imaging techniques to document conditions in the field and in the lab. REQUIRED EXPERIENCE, EDUCATION, and CERTIFICATIONS: B.S. Electrical Engineering required. P.E. license is required. 2-10+ years of experience. Field experience is highly preferred. Depending on location, other licenses or certifications may be required. Valid driver's license and reliable form of transportation. REQUIRED SKILLS AND ABILITIES: Must have a high level of analytical skills. Work requires continual attention to detail with the ability to define problems, collect data, establish facts, and draw valid conclusions. Must be able to interact and communicate with clients at all levels (e.g., internal and external). Must know a variety of computer software applications, including but not limited to Microsoft Office applications and computer-assisted engineering and design software. Ability to read, analyze, and interpret standard scientific and technical reports or journals, financial reports, and legal documents. Ability to write scopes of work, budget estimates, schedules, reports of findings, proposals, general correspondence, and other technical documents. Ability to respond to inquiries from internal and external clients. Capable of effectively presenting information to top management, clients, public groups, and/or boards of directors. Climb ladders, walk on roofs, and enter and work in confined spaces. Shovel fire debris, move furniture, and other household/commercial items. Operate lifts. PHYSICAL DEMANDS, OVERTIME, and TRAVEL Physical Demands-Work will be performed in both office settings and at various outside locations (e.g., clients' offices, industrial, construction, and/or residential sites). The employee is frequently required to stand, walk on sloped roofs, sit, climb ladders, bend, climb inside attics, crawl under homes and tunnels, balance, stoop, kneel, crouch, talk, hear, and drive a motor vehicle to job sites. Employees may lift and/or move up to 50 pounds. The employee must be sharp, focused, and alert when conducting site inspections, speaking and interacting with clients, preparing written reports of findings, and testifying in deposition or trial. Clear vision and depth perception are also necessary. Overtime-This position is classified as salaried with an exempt FLSA status. Regular working hours are 8:00 a.m. to 5:00 p.m., Monday through Friday, with a one-hour lunch break. There will be periods when overtime will be required, which the employee must comply with to meet the demands of the position. Travel Requirements-This position requires up to 25% travel. Some out-of-area and overnight travel may be required. At Rimkus, we value a diverse and inclusive workplace where all employees feel valued and respected. We are committed to creating a work environment that supports and celebrates the unique perspectives and experiences of all employees. If you share our commitment to diversity and inclusivity and are excited about joining a welcoming and supportive team, we encourage you to apply for our open positions. Rimkus is an Equal Employment Opportunity (EEO) Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, disability, or protected veteran status. THIS JOB DESCRIPTION IS SUBJECT TO CHANGE AND DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT OR A GUARANTEE OF CONTINUED EMPLOYMENT. #LI-JD1 #LI-HYBRID

Veregy is an award-winning NAESCO-Accredited decarbonization company focusing on accelerating and simplifying the Energy Transition. We provide turnkey engineering and construction services designed to reduce our clients' energy and operating costs through the implementation of energy efficiency and infrastructure upgrades, smart building technology, fleet EV infrastructure, clean energy generation, and sustainability. Do you want to be part of a TEAM who delivers Eco-Friendly Environments that Transform Lives? Then you are in the right place…start the application process today! Summary of Position Functions The Controls Engineer will quickly gain an understanding and working knowledge of Veregy's technology products and building automation systems. The engineer will utilize this understanding to design, implement, and optimize building automation systems that control various commercial systems including HVAC, lighting, access control, etc. The engineer will optimize control sequences to reduce energy consumption and increasing facility wide energy efficiency. The engineer will also be responsible for managing project implementation which may include managing sub-contractors, project scheduling, progress reporting, and budget management. Essential Position Functions Assist with and manage building automation implementation projects by leading progress meetings, supervising subcontractors, ordering material, and managing budgets. Assist engineering and project teams with design, programming, and commissioning of building automation systems Write and optimize building automation control sequences to reduce energy consumption in increase facility efficiency Assist project teams with the creation of design and construction documents as they relate to building automation systems and other Veregy technology products Troubleshoot low voltage circuitry in the field and verify functional requirements are met Respond to and rectify customer issues or occupant comfort complaints in a timely manner Experience in project management. Strong analytical skills and problem-solving capabilities. Detail-oriented multi-tasker. Excellent written, verbal, and diplomatic communication skills. Strong collaborative skills; ability to collaborate with other engineers to methodically solve complex problems. Outgoing, energetic self-starter. Proficient in Microsoft Office products and experience with at least one CAD software. Experience with Honeywell, Distech, JCI, or other Commercial Building Automation Systems. Experience with Tridium/Niagara preferred. Educational/Certification Requirement Bachelor of Science in Engineering - Mechanical, Electrical, or Software. Required Experience 5 + years in building automation system design and implementation. Project management experience. Work environment This position requires work to be accomplished in both an office and field/construction environment. Physical demands This position requires sitting for periods of time at a computer with the freedom to walk around office when necessary; occasional phone, copy machine, and other office machine use; participate in teleconferences using a headset/earpiece, and lifting to 50 lbs. as needed. Travel required May require some travel. Other duties Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Benefits Competitive Compensation. Paid Holidays, Paid Sick Leave, and Paid Time Off. Competitive Medical, Dental and Vision Plans. 401k Retirement Plan with Matching Employer Contributions (%). Employer Sponsored Life Insurance and AD&D Insurance. Employer Paid Short- and Long-Term Disability Insurance. Continued Education and Trade Certification Sponsorship (Specific Positions). Applicants must be currently authorized to work in the United States on a full-time basis. Applicants must be currently authorized to work in the United States on a full-time basis. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunity has been, and will continue to be, a fundamental principle at Veregy, where employment is based upon capabilities and qualifications without discrimination because of race, color, religion, sex, age, national origin, disability, veteran status, genetic history, sexual orientation, or any other protected characteristic as established by law.

Job Description Controls Engineer Company: JSET Automated Technologies About Us JSET Automated Technologies is a fast-growing company specializing in Building Management Systems (BMS) and Electrical Power Monitoring Systems (EPMS). We design, build, and commission reliable, code-compliant systems for data centers and other mission-critical environments. Our team values hands-on learning, precision, and collaboration, giving every employee the opportunity to make an immediate impact. What You'll Do Support the successful delivery of EPMS projects under the direction of a Project Engineer Develop Ignition/EPMS applications based on technical documentation or customer specifications Configure, program, and test CodeSys (WAGO) controllers to meet project requirements Integrate and troubleshoot communication protocols such as Ethernet/IP, Modbus, and BACnet Assist with commissioning activities to ensure system reliability and compliance Act as a technical subject matter expert during customer and vendor meetings Analyze and resolve system issues in live, mission-critical environments Maintain accurate project documentation in Procore Follow all site safety requirements and best practices What You'll Bring Bachelor's degree in Electrical Engineering, Computer Science, Systems Engineering, or a related field Strong experience in Ignition design, development, and deployment Hands-on experience with CodeSys programming for WAGO PLCs Working knowledge of industrial communication protocols (Modbus, Ethernet/IP) Familiarity with control panel layouts, wiring diagrams, and electrical schematics Proficiency in Microsoft Office (Word, Excel, Project) Strong communication skills and attention to detail Ability to work independently and within a project team Preferred Qualifications Ignition Core or Gold Certification Experience with Python scripting or SQL integration Prior work experience in data centers or other mission-critical facilities Understanding of SCADA architecture and design standards ITAR-compliant work status (preferred) Why Join JSET Competitive compensation with bonus potential 401(k) with employer match Health, dental, and vision insurance Paid time off and professional development support A collaborative team focused on growth, quality, and long-term success Take the next step in your career - join JSET Automated Technologies and help build smarter, more reliable systems. Applicants must be currently authorized to work in the United States on a full-time basis. We are not able to sponsor or assume sponsorship of employment visas now or in the future for this role. As a condition of employment, all employees must complete a background and drug screening

Lumenance is seeking a full\-time engineer to develop (3D + 2D CAD) wire harnesses, junction boxes, and related electrical components and sub\-systems for our client in the commercial vehicle market. This is a contract\-to\-direct position with a growing manufacturer. JOB SUMMARY Designs new, high voltage electrical distribution systems (EDS), low voltage wiring harness products and makes improvements to existing products. Evaluates products and processes for cost efficiency and reliability. Works with other members to ensure that production is completed in a timely manner. Ensures that products, processes, and documentation conform to specifications and customer requirements. RESPONSIBILITIES \•\\tDesigns electrical distribution system (EDS) products to meet all customer requirements and internal design standards, including high voltage wiring and smart junction boxes. \•\\tDesigns high Voltage Cables and Connectors and work directly with their suppliers \•\\tDesigns low voltage wiring harnesses and battery cables \•\\tGenerates a Bill of Material (BOM) and prints for product designs. \•\\tCoordinates with Sales, Purchasing, and Manufacturing to assess product and processing costs and ensure that program cost targets are achieved. \•\\tCoordinates 3D designs to package components and create schematics \- has full design responsibility. \•\\tDefine retention, convolute, tapes. \•\\tProvides proposals on cost/weight reduction to enhance productivity. \•\\tCoordinates all program status review meetings, design review meetings, and harness trial builds with customer, manufacturing, and purchasing. \•\\tAttends customer meetings and build events. \•\\tMaintains a program open issues list to track all issues (i.e., design, system, manufacturing, purchasing, and customer) which are related to the program. \•\\tReviews the open issues list with the customer, manufacturing, and purchasing. \•\\tCoordinates program timing, PPAP, and master sample reviews. \•\\tSupports future business opportunities by working closely with the Sales, Purchasing, and Manufacturing groups. WORKING CONDITIONS \•\\tGeneral Engineering Office Environment, or potential remote work from home (for right experience) \•\\tTravel to customer and occasional travel to plants Requirements\• 5+ years of experience in engineering or a related technical area \• Engineering degree in a relevant discipline \•\\tExperience designing new high voltage wire harness and cable assemblies \•\\tExperience designing smart junction boxes, including routing and wire gauge selection \•\\tDemonstrated knowledge of vehicle electrical systems, understanding of engineering/technical requirements and standards. \•\\tKnowledge of automotive (or similar transportation industry) component development and production processes, wire harness assembly processes, wire harness components \•\\tComputer Aided Design (CAD) systems (CATIA) \- preferably CATIAV6 \•\\tDesign Failure Mode Effects Analysis (DFMEA). \•\\tProficiency in using MS Excel, Outlook, PowerPoint, and Word also recommended

Momentive Technologies applies advanced materials science to design and manufacture ultra-high-performance quartz materials, quartz crucibles, and ceramic products that are vital to a variety of high-growth end markets, including the silicon and compound semiconductor industries, electronics, and aerospace components. These solutions enable the production of logic and memory chips, power control devices and multiple systems for electric vehicles, integrated circuits, power control devices, data servers, and aerospace applications. Recognized for the purity, performance, consistency and stability of its products, Momentive Technologies has been delivering innovative solutions for over 130 years and continues to impact emerging trends like electrification, digitalization, renewable energy and artificial intelligence. The Company, headquartered in Strongsville, Ohio, has operations across the globe and serves customers in more than 30 countries. For more information, visit ********************** Electrical Engineer Job Summary The Electrical Engineer provides technical support for the processes and equipment used in the manufacturing operations. This position will be involved in planning, designing, and leading the implementation of equipment replacements and process improvements. The position will be involved in the development of Maintenance Technicians with the equipment and process improvements. Responsibilities Provide technical support and be directly involved in troubleshooting of existing equipment and systems. Generate documentation as needed including work instructions, SOPs, and control plans in addition to making appropriate changes to other documentation as needed Development of Maintenance Technician skills on existing and new equipment and processes. Support Continuous Improvement projects and Capital Expenditures. Basic Qualifications: BSEE (Electrical) with mechanical experience. Knowledge of electrical manufacturing processes. Understanding of electrical engineering codes and safety standards. 5 years of relevant experience in a manufacturing setting. Leadership experience. Ability to manage multiple projects. Ability to work independently as well as in a team environment. Self-motivated, innovative, creative, and resourceful. Knowledge and experience with Low and Medium Voltage Switchgear. Knowledge and experience with Allen Bradley and/or GE PLCs. Preferred Qualifications: Vendor management Understanding of lean manufacturing Key Relationships: Reports to the Maintenance and Facilities Manager Operations, Engineering Team, Continuous Improvement team, Technicians. Travel Requirements: Up to 10% Working Conditions: Full-time Onsite, manufacturing plant Office-based Ability to stand or walk for extended periods during audits, inspections or site visits Ability to lift and carry items up to 25 lbs ****Our Electrical Engineer will earn variable compensation including base salary and bonus. Base salary range takes into consideration experience, education, and training. Not to mention all the amazing benefits available for employee selection as well. Joining the Momentive team includes: Medical/Prescription Drug Coverage Dental Coverage Vision Coverage 401(k) plan with Company Match Basic and Voluntary Life/AD&D Insurance Short- and Long-Term Disability Insurance Employee Assistance Program Wellness Program Tuition Reimbursement Employee Referral Program Momentive Technologies is not just shaping materials; we're shaping the future. As a leader in the fused quartz, ceramics, and crucibles industry, we pride ourselves on innovation, precision, and excellence. When you join us, you'll be part of a dynamic team that's driving advancements in technology, research, and applications across various sectors. EEO Statement We treat all our associates and candidates as equals. We require all associates and managers to do so too and comply with employment laws and regulations. All personnel actions are conducted in the spirit of equal employment. We are committed to recruit, train, promote and retain associates without regard to race, color, religion, gender, gender identification and expression, national origin, marital status, age, disability, genetic information, military status, sexual orientation, or any other characteristic protected by applicable local, state or federal laws. Accessibility Guidelines We are committed to making the on-line application experience easy and accessible to individuals with disabilities. We are constantly making improvements to comply with the spirit of the "Americans with Disabilities Act," and the Web Content Accessibility Guidelines. If any of the information on the website is not accessible to you due to a disability, please contact us via phone at **************. Please provide the location of the inaccessible information and the format you wish to have the information presented and we will be happy to send it to you, either via your email address or a separate mailing address you provide. If you prefer, you may contact us and we will be happy to assist you with the application process.