Leadman jobs near me - 30 jobs

Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work for, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role As the PSD USAC Channel Leader, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: Design and implement a comprehensive channel strategy to achieve sales growth and market share targets in alignment with the Global Industrial Channel. Strategy creation for churn win-back Co-negotiate on channel deals to accelerate conversion capture Drive accountability for revenue growth in partnership with matrix partners Drive accretive top line growth leveraging all channels (GIC and Division-centric). Ensure all NPI's, promotions and programs are delivered to the channel are “on time, in full” to support channel execution. Inform the area channel leadership teams of significant operational, service and quality challenges and support mitigation. Support joint business planning and quarterly business review (QBRs) processes across geographic regions/areas with division-defined priority channel partners to support business objectives. Execute cross-selling opportunities for mutual growth between partners and 3M. Support and influence Channel Incentive Plans (CIP) and Market Development Funds (MDF) to drive partner engagement and performance. Deploy and ensure the effectiveness of division channel sales playbook and ensure alignment with organizational strategic priorities. Serve as the primary liaison contact between the Division and Channel, facilitating communication and alignment. Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Bachelor's degree or higher, with ten years of experience in sales, marketing, or business development (completed and verified prior to start) Five (5) years of proven success in building and managing global partner ecosystems in a private, public, government or military environment Five (5) years of experience in designing and managing Customer Incentive Plans and Market Development Fund strategies. Five (5) years of experience with CRM and channel management platforms like Salesforce and SAP. Additional qualifications that could help you succeed even further in this role include: Strong communication, leadership, and negotiation skills. Ability to work across complex organizational structures. Travel: May include up to 30% domestic Work location: This role follows an on-site working model, requiring the employee to work at least four days a week at the 3M Center in Maplewood, MN. Relocation Assistance: May be authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Job Duties allow for some remote work but require be at St Paul offices, MN at least 4 days per week. Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $228,040 - $278,715, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: ******************************************************************* Faith Posting Date Range 09/19/2025 To 10/19/2025 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

As a PT Leader-2, you will lead and develop a team of Fitness Professionals to a successful career at Life Time. You will assist club leadership in bringing the Life Time Training brand and philosophy to life every day through amazing experiences. You will do this by being responsible for the experience on the fitness floor through delivering the best Dynamic Personal Training experience. You will also be responsible for delivering team member one on one's, selling training for our newer Fitness Professionals, coaching live client and member experience sessions, on-boarding of new team members, assisting in managing the connectivity and sales process, educating on all products and services, delivering your own personal production, and helping your team achieve their personal financial goals and those of the division. Job Duties and Responsibilities * Manages, supports, develops, coaches, and mentors a team of fitness professionals to be successful based on brand and performance expectations. Includes disciplinary and termination actions as needed. * Responsible for the total experience and results of all clients * Be a Player-Coach by setting the example through Dynamic Personal Training through managing your own individual book of business * Oversees the quality and consistency of products, services, programs, and fitness floor experience for fitness professional team * Determine and implement strategies for ensuring the personal training team meets their productivity goals; drive content for department-wide meetings to achieve these strategies * Generates new clients and refers them to appropriate fitness professional based on client needs; Ensures TM has appropriate skills and training to successfully meet member needs * Promotes and directs execution of Life Time Training initiatives such as 60 Day and other special events * Completes and supports all scheduling, administrative, and coordination tasks for all programs and classes (metabolic, small group, nutrition, etc.) * Minimum Required Qualifications * High School Diploma or GED * Certified Personal Trainer * CPR and AED Certified * 2+ year of personal training experience * Demonstrated Leadership / Management Skills * Demonstrated strong communication, sales, program design, and coaching skills * Ability to drive results through others Preferred Qualifications * Bachelors degree in kinesiology, sports medicine, or a related field * Experience in delivery and overall knowledge of virtual training methodology * Demonstrates success in increasing client acquisition and retention * Ability to manage multiple fitness professionals to a successful outcome * Demonstrates expertise in Life Time business applications (Exerp, Workday, Domo, etc.) Life Time is a place for everyone. As an organization, we are committed to an inclusive, diverse and equitable workplace that respects and celebrates the unique contributions of each individual while ensuring we remain an equal opportunity employer that recruits, hires, trains and promotes based on merit and qualifications.

Do you consider yourself an innovator, a builder, a game-changer? Do you have what it takes to transform the payments, loyalty, and commerce space? Do you want to help develop and scale truly “never been done before” services and technologies? If yes, then we want to hear from you at Shop Your Way SYW OverviewShop Your Way (“SYW”) is a high-growth FinTech and e-Commerce enablement platform that leverages a proprietary technology infrastructure to service some of the largest and most innovative brands in America. SYW powers multiple business and consumer services, including SYW Rewards and the SYW Mastercard, along with a leading mobile app and digital destination. When bundled together as part of our Pay Your Way (“PYW”) service, we have a truly differentiated loyalty + credit solution for our business partners and their customers, without the hassle of setting up a direct credit relationship with a bank or underwriter. This integrated module makes it easy for Partners of any size to improve their conversions, drive new revenue, save on transaction and payment costs, and create more repeat business. Today, we're providing this “loyalty-card as a service” to Raise (gift cards) and Way (mobility) - two of the “Andreessen Horowitz Top 50 Marketplaces” - and other national brands. Now, we're expanding our offering to include other new application services while also unlocking new channels. SYW is at an exciting inflection point, built for scale and driving growth. Key Highlights include:● Recent investment of +$30M of “growth capital” from Private Equity / Hedge Fund sponsor● Long-term strategic partnership with Citibank powering a multi-billion dollar credit portfolio● Compelling pipeline of New Business Development initiatives, focused on SYW 5321 Card Externalization (“loyalty-card as a service”)● Proprietary, best-in-class loyalty and data technology platform built to power $10+ billion of partner business● A sizable (9 million active) yet hyper local member base of active shoppers● A valuable rewards currency, with more new places to burn - from gift cards to sports media to parking, car wash, electrical vehicle charging to crypto and ETFs● A multi-tender, proprietary “wallet” with rewards, gift cards, and credit● Platform can be white-labeled and quickly integrated into existing retail and loyalty systems ************************* Role Summary: Head of Legal Solutions (Loyalty + Credit) The Head of Legal Solutions (Loyalty + Credit) is responsible for leading, driving, and implementing all legal, risk, compliance and related initiatives for the SYW Rewards and Mastercard programs. Notably, this role will serve as the Legal Lead with our partners at Citibank and elsewhere. This leader will build the foundation for compliance based marketing in the fintech space. GROW THE BUSINESS (80% FOCUS) Lead initiatives and manage high-impact special project work streams with a results-driven focus to deliver solutions across: credit and lending, consumer protection & privacy, and financial services marketing Translate new business development strategy, goals, and initiative details in a succinct and clear manner; provide direction and guidance on the programs for/with/to Citibank Accelerate speed to market of new opportunities by being the single point for legal review of contracts, as well as with Citibank Develop the legal operating model and processes that move with speed while maintaining the required level of risk and compliance rigor Engage with the product and function coverage teams, in order to partner to develop and apply Program solutions that meet the function/business/product and customer needs in a manner consistent with the Citi program framework Develop creative solutions and well-reasoned legal-business cases that accelerate and advance the go-to-market efforts Advise function/business/product management and teams on regulatory and compliance issues; develop and “sell in” credible challenges and arguments in favor of the solutions Serve as a subject matter expert on Citi's Compliance programs. Provides expert guidance on function/business/product regulations on a real-time basis to manage compliance risk RUN THE BUSINESS (20% FOCUS) Oversee the monitoring and identification of regulatory developments, including enforcement actions, and new laws, regulations, rules, and interpretations or guidance relating to the supported function/business/product Anticipate and address potential legal risks with business partners Analyze and scope the impact of new and complex regulatory developments across senior function/business/product, including cross partner implications Manage strategy and responses to regulatory examinations, reviews and inquiries and internal and external investigations, as well as testing and audit Serve as the senior compliance risk officer responsible for establishing internal strategies, policies, procedures, processes, and programs to prevent violations of law, rule, or regulation and design and deliver a risk management framework that maintains risk levels Understanding the evolution of the Consumer Financial Protection Bureau (CFPB) to guide our business as we continue to evolve both our technology and marketing platforms Design and lead compliance and control reviews Requirements: J.D. Degree with a minimum of 8+ years or proven hands-on experience driving and supporting credit product, credit marketing, and credit risk/compliance programs across branded, co-branded, and/or general-purpose cards Deep understanding and experience in consumer lending and protection, including Compliance laws, rules, regulations, risks and typologies; including but not limited to CCPA, TCPA, GDPR, and more3+ years experience with credit card marketing Fair Lending & Consumer Financial Protection Act expert Experience with advising teams leveraging algorithms and business specific data to serve credit card ads to potential customers Strong presentation skills with the ability to articulate complex problems and solutions through concise and clear messaging Excellent written, verbal and analytical skills Must be a self-starter, flexible, innovative and adaptive; able to successfully navigate complex and novel legal/business situations Highly motivated, strong attention to detail, team oriented, organized

Replies within 24 hours Benefits: Bonus based on performance Company car Competitive salary Dental insurance Employee discounts Free food & snacks Health insurance Opportunity for advancement Paid time off Profit sharing Training & development Vision insurance Make Great $$$ Working for a Company You'll LOVE! 1-800-Plumber +Air & Electric is looking for a hard driven career focused Residential Licensed Plumber. 3 Reasons You'll LOVE Working for Us…· Our employees must win! · Our customers must win! · Our company must win! Perks Day shift Monday to Friday* Company vehicle* Local work, home every night $100 Boot Certificate (Cavenders, Red Wing or Work Boot) Tool Account* Business cards* Amex Card Company Phone Provide uniforms Profit Sharing Family environment Weekly team meetings Discounted services as an employee Free Classic Homeguard membership What's in it for you? Excellent question! You want to work for us because I can promise you a new career that you'll love filled with:o Great money ($80,000- $135,000 IN JUST THE FIRST YEAR) o Great benefits**** o Great opportunity! (We're busy year-round! No sitting at home and worrying!)o Growth potential! (We grow every year, which means we're looking for future managers!)o Continual training & education! o And most importantly: PERSONAL SATISFACTION DOING A JOB YOU WILL LOVE!!! Benefits Health Insurance Dental/Vision Retirement Plan PTO Paid sick/Snow days Paid Holidays Paid training Paid continued education Birthday off with pay Qualifications · MUST have excellent customer service skills· Basic mechanical aptitude, and ability to perform regular manual labor· Basic computer skills· Be open to learning new things and applying them quickly· MUST be licensed or getting ready to test for license Now, if that's the type of company that you'd like to work for-and I hope it is-please apply. I would love a chance to talk with you-and get to know you better. Let's make sure we're an ideal fit for each other. Jasen Shreiner Compensation: $80,000.00 - $135,000.00 per year This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to 1-800-Plumber Corporate.

SUMMARY : The Electrical Journeyworker Foreman's job is to oversee job sites and construction projects including goal setting and organization of activities to ensure objectives are met. The Electrical Journeyworker Foreman leads and manages Crew Members and Subcontractors efforts to complete tasks on time, on budget, and to the customers' satisfaction. ESSENTIAL JOB FUNCTIONS: Direct the completion of daily tasks per SOW. Identify and report observations which affect the project schedule, budget, quality and safety and completion, including scope of work changes. Communicate the daily goals with the crew and delegate tasks to crew members appropriately to their skill set. Provide feedback on performance. Submit all required daily/weekly/monthly reports and documents (JSA, receipts, inspections, audits, other documents as assigned). Approve all daily time sheets for the crew. Coordinate management tasks with the Construction Manager. Ensure team members follow safety requirements and plans, work safely, and properly wear PPE. Verify all materials needed to complete the work are at the job site when needed, identify missing materials, work with CM's to get any missing materials needed to complete assigned tasks efficiently. Inventory job site materials at the beginning and end of each project. Ensure truck, trailer, tools, and equipment are inspected and used properly, kept organized and in working condition. Ensure the job site is clean and safe while working each day onsite, and when the job is completed Perform crew and team member duties when needed. Lead and manage assigned staff and perform supervisory duties in accordance with the organization's policies and applicable laws including: training employees, planning, assigning, and directing work, appraising and reporting performance, coaching and mentoring, addressing complaints and resolving problems. Other duties as assigned. QUALIFICATIONS: All employees must possess the ability to promote and model the Premise Core Values of: Be Ready to Learn Own the Result Build Trust Do the Right Thing Drive to Complete Other required qualifications for this role are: Experience: 1 - 3 years of related experience as a Foreman in a similar business. Experience working in utility-scale solar Journeyworker Electrician license (required) Basic technical understanding of the work being managed and performed by the team. Strong organizational, problem-solving, analytical, math, and reasoning skills. Ability to manage multiple priorities and workflow changes. Ability to manage multiple subordinates/crew members/subcontractors with differing backgrounds, skills, and personalities. Ability to prepare and schedule step-by-step action plans. Able to perform trade-specific tasks and operate tools and equipment as needed. Proven ability to read and interpret construction drawings, schematics, and SOW. Understanding of National Electrical Code, electrical systems, installations, and designs. Proficient in electrical installations, materials, tools, testing, and techniques. Proficient with installations of electrical conduit, wire, cable, lighting, devices, and other electrical installations. Excellent verbal and written communication skills. Able to communicate effectively, clearly, and succinctly through spoken and written forms with peers, management, and customers. Able to effectively communicate with people at all levels and from various backgrounds Ability to learn and use Premise provided software. Knowledge of construction, quality, safety, and OSHA guidelines. Specific certifications and licensing, as needed Ability to travel and stay overnight at remote job sites as needed Valid Driver's License and ability to maintain a clean driving record. OTHER REQUIRED COMPETENCIES: Problem Solving - Uses rigorous logic and methods and honest analysis to solve difficult problems with effective solutions. Can see hidden issues. Looks beyond the obvious and doesn't stop at the first answer. Is skilled at using analysis skills to define the problem and identify the solution. Technical/Professional Knowledge & Skills - Possesses the relevant and required knowledge and skills to effectively perform on the job. Maintains relevant knowledge and skills as appropriate. Keeps up with current developments and trends in the areas of expertise. Delegating Responsibility - Allocates decision-making authority and/or task responsibility to appropriate individuals to maximize the organization and the individual's effectiveness. Provides support without removing responsibility. Trusts staff to perform and finish their own work. Is good at establishing clear directions. Managing Work and Priority Setting - Effectively manages one's time and resources to ensure that work is completed efficiently. Can identify and concentrate efforts on the more important priorities. Can quickly sense what will help or hinder accomplishing a goal and creates focus. Can attend to a broader range of activities and gets more done in less time than others. Safety Awareness - Identifies and corrects conditions that affect employee safety and upholds safety standards. Monitors safety or security issues after taking corrective action to ensure continued compliance. Demonstrates the organization's safety procedures and best practices and is a role model for the desired behaviors. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to, stand, sit, walk, lift, squat, push, pull, climb stairs, ladders and possibly towers, hear, see, reach, grasp and use hands and fingers to operate a computer key board, telephone, power tools, and equipment. The employee must have the ability to occasionally lift more than 50 lbs. WORKING ENVIRONMENT: While performing the essential functions of this job, the employee will work both inside in a normal indoor office environment and outside at remote job sites. The employee may be exposed to extreme weather conditions, including heat and cold and wet or humid. The employee may work in high places, and/or work around moving mechanical parts, vehicles and other equipment. The employee may also work in areas where the noise volume is loud and constant. The employee must have the ability to travel to remote job sites approximately 40 of their work week which will include overnight stays. Premise Inc. is an equal opportunity, affirmative action, veteran-friendly employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. The duties and responsibilities listed in this are not all-inclusive and other duties may be assigned. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionSalary: MarTech & Personalization Lead The MarTech & Personalization Lead will play a critical role in driving the strategy and delivery of Smiths marketing technology solutions. This role sits at the intersection of technology, data, marketing automation, and client strategy. The ideal candidate is both a strong operator and strategic thinker who can shape forward-thinking personalization roadmaps while overseeing the implementation of key MarTech platforms. This role will ensure the successful design, delivery, and optimization of MarTech solutions while also contributing to Smiths broader go-to-market strategy. A strong partnership with strategy, sales, and cross-functional leaders will be essential to define offerings, mature capabilities, and enable effective, data-driven customer engagement across the full customer lifecycle. What Youll Do Oversee the implementation of key platforms including marketing automation, customer data platforms (CDP), loyalty and personalization technologies. Consult and guide clients on strategy, architecture, and implementation approaches for marketing technologies. Contribute to the sales & solutioning process supporting the sales and account teams by defining solution strategy, approach, estimates and pricing. Provide subject-matter expertise in evaluating MarTech tools, platforms, and solution options aligned to client goals. Execute successful implementation, rollout, and ongoing support of MarTech solutions for clients. Lead and advise on customer lifecycle marketing strategy, including segmentation, personalization journeys, and orchestrated campaigns. Identify data requirements and KPIs essential to delivering measurable client project success. Partner with leadership to shape capability development, offering strategy, and opportunities for revenue growth. Contribute to case studies and client references showcasing effective MarTech and personalization implementations. Monitor industry trends to ensure Smith remains ahead of emerging tools, technologies, and best practices. Define and evolve customer lifecycle marketing frameworks that drive retention, expansion, and long-term customer value across key client accounts. What We Look For Demonstrated experience leading MarTech implementations across automation, CDP, loyalty and personalization platforms. Strong understanding of data strategy, customer segmentation, and measurement frameworks. Proven ability to translate complex concepts into actionable strategies for both technical and non-technical audiences. Experience building and scaling a MarTech or personalization capability within an agency or consulting environment. Excellent client communication skills, with the ability to influence at senior levels. What Grabs Our Attention Hands-on expertise with leading platforms such as SAP Emarsys, Kalyvio, Hubspot, Salesforce Marketing Cloud, Adobe Experience Platform, Braze, Iterable, or similar. A track record of delivering measurable improvements in customer engagement, retention, or revenue through personalization. Experience creating compelling, industry-leading case studies or thought leadership in the MarTech space. Ability to identify and cultivate strategic partnerships that enhance Smiths MarTech capabilities. A passion for innovation and continuous improvement in marketing technology. Smith | Commerce Reimagined. Performance Realized. Smith goes beyond the traditional digital agency. We focus on converting our clients potential into performance. With over 20 years of commerce experience at our core, we bring deep expertise, coupled with an unparalleled passion for results, to every engagement. By working hand-in-hand with our clients and key partnerships with technology platforms including SAP Commerce (formerly Hybris) and Salesforce, we consistently produce commerce experiences that help brands and businesses do more than simply improve. We help them thrive. By combining our strategic, creative, analytical, and technical capabilities, we consistently enhance customer experiences, accelerate sales, and optimize operations, enabling over 500,000 transactions every day and driving over $38 billion in annual revenue for our clients. Our unique ownership structure is based on a philanthropic foundation which allows us to focus on client outcomes before quarterly earnings reports and empowers us to make decisions focused on helping our clients with our profits enabling socially beneficial programs. Smith has offices in Dayton, OH; Ottawa-Gatineau, Canada; and Santiago, Chile along with our remote workforce distributed throughout the United States and Canada. We are the perform

Under direct supervision of the Chief Operating Officer on Snowbridge projects, this position leads Service Technician crews in the performance of their projects and jobs, ensuring all are clear on their assignments, are personally prepared, and have prepared their vehicle(s), equipment, and tools to ensure timely and quality service to Snowbridge standards and customer specifications. ***Overnight travel required for this position*** Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Models, monitors, and enforces safety compliance with all applicable safety rules and regulations, ensuring a safe work environment for field staff on a project or job by requiring appropriate safety training and compliance, including proper use of PPE. Leads and mentors service and field staff in efficient time management, job preparation, and technical expertise. Coordinates schedule/feasibility with Chief Operating Officer (Snowbridge project) or Field Superintendent (HCRR job). Confirms project/job with Internal Operations Manager for booking. Coordinate with Director of Business Development regarding time and equipment requirements on bid projects; manages the budget; collaborates on final charges prior to invoicing the client. Conducts daily pre-work safety reviews and project/job planning and preparation/tailgate talk. Manages field workflow for maximum quality and productivity, maintaining communication with service and field staff, immediately resolving unusual issues, relaying information to Chief Operating Officer or Field Superintendent as appropriate. Ensures Service Titan is used daily, accurately, and completely throughout the project/job (photos, videos, forms, notes, etc.). Ensures customer satisfaction on all jobs; documenting/recording in Service Titan; referring issues to Chief Operating Officer or Field Superintendent as appropriate. Adheres to Snowbridge Employee Handbook / Guidelines / Policies. Other duties as assigned by leadership Competencies Technical Expertise Fosters Teamwork Empowers Others through Mutual Respect Forward Thinking with Attention to Detail / Results Orientation Initiative & Innovation Organization Supervisory Responsibility The Foreman directly supervises Technicians, Trainees, Apprentices, Helpers, and Laborers. This position also contributes performance feedback on other staff. Work Environment Functions in an office/shop/field environment. The office and shop are controlled climates. Field work is outdoors under potentially hazardous conditions including challenging terrain and inclement weather at elevated altitude. The position may be exposed to chemical fumes/residue, equipment with moving parts, routinely uses standard office equipment such as computers, phones, printers, scanners, tablets, cell phone, etc. Physical Demands This position is regularly required to stand, walk, sit, crouch, bend, reach for and carry objects, with a full range of body movements including the use of hands to finger, handle and feel objects such as tools and use computer keyboard and iPad. Must be agile with good balance, no fear of working at heights, and be able to lift and carry 75 lbs. Must have command of all five senses: hearing, touch, smell, taste, and sight, including close vision, depth perception, and the ability to adjust focus and distinguish between subtle variations in color. Position Type and Expected Hours of Work Regular Monday-Friday work week; may require early, late and/or evening/weekend work, follow-up/coordinating hours with the Field Superintendent (with flexibility to work from home as appropriate). Travel Travel is required for this position beyond routine daily travel, with the goal not to exceed 60 days annually. Required Education and Experience and Licensing High School Diploma. 3 years of drain cleaning/plumbing/CIPP experience plus ability to manage a drain cleaning/plumbing/CIPP crew. OSHA practices relative to maintenance and construction of underground utilities. CDL Class B with driving record meeting Company insurance requirements. Preferred Education and Experience 5 years managing a drain cleaning/plumbing/CIPP crew. CDL Class A with driving record meeting Company insurance requirements. Work Authorization / Security Clearance (if applicable) Eligible to work in the United States including clearance to work on Federal Contracts AAP/EEO/EPEW Statement Snowbridge provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristics protected by federal, state, or local laws. Snowbridge will also take affirmative action as called for by applicable laws and Executive Orders to ensure that minority group individuals, females, disabled veterans, recently separated veterans, other protected veterans, Armed Forces service medal veterans, and qualified disabled persons are introduced into our workforce and considered for promotional opportunities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Starting pay for this position is $80,000 per year. Starting pay may be above or below based on potential employee qualifications, operational needs and other considerations permitted by law as permitted by Colorado Equal Pay Transparency Rule 4.1.2. Snowbridge takes into consideration a candidate's education, training, and experience relevant to the position for which they are applying, as well as the position's work location, expected quality and quantity of work, required travel (if any), external market and internal value, including seniority and merit systems, and internal pay alignment when determining the salary level for potential new employees. In compliance with the Colorado Equal Pay for Equal Work Act, a potential new employee's salary history will not be used in compensation decisions Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice Conditions of Employment Must have and maintain a valid Colorado Driver's License Able to work additional hours outside of a regular schedule and available on an as-needed or emergency basis Able to perform strenuous labor Ability to stand, walk, climb, crawl, kneel, bend, reach above shoulder Ability to push, pull, have manual dexterity, eye-hand coordination, near and far vision, hearing abilities, and be able to verbally communicate with others Ability to work inside and outside, work alone, perform duties in extreme cold/heat, work above ground, work with chemicals/solvents, work around noise and vibrations, walk on uneven surfaces, operate moving equipment/vehicles, climb on ladder, work in confined spaces, work with machinery, work in hazardous conditions. Other Considerations All offers of employment are contingent upon the successful completion of your I-9 with E-Verify, a pre-employment background check, and a negative drug test for illegal substances in accordance with applicable state and federal laws. *Please note that while cannabis may be legal under state law, it remains prohibited under federal law and company policy for certain safety-sensitive positions.

Create an outstanding customer experience through exceptional service. Establish and maintain a safe and clean environment that encourages our customers to return. Assist manage in achieving sales and profit goals established for the Cheese department, and monitor and control all established quality assurance standards. Embrace the Customer 1st strategy and encourage associates to deliver excellent customer service. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. Minimum * Current food handlers permit once employed * Effective communication skills * Knowledge of basic math Desired * High school diploma or equivalent * Retail experience * Second language: speaking, reading and/or writing * Create an environment that enables customers to feel welcome, important and appreciated by answering questions regarding products sold within the department and throughout the store. * Gain and maintain knowledge of products sold within the department and be able to respond to questions and make suggestions about products. * Offer product samples to help customers discover new items or products they inquire about. * Inform customers of cheese specials. * Responsible for training and coaching associates within the department to effectively perform their job duties at a satisfactory or above level. * Provide customers with fresh products that they have ordered and the correct portion size to prevent shrink. * Measure, prepare and mix ingredients according to recipe, using variety of kitchen utensils and equipment. * Adequately prepare, package, label and inventory ingredients in merchandise. * Check product quality to ensure freshness. Review "sell by" dates and take appropriate action. * Label, stock and inventory department merchandise. * Report product ordering/shipping discrepancies to the department manager. * Display a positive attitude. * Understand the store's layout and be able to locate products when requested by customer. * Stay current with present, future, seasonal and special ads. * Maintain an awareness of inventory/stocking conditions note any discrepancies in inventory. * Adhere to all food safety regulations and guidelines. * Ensure proper temperatures in cases and coolers are maintained and temperature logs are maintained. * Reinforce safety programs by complying with safety procedures and identify unsafe conditions and notify store management. * Practice preventive maintenance by properly inspecting equipment and notify appropriate department or store manager of any items in need of repair. * Notify management of customer or employee accidents. * Report all safety risk, or issues and illegal activity, including: robbery, theft or fraud. * Must be able to perform the essential functions of this position with or without reasonable accommodation.

Required Qualifications: * Previous experience in a physically intensive role * Previous experience in a supervisory, crew lead or leadership role * Ability to travel for extended periods of time, overnight * Ability to be on-call for emergency response * Valid Driver's license * Perform physical functions per job requirements * Successfully complete a background check, drug test, and physical, by position * Per OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: * Previous heavy equipment experience (bobcats, excavators, etc) * Previous environmental and/or industrial experience (ie. site remediation, spill response, hydro blasting, vacuum truck, tank cleaning, refinery-based work) * Commercial driver license Hepaco, A Clean Harbors Company is an equal opportunity employer. Hepaco, A Clean Harbors Company is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ******************** or **************. Hepaco, A Clean Harbors Company is a Military & Veteran friendly company. Hepaco, A Clean Harbors Company is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. * HEP Key Requirements: * Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe manner * Train and mentor the Field Service Technicians * Execution of projects/jobs within budget and on time * Enforce and ensure OSHA, EPA and H&S standards or regulations are compliant * Understand and work with the Coordinator in the communication of manpower, equipment and resources required to complete field service and emergency response projects * Manage large scale field service and emergency response projects when directed * Engage in strenuous physical labor including lifting and pulling heavy objects * Operate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing tools * Wear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinations * Work in various temperatures indoors and outdoors in all weather conditions * Work in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosive * Work in potentially elevated noise levels, confined spaces, including lifting in areas of low clearance * Work at elevations including working from ladders and scaffolding * Assist in field sampling activities and calibration of meters * Climb ladders, scaffolding and into and out of trucks, tanks, and various other containers * Work extended (> 8 hrs.) time periods * Attend all compliance and safety update meetings * Inspect drums for container integrity and regulatory compliance * Safe loading and unloading of hazardous and non-hazardous waste * Conduct waste stream sampling and profiling as necessary * Complete associated paperwork, such as worksheets, vehicle inspections, equipment inspections and permits * Follow all local, state (provincial) and federal compliance regulations and rules * Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements * Safely observe all corporate operating guidelines and procedures * Observe all company environmental health and safety operating guidelines * Perform other duties as assigned * By position, ability to be on call for emergency response on rotating basis every other week * By position, site-remediation, equipment decontamination, and the handling of hazardous materials * By position, may perform lead responsibilities

GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew. Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project. This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor. Sales Rep weekly and/or as needed and before new projects. WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly. Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently. Complete the project per the approved scope of work or specification and after issuance by the Supervisor. Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site. These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased. Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer. Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely. Provide pricing for self-performing projects over $12,500. Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep. Monitor and manage the Field Reps. Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation. Work with the Supervisor to elevate the issues to HR as required. Coordinate with the Supervisor to create project schedules. Review time reports daily and make necessary corrections with the admin team. Attending all appropriate calls, meetings, and trainings. Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager. EXPERIENCE: Minimum of five years of experience in the roofing industry. Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly. CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. OTHER SKILLS AND ABILITIES: Ability to travel out of town, including overnight stays. Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test. Ability to read, write, and speak English. The salary range for applicants in this position generally ranges between $55,000 and $75,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.

Overview At MasTec Communications Group we build for the future. Yours and ours. As a Field Foreman, you will develop new skills, work in a safety-minded environment, and join us in expanding technology for a better community. Join the MasTec family and help us provide the highest level of quality service to our customers and communities while maintaining our commitment to safety! Responsibilities As a Field Foreman, you are responsible for leading the daily site construction work efforts to ensure the crew meets production goals determined by leadership. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Understand and implement MasTec Communications Group's Health, Safety, and Environmental Policies (Safety Manual) Understand and implement Industry standards (OSHA, TIA10-48, NATE CTS, and ANSI) Ensure safety requirements at your sites and with your crew Oversee the daily operations and quality of work performed at assigned sites Maintain daily paperwork required for the site and the crew Implement and follow through with job instructions provided by leadership Compile all site-specific closeout documentation for your work effort Upload closeout documentation to customer interfaces Coordinate with the customer representative for site-related activities and maintain a good working relationship with the customer representative Provide leadership, guidance, and actively train/promote learning to all crew members Always maintain equipment and vehicles in operational condition Validate daily timesheets for Management Conduct other duties as assigned Qualifications About You: Safety is a part of your day-to-day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a High school diploma or general education degree (GED), and a technical degree is preferred You have at least 5 years of industry experience Possessing a WSA certification is a plus Must be at least 21 years old, have a valid driver's license, and a clean driving record to operate a company vehicle You have demonstrated expertise in construction skills, rigging, safety, and general industry knowledge You possess job-related certifications-First Aid, Safety, Rescue You have the ability to operate aerial lifts, man lifts, skid steers, and aerial platform equipment You must be able to read and interpret site plans, RFDS, construction drawings, and SOW You must be able to pick up to 50 lbs., and be capable of working up to 12 hours You have the ability to identify and distinguish colors You possess 10+ years of experience You have possession of OSHA 10 You have excavator training You have 100% travel availability Compensation of $28-$35 per hour, depending on the experience. Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers About You: Safety is a part of your day-to-day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a High school diploma or general education degree (GED), and a technical degree is preferred You have at least 5 years of industry experience Possessing a WSA certification is a plus Must be at least 21 years old, have a valid driver's license, and a clean driving record to operate a company vehicle You have demonstrated expertise in construction skills, rigging, safety, and general industry knowledge You possess job-related certifications-First Aid, Safety, Rescue You have the ability to operate aerial lifts, man lifts, skid steers, and aerial platform equipment You must be able to read and interpret site plans, RFDS, construction drawings, and SOW You must be able to pick up to 50 lbs., and be capable of working up to 12 hours You have the ability to identify and distinguish colors You possess 10+ years of experience You have possession of OSHA 10 You have excavator training You have 100% travel availability Compensation of $28-$35 per hour, depending on the experience. Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers As a Field Foreman, you are responsible for leading the daily site construction work efforts to ensure the crew meets production goals determined by leadership. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Understand and implement MasTec Communications Group's Health, Safety, and Environmental Policies (Safety Manual) Understand and implement Industry standards (OSHA, TIA10-48, NATE CTS, and ANSI) Ensure safety requirements at your sites and with your crew Oversee the daily operations and quality of work performed at assigned sites Maintain daily paperwork required for the site and the crew Implement and follow through with job instructions provided by leadership Compile all site-specific closeout documentation for your work effort Upload closeout documentation to customer interfaces Coordinate with the customer representative for site-related activities and maintain a good working relationship with the customer representative Provide leadership, guidance, and actively train/promote learning to all crew members Always maintain equipment and vehicles in operational condition Validate daily timesheets for Management Conduct other duties as assigned

ONEX Construction is in search of an expert Pipe Shop Fabrication Lead. A person that has dedicated themselves to mastering the very detailed craft of pipe welding and fabrication. This role demands technical knowledge, capacity to lead, mentor, and guide a diverse team through complex projects that span several high-level industries, including food, beverage, pharmaceutical, automotive, and marine sectors. With a strong focus on GTAW (Gas Tungsten Arc Welding, or TIG welding), particularly for stainless steel tubing as well as Schedule 10, Sch 40, Sch 80, etc. At this position you will help our operation by being a leader of Safety, Quality, Performance, Excellence and Innovation in pipe fabrication. Key Responsibilities: As the Pipe Fabrication Shop Lead, you will be entrusted with a broad spectrum of responsibilities that require both hands-on expertise and leadership. Your daily duties will include: Project Oversight: Direct management of pipe shop fabrication projects, from inception to completion, ensuring adherence to project specifications, timelines, client schedules, and budgetary constraints. Team Management: Leading, managing, delegating, and training pipe welders and pipefitters, fostering a culture that encourages continuous learning and excellence. Technical Direction: Providing clear guidance on all facets of pipe fabrication, including preparation, assembly, welding, inspection, and quality control. Quality Assurance: Upholding the highest standards of weld integrity and compliance with industry codes such as ASME B31.1 & ASME B31.3; -*D1.1 and D17.1 certifications are a plus. Safety Compliance: Promoting a safe work environment, enforcing safety protocols, and ensuring all team members are properly trained and equipped to perform each task, operate each tool, and piece of equipment safely. Technical Qualifications and Certifications: The successful candidate will possess a robust technical background, while possessing relevant certifications and verifiable experience in advanced welding processes. Required qualifications include: GTAW / TIG Welding Mastery: Demonstrated in GTAW-TIG welding on stainless steel tubing & Schedule Piping while having a fundamental skill for the fabrication of clean, reliable piping systems in sensitive industries. Orbital Welding Experience: Proficiency in orbital welding techniques, essential for projects demanding uniform and repeatable weldsfrequently utilized in the food & beverage, pharmaceutical, and high-purity sectors where precision is paramount. ASME B31.1 & B31.3 Certifications: Comprehensive knowledge and certification in these codes is required, a irming expertise in power piping (B31.1) and process piping (B31.3). Weld Testing: Ability to pass a minimum 6G weld test. *The ability to pass 6GR is a plus. D1.1, D17.1 Certifications (Strongly Preferred): Additional certifications under these codes signal versatility and a commitment to continual development. Materials Expertise: Hands-on experience welding a range of advanced materials is beneficial. This includes Aluminum, Titanium, Hastelloy, Molybdenum, Inconel, and Copper-Nickel. Industry Specializations: Precision pipe fabrication requires not only technical skill, but an understanding of the unique requirements of each sector: Food & Beverage: Strict sanitary standards necessitate flawless welds and contamination-free surfaces. TIG welding of stainless steel ensures smooth, clean piping for product integrity and safety. Pharmaceutical: Ultra-high purity standards require orbital welding expertise for consistent, crevice-free joints that prevent the formation of bacteria, microbial growth, and facilitate e ective cleaning. Automotive/Marine: Fabrication often involves intricate assemblies using both standard and exotic materials, requiring adaptability and precise control. *Certified Lokring installer for Process/Marine is considered a plus. Leadership/Management: Beyond technical ability, the Pipe Fabrication Shop Lead must be a seasoned leader: Training and Mentorship: Develop the skills of the welding and pipefitting team, developing bench strength, o ering hands-on instruction and fostering a culture of safety and quality. Delegation: Assign tasks strategically, matching individual strengths to project requirements for optimal results in the shop as well as personnel assigned to the field.

GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew. Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Foreman also ensures that all technicians complete Daily Hazard Analysis. * Ensure all project communication is completed before the start of any WTI project. This includes but is not limited to communication with: * WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor. * Sales Rep weekly and/or as needed and before new projects. * WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. * Customer/Client (as needed or required by the Sales Rep) daily and/or weekly. * Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently. Complete the project per the approved scope of work or specification and after issuance by the Supervisor. * Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site. These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased. * Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer. * Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely. * Provide pricing for self-performing projects over $12,500. * Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep. * Monitor and manage the Field Reps. Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation. Work with the Supervisor to elevate the issues to HR as required. * Coordinate with the Supervisor to create project schedules. * Review time reports daily and make necessary corrections with the admin team. * Attending all appropriate calls, meetings, and trainings. * Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager. EXPERIENCE: * Minimum of five years of experience in the roofing industry. * Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly. CERTIFICATES, LICENSES, REGISTRATIONS: * 30-hour OSHA certification * Registered Roof Observer (RRO) preferred but not required. OTHER SKILLS AND ABILITIES: * Ability to travel out of town, including overnight stays. * Must have reliable transportation and a valid driver's license. * Ability to work weekends and/or holidays when needed. * Ability to pass a pre-employment drug test. * Ability to read, write, and speak English. The salary range for applicants in this position generally ranges between $55,000 and $75,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.

Working Foreman Needed - Girard, Oh Newsweek's list of Top 100 Most Loved Workplaces for 2024 Hourly Pay: $27.00- $29.00 per hour (based on experience) Shift/Schedule: 1st Shift; Monday thru Friday 7:30am to 4:00pm Full Time Benefits for Employee & Family: Anthem Blue Cross/Blue Shield Medical Coverage Dental and Vision 401K Company Match Paid Vacation and Holidays Company Paid Life Insurance Short-Term/Long-Term Disability Room for growth! Aim promotes from within! Click to apply or contact a recruiter with questions by calling ************ or via email at [email protected]. Additional Information: Online Orientation Fix late-model equipment Access to the latest equipment and technology 1+ years diesel mechanic experience required Must Have Tools State Inspection License preferred CDL and/or ASE Certifications preferred Referral Bonus Program: Aim offers a robust referral bonus program. Aim employees receive $2000 for each driver and diesel mechanic they refer to come work at one of our 50+ locations nationwide. With no cap on the amount of referral bonuses one employee can receive, the earning potential is unlimited! Aim Transportation Solutions is a Top 30 Logistics Company! We are family-owned and financially strong. Aim Transportation Solutions has been in business for over 40 years and has grown to 1,000+ employees providing service nationwide. For more information about Aim Transportation Solutions, visit *************** #mechjob

The Shop Leader will provide daily work direction and leadership both strategic and tactical to all cell leaders and direct reports. He/she will have responsibility and authority to ensure that FAA approved repairs are performed on aviation hardware in accordance with APSI procedures. Working with his/her General Manager he/she will oversee the daily operation of the work cells. Essential Functions Tactical Role and responsibility: Provide and ensure a safe working environment exist for employees to perform their daily scheduled tasks. Drive excellence in housekeeping not only in specific cells but also in common areas. Provide and manage date commitments for repairs being performed. Drive to achieve one hundred percent daily on-time delivery while providing a quality level that meets or exceeds both Repair Station and customer requirements. Manage and understand rework, where it is occurring, why and what can be done to eliminate ----report this thru action item list. Manage preventive maintenance on CNC and manual machining equipment (lathes , mills and grinders ) , plunge and wire EDM , vacuum/atmosphere furnaces , thermal spray equipment and various other plant machinery and equipment. Work closely with, engineering and Quality to identify and implement creative process improvement solutions. Update and maintain production sheets representing all released parts within their area of responsibility. Initiate Action Items to improve process, work closely with Operation Leader to ensure that these items are addressed and resolved in a timely manner. Drive a one-piece FIFO plan for the prioritization of work performed in the cell. Use customer date due (including Pool parts) as the method to determine priority and schedule. Promote and drive cross-training for all Cell employees. Model and exemplify Company Policies, i.e. attendance, break time and communication and shop metrics. Job Qualifications At least 2-4 years of directly related experience. Though knowledge of the Aerospace MRO industry. Good interpersonal, and communication skills. Ability to work as an individual contributor or team player. Great organizational skills and computer literacy. Experience with “Lean” concepts a plus. This is a hands-on position and requires experience with multiple in-house manufacturing pieces of equipment.

The Shop Lead Technician is a highly skilled and experienced technician responsible for performing complex diagnostics, repairs, and maintenance on a wide range of heavy equipment sold by Best Equipment. This role will involve providing technical guidance and mentorship to other technicians, ensuring quality workmanship, and contributing to the overall efficiency and productivity of the repair shop. The Lead Technician is expected to be a subject matter expert, capable of troubleshooting intricate mechanical, hydraulic, electrical, and electronic systems. Key Responsibilities Advanced Diagnostics and Troubleshooting: Conduct thorough and accurate diagnostics on complex equipment malfunctions, utilizing advanced diagnostic tools, software, and technical manuals. Identify root causes of failures and develop effective repair strategies. Interpret electrical and hydraulic schematics to pinpoint issues. Perform advanced testing and adjustments on engines, transmissions, hydraulic systems, electrical systems, and other critical components Complex Repairs and Maintenance: Perform intricate repairs and overhauls on heavy equipment according to manufacturer specifications and industry best practices. Replace and repair major components, including PD blowers, fans, water and hydraulic pumps, cylinders, and transfer cases Perform welding, fabrication, and machining tasks as needed for repairs. Conduct preventative maintenance services, including inspections, fluid changes, filter replacements, and component adjustments. Technical Leadership and Mentorship: Provide technical guidance, support, and mentorship to junior and mid-level technicians. Provide direction and direct training during the new technician onboarding process. Assist technicians with complex diagnostic and repair procedures. Providing detailed information to assist in technician performance reviews and to support the development of technician development plans. Share knowledge and best practices to enhance the team's technical capabilities. Lead specific repair projects or teams as assigned by the Service Manager or Service Writer. Quality Control and Documentation: Ensure all repairs and maintenance are performed to a high standard of quality and safety. Inspect completed work to verify proper functionality and adherence to specifications. Including additional areas of deficiency on the equipment. Accurately document all diagnostic findings, repairs performed, parts used, and labor hours in the shop's management system. Quality check all completed machines. Confirm that the repairs are finished and that the machine is ready to return to work. Shop Operations and Safety: Maintain a clean, organized, and safe work environment. Adhere to all safety regulations and procedures. Properly train technicians on use and maintain shop tools, equipment, and diagnostic instruments. Report any safety hazards or equipment malfunctions to the appropriate personnel. Assist with shop organization and workflow as needed. Continuous Learning and Improvement: Stay up-to-date with the latest heavy equipment technologies, repair techniques, and industry trends through training, workshops, and technical publications. Participate in ongoing professional development to enhance technical skills and knowledge. Identify opportunities for process improvement within the service department. Have the ability to relay and train the service team on new practices and techniques Customer Interaction (Occasional): Interact as needed with customers to explain repair procedures or findings in a clear and understandable manner. Maintain a professional and courteous demeanor when interacting with customers. Qualifications High school diploma or equivalent required; vocational or technical training in heavy equipment repair preferred. Minimum of 5-7 years of hands-on experience in the diagnosis, repair, and maintenance of heavy equipment. Proven expertise in diagnosing and repairing complex mechanical, hydraulic, electrical, and electronic systems. Strong understanding of diesel engines, transmissions, power trains, and related components. Proficiency in using diagnostic software, tools, and equipment. Excellent troubleshooting and problem-solving skills. Ability to read and interpret technical manuals, schematics, and diagrams. Strong communication and interpersonal skills. Strong organizational and time management skills. Valid driver's license and a clean driving record. Welding and fabrication skills. Benefits: Starting salary is competitive and will be based on qualification and experience. Best Equipment offers medical, dental, vision, and life insurance, 401K, 10 paid holidays, vacation and sick time, plus more benefits. For more information on Best Equipment, please visit ************************

GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew. Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. The foreman also ensures that all technicians complete the Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project. This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor. Sales Rep weekly and/or as needed and before new projects. WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly. Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently. Complete the project per the approved scope of work or specification and after issuance by the Supervisor. Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site. These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased. Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer. Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely. Provide pricing for self-performing projects over $12,500. Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep. Monitor and manage the Field Reps. Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation. Work with the Supervisor to elevate the issues to HR as required. Coordinate with the Supervisor to create project schedules. Review time reports daily and make necessary corrections with the admin team. Attending all appropriate calls, meetings, and trainings. Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager. CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) is preferred but not required. OTHER SKILLS AND ABILITIES: Minimum of five years of experience in the roofing industry. Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly Ability to travel out of town, including overnight stays. Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test. Ability to read, write, and speak English.

GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew. Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project. This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor. Sales Rep weekly and/or as needed and before new projects. WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly. Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently. Complete the project per the approved scope of work or specification and after issuance by the Supervisor. Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site. These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased. Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer. Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely. Provide pricing for self-performing projects over $12,500. Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep. Monitor and manage the Field Reps. Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation. Work with the Supervisor to elevate the issues to HR as required. Coordinate with the Supervisor to create project schedules. Review time reports daily and make necessary corrections with the admin team. Attending all appropriate calls, meetings, and trainings. Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager. EXPERIENCE: Minimum of five years of experience in the roofing industry. Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly. CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. OTHER SKILLS AND ABILITIES: Ability to travel out of town, including overnight stays. Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test. Ability to read, write, and speak English.

GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew. Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project. This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor. Sales Rep weekly and/or as needed and before new projects. WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly. Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently. Complete the project per the approved scope of work or specification and after issuance by the Supervisor. Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site. These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased. Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer. Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely. Provide pricing for self-performing projects over $12,500. Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep. Monitor and manage the Field Reps. Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation. Work with the Supervisor to elevate the issues to HR as required. Coordinate with the Supervisor to create project schedules. Review time reports daily and make necessary corrections with the admin team. Attending all appropriate calls, meetings, and trainings. Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager. EXPERIENCE: Minimum of five years of experience in the roofing industry. Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly. CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. OTHER SKILLS AND ABILITIES: Ability to travel out of town, including overnight stays. Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test. Ability to read, write, and speak English.