Lens coating technician jobs near me - 252 jobs

Title: Data Center FieldOps Technician (RunOps Technician) Contract:3 months with 1 year of extension The Datacenter FieldOps team is responsible for supporting all production network cabling in the Datacenter. This global team offers a unique career opportunity to work with the latest network technologies and talented engineers solving complex problems in the industry. Job Duties and Responsibilities Loopback Testing and Circuit Audits: Techs will perform loopback testing and circuit audits as per the project requirements. Loopback Testing Scope of Work: Identify all network circuits that require loopback testing Set up test equipment to simulate traffic on each circuit Perform loopback testing on each identified circuit Isolate and troubleshoot any faults or issues detected during loopback testing Document all test results, including any faults or issues found Circuit Audits Scope of Work: Conduct a physical inspection of all network circuits Verify that all network devices are properly configured and connected to the correct circuits Test the signal quality of each circuit Document all audit findings, including any discrepancies or issues found Remediate any issues found during the audit Overtime and Weekend Work: Overtime and weekend work will be available for all techs, as needed. Safety Briefings: Conduct regular safety briefings to ensure techs are aware of potential hazards and follow safety protocols. Physical and Mental Requirements ● Self-motivated, positive, professional, and proactive in process improvements. ● Promote company culture and mission. ● Proficient with required tools. ● Act as company liaison with customer representatives. ● Ability to work at heights, off ladders, in confined spaces. ● Lift up to 50 pounds and move up to 75 pounds. ● Good color vision, ability to read small print, and recognize audible signals. Skill Requirements ● Preferred in testing and troubleshooting MMF & SMF systems (OTDR & PMLS). ● Preferred 1-3 years of fiber experience. ● Preferred data center installation experience. ● Preferred mechanical and fusion splice experience. ● Preferred OSP / confined space entry experience (splicing). ● Proficient with trade tools including screwdrivers, torpedo level, tape measure, snips, pliers, hammer, wrench set, cable stripper, flashlight, gloves, punch tool, tone set, crimp tool, and Krone/3M/BIX tools.

**Locaion:** 950 Stelzer Road,Columbus,Ohio,43219 **Shift & Schedule:We have two shifts available:** + 1st Shift | Monday-Friday, 6:00 AM - 2:00 PMor + 3rd Shift | Monday-Friday, 10:00 PM - 6:00 AM Overtime, weekends, and holidays as needed The Production Technician II operates assigned workstations and supports operations through autonomous maintenance, preventative maintenance, changeovers, and minor adjustments to ensure optimal line efficiency. **Key Responsibilities** + Operate and monitor production equipment; replenish materials as needed + Set up machinery and ensure production materials are available + Perform quality checks and adjust processes based on data findings + Troubleshoot line issues and handle empty cases + Train other operators on equipment use + Perform basic Autonomous Maintenance (CIL) activities + Demonstrate knowledge and application of 5S principles + Clean and sanitize equipment and work areas as required + Accurately record operational data **Physical Requirements** + Regularly required to stand, walk, see, and smell + Frequent use of hands and wrists + Occasionally required to sit, stoop, kneel, push/pull totes, and stack by hand + Ability to lift, push, and pull 50 lbs repeatedly **Total Rewards:** + Starting pay: **$24.60** per hour. The employee will move to a higher rate of **$25.87** per hour in the quarter after their 6-month anniversary. **Benefits** (Effective Day One, Where Applicable): + Medical, Dental, and Vision Insurance + Disability Coverage + Paid Time Off (including vacation and sick leave) + 401(k) with company match + Tuition Reimbursement + Mileage Reimbursement _Benefits are subject to eligibility requirements and applicable collective bargaining agreements._ **Requirements:** + High school diploma or GED preferred + 2+ years of experience operating high-speed production machinery + Experience monitoring product quality in a manufacturing environment **Company Overview:** Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to **************** in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line. Keurig Dr Pepper is an equal opportunity employer and affirmatively seeks diversity in its workforce. Keurig Dr Pepper recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law.

Shapes Technician/Production. Allied Mineral Products, Inc. is a leading manufacturer of monolithic refractories worldwide, headquarters in Columbus, Ohio. Due to our continued growth we are looking for technicians in our Shapes department to work: 1st shift Mon - Fri 6:00 am - 2:30 pm Pay range: $20.25 - $28.16 We are looking for energetic, motivated and results-driven individuals to join our Team. Duties and Responsibilities Receives, inspects and evaluates all raw materials. Assists in the development, revision, etc. of raw materials as needed. Responsible for completing daily assignments to meet customer demands for production. Stages materials for daily production demand and weighs all production batches including additives. Assists in the training of any new employees as needed. Reads and interprets water charts for production recipes. Assists in maintaining an orderly plant layout - cleans and organizes areas as necessary. Interacts with vendors when necessary. Cleans mixer and staging areas. Makes sure the area is ready for the next day's staging of materials. Assembles forms using hand tools and power tools. May use various glues, adhesives and other bonding agents; grease and other form release agents; screws, bolts and other fasteners. Materials used to construct the form may include wood, rubber, steel, plastics and/or Styrofoam. As required by production (based on QA checks or problems), repairs forms using hand tools, power tools, and necessary materials typically used in form construction. Reviews blueprints/sketches of shape specifications. Compares assembled forms and finished shape measurements to blueprints to evaluate quality. Uses lifting equipment to move shapes and forms as needed. Uses hand tools and power tools to finish shapes prior to drying. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. Minimum Qualifications: Strong work ethic Dependable and able to follow instructions Great attention to details Ability to read/use a tape measure Ability to evaluate 3D shape against written specifications Good math skills Ability to routinely lift 50+ lbs. Must be able to read, speak and write English Outstanding Attendance Production or Forklift experience a plus Must be at least 18 years old Allied offers: Competitive wages Health Insurance: medical, vision, dental, and STD, LTD. Company contribution to a Health Savings Account. Employee Stock Ownership Plan (ESOP), 401K, profit sharing, and other. Tobacco free environment Tuition reimbursement Onsite fitness facility Family/Company events Vacation, holidays, and personal time off paid. Allied Mineral Products offers competitive wages, health, dental, STD, LTD and ESOP retirement plan and profit sharing. The ability to pass a drug screen and physical (to wear a respirator) is required prior to starting work should an offer be made. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

City/Cities: Columbus Travel Required: 00% - 25% No Shift: The Coca-Cola Company. Our vision is loved brands, done sustainably, for a better shared future. It's an exciting time to work in The Coca-Cola Company's flagship market. We're accelerating our momentum as the fastest-growing large consumer goods company in North America by putting people at the heart of our business and everything we do! As a Production Technician, you will complete and support various tasks associated with the manufacturing process of our beverages. Position-Related Duties and Key Responsibilities Manage and maintain equipment used in the manufacturing/production process. Maintain accurate records and logs as required Maintain equipment and area cleanliness to ensure compliance with all GMP standards. Maintain proper safety conditions of the area including immediately correcting or reporting safety and quality issues to your supervisor. Troubleshoot and correct machinery or quality problems. Work an 8-hour, 10-hour, or 12-hour shift or required hours necessary to meet business requirements Standard shift is 8 hours but must be able to work mandatory overtime as assigned per plant rules. Must be able to lift 60lbs. Standing for extended periods, walking, lifting, climbing, crouching, bending, reaching and stooping. Comply with all standard safety practices, safety rules, and all Company rules and policies Education and Additional Requirements High School diploma or GED required 1-3 year of general work experience required. Prior production / manufacturing experience preferred. Ability to operate manufacturing equipment. Basic math skills and reading comprehension. The Coca-Cola Company will not offer sponsorship for employment status (including, but not limited to, H1-B visa status and other employment-based nonimmigrant visas) for this position. Accordingly, all applicants must be currently authorized to work in the United States on a full-time basis and must not require The Coca-Cola Company's sponsorship to continue to work legally in the United States. Skills: Pay Range: $49,399 - $49,400 Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Our Purpose and Growth Culture: We are taking deliberate action to nurture an inclusive culture that is grounded in our company purpose, to refresh the world and make a difference. We act with a growth mindset, take an expansive approach to what's possible and believe in continuous learning to improve our business and ourselves. We focus on four key behaviors - curious, empowered, inclusive and agile - and value how we work as much as what we achieve. We believe that our culture is one of the reasons our company continues to thrive after 130+ years. Visit Our Purpose and Vision to learn more about these behaviors and how you can bring them to life in your next role at Coca-Cola. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. When we collect your personal information as part of a job application or offer of employment, we do so in accordance with industry standards and best practices and in compliance with applicable privacy laws.

Machine Technician - Kansas, City, MO Monday-Friday (hours TBD) About Packsize Packsize is redefining the way businesses and their customers use and experience packaging around the world. We build the technology, design the right solutions, and automate the processes that propel the industry forward. To us, packaging is much more than a box-it's delivering what's right for our customers, their customers, our people, and the planet. About the role A Packsize Machine Technician will install, configure and maintain Packsize equipment solutions onsite at a designated customer's facilities. They must be a creative problem solver with the ability to identify, analyze, maintain and repair complex mechanical equipment and answer difficult customer questions about product features. A Machine Technician will perform start-up testing and deliver customer training on product capabilities, features and general maintenance of the product. They will build and maintain a strong, trust-based customer relationship with their assigned customer(s) and will work closely with other supporting Packsize team members to provide exceptional customer service. What You'll Do Scheduling tasks at a customer's job sites Troubleshooting issues, quickly and effectively, using technical drawings and documentation Work cross-functionally with R&D, Software and Quality Engineering teams Performing routine maintenance and emergency services as they arise Analyze customer Key Performance Indicators (KPI's) to identify new or ongoing machine performance issues resulting in problem-solving and machine maintenance Continuous learning, including the customer's operational processes, packaging designs, technical specifications Installation of Packsize solutions and training others to use and maintain it Basic clerical and administrative duties, including timely reading and responding to emails, preparing and submitting expense reports, making travel arrangements, writing detailed technical reports, etc. Responsively and productively communicate information and ideas with Packsize and customer's personnel so they will understand. Must be able to exchange accurate information in these situations. Adhere to all Packsize and customer's safety requirements, and safety protocols related to exposed moving parts and electricity Excellent work ethic and time management skills Machine Operation Clearing jams, loading Z-fold, changing labels, changing bander paper and adding glue to the machine. What You'll Bring Customer service focus Knowledge of Windows platforms Knowledge of and effective use of hand tools Knowledge of mechanical platforms Ability to work independently with little or no direct supervision Basic Microsoft (Excel, Word) or Google Suite (Sheets, Docs) experience is helpful, but not required Associates Degree, Vocational Training or equivalent experience Bachelor's Degree in a related area preferred Working Environment and Physical Demands The following are representative of the typical working environment and physical demands of this position. To successfully perform the essential functions of this job, you will be required to: Communicate with others to exchange information Work within a production facility, warehouse, or manufacturing environment Move yourself in different positions to accomplish tasks in various environments, including tight and confined spaces Convey yourself great distances within and around various work sites and from one work site to another Remain in a stationary position, often standing for prolonged periods. Work in a noisy environment at various temperatures Move objects (equipment, machinery, and products) weighing up to 50 lbs Ascend and descend ladders, stairs, scaffolding, ramps, steps stools, and the like Perform tasks that require you to bend, stretch, push, pull, carry, and reach Travel Requirements All work is performed at customer's facilities Available on-call Overnight travel may be required, for initial and periodic training Ability to travel by vehicle or airplane, domestically. What We Offer The salary range for this role is $33 -$36 USD per hour; however, Packsize considers several factors when determining compensation when extending a job offer, including but not limited to, the role being offered, the associated responsibilities, the candidate's prior work experience, education/training, and any special skills. If this role excites you but you don't meet each requirement listed, we encourage you to apply anyway. At Packsize, we welcome applicants of all backgrounds and experiences and understand that the best candidates may come from the most unlikely of places. Packsize is an Equal Opportunity employer and is committed to diversity in its workforce. In compliance with applicable federal and state laws, Packsize policy of equal employment opportunity prohibits discrimination on the basis of race or ethnicity, religion, color, national origin, sex, age, sexual orientation, gender identity/expression, veteran's status, status as a qualified person with a disability, or genetic information. Individuals from historically underrepresented groups, such as minorities, women, qualified persons with disabilities, and protected veterans are strongly encouraged to apply. Reasonable accommodations in the application process will be provided to qualified individuals with disabilities.

THIS POSITION REQUIRES TRAVEL IN AND AROUND THE SURROUNDING STATES. Must be willing and able to travel outside of your local area. Paid lodging along with per diem/daily stipend. Once fully trained (approx 1-2 weeks - paid), you will be out on the road, traveling to and working in our customers' homes. Travel time and scheduling needs may vary. Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 million products assembled for our customers last year. We are the trusted provider to the world's largest brands, like Amazon, Walmart, Lowes, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” due to our hardworking technicians who have pride in all they do! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new treadmill or desk or mount their new TV. You have an entrepreneurial spirit and like the benefits and backing of a W2 organization. You enjoy independence and are self-motivated. You are a great communicator and enjoy interacting with customers. Customer satisfaction and high quality is your top goal when working. You're a problem-solver and proactively seek solutions. You are reliable and have a proven attendance record. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI team! What You'll Do You'll receive customer orders to complete installation or assembly jobs in customers' homes You'll communicate with the customer to confirm all appointments You'll assemble the product to National Assembler's specifications You'll build a strong rapport with customers and ensure 100% satisfaction by delivering good customer service and quality products What's In it For You $25/hr - $28/hr pay with the opportunity to earn more! (Full-time/Part-time available, hours will vary by location) Overtime Pay Mileage Reimbursement Weekly Pay Medical/Dental/Vision Insurance (Benefits begin after 60 days of employment) 401K W2 Employee Paid Certification Program (Get paid to learn a trade!) Travel opportunities A nationwide support staff that is focused on your personal development and success Rapid opportunities for advancement and career growth You'll Meet These Basic Job Requirements You must be able to lift 40 pounds You must have your own RELIABLE transportation You must be at least 21 years of age, have a valid Driver's License with auto insurance, and three years of driving history in the United States. You must have basic hand tools This job requires regular driving to customers' homes and businesses. The Fine Print NAI pays our “in-home” techs a competitive base compensation, with additional earnings being paid for every completed project. Our focus is on efficiency, quality, and safety above all else! Your will and your skill will enable you to determine the pay you desire for yourself. Our dedicated team will give you all the tools and training necessary to unlock your maximum potential. Full and part-time work is available, and jobs and schedules will vary depending on location. You will be a W2 employee (not a subcontractor!), meaning you will be trained, insured, paid appropriately for all hours, including overtime, and eligible for benefits. APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

Who We Are Born from a mission to make prescription eyewear affordable and accessible to everyone, Zenni Optical has been changing the way people see the world since 2003. With complete prescription pairs for adults and kids starting at under $10, we've grown into a global brand with over 51 million pairs of glasses sold - and counting! Based in the San Francisco Bay Area, we're proud to be the Official Eyewear of the San Francisco 49ers, Boston Celtics, Monster Jam, Ghost Gaming, TSM, Major League Pickleball and more. We've also partnered with tastemakers and designers like Chase Stokes, Jrue Holiday, and George and Claire Kittle to bring our brand to life in bold, meaningful ways. Innovation is at the heart of everything we do at Zenni - from our revolutionary EyeQLenz™ with Zenni ID Guard™ glasses to our cutting-edge VR Vision Screener, we're constantly exploring new ways to improve vision and enhance lives. For more information, please visit zenni.com/press. Candidate safety is important to us. Please note that all official communication will only be sent ********************** addresses. About the Role We are looking for a highly motivated Production Technician who is eager to learn and develop in the optical field onsite in Obetz, Ohio. The ideal candidate has strong organizational skills, open to feedback, and looking to grow their career. We have open roles in the following departments: Mounting, Surface Operator, Final Inspection, AR Coating, and Lens Analysis. If you are open to light physical labor (frames and lenses for eye glasses) and working with a fantastic team to help people everywhere buy more affordable glasses, we'd love to hear from you! The Obetz location offers a brand new and climate controlled facility with free daily meals and snacks! You'll have the opportunity to move up in the organization based on performance reviews. Want to learn more about our team? Watch our story and see how we're making an impact-check out the video below! 🎬👇 Shift: Monday - Thursday 7:00 am - 5:30 pm (must be available for overtime as needed, including weekends) Compensation: $17 - $19/hour (based on applicable experience) Responsibilities: Picking and unpacking lenses and frames for customer orders Prepping and loading lenses into machines Beginner level mounting lenses into frames Placing of receipted goods into correct locations Maintain good housekeeping, 6S Ensure daily / monthly KPI's are met Adherence to all company policies, processes, and procedures (i.e. Health & Safety Awareness) Report to management on activities and issues Inter-department running Basic Qualifications: Strong organizational skills Good literacy and numeracy skills You are proactive and have a strong ability to identify & problem solve Follow instructions and production schedules Preferred Qualifications: Previous warehousing experience is a bonus! Perks & Benefits: Annual Bonus Program Employee Paid - Health Care Plan (Medical, Dental & Vision) Retirement Plan (401K & matching) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Public Holidays) Training & Development Dental insurance Employee assistance program Flexible spending account Health savings account Vision insurance Free Lunch Daily Referral program As a condition of employment for this role, you will be required to undergo pre-employment drug testing in accordance with our company policies and applicable law. We look forward to hearing from you! We strive to build a diverse team of individuals with a broad range of experience and perspectives. We encourage you to apply even if you don't feel you meet all the qualifications. Zenni Optical is an equal opportunity workplace and considers applications without regard to race, color, national origin, gender identity, sexual orientation, age, citizenship, marital status, disability, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements.

At Numotion, we're on a mission to improve the lives of people with disabilities. As North America's largest provider of mobility products and services, we deliver personalized solutions from manual and power wheelchairs to medical supplies and other assistive technologies that support health, independence, and everyday participation. We're committed to a workforce of diverse backgrounds and experiences and to an inclusive environment shaped by open dialogue, attentive listening, and tangible, ongoing action. JOB PURPOSE: The Production Technician is responsible for building complex rehab equipment based on the order specifications received from ATPs and assisting with other warehouse duties as needed. KEY RESPONSIBILITIES: * Prepares equipment for delivery according to the order specifications. * Assures the assembled equipment matches the order specifications. * Assists with receiving as needed. * Assists with maintaining an organized warehouse. * Sustains a clean, organized and safe work environment in the shop/warehouse. * Participates in physical inventory counts and reconciliation. * Utilizes Numotion Leadership Principles to perform job with integrity, compliance, and values consistent with Numotion's mission. * Adheres to employee and customer confidentiality and complies with Numotion's policies and federal regulations. * Provides excellent customer service for all internal and external customers of the operations at all times. Provides solutions for customer concerns and continually focuses on customer service as our top priority. * The above duties and responsibilities are not an all-inclusive list but rather a general representation of the duties and responsibilities associated with this position. The duties and responsibilities will be subject to change based on organizational needs and/or as deemed necessary by management. REQUIRED QUALIFICATIONS, SKILLS, AND EXPERIENCE: * High School Diploma/GED in related field or an equivalent combination of education and directly relevant experience may be considered. * One year experience in relevant mechanical experience. * Basic computer skills (Word Processing, Email, Excel, and Internet). PREFERRED COMPETENCIES AND QUALIFICATIONS: * Ability to work in a fast-paced environment and multitask. * Proficient in using hand and power tools. * Experience with assembly of medical equipment is a plus. * Warehouse inventory is a plus. PHYSICAL WORK REQUIREMENTS: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Frequent use of hands, wrists, fingers associate with computer equipment. * Prolonged periods of time working at a desk and/or on a computer. * Occasionally move and reach with arms and hands. * Ability to lift/move up to 50 pounds. * Ability to communicate effectively. * Ability to work overtime as needed. At Numotion, we offer competitive compensation packages, including medical, dental and vision insurance, short and long term disability, a 401k and life insurance. Numotion is an equal opportunity employer. We strive for a workplace that reflects the communities we serve and do not tolerate discrimination against our employees, customers and partners regardless of ethnicity, disability, gender identity, sexual orientation, religion, age, citizenship, marital or veteran status. Numotion is a drug-free workplace. Candidates are required to pass a drug test before beginning employment. Required Skills

The Production Technician is responsible for operating and maintaining production equipment, including furnaces, casting, packaging and shop equipment, performing quality checks, and ensuring that manufacturing processes run smoothly and efficiently. This role requires attention to detail, adherence to safety standards, adherence to company SOP's and the ability to work effectively as part of a team to meet production goals. The Production Technician is capable of running up to (2) production lines. Essential Duties and Responsibilities Production Operations: Operate and monitor manufacturing equipment to produce high-quality products according to company SOP's and production schedules. Perform set-up, shut-down, adjustments, and minor maintenance of equipment to ensure optimal performance. Follow standard operating procedures (SOPs) and work instructions to maintain consistency in production. Quality Control: Conduct regular inspections and quality checks on products to ensure compliance with quality standards and specifications. Identify and report any defects or deviations from standards, taking corrective action as necessary. Maintenance and Troubleshooting: Perform routine maintenance and cleaning of equipment to ensure longevity and prevent breakdowns. Troubleshoot and resolve minor equipment issues, escalating complex problems to the team lead or manufacturing manager. Health and Safety: Adhere to all health and safety regulations, using personal protective equipment (PPE) as required. Report any safety hazards or incidents to the team lead and participate in safety training sessions. Maintain a clean and organized work area to promote a safe working environment. Documentation and Reporting: Accurately complete production logs, quality control reports, and other required documentation. Communicate production status, issues, and any required support to the team lead. Collaboration and Teamwork: Work collaboratively with other technicians, team leads, and departments to achieve production targets. Participate in team meetings, providing input on process improvements and operational efficiency. Continuous Improvement: Contribute to continuous improvement initiatives by suggesting ideas to enhance productivity, quality, and safety. Stay updated on industry best practices and new technologies that could benefit the production process. Other duties as assigned Minimum Qualifications (Knowledge, Skills, and Abilities) Ability to work between 8 AM and 4 PM is required. Skills and Competencies: Proficient in operating and maintaining manufacturing equipment. Strong attention to detail and commitment to quality. Good problem-solving skills and the ability to troubleshoot equipment issues. Knowledge of health and safety regulations in a manufacturing setting. Effective communication and teamwork skills. Basic computer skills, with the ability to use production management software and other relevant applications. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. PHYSICAL ACTIVITIES · While performing the functions of this job, the employee is regularly required to stand, walk, use hands to finger, handle, or feel, reach with hands and arms; frequently required to climb or balance, stoop, kneel, crouch, or crawl; and occasionally required to sit, talk or hear.· The employee must occasionally lift and/or move up to 75 pounds, regularly lift and/or move up to 55 pounds. Specific vision abilities required by this job include close vision.ENVIRONMENTAL CONDITIONS · While performing the functions of this job, the employee is regularly exposed to work near moving mechanical parts, extreme heat; frequently exposed to fumes or airborne particles; and occasionally exposed to work in high, precarious places, toxic or caustic chemicals, outdoor weather conditions, vibration.· The noise level in the work environment is usually loud.Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.

Production Technician Requirements: * At least 2 years of experience in at least two of the following: TPO, PVC, BUR, EPDM, Modified Bitumen, or Standing Seam Metal * Pass pre-employment drug and background screening * Reliable transportation * Ability to pass pre-employment drug and background screens. Must-Have Skills: * Aware of and able to perform the physical tasks associated with roofing * Ability to climb a ladder, work at various heights and outdoors in all seasons * Desire to work hard and positively contribute to our team Benefits of working for Phinney Industrial: * Comprehensive healthcare options * Industry-leading wages * Advancement opportunities * Training and educational opportunities * Start accruing paid leave on day 1 * Holiday pay * Performance and Year End Bonuses * 401K with 6% match * Life insurance Job Type: Full-time Benefits: * Dental insurance * Health insurance Schedule: * 8 hour shift * Overtime Experience: * Roofing: 3 years (Required) License/Certification: * Method of transportation (Required) Willingness to travel: * 25% (Preferred) Work Location: In person

• Work with mechanical systems: assembling and fine-tuning equipment built to the client specifications. • Assemble components and equipment based on blueprints and schematics • Use tools and machinery to assemble, install, or modify parts • Test and calibrate equipment to meet quality and safety standards Experience: • High school diploma or GED required • Skilled in hand tools, power tools, and machine shop equipment • Able to read blueprints and technical schematics • Mechanical aptitude

+ Role will support the execution of manufacturing/quality systems such as continuous improvement, technology transfer / new product introductions, manufacturing process/procedures, risk assessments, process validation, training, and non-conformance. They will apply process, operational, scientific expertise, basic compliance knowledge, and analytical and troubleshooting skills to support operations. You may also serve as the primary production process owner for process support systems and assist with process ownership responsibilities on more complex process systems. **Responsibilities may include, but are not limited to:** + Bring continuous improvement initiatives for cost reduction or cycle time reduction and participate in the assessment or implementation of such special projects or initiatives. + Support process monitoring parameters and control limits based off KPIs and recommend improvements. Collect process-monitoring data and support the assessment of deviations. Provide support of timely execution of the process monitoring quarterly reports. + As a document owner, initiate, revise, and approve manufacturing procedures to ensure all procedures reflect current operations. Assess process performance by; observation of floor operations, review of performance data and provide troubleshooting support. Evaluate, plan, and implement solutions for process improvement opportunities. + Assist in generation of training materials and / or in providing training on scientific or technical aspects of the process. Execute risk evaluations for new processes or changes to existing processes and issue the summary reports of these evaluations. + Participate in technology transfer / NPI process to assess requirements for documentation, materials, training, and equipment modifications. Assess, prioritize, justify, and provide implementation and project management support for process or equipment modification projects. + Ensure that all Non-conformance are triage within the established goal. Assist with investigations, corrective actions and NC/CAPA closure within established goal. Monitor and communicate incidents trends. Review equipment/system Root Cause Analysis investigations and support trend evaluations. **Basic Qualifications:** + Doctorate degree + Masters degree and 2 years of experience + Bachelors degree and 4 years of experience + Associates degree and 8 years of experience + High school diploma / GED and 10 years of experience **Must Have Skill Sets:** + Quality & Compliance Knowledge (GMP, CAPA, documentation control, risk assessments) + Technical Expertise in Manufacturing Processes + Process Improvement & Continuous Improvement **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** . "US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran"

Requisition ID: 914122 Store #: E00552 Lab Ops - Hard Coat Dip Dip Col Position: Full-Time Total Rewards: Benefits/Incentive Information If you've worn a pair of glasses, we've already met. We are a global leader in the design, manufacture, and distribution of ophthalmic lenses, frames, and sunglasses. We offer our industry stakeholders in over 150 countries access to a global platform of high-quality vision care products such as the Essilor brand, with Varilux, Crizal, Eyezen, Stellest and Transitions, iconic brands that consumers love such as Ray-Ban, Oakley, Persol and Oliver Peoples, as well as a network that offers consumers high-quality vision care and best-in-class shopping experiences such as Sunglass Hut, LensCrafters, and Target Optical, and leading e-commerce platforms. Our unique business model and relentless pursuit of operational excellence ensures that consumers everywhere have access to products. Balancing speed, efficiency and proximity, the Company manages a global supply chain with cutting-edge technology, based on centralization for frames and on a capillary network for lens finishing and prescription laboratories. In our dynamic environment, fueled by technology and innovation, our people have the space to pioneer new solutions. Join our global community of over 200,000 dedicated employees around the world in driving the transformation of the eyewear and eyecare industry. Discover more by following us on LinkedIn! GENERAL FUNCTION The Production Technician supports the production department by meeting productivity and quality standards. MAJOR DUTIES AND RESPONSIBILITIES Resolves practical problems and deals with variety of concrete situation variables where limited standardization exists. Performs tasks assigned to operations as per Master Task List. Provides training to technicians on plant operations. Promotes safe and healthy production environment and performs safe work practices. Establishes and performs high performance standards characterized by integrity. Supports field personnel and engineering staff in production data management. Leads and directs operators to ensure production integrity. Creates production graphs and analyze production trends using Aries, DSS, Excel and Access. Develops failure database for artificial lift and assists in analyzing performance. Supports data management and technical evaluation efforts of team. Recommends new approaches to streamline team's data management. BASIC QUALIFICATIONS High School Diploma or GED Previous experience working in a fast paced environment Ability to communicate clearly and concisely Ability to prioritize and meet strict deadlines This posting is for an existing vacancy within our business. Employee pay is determined by multiple factors, including geography, experience, qualifications, skills and local minimum wage requirements. In addition, you may also be offered a competitive bonus and/or commission plan, which complements a first-class total rewards package. Benefits may include health care, retirement savings, paid time off/vacation, and various employee discounts. EssilorLuxottica complies with all applicable laws related to the application and hiring process. If you would like to provide feedback regarding an active job posting, or if you are an individual with a disability who would like to request a reasonable accommodation, please call the EssilorLuxottica SpeakUp Hotline at ************ (be sure to provide your name, job id number, and contact information so that we may follow up in a timely manner) or email ********************************. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, national origin, social origin, social condition, being perceived as a victim of domestic violence, sexual aggression or stalking, religion, age, disability, sexual orientation, gender identity or expression, citizenship, ancestry, veteran or military status, marital status, pregnancy (including unlawful discrimination on the basis of a legally protected pregnancy or maternity leave), genetic information or any other characteristics protected by law. Native Americans in the US receive preference in accordance with Tribal Law. .job Title{ display:none !important; } Nearest Major Market: Columbus Job Segment: Supply Chain, Social Media, Supply, Ophthalmic, Operations, Marketing, Healthcare

Logistics at full potential. At GXO, we're constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you'll have the support to excel at work and the resources to build a career you can be proud of. 1st Shift, Monday - Friday, 8:00am - 5:00pm At GXO, we're constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. As the Production Technician Supervisor you will be responsible for supervising personnel, researching data, providing recommendations and working directly with customers to provide support and resolve issues. If you're ready to take your career to the next level, we have an opportunity for you to grow with GXO. Pay, benefits and more. We are eager to attract the best, so we offer competitive compensation and a generous benefits package, including full health insurance (medical, dental and vision), 401(k), life insurance, disability and more. What you'll do on a typical day: * Act as the first line of communication with customers and warehouse sites; advise customers of service failures and coordinate resolutions * Audit daily order processes; ensure all orders are sent to each site * Monitor and report all errors for performance tracking * Work creatively with the Inventory Control team, Transportation department and warehouse sites on service resolutions * Oversee service provider performance and engage providers for service improvement * Communicate order changes with warehouses and coordinate shipment schedules * Maintain all department ISO compliance documents and train all personnel within the department to the required standards, including the Director and Manager of the department Travel Requirements: * Ability to travel up to 75% of the * Must possess a REAL ID-compliant driver's license or passport to comply with federal travel regulations. * Familiarity and ability to comply with TSA security procedures. Ability to travel domestically via road, rail and air as required for the role and pursuant to Company travel and expense requirements What you need to succeed at GXO: At a minimum, you'll need: * 2 years of relevant work experience * Experience with Microsoft Office and Windows applications; ability to create complex formulas in Excel It'd be great if you also have: * Associate degree in Transportation or Business * 2 years of experience in customer service, distribution or logistics in a manufacturing environment * 2 years of experience in transportation and operations * Availability to work extended hours as needed, which may include early mornings, evenings and weekends * Capacity to quickly learn and achieve proficiency in new software applications * Excellent verbal and written communication skills; ability to present clean, organized and thorough information and data appropriate for intended audience * Effective organizational and leadership skills; able to use a variety of interpersonal styles and communication methods to effectively adapt to new work structures, processes or cultures * Ability to perform complex analyses of data, processes, policies, procedures and/or systems; experience producing unambiguous, comprehensive and accurate interpretations We engineer faster, smarter, leaner supply chains. GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. We are proud to be an Equal Opportunity employer including Disabled/Veterans. GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement here.

Location: Groveport, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Manufacturing Technician for our client. This position is responsibilities include using precision measuring instruments, performing equipment testing, interpreting mechanical drawings, conducting quality inspections, preparing products for shipment, and maintaining a clean and organized work area.What's a Typical Day Like? Work with a team to assemble, troubleshoot, and repair company equipment Use precision measuring instruments and gauges Perform equipment testing Interpret mechanical drawings Conduct quality inspections on products and parts Prepare finished products for shipment Maintain a clean and orderly work area What Are the Requirements of the Job? Experienced in manufacturing, assembly, or other related fields for 2-4 years Experienced with 5T-15T overhead cranes Familiar with assembly tools and metal shop equipment Experience with basic hand tools Mathematically and mechanically inclined. Able to handle physical workload Able to pass a drug test and background check Able to work with minimum supervision in a multi-task in a fast-paced environment Ability to work in fast-paced environment. Ability to move or lift up to 50+ lbs. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Ability to utilize hand/eye coordination. Capability to stand for prolonged periods of time Communication skills. How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

Job Description M.H. Eby, Inc.- a leading manufacturer of aluminum trailers and truck bodies is looking for experienced laborers to work in our fast-growing company. Candidates must be trainable and willing to learn! TIG Welders Fabricators Assemblers First and Second shift positions available! At M.H. EBY, Inc., we foster a culture that rewards initiative, hard work, and teamwork. Join our dynamic team and grow your career with us. Benefits: * Paid Time Off after 90 days * Paid Holidays * 401K & Profit-Sharing Plan * Medical and Dental insurance * FSA * Life Insurance * Short Term Disability Insurance General tasks may include welding and/or fabricating aluminum, operating CNC machinery, operating forklifts and overhead cranes, operating various hand tools, and much more. On-the-job experience is not required, but good attitude, good work ethic, and a team mentality is a must. MH Eby, Inc is a third-generation family-owned company established in 1938. Headquartered in Lancaster County, Pennsylvania with 7 additional locations spanning from Ohio to Montana, Eby designs and builds aluminum transportation equipment including Livestock, Grain and Equipment trailers, and a full line of truck bodies. All locations offer comprehensive service and parts to support our customers. All applicants will be considered. Potential hires must pass a physical and drug screen before starting employment. Experience is preferred but we will train the right candidate. Starting wage based upon experience. #hc199228

Production Technician Reports to: Production Manager Company: Synova Bundy Baking Solutions is a global family business with a rich legacy rooted in genuine care for everyone connected with the organization. Founded by Russ Bundy 60 years ago, the company started by selling baking pans from the trunk of his car and has since grown into an international leader in baking solutions. Its extensive reach encompasses designing, manufacturing, coating, and distributing high-quality bakery equipment and supplies. Today, Bundy Baking Solutions operates worldwide, employing nearly 2,000 people across 11 countries and multiple business units and manufacturing facilities. We plan to offer a competitive salary, a great benefits package, a genuine company culture, and the rewarding opportunity to have a significant impact on a global family business. Speaking of culture, be sure to check out the CREED section of our careers page: ********************************************* Position Summary: Support the food grade facility as a member of the plant operations team following environmental health and safety, and food safety guidelines. This includes unloading trucks of raw materials, following recipes to mix desired components, packaging the product in drum/pail/tote, loading the product on to trucks, troubleshooting/repair of equipment and maintaining facility sanitation. Primary Duties and Responsibilities include the following: Unload raw material trucks using pumps and hoses Unload packaging material trucks using forklifts Follow the facility environmental, health and safety program guidelines Support the Maintenance Manager with equipment troubleshooting and repair Follow written procedures and recipes to mix product components Package the finished product in drums/totes/pails Support facility sanitation program to ensure site is perpetually audit ready. Ensure finished product is packaged properly and leaves the site in phenomenal condition Load the finished product using a forklift Conduct in-process lab testing Complete batch paperwork and truck bills-of-lading This position is responsible for producing, packaging, and shipping on time deliveries to our customers. Adhering to GMPs, food grade standards, and maintaining a high level of safety, quality, and customer service. The duties include blending, sampling, documentation, and packaging of products in totes, drums, and pails. Loading and unloading of bulk tanker trailers. Operating a forklift to store finished goods, receive supplies, and load tractor trailers or containers. Qualifications, Knowledge and Skills: Three years in a production environment preferably in the food industry. Builds collaborative relationships with other team members Demonstrated strong forklift driving abilities Attention to detail and accuracy, sort, check, count, and verify numbers Good mathematical background Demonstrated mechanical aptitude Good communication skills (written and verbal); ability to listen, and excellent grammar Ability to work independently, self-starter, energetic Knowledge of MS Office, Excel and Word Competent organizing and prioritizing skills to work efficiently Flexibility to adapt to all situations and work varied hours; possible weekends or evenings Ability to communicate effectively in challenging situations Ability to anticipate work needs and follow through with minimum direction Experienced in computerized inventory management system Experienced in operating a computer-controlled process Requirements include strong attention to detail, good communication skills, knowledge of production, problem-solving skills, good power of observation, analytical thinking skills, a positive attitude and willingness to learn. Preferred experience include history in a manufacturing environment with food grade certifications, basic math skills, familiarity with computerized inventory management, familiarity with a computerized control process. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. Management maintains the right to assign or reassign duties and responsibilities to this job at any time. #IND123

At Kelly Services, we work with the best. Our clients include 99 of the Fortune 100 TM companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. Job Description Kelly Services has been providing outstanding employment opportunities to the most talented individuals in the marketplace. We are proud to offer a temporary opportunity to work as a Manufacturing Technician for one of our top Life Science clients located in West Chester, OH. By working with Kelly in this role, you would be eligible for: - A competitive hourly pay rate with weekly payment via direct deposit - Online continuing education via the Kelly Learning Center - Several employee discounts - And more! *This is a 6+ month temporary position at 40 hours per week* Qualifications . Experience working with machines and performing repairs 2. High school diploma or equivalent Additional Information All your information is kept confidential as per EEO standards. Why is this a great opportunity? The answer is simple…working at our client is more than a job; it's a career. The opportunities are diverse whether you are right at the start of your career or whether you are looking for new challenges this is the job for you, so be quick and apply now!

Job Description Majestic Plastics is a Custom Plastic Injection Molder and have strived for the upmost quality of our product for the last 25 years. We are 100% Employee-Owned! Ready to dive into the thrilling world of manufacturing? Join our team at Majestic Plastics in Bellefontaine, Ohio, where you'll become an essential part of our Injection Molding operations! As a Manufacturing Technician, you'll work hands-on with advanced machines and presses, helping to shape plastic components for the automotive industry. This exciting onsite role offers a competitive pay range of $19.00 - $22.00 per hour. Picture yourself problem-solving daily, pushing the boundaries of innovation, and collaborating with energetic molders in a factory environment that values safety and excellence. You will have benefits such as Snack/Drink Room, Medical, Dental, Vision, Company paid Life Insurance, Paid Time Off, 401k Plan with Company Match, Monthly Perfect Attendance Bonus, ESOP - Employee Stock Ownership Plan, Holiday Pay, and Company paid Disability. This position invites you to explore the art of automation while mastering the maintenance of our cutting-edge equipment. Don't miss your chance to be part of something majestic-apply today! Are you excited about this Manufacturing Technician job? As a Manufacturing Technician at Majestic Plastics in Bellefontaine, Ohio, your role will involve crucial mold setup and startups, ensuring our injection molding machines and equipment are primed for success. Get ready to flex your problem-solving muscles as you tackle maintenance and repairs on our advanced machines while supporting automation and ultrasonic welding setups. Your expertise will directly contribute to our production activities, fostering a fun and energetic factory environment where every day brings fresh challenges and opportunities for innovation. Join us, and let's make magic happen together in the world of injection molding! Knowledge and skills required for the position are: Experience with injection molding would be nice but always willing to train the right individual Maintenance and repair abilities Good attendance Attention to detail Make your move We're looking for talented individuals like you to join our team and help us achieve our goals. If you're passionate, driven, and committed to making a difference, we want to hear from you! Don't wait - apply now and take the first step towards a fulfilling career with endless possibilities. Let's work together to make great things happen!