Electronics Technician jobs at Liberty Oilfield Services - 691 jobs

Performs maintenance and repair activities on gas compression and/or process equipment at customer's location, as directed. Performs maintenance and repair activities on gas compression and/or process equipment at customer's location, as directed. Essential Duties: Maintains a safe and well-organized work environment. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple compressor configurations. Performs Major Maintenance (MM), Overhauls and MOB/DEMOB as part of a team. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple compressor configurations. Performs Major Maintenance (MM), Overhauls and MOB/DEMOB as part of a team. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a subject matter expert for equipment in assigned area. Mentors and teaches company maintenance standards. Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a subject matter expert for equipment in assigned area. Mentors and teaches company maintenance standards. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following; other duties may be assigned) Maintains and repairs electrical equipment and instrumentation. Monitors, maintains, and repairs plant Distributed Control System (DCS). Monitors, maintain, and repairs gas turbine, steam turbine control systems, generators, transformers, and switchgear. Maintain, calibrate and repair plant electrical, instrumentation, and control systems. Perform routine trouble shooting activities. Use Computerized Maintenance Management System (CMMS) to effectively accomplish required maintenance in and efficient and organized manner. Optimize plant preventative maintenance program to meet OEM recommendations, regulatory requirements, and corporate maintenance philosophy. Responsible for maintaining logs, manuals, records, blueprints and operating procedures in a neat and professional manner. Provide written reports on control system conditions when required. Incorporates safe behavior into all activities and consistently complies with all established safety and health policies and procedures, helps to identify and eliminate or actively manage risks in all work activities. Job Responsibilities * Senior-level; recognized technical expertise in own and possibly related functions. * Performs a variety of complex technical service/support duties requiring specialized knowledge. * Regularly makes decisions on non-routine or escalated technical issues. * Independently prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area. * Checks own work and possibly the work of others; work results are of the highest quality standards and advanced technical competency. * Errors may be serious, usually not subject to direct verification or check. * Duties and tasks reflect substantial variety and complexity. * Resolves the most complex technical issues, conferring with Team Leader occasionally; may serve as resource to others in resolution of complex issues. * Works under limited supervision. * Prioritizes own weekly schedule and may guide others in the completion of tasks within clearly defined schedules as set by management. * Regularly provides on-the-job skills training to others in complex technical areas. Job Requirements * High School Diploma, degree from technical/vocational school or equivalent. * Senior-level; minimum of 5 years of experience in instrument/electrical and control system applications. * Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity and mathematics. * Experience with DCS programming and configuration * Advanced certifications/licensures. Valid state driver's license. Additional Calpine Information: * Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. * Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

Calpine, a business unit of Constellation Energy Corporation (Nasdaq: CEG), is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. With 79 energy facilities in operation, Calpine's fleet has the capacity to generate approximately 27,000 MW of electricity - enough to power approximately 27 million homes. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following; other duties may be assigned) Maintains and repairs electrical equipment and instrumentation. Monitors, maintains, and repairs plant Distributed Control System (DCS). Monitors, maintain, and repairs gas turbine, steam turbine control systems, generators, transformers, and switchgear. Maintain, calibrate and repair plant electrical, instrumentation, and control systems. Perform routine trouble shooting activities. Use Computerized Maintenance Management System (CMMS) to effectively accomplish required maintenance in and efficient and organized manner. Optimize plant preventative maintenance program to meet OEM recommendations, regulatory requirements, and corporate maintenance philosophy. Responsible for maintaining logs, manuals, records, blueprints and operating procedures in a neat and professional manner. Provide written reports on control system conditions when required. Incorporates safe behavior into all activities and consistently complies with all established safety and health policies and procedures, helps to identify and eliminate or actively manage risks in all work activities. Job Responsibilities Senior-level; recognized technical expertise in own and possibly related functions. Performs a variety of complex technical service/support duties requiring specialized knowledge. Regularly makes decisions on non-routine or escalated technical issues. Independently prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area. Checks own work and possibly the work of others; work results are of the highest quality standards and advanced technical competency. Errors may be serious, usually not subject to direct verification or check. Duties and tasks reflect substantial variety and complexity. Resolves the most complex technical issues, conferring with Team Leader occasionally; may serve as resource to others in resolution of complex issues. Works under limited supervision. Prioritizes own weekly schedule and may guide others in the completion of tasks within clearly defined schedules as set by management. Regularly provides on-the-job skills training to others in complex technical areas. Job Requirements High School Diploma, degree from technical/vocational school or equivalent. Senior-level; minimum of 5 years of experience in instrument/electrical and control system applications. Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity and mathematics. Experience with DCS programming and configuration Advanced certifications/licensures. Valid state driver's license. Additional Calpine Information: Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following; other duties may be assigned) Maintains and repairs electrical equipment and instrumentation. Monitors, maintains, and repairs plant Distributed Control System (DCS). Monitors, maintain, and repairs gas turbine, steam turbine control systems, generators, transformers, and switchgear. Maintain, calibrate and repair plant electrical, instrumentation, and control systems. Perform routine trouble shooting activities. Use Computerized Maintenance Management System (CMMS) to effectively accomplish required maintenance in and efficient and organized manner. Optimize plant preventative maintenance program to meet OEM recommendations, regulatory requirements, and corporate maintenance philosophy. Responsible for maintaining logs, manuals, records, blueprints and operating procedures in a neat and professional manner. Provide written reports on control system conditions when required. Incorporates safe behavior into all activities and consistently complies with all established safety and health policies and procedures, helps to identify and eliminate or actively manage risks in all work activities. Job Responsibilities * Senior-level; recognized technical expertise in own and possibly related functions. * Performs a variety of complex technical service/support duties requiring specialized knowledge. * Regularly makes decisions on non-routine or escalated technical issues. * Independently prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area. * Checks own work and possibly the work of others; work results are of the highest quality standards and advanced technical competency. * Errors may be serious, usually not subject to direct verification or check. * Duties and tasks reflect substantial variety and complexity. * Resolves the most complex technical issues, conferring with Team Leader occasionally; may serve as resource to others in resolution of complex issues. * Works under limited supervision. * Prioritizes own weekly schedule and may guide others in the completion of tasks within clearly defined schedules as set by management. * Regularly provides on-the-job skills training to others in complex technical areas. Job Requirements * High School Diploma, degree from technical/vocational school or equivalent. * Senior-level; minimum of 5 years of experience in instrument/electrical and control system applications. * Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity and mathematics. * Experience with DCS programming and configuration * Advanced certifications/licensures. Valid state driver's license. Additional Calpine Information: * Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. * Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

Electronic Technician Trainee (Local 57) - Ogden, UT - #114274 Job Details | PacifiCorp By continuing to use this website you consent to our use of cookies Accept Close Skip to main content * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships Search by Keyword Search by Location * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships View Profile Search by Keyword Search by Location Select how often (in days) to receive an alert: Create Alert × Select how often (in days) to receive an alert: Electronic Technician Trainee (Local 57) - Ogden, UT - #114274 Apply now " Date: Jan 1, 2026 Location: OGDEN, UT, US, 84401 Company: PacifiCorp Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. Responsibilities As an Electronic Technician Trainee, you will be trained to install, test, certify, and maintain PacifiCorp communications systems including but not limited to the following voice and data communication systems; telephone systems, analog and digital microwave radio systems, land mobile radio systems, SCADA and MAS systems, power line carrier equipment, telemetry, tone relay, fiber optics nodes and cable, and associated switching and termination equipment. Configure and troubleshoot equipment and create detailed work and maintenance reports. Typically will be assigned to work with other company personnel on work assignments. Responsible for vehicles, tools and materials supplied by the Company for use in the role. Location listed for this position is for TRAINING ONLY. You may be assigned to a new location upon completion of the trainee program. You will be required to bid to a regular, permanent position and location after successful completion of the training course. Requirements * Two-year College or technical degree in electrical, electrical apprenticeship, or equivalent experience (military experience, etc.) * FCC General Radiotelephone Operators License (GROL) with elements 1 & 3. * Proficient computer skills (Microsoft Windows, Internet browsers and Excel). * Must pass PacifiCorp's' Electronic Technician Trainee pool exam. * Must have a valid driver's license with evidence of a safe driving record. * Must be qualified to operate a commercial motor vehicle (CMV). * Must be able to perform off-road travel in extreme weather conditions. Preferences * Advanced computer skills. * Previous experience as an electronic or communications technician in a utility environment. * Winter survival and snow cat training. Additional Information Req Id: 114274 Company Code: PacifiCorp #PM25 Primary Location: OGDEN, UT Department: Power Delivery Schedule: Full Time Hiring Range: $55.51 Personnel Subarea: IBEW Local 57 Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations. Nearest Major Market: Salt Lake City Nearest Secondary Market: Ogden

Electronic Technician Trainee (Local 57) - Salt Lake City, UT - #114275 Job Details | PacifiCorp By continuing to use this website you consent to our use of cookies Accept Close Skip to main content * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships Search by Keyword Search by Location * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships View Profile Search by Keyword Search by Location Select how often (in days) to receive an alert: Create Alert × Select how often (in days) to receive an alert: Electronic Technician Trainee (Local 57) - Salt Lake City, UT - #114275 Apply now " Date: Jan 1, 2026 Location: SALT LAKE CITY, UT, US, 84104 Company: PacifiCorp Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. Responsibilities As an Electronic Technician Trainee, you will be trained to install, test, certify, and maintain PacifiCorp communications systems including but not limited to the following voice and data communication systems; telephone systems, analog and digital microwave radio systems, land mobile radio systems, SCADA and MAS systems, power line carrier equipment, telemetry, tone relay, fiber optics nodes and cable, and associated switching and termination equipment. Configure and troubleshoot equipment and create detailed work and maintenance reports. Typically will be assigned to work with other company personnel on work assignments. Responsible for vehicles, tools and materials supplied by the Company for use in the role. Location listed for this position is for TRAINING ONLY. You may be assigned to a new location upon completion of the trainee program. You will be required to bid to a regular, permanent position and location after successful completion of the training course. Requirements * Two-year College or technical degree in electrical, electrical apprenticeship, or equivalent experience (military experience, etc.) * FCC General Radiotelephone Operators License (GROL) with elements 1 & 3. * Proficient computer skills (Microsoft Windows, Internet browsers and Excel). * Must pass PacifiCorp's' Electronic Technician Trainee pool exam. * Must have a valid driver's license with evidence of a safe driving record. * Must be qualified to operate a commercial motor vehicle (CMV). * Must be able to perform off-road travel in extreme weather conditions. Preferences * Advanced computer skills. * Previous experience as an electronic or communications technician in a utility environment. * Winter survival and snow cat training. Additional Information Req Id: 114275 Company Code: PacifiCorp #PM25 Primary Location: SALT LAKE CITY, UT Department: Power Delivery Schedule: Full Time Hiring Range: $55.51 Personnel Subarea: IBEW Local 57 Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations. Nearest Major Market: Salt Lake City

Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. Responsibilities As an Electronic Technician Trainee, you will be trained to install, test, certify, and maintain PacifiCorp communications systems including but not limited to the following voice and data communication systems; telephone systems, analog and digital microwave radio systems, land mobile radio systems, SCADA and MAS systems, power line carrier equipment, telemetry, tone relay, fiber optics nodes and cable, and associated switching and termination equipment. Configure and troubleshoot equipment and create detailed work and maintenance reports. Typically will be assigned to work with other company personnel on work assignments. Responsible for vehicles, tools and materials supplied by the Company for use in the role. Location listed for this position is for TRAINING ONLY. You may be assigned to a new location upon completion of the trainee program. You will be required to bid to a regular, permanent position and location after successful completion of the training course. Requirements Two-year College or technical degree in electrical, electrical apprenticeship, or equivalent experience (military experience, etc.) FCC General Radiotelephone Operators License (GROL) with elements 1 & 3. Proficient computer skills (Microsoft Windows, Internet browsers and Excel). Must pass PacifiCorp's' Electronic Technician Trainee pool exam. Must have a valid driver's license with evidence of a safe driving record. Must be qualified to operate a commercial motor vehicle (CMV). Must be able to perform off-road travel in extreme weather conditions. Preferences Advanced computer skills. Previous experience as an electronic or communications technician in a utility environment. Winter survival and snow cat training. Additional Information Req Id: 114273 Company Code: PacifiCorp #PM25 Primary Location: PLEASANT GROVE, UT Department: Power Delivery Schedule: Full Time Hiring Range: $55.51 Personnel Subarea: IBEW Local 57 Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations.

Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. Responsibilities As an Electronic Technician Trainee, you will be trained to install, test, certify, and maintain PacifiCorp communications systems including but not limited to the following voice and data communication systems; telephone systems, analog and digital microwave radio systems, land mobile radio systems, SCADA and MAS systems, power line carrier equipment, telemetry, tone relay, fiber optics nodes and cable, and associated switching and termination equipment. Configure and troubleshoot equipment and create detailed work and maintenance reports. Typically will be assigned to work with other company personnel on work assignments. Responsible for vehicles, tools and materials supplied by the Company for use in the role. Location listed for this position is for TRAINING ONLY. You may be assigned to a new location upon completion of the trainee program. You will be required to bid to a regular, permanent position and location after successful completion of the training course. Requirements Two-year College or technical degree in electrical, electrical apprenticeship, or equivalent experience (military experience, etc.) FCC General Radiotelephone Operators License (GROL) with elements 1 & 3. Proficient computer skills (Microsoft Windows, Internet browsers and Excel). Must pass PacifiCorp's' Electronic Technician Trainee pool exam. Must have a valid driver's license with evidence of a safe driving record. Must be qualified to operate a commercial motor vehicle (CMV). Must be able to perform off-road travel in extreme weather conditions. Preferences Advanced computer skills. Previous experience as an electronic or communications technician in a utility environment. Winter survival and snow cat training. Additional Information Req Id: 114278 Company Code: PacifiCorp #PM25 Primary Location: DRAPER, UT Department: Power Delivery Schedule: Full Time Hiring Range: $55.51 Personnel Subarea: IBEW Local 57 Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations.

Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. Responsibilities As an Electronic Technician Trainee, you will be trained to install, test, certify, and maintain PacifiCorp communications systems including but not limited to the following voice and data communication systems; telephone systems, analog and digital microwave radio systems, land mobile radio systems, SCADA and MAS systems, power line carrier equipment, telemetry, tone relay, fiber optics nodes and cable, and associated switching and termination equipment. Configure and troubleshoot equipment and create detailed work and maintenance reports. Typically will be assigned to work with other company personnel on work assignments. Responsible for vehicles, tools and materials supplied by the Company for use in the role. Location listed for this position is for TRAINING ONLY. You may be assigned to a new location upon completion of the trainee program. You will be required to bid to a regular, permanent position and location after successful completion of the training course. Requirements Two-year College or technical degree in electrical, electrical apprenticeship, or equivalent experience (military experience, etc.) FCC General Radiotelephone Operators License (GROL) with elements 1 & 3. Proficient computer skills (Microsoft Windows, Internet browsers and Excel). Must pass PacifiCorp's' Electronic Technician Trainee pool exam. Must have a valid driver's license with evidence of a safe driving record. Must be qualified to operate a commercial motor vehicle (CMV). Must be able to perform off-road travel in extreme weather conditions. Preferences Advanced computer skills. Previous experience as an electronic or communications technician in a utility environment. Winter survival and snow cat training. Additional Information Req Id: 114274 Company Code: PacifiCorp #PM25 Primary Location: OGDEN, UT Department: Power Delivery Schedule: Full Time Hiring Range: $55.51 Personnel Subarea: IBEW Local 57 Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations.

Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. Responsibilities As an Electronic Technician Trainee, you will be trained to install, test, certify, and maintain PacifiCorp communications systems including but not limited to the following voice and data communication systems; telephone systems, analog and digital microwave radio systems, land mobile radio systems, SCADA and MAS systems, power line carrier equipment, telemetry, tone relay, fiber optics nodes and cable, and associated switching and termination equipment. Configure and troubleshoot equipment and create detailed work and maintenance reports. Typically will be assigned to work with other company personnel on work assignments. Responsible for vehicles, tools and materials supplied by the Company for use in the role. Location listed for this position is for TRAINING ONLY. You may be assigned to a new location upon completion of the trainee program. You will be required to bid to a regular, permanent position and location after successful completion of the training course. Requirements Two-year College or technical degree in electrical, electrical apprenticeship, or equivalent experience (military experience, etc.) FCC General Radiotelephone Operators License (GROL) with elements 1 & 3. Proficient computer skills (Microsoft Windows, Internet browsers and Excel). Must pass PacifiCorp's' Electronic Technician Trainee pool exam. Must have a valid driver's license with evidence of a safe driving record. Must be qualified to operate a commercial motor vehicle (CMV). Must be able to perform off-road travel in extreme weather conditions. Preferences Advanced computer skills. Previous experience as an electronic or communications technician in a utility environment. Winter survival and snow cat training. Additional Information Req Id: 114275 Company Code: PacifiCorp #PM25 Primary Location: SALT LAKE CITY, UT Department: Power Delivery Schedule: Full Time Hiring Range: $55.51 Personnel Subarea: IBEW Local 57 Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations.

Electronic Technician Trainee (Local 57) - Pleasant Grove, UT - #114273 Job Details | PacifiCorp By continuing to use this website you consent to our use of cookies Accept Close Skip to main content * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships Search by Keyword Search by Location * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships View Profile Search by Keyword Search by Location Select how often (in days) to receive an alert: Create Alert × Select how often (in days) to receive an alert: Electronic Technician Trainee (Local 57) - Pleasant Grove, UT - #114273 Apply now " Date: Jan 1, 2026 Location: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. Responsibilities As an Electronic Technician Trainee, you will be trained to install, test, certify, and maintain PacifiCorp communications systems including but not limited to the following voice and data communication systems; telephone systems, analog and digital microwave radio systems, land mobile radio systems, SCADA and MAS systems, power line carrier equipment, telemetry, tone relay, fiber optics nodes and cable, and associated switching and termination equipment. Configure and troubleshoot equipment and create detailed work and maintenance reports. Typically will be assigned to work with other company personnel on work assignments. Responsible for vehicles, tools and materials supplied by the Company for use in the role. Location listed for this position is for TRAINING ONLY. You may be assigned to a new location upon completion of the trainee program. You will be required to bid to a regular, permanent position and location after successful completion of the training course. Requirements * Two-year College or technical degree in electrical, electrical apprenticeship, or equivalent experience (military experience, etc.) * FCC General Radiotelephone Operators License (GROL) with elements 1 & 3. * Proficient computer skills (Microsoft Windows, Internet browsers and Excel). * Must pass PacifiCorp's' Electronic Technician Trainee pool exam. * Must have a valid driver's license with evidence of a safe driving record. * Must be qualified to operate a commercial motor vehicle (CMV). * Must be able to perform off-road travel in extreme weather conditions. Preferences * Advanced computer skills. * Previous experience as an electronic or communications technician in a utility environment. * Winter survival and snow cat training. Additional Information Req Id: 114273 Company Code: PacifiCorp #PM25 Primary Location: PLEASANT GROVE, UT Department: Power Delivery Schedule: Full Time Hiring Range: $55.51 Personnel Subarea: IBEW Local 57 Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations. Nearest Major Market: Salt Lake City

Electronic Technician Trainee (Local 57) - Draper, UT - #114278 Job Details | PacifiCorp By continuing to use this website you consent to our use of cookies Accept Close Skip to main content * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships Search by Keyword Search by Location * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships View Profile Search by Keyword Search by Location Select how often (in days) to receive an alert: Create Alert × Select how often (in days) to receive an alert: Electronic Technician Trainee (Local 57) - Draper, UT - #114278 Apply now " Date: Jan 1, 2026 Location: DRAPER, UT, US, 84020 Company: PacifiCorp Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. Responsibilities As an Electronic Technician Trainee, you will be trained to install, test, certify, and maintain PacifiCorp communications systems including but not limited to the following voice and data communication systems; telephone systems, analog and digital microwave radio systems, land mobile radio systems, SCADA and MAS systems, power line carrier equipment, telemetry, tone relay, fiber optics nodes and cable, and associated switching and termination equipment. Configure and troubleshoot equipment and create detailed work and maintenance reports. Typically will be assigned to work with other company personnel on work assignments. Responsible for vehicles, tools and materials supplied by the Company for use in the role. Location listed for this position is for TRAINING ONLY. You may be assigned to a new location upon completion of the trainee program. You will be required to bid to a regular, permanent position and location after successful completion of the training course. Requirements * Two-year College or technical degree in electrical, electrical apprenticeship, or equivalent experience (military experience, etc.) * FCC General Radiotelephone Operators License (GROL) with elements 1 & 3. * Proficient computer skills (Microsoft Windows, Internet browsers and Excel). * Must pass PacifiCorp's' Electronic Technician Trainee pool exam. * Must have a valid driver's license with evidence of a safe driving record. * Must be qualified to operate a commercial motor vehicle (CMV). * Must be able to perform off-road travel in extreme weather conditions. Preferences * Advanced computer skills. * Previous experience as an electronic or communications technician in a utility environment. * Winter survival and snow cat training. Additional Information Req Id: 114278 Company Code: PacifiCorp #PM25 Primary Location: DRAPER, UT Department: Power Delivery Schedule: Full Time Hiring Range: $55.51 Personnel Subarea: IBEW Local 57 Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations. Nearest Major Market: Salt Lake City

Since 1933 Heath Consultants Incorporated is the leading provider of services and equipment to the natural gas and utility industry. Heath develops and manufactures its equipment in its own world-class facility located in Houston, TX. Heath Consultants Incorporated is currently looking for a service-minded team player to bring their skills to a stable industry. If you are looking for a long-term career with a great team, we want to talk to you. This individual will assemble, calibrate and test instruments as part of product development or product improvement. They should be able to perform testing in the lab and in the field using various test equipment, document and organize test data and provide technical support for new products and perform repairs to meet internal and external stakeholders' needs. Instruments are used to safely protect lives and property and reduce emissions associated with natural gas supply chain. *PLEASE NOTE: This is an onsite position located near Hobby Airport in Houston, TX. RESPONSIBILITIES: Perform design verification testing and calibration on instruments and assemblies for new products or to sustain existing products and provide detailed documentation of test procedure and its results. Troubleshoot and repair instruments, assemblies, and subassemblies. Build test jigs and breadboard circuits as needed to help with product development and testing. Construct components and/or subassemblies and assembles electronic equipment. Use & maintain laboratory test equipment such as Oscilloscopes, Logic analyzers and spectrum analyzers. Train customers, distributors, manufacturing and repair technicians. Record, compute and analyze necessary test data and complete necessary documentation. Recommend improvements in product design, quality, procedures, components, and processes. Report improper operations, defective materials and unusual conditions to supervisors. Follow safety rules and regulations and maintains a neat, clean and orderly work area. Perform other duties as requested by supervisor. REQUIREMENTS: Two-year technical degree beyond High School diploma or equivalent is required. Must have formal training in electronics technology. Minimum 5-7 years' experience in the electrical/electronics, mechanical, hydraulic and pneumatic fields with emphasis on electrical/electronics in an R&D or product development. Must be computer literate and well versed with MS Office products. Some ability to use EDA software applications such as Altium, Eagle, Allegro etc PHYSICAL REQUIREMENTS: While performing the duties of this job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel objects, tools, or controls and to climb or balance. The employee is occasionally required to walk; reach with hands and arms; stoop, kneel, crouch or crawl; and talk or hear. The employee must regularly lift and move up to 10 pounds, frequently lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus. Salary Range: $60,000 - $70,000 Schedule: Full-time, Monday through Friday Offers of employment are contingent on passing a pre-employment background check and drug screening Heath Consultants Incorporated is an equal opportunity employer and offers competitive salary

Job Description Since 1933 Heath Consultants Incorporated is the leading provider of services and equipment to the natural gas and utility industry. Heath develops and manufactures its equipment in its own world-class facility located in Houston, TX. Heath Consultants Incorporated is currently looking for a service-minded team player to bring their skills to a stable industry. If you are looking for a long-term career with a great team, we want to talk to you. This individual will assemble, calibrate and test instruments as part of product development or product improvement. They should be able to perform testing in the lab and in the field using various test equipment, document and organize test data and provide technical support for new products and perform repairs to meet internal and external stakeholders' needs. Instruments are used to safely protect lives and property and reduce emissions associated with natural gas supply chain. *PLEASE NOTE: This is an onsite position located near Hobby Airport in Houston, TX. RESPONSIBILITIES: Perform design verification testing and calibration on instruments and assemblies for new products or to sustain existing products and provide detailed documentation of test procedure and its results. Troubleshoot and repair instruments, assemblies, and subassemblies. Build test jigs and breadboard circuits as needed to help with product development and testing. Construct components and/or subassemblies and assembles electronic equipment. Use & maintain laboratory test equipment such as Oscilloscopes, Logic analyzers and spectrum analyzers. Train customers, distributors, manufacturing and repair technicians. Record, compute and analyze necessary test data and complete necessary documentation. Recommend improvements in product design, quality, procedures, components, and processes. Report improper operations, defective materials and unusual conditions to supervisors. Follow safety rules and regulations and maintains a neat, clean and orderly work area. Perform other duties as requested by supervisor. REQUIREMENTS: Two-year technical degree beyond High School diploma or equivalent is required. Must have formal training in electronics technology. Minimum 5-7 years' experience in the electrical/electronics, mechanical, hydraulic and pneumatic fields with emphasis on electrical/electronics in an R&D or product development. Must be computer literate and well versed with MS Office products. Some ability to use EDA software applications such as Altium, Eagle, Allegro etc PHYSICAL REQUIREMENTS: While performing the duties of this job, the employee is regularly required to stand. The employee is frequently required to use hands to finger, handle, or feel objects, tools, or controls and to climb or balance. The employee is occasionally required to walk; reach with hands and arms; stoop, kneel, crouch or crawl; and talk or hear. The employee must regularly lift and move up to 10 pounds, frequently lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus. Salary Range: $60,000 - $70,000 Schedule: Full-time, Monday through Friday Offers of employment are contingent on passing a pre-employment background check and drug screening Heath Consultants Incorporated is an equal opportunity employer and offers competitive salary

We are looking to hire a smart and dependable Technician in the Electrical Engineering group to assist in testing, repair, troubleshooting, documentation and training manufacturing. Duties/Responsibilities: Display ability to work independently and work in a team environment as well. Ability to take instructions from Engineering and can be an instructor to manufacturing. Document Work Instructions and train Manufacturing to follow test procedures. Test products for Engineering on test racks/ Ovens and create test reports. Assemble Test fixtures. Repair/ Rework occasionally. Physical Requirements: Occasional lifting or assembling of test fixture tray or equipment as necessary. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S. At Geospace our employees enjoy benefits to support their physical, financial, and emotional wellness. These benefits include: • Comprehensive medical, dental and vision plans • 401(k) with a percentage match • Supplemental insurance options • Paid time-off program with paid holidays • Paid volunteer hours, and charitable giving matches Qualifications Associate degree or Bachelor's degree in electrical or electronic field of study. 2 plus years of work experience in an Electronic/Electrical Technician role. Ability to read Electronic/Electrical Schematic and Layout. Display some understanding of low voltage electronic component functionality. Familiar with testing in Oven. Familiar with MS Office to create test reports.

Lays out, rigs up, builds, tests, troubleshoots, repairs and modifies oilfield production electronic components, parts, equipment, and systems, such as computer equipment, data acquisition instrumentation, flow tubes, densitometers, pressure transducers, test equipment, and other various hydraulic fracturing machinery and controls, applying principles and theories of electronics, electrical circuitry, mathematics, electronic and electrical testing. Responsibilities * Essential Duties and Responsibilities include the following (Additional duties may be assigned as necessary): Troubleshoots, repairs and calibrates sensors at an entry to intermediate level, to include but not limited to: pressure, temperature, speed, density, viscosity, pH, level position, float, counting devices, hydraulic control, photo cells, flow rate, differential pressure, pressure switches under the direction and guidance of the Lead Electronics Technician and/or Supervisor. Performs use of Data Van control software to include: installation, configuration, and remote usage, pull and analyze log data files and configuration files from a Data Van or other unit. Assists other electronics personnel on equipment capabilities and usage to include Data Van software. Performs tracking and accountability of repair parts, ready spares and consumables. Communicates equipment status details and directions in a clear and coherent manner. Maintains daily work logs, paperwork requirements, and work orders on a timely and efficient basis. Coordinates with appropriate personnel in regards to completing work requests, troubleshooting and upgrading equipment. Coordinates with other technicians and Lead personnel regarding equipment status, emergency repairs and best practices of equipment usage. Displays knowledge of circuits, systems and components utilized on the fracturing equipment. Analyzes and modifies standard circuitry to improve its performance. Performs maintenance of computer systems including software and hardware updates. Completes preventive maintenance and visual inspections using authorized procedures, preventive maintenance forms, and reporting media. Reads, comprehends, and interprets blueprints/drawings, schematics, and procedures and relates them to the facility/equipment and have the ability to troubleshoot non-standard electronic devices or devices for which documentation is incomplete or not available. Sets up and runs tests with occasional supervisory and/or engineering support. Performs failure analysis and communicates findings effectively using standalone reports and/or other software. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED) and one year certificate from college or technical school; or one to three years related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read, analyze, and interpret documents such as safety guidelines, operational and maintenance instructions, technical procedures, and governmental regulations. Ability to write reports and business correspondence. Ability to speak effectively, present information and respond to questions from supervisors, managers, and clients. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply concepts of basic algebra and geometry. Ability to use mathematical formulas to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Familiar with Microsoft Programs, Database management, basic communications and networking protocols. Web and Cloud services knowledge a plus. Certificates, Licenses, Registrations Valid driver's license with a satisfactory driving record. Other Skills and Abilities Professional, clear verbal and written communication skills. Ability to work flexible schedule, including long and/or irregular hours. Ability to work in remote locations. Ability to read equipment prints and schematics to perform effective troubleshooting. Ability to work autonomously with minimal supervision and meet strict deadlines. Ability to read and write minimal English for safety reasons. Must own a set of basic tools. Bilingual is a plus. Other Qualifications Basic knowledge and at least one year of experience in maintenance and repair of instrumentation including but not limited to: flow meters, transducers, densitometers, PLCs and other measurement controls. Knowledge of a wide variety of electronic test equipment and various mechanical hand tools. Knowledge and ability to solder simple circuits, connectors, and wiring. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and taste or smell. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; fumes or airborne particles and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions and outside weather conditions. The employee is occasionally exposed to high, precarious places; extreme heat; risk of electrical shock; explosives; risk of radiation exposure and vibration. The noise level in the work environment is usually very loud.

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities · Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. · Assemble equipment per engineered drawings or as instructed by others. · Inspect completed components for accuracy and functionality. · Maintain an orderly work area. · Properly maintain company supplied tooling. · Aid in developing of new procedures and improving existing procedures. · Must understand and comply with all safety rules and company policies of Weatherford. · Work assignments carried out to the highest quality level. · Performs any assembly type functions, using hand or power tools. · May operate both stationary and moving overhead cranes. · Operates any equipment needed to perform job. Experience & Education REQUIRED · 1-2 years prior assembly or manufacturing experience · Mechanical aptitude. · Ability to read blueprints and wiring diagrams PREFERRED · Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED · Good verbal communication skills. · Basic computer skills · Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities * Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. * Assemble equipment per engineered drawings or as instructed by others. * Inspect completed components for accuracy and functionality. * Maintain an orderly work area. * Properly maintain company supplied tooling. * Aid in developing of new procedures and improving existing procedures. * Must understand and comply with all safety rules and company policies of Weatherford. * Work assignments carried out to the highest quality level. * Performs any assembly type functions, using hand or power tools. * May operate both stationary and moving overhead cranes. * Operates any equipment needed to perform job. Experience & Education REQUIRED * 1-2 years prior assembly or manufacturing experience * Mechanical aptitude. * Ability to read blueprints and wiring diagrams PREFERRED * Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED * Good verbal communication skills. * Basic computer skills * Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1