Maintenance Welder jobs at Lincoln Tech - 543 jobs

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Project Pipe Welder B** As a Pipe Welder, you will set up, operate and adjust manual and/or automatic machines to perform welding operations in all positions **Additional Information:** + Urgently hiring + Multiple openings + This is a supplemental position located at the Solar Turbines manufacturing facility located in Channelview, TX + No relocation package is available **Job Duties/Responsibilities may include, but are not limited to:** + Perform Manual finish welding operations on carbon and stainless steel in all positions + Follow documented procedures and standard work to perform safe and defect free operations + Perform carbon arc cutting and gouging + Sanding may be required to prepare and dress welds + Use of forklifts, pallet jacks, jib and overhead cranes to move and position work pieces **Required Qualifications:** + Must be able to pass multiple welder qualification tests + Minimum of 6 months of experience in a production environment + Ability to perform simple computer operations + Be available to work 1st or 2nd shift + Ability to work overtime to support production demands, including weekends **Desired Qualifications:** + One (1) to three (3) years of GTAW and FCAW welding experience **Top Candidates:** + Good Communication Skills and strong commitment to safety, quality, and teamwork + Combination Welder and Fitter + Leadership Experience + Ability to work well individually or in a team environment **Candidates may be placed on any shift, dependent on business needs** Summary Pay Range: $25.48 - $38.22 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Competitive salary and annual bonus program + Medical, dental, and vision coverage + Paid time off plan (Vacation, Holiday, Sick, Etc.) + Health savings account (HSA) + Flexible spending accounts (FSAs) + Life Insurance + Employee Assistance Programs + Voluntary Benefits (Ex. Accident, Identity Theft Protection) + There will be cross-training and qualifications-based opportunities to earn up to an additional $2 per hour, with any night shift activity qualifying for another $3 per hour. + Potential base salary increases from annual performance reviews _All eligible candidates MUST pass the following pre-employment screenings before they can be hired_ _to_ _any position:_ + Background Screening + Physical and drug/alcohol screening Solar is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. As a global company, Solar offers many job opportunities outside of the U.S. which can be found through our employment website at ********************************************************** Please ensure you frequently check the email account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. EEO/AA Employer. All qualified individuals - Including minorities, females, veterans and individuals with disabilities - are encouraged to apply. **Posting Dates:** Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Project Pipe Welder B As a Pipe Welder, you will set up, operate and adjust manual and/or automatic machines to perform welding operations in all positions Additional Information: * Urgently hiring * Multiple openings * This is a supplemental position located at the Solar Turbines manufacturing facility located in Channelview, TX * No relocation package is available Job Duties/Responsibilities may include, but are not limited to: * Perform Manual finish welding operations on carbon and stainless steel in all positions * Follow documented procedures and standard work to perform safe and defect free operations * Perform carbon arc cutting and gouging * Sanding may be required to prepare and dress welds * Use of forklifts, pallet jacks, jib and overhead cranes to move and position work pieces Required Qualifications: * Must be able to pass multiple welder qualification tests * Minimum of 6 months of experience in a production environment * Ability to perform simple computer operations * Be available to work 1st or 2nd shift * Ability to work overtime to support production demands, including weekends Desired Qualifications: * One (1) to three (3) years of GTAW and FCAW welding experience Top Candidates: * Good Communication Skills and strong commitment to safety, quality, and teamwork * Combination Welder and Fitter * Leadership Experience * Ability to work well individually or in a team environment Candidates may be placed on any shift, dependent on business needs Summary Pay Range: $25.48 - $38.22 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Competitive salary and annual bonus program * Medical, dental, and vision coverage * Paid time off plan (Vacation, Holiday, Sick, Etc.) * Health savings account (HSA) * Flexible spending accounts (FSAs) * Life Insurance * Employee Assistance Programs * Voluntary Benefits (Ex. Accident, Identity Theft Protection) * There will be cross-training and qualifications-based opportunities to earn up to an additional $2 per hour, with any night shift activity qualifying for another $3 per hour. * Potential base salary increases from annual performance reviews All eligible candidates MUST pass the following pre-employment screenings before they can be hired to any position: * Background Screening * Physical and drug/alcohol screening Solar is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. As a global company, Solar offers many job opportunities outside of the U.S. which can be found through our employment website at ********************************************************* Please ensure you frequently check the email account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. EEO/AA Employer. All qualified individuals - Including minorities, females, veterans and individuals with disabilities - are encouraged to apply. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Project Pipe Welder B As a Pipe Welder, you will set up, operate and adjust manual and/or automatic machines to perform welding operations in all positions Additional Information: Urgently hiring Multiple openings This is a supplemental position located at the Solar Turbines manufacturing facility located in Channelview, TX No relocation package is available Job Duties/Responsibilities may include, but are not limited to: Perform Manual finish welding operations on carbon and stainless steel in all positions Follow documented procedures and standard work to perform safe and defect free operations Perform carbon arc cutting and gouging Sanding may be to prepare and dress welds Use of forklifts, pallet jacks, jib and overhead cranes to move and position work pieces Required Qualifications: Must be able to pass multiple welder qualification tests Minimum of 6 months of experience in a production environment Ability to perform simple computer operations Be available to work 1st or 2nd shift Ability to work overtime to support production demands, including weekends Desired Qualifications: One (1) to three (3) years of GTAW and FCAW welding experience Top Candidates: Good Communication Skills and strong commitment to safety, quality, and teamwork Combination Welder and Fitter Leadership Experience Ability to work well individually or in a team environment **Candidates may be placed on any shift, dependent on business needs** Summary Pay Range: $25.48 - $38.22 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Competitive salary and annual bonus program Medical, dental, and vision coverage Paid time off plan (Vacation, Holiday, Sick, Etc.) Health savings account (HSA) Flexible spending accounts (FSAs) Life Insurance Employee Assistance Programs Voluntary Benefits (Ex. Accident, Identity Theft Protection) There will be cross-training and qualifications-based opportunities to earn up to an additional $2 per hour, with any night shift activity qualifying for another $3 per hour. Potential base salary increases from annual performance reviews All eligible candidates MUST pass the following pre-employment screenings before they can be hired to any position: Background Screening Physical and drug/alcohol screening Solar is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. As a global company, Solar offers many job opportunities outside of the U.S. which can be found through our employment website at ********************************************************* Please ensure you frequently check the email account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. EEO/AA Employer. All qualified individuals - Including minorities, females, veterans and individuals with disabilities - are encouraged to apply. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Do you get satisfaction from helping people make their dreams come true? If this sounds like you, the Welding Instructor position at Tulsa Welding School is the job you have been looking for! You would join a team committed to making our student's experience as impactful as possible and spread a little excitement along the way. We are looking for an individual with a positive attitude and great work ethic. You will have to work hard, but you will reap the rewards of truly changing lives. The Welding Instructor administers lessons according to a pre-developed lesson plan, and then Leads students through practical application of those lessons. Responsibilities: * Maintain accurate record keeping as it applies to student attendance and grades. * Create and maintain a safe environment at all times. * Manage tools assigned to the classroom and issue, inspect, repair, and teach proper handling of tools. * Maintain control of student activities and ensure compliance of school policies and rules. * Ensure an ethical and fair testing environment during periods of testing. * Maintain classroom equipment through evaluation, inspection, parts ordering, and repair. * Constantly evaluate curriculum to ensure relevance and maintain a working field knowledge through continuing education. * Conform to prescribed methods of record keeping as directed by supervisory staff. * Communicate promptly regarding supplies, tools or other essentials for students in the classroom. * Demonstrate continuing professional development of technical expertise and as an instructor. * Perform other duties as assigned Knowledge, Education & Experience: * Minimum of five years of welding field experience * Demonstrated leadership skills; ability to work individually and within a group * Strong organizational skills and attention to detail * Excellent written and communication skills * Established customer service background * Computer proficiency using Microsoft Office Products (Word, Excel, and Outlook) required * Candidates must be able to successfully pass a criminal history check and drug test. Why should you apply? * Competitive benefits package including Medical, Dental, and Vision (with Company paid employee only dental & vision option) plus access to virtual doctor's visits * Flexible Spending Account and Health Savings Account options * 401(k) Employer Match * Short- & Long-Term Disability - Company Paid * Basic Life Insurance - Company Paid * 11 Paid Holidays * Your Birthday off - Company Paid * 2 weeks PTO - 1st yr. * Tuition Reimbursement * Employee referral bonus program * Headspace membership - Company Paid * Marquee Health Well-Being Program - Company Paid * Pet Insurance, Accident Insurance, and other optional insurance plans StrataTech Education - Core Values At StrataTech, we are zealous advocates of positive and sustainable life change through skilled trades education. We are laser focused on student success by focusing on organizational and operational improvements, a dedication to excellence in training programs, innovation and technology aligning industry transformations, and a culture built on human compassion, care, and service. Together, we are on fire to inspire and collectively strive to make a true impact in the lives of others. Collectively, our organizational core values are focused on promoting an incredible work environment, with genuine and authentic people, which is both challenging and fun, while focused on serving the needs of others. Together, we are united with the desire to make a positive impact in the lives we touch and in the communities we serve. * Challenging and Fun * Creating an Incredible Work Environment * Genuine People * Force For Good We are laser focused on student success by focusing on organizational and operational improvements, a dedication to excellence in training programs, innovation and technology aligning industry transformations, and a culture built on human compassion, care, and service. Together, we are on fire to inspire and collectively strive to make a true impact in the lives of others. StrataTech Education Group StrataTech Education Group focuses on the acquisition, growth and development of specialized career education schools, particularly skilled-trade programs designed to address the nation's growing infrastructure needs. The company's Tulsa Welding School subsidiary was founded in 1949 with campuses in Tulsa, Okla., Jacksonville, Fla., and Houston, Texas. Tulsa Welding School is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) and is a member of the American Welding Society and the Career Education Colleges and Universities. TWS-Jacksonville is a branch campus of Tulsa Welding School, located at 2545 E. 11th St., Tulsa, OK 74104. Licensed by OBPVS and ASBPCE. Licensed by the Florida Commission for Independent Education, License No. 2331. Tulsa Welding School & Technology Center (TWSTC), a branch campus of Tulsa Welding School, opened and started training students in 2014. TWSTC is located at 243A Greens Road in Houston, Texas. The Refrigeration School, Inc (RSI) was founded in Phoenix, Arizona in 1965. RSI trains students in the technical services that are needed today and challenges the student to reach their highest level of academic knowledge and leadership capabilities. Accredited School, ACCSC. Licensed by the Arizona State Board for Private Post Secondary Education. Candidates must be able to successfully pass a criminal history check and drug test. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. In compliance with federal law, StrataTech Education Group prepares annual reports on campus security and resources. StrataTech Education Group's Annual Security Reports are available online at the link(s) below. Additionally, you may request a hard copy of the report by contacting the designate Clery Officer at **************. Tulsa Welding School 2024 Annual Security Report Tulsa Welding School Jacksonville 2024 Annual Security Report Tulsa Welding School & Technology Center 2024 Annual Security Report Tulsa Welding School Dallas 2024 Annual Security Report The Refrigeration School 2024 Annual Security Report StrataTech Global Privacy Policy Interested? Apply now!

AAS/AOS Welding Instructors Urgently Needed Dallas, Texas Campus We're gearing up for the launch of our AAS and AOS Welding Associate Degree Program-and we need outstanding welding faculty to make it happen! Job Description: * You will maintain accurate record keeping, as it applies to student attendance and their grades, and you will advise students on their attendance, grades, and discipline issues, as necessary. * Our instructors are expected to create and maintain a safe environment at all times. * It will be your responsibility to manage all tools assigned to the classroom. You will issue, inspect, repair, and teach proper handling of those tools. * As a highly visible representative of the school, you will communicate, support, and enforce school policies and procedures at all times, and advise students accordingly. * During periods of testing, you will ensure an ethical and fair testing environment. * Instructors are responsible for maintaining classroom equipment through evaluation, inspection, parts ordering, and repair. * You will use your experience to constantly evaluate the curriculum to ensure continuing relevant. * You will conform to prescribed methods of record keeping, as directed by supervisory staff. * It is important to communicate promptly regarding supplies, tools, or other essentials needed for students in the classroom. * You are expected to maintain a working field knowledge through continuing education and demonstrate continuing professional development of your technical expertise, and as an instructor. * One of the most rewarding parts of this job is attending our semi-annual graduation ceremonies; attendance is mandatory for our instructors. Benefits: Why should you apply? * Competitive benefits package including Medical, Dental, and Vision (with Company paid employee only dental & vision option) plus access to virtual doctor's visits. * Flexible Spending Account and Health Savings Account options. * 401(k) Employer Match. * Short- & Long-Term Disability - Company Paid. * Basic Life Insurance - Company Paid. * 12 Paid Holidays * Your Birthday off - Company Paid * 2 weeks PTO - 1st yr. * Tuition Reimbursement * Employee referral bonus program * Headspace membership - Company Paid * Marquee Health Well-Being Program - Company Paid * Pet Insurance, Accident Insurance, and other optional insurance plans StrataTech Education Group StrataTech Education Group focuses on the acquisition, growth and development of specialized career education schools, particularly skilled-trade programs designed to address the nation's growing infrastructure needs. The company's Tulsa Welding School subsidiary was founded in 1949 with campuses in Tulsa, Okla., Jacksonville, Fla., and Houston, Texas. Tulsa Welding School is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) and is a member of the American Welding Society and the Career Education Colleges and Universities. TWS-Jacksonville is a branch campus of Tulsa Welding School, located at 2545 E. 11th St., Tulsa, OK 74104. Licensed by OBPVS and ASBPCE. Licensed by the Florida Commission for Independent Education, License No. 2331. Tulsa Welding School & Technology Center (TWSTC), a branch campus of Tulsa Welding School, opened and started training students in 2014. TWSTC is located at 243A Greens Road in Houston, Texas. The Refrigeration School, Inc (RSI) was founded in Phoenix, Arizona in 1965. RSI trains students in the technical services that are needed today and challenges the student to reach their highest level of academic knowledge and leadership capabilities. Accredited School, ACCSC. Licensed by the Arizona State Board for Private Post Secondary Education. Candidates must be able to successfully pass a criminal history check and drug test. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. In compliance with federal law, StrataTech Education Group prepares annual reports on campus security and resources. You may request a hard copy of the report by contacting the designate Clery Officer at **************. Job Requirements Who We're Looking For: Upper-Level Welding Instructors An associate degree is required. A bachelor's degree or higher is preferred, 4-5 years recent industry experience (NDT, QA, fabrication) Required: AWS CWI (Certified Welding Inspector)-can have CAWI as long as they are achieving CWI within established timeframe (1 yr) . Preferred: AWS SCWI (Senior Certified Welding Inspector) ASNT Level III in applicable NDT methods (UT, MT, RT, PT, ET) OSHA 30, Radiation Safety, or equivalent regulatory training

AOS Welding Instructors Urgently Needed Jacksonville Campus We're gearing up for the launch of our AOS Welding Associate Degree Program-and we need outstanding welding faculty to make it happen! Job Description: * You will maintain accurate record keeping, as it applies to student attendance and their grades, and you will advise students on their attendance, grades, and discipline issues, as necessary. * Our instructors are expected to create and maintain a safe environment at all times. * It will be your responsibility to manage all tools assigned to the classroom. You will issue, inspect, repair, and teach proper handling of those tools. * As a highly visible representative of the school, you will communicate, support, and enforce school policies and procedures at all times, and advise students accordingly. * During periods of testing, you will ensure an ethical and fair testing environment. * Instructors are responsible for maintaining classroom equipment through evaluation, inspection, parts ordering, and repair. * You will use your experience to constantly evaluate the curriculum to ensure continuing relevant. * You will conform to prescribed methods of record keeping, as directed by supervisory staff. * It is important to communicate promptly regarding supplies, tools, or other essentials needed for students in the classroom. * You are expected to maintain a working field knowledge through continuing education and demonstrate continuing professional development of your technical expertise, and as an instructor. * One of the most rewarding parts of this job is attending our semi-annual graduation ceremonies; attendance is mandatory for our instructors. Benefits: Why should you apply? * Competitive benefits package including Medical, Dental, and Vision (with Company paid employee only dental & vision option) plus access to virtual doctor's visits. * Flexible Spending Account and Health Savings Account options. * 401(k) Employer Match. * Short- & Long-Term Disability - Company Paid. * Basic Life Insurance - Company Paid. * 12 Paid Holidays * Your Birthday off - Company Paid * 2 weeks PTO - 1st yr. * Tuition Reimbursement * Employee referral bonus program * Headspace membership - Company Paid * Marquee Health Well-Being Program - Company Paid * Pet Insurance, Accident Insurance, and other optional insurance plans StrataTech Education Group StrataTech Education Group focuses on the acquisition, growth and development of specialized career education schools, particularly skilled-trade programs designed to address the nation's growing infrastructure needs. The company's Tulsa Welding School subsidiary was founded in 1949 with campuses in Tulsa, Okla., Jacksonville, Fla., and Houston, Texas. Tulsa Welding School is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) and is a member of the American Welding Society and the Career Education Colleges and Universities. TWS-Jacksonville is a branch campus of Tulsa Welding School, located at 2545 E. 11th St., Tulsa, OK 74104. Licensed by OBPVS and ASBPCE. Licensed by the Florida Commission for Independent Education, License No. 2331. Tulsa Welding School & Technology Center (TWSTC), a branch campus of Tulsa Welding School, opened and started training students in 2014. TWSTC is located at 243A Greens Road in Houston, Texas. The Refrigeration School, Inc (RSI) was founded in Phoenix, Arizona in 1965. RSI trains students in the technical services that are needed today and challenges the student to reach their highest level of academic knowledge and leadership capabilities. Accredited School, ACCSC. Licensed by the Arizona State Board for Private Post Secondary Education. Candidates must be able to successfully pass a criminal history check and drug test. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. In compliance with federal law, StrataTech Education Group prepares annual reports on campus security and resources. You may request a hard copy of the report by contacting the designate Clery Officer at **************. Job Requirements Who We're Looking For: Upper-Level Welding Instructors An associate degree is required. A bachelor's degree or higher is preferred, 4-5 years recent industry experience (NDT, QA, fabrication) Required: AWS CWI (Certified Welding Inspector)-can have CAWI as long as they are achieving CWI within established timeframe (1 yr) . Preferred: AWS SCWI (Senior Certified Welding Inspector) ASNT Level III in applicable NDT methods (UT, MT, RT, PT, ET) OSHA 30, Radiation Safety, or equivalent regulatory training

Instructor- Skilled Trades StrataTech Education Group | Tulsa Welding School | The Refrigeration School is hiring full-time, onsite Instructors for days, evenings and weekends! Help shape the future of trades. As an Instructor, you will lead hands-on training, mentor students, and support classroom safety, tool management, and curriculum delivery. Key Duties include: * Teaching from pre-developed lesson plans * Engaging students while adapting to different learning styles * Tracking attendance and grades * Maintaining classroom cleanliness and safety * Managing tools and equipment * Supporting new instructor onboarding * Assisting with curriculum updates and testing * Providing short-term tutoring and mentoring Requirements include: * High School diploma or GED. (Jacksonville only- 18 SCH of post-higher education) * 3-5 years of hands on experience in the last 10 years of field taught * Strong communication and organizational skills * Ability to lift 50 pounds * Work in shop or lab environments Perks and Benefits include: * Medical, dental and vision insurance * 401(k) with company match * Life and disability insurance * Pad holidays, PTO, and birthday off * tuition reimbursement * Access to wellness programs Our core values are an incredible work environment, genuine people, challenging and fun culture, and being a force for good. Apply now and help the next generation master the trades. #ZR

Instructor- Skilled Trades StrataTech Education Group | Tulsa Welding School | The Refrigeration School is hiring full-time, onsite Instructors for days, evenings and weekends! Help shape the future of trades. As an Instructor, you will lead hands-on training, mentor students, and support classroom safety, tool management, and curriculum delivery. Key Duties include: Teaching from pre-developed lesson plans Engaging students while adapting to different learning styles Tracking attendance and grades Maintaining classroom cleanliness and safety Managing tools and equipment Supporting new instructor onboarding Assisting with curriculum updates and testing Providing short-term tutoring and mentoring Requirements include: High School diploma or GED. (Jacksonville only- 18 SCH of post-higher education) 3-5 years of hands on experience in the last 10 years of field taught Strong communication and organizational skills Ability to lift 50 pounds Work in shop or lab environments Perks and Benefits include: Medical, dental and vision insurance 401(k) with company match Life and disability insurance Pad holidays, PTO, and birthday off tuition reimbursement Access to wellness programs Our core values are an incredible work environment, genuine people, challenging and fun culture, and being a force for good. Apply now and help the next generation master the trades. #ZR

You will maintain accurate record keeping, as it applies to student attendance and their grades, and you will advise students on their attendance, grades, and discipline issues, as necessary. Our instructors are expected to create and maintain a safe environment at all times. It will be your responsibility to manage all tools assigned to the classroom. You will issue, inspect, repair, and teach proper handling of those tools. As a highly visible representative of the school, you will communicate, support, and enforce school policies and procedures at all times, and advise students accordingly. During periods of testing, you will ensure an ethical and fair testing environment. Instructors are responsible for maintaining classroom equipment through evaluation, inspection, parts ordering, and repair. You will use your experience to constantly evaluate the curriculum to ensure continuing relevant. You will conform to prescribed methods of record keeping, as directed by supervisory staff. It is important to communicate promptly regarding supplies, tools, or other essentials needed for students in the classroom. You are expected to maintain a working field knowledge through continuing education and demonstrate continuing professional development of your technical expertise, and as an instructor. One of the most rewarding parts of this job is attending our semi-annual graduation ceremonies; attendance is mandatory for our instructors. Benefits: Why should you apply? Competitive benefits package including Medical, Dental, and Vision (with Company paid employee only dental & vision option) plus access to virtual doctor's visits. Flexible Spending Account and Health Savings Account options. 401(k) Employer Match. Short- & Long-Term Disability - Company Paid. Basic Life Insurance - Company Paid. 12 Paid Holidays Your Birthday off - Company Paid 2 weeks PTO - 1st yr. Tuition Reimbursement Employee referral bonus program Headspace membership - Company Paid Marquee Health Well-Being Program - Company Paid Pet Insurance, Accident Insurance, and other optional insurance plans StrataTech Education Group StrataTech Education Group focuses on the acquisition, growth and development of specialized career education schools, particularly skilled-trade programs designed to address the nation's growing infrastructure needs. The company's Tulsa Welding School subsidiary was founded in 1949 with campuses in Tulsa, Okla., Jacksonville, Fla., and Houston, Texas. Tulsa Welding School is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) and is a member of the American Welding Society and the Career Education Colleges and Universities. TWS-Jacksonville is a branch campus of Tulsa Welding School, located at 2545 E. 11th St., Tulsa, OK 74104. Licensed by OBPVS and ASBPCE. Licensed by the Florida Commission for Independent Education, License No. 2331. Tulsa Welding School & Technology Center (TWSTC), a branch campus of Tulsa Welding School, opened and started training students in 2014. TWSTC is located at 243A Greens Road in Houston, Texas. The Refrigeration School, Inc (RSI) was founded in Phoenix, Arizona in 1965. RSI trains students in the technical services that are needed today and challenges the student to reach their highest level of academic knowledge and leadership capabilities. Accredited School, ACCSC. Licensed by the Arizona State Board for Private Post Secondary Education. **Candidates must be able to successfully pass a criminal history check and drug test. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. In compliance with federal law, StrataTech Education Group prepares annual reports on campus security and resources. You may request a hard copy of the report by contacting the designate Clery Officer at **************. Job Requirements Who We're Looking For: Upper-Level Welding Instructors An associate degree is required. A bachelor's degree or higher is preferred, 4-5 years recent industry experience (NDT, QA, fabrication) Required: AWS CWI (Certified Welding Inspector)-can have CAWI as long as they are achieving CWI within established timeframe (1 yr) . Preferred: AWS SCWI (Senior Certified Welding Inspector) ASNT Level III in applicable NDT methods (UT, MT, RT, PT, ET) OSHA 30, Radiation Safety, or equivalent regulatory training

Welding Instructor, Part Time Faculty JobID: 664 Part-time Faculty/Counselor/Part-time Faculty Date Available: Jan. 2026 Additional Information: Show/Hide Description: Welding Instructor, Part-Time Faculty The Division of Workforce Development is seeking Welding Instructor candidates to fill an immediate teaching need for the Spring 2026 Semester starting in January 2026. Welding courses meet face to face at the main campus located in Oglesby. Qualifications: Associate's degree in industrial technology/manufacturing/welding with coursework in welding and/or manufacturing from an accredited college/university or an equivalent stndarized certification in welding required; 2,000 plus hours of proven work experience required; must possess a demonstrated knowledge and competence of Stick, MIG, TIG, OAW and OFC. Knowledge of advanced welding materials and practices preferred. Prefer Certified Welding Inspector credentials (CWI). Teaching experience at the college level in welding and/or manufacturing preferred. Demonstrated commitment to the mission of the comprehensive community college. Salary: $688.00 per credit hour; personal paid leave and other part-time benefits Working Conditions: Duties are performed in the usual classroom and lab environment Application Procedure: Complete online application by clicking on the "Apply" link shown above and include a cover letter specifically addressing how your qualifications meet the duties and responsibilities outlined in the job description, resume, and applicable (unofficial) transcripts. Applications are only accepted through the online process. Apply immediately for full consideration. Open until position is filled. Official transcripts required upon hire; employment is contingent upon criminal background check; employment sponsorship is not available. AA/EOE

Instructor- Skilled Trades StrataTech Education Group | Tulsa Welding School | The Refrigeration School is hiring full-time, onsite Instructors for days, evenings and weekends! Help shape the future of trades. As an Instructor, you will lead hands-on training, mentor students, and support classroom safety, tool management, and curriculum delivery. Key Duties include: Teaching from pre-developed lesson plans Engaging students while adapting to different learning styles Tracking attendance and grades Maintaining classroom cleanliness and safety Managing tools and equipment Supporting new instructor onboarding Assisting with curriculum updates and testing Providing short-term tutoring and mentoring Requirements include: High School diploma or GED. (Jacksonville only- 18 SCH of post-higher education) 3-5 years of hands on experience in the last 10 years of field taught Strong communication and organizational skills Ability to lift 50 pounds Work in shop or lab environments Perks and Benefits include: Medical, dental and vision insurance 401(k) with company match Life and disability insurance Pad holidays, PTO, and birthday off tuition reimbursement Access to wellness programs Our core values are an incredible work environment, genuine people, challenging and fun culture, and being a force for good. Apply now and help the next generation master the trades.

Part-time Faculty/Counselor/Part-time Faculty Date Available: Jan. 2026 Closing Date: Open until filled Description: Welding Instructor, Part-Time Faculty Position Summary: The Division of Workforce Development is seeking Welding Instructor candidates to fill an immediate teaching need for the Spring 2026 Semester starting in January 2026. Welding courses meet face to face at the main campus located in Oglesby. Qualifications: Associate's degree in industrial technology/manufacturing/welding with coursework in welding and/or manufacturing from an accredited college/university or an equivalent stndarized certification in welding required; 2,000 plus hours of proven work experience required; must possess a demonstrated knowledge and competence of Stick, MIG, TIG, OAW and OFC. Knowledge of advanced welding materials and practices preferred. Prefer Certified Welding Inspector credentials (CWI). Teaching experience at the college level in welding and/or manufacturing preferred. Demonstrated commitment to the mission of the comprehensive community college. Salary: $688.00 per credit hour; personal paid leave and other part-time benefits Working Conditions: Duties are performed in the usual classroom and lab environment Application Procedure: Complete online application by clicking on the “Apply” link shown above and include a cover letter specifically addressing how your qualifications meet the duties and responsibilities outlined in the job description, resume, and applicable (unofficial) transcripts. Applications are only accepted through the online process. Apply immediately for full consideration. Open until position is filled. Official transcripts required upon hire; employment is contingent upon criminal background check; employment sponsorship is not available. AA/EOE

Adjunct faculty are hired in a part-time capacity on an as needed basis. These positions are filled prior to or during the start of each semester and are contingent upon the needs of the College. Adjunct faculty must complete the Lee Teaching Online Certification course or provide documentation of training in distance education. Lee College accepts application materials for adjunct employment on a continuing basis throughout the year from qualified applicants willing to teach on a part-time basis. Academic departments will contact potential applicants when there are available openings. * Teach freshman and sophomore-level Welding courses. * Qualified applicants must be committed to student learning, integrating technology into the curriculum, and encouraging engaged scholars. * Maintain accurate student accounting records in compliance with Lee College requirements. * Submit required student reports to the Admissions & Records Office according to schedule. * Direct and evaluate the learning experience of the students in accordance with adopted curricula and approved procedures. * Teach assigned classes in keeping with approved syllabi, outlines, and instructional materials. * Provide counsel/guidance to students when there is a need. * Faculty members may be required to teach evening, summer, online, hybrid, dual enrollment, and/or weekend classes. * Provide at least one scheduled office hour per week for each three-credit course in a regular 16-week semester or two scheduled office hours per week in an 8-week term. Office hours can be in-person, by telephone, or via Blackboard Collaborate. You must be available for a live conversation during scheduled office hours. Perform other duties as assigned. Qualified candidates will have ten (10) years of work experience in a qualifying field (must be able to obtain an Associate's degree in two (2) years with no class overloads until completion of degree) OR no degree with twenty (20) years work experience in a qualifying field Preferred: * Associate's, Bachelor's, or Master's degree with five (5) years of related experience in a qualifying field (i.e., Welding or Welding Inspector) * Prior online teaching experience and certification * Blackboard Learning Management System experience

We are currently seeking an Adjunct Welding Instructor who will advance the institution's proud tradition of excellence in academics, student life and community service. The Opportunity We're looking for a professional like you to teach our students about the exciting world of welding. Your professional experience makes you the ideal instructor because you can impart both on-the-job know-how and industry knowledge and expertise. When you're not teaching, you might be assisting students with opportunities for work (co-ops, part-time, work-study) and careers; evaluating program curricula and/or practices; advising declared majors; or reviewing textbooks and learning materials. If you're excited about passing the torch of your expertise and skills to the next generation of welders, your next step should be to submit your application today! If this sounds like the role for you and you're ready to join an amazing team, please apply right away. SUMMARY Provide the expertise and knowledge that support the college curriculum and programs. Establish courses following accepted higher education standards, teach students using a variety of effective methodologies and provide engagement and support activities that encourage student learning. The role of the Instructional Faculty encompasses teaching and learning, academic advising, professional development and institutional and community service. The incumbent will teach a maximum load of (See Faculty Workload Guidelines) contact hours each semester in area(s) of competency and participate as a full-time instructor in the activities of the department, division and college. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. 1. Teaching: a. Demonstrate skill and/or knowledge in teaching discipline; b. Make continuous efforts to improve the quality of instruction by reviewing and utilizing innovative methodologies, techniques, and delivery methods; c. Develop and use a syllabus for each course or laboratory within college, discipline, and departmental guidelines and submit one copy to the department chair; d. Plan, develop, and use a variety of teaching methods and materials that assist students in meeting course objectives and which are appropriate for students with differing educational and experiential backgrounds and learning styles; e. Evaluate students to measure their progress toward achievement of stated course objectives and inform them of their progress in the course in a timely manner; f. Keep accurate student records and submit related reports and forms within requested timelines; g. Review, evaluate, and recommend student textbooks and learning materials; h. Teach courses at a variety of times and locations in response to institutional needs; i. Use equipment and facilities responsibly and courteously. Where appropriate, assist the chair with the routine maintenance of instructional laboratories and j. Demonstrate competence and interest in the use of technology in the classroom and willingness to explore new instructional methodologies. 2. Academic Advising: a. Maintain professional relationships with students, colleagues, and the community; b. Provide access to students through posted office hours, electronic communication, and other appropriate methods. Provide advice and assistance to students regarding instructional or program-specific issues; c. Make presentations on a particular academic field or program - its subject matter, objectives, opportunities for further study (transfer opportunities), and opportunities for work (co-ops, part-time, work-study) and careers, special clubs and activities available, support services, scholarships, etc.; d. Create and maintain a website dedicated to the types of information specified in bullet three and e. Work with Chair to take on appropriate academic advising activities as needed by the College and Department. (For examples, please refer to the HCC Faculty Workload Guidelines). 3. Professional Development: a. Establish annual objectives for professional growth in consultation with the department chair; b. Keep pace with developments in the discipline; c. Learn and apply technologies that support student learning and d. Participate in the evaluation process for self, department, and college. 4. Institutional and Community Service: a. Works collaboratively with HCC engineering technology programs; b. Assist in bringing ABET accreditation to HCC and to help insure quality in course offerings consistent with ABET standards; c. Work collaboratively with the West Houston Center Director in the coordination of conferences, meetings, workshops, and outreach activities in science, technology, engineering, and mathematics; d. Participate in scheduled institutional service activities including opening week events, conference days, and commencement exercises; e. Participate in discipline committee or program meetings and activities; f. Actively participate in department, college or system meetings and/ or committees; g. Be familiar with and adhere to all policies and procedures of HCCS; h. Participate in college-related activities such as student activities, selection of faculty, community education, recruitment of students, and/or special programs; i. Participate in business and/or student activities and/or community activities that foster goodwill and promote the mission of HCCS; j. Participate in activities required to maintain program and college accreditation standards; k. Participate in the HCCS planning process by assisting in the formulation of departmental objectives and goals and in establishing budget priorities; l. Review, evaluate, and revise program curricula and practices to assure compliance with professional standards, state-mandated guidelines and requirements of business/ industry, and higher education and m. Assist in the articulation of courses and programs with secondary and post-secondary institutions. QUALIFICATIONS To perform this job successfully, an individual must be able to perform the essential duties and responsibilities listed above. The qualifications listed below are representative of the education, experience, knowledge, skills, and/or abilities required. EDUCATION Associate's degree or higher required; official transcript(s) conferring degree must accompany the application). Five (5) years directly related experience in welding may be substituted in lieu of degree. Bachelor's degree preferred. EXPERIENCE Three (3) years of direct work experience in the field, preferably within the last ten (10) years. KNOWLEDGE, SKILLS AND ABILITIES Ability to repair, maintain and operate all machines and tools; Ability to climb a ladder to retrieve and replace materials and supplies; Ability to lift up to 50 pounds; Possess the ability to work in a diverse work environment; Willing and able to teach day or evening classes at a number of sites around the city; Knowledge and skill in a variety of computer usage and software are required; Excellent interpersonal skills and the ability to communicate effectively with a diverse professional, community, and student population; Possess good organizational and planning skills; Demonstrate sensitivity to students with diverse academic, socio-economic, cultural and ethnic backgrounds and students with disabilities; Demonstrated ability to inspire and motivate students in a learning-centered environment; and * Self-disciplined and able to effectively manage others. This in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. This job description may be revised upon development of other duties and changes in responsibilities. The Organization Houston Community College (HCC) is composed of 14 Centers of Excellence and numerous satellite centers that serve the diverse communities in the Greater Houston area by preparing individuals to live and work in an increasingly international and technological society. HCC is one of the country's largest singly-accredited, open-admission, community colleges offering associate degrees, certificates, workforce training, and lifelong learning opportunities. The Team Play a central role at HCC as you keep our everyday operations running like clockwork. You'll get the chance to make things happen and work closely with inspiring leaders across different parts of the institution. Whether your role is supportive, administrative, financial or something else, you'll be part of a dynamic team that not only provides HCC students with cutting-edge academic and career tools, it also takes care of its people. Location Houston is a city with limitless possibilities: * Fourth-largest city in the U.S. and home to 54 Fortune 500 companies, second only to New York City's 55. * Approximately 145 languages are spoken here. * Overall after-taxes living costs are 5.6 percent below the average for all 308 urban areas recently surveyed. * Houston is a major-league sports town, and don't forget the annual Houston Livestock Show & Rodeo. * The weather is great! Mild winters ensure that outdoor activities can be enjoyed year-round. * World-renowned medical care. The Houston metro area has long been known for its first-rate healthcare system, with many Houston area hospitals consistently ranking among the nation's top institutions. * With over 150 museums and cultural institutions in the Greater Houston area, museums are a large part of Houston's cultural scene. * Houston is the Culture & Culinary Capital of Texas with more than 7,500 restaurants and eating establishments covering 60+ cuisines. If this sounds like the role for you and you're ready to join an amazing team, please apply right away. EEO Statement Houston Community College does not discriminate on the bases of race, color, religion, sex, gender identity and expression, national origin, age, disability, sexual orientation or veteran's status. The following person has been designated to handle inquiries regarding the non-discrimination policies: Osvaldo Gomez, Director EEO/Compliance, Title IX Coordinator Office of Equal Opportunity and Title IX PO Box 667517 Houston TX, 77266 ************ or ******************* HCC values its employees and their contributions, promotes opportunities for their professional growth and development, and provides a positive working and learning environment that encourages involvement, innovation, and creativity. Individuals with disabilities, who require special accommodations to interview, should contact **************.

Who We Are With three campuses along Colorado's Front Range, FRCC is the state's largest community college. We enroll close to 28,000 students annually from our diverse service area, which offers a variety of cultural and recreational activities. Each year approximately 5,000 FRCC students transfer to four-year universities and FRCC offers more than 36 career training programs that prepare students for immediate employment and rewarding careers. Last year, more than 5,000 high school students took concurrent enrollment classes with us, earning college credit without having to pay college tuition. And we were recently ranked as one of the "Top Online Colleges" in the country by Newsweek. One of FRCC's main goals is to offer educational excellence for everyone. The college's strong commitment to student success means we start by creating an inclusive and equitable environment-one where both students and employees feel they belong and are supported. FRCC's focus on diversity, equity and inclusion is woven into the fabric of our college conversations and decision-making processes. We are actively seeking to hire a workforce that reflects the diversity of our student body. The college is also an emerging Hispanic Serving Institution. For us, becoming an HSI is an intentional commitment to being a college where our Latinx (and other historically marginalized) students thrive. FRCC employees and leaders work hard to create a culture of collaboration, innovation and pride. We're looking to hire people who share these values-along with our commitment to student success, equity and excellence. Who You Are As a part-time instructor in the Welding Department, you will provide instruction in all levels of welding, including certificate and/or transfer levels. You will work individually, as well as in collaboration with colleagues, to develop an innovative curriculum which meets the needs of our diverse population of students. Student retention and success are your top priority. You will utilize technology and effective teaching strategies to develop students' critical thinking skills. You may be asked to teach at different times, locations and modalities to meet the needs of the College. This position does have the opportunity to work remotely occasionally but does require a strong on-campus presence and may require occasional travel to all three FRCC campuses. Please note: You need to be a Colorado resident on your first day of employment. Also, Front Range Community College is an E-Verify employer. SALARY:The pay range for Part-Time Instructors varies, depending on the type of course, the contact ratio and contact hours. Please refer to our Part-Time Instructor Pay Matrixfor detailed information. BENEFITS:Part-Time Instructors will have their hours measured on an annual basis to determine eligibility to enroll in medical health insurance only for the following benefit period. (See:Instructor & Variable Hour Employee Benefit Information). SELECTION PROCESS: This is an open talent pool. Applicants will be contacted based on the needs of the College. The selection process for this position will be conducted through a competitive, merit-based evaluation of all qualified applicants. Consideration will be made on the basis of a completed application package submitted by the candidate. Completed application package includes: * A resume; * A letter of interest; * A copy of official transcripts; * A one-page statement of your teaching philosophy; and * A list of courses and the semesters you have taught. Qualifications Required Education/Training & Work Experience: * A relevant current industry license or certification and 4000 verified occupational/industry hours within seven (7) years. OR * A related associate degree and 4000 verified occupational/industry hours within seven (7) years. OR * A related Bachelor's or any Master's degree with 18 discipline related credits and 2000 verified occupational/industry hours within seven (7) years. Related Degree, Credential, and/or Occupational Experience in:Welding, Mechanical Engineering, Industrial Arts, Machining or related Business Ownership/License Welcoming. Respectful. Inclusive. Together, we are FRCC. For information on Front Range Community College's Security, including Clery Act/Crime Statistics for the campuses and surrounding area, view FRCC's Annual Security Report.

Ranked by WalletHub.com and Intelligent.com as the #1 community college in New Jersey, Raritan Valley Community College has been serving as an academic and cultural center for Somerset and Hunterdon County residents for over 50 years. The College has been nationally recognized for its service to the community, environmental stewardship, and commitment to diversity. It is home to a Planetarium, Science Education Institute and 3M Observatory; a Theatre offering professional performances for all ages; and an Honors College for high achieving students. The College offers more than 90 associate degrees and certificates, as well as career training and professional development courses. RVCC is located at 118 Lamington Road in Branchburg, NJ. For further information, visit ******************* Job Description: Raritan Valley Community College is seeking a Part-Time Instructor for teaching AWS MIG welding in our Advanced Manufacturing department. We are seeking candidates that are reliable and able to work with attention to detail and safety standards. This unique opportunity to lead and motivate our students requires effective instruction in hard and soft skills that prepares students for long-term employment success. The instructor must be able to play a crucial role in our constantly growing and diverse program. Requirements: Minimum Qualifications: AWS D1.1 structural welding code certifications for carbon steel. Must exhibit careful attention to detail and display mature judgment. Proficient computer skills utilizing software such as Microsoft Office Suite (MS Word, Excel, PowerPoint, and Outlook). Preferred Qualifications: Proficient in the concepts and fundamentals and best education practice methods to teach atomic structure, grain structure, heat flow, phase transformations, welding metallurgy, and the weldability of ferrous commercial alloys. Knowledge of conventional milling. Additional Information: Work Schedule: Flexibility with schedule to cover evenings and weekends, as necessary. Application Instructions: As a New Jersey First Act Employer, new employees must establish a primary residence in New Jersey within one year unless an exemption applies. RVCC's starting salary is commensurate with educational qualifications and experience. We also offer an attractive benefits package. To review eligible health, wellness and benefits offered, click on the following link and scroll down: ************************************************************** For consideration of the above position, please submit your cover letter and resume online, by clicking the "apply now" button. We regret that we are unable to respond to each and every resume received. Only those candidates of interest will be contacted directly.

Welder - Structural This person must be able to join steel components or metal plates using blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: Uses Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc or Shielded Metal Arc welding processes. Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. Preheats work pieces for the preparation of welding or curving, using torch. Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. Climbs up ladders or works on scaffolds to take apart textures. In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. Other duties as assigned. Qualifications Required for this Position: Education - no minimum education requirements. Experience - 2-4 years of Journeyman level experience. Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Benefits & Compensation Austin Industrial is an Equal Opportunity Employer. See the “Know Your Rights” poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit https://www.austin-ind.com/what-we-do/industrial. No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( i.e. , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217.

Welder - Combination This person must be able to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: Uses spot welding gun or hand, electric, or gas welding equipment to weld or tack weld pieces together. Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. Preheats work pieces for the preparation of welding or curving, using torch. Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. Checks the weakness of work pieces and measures work pieces with straightedge or template to ensure the piece meets specifications. Climbs up ladders or works on scaffolds to take apart textures. Gives signal to crane operator to lift large work pieces. Uses thermal-cutting equipment such as flame-cutting torch or plasma-arc equipment to dismount metal assemblies or cut scrap metal. Uses hoist, crane, wire and banding machine, or hand tools to place and protect work pieces. In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. Instructs and brings flame or electrodes on or across work piece to straighten, curve, dissolve, or develop metal. Joins pieces together, covers up taut points, and adds metal to develop parts. Other duties as assigned. Qualifications Required for this Position: Education - no minimum education requirements. Experience - 3-5 years of Journeyman level experience. Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Benefits & Compensation Austin Industrial is an Equal Opportunity Employer. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit https://www.austin-ind.com/what-we-do/industrial. Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Benefits & Compensation See the “Know Your Rights” poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit https://www.austin-ind.com/what-we-do/industrial. No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( i.e. , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217.

Orlando Full-time and part-time day and evening positions are available The qualified candidate will have at least four years of experience in the welding field. At least an associate's degree is required. Prior teaching and/or training experience is preferred, but not required