Line maintenance technician job description

As a Maintenance Technician I , you will be responsible for coordinating tasks and supplies to prepare vacant units for re-occupancy effectively. You will also be responsible for helping the maintenance team with special projects.
The Maintenance Technician I is responsible for maintaining the overall condition of the property, including, but not limited to exteriors, common areas, vacant units, floor care, and trash removal, as well as for the property surrounding the building(s), including litter pick-up, janitorial duties, sidewalk clearing, and snow removal in a safe, attractive and comfortable condition. Performs preventative maintenance and corrective maintenance. Maintains relationships with current and prospective residents and any vendors working on site. The position reports to the Maintenance Supervisor (on properties with over 300 units) or the Property Manager (on properties with less than 300 units).


Responsibilities include but are not limited to:
• Clean/restore recently vacated apartment homes.
• Help maintain the cleanliness of the facility and grounds
• Change bulbs, locks/keys.
• Must be able to install or assist with the installation of appliances
• Exterior/ Interior painting and caulking, light drywall repair
• Ability to physically manage painting, pressure washing, blower breezeways, and parking lots


Effectively prepare vacant units for re-occupancy, including:
• Walkthrough upcoming or newly vacant units to forecast repairs.
• Walk completed units to create “punch” lists or quality control checklists.
• Assist with the removal of trash or belongings in vacant units.
• Perform quality control on all systems, appliances, and aesthetics (e.g., matching knobs, closet rods installed, blinds are the same color/style, etc.) to ensure the apartment meets move-in standards.
• Assist in prepping units for painting by performing breakdown and put-back of electric and switch plates and other items as assigned.
Assist with the diagnosis and assist with minor and routine maintenance/repair, as directed, involving, but not limited to:
• Electrical and plumbing (including water lines)
• A/C and heating systems (both electric and gas)
• Electric and gas appliances (washers, dryers, stoves, ovens, refrigerators, water heaters, etc.)


Aid with resident relation issues, including:
• Deliver resident notices throughout the property.
• Assist office staff in performing occupancy checks or investigating resident concerns.
• Maintain knowledge of make-ready and part inventory and inform Maintenance Technician Supervisor of needs.
• Assist in keeping make-ready supplies and parts well-stocked.
• Maintain accurate records regarding make-ready status and work-in-progress.
• Maintain cleanliness of uniform (if applicable), wear the badge (if applicable), and present a professional appearance.
• Assist in the organization and safety of the maintenance shop.
• Maintain essential control as per company/property policy.


Qualifications:
• One (1) year minimum of prior experience or related experience.
• Must have reliable transportation as necessary to safely and effectively carry out the responsibilities listed above.


Knowledge, skills, and abilities:
• Knowledge of apartment building maintenance.
• Knowledge and skilled in minor repairs and hand tool use.
• Demonstrated knowledge and ability to diagnose and repair routine maintenance issues.
• Knowledge and ability to operate power tools.
• Ability to manage difficult or emotional customer situations; respond promptly to customer needs; Solicit customer feedback to improve service; respond to requests for service and assistance; and meet commitments.
• Ability to prioritize and plan work activities; use time efficiently; plan for additional resources; set goals and objectives; and develop realistic action plans.
• Ability to focus on solving conflict, maintain confidentiality, and keep emotions under control.
• Ability to balance team and individual responsibilities; exhibit objectivity and openness to others’ views; give and welcome feedback; contribute to building a positive team spirit.
• Ability to follow instructions and respond to management directives.


Grooming & Uniform
• Must maintain a neat, clean, and well-groomed appearance. Distinctive uniforms must be worn at all times while on duty.


Physical Demands
• N (Not Applicable) Activity is not applicable to this position.
• O (Occasionally) Position requires this activity up to 33% of the time (0 - 2.5+ hrs/day)
• F (Frequently) Position requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day)
• C (Constantly) Position requires this activity more than 66% of the time (5.5+ hrs/day)




Physical Demands
Lift/Carry
Push/Pull
Stand - C
Grasp - C
10 lbs or less - C
12 lbs or less - C
Walk - C
Reach Outward - C
11-20 lbs - C
13-25 lbs C
Manually Manipulate - C
Reach Above Shoulder - C
21-50 lbs - C
26-40 lbs - C
Sit - O
Speak - C
51-100 lbs - O
41-100 lbs O
Climb - C
Crawl - C
Over 100 lbs - N
Squat or Kneel - C
Bend - C
Other Physical Requirements:
Vision - C
Comfortable working with heights up to 25 feet.
Ability to wear Personal Protective Equipment (PPE) - Hearing Protection


To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions.
Work Environment
Work is performed indoors and outdoors in a residential setting with regular exposure to cold, heat, noise, people, and equipment.


EOE/Disabled/Veterans Statement
We are an Equal Opportunity Employer. Each applicant for employment is considered solely on the basis of job qualifications, without regard to race, color, religion, sex, sexual orientation, genetic information, age, disability, national origin, veteran status, or any other classification protected by law.


Background Check Process
The information in your resume and application, including employment history, educational history, and credentials/certifications, are subject to verification.


Acknowledgment
This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the associate for this job. Duties, responsibilities, and activities may change at any time with or without notice.
The employee is expected to conduct all business following our Company Team Promises. Policies and procedures, employee handbook, and following Fair Housing laws(both federal and local), Americans with Disabilities Act, Fair Credit Reporting Act, OSHA, National Labor Relations Act, and all other laws of the multi-family industry.

1. With moderate supervision, inspects, performs basic troubleshooting, repairs, test, removes and replaces avionics and instrument wiring and systems installed in various airframes. Uses hand tools, test equipment and technical documents. Orders necessary parts to complete the job.

2. Performs basic checkout of aircraft systems that interface with avionics systems.

3. Enters description of work completed on the work order and properly documents removal and installation of aircraft parts and components according to approved data and Duncan approved procedures.

4. Assists bench technicians in the resolution of discrepancies in avionics and instrument components and systems removed from aircraft.

5. Accompanies flight crews to perform in-flight troubleshooting and adjustments and performs preflight evaluations of avionics and instrument systems.

6. Maintains and cleans line maintenance test equipment and work area as required. Operates ground support equipment as necessary.

7. Attends factory and company technical classes and participates in OJT to increase technical skills and proficiency. Maintains training log and keeps it updated.

8. Able to work all alternate shifts of the department as needed, and accomplish road trips within the United States and abroad as needed.

9. Performs other duties as assigned by management.

Job Specific Requirements

• Licenses/Certificates: Valid driver's license and acceptable driving record
• Attendance: Regularly scheduled attendance required
• Physical: Routinely lifts up to 50 lbs., occasionally up to 75 lbs.; read small print; identifies colors; repetitive motion; tolerates working in confined spaces and heights above four feet; tolerates products and materials associated with component maintenance; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting
• Environmental: Tolerates working in extreme temperatures and noisy environments
• Work Schedule : Must be available for all shifts

Education and Experience

Avionics Line Maintenance Technician I:

• High school graduate or equivalent required
• One year related Avionics or Electronics experience or Certification in Avionics, Electronics Technology, Airframe Maintenance or related field required

Avionics Line Maintenance Technician II:

• High school graduate or equivalent required
• Two to three years related Avionics, Electronics, Airframe Maintenance or related experience required

Avionics Line Maintenance Technician III:

• Associates degree or equivalent required
• Minimum five years related Avionics, Electronics, Airframe Maintenance or related experience required

Available Benefits

• Moving is expensive and hard work! Relocation Assistance is available for those that qualify.
• Duncan offers a comprehensive Benefits Package (Medical, Dental, Vision, Vacation/Holiday) that is available to team members on day one.
• Plan for your medical needs with a Health Savings Account (employer and employee contributions).
• Save for your future through our 401(k) program where you can begin contributions within your first 45 days, 50% match on first 6% contributed
• Participate in Duncan Aviation's Tool Account Program , to acquire & grow your Tool Inventory all while making interest free payments
• Take advantage of a variety of In-House Training opportunities, or use Tuition Assistance to further your education.
  
  

Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

With a network of nearly 200 branches, Loomis armored transportation, cash management centers, and cash inventory vaults keep cash flowing throughout financial institutions and retail businesses across the US. Loomis prides itself on providing employees with opportunities for career advancement and job satisfaction. In fact, many of our company's managers, vice presidents, and corporate executives started out in the branches as driver/guards and tellers. Our work can be challenging, but the thousands who have stayed with our company for decades will tell you that if you have the desire to learn and the drive to succeed, Loomis is the place to be. Come join our team!
The essential functions of this position are:

Armed Service Technicians will be responsible for the servicing and repair of ATM machines, including troubleshooting, resetting codes and data and possibly monetarily balancing the machine. The job will involve various times during the day, this includes some evenings and some weekends. This is an "on-call" position with no set hours.

* Deliver valuables to customers (banks, retail stores, restaurants, etc.). Interact with customers, representing the company in accordance with company standards, maintaining proper conduct, appearance (uniforms), personal hygiene, etc.
* Complete paperwork accurately and in accordance and in accordance with procedures.
* Maintain security awareness at all times.
* Perform necessary first line maintenance on the ATM machine at remote locations or at the customer branch.
* Other duties may be required.

The minimum Knowledge, Education, Experience, Skills, and/or Abilities required to perform this job are:

* Be at least 21 years of age, per Department of Transportation regulations.
* Possess a valid Driver's License and maintain current license with a good driving record.
* Ability to obtain a gun permit and be licensed by the state as an armed security officer, where necessary. (A criminal conviction may prevent issuance of a gun permit.)
* Experience in the security field and/or prior military is preferred.
* Must be able to qualify for any other work-related permits required by the operations center, such as Airport pass, Federal Reserve access, etc.
* Applicants must be able to read, write and communicate the English language and perform basic math skills. Must have good communication skills and be able to communicate with customers and communicate with team
* Must be able to use a "smartphone" to upload PDFs if necessary

The ATM Technician job duties require the following physical abilities:

* Carry a minimum of 50 pounds by hand up to several hundred yards by cart
* Loading/unloading cargo consisting of multiple bags and boxes of coin
* Unrestricted ability to bend, stoop, squat, stand, walk, climb, twist, turn and reach out
* Verbally communicate with customers and dispatch supervisors
* Record information on forms and reports
* Must be 21 years of age and must pass a comprehensive background check

Past and Present Military are encouraged to apply. Military experience is preferred.

Job Type: Part-time

Loomis is an Equal Opportunity Employer and Drug Free Workplace. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.

Other details

* Job Family ATM
* Job Function Armed Driver Guard
* Pay Type Hourly

Apply Now

* Georgia, USA
* Loomis Armored Fayetteville, GA, 190 Etowah, Trce, Fayetteville, Georgia, United States of America