Line Mechanic

Top Line Mechanic Skills

Below we've compiled a list of the most important skills for a Line Mechanic. We ranked the top skills based on the percentage of Line Mechanic resumes they appeared on. For example, 13.3% of Line Mechanic resumes contained Engine Changes as a skill. Let's find out what skills a Line Mechanic actually needs in order to be successful in the workplace.

The six most common skills found on Line Mechanic resumes in 2020. Read below to see the full list.

1. Engine Changes

high Demand
Here's how Engine Changes is used in Line Mechanic jobs:
  • Served as Aircraft Maintenance Representative on out-sourced, out of state contracted engine changes and structural/systems modifications.
  • Maintain Flight readiness of all aircraft, from tire changes to engine changes as well as gate calls.
  • Performed routine inspections, engine changes, Brake changes, tire changes and seat repairs.
  • Performed 50 and 100 hour inspections and engine changes.
  • Performed phase inspections and involved in engine changes.

Show More

2. Defective Parts

high Demand
Here's how Defective Parts is used in Line Mechanic jobs:
  • Replace defective parts of equipment Electrical/Mechanical.
  • Analyzed and inspected assembly process for defective parts, tools, and equipment, and substandard work.
  • Repaired or replaced defective parts using hand or power tools.
  • Inspected and maintained tools ensuring proper calibration Tagged defective parts to be inspected by quality team Trained new employees

Show More

3. Preventative Maintenance

high Demand
Here's how Preventative Maintenance is used in Line Mechanic jobs:
  • Perform maintenance, preventative maintenance and alterations on production and experimental aircraft systems and sub-systems.
  • Monitor equipment operations, follow preventative maintenance schedule in general upkeep of equipment.
  • Performed preventative maintenance on production equipment to extend equipment life and minimize downtime.
  • Performed Preventative Maintenance and Repairs on Machines to ensure consistent operation requirements.
  • Performed troubleshooting, changeovers, and preventative maintenance on machinery and equipment.
  • Performed preventative maintenance & major repairs on variety of construction equipment fleet.
  • Implemented preventative maintenance schedule for equipment used in factory.
  • Completed preventative maintenance; operated the sit-down forklift proficiently.
  • Reported problems for scheduling weekend preventative maintenance.
  • Complete weekly preventative maintenance of machines.
  • Conduct pressure readings and Preventative Maintenance.
  • Maintain equipment through preventative maintenance program.
  • Carry out preventative maintenance program.
  • Organize, review and schedule daily Work Orders (WO) and Preventative Maintenance (PM) work.
  • Do preventative maintenance on machines, clean and change molds, air valves, hoses.
  • Support Maintenance Department in conducting repairs and preventative maintenance to blow mold machines.
  • Performed preventative maintenance on all plant machinery and PLC/VFD controls.
  • Performed all preventative maintenance checks and services.
  • Conducted preventative maintenance to save man hours.
  • Performed troubleshooting, repairs and preventative maintenance on plant equipment including baggers, cartoners, conveyors and all related equipment.

Show More

4. Safety Procedures

high Demand
Here's how Safety Procedures is used in Line Mechanic jobs:
  • Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
  • Ensured safety procedures were followed.
  • Acquired extensive knowledge of Structural applications including carbon fiber build up, locating, repair, trimming, and safety procedures.
  • Practiced ground safety procedures in flight-line and hanger areas.
  • Implement airfield safety procedures to ensure a safe operating environment for personnel and aircraft opertaion.
  • FLIGHT LINE MECHANIC, F/A-18/Av8B/T-45 Knowledgeable on flight line processes and safety procedures.
  • plant closed) Train new mechanics and operators on safety procedures.

Show More

5. Production Machinery

high Demand
Here's how Production Machinery is used in Line Mechanic jobs:
  • Repaired all production machinery involved with manufacturing baked goods.
  • Maintained production machinery and performed PM maintenance as needed.
  • Performed daily Maintenance and Repair on food production machinery.
  • Job Responsibilities:Troubleshooting, Preventative Maintenance Change-Overs and Repair of High-Speed Food Production Machinery, Conveyor and Packaging Equipment.
  • Conduct regular preventive maintenance inspections of production machinery and tooling,auxiliary and support equipment.
  • Monitored production machinery/equipment operation to detect problems .

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Aircraft Parts

high Demand
Here's how Aircraft Parts is used in Line Mechanic jobs:
  • Monitored aircraft parts database and identified problem parts.
  • Performed incoming receiving inspection of aircraft parts.
  • Remove and replace all types of aircraft parts and systems components on many Modified aircraft in Wichita.
  • Researched and requisitioned aircraft parts in determining the reparability and serviceability of those assets.
  • Repaired and inspected aircraft parts to manufacturer's specification to be reinstalled.
  • Completed pre/post isochronal inspections and periodic documentation reviews, ordered aircraft parts and obtained engine oil samples as required.

Show More

7. Flight Control Systems

high Demand
Here's how Flight Control Systems is used in Line Mechanic jobs:
  • Flight Control Systems Flight Hydraulics Systems Flight Fueling Operations

Show More

8. Assembly Line

high Demand
Here's how Assembly Line is used in Line Mechanic jobs:
  • Perform daily maintenance, calibration and operator assistance for complex, fully automated robotic assembly line in a clean-room environment.
  • Maintained and Serviced assembly line equipment according to service schedules.
  • Perfect leadership skills I had with my crew to have assembly line running smooth and complete our daily and weekly goals.
  • Inspected, tested, and adjusted assembly line machines to ensure that they meet specifications.
  • Worked on an assembly line placing and securing exhaust manifolds onto boat engine's.
  • Started as entry-level operator on printers, assembly lines, and hot presses.
  • Work was performed on an assembly line with Lean Manufacturing principles.
  • Handled small part assembling and connecting tasks on the assembly line.
  • Maintained and repaired equipment on high speed assembly line.
  • Set up assembly line materials to insure production continuity.
  • Fast paced assembly line construction of semi trailers.
  • Ensured proper maintenance of assembly line products.
  • Employed as an assembly line mechanic.
  • Adjust can assembly line machines.
  • Assembled army trucks and trailers on assembly line Wiring electrical and brake systems to vehicles.
  • Have machine leave assembly line and on it's way to quality check.
  • Worked on various generations of assembly line equipment.
  • Build motors on assembly line.
  • Demonstrated ability to setup, operate, adjust, repair and overhaul assembly line machines and related equipment.
  • Worked on a assembly line position at Stihl Saw as an mechanic.

Show More

9. Production Equipment

high Demand
Here's how Production Equipment is used in Line Mechanic jobs:
  • Provided Production line maintenance repair and support for various production equipment to ensure minimum downtime and maximum reliability.
  • Performed preventative maintenance on production equipment in compliance with good manufacturing practices, safety and audit standards.
  • Set up and operated production equipment in accordance with current good manufacturing practices and standard operating procedures.
  • Conduct preventative maintenance and repairs ensuring automated production equipment is operable prior to their scheduled start time.
  • Repaired all production equipment as needed, including breakdown analysis.
  • Repair and troubleshoot electrical controls on production equipment.
  • Performed troubleshooting and repair of all production equipment
  • Supply materials to production equipment.
  • Perform routine maintenance on production equipment (Filled oil reservoirs, greased moving parts, replaced bad bearings, etc.)
  • Invented, Fabricated, and Installed production equipment accessories to join two separate/independent machines to work as one.
  • Operated, maintained, repaired and troubleshot production equipment in sterile filling environment and on packaging lines.
  • Installed, assembled and repaired production equipment requiring review of drawings, electrical diagrams and blueprints.
  • Repaired and modified high-speed production equipment in a food grade environment.
  • Maintained, repaired & modified all plant & production equipment
  • Perform changeovers and set-ups on all production equipment.
  • Complete Welding and Fabrication of all Production Equipment.
  • Performed mechanical repairs and preventive maintenance on all production equipment as well as operated equipment
  • Maintain, repair, service,install and rebuild production equipment.
  • team player in the operation, maintenance and repair of Krones production equipment on both lines.
  • plant closed) Maintained all high-speed production equipment.

Show More

10. Hand Tools

high Demand
Here's how Hand Tools is used in Line Mechanic jobs:
  • Assemble and install electrical, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
  • Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
  • Assemble Nose Wheel Well side panels*Drill Holes*Installation of Hi-locks, Rivets, & Collars* Use of hand tools and squeezes
  • Utilize standard hand tools, special tooling, pneumatic powered torque wrenches and close tolerance measuring devices.
  • Use of a variety of pneumatic, power and hand tools was required.
  • Power tools, hand tools, and air tools used to work product.
  • Selected the proper hand tools for removing and replacing turbine engine parts.
  • Use basic hand tools and fabrication skills to repair equipment.
  • Skilled to use the common hand tools and lift weights up to 60 pounds.
  • Use of hand tools and power tools to perform the job at hand.
  • Hand tools:Drills, jigsaw, grinder, etc.
  • Use of Basic hand tools.
  • Assembled close tolerance parts and uses personal hand tools Performed maintenance on P3 T56 engines, propellers and their control systems.
  • Utilized hand tools including wrenches, torque wrenches and micrometers.
  • Used hand tools to replacedefective equipment parts.
  • used all typs of hand tools, and test eqipment.Ordered parts from venders, kept invantory of all parts.

Show More

11. Hydraulic Systems

high Demand
Here's how Hydraulic Systems is used in Line Mechanic jobs:
  • Minimized equipment downtime through PM & troubleshooting electrical, mechanical and hydraulic systems.
  • Job duties included installation of hydraulic systems, environmental control systems, fire protection systems, and oxygen systems.
  • Repair Mechanical, electrical pumps, and pneumatic, hydraulic systems, AC/DC motors and Gear drives.
  • Perform operational checks and inspections on flight control, landing gear, and utility hydraulic systems.
  • Changed tires, Brake systems, Serviced Hydraulic systems as needed, according to Manual.
  • Inspect hydraulic systems for leaks and unusual wear.
  • Remove and replaced engines, interior work, tires changes, brake changes, serviced hydraulic systems etc.

Show More

12. Electrical Systems

high Demand
Here's how Electrical Systems is used in Line Mechanic jobs:
  • Repaired and diagnosed complex electrical systems.
  • Worked on Electrical systems and components
  • Diagnosed and repaired, air brake systems, body electrical systems, A/C systems, diesel and gasoline injection systems.
  • Repair and service air conditioning, heating, engine-cooling, and electrical systems.
  • Deal with pneumatic, hydraulic and electrical systems within the production lines.
  • Repair, rewire, and troubleshoot electrical systems.
  • Trouble shoot & repair electrical systems1.
  • Worked with various electrical systems.
  • Performed flightline troubleshooting and repairs to Boeing 757 and 727, and Douglas DC-9 avionics and electrical systems.
  • Experienced with PLC's, HVACAnd Electrical Systems.

Show More

13. Avionics

high Demand
Here's how Avionics is used in Line Mechanic jobs:
  • Verified modifications and operational checkout of aircraft and avionics systems.
  • Assisted avionics crew in electrical troubleshooting and repairs.
  • Install avionics modifications with blueprints and schematics.
  • Work with Engineers to develop new hydraulic and avionics systems, Submit daily progress reports to senior management and customers.
  • Taxied, performed engine runs, serviced and repaired Boeing 757 Aircraft to include avionics.
  • Conducted avionics instruction and troubleshooting training for Boeing 767, 757, and DC9 aircraft.
  • Have also crossed trained for the past year in avionics.
  • Completed Beech 1900D Collins Avionics System Training.
  • Installed new antennas, fiber optic wiring, new Hydraulic lines, new ECS system and avionics wiring.
  • Removed and replaced Line removable units (LRU'S) Avionics equipment on all aircrafts.
  • performed all mechanical and avionics repairs on various airline maintenance contracts and aircraft suchas 727 737's.
  • performed all mechanical and avionics repairs on the airport line mx on DC-8 & 727 aircraft.
  • Hold an inspector rating on pitot static, and certificate for avionics.

Show More

14. Airframe

high Demand
Here's how Airframe is used in Line Mechanic jobs:
  • Accomplished final operational checkout for conformance to customer specifications of prototype and new electronic systems including system installation on new airframes.
  • Performed all airframe, power plant and propeller repairs and modifications required to meet company and FAA requirements.
  • Assisted in training less skilled Aircraft Mechanics in the repair and maintenance of airframes and engines.
  • Acquired extensive experience with rain test, including detection and rectification of troublesome airframe leaks.
  • Performed tests and inspections of aircraft engines in and out of airframe.
  • Assembled sheet metal airframe components for Citation static test article airplanes.
  • Patched / repaired metal and fabric-covered parts of airframes.
  • Provided flight line and airframe systems/subsystems support to program.
  • Entered notations in aircraft engine and airframe logbooks.
  • Repaired and fabricated sheet metal parts for airframes.
  • Serviced landing gear, hydraulic systems, airframes.
  • Inspect airframes for wear or other defects.
  • Line maintenance, including airframe and engine.
  • Test and airframe and fuselage components.
  • Supported durability and static test of airframes for cycle time inspections and documented all airframe failures for engineering evaluation.
  • Performed flight line support, fueling/defueling operations, daily/periodic inspections and airframe systems/subsystems maintenance.
  • Served as a technical authority to advise on, inspect and approve all airframe, mechanical avionics and pneudraulic repairs.
  • Serviced, maintained, and repaired single and multi-engine aircraft engines and airframes on fixed-wing and/or rotary wing aircraft.
  • Flight Test mechanic on F-22 and C-130 J Airframes.Aircraft assembler of F-22 and C-130J Aircraft.
  • Trouble shoot electrical, hydraulic, avionics, engine systems and other airframe systems.

Show More

15. PLC

average Demand
Here's how PLC is used in Line Mechanic jobs:
  • Maintain assembly-line machinery consisting of pneumatic, hydraulic and electrical PLC.
  • Maintain and repair PLC automated, electronic, pneumatic and mechanical machinery.
  • Work with PLC to maintain lines running and troubleshooting problems.
  • Updated PLC controllers and machine processes.
  • Maintained and worked with 480 v VFD, Bradley PLC, and high-speed robots.
  • Diagnose hydraulic and pneumatic failures for printing presses, replace damaged air lines and troubleshoot complex Plc failures.
  • Programmed plc and electrical programs that ran operating systems for the aircraft.
  • Program and use of PLCs, MMIs, and Allen Bradley interfaces.

Show More

16. Set-Up

average Demand
Here's how Set-Up is used in Line Mechanic jobs:
  • Completed total line changeover including component accountability, label accountability, and line set-up.
  • Monitored, set-up, adjusted, repaired and maintain high-speed pharmaceutical packaging machinery.
  • Completed all set-up/changeovers according to production schedule.
  • Advanced my position into line mechanics by change over and mold set-up and changed hydraulic and pneumatic lines.
  • Perform tooling set-ups to include molds, inserts, trim tools, BIF counter, etc.
  • Change set-ups and measure parts to specific job order.
  • Line changeovers and set-ups on high speed filling equipment.
  • Perform set-up and shutdown on production line equipment.
  • Cross-trained to set-up and repair filling equipment in a clean room atmosphere.Dates Employed Job Title Company
  • Repaired, Set-up and Maintained "Multivac"pac.

Show More

17. Line Equipment

average Demand
Here's how Line Equipment is used in Line Mechanic jobs:
  • Experienced with the execution of packaging line equipment qualifications.
  • Set up, maintain and repair during operation, assembling line equipment according with GMP's and standard operating procedures.
  • Set up, operate, maintain and repair production line equipment to meet production and safety goals.
  • Installed power wiring and power line equipment used to deliver service to residential and business customers.
  • Tasked with the installation of new pole and line equipment and maintenance of existing equipment.
  • Maintained various production line machines, Electrical trouble-shooting, Installation of new production line equipment.
  • Repair and maintain production line equipment Keep line running efficiently to meet production goals.
  • Rebuild off line equipment, rebuild spare parts, and fabricate new parts.
  • Research & order repair parts required to update & revise production line equipment.
  • Trouble shoot and diagnose line equipment problems.
  • Repair line equipment and escalate as needed.
  • Manage line equipment and operator support.
  • Promoted from line mechanic where responsibilities included maintenance & troubleshooting of production line equipment.
  • Maintained, Service, Repaired Factory Line Equipment such as: Air Conditioning and Heating Systems.
  • Maintained, trouble shot and repaired line equipment Performed preventive maintenance to reduce down-time
  • Perform changeovers and repair high speed packaging line equipment, including De-palletizers, Fillers, Seamers, Packers and Palletizers.

Show More

18. Fuel Systems

average Demand
Here's how Fuel Systems is used in Line Mechanic jobs:
  • Monitored the highest level of maintenance pertaining to engines, gearboxes, oil systems, fuel systems and blades.
  • Serviced fuel systems, engines, gearboxes, and blades.
  • Experienced at calibrating fuel systems.
  • hoist, cargo hook, and auxiliary fuel systems.
  • Install engines, hydraulics, pneumatics, fuel systems.
  • include servicing fuel systems on Boeing 737-300,800 & 757-200,300.

Show More

19. Airbus

average Demand
Here's how Airbus is used in Line Mechanic jobs:
  • Performed phase maintenance, modifications and repair on Boeing 737, 727,747, DC-10 and Airbus A-300 fleets.
  • Line maintenance B737, B757, and airbus A320/319 systems operation and engine run/taxi/trim qualified.
  • Performed overnight checks and scheduled and unscheduled maintenance on Airbus 319 and 320 aircraft.
  • Resolved customer (Boeing and Airbus) issues during their internal source acceptance process.
  • Maintained entire fleet of AirBus, Boeing and McDonnell Douglas Aircraft.
  • Line Mechanic doing Heavy C-check mechanic working on Airbus A-318/319/320
  • Involved in all phases of line maintenance for Boeing 747, 727, 707, Airbus A300 and A310 aircraft.
  • Performed overnight checks on airbus A320, A319, B757 and DC9.
  • United Airbus A-320 depot maintenance, C & D line.

Show More

20. FAA

average Demand
Here's how FAA is used in Line Mechanic jobs:
  • Performed quality assurance tasks between Customer and FAA, configuration change verification, conformity inspections, and airworthiness inspections.
  • Assisted with the organization and order of work areas, observing all current applicable FAA regulations and company policies and procedures.
  • Sustained compliance with internal and FAA inspection and documentation requirements by working closely with team leads, managers and inspectors.
  • Line maintenance mechanic is also responsible for inspection and evaluation of aircraft interiors and exteriors to FAA standards.
  • Perform Line aircraft maintenance in accordance with Manufacturer AMM, FAA regulations and World Airways Policies and Procedures
  • Complete all tasks to the quality standards of the FAA and customers approved maintenance manual.
  • Conducted all inspections and repairs in accordance with FAA mandates.
  • Maintained Company and FAA required records and inspection forms.
  • Maintain records for FAA certification compliance.
  • Completed TIA Certification through FAA.
  • Coordinate with stm and the inspection department to ensure compliance with internal and FAA inspection.
  • Out of Business Contact Wayne Skaggs with FAA see Ref.

Show More

21. Trouble Shooting

average Demand
Here's how Trouble Shooting is used in Line Mechanic jobs:
  • Ground turn, trouble shooting, tracking and balancing of dynamic components, daily and turnaround inspection for the test aircrews.
  • Conducted training for 70+ members of the military on theory of operations, trouble shooting, and maintenance of CH-53E systems.
  • Chip and Filter checks, 1500 hour inspections, Trouble Shooting Engine related problems, Red ball team
  • Trouble shooting line for improvements and made suggestion on how to eliminate shrinkage.
  • Trouble shooting, bleeding, and servicing of hydraulic systems.
  • Assist Production in trouble shooting equipment in the Manufacturing Plant.
  • Trouble shooting, removal and replacement of aircraft components.
  • Assist line operators with trouble shooting of minor issues.
  • Trouble shooting DC Motors and Drives.
  • Trouble shooting problems with Machinery.
  • Service all vehicles, suspensions, general repair,alignment, Hydraulic pumps, heavy equipment mechanic and Electrical trouble shooting.
  • Trouble shooting production line equipment used in the manufacturing of automobiles.Leslie Salt, Newark, Ca.
  • Repair and maintenance of electric and pneumatic assembly line Teamwork and leadership Trouble shooting and problem solving
  • Power train and Drive train major repairs and overhaul) Engine, Transmission, Driveline, and electrical diagnostics and trouble shooting
  • Trouble shooting food processing equipment and line changeovers, and preventive maintenance.New United Motors, Fremont, Ca.
  • set up of extruders, conveyors, grotes, double grotes, tobys, webers as well as trouble shooting.

Show More

22. Service Checks

average Demand
Here's how Service Checks is used in Line Mechanic jobs:
  • Performed hydraulic component replacement during periodic service checks.
  • Performed service checks, worked inbound discrepancies, scheduled maintenance, and worked MEL/DMI as needed.
  • Maintained aircraft by performing transit and service checks, along with A&B checks.
  • Performed service checks, worked inbound discrepancies, and scheduled maintenance on line aircraft.
  • Performed A and B checks, in- service checks, and serviced and repaired DC-9-10, 30, 50 series aircraft.
  • Line Mechanic performing scheduled A checks, B checks, and service checks on DC9 aircraft.
  • Performed "A" Checks, Periodic Service Checks and Over-Water Checks on the AmericanAirlines Fleet.
  • Performed Service checks and "A" checks.

Show More

23. DC-9

average Demand
Here's how DC-9 is used in Line Mechanic jobs:
  • Performed Line Maintenance inspections and non routine maintenance on Boeing 727, Boeing 737 and McDonnell Douglas DC-9
  • Out station line mechanic relief, Aircraft taxi on B727, and DC-9.
  • Performed Line Maintenance Performed Inspections and Troubleshooting on the McDonnell Douglas DC-9 and Boeing 727
  • Line maintenance for various commercial airlines servicing DC-9, Boeing 727, 737, 757, F-100 and MD-80 aircraft.
  • unscheduled maintenance on all B727-100, 200, DC-9, and B737-300 systems.
  • Trained and performed line maintenance on commercial aircraft ranging from DC-9 through MD-11.Returned to contract maintenance position in Dothan, AL.

Show More

24. MIG

average Demand
Here's how MIG is used in Line Mechanic jobs:
  • Metal fabrication through TIG & MIG welding, band saw cutting, oxy-acetylene torch-Cutting, Drill Press, Tap-Die Cutting.
  • Set up of wrapping, plumbing, welding, fabrication of stainless and aluminum by using both mig and tig.
  • Bag houses, chillers, induction furnaces, air and hydraulic systems, welding with mig tig and stick.

Show More

25. Customer Service

average Demand
Here's how Customer Service is used in Line Mechanic jobs:
  • Provided comprehensive customer service in ensuring reported vehicle problems were appropriately/technically corrected in accordance with specific company policies/directives.
  • Ensured good customer service and maintained data spreadsheet
  • Answer phones, made hotel reservations and rental car arrangements for pilot's, made credit card payments, customer service
  • Maintain job site safety, setup job site, traffic control, job site delineation, and customer service.
  • Completed turnaround checks, customer service, trained coworker's and vendors.
  • Handled customer service, marketing, shipping and receiving.
  • Provided customer service; quoting and processing sales orders.
  • Exceeded customer service by recommending only repairs actually to customer's vehicles without upselling unnecessary items.
  • Direct customer service Inspect and repair cars as necessary
  • Maintain packaging conveyor, cases and bottles labeler, Extensive customer services towards other plant departments.

Show More

26. Technical Manuals

average Demand
Here's how Technical Manuals is used in Line Mechanic jobs:
  • Trained in troubleshooting system malfunctions utilizing the proper technical manuals and trained personal in these procedures.
  • Established troubleshooting plans for atypical discrepancies using operational technical manuals and wire schematics.
  • Plan work procedures, using charts, technical manuals, and experience.
  • Interpret aircraft technical manuals, and electrical drawings.
  • Removed, inspected, and reinstalled parts in accordance with technical manuals.

Show More

27. Oil Changes

average Demand
Here's how Oil Changes is used in Line Mechanic jobs:
  • General Line Technician, major and minor services including: transmission and engine repairing and replacing, oil changes, etc.
  • Preformed brake inspections, oil changes, minor electrical repairs and mounted, balanced and installed tires on vehicles.
  • Performed oil changes, lubes, and coolant changes.
  • Performed Oil Changes, Tire Rotations and Tire Balancing.
  • Light diagnostic and oil changes.
  • Perform routine and scheduled maintenance services such as oil changes, lubrications and tune-ups.

Show More

28. Heavy Equipment

average Demand
Here's how Heavy Equipment is used in Line Mechanic jobs:
  • Performed shop and field service work on heavy equipment, industrial power systems, marine generator and main propulsion systems.
  • Repair trucks, trailers and heavy equipment including tires, wheels, seals and air leaks.
  • Used overhead cranes and heavy equipment such as fork lifts and bobcats.
  • Operate and inspect machines or heavy equipment to diagnose defects.
  • Operate machinery and heavy equipment, such as forklifts.
  • Repair and Maintenance of Heavy Equipment
  • Cleaned equipment or machinery, and assisted with moving heavy equipment .

Show More

29. Test Procedures

average Demand
Here's how Test Procedures is used in Line Mechanic jobs:
  • Performed on aircraft test procedures (OATP) prior to and after flight of modified, experimental and production aircraft.

Show More

30. Osha

low Demand
Here's how Osha is used in Line Mechanic jobs:
  • Follow all of AEP's and OSHA's safety requirements as well as complete all mandated training.
  • Assured that all OSHA standards, and shop safety precautions were followed while performing vehicle maintenance.
  • Trouble shot, tested and grounded wiring following OSHA and company safety procedures and guidelines.
  • Checked and responsible for any gas or sulfur leaks as required by OSHA.
  • Cleaned and maintained the warehouse in compliance with OSHA safety standards.
  • Insured that the line and workstations were within OSHA standards.
  • Collaborated with the on site Government Inspection department to insure compliance with Federal and OSHA requirements.
  • Complete all assigned tasks following cGMPs, OSHA and other Federal and State Regulations

Show More

31. Ground Support Equipment

low Demand
Here's how Ground Support Equipment is used in Line Mechanic jobs:
  • Maintained powered ground support equipment and non-powered stationary equipment.
  • Operated aircraft ground support equipment including tow vehicles, deicer trucks, man lifts and fork lifts.
  • Operated ground support equipment including Aviation Ground Power Unit, hydraulic mule, and Christie.
  • Used and performed operator maintenance on tools, special tools and aircraft ground support equipment.
  • Qualified to operate ground support equipment to perform maintenance of installed systems.
  • Operated ground support equipment, such as aircraft tugs, overhead cranes and precision calibrated tools on a daily basis *USMC-Corporal
  • Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.

Show More

32. A320

low Demand
Here's how A320 is used in Line Mechanic jobs:
  • Ensured on time departure of A320, A330, DC-9, 757, 747, 767 aircraft.
  • Completed all overnight maintenance on A319, A320, 737 and 757 aircrafts.
  • Performed maintenance on Mexicana B727-200, A320's and Aeromexpress B727-200F's.

Show More

33. TIG

low Demand
Here's how TIG is used in Line Mechanic jobs:
  • Investigate possible problems and manage solutions accordingly
  • Attached pieces, tighten screws, installed parts, and polished surfaces.
  • Investigated critical control systems failures and identified problems and resolved the problems in a timely manner.
  • Performed (pre/post) flight corrective action and investigations.

Show More

34. Md80

low Demand
Here's how Md80 is used in Line Mechanic jobs:
  • Accomplished line and all heavy phase maintenance inspections on DC8, A300, B727, B737, MD80 and KC10 aircraft.
  • Worked through flight maintenance on 737, DC9/MD80 and EMB-145 aircraft.

Show More

35. APU

low Demand
Here's how APU is used in Line Mechanic jobs:
  • Performed maintenance and corrected write-ups from Auxiliary Power Unit (APU) change to reading light on jet aircraft.

Show More

36. Gear Boxes

low Demand
Here's how Gear Boxes is used in Line Mechanic jobs:
  • Worked with plumbing, hydraulic and pneumatic equipment, conveyors, wrappers, gear boxes, bearings, belts and rollers.
  • Remove, and replace gear boxes, dampers, drive shafts, engines, and landing gear components.
  • Repaired and installed motors, pumps, gear boxes, controllers, VFDs, starters, and all line equipment.
  • Removed, replaced and repaired flight critical components such as engines, driveshafts, rotor heads and gear boxes.
  • Prevented maintenance on conveyors, motors, gears, gear boxes, and filling machines Help design machines

Show More

37. General Maintenance

low Demand
Here's how General Maintenance is used in Line Mechanic jobs:
  • Interfaced with the Line Manager and completed engine run up and general maintenance functions on Corporate B-737 Aircraft.
  • Performed engine repair and overhaul, transmission repairs, and required general maintenance.
  • Performed general maintenance such as oil changes and tire rotations and balancing.
  • General maintenance of conveyors, elevators and wrappers.
  • General maintenance of all equipment and electrical systems Performed preventative maintenance on production lines.
  • Assembled lift trucks Provided general maintenance and repair for lift trucks Operated over-head crane Operated drill press, sanders, and grinders

Show More

38. Cessna

low Demand
Here's how Cessna is used in Line Mechanic jobs:
  • Reason for leaving Cessna; AAR offered old position, no loss in time, and a raise in pay.
  • Maintained Cessna Citation X & 560 models
  • Light and Heavy checks on Fokker F27-500s, Cessna C-208s, and Shorts SD3-30s.
  • Ground support on experimental Cessna 182 and 208 Caravan; performed pre-flight and post flight Inspections per Cessna manual checklist.

Show More

39. CRJ

low Demand
Here's how CRJ is used in Line Mechanic jobs:
  • Performed routine overnight inspections, repaired items found and insured aircraft was safe for flight on CRJ200,700 type aircraft.
  • Worked as a line maintenance technician on p/w 150, bombardier CRJ 700 and Q400.
  • Inspected, repaired and returned to service Boeing 737,757, MD80, CRJ200,700 type aircraft.
  • Timed maintenance interchanges and inspections on CRJ 900's & 200's.
  • Performed line maintenance on CRJ 200 and 700 series aircraft.
  • Worked primarily on Bombardier CRJ 200.
  • Search AMM, IPC, and solved problem on CRJ-900, and ERJ-145 aircraft.
  • Perform Overnight Scheduled maintenance including, Routine Checks Service Checks, Clearing MELS, Clear Open Write ups on CRJ-200, CRJ-700
  • Serviced ERJ 175/CRJ 700/900 Performed scheduled and unscheduled maintenance.
  • Perform daily maintenance on CRJ200, CRJ700, CRJ900, and Dehav Dash-8 aircraft.
  • Perform overnight maintenance, A checks, trouble-shooting electrical and mechanical issues, and cover road trips on CRJ-900s.
  • performed daily maintenance, inspections, and specializied in sheet metal repairs to CRJ's and P-41 aircraft
  • Perform line maintenance on CRJs Continued airworthiness maintenance back shop support

Show More

40. RII

low Demand
Here's how RII is used in Line Mechanic jobs:
  • Performed periodic inspection RII duties while performing line maintenance on Northwest Airlines fleet.
  • Full engine run & taxi qualifications and full RII authority.
  • Line Avionics & Mechanic with ATR42-500 Turbo Prop, ATR72-500 RII inspection authorized
  • experience; AS350 fx2, R44 RII, R22.
  • Job Duties: Maintain FedEx Turboprop airplane fleet RII Inspection Authorization Run/Taxi Authorization, ATR42 and ATR72 aircraft

Show More

41. Pneumatic Systems

low Demand
Here's how Pneumatic Systems is used in Line Mechanic jobs:
  • Perform schedule and unscheduled mechanical maintenance as required including structures work, engine work, and hydraulic and pneumatic systems work.
  • Repair mechanical equipment including pumps, gear reducers, seals, bearings, hydraulic/pneumatic systems, blowers, and conveyors.
  • Diagnose, adjust, repair, or overhaul aircraft engines and assemblies, such as hydraulic and pneumatic systems.
  • Performed preventive maintenance as needed, troubleshoot Pneumatic systems, removed and replaced components as needed.
  • Monitor electrical, mechanical, and pneumatic systems.
  • Perform servicing of aircraft hydraulic and pneumatic systems.
  • Worked with hydraulic and pneumatic systems.
  • Diagnose and repair Pneumatic systems.

Show More

42. System Components

low Demand
Here's how System Components is used in Line Mechanic jobs:
  • Removed and replaced system components, cut and fit system lines and associated hardware necessary to facilitate and perform repairs.
  • Performed scheduled and unscheduled maintenance on Engine, Drive System, Fuel System, and Prop Rotor System components.
  • Repair, remove, service or replace hydraulic system components, gauges, and instruments.
  • Gas Turbine troubleshooting including electronic controls, compressor blades, and combustion system components.
  • Assembled, installed, and adjusted aircraft structure parts and system components.

Show More

43. Operational Checks

low Demand
Here's how Operational Checks is used in Line Mechanic jobs:
  • Serviced aircraft oil, fuel, and appropriate filters and performed operational checks using single bay station.
  • Examined vehicles, started, performed necessary operational checks to detect malfunctions in various systems.
  • Perform operational checks and maintain aircraft forms, records, and compliance documentation.
  • Performed troubleshooting and operational checks on all systems of the B-747.
  • Conduct system operational checks and minor avionics duties.
  • Performed Engine runs and operational checks.
  • Performed troubleshooting and operational checks on all systems of B737-800, B757 and MD80 aircraft.

Show More

44. Gulfstream

low Demand
Here's how Gulfstream is used in Line Mechanic jobs:
  • Worked with Gulfstream Human Resources and was featured on set of training videos used for corporate level HR new hires.
  • Performed all levels of maintenance on Gulfstream II, III, and IV aircraft.
  • Pressurized Gulfstream GIV & GV aircraft for certification of FFA requirements.

Show More

45. R

low Demand
Here's how R is used in Line Mechanic jobs:
  • Performed and supervised all relevant maintenance and inspections to prepare aircraft for airworthiness certificate and customer delivery.
  • Provided new service to residential and commercial customers.
  • Performed major aircraft component removal and replacement.
  • Repaired street lights using FARE system to locate faults and tracking the pattern of the underground triplex from the transformer.
  • Assist the line crew in traffic control by driving company trucks during power outages, problem solving with electrical issues.
  • Utilized my technical knowledge and experience in performing all aircraft functional test and mechanical system checks.
  • Performed daily and overnight checks on Boeing 727, 757, DC-9 transport category aircraft.
  • Install and remove molding tooling as need for jobs and clean machine for color changes.
  • Repaired and/or installed manual transmissions, clutches, Detroit locker and Warn hub systems.
  • Installed new foundations, shift under traffic, and moved poles with wires attached.
  • Repair and set all sensor and photo eyes on machine, tracks and belts.
  • Set heat, speed and pressures to form quality production per job order.
  • Operated balancing equipment and manual lathes; performed welding and fabrication.
  • Work safely in digging underground wires, setting poles and anchors.
  • Complete work orders /RCA's from machine operators and QA.
  • Completed PM's to ensure maximum efficiency.
  • Installed power lines and signal transmission systems.
  • Conduct a steady workflow with a team of technicians performing accurate and quality maintenance repairs while problem solving.
  • Assist customers with in-coming and out-going equipment and show customers how to operate equipment being rented
  • Maintained an airvayor system, empty bottle, full bottle system and multiple conveyors.

Show More

46. Hvac

low Demand
Here's how Hvac is used in Line Mechanic jobs:
  • Provide preventative maintenance on all HVAC units including reclaiming refrigerant.
  • Assist HVAC technician in ensuring sound operation of all HVAC system, air conditioning units and all chiller.
  • Well rounded mechanic-Front end, suspension, brakes, electrical, HVAC, computer, State Inspections.
  • Maintained electrical and plumbing systems, HVAC, RTUs, cooling towers, chillers and PLC interfacing.

Show More

47. Embraer

low Demand
Here's how Embraer is used in Line Mechanic jobs:
  • Perform line maintenance of company aircraft including the Embraer 140, 170 and 190 series aircraft.
  • Maintained airworthiness of airline aircraft Embraer 170, 175, 190 and Bombardier Q400.
  • Performed scheduled and unscheduled maintenance to company fleet of Embraer 170 series aircraft.
  • Provide line maintenance for Embraer 170 & 190 Aircraft and Bombardier Q400 Aircraft
  • Received training for Embraer 170-195.
  • Performed maintenance on Embraer 145, Boeing 737, 747 and DC -10, and L-1011 aircraft.
  • Completed the following training courses: o Bombardier Canadair Regional Jet 40/50 seat 4 week school o Embraer 120 2 week school

Show More

48. Conveyor Systems

low Demand
Here's how Conveyor Systems is used in Line Mechanic jobs:
  • Installed, maintained and repaired machinery, filling lines, sorters and conveyor systems.
  • Modified machines and conveyor systems to meet production demands.
  • Maintain various conveyor systems across plant floor.

Show More

49. Control Surfaces

low Demand
Here's how Control Surfaces is used in Line Mechanic jobs:
  • Removed, inspected, and installed T56 engines, flight control surfaces, and hydraulic power systems and related components.
  • Rigged control cables, sectors, linkages, control surfaces, landing gear and doors, engines.
  • Performed rigging for flight control surfaces.

Show More

50. New Equipment

low Demand
Here's how New Equipment is used in Line Mechanic jobs:
  • Collaborated with engineers to overcome manufacturing problems associated with the production of new equipment.
  • Completed assigned schedules and instructions for installing new equipment on production floor to support production efficiency and needs.
  • Provide assistance to more skilled line mechanics in the adjustment, maintenance and part replacement of new equipment.
  • Maintain Diffusion equipment, performed preventive maintenance, installed new equipment, trouble shoot and repair equipment.
  • Welded to repair broken metal parts, fabricated new parts and assembled new equipment.
  • Overhaul and install new equipment, rebuild, fabricate, and machine parts.
  • Construct new equipment working from print, drawing, sketches, and samples.
  • Installed new equipment to diversify lines in order to run new products.
  • Install and test new equipment for the fleet aircraft.
  • Installed new equipment, both electrical and mechanical.
  • Performed installation and wiring of new equipment.
  • Weld and fabricate broken and new equipment.
  • Installed new equipment and trained Mechanics.

Show More

20 Most Common Skill for a Line Mechanic

Engine Changes17%
Defective Parts12.5%
Preventative Maintenance10.8%
Safety Procedures9.5%
Production Machinery7.9%
Aircraft Parts6.2%
Flight Control Systems6.1%
Assembly Line4.4%

Typical Skill-Sets Required For A Line Mechanic

RankSkillPercentage of ResumesPercentage
1
1
Engine Changes
Engine Changes
13.3%
13.3%
2
2
Defective Parts
Defective Parts
9.8%
9.8%
3
3
Preventative Maintenance
Preventative Maintenance
8.5%
8.5%
4
4
Safety Procedures
Safety Procedures
7.5%
7.5%
5
5
Production Machinery
Production Machinery
6.2%
6.2%
6
6
Aircraft Parts
Aircraft Parts
4.9%
4.9%
7
7
Flight Control Systems
Flight Control Systems
4.8%
4.8%
8
8
Assembly Line
Assembly Line
3.5%
3.5%
9
9
Production Equipment
Production Equipment
2.5%
2.5%
10
10
Hand Tools
Hand Tools
2%
2%
11
11
Hydraulic Systems
Hydraulic Systems
2%
2%
12
12
Electrical Systems
Electrical Systems
1.9%
1.9%
13
13
Avionics
Avionics
1.8%
1.8%
14
14
Airframe
Airframe
1.7%
1.7%
15
15
PLC
PLC
1.7%
1.7%
16
16
Set-Up
Set-Up
1.6%
1.6%
17
17
Line Equipment
Line Equipment
1.4%
1.4%
18
18
Fuel Systems
Fuel Systems
1.2%
1.2%
19
19
Airbus
Airbus
1.2%
1.2%
20
20
FAA
FAA
1.2%
1.2%
21
21
Trouble Shooting
Trouble Shooting
1.1%
1.1%
22
22
Service Checks
Service Checks
1.1%
1.1%
23
23
DC-9
DC-9
1%
1%
24
24
MIG
MIG
0.9%
0.9%
25
25
Customer Service
Customer Service
0.9%
0.9%
26
26
Technical Manuals
Technical Manuals
0.9%
0.9%
27
27
Oil Changes
Oil Changes
0.8%
0.8%
28
28
Heavy Equipment
Heavy Equipment
0.8%
0.8%
29
29
Test Procedures
Test Procedures
0.8%
0.8%
30
30
Osha
Osha
0.8%
0.8%
31
31
Ground Support Equipment
Ground Support Equipment
0.8%
0.8%
32
32
A320
A320
0.7%
0.7%
33
33
TIG
TIG
0.7%
0.7%
34
34
Md80
Md80
0.7%
0.7%
35
35
APU
APU
0.7%
0.7%
36
36
Gear Boxes
Gear Boxes
0.6%
0.6%
37
37
General Maintenance
General Maintenance
0.6%
0.6%
38
38
Cessna
Cessna
0.6%
0.6%
39
39
CRJ
CRJ
0.6%
0.6%
40
40
RII
RII
0.6%
0.6%
41
41
Pneumatic Systems
Pneumatic Systems
0.6%
0.6%
42
42
System Components
System Components
0.6%
0.6%
43
43
Operational Checks
Operational Checks
0.6%
0.6%
44
44
Gulfstream
Gulfstream
0.6%
0.6%
45
45
R
R
0.6%
0.6%
46
46
Hvac
Hvac
0.6%
0.6%
47
47
Embraer
Embraer
0.6%
0.6%
48
48
Conveyor Systems
Conveyor Systems
0.6%
0.6%
49
49
Control Surfaces
Control Surfaces
0.5%
0.5%
50
50
New Equipment
New Equipment
0.5%
0.5%

24,469 Line Mechanic Jobs

Where do you want to work?